Petrolchimico Alimentare Milano, 29 novembre 2012!
SSE - Sirio Sistemi Elettronici Company Profile Niccolò Paoli Business Development
Facts Year of Establishment : 1984 Share Capital, fully paid-up : 1.766.666 Certification : ISO 9001-2008 Headquarters : Via Fleming,16, Prato, Italy Offices & Training Facilities : 1.200 m 2 Manufacturing & Testing Area : 1.600 m 2 Outdoor Area : 3.000 m 2 Group HC : 130 (75 Italy, 55 Abroad)
Headquarters
Mission Design, manufacturing, software development, installation, commissioning and start-up of Control and Supervisory Systems as well Integrated Engineered Solutions & Services, serving its Customers with rigorous focus on HSE, quality, new products and advanced technology.
Worldwide Localization ALGERIA S.A.R.L. Sirio Sistemi Elettronici El-Djazair ITALY Sirio Sistemi Elettronici SPA KAZAKHSTAN Zeinet & SSE LLP BRASIL Sírio Sistemas Eletrônicos LTDA IRAQ (Branch) Sirio Sistemi Elettronici SPA BAHRAIN SSE Middle East SPC
Products Turn-key Control Solutions for Rotating Machinery and Industrial Plants. Unit Control System for Hazardous Area. Integrated Engineered Solutions. Upgrading, Retrofitting, Revamping.
Field Services Field Service & After Sales assistance with qualified service engineers for: Supervision of Commissioning & Start-up of Rotating Machinery & Industrial Plants. Field Inspections, Performance Monitoring and Troubleshooting. Consultancy for Efficiency Improvement and Machinery Performance Optimization.
Control Systems Design, Software Development, Production, Commissioning and Start-up of Unit Control Systems of Compressors, Turbines and Industrial Plants. Integrated Compressors Control System Algorithms for Anti-Surge Protection and Control, Load Sharing, Performance Control. Integrated Turbo Generator Control Systems Synchronization Algorithms for Isochronous and Droop Control, Power Management System, Load Sharing and Load Shadding.
System Technology Integration CENTRAL CONTROL ROOM DCS INTEGRATION GATEWAY CM LOCAL CONTROL ROOM OPERATOR INTERFACE (HMI) TURBINE PLC F&G ESD VIBRATION DRIVER MONITOR FIELD Gas Turbine Steam Turbine Moto- Compressor
SSE Academy SSE Academy is a permanent Training Program to educate I&C Maintenance and Design Engineers of Rotating Machinery and Industrial Plants. SSE Academy learning modules tailored for state of the art growth of Customers as well SSE select resources. Balanced theoretical and practical classes performed at SSE premises.
SSE provides structured training to Operation and Maintenance Engineers: At Customer site or at SSE Training Center. On the Job. By Trainers with state of the art knowledge properly balanced by field experience background. With Dynamic Simulators routinely used at SSE Training Center. Operation & Maintenance Training
Some References
Engineered Solution Case History End-user decided to Upgrade Steam Turbine driven Refrigerating Compressor Sets of Lube Oil Plant Section of Refinery. SSE is successfully providing Integrated Engineered Solution carrying out below tasks: Site Survey. Engineering of I&C and mechanical upgrading. Supervision of Installation, Commissioning and Start-up with: - Control System Upgrade (including I/H converter) increasing Controller reaction time and System reliability and accuracy as well reducing Turbo-compressor Down-time. - State of the Art Over-speed devices improving Turbocompressor Safety and Reliability. - Upgraded Anti-surge System resulting in enhanced Compressor and Process Performance.
Centrifugal compressor control panel Control, anti-surge and performance control panel for recycle centrifugal compressor train Control panel manufacturing based on Rittal TS8 modular type cabinet
Centrifugal compressor control panel Project with N 3 compressor trains. Each compressor train is composed by: - N 3 Unit Control Panels - N 3 Local Control Panels - N 3 Antisurge panels - N 1 Trainview panel Control panel construction based on Rittal TS8 modular type cabinet.
Inlet gas compressor station control panel Project with N 4 compression station (gas turbine driven centrifugal compressor) Control panel construction based on Rittal TS8 modular type cabinet
Control System for Crude Oil Rehabilitation Project This plant manages crude oil treatment from head till oil storage pumping into crude oil export pipeline Project with N 11 Control Cabinets
Pressurized local control panel for Hazardous area class I division II group B, C, D temperature T3. Pressurization system type Z Local control panel for gas compressors
SSE Awards Since 2011, SSE is a Certified UL manufacturer able to apply the UL mark. E303245 Industrial Control Panels SSE can supply industrial Control Panel UL marked E345536 Control Panels and Assemblies for Use in Hazardous Locations Industrial Control Panel UL marked for Hazardous location with one of the following protection method: A) Purged / Pressurized type Z or X B) Explosion Proof C) Class I Division II devices E347086 Industrial Control Panels Relating to Hazardous Locations Industrial Control Panel UL marked for Hazardous Location with the use of Intrinsically Safe method
Thank you for your attention