ISO PROJETOS EM VOTAÇÂO JANEIRO E FEVEREIRO ISO/IEC JTC 1 - Information Technology ATÉ 20 DE FEVEREIRO DE 2017 ISO/IEC DIS 21964-1 - Information technology -- Office machines -- Destruction of data carriers -- Part 1: Principles and definitions ISO/IEC DIS 21964-2 - Information technology -- Office machines -- Destruction of data carriers -- Part 2: Requirements for equipment for destruction of data carriers ISO/IEC DIS 21964-3 - Information technology -- Office machines -- Destruction of data carriers -- Part 3: Process of destruction of data carriers ATÉ 01 DE MARÇO DE 2017 ISO/IEC DIS 30134-4 - Information technology -- Data centres -- Key performance indicators -- Part 4: IT Equipment Energy Efficiency for servers (ITEEsv) ATÉ 02 DE MARÇO DE 2017 ISO/IEC DIS 30134-5 - Information technology -- Data centres -- Key performance indicators -- Part 5: IT equipment utilization for servers (ITEUsv) ATÉ 19 DE MARÇO DE 2017 ISO/IEC DIS 14165-151 - Information technology -- Fibre channel -- Part 151: BaseT ATÉ 23 DE MARÇO DE 2017 ISO/IEC DIS 7816-9 (Ed 3) - Identification cards -- Integrated circuit cards -- Part 9: Commands for card management ISO/IEC DIS 2382-36 (Ed 3) - Information technology -- Vocabulary -- Part 36: Learning, education and training ATÉ 26 DE MARÇO DE 2017 ISO/IEC 21000-19:2010/DAmd 1 - Information technology -- Multimedia framework (MPEG-21) -- Part 19: Media Value Chain Ontology -- Amendment 1: Extensions on time-segments and multitrack audio ATÉ 29 DE MARÇO DE 2017 ISO/IEC 14496-12:2015/DAmd 2 - Information technology -- Coding of audio-visual objects -- Part 12: ISO base media file format -- Amendment 2: Support for Image File Format
ISO/IEC 14496-27:2009/DAmd 7 - Information technology -- Coding of audio-visual objects -- Part 27: 3D Graphics conformance -- Amendment 7: Printing material and 3D graphics coding for browsers conformance ISO/IEC 14496-30:2014/DAmd 1 - Information technology -- Coding of audio-visual objects -- Part 30: Timed text and other visual overlays in ISO base media file format -- Amendment 1: Support for CTA-708 captioning in SEI messages ISO/IEC 23001-11:2015/DAmd 2 - Information technology -- MPEG systems technologies -- Part 11: Energy-efficient media consumption (green metadata) -- Amendment 2: Conformance and reference software ISO/IEC DIS 23000-19 - Information technology -- Multimedia application format (MPEG-A) -- Part 19: Common media application format (CMAF) ISO/IEC DIS 23009-6 - Information technology -- Dynamic adaptive streaming over HTTP (DASH) -- Part 6: DASH with server push and websockets ATÉ 30 DE MARÇO DE 2017 ISO/IEC DIS 24570 (Ed 2) - Software engineering -- NESMA functional size measurement method -- Definitions and counting guidelines for the application of function point analysis ISO/IEC DIS 19286 - Identification cards -- Integrated circuit cards -- Privacy-enhancing protocols and services ISO/IEC DIS 27007 (Ed 2) - Information technology -- Security techniques -- Guidelines for information security management systems auditing ISO/IEC DIS 27019 - Information technology -- Security techniques -- Information security controls for the energy utility industry ISO/IEC DIS 27021 - Information technology -- Security techniques -- Competence requirements for information security management systems professionals ISO/IEC DIS 23008-6 - Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 6: 3D Audio reference software ATÉ 02 DE ABRIL DE 2017 ISO/IEC 29170-2:2015/DAmd 1 - Information technology -- Advanced image coding and evaluation -- Part 2: Evaluation procedure for nearly lossless coding -- Amendment 1: Parameters for nearly lossless coding of high dynamic range m... ISO/IEC 29170-2:2015/DAmd 2 - Information technology -- Advanced image coding and evaluation -- Part 2: Evaluation procedure for nearly lossless coding -- Amendment 2: Evaluation procedure for nearly lossless coding of image sequ... ATÉ 03 DE ABRIL DE 2017
ISO/IEC DIS 29003 - Information technology -- Security techniques -- Identity proofing. ISO/TC 6 - Paper, board and pulps ATÉ 02 DE MARÇO DE 2017 ISO/DIS 287 (Ed 4) - Paper and board -- Determination of moisture content of a lot -- Oven-drying method ATÉ 14 DE MARÇO DE 2017 ISO/DIS 4094 (Ed 3) - Paper, board and pulps -- General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 ISO/TC 8 - Ships and marine technology ATÉ 02 DE MARÇO DE 2017 ISO/DIS 16304 (Ed 2) - Ships and marine technology -- Marine environment protection -- Arrangement and management of port waste reception facilities ATÉ 05 DE MARÇO DE 2017 ISO/DIS 20233-1 - Ships and marine technology -- Model test method for propeller cavitation noise evaluation in ship design -- Part 1: Source level estimation ATÉ 21 DE MARÇO DE 2017 ISO/DIS 20154 - Ships and marine technology -- Guidelines on vibration isolation design methods for shipboard auxiliary machinery ISO/TC 10 Technical product documentation ATÉ 02 DE FEVEREIRO DE 2017 ISO/DIS 81346-12.2 - Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 12: Construction works and building services ATÉ 21 DE FEVEREIRO DE 2017 ISO/DIS 129-5 - Technical product documentation (TPD) -- Presentation of dimensions and tolerances -- Part 5: Dimensioning of structural metal work ISO/TC 12 Quantities and units ATÉ 21 DE MARÇO DE 2017 ISO/DIS 20155 - Ships and marine technology -- Test method of flow induced in-pipe noise source characteristics for a ship-used pump
ATÉ 27 DE MARÇO DE 2017 ISO/DIS 80000-9 (Ed 2) - Quantities and units -- Part 9: Physical chemistry and molecular physics ISO/DIS 80000-11 (Ed 2) - Quantities and units -- Part 11: Characteristic numbers ISO/TC 17 Steel ATÉ 16 DE FEVEREIRO DE 2017 ISO/DIS 19203 - Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables Specifications ATÉ 20 DE FEVEREIRO DE 2017 ISO/DIS 4829-1 (Ed 2) - Steels -- Determination of total silicon contents -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 % and 1,0 % ATÉ 16 DE MARÇO DE 2017 ISO/DIS 9328-1 (Ed 4) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirement ISO/DIS 9328-2 (Ed 4) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties ISO/DIS 9328-3 (Ed 4) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized ISO/DIS 9328-4 (Ed 4) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties ISO/DIS 9328-5 (Ed 4) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled ISO/DIS 9328-6 (Ed 3) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered ISO/DIS 9328-7 (Ed 3) - Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels ISO/TC 20 Aircraft and space vehicles ATÉ 27 DE MARÇO DE 2017 ISO/DIS 21100 (Ed 2) - Aircraft ground equipment -- Performance requirements and test parameters ATÉ 29 DE MARÇO DE 2017
ISO/DIS 19924 - Space systems -- Acoustic testing ISO/TC 21 Equipment for fire protection and fire fighting ATÉ 21 DE FEVEREIRO DE 2017 ISO/DIS 7240-27 (Ed 2) - Fire detection and alarm systems -- Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors ISO/TC 22 - Road vehicles ATÉ 21 DE FEVEREIRO DE 2017 ISO/DIS 19206-1 - Road vehicles -- Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions -- Part 1: Requirements for passenger vehicle rear-end targets ISO/DIS 19206-2 - Road vehicles -- Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions -- Part 2: Requirements for pedestrian targets ATÉ 23 DE FEVEREIRO DE 2017 ISO/DIS 12156-2 (Ed 3) - Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 2: Limit ATÉ 13 DE MARÇO DE 2017 ISO/DIS 20077-2 - Road Vehicles - Extended vehicle (ExVe) methodology -- Part 2: Methodology for designing the extended vehicle ATÉ 28 DE MARÇO DE 2017 ISO/DIS 16673 (Ed 2) - Road vehicles -- Ergonomic aspects of transport information and control systems -- Occlusion method to assess visual demand due to the use of in-vehicle systems ISO/TC 23 - Tractors and machinery for agriculture and forestry ATÉ 28 DE FEVEREIRO DE 2017 ISO/DIS 16119-5 - Agricultural and forestry machinery -- Environmental requirements for sprayers -- Part 5: Aerial spray systems ATÉ 23 DE MARÇO DE 2017
ISO/DIS 789-1 (Ed 3) - Agricultural tractors -- Test procedures -- Part 1: Power tests for power take-off ISO/DIS 789-2 (Ed 4) - Agricultural tractors -- Test procedures -- Part 2: Rear three-point linkage lifting capacity ISO/DIS 789-9 (Ed 2) - Agricultural tractors -- Test procedures -- Part 9: Power tests for drawbar ISO/DIS 789-13 - Agricultural tractors -- Test procedures -- Part 13: Terms and definitions ATÉ 28 DE MARÇO DE 2017 ISO 5395-1:2013/DAmd 1 - Garden equipment -- Safety requirements for combustion-enginepowered lawnmowers -- Part 1: Terminology and common tests -- Amendment 1: Annex G (Vibration test code -- Hand-arm vibration and Whole-b... ISO/DIS 25119-1 (Ed 2) - Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 1: General principles for design and development ISO/DIS 25119-2 (Ed 2) - Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 2: Concept phase ISO/DIS 25119-3 (Ed 2) - Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 3: Series development, hardware and software ISO/DIS 25119-4 (Ed 2) - Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 4: Production, operation, modification and supporting processes ISO/TC 28 - Petroleum products and related products of synthetic or biological origin ATÉ 20 DE MARÇO D E2017 ISO/DIS 6578 (Ed 2) - Refrigerated hydrocarbon liquids -- Static measurement -- Calculation procedure ISO/TC 34 - Paints and varnishes ATÉ 26 DE FEVEREIRO DE 2017 ISO/DIS 13484 - Molecular biomarker analysis -- General requirements for molecular biology analysis for detection and identification of plant pests ATÉ 05 DE MARÇO DE 2017 ISO/DIS 20635 - Infant formula and adult nutritionals -- Determination of vitamin C by (ultra) high performance liquid chromatography with ultraviolet detection ((U)HPLC-UV) ATÉ 16 DE MARÇO DE 2017 ISO 11746:2012/DAmd 1 - Rice -- Determination of biometric characteristics of kernels -- Amendment 1
ISO 11747:2012/DAmd 1 - Rice -- Determination of rice kernel resistance to extrusion after cooking -- Amendment 1 ISO/TC 38 Textiles ATÉ 06 DE MARÇO DE 2017 ISO/DIS 15487 (Ed 3) - Textiles -- Method for assessing appearance of apparel and other textile end products after domestic washing and drying ISO/TC 41 Pulleys and belts (including veebelts) ATÉ 14 D EMARÇO DE 2017 ISO/DIS 17396 (Ed 2) - Synchronous belt drives -- Metric pitch -- Tooth profiles T and AT endless and open ended belts and pulleys ISO/TC 43 - Acoustics ATÉ 14 DE MARÇO DE 2017 ISO/DIS 389-1 (Ed 2) - Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones ATÉ 23 DE MARÇO DE 2017 ISO/DIS 3822-3 (Ed 3) - Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for inline valves and appliances ISO/TC 44 - Welding and allied processes ATÉ 12 DE FEVEREIRO DE 2017 ISO/DIS 17633.2 (Ed 3) - Welding consumables -- Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels Classification ISO/DIS 544 (Ed 5) - Welding consumables -- Technical delivery conditions for filler materials and fluxes -- Type of product, dimensions, tolerances and markings ATÉ 13 DE MARÇO DE 2017 ISO/DIS 18275 (Ed 3) - Welding consumables -- Covered electrodes for manual metal arc welding of high- strength steels Classification ATÉ 23 DE MARÇO DE 2017
ISO/DIS 24373 (Ed 2) - Welding consumables -- Solid wires and rods for fusion welding of copper and copper alloys -- Classification ATÉ 27 DE MARÇO DE 2017 ISO/DIS 26304 (Ed 3) - Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels -- Classification ISO/TC 61 - Plastics ATÉ 23 DE FEVEREIRO DE 2017 ISO/DIS 15064 (Ed 3) - Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate (TDI) ATÉ 12 DE MARÇO DE 2017 ISO/DIS 15023-2 (Ed 2) - Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties ATÉ 21 DE MARÇO DE 2017 ISO/DIS 19821 - Determination of span rating for natural fiber-reinforced plastic composite (NFC) deck boards ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ATÉ 22 DE FEVEREIRO DE 2017 ISO/DIS 35106 - Petroleum and natural gas industries -- Arctic operations -- Metocean, ice, and seabed data ATÉ 13 DE MARÇO DE 2017 ISO/DIS 35104 - Petroleum and natural gas industries -- Arctic operations -- Ice management ISO/TC 69 - Applications of statistical methods ATÉ 23 DE FEVEREIRO DE 2017 ISO/DIS 7870-1 (Ed 3) - Control charts -- Part 1: General guidelines ISO/TC 71 Concrete, reinforced concrete and pre-stressed concrete ATÉ 05 DE MARÇO DE 2017 ISO/DIS 1920-5 (Ed 2) - Testing of concrete -- Part 5: Density and water penetration depth ISO/TC 79 - Light metals and their alloys
ATÉ 08 DE MARÇO DE 2017 ISO/DIS 10074 (Ed 3) - Anodizing of aluminium and its alloys -- Specification for hard anodic oxidation coatings on aluminium and its alloys ISO/DIS 2931 (Ed 4) - Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance ATÉ 20 DE MARÇO DE 2017 ISO/DIS 7599 (Ed 3) - Anodizing of aluminium and its alloys -- Method for specifying decorative and protective anodic oxidation coatings on aluminium ISO/TC 82 Mining ATÉ 15 DE MARÇO DE 2017 ISO/DIS 19434 - Mining -- Classification of mine accidents ISO/TC 83 Sports and other recreational facilities and equipment ATÉ 30 DE MARÇO DE 2017 ISO/DIS 6003 (Ed 3) - Alpine skis -- Determination of mass and polar moment of inertia -- Laboratory measurement method ISO/DIS 7138 (Ed 2) - Cross-country skis -- Determination of mass and location of balance point ISO/DIS 7139 (Ed 2) - Cross-country skis -- Determination of elastic properties ISO/DIS 7798 (Ed 2) - Cross-country skis -- Determination of fatigue indexes -- Cyclic loading test ISO/TC 84 - Devices for administration of medicinal products and catheters ATÉ 19 DE FEVEREIRO DE 2017 ISO/DIS 7886-3 (Ed 2) - Sterile hypodermic syringes for single use -- Part 3: Auto-disabled syringes for fixed-dose immunization. ISO/TC 85 Nuclear energy, nuclear technologies, and radiological protection ATÉ 06 DE FEVEREIRO DE 2017 ISO/DIS 12807 (Ed 2) - Safe transport of radioactive materials -- Leakage testing on packages ATÉ 19 DE FEVEREIRO DE 2017 ISO/DIS 19461-1 - Radiological protection -- Measurement for the clearance of waste contaminated with radioisotopes for medical application -- Part 1: Measurement of radioactivity
ATÉ 05 DE MARÇO DE 2017 ISO/DIS 14146 (Ed 2) - Radiological protection -- Criteria and performance limits for the periodic evaluation of dosimetry services ATÉ 14 DE MARÇO DE 2017 ISO/DIS 16647 - Nuclear facilities -- Criteria for design and operation of confinement systems for nuclear worksite and for nuclear installations under decommissioning ATÉ 16 DE MARÇO DE 2017 ISO 16793:2005/DAmd 1 - Nuclear fuel technology -- Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination -- Amendment 1 ISO/TC 89 - Wood-based panels ATÉ 30 DE MARÇO DE 2017 ISO/DIS 12460-2 - Wood-based panels -- Determination of formaldehyde release -- Part 2: Smallscale chamber method ISO/TC 92 Fire safety ATÉ 23 DE FEVEREIRO DE 2017 ISO/DIS 20902-1 - Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries -- Part 1: General requirements ISO/TC 94 Personal safety -- Protective clothing and equipment ATÉ 08 DE MARÇO DE 2017 ISO/DIS 17832 (Ed 2) - Non-parallel steel wire and cords for tyre reinforcement ISO/DIS 11393-1 (Ed 2) - Protective clothing for users of hand-held chain-saws -- Part 1: Test rig for testing resistance to cutting by a chain-saw ISO/DIS 11393-2 (Ed 2) - Protective clothing for users of hand-held chainsaws -- Part 2: Performance requirements and test methods for leg protectors ISO/DIS 11393-3 (Ed 2) - Protective clothing for users of hand-held chain-saws -- Part 3: Test methods for footwear ISO/DIS 11393-4 (Ed 2) - Protective clothing for users of hand-held chain-saws -- Part 4: Test methods and performance requirements for protective gloves ISO/DIS 11393-5 (Ed 2) - Protective clothing for users of hand-held chain-saws -- Part 5: Test methods and performance requirements for protective gaiters
ISO/DIS 11393-6 (Ed 2) - Protective clothing for users of hand-held chain-saws -- Part 6: Test methods and performance requirements for upper body protectors ISO/DIS 16975-3.2 - Respiratory protective devices -- Selection, use and maintenance -- Part 3: Fit testing procedures ATÉ 14 DE MARÇO DE 2017 ISO/DIS 18639-6 - PPE ensembles for firefighters undertaking specialist rescue activities -- Part 6: Footwear ISO/DIS 17723-1 - PPE ensembles for firefighters undertaking hazardous materials response activities -- Part 1: Gas-tight, vapor-protective ensembles for emergency response teams ("type 1") ATÉ 16 DE MARÇO DE 2017 ISO/DIS 16900-2 (Ed 2) - Respiratory protective devices -- Methods of test and test equipment -- Part 2: Determination of breathing resistance ISO/TC 96 Cranes ATÉ 30 DE MARÇO DE 2017 ISO/DIS 8686-3 (Ed 2) - Cranes -- Design principles for loads and load combinations -- Part 3: Tower cranes ISO/TC 102 Iron ore and direct reduced iron ATÉ 08 DE MARÇO DE 2017 ISO/DIS 22682 - Iron ores -- Determination of trace elements -- Plasma spectrometric method ISO/TC 106 - Dentistry ATÉ 02 DE FEVEREIRO DE 2017 ISO/DIS 18618.2 - Dentistry -- Interoperability of CAD/CAM systems ATÉ 26 DE FEVEREIRO DE 2017 ISO 20126:2012/DAmd 1 - Dentistry -- Manual toothbrushes -- General requirements and test methods -- Amendment 1 ISO/ TC 108 - Mechanical vibration, shock and condition monitoring ATÉ 21 DE FEVEREIRO DE 2017 ISO/DIS 16063-44 - Methods for the calibration of vibration and shock transducers -- Part 44: Calibration of field vibration calibrators
ISO/TC 117 Fans ATÉ 09 DE MARÇO DE 2017 ISO/DIS 12759-3 - Fans -- Efficiency classification for fans -- Part 3: Fans without drives at maximum operating speed ISO/TC 118 Compressors and pneumatic tools, machines and equipment ATÉ 14 DE MARÇO DE 2017 ISO/DIS 28927-13 - Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 13: Fastener driving tools ISO/TC 120 Leather ATÉ 16 DE FEVEREIRO DE 2017 ISO/DIS 17551 - Leather -- Pickled sheep pelts -- Guidelines for grading on the basis of defect and size ATÉ 19 DE FEVEREIRO DE 2017 ISO/DIS 11410 - Leather -- Guidelines for packaging of wet blue leather ISO/TC 122 - Packaging ATÉ 16 DE MARÇO DE 2017 ISO/DIS 20848-3 (Ed 2) - Packaging -- Plastics drums -- Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l ISO/TC 130 Graphic technology ATÉ 21 DE FEVEREIRO DE 2017 ISO/DIS 20690 - Graphic technology -- Guidelines to determine the operating power consumption of digital printing devices ATÉ 19 DE MARÇO DE 2017 ISO/DIS 17972-4 (Ed 2) - Graphic technology -- Colour data exchange format (CxF/X) -- Part 4: Spot colour characterisation data (CxF/X-4) ISO/TC 133 - Clothing sizing systems - size designation, size measurement methods and digital fittings ATÉ 14 D EMARÇO DE 2017 ISO/DIS 18890 - Clothing -- Standard method of garment measurement
ISO/TC 135 - Non-destructive testing ATÉ 01 DE MARÇO DE 2017 ISO/DIS 16809 (Ed 2) - Non-destructive testing -- Ultrasonic thickness measurement ISO/TC 138 - Plastics pipes, fittings and valves for the transport of fluids ATÉ 15 DE MARÇO DE 2017 ISO/DIS 161-1 (Ed 4) - Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series ATÉ 30 DE MARÇO DE 2017 ISO 13260:2010/DAmd 1 - Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading -- Amendment 1 ISO/TC 145 - Graphical symbols ATÉ 22 DE MARÇO DE 2017 ISO 7010:2011/DAmd 188 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 188: Safety sign E021: Protection shelter ISO 7010:2011/DAmd 189 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 189: Safety sign P044: Use of smart glasses prohibited ISO 7010:2011/DAmd 190 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 190: Safety sign F007: Fire protection door ISO 7010:2011/DAmd 191 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 191: Safety sign M050: Alighting from toboggan to the left ISO 7010:2011/DAmd 192 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 192: Safety sign M051: Alighting from toboggan to the right ISO 7010:2011/DAmd 193 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 193: Safety sign M052: Keep distance between toboggans ISO 7010:2011/DAmd 195 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 195: Safety sign P046: Do not stretch out of toboggan ISO 7010:2011/DAmd 196 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 196: Safety sign P047: Do not ram into toboggans ISO 7010:2011/DAmd 197 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 197: Safety sign W042: Warning; Arc flash
ISO 7010:2011/DAmd 198 - Graphical symbols -- Safety colours and safety signs -- Registered safety signs -- Amendment 198: Safety sign P043: Not for people in the state of intoxication ISO/TC 150 - Implants for surgery ATÉ 07 DE MARÇO DE 2017 ISO/DIS 5910 (Ed 2) - Cardiovascular implants and extracorporeal systems -- Cardiac valve repair devices ATÉ 23 DE MARÇO DE 2017 ISO 14242-3:2009/DAmd 1 - Implants for surgery -- Wear of total hip-joint prostheses -- Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for.. ATÉ 27 DE MARÇO DE 2017 ISO/DIS 14243-5 - Implants for surgery -- Wear of total knee prostheses -- Part 5: Durability performance of the patellofemoral joint -- Loading and displacement parameters for testing machines and corresponding envir... ATÉ 02 DE ABRIL DE 2017 ISO/DIS 5832-2 (Ed 4) - Implants for surgery -- Metallic materials -- Part 2: Unalloyed titanium. ISO/TC 154 - Processes, data elements and documents in commerce, industry and administration ATÉ 23 DE MARÇO DE 2017 ISO/DIS 8601-1 - Data elements and interchange formats -- Information interchange -- Representation of dates and times -- Part 1: Basic rules ISO/DIS 8601-2 - Data elements and interchange formats -- Information interchange -- Representation of dates and times -- Part 2: Extensions ISO/TC 159 - Ergonomics ATÉ 22 DE FEVEREIRO DE 2017 ISO/DIS 9241-11.2 (Ed 2) - Ergonomics of human-system interaction -- Part 11: Usability: Definitions and concepts ISO/TC 161 Controls and protective devices for gas and/or oil ATÉ 05 DE MARÇO DE 2017 ISO/DIS 23551-7 - Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 7: Pressure sensing controls
ISO/TC 163 - Thermal performance and energy use in the built environment ATÉ 16 DE FEVEREIRO DE 2017 ISO/DIS 18523-2 - Energy performance of buildings -- Schedule and condition of building, zone and space usage for energy calculation -- Part 2: Residential buildings ISO/TC 168 - Prosthetics and orthotics ATÉ 03 DE ABRIL DE 2017 ISO/DIS 21063 - Prosthetics and orthotics -- Soft orthoses -- Uses, functions, classification and description ISO/DIS 21064 - Prosthetics and orthotics -- Foot orthotics -- Uses, functions classification and description ISO/DIS 21065 - Prosthetics and orthotics -- Terms relating to the treatment and rehabilitation of persons having a lower limb amputation. ISO/TC 172 - Optics and photonics ATÉ 27 DE FEVEREIRO DE 2017 ISO/DIS 11553-1 (Ed 2) - Safety of machinery -- Laser processing machines -- Part 1: General safety requirements ISO/DIS 11553-2 (Ed 2) - Safety of machinery -- Laser processing machines -- Part 2: Safety requirements for hand-held laser processing devices ISO/TC 173 - Assistive products for persons with disability ATÉ 21 DE FEVEREIRO DE 2017 ISO/DIS 7176-2.2 (Ed 3) - Wheelchairs -- Part 2: Determination of dynamic stability of electrically powered wheelchairs ISO/TC 181 - Safety of toys ATÉ 19 DE MARÇO DE 2017 ISO 8124-4:2014/DAmd 1 - Safety of toys -- Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use -- Amendment 1 ISO/TC 182 - Geotechnics ATÉ 23 DE MARÇO DE 2017 ISO/DIS 17892-12 - Geotechnical investigation and testing -- Laboratory testing of soil -- Part 12: Determination of liquid and plastic tests
ISO/TC 189 - Ceramic tile ATÉ 13 DE MARÇO DE 2017 ISO/DIS 10545-3 (Ed 2) - Ceramic tiles -- Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density ISO/DIS 13006 (Ed 3) - Ceramic tiles -- Definitions, classification, characteristics and marking ISO/TC 201 - Surface chemical analysis ATÉ 26 DE FEVEREIRO DE 2017 ISO/DIS 19668 - Surface chemical analysis -- X-ray photoelectron spectroscopy -- Estimating and reporting detection limits for elements in homogeneous materials ISO/TC 202 Microbeam analysis ATÉ 16 DE FEVEREIRO DE 2017 ISO/DIS 20263 - Microbeam analysis -- Analytical transmission electron microscopy -- Determination method for interface position in the cross-sectional image of the layered materials ISO/TC 205 Building environment design ATÉ 26 DE MARÇO DE 2017 ISO/DIS 11855-6 (Ed 2) - Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 6: Control ISO/TC 207 - Environmental management ATÉ 28 DE FEVEREIRO DE 2017 ISO 14044:2006/DAmd 1 - Environmental management -- Life cycle assessment -- Requirements and guidelines -- Amendment 1 ATÉ 01 DE MARÇO DE 2017 ISO/DIS 14026 - Environmental labels and declarations -- Principles, requirements and guidelines for communication of footprint information ISO/TC 209 Cleanrooms and associated controlled environments ATÉ 09 DE MARÇO DE 2017 ISO/DIS 14644-3 (Ed 2) - Cleanrooms and associated controlled environments -- Part 3: Test methods ISO/TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ATÉ 16 DE MARÇO DE 2017 ISO/DIS 20186-1 - Molecular in vitro diagnostic examinations -- Specifications for preexamination processes for venous whole blood -- Part 1: Isolated cellular RNA ISO/DIS 20186-2 - Molecular in vitro diagnostic examinations -- Specifications for preexamination processes for venous whole blood -- Part 2: Isolated genomic DNA correct ISO/TC 213 - Dimensional and geometrical product specifications and verification ATÉ DIA 11 DE AGOSTO DE 2015. ISO/DIS 14405-3.2 - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes. ATÉ DIA 11 DE SETEMBRO DE 2015. ISO/DIS 17450-4 - Geometrical product specification (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying form, orientation, location and runout deviation. ISO/DIS 25178-71 (Ed 2) - Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards. ISO/DIS 5458 (Ed 3) - Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional and pattern tolerancing. ISO/TC 220 Cryogenic vessels ATÉ 13 DE MARÇO DE 2017 ISO/DIS 21010 (Ed 3) - Cryogenic vessels -- Gas/material compatibility ATÉ 15 DE MARÇO DE 2017 ISO/DIS 21029-1 (Ed 2) - Cryogenic vessels -- Transportable vacuum insulated vessels of not more than 1 000 litres volume -- Part 1: Design, fabrication, inspection and tests ISO/TC 258 Project, programme and portfolio management ATÉ 28 DE FEVEREIO DE 2017 ISO/DIS 21503 - Project, programme and portfolio management -- Guidance on programme management ISO/TC 269 Railway applications ATÉ 05 DE MARÇO DE 2017
ISO/DIS 20138-1 - Railway Applications -- Calculation of braking performance (stopping, slowing and stationary braking) -- Part 1: General algorithms utilizing mean value calculation ISO/TC 270 Plastics and rubber machines ATÉ 03 DE ABRIL DE 2017 ISO/DIS 20430 - Plastics and rubber machines -- Injection moulding machines -- Safety requirements ISO/TC 292 Security and resilience ATÉ 21 DE MARÇO DE 2017 ISO/DIS 22300 (Ed 2) - Security and resilience -- Terminology