Sunray Wi-Fi Application Guide
The ATC application allows you to program the temperature set-points and time zones to configure the radiators. The main functions are: - Scheduling (weekly) - Programming the temperature set-points - Manual control - Monitoring of power usage The following is an information guide on how to use the application. To be used in conjunction with the radiator manual and the Sunray Wi-Fi Control Pack manual.
Sunray Wi-Fi App Controls Download the App from either; Google Play store: http://bit.ly/mkdaop Appstore: http://apple.co/ldy5fo Log in/create an account After logging in this is your home screen:
Devices: To add devices, go to the devices tab and select add. Here you will be prompted to select what method you want to add the devices with, selecting Fast on and Device Sync on apple, is a quickest and easiest way to add devices. Once selected, hold down the OK button on the radiator until you have them linked. For the Power meter use a paper clip to press the reset button to link them.
Once all the devices are added, the Devices tab gives you an overview of all your devices. Once you have the raditors added you will see the number of them added in the devices. By selecting the radiators and selecting See Radiators on and Active Radiators on devices, you can see each induidval radiator and its status. By pressing on one of the Radiadors you can name each radiator.
Thermostat: From this screen you can select which radiator you want to program. By clicking the Showroom, you can then select the radiators that you have connect to your account: After Selecting the radiator that you want to adjust go back to the home screen. When you press either the Auto 5 or the Manual 3 symbol the radiator displays the desired temperature along with the current temperature where the radiator is placed. 5 3 4 5 3 4
To adjust the desired temperature manually, without affecting your set program, you select the manual symbol 3. When manual is selected an arrow 4 appears at the bottom of the screen. By dragging this up you will have the manual control screen. By using the + and the you can change your desired temperature.
Once you have changed and set the desired temperature, press the down arrow. You will then be prompted to Save Changes. By clicking yes, you have changed the desired temperature and you will see the heating symbol showing that the heater has accepted your change and is starting to heat the room to that temperature.
Auto Programing: By picking Auto you can set a program for the heater to run automatically all week. The program is displayed by pressing the Up Arrow at the bottom of the screen. The screen displays the Days of the Week, the Time of Day 3 and the Temperature Settings. The days of the week are selected by pressing on each of the days, the selected day being the one in orange. You can then set the settings that you want for that day by pressing the square box that corresponds to the desired temperature setting at that time, as below 09:00 is set for Frost Protection (5 C), 0:00 is set for economy (6.0 C) and :00 is set for Comfort ( C). 3 3
To program multiple days with the same program at the same time simply select the days in which you want the same program to run. To save and send the program to your selected radiator simply press the down arrow and you will be prompted to save the program. Select yes and you will return to the home screen. As long as the heater is left on Auto the program will run. To program multiple heaters with the same program you can select multiple or all of the radiators to be updated to the same program, then input your times. When you exit and save the program it will be saved to all selected radiators. To change the temperature on the settings, comfort, economy and frost protection, simply select the setting and it gives you the option of what temperature you want to be run.
Monitoring: You can use the monitoring tab of the App to keep track of the temperatures and estimated kilowatt. You can have a breakdown of days, month and year. By selecting Icon you can see the usage that the Electricity Meter has recorded. If you select the radiator you can have a breakdown of each radiator or if you select all it will give you a read out of communitive consummation of the radiators 3 along with the record usage form your electricity meter 4. 3 3 4
If you select the radiator alone, you get a break down of the kw usage and the recorded temperature of the room from the Sunray radiator. This is only shown on the Version.
Power: The Power tab displays how much electricity is being used in your house. This gives you a live read out from the Electricity Meter which is installed in the switch board and supplied in with the gateway.
Weather: The weather tab gives you your current weather and a forecast for the next 4 days. For more information on ATC products, you will be directed to our website by pressing the ATC logo that appears on every tab.