Uniclass L48 EPIC D8 Orbis Classic Range CI/ SfB (.5) X
THE LAIDLAW SERVICE Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves. In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and AntiLigature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware. For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure. Specification Advice Laidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification. Product Development Orbis products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation. Project Management Having provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules. CPD seminars Laidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 800 compliance. Packaging and Delivery Laidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time. www.laidlaw.net
ORBIS CLASSIC CONTENTS THE LAIDLAW SERVICE ORBIS CLASSIC INTRODUCTION 5 LEVER FURNITURE, BACKPLATES & ESCUTCHEONS 6 0 PULL HANDLES PUSH PLATES, KICKING PLATES & FIXINGS 4 OVERHEAD DOOR CLOSERS 5 9 CONCEALED DOOR CLOSERS 20 FIRE DOOR CONTROLS 2 ELECTROMAGNETIC DOOR CLOSERS 22 FLOOR SPRINGS 2 24 HINGES 25 MORTICE CYLINDER LOCKCASES 26 28 CYLINDERS 29 SIGNS & SYMBOLS 0 2 DOOR STOPS & HOLDERS PULLS, HOOKS & WC FITTINGS 4 FLUSH & SLIDE BOLTS 5 PANIC EXIT HARDWARE 6 40 STANDARDS & BS EN CLASSIFICATIONS 4 42 DDA, APPROVED DOC. M & BS 800 4 45 INDEX 46 2 www.laidlaw.net
ORBIS CLASSIC INTRODUCTION Orbis Classic A comprehensive and fully coordinated range of architectural hardware defined by a simple and timeless aesthetic. This visual clarity is combined with high quality performance which lends itself to a wide range of applications from contemporary commercial offices to public buildings. Quality of design, manufacture, finish and performance are provided in equal measure in Orbis Classic, with most components available in Satin or Polished Stainless Steel or in a Silk Anodised Aluminium finish. www.laidlaw.net Front cover Orbis 54 80.9 lever mounted on 50 800..7 backplate in Satin Stainless Steel This page Orbis curved lever handle 54 8.22 on 50 800.6 rose used with 86R sashlock and Orbis Classic cylinder and turn
ORBIS CLASSIC INTRODUCTION Within the Orbis Classic range is a selection of lever and pull handle designs and an advanced system of door closers including many which will enable building owners to satisfy their obligations under the Disability Discrimination Act. a b Coordination of design and finish is achieved across a full range of products ensuring integrated Orbis Classic products can be specified for the full hardware requirement of most buildings. Orbis Classic door furniture can be completely integrated with Orbis Timber Doorsets Range. Factory preparation for the hardware ensures perfect installation to maximise the high performance and aesthetics of the Orbis Classic Range. Please refer to our Orbis Timber Doorsets brochure. c d Each component in the Orbis Classic range is designed for maximum performance. Products are tried and fully tested to the latest BS EN standards with full certification and CE marking where applicable. a. Orbis 9mm diameter pull handle used in conjunction with Orbis 2 85 deadlock b. Smoothline door closer 804 in Satin Stainless Steel finish c. Flush bolt 4 005.2 in Orbis Silk Anodised Aluminium finish, d. Bathroom lock with 78mm centres using Orbis 54 80.22 lever on concealed fixing backplate with large bathroom turn function 4 www.laidlaw.net
ORBIS CLASSIC INTRODUCTION BS EN Performance standards Many of the product types within the Orbis Classic range have been developed specifically to meet or exceed the latest European Standards. Where different grades of compliance are applicable, this will be indicated in the description against each item. More detailed information on standards and BS EN Classifications can be found on page 4 & 42. CE Marking Where CE marking is permitted, items are marked with the CE icon. The CE classification is indicated against each item where this is appropriate. Further information on CE marking and classifications can be found on page 4. Fire Testing Fire testing is an ongoing process with Laidlaw. Many of the Orbis Classic hardware items have been included on timber fire door tests up to 2 hours and on steel fire doors up to 4 hours. The icon indicates the item has been successfully included in fire tests and the brief details of these are included in the general descriptions. DDA, Approved Doc. M & BS 800 The principal of ensuring buildings are accessible to able and less able people alike is manifest in Approved Document M of the Building Regulations and with further guidance in BS 800 which contains specific dimensional information for certain items of architectural hardware. The disabled symbol is used throughout this document to identify those Orbis Classic items which conform to the requirements of Approved Document M and are therefore appropriate for use in DDA applications. Further information can be found on pages 4 to 45. Materials & Orbis Classic products are manufactured using only the highest grade materials including Grade 6 stainless steel. The range is available in Satin Stainless Steel, Polished Stainless Steel and Silk Anodised Aluminium. Above 5 8.0BB pull handles in Satin Stainless Steel 5 www.laidlaw.net Ordering Products When ordering products from the catalogue remember to specify the finish code after the product code e.g 5 8.0BB In certain cases, an applied finish is used. These are carefully selected to match the main hardware finishes. Dimensions All dimensions shown throughout this brochure are in mm. The products listed within this publication are subject to a 5 year guarantee against defects proved to be the result of faulty manufacture or defective materials unless otherwise stated. Extended guarantees can be obtained for specific projects on application via your Laidlaw Technical Consultant and subject to an agreed maintenance programme. Satin Stainless Steel Polished Stainless Steel Silk Anodised Aluminium
ORBIS CLASSIC LEVER FURNITURE The essence of the Orbis Classic range is a series of timeless round bar and eliptical section lever handles which are supplied independant of the rose or plate mounting. This modular approach provides flexibility and allows levers to be changed or replaced without having to remove the rose or plate mounting. Products can be ordered separately and put together on site. Orbis Classic lever handle assemblies have the following features on both rose and plate mountings washer for extra durability as standard to order fixings for back to back assembly and optional face fixing screws conceals fixings compatible with all major lockcase ranges supplied as standard for secure grub screw fixing page 0) 6 www.laidlaw.net
ORBIS CLASSIC LEVER FURNITURE Lever Handle Straight plate mountings (see pages 90) 6 stainless steel BS EN 906 grade 4 (highest grade) Please note, all levers are supplied with "break through" type spindle for secure grub screw fixing. 60 4 9Ø Item no. 54 800.9 54 800.22 Diameter (mm) 9 22 Specification advice Remember to specify roses or backplates for use with lever handles (see pages 90) pair pair Lever Handle Return to door lever handle plate mountings (see pages 90) 6 stainless steel BS EN 906 grade 4 (highest grade) used with 5mm thick roses or plates 60 4 9Ø Item no. 54 80.9 54 80.22 Diameter (mm) 9 9 pair pair Specification advice For escape sashlock applications we recommend the use of a lever fixed to the rose. To fully suite by finish please refer to our Orbis Commercial Range brochure for details. Fixed Rose Lever Option As an alternative to the loose rose option, Orbis Classic Range also offers a fixed rose variant of the 9mm diameter 'return to door' lever mounted on a 5mm concealed fix rose. For complementary items to suite with this lever option please refer to our Centurion brochure. 60 52Ø 5 4 9Ø Diameter Item no. (mm) 54 60.9 9 pair 7 www.laidlaw.net
ORBIS CLASSIC LEVER FURNITURE Lever Handle Curved handle plate mountings (see pages 90) 6 stainless steel BS EN 906 grade 4 (highest grade) 66 22Ø 22Ø Diameter Item no. (mm) 54 8.22 22 x 5 Specification advice Remember to specify roses or backplates for use with the lever (see pages 9 0) pair Please note, all levers are supplied with "break through" type spindle for secure grub screw fixing. 5 Lever Handle Elliptical section plate mountings (see pages 90) BS EN 906 grade 4 (highest grade) Diameter Item no. (mm) 54 82.22 22 x 2 Specification advice Remember to specify roses or backplates for use with the lever (see pages 9 0) pair 52 22 8 Lever Handle Scroll handle plate mountings (see pages 90) 6 stainless steel BS EN 906 grade 4 (highest grade) used with 5mm thick roses or plates 65 6 22Ø Diameter Item no. (mm) 54 84.22 22 pair Specification advice Remember to specify roses or backplates for use with the lever (see pages 9 0) 54 8.22 lever mounted on 50 800.6 concealed fix rose in finish 8 www.laidlaw.net
ORBIS CLASSIC LEVER FURNITURE, ROSES & ESCUTCHEONS Lever Rose Concealed fixing use with all Orbis Classic levers for extra durability as standard available to order (see table opposite) fixings for back to back assembly and optional face fixing screws compatible with all major lockcase ranges & finishes are Grade 6 stainless steel BS800 when used as a package with designated levers 52 5 8ccs Size Item no. (mm) 50 800.6 52 x 5 pair Item no. Description 50 800CW Nylon Nylon bearing washer pack pair 50 800CW PB pair Specification advice Check lockcase springing is suitable for unsprung lever and rose furniture. Individual roses for half sets of levers are available to special order. For escape sashlock applications we recommend the use of a lever prefixed to the rose. Please refer to our Orbis Commercial brochure for details. Escutcheons Concealed fixing with all Orbis Classic rose mounted lever handles or with pull handles spindle and 8mm adapter suitable for door thicknesses from 5 to 54mm screws for face fixing 5 800.0 5 800. 5 800.2 5 800. 52 5 Item no. Function 5 800.0 blank 5 800. 5 800.2 5 800. 5 800.4 5 800.5 5 800.5 lever key oval profile euro profile indicator/release standard turn large turn 5 800.25 extended turn 5 800.4 5 800.5 5 800.5 5 800.25 Specification advice Extended bathroom turn 5 800.25 is recommended for special needs applications. 52 60.5 6 6 0 5 4 26 9 www.laidlaw.net
ORBIS CLASSIC LEVER FURNITURE BACKPLATES Backplates Concealed fixing Classic and a range of Orbis Premier lever handle designs when used with Orbis Classic lever handles options supplied with 5mm spindle and 8mm adapter suitable for door thicknesses from 5 to 54mm screws for face fixing and with M4 bolt through fixings 50 800.5.7 50 800.4.7 50 800.5.7 50 800.0 50 800..7 72mm centre lockcases Item no. Function 50 800.0 blank 50 800..7 50 800.4.7 50 800.5.7 50 800.5.7 euro profile indicator/release standard turn large turn 57mm centre lockcases Item no. Function 50 800.0 blank 50 800. euro profile 50 800.4 indicator/release 50 800.5 standard turn 50 800.5 large turn pair pair pair pair DDA Applications Backplates and escutcheons meet the requirements of BS800 when used as a package with designated levers 54 80.9 lever mounted on 50 800..7 backplate in finish Specification advice Make sure you select the correct backplate to suit the centres of the lock being used. To select a bathroom lock set, be sure to specify a turn and an indicator plate. 52 80 57 / 72 57 / 78 Fixing Packs As standard all levers are supplied with FPL. 'Break Through' spindle and FPL. back to back fixings for doors 8mm to 54mm thick and face fixing screws. Alternative fixing packs are available for thicker doors, for sided applications or for use with locks which have a split follower function. Back to back fixing bolts Face fixing screws 05 (FPL.) 20 (FPL.2) 8 5 cut on site 8 FPL FPL2 Item no. FPL. FPL.2 FPL2. FPL2.2 Description 'Break Through' spindle Back to back fixings bolts and face fixing woodscrews 'Break Through' spindle Back to back fixings bolts and face fixing screws Swivel half spindle for sided lever operation and face fixing woodscrews Swivel half spindle for sided lever operation and face fixing woodscrews Door Thickness 8 54mm 55 65mm 8 54mm 55 65mm 05 (FPL.) 20 (FPL.2) 0 8 FPL FPL. FPL.2 Split spindle Back to back fixings bolts and face fixing woodscrews Split spindle Back to back fixings bolts and face fixing woodscrews 8 54mm 55 65mm FPL5.2 FPL5.2 Adapter to convert 5mm bathroom spindle to suit 8mm follower n/a 0 www.laidlaw.net
ORBIS CLASSIC PULL HANDLES Pull Handles Curved Section Designed to be compatible with 54 8.22 lever handle design 5 8.0 Bolt through fixing Item no. Centres (mm) 5 8.0 00 fixing options doors up to 55mm thick other thicknesses to special order available (see page 4) Back to back fixing Item no. Centres (mm) 5 8.0BB 00 pair Please note, these pull handles are also interchangeable with the pull handles and backplate system in the Orbis Premier range. For further details refer to the Orbis Premier Range brochure. 22Ø 42 Specification advice Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see page 5) 00 Pull Handles Elliptical Section Designed to be compatible with 54 82 lever handle design fixing options doors up to 55mm thick other thicknesses to special order available (see page 4) 5 82. 5 82.2 5 82.28 Bolt through fixing Item no. Centres (mm) 5 82. 5 5 82.2 22 Back to back fixing Item no. Centres (mm) 5 82.BB 5 5 82.2BB 22 5 82.28 286 pair pair 5 82.28BB 286 pair 45 Specification advice Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see page 4) centres www.laidlaw.net
ORBIS CLASSIC PULL HANDLES Pull Handles Round Bar Section Designed to be compatible with all round bar lever handle designs fixing options doors up to 55mm thick other thicknesses to special order available (see page 4) Please note, these pull handles are also interchangeable with the pull handles and backplate system in the Orbis Premier range. For further details refer to the Orbis Premier Range brochure. 9Ø 5 89.24 45 5 89.0 5 89.45 5 89.60 Bolt through fixing Item no. Diameter (mm) Centres (mm) 5 89.5 9 50 5 89.8 9 80 5 89.24 9 240 5 89.0 9 00 5 89.45 9 450 5 89.60 9 600 Back to back fixing Diameter Centres Item no. (mm) (mm) 5 89.5 BB 9 50 pair 5 89.8 BB 9 80 pair 5 89.24 BB 9 240 pair 5 89.0 BB 9 00 pair 5 89.45 BB 9 450 pair 5 89.60 BB 9 600 pair 5 822.24 centres 5 822.0 5 822.45 5 822.45 Bolt through fixing Diameter Centres Item no. (mm) (mm) 5 822.8 22 80 5 822.24 22 240 5 822.0 22 00 5 822.45 22 450 5 822.60 22 600 A concealed fixing rose is available for surface mounting pull handles. Designed to be used with 9mm and 22mm round bar pull handles. The 52mm x 5mm rose mounting converts the pull handle to a concealed 'face fixed' pull. 22Ø 45 Back to back fixing Diameter Centres Item no. (mm) (mm) 5 822.8 BB 22 80 pair 5 822.24 BB 22 240 pair 5 822.0 BB 22 00 pair 5 822.45 BB 22 450 pair 5 822.60 BB 22 600 pair 50 85.9.6 For 9mm pull handles 50 85.22.6 For 22mm pull handles centres Specification advice For compliance with DocM, we recommend the use of pull handles with 450mm centres or longer. Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see page 4) 2 www.laidlaw.net
ORBIS CLASSIC PULL HANDLES Pull Handles Cranked A series of cranked round bar pull handles for bolt through fixing or fixing back to back suit timber doors diameters an appropriate push plate for the other side of the door (see page 5 for further details) are available (see below) centres A 45 Bolt Through Item no. Ø A Centres SS/PS SA 5 29.0 9 90 00 5 29.45 9 90 450 5 29.60 9 90 600 5 222.0 22 25 00 5 222.45 22 25 450 5 222.60 22 25 600 Back to Back Item no. Ø A Centres SS/PS SA 5 29.0BB 9 90 00 pair 5 29.45BB 9 90 450 pair 5 29.60BB 9 90 600 pair 5 222.0BB 22 25 00 pair 5 222.45BB 22 25 450 pair 5 222.60BB 22 25 600 pair Entrance Pull Handles A series of pillar fixed round bar pull handles for bolt through fixing or back to back Bolt Through 2mm Ø Item no. A C SS/PS SA 5 2.500 500 50 5 2.800 800 650 suit timber doors diameters are available (see below) 45 Bolt Through 25mm Ø Item no. A C SS/PS SA 5 25.000 000 850 Back to Back 2mm Ø Special Lengths Special length pull handles can be supplied. Please contact your Laidlaw Technical consultant for further details. A C Item no. A C SS/PS SA 5 2.500BB 500 50 pair 5 2.800BB 800 650 pair Back to Back 25mm Ø Item no. A C SS/PS SA 5 25.000BB 000 850 pair Bolt Through Fixing Packs Item no. LA58.9 LA58.22 Description M6 bolt pack for 9mm pulls (SS & PS only) M8 bolt pack for all 22mm, 25mm & 2mm diameter pulls & 9mm pulls in SA finish www.laidlaw.net
ORBIS CLASSIC PUSH PLATES, KICKING PLATES & FIXINGS Push Plates Designed to be used on the push side of the door with a bolt through or concealed rose fixed pull handle on the pull side. Push plate is used to conceal the bolt through pull handle fixing. 600mm centres Item no. corners Size (mm) 52 80 radius 50 x 00 52 802 square 50 x 00 52 80 radius 500 x 00 52 804 square 500 x 00 52 805 radius 650 x 00 52 806 square 650 x 00 Kicking & Mid Rail Plates Kicking & mid rail plates must be ordered to suit the height and width required. Special designs are also available to order. Plates are supplied with selftapping wood screws. Pull Handle Fixings Bolt through Orbis Classic 5 800 Series handles in all finishes are supplied as standard with fixings FPP.5 and back to back handles are supplied with fixing pack FPP5.2. FPP Pin side Secret face fixing for timber doors with threaded plugs and M8 fixing bolts. Use with Pin side pull handles only FPP5 Pin side Back to back fixing for timber doors with M8 bolt. Use one Thread side & one Pin side pull handle. FPP5.2 FPP5. 40 55mm doors 5mm doors FPP2. Concealed rose face fixing (roses not included with fixing pack) FPP6. Back to back fixing for glass doors with M8 bolt, mmø nylon bush and washers. Use one Thread side & one Pin side pull handle. Thread side Pin side Suitable for glass 0 4mm thick Clearance hole in glass 4mmØ FPP Thread side Bolt through fixing for timber doors with CSK M8 bolts. FPP.2 FPP. FPP.5 40 55mm doors 5mm doors 55 65mm doors FPP7. Thread side Bolt through fixing for glass doors with M8 'Pig nosed' bolt. Use with Thread side pull handles only Suitable for glass 0 4mm thick Clearance hole in glass 4mmØ 4 www.laidlaw.net
ORBIS CLASSIC OVERHEAD DOOR CLOSERS Door Closers Smoothline Orbis Classic Smoothline closers have been developed to provide high performance and a distinctive form, compatible with the Orbis Classic furniture power units available and latch action backcheck facility available suitable for universal mounting (fig., fig.66 or fig.6 applications) suitable for mounting on pull or push side of the door or transom mounted (not illustrated) and suitable for use on fire doors up to 2hr rating 80 806 Electromagnetic HoldOpen Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the track mounted holdopen facility is released and the door closes in the normal manner and BS EN 55 and latch action on pull or push side of the door or transom mounted and suitable for use on fire doors up to 2hr rating Electrical requirements Operating voltage 24v AC/DC (+0% 5%) at 90mA max. 27 865 Opening and closing forces In order to show compliance with requirements for accessibility, the force needed to open the door, measured at the leading edge, from 0 must be less than 0N (see page 4 for further information). the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations. For guidance purposes we have indicated in the chart opposite those closers which can in principle meet the opening force criteria for accessibility and also the closing force criteria for fire doors. Due to the principles of leverage, the door width is critical in assessing the relevant opening/closing forces. The chart indicates the minimum door leaf width that is possible to achieve the necessary opening force. The maximum leaf width may be governed by the maximum closer power in accordance with BS EN 54. Materials and construction The Orbis Classic Smoothline fixed power units have die and steel arms & brackets. 806 Smoothline adjustable mechanisms are cast iron. Smoothline closers have electrophoretic finishes with arms and brackets to match. ESS Electrophoretic Satin Stainless (to match ) EPS Electrophoretic Polished Stainless (to match ) ESA Electrophoretic Silk Anodised Aluminium (to match ) In addition, a range of colour coated and sprayed metallic finishes complete with matching arms and brackets are available to special order. 5 www.laidlaw.net
ORBIS CLASSIC OVERHEAD DOOR CLOSERS 294 69 69 Specification advice Fixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an underpowered or overpowered unit. Door width (mm) Door weight (kg) 750mm 850mm 950mm 00mm 250mm 400mm 7 576 76 74 BS EN 54 Power size 20kg 2 40kg 60kg 4 80kg 5 00kg 6 20kg 76 7 74 Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig. applications) only. page 22). max. projection 0 min. projection 44 min. 4 HoldOpen closers The use of mechanical holdopen closers is NOT PERMITTED on fire door applications. min. 70 min. 57 min. 48 max. projection 70 min. 80 min. 27 min. projection 2 BS EN Classifications Orbis Commercial Smoothline closers have been fully tested to the requirements of BS EN 54 (and BS EN 55 where applicable) and have been designated with the Classification no. as shown below. Digit applies to 4 8 4 8 26 Features & Functions Item no. 80V 8V 806 86 826 86 27 865 4 4 2 6 2 5 2 5 2 6 4 Fixed power or spring power adjustable spring spring spring spring spring spring spring BS EN 54 compliant BS EN 55 compliant n/a n/a n/a n/a n/a n/a CE Marked Min. door width (mm) 875 875 850 850 850 Max. door width (mm) 00 00 400 250 400 00 Grade of opening angle (see note #) 4 4 4 4 4 4 Adjustable closing speed Adjustable latch action Adjustable back check Adjustable delayed closing action Electromagnetic holdopen track Hold open armset (non fire doors only) Fire tested to EN 64 2 hr * * no min. door size limits for electromagnetic hold open closer # Grade 4 will close a door from 80 opening angle Grade will close a door from 05 opening angle 6 www.laidlaw.net
ORBIS CLASSIC OVERHEAD DOOR CLOSERS Door Closers Softline Orbis Commercial Softline closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Commercial round bar lever furniture 807.0 where stated and latch action available suitable for fig. and fig.66 applications and suitable for use on timber fire doors up to 2 hr rating, reduction in fig. or 66 applications 800 808 Opening and closing forces In order to show compliance with requirements for accessibility, the force needed to open the door, measured at the leading edge, from 0 must be less than 0N (see page 4 for further information). the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations. Materials and construction The Orbis Commercial Softline closers have cast aluminium bodies with steel covers, arms and brackets. Softline closers have electrophoretic finishes with arms and brackets/track to match. ESS Electrophoretic Satin Stainless (to match ) EPS Electrophoretic Polished Stainless (to match ) ESA Electrophoretic Silk Anodised Aluminium (to match ) Electromagnetic Controls Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the integral holdopen mechanism is released and the door closes in the normal manner and BS EN 55 where stated and latch action track arm configurations and suitable for use on fire doors up to 2hr rating Electrical requirements Operating voltage 24v DC (+0% 5%) at 2W max. with the exception of 27 894.0 (.4W max.) 7 www.laidlaw.net 27 894.0 Operating Modes Fixed strength models are site selectable for either 'holdopen' or 'swingfree' operation. Hold open angle is available from 75 up to 05. The 'swingfree' facility allows the door to operate as if no closer were fitted. When the power to the closer is cut, or in the event of alarm activation, the closer is reactivated and closes the door. Materials and construction The Softline electromagnetic closers have extruded aluminium bodies with covers, arms and brackets in steel. 27 854 DDA applications Both operating modes of the electromagnetic door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements.
ORBIS CLASSIC OVERHEAD DOOR CLOSERS 25 8 78 50 800 807 80 87 808 88 Specification advice Fixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an underpowered or overpowered unit. Door width (mm) Door weight (kg) 750mm 850mm 950mm 00mm 250mm 400mm 49 25 max. projection 25 02 55 78 0 50 60 20 807.0 BS EN 54 Power size 20kg 2 40kg 60kg 4 80kg 5 00kg 6 20kg Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig. applications) only. 94mm 800; 807 2mm 808 HoldOpen closers The use of mechanical holdopen closers is NOT PERMITTED on fire door applications. 65 fig. 94mm 800; 807 2mm 808 0mm 800; 807 6mm 808 fig. 66 5 BS EN Classifications Orbis Classic Softline closers have been fully tested to the requirements of BS EN 54 and have been designated with the Classification no. as shown above. closer specified. fig. 6 78 fig. 0 slide track 8 24 Insert power size into Classification number Mechanical Controls Electromagnetic Controls Features & Functions Item no. 800 80 807 87 807.0 808 88 27 85 27 854 27 855 27 89.0 27 894.0 2 4 2 4 2 5 2 5 4 5 4 Fixed power or spring power adjustable fixed** fixed** spring spring n/a spring spring fixed fixed fixed fixed spring Addition of template adjustable option** n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a BS EN 54 compliant & CE Marked BS EN 55 compliant & CE Marked Projecting arm (P) or Track arm (T) P P P P T P P P P P T T Electromagnetic holdopen Electromagnetic swingfree Grade of opening angle (see note #) 4 4 4 Adjustable closing speed Adjustable latch action Adjustable back check Hold open armset Fire tested to EN 64 2 hr ** by altering the mounting position of the closer, the closing strength can be adjusted # Grade 4 will close a door from 80 opening angle. Grade will close a door from 05 opening angle 8 www.laidlaw.net
ORBIS CLASSIC OVERHEAD DOOR CLOSERS Door Closers Orbis Classic 700 Series is a comprehensive range of trimplate and covered options and latch action available variants and suitable for use on timber fire doors up to 2 hr rating, 76 700 Note: The use of mechanical holdopen closers is NOT PERMITTED on fire door applications. 70V 70.0 Features & Functions Item no. Power adjustment type or fixed power Trimplate or Allover cover BS EN 54 compliant Projecting arm (P) or Slide Track (T) Grade of opening angle (see note #) Adjustable closing speed Adjustable latch action Adjustable back check Adjustable delayed closing action Holdopen armset Fire tested to EN 64 2 hr timber door CE Marked Certifire Approved 70V 7V 706 76 726 76 70.0 700 70 70 7 702 72 70.0 4 4 2 6 2 5 2 5 2 6 2 4* 2 4* 2 4 2 4 2 5 2 5 spring spring spring spring spring spring fixed position position spring spring spring spring fixed Cover Cover Cover Cover Cover Cover Cover Trim. Trim. Trim. Trim. Trim. Trim. Trim. P P P P P P T P P P P P P T 4 4 4 4 4 * # Grade 4 will close a door from 80 opening angle. Grade will close a door from 05 opening angle 70V 76 59 ( 70 & 7) 66 (all others) 48 ( 70 & 7) 55 (all others) 249 ( 70 & 7) 0 (all others) 70V closer is a high efficiency closer capable of meeting the closing force requirements of EN54 for door applications and the maximum opening force requirements for DDA applications (See also note on page 5) Power sizes stated in the chart relate to closers mounted on the pull side of the door (fig. applications) only. 700 72 62 ( 702 & 72) 6 (all others) BS EN Classifications Orbis Classic 700 Series closers have been fully tested to the requirements of BS EN 54 and have been designated with the Classification no. as shown the closer specified. 4 8 24 9 www.laidlaw.net 5 ( 702 & 72) 42 (all others) 28 ( 702 & 72) 22 (all others) Insert power size into Classification number
ORBIS CLASSIC CONCEALED DOOR CLOSERS Door Closers Concealed A series of concealed and semi concealed overhead door closers for mounting in the top edge of the door. Suitable for all types of action internal doors with a minimum thickness of 44mm concealed versions standard A56.4 Grade having undergone 2 million test cycles and latch action available for use on fire doors up to hr fire rating (see chart below) 0 Features & Functions Item no... 0 0. ANSI A56.4 compliant CE marked (when used on 54mm thick door) Grade of opening angle (see note #) 4 4 Adjustable closing speed Adjustable latch action Adjustable back check Slide track mounted in head frame Visible parallel arm and soffit bracket Visible regular projecting arm Hold open armset Suitable for pull side of the door Suitable for push side of the door Fire rating (using intumescent pack) hr Power sizes All Orbis Classic concealed closers are fixed power opposite. Closers suitable for doors up to 200mm wide are available to special order. Please contact your Laidlaw Technical Consultant for further information. Specification advice Concealed closers are handed and must be specified to suit left or right hand doors. # Grade 4 will close a door from 80 opening angle. Grade will close a door from 05 opening angle Clockwise closing Left hand ISO. 5.0 Anticlockwise closing Right hand ISO. 6.0 20 www.laidlaw.net
ORBIS CLASSIC FIRE DOOR CONTROLS Electromagnetic Door Holders Wall and floor mounted electromagnetic door holders are used in conjunction with either an overhead door closer or floor spring. When connected to the building fire/smoke detection and alarm system they will allow a fire door in a high traffic location, such as a corridor, to be held open during normal use. In an emergency situation the holder is deactivated and the door closes under the action of the door closer. The door can always be pulled manually off hold open to allow the door to close. mounting alarm conditions 27 5. 27 5 27 5 FMB 86 25 Finish SS Item no. Description PCP SE 27 5 wall mounted semi recessed 27 5. surface mounting case for use with 27 5 27 5FMB floor mounting bracket Specification advice The holdopen device should be sited at the same level as the closing device (or as close as practical) to minimise the stress placed on the door whilst it is being held open. A skirting mounted holdopen unit used in conjunction with an overhead door closer could induce the door to twist, causing the door to fail to close fully. Power for the electromagnet must not be drawn from the fire alarm system except in alarm condition. A separate power supply is designed specifically for the electromagnetic units (see below). BS EN Classifications Orbis electromagnetic holdopen units have been fully tested to the requirements of BS EN 55 and have been designated with the Classification no. as shown below. 5 6 Electrical requirements Operating voltage 24vDC (22v min / 0v max.) 50mA nominal A series of transformer/rectifiers with facilities for plug in relays are available to power or multiple units. Transformer/rectifier Item no. For holdopen units Max. no of units 27 4 27 5 & 27 54 4 27 20 27 5 & 27 54 20 27 50 27 5 & 27 54 50 Orbis electromagnetic holdopen units are available in applied finishes. SS and PCP are electro plated to match and. The SE finish is a sprayed silver finish to suite with products. 2 www.laidlaw.net
ORBIS CLASSIC ELECTROMAGNETIC DOOR CLOSERS Door Closers Electromagnetic Dual function electromagnetic door with site selectable 'holdopen' or 'swingfree' operation. The units incorporate an electromagnet which is controlled by the building fire/smoke detection and alarm system. In general operation, the door can be allowed to swing free of the door closer or be held in the open position, typically in a high traffic location. On activation of the fire/smoke detection system the electromagnet will be deactivated and the door will close under normal closer power 27 6 DDA applications Both operating modes of the electromagnetic door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements. Power sizes mounting in fig. application. Door width (mm) Door weight (kg) 950mm 00mm 250mm 400mm and BS EN 55 and latch action selectable on installation fig., fig.6 or fig.66 applications BS EN 55 Power size 4 5 6 60kg 80kg 00kg 20kg Features & Functions Item no. 27 6 27 64 27 65 27 66 27 664 27 665 27 765 4 5 4 5 Mounting options fig. & 6 fig. & 6 fig. & 6 fig.66 fig.66 fig.66 Grade of opening angle (see note #) Adjustable closing speed Adjustable latch action Adjustable backcheck Electromagnetic swingfree Electromagnetic holdopen Holdopen angle adjustment Fire tested EN64 on timber door 2hr 85 95 (fig.) 0 0 (fig.) 85 95 (fig.6) 65 85 (fig.66) 90 05 (fig.66) 4 fig. & 6 8 4 BS EN Classifications Orbis electromagnetic closers have been fully tested to the requirements of BS EN 54 and BS EN 55 and have been designated with the Classification no. depends on the closer specified. Electrical requirements Operating voltage 24vDC (22v min / 0v max.) 90mA nominal A series of transformer/rectifiers with facilities for plug in relays are available to power or multiple units. # Grade will close a door from 05 opening angle Transformer/rectifier 8 87 64 05 57 64 92 20/0* * max. projection for swing free applications is 20mm. max. projection for holdopen applications is 0mm 5 58 min. top rail depth Item no. closers suitable max. no of units 27 4 (all) 27 6 27 665 27 20 (all) 27 6 27 665 5 27 50 (all) 27 6 27 665 8 Available in a wide range of coloured and metallic finishes. SS Satin Stainless PS Polished Stainless PB Polished Brass ESA Electro Satin Aluminium SA Satin Aluminium PA Polished Aluminium SE Sprayed Silver GE Sprayed Gold BE Sprayed Brown Plus the full range of coloured finishes shown on page 9. 98 min 70 min. opening 22 www.laidlaw.net
ORBIS CLASSIC FLOOR SPRINGS Floor Springs A series of floor springs is available offering a high level of sophisticated door control specifically for high traffic locations. The range includes a wide selection of accessories to suit timber, metal and glass doors. for doors up to 00kg and BS EN 55 where stated and latch action Clockwise closing Left hand ISO. 5.0 Anticlockwise closing Right hand ISO. 6.0 Electromagnetic Option Electromagnetic holdopen and freeswing versions are available. When connected to the building fire alarm/detection system, the door can be allowed to swing free or be held open in high traffic locations. On activation of the fire/smoke detection system the electromagnet will be deactivated and the door will close under normal spring power. The hold open position is adjustable between 75 and 80. Electromagnetic versions conform to EN 55. Complete with plug connector for 24V supply. Electrical requirements Operating voltage 24vDC + 5%, residual ripple max. 0% Power input 2.W Features & Functions Item no. Fixed power or spring power adjustable BS EN 54 compliant & CE Marked BS EN 55 compliant & CE Marked Certifire Approved for fire doors Grade of opening angle (see note #) Adjustable closing speed Adjustable latch action (5 0 ) Adjustable back check Adjustable delayed closing action Mechanical holdopen Electromagnetic holdopen Electromagnetic swingfree 0 86/DA 0 864/DA 0 866/DA / 4 / 6 fixed 4 0 864/F 0 865/F 0 866/F 4 / 5 / 6 fixed 4 0 764 0 764/DA 0 764/HO 4 spring 4 0 764/DA 0 764/HO 0 864/HO 0 865/HO 0 866/HO 0 864/FS 0 865/FS 0 866/FS Max. leaf weight (kg) 00 00 20 00 00 4 / 5 / 6 fixed 4 4 / 5 / 6 fixed 4 # Grade 4 will close a door from 80 opening angle Power size * With the exception of the 0 764 model, the Orbis Classic floorsprings are fixed power units and must be ordered to suit each For example, a 0 86/DA 0 864/DA 0 866/DA 2 www.laidlaw.net
ORBIS CLASSIC FLOOR SPRINGS A Door width (mm) Door weight (kg) 750mm 850mm 950mm 00mm 250mm 400mm B E C Dimensions (mm) 0 764 all others A 50 60 B 82 78 C 285 4 D 08 58 E 05 05 BS EN 54 Power size 20kg 2 40kg 60kg 4 80kg 5 00kg 6 20kg D Power sizes Orbis floorsprings are fixed power (except 0 764 which is adjustable power). Please contact your Laidlaw Technical Consultant for further information. Accessories for action doors 56 Accessories for double action doors 29 0 5 min. 29 0 56 5 20 29 02 24 29 00 25 Accessories A wide range of accessories is available for use with the Orbis Classic range of floorsprings. The selection of appropriate accessories relates to the type of door and the use of action or double action doors. For glass door fittings and additional accessories for metal, glass or timber doors please contact your Laidlaw Technical Consultant for further advice. Accessories for action doors Item no. Description Finish 29 02 Door strap for bottom of door suitable for flush doors Zinc plated 29 0 Top centre with eccentric pin. Suitable for flush doors non handed Zinc plated 29 06/L Cover cap for door strap Left Hand Mill Finish 29 06/R Cover cap for door strap Right Hand Mill Finish 29 07 Double cover caps for top centres Mill Finish Accessories for double action doors Item no. Description Finish 29 00 Door strap for bottom of door Zinc plated 29 0 Adjustable top centre c/w frame and door portion Steel 24 www.laidlaw.net
ORBIS CLASSIC HINGES Ball Bearing Hinges suitable for doors up to 20kg (Weight based on hinges per door leaf) versions Grade 04 woodscrews request for metal doors/frames 7 80. 7 800. Radiused corner hinges Item no. Size (mm) 7 800. 02 x 76mm 7 80. 7 80. 02 x 02mm 02 x 76mm with stud Square corner hinges Item no. Size (mm) 7 800.2 02 x 76mm 7 80.2 2 80.2 02 x 02mm 02 x 76mm with stud 7 80.2 7 800.2 0mmR 4 0mmR 0 02 02 02 02 2.5 2.5 Specification advice Ball bearing hinges are suitable for all types of internal and external applications. When used on fire doors, intumescent packs need to be specified IP H to suit 76 x 02mm hinges IP H2 to suit 02 x 02mm hinges Note: Each hinge pack contains intumescent material for a pair and a half of hinges. For 0 min. fire door applications specify intumescent pack per pair and a half of hinges. For 60 min. fire door applications specify 2 intumescent packs per pair and a half of hinges. Rising Butt Hinges light internal doors, providing a soft 'self closing' action Closing (CW) or AntiClockwise Closing (ACW) Grade 04 woodscrews weight 60kg 7 879.5 7 879.6 29 Rising butt hinges Item no. Handing 7 879.5 CW closing 7 879.6 ACW closing Clockwise closing Left hand ISO. 5.0 Anticlockwise closing Right hand ISO. 6.0 SSS 02 SSS Satin Stainless Steel 25 www.laidlaw.net
ORBIS CLASSIC MORTICE CYLINDER LOCKCASES Euro Profile Mortice Lockcases Radiused forend An integrated series of modular euro profile cylinder mortice lockcases designed to meet the requirements of BS EN 2209 case with 6 function variants interchangeability of lock models BS EN2209 and with the dimensional characteristics of DIN825 55mm) & 72/78mm centres retains the lever spindle for a firm positive assembly cylinder positions opening the lockcase lever furniture latchbolt stainless steel with matching strike plate recommendations making it suitable for DDA applications forend locks only, see below 0 86 86R 862R Item no. Function 86R latch only 86R 2 86R 862R 0 86R 862R Square ended forend sashlock deadlock bathroom lock nightlatch escape sashlock Item no. Function 86 latch only 86 2 86 862 0 86 862 sashlock deadlock bathroom lock nightlatch escape sashlock Specification advice Escape sashlocks 862 & 862R have split followers and require the use of lever handles with split spindles. Please specify suitable spindle (see page 0) When used on fire doors, intumescent packs need to be specified IP L For all Orbis Commercial European style lockcases except 862 & 862R IP L2 For 862 & 862R Orbis Commercial European style lockcases For 0 min fire door applications specify pack per lockcase. For 60 min fire door applications specify 2 packs per lockcase. 86R sashlock 9 2 29 9 2 2 2 72 45 5 2 2,5 46 72 6 65 8 25 95 57 72 45 5 2 2,5 46 78 6 65 4 8 25 8 8 60 60 4 8 Rebate Sets for Cylinder Locks Rebate Kits Used to convert the meeting stiles of rebated double doors so that the standard mortice lock can be used. 6 stainless steel only Lock ref: mm rebate 86 08 865 86 08 86 2 86 08 867 862 08 86 0 86 08 86 862 08 86 25mm rebate 08 864 08 862 08 866 08 862 08 860 08 862 26 www.laidlaw.net
ORBIS CLASSIC MORTICE CYLINDER LOCKCASES Dual Profile Mortice Lockcases Radiused forend An integrated series of modular cylinder mortice lockcases which are suitable for use with oval or euro profile cylinders requirements of BS EN 2209 interchangeability of lock models cylinder positions at 8mm centres (excluding nightlatch) resistant rotating steel pins opening the lockcase lever furniture tension allows fine tuning of the lock springing to suit heavier or drooping levers stainless steel with matching strike plate forend styles centres oval profile or 57mm centres euro profile cylinders holdback functions forend locks only 2 85 85 85 Item no. Function 85R latch only 85R 2 85R 852R 0 85R Square ended forend sashlock deadlock bathroom lock nightlatch Item no. Function 85 latch only 85 2 85 852 0 85 sashlock deadlock bathroom lock nightlatch Specification advice Please note that a conversion plate is fitted to the lockcase suitable for euro profile cylinders. The plate must be removed for use with oval profile cylinders. Rebate Kits Lock ref: mm rebate 25mm rebate 85 08 855 08 854 85 08 85 08 852 2 85 08 857 08 856 852 08 85 08 852 0 85 08 85 08 850 25 25 8 8 6 6 8 56/57 24 08 65 46 57 24 08 57 57 76 76 2 85 deadlock 27 www.laidlaw.net
ORBIS CLASSIC MORTICE CYLINDER LOCKCASES Dual Profile Mortice Lockcases 25 5 702 A series of Euro profile and oval profile mortice cylinder lockcases, lever lockcases and latches. 702. requirements of BS EN 2209 range of functions at 8mm centres (excluding nightlatch) brass latchbolt opening the lockcase lever furniture available in Satin Stainless steel or Satin Chrome finish with matching strike plate forend styles profile cylinders and radiused forend locks Full Case locks 2 75. 706.2 70 72 70 2 72. Horizontal locks Item no. Function / Description 702. Euro profile cylinder sashlock 702.2 702 Lock ref: Oval profile cylinder sashlock lever sashlock 2 72; 2 7; 2 75* 70; 706*; 702; 74 2 78; 2 7; 72 702 52 Rebate Kits 4 57 mm rebate 07 0. 07 2. 07 4. Forend Square Square Square 2 72R; 2 7R; 2 75R* 07 0.R 07 0.25R 70R; 706R*; 702R; 74R 07 2.R 07 2.25R 2 78R; 2 7R; 72R 07 4.R 07 4.25R 702R 07 6.R 07 6.25R 70 07 6. 88 For radiused forend locks use Suffix R e.g 702.2R 4 25mm rebate 07 0.25 07 2.25 07 4.25 07 6.25 25 52 6/76/0 48 0 Full Case locks Item no. Function / Description 706. Euro profile cylinder sashlock 2 75. Euro profile cylinder deadlock 2 72. Euro profile escape deadlock 702 Latch Forend Square Square Square Square Case depth 6, 76, 0mm 6, 76, 0mm 76, 0mm 6, 76, 0mm * Note: the rebate kit is appropriate for all case depth variants the case of bathroom locks Small Case locks 25 6/76/0 25 4 4/57/80 6/76/0 706.2 6 706.2 2 75.2 2 72.2 Oval profile cylinder sashlock Oval profile cylinder deadlock Oval profile escape deadlock Square Square Square 74 74 Bathroom lock 5mm spindle Bathroom lock 8mm spindle Square Square For radiused forend locks use Suffix R e.g 706.2R 70 2 7 Lever sashlock Lever deadlock Square Square For radiused forend locks use Suffix R e.g 70R 6, 76, 0mm 6, 76, 0mm 76, 0mm 6, 76, 0mm 6, 76, 0mm 6, 76, 0mm 6, 76, 0mm 52 4/57/80 25 6/76/0 52 25 2 7 52 47 08 Small Case locks 52 52 4/57/80 25 6/76/0 706. Item no. 2 7 70 72 72 Function / Description Lever deadlock Latch Bathroom deadlock 5mm spindle Bathroom deadlock 8mm spindle Forend Square Square Square Square Case depth 6, 76, 0mm 6, 76, 0mm 6, 76, 0mm 6, 76, 0mm 4/57/80 25 6/76/0 70 For radiused forend locks use Suffix R e.g 70R 52 47 08 Sliding door locks Item no. 2 78. Function / Description Euro profile clawbolt deadbolt Forend Square For radiused forend locks use Suffix R e.g 2 78.R Case depth 76, 0mm 52 52 72 4/57/80 74 4/57/80 28 www.laidlaw.net
ORBIS CLASSIC CYLINDERS Cylinders Suitable for use with all Orbis Classic cylinder mortice lock cases December 204 Resistance (when used with a 0 80 security escutcheon) face restricted for greater key control and security rim mortice cylinders available cylinder lengths standard differ variants. Supplied with 2 differ keys polished chrome to match and finishes 0 80. 0 82. 0 8. 0 805. Single cylinder 0 variable Single thumbturn 60/70/80 60/70/80 4 Length 40mm 45mm 50mm Length 40mm 45mm 50mm Euro profile 0 80. 0 80.2 0 80. Euro profile 0 8. 0 8.2 0 8. Oval profile 0 802. 0 802.2 Oval profile 0 82. 0 82.2 4Ø 25 2Ø 27 Double cylinder Length Euro profile Oval profile 0 804. 0 805. 60mm 70mm 80mm 0 82. 0 82.2 0 82. 0 822. 0 822.2 0 822. 0 80 0 25 22 Double cylinder & turn Length Euro profile Oval profile Cam locks Where a complete masterkeyed system is required, even cupboards or cabinets can be included on the system 0 806. 9.5 25 25 Rim cylinder 60mm 70mm 80mm Rim mortice cylinder 0 8. 0 8.2 0 8. Cam lock 0 82. 0 82.2 0 82. Scandinavian cylinders Where scandinavian locks are used, corresponding cylinders are available to suit internal and external variants 0 805. 0 804. 0 806. Scandinavian Internal Scandinavian External Scandinavian Pair Int/Ext 0 807. 0 808. 0 809. Specification advice Select the cylinder length to suit the combined thickness of the door and the hardware. The minimum cylinder projection is required for visual and security reasons. For locks fitted offcentre within the door thickness, offset cylinders are available to special order. 29 www.laidlaw.net
ORBIS CLASSIC SIGNS & SYMBOLS Card frames Slide in inserts are suitable for engraving or for applied lettering/ graphics. Item no. Description 60 90. Card frame 60 x 60mm 60 90.2 Card frame 80 x 60mm the insert cards to be inserted Tactile Symbols Orbis tactile signs incorporate a combination of visual identification, Braille, raised symbols and letters to assist visually impaired people to locate facilities within a building. signs to most flat surfaces 60 00. 60 00.2 Item no. Symbol 60 00. male 60 00.2 female PVC 60 00. disabled 60 00.4 baby change 60 00.7 telephone Disability Discrimination The use of tactile signage is a requirement of Part M2 of the Building Regulations 99 and it is recognises the use of tactile signs ensures people with visual impairments are considered under the requirements of the Disability Discrimination Act. Symbols A comprehensive range of face fixed symbols for general application in WC and washroom facilities and on fire door applications. Fire door keep shut Fire door keep locked Fire door keep locked shut Keep locked shut Automatic fire door keep clear 60 60 60 602 60 60 60 604 60 67 BS5499:5 2002 Fire door keep clear Fire exit keep clear Fire door keep closed 60 68 60 69 60 620 60 605 60 606 60 607 60 608 60 609 60 62 WC Push Pull Item no. Symbol SS PS SA PA 60 60 Fire Door Keep Shut 60 602 Fire Door Keep Locked 60 60 Fire Door Keep Locked Shut 60 604 Keep Locked Shut 60 605 Male 60 606 Female 60 607 Disabled 60 608 Unisex 60 609 Shower 60 67 Automatic Fire Door Keep Clear 60 68 Fire Door Keep Clear 60 69 Fire Exit Keep Clear 60 620 Fire Door Keep Closed 60 62 Baby Change 60 622 WC 60 62 Push 60 624 Pull 60 622 60 62 60 624 0 www.laidlaw.net
ORBIS CLASSIC SIGNS & SYMBOLS Fire Exit Signs Fire exit signs are used on doors, emergency or fire escape routes. The Orbis Classic range of fire exit signs incorporates 75mm letter height to comply with Fire Precautions Act 97 and include 'symbol only' versions to suit EC Council Directives. Council Directive 92/558/EEC and Fire Precautions Act 97 or self adhesive pads for alternative fixing method finish and fixing combinations: Aluminium screw fixed Aluminium self adhesive Vinyl self adhesive Plastic screw fixed Plastic self adhesive Photoluminescent Signs The signs shown on this page are also available in photoluminescent material which are energised by exposure to light. When the light source fails, the material emits a highly visible luminescense which lasts for several hours. The natural photoluminescent daylight colour of light green has been officially recognised in BS 5499 and BS 578 as suitable for use in safety signs. 60 4. 60 4.2 60 0. 60 42. 60 42.2 60 4. 60 4.2 60 44. 60 44.2 60 4. 60 4.2 60 47. 60 47.2 60 46. 60 46.2 FIRE EXIT 60 0. 00mm x 60mm 60 02. 00mm x 60mm FIRE EXIT FIRE EXIT 60 0. 00mm x 60mm FIRE EXIT 60 04. 00mm x 60mm Sizes The standard signs are available in order. Please Note The signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown. 60 45. 60 45.2 Dimensions. 00mm x 240mm.2 50mm x 60mm Break glass to reach latch in event of fire 60 48. 60 48.2 Break glass bolt to open in event of fire FIRE EXIT 60 04.2 200mm x 600mm Break glass/cover in event of fire Break glass for key in event of fire 60 07 75mm x 50mm 60 070 75mm x 50mm 60 072 75mm x 50mm 60 07 75mm x 50mm Push pad to open Push bar to open Push bar to open Push bar to open 60 055 50mm x 50mm 60 05 225mm x 225mm 60 056 50mm x 280mm 60 054 40mm x 470mm Light switch for fire escape 60 060 00mm x 40mm Light switch for emergency exit External emergency light switch 60 062 00mm x 40mm 60 06 00mm x 40mm Push bar to open 60 052. 65mm x 280mm 60 052.2 0mm x 565mm www.laidlaw.net
ORBIS CLASSIC SIGNS & SYMBOLS Safety & Security Signs Safety and security signs are mandatory and require a specific behaviour or action to be taken. By separating the symbol and the wording the signs are designed to comply with EC Council Directive 92/58/EEC. 60 0 Council Directive 92/58/EEC background or self adhesive pads for alternative fixing method and English are also available finish and fixing combinations: Aluminium screw fixed Aluminium self adhesive Vinyl self adhesive Plastic screw fixed Plastic self adhesive 60 45.! Fire escape keep clear 60 06! Fire exit keep clear Sizes Signs 60 00 to 60 048 are 80mm x 80mm. Signs 60 45.2 & 60 46.2 are 400mm x 00mm. Signs 60 45. & 60 46. are 200mm x 50mm. signs. Please contact your Laidlaw Technical Consultant for further details. Please Note The signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown. 60 45.2 400mm x 00mm 60 46.2 400mm x 00mm! Fire escape keep clear! Fire exit keep clear 60 45. 200mm x 50mm 60 46. 200mm x 50mm Automatic fire door Keep clear Fire door Keep locked Secure door open when premises are occupied Fire check door Keep clear This door will automatically close when the alarm system is operated Test release device weekly This door to be kept locked shut when not in use Keep unlocked during working hours 60 00 60 0 60 02 60 0 60 04 60 05 Alarm will sound if this door is opened Keep locked shut Close this door Automatic fire door Keep clear Close at night Remove security fastening when premises are occupied Fire door Keep shut 60 06 60 07 60 08 60 09 60 040 60 04 This door is connected to the alarm system and must not be opened except in emergency This door must not be locked or bolted when premises are occupied Fire door keep shut when not in use Close at night and in emergency This door must be kept closed Close this door at night 60 042 60 04 60 044 60 045 60 047 60 048 2 www.laidlaw.net
ORBIS CLASSIC DOOR STOPS & HOLDERS Door Stops & Skirting Buffers Designed to fix onto the wall, skirting or floor to limit the opening of the door and to protect door hardware from damage Skirting buffer Item no. Projection 2 800. 75mm 2 800.2 95mm different hardware Concealed rose fixed Item no. Projection 2 80. 75mm 2 80.2 95mm 2 80. 2 800. 2 800.2 2 800. & 2 800.2 2 80. 2 8 Wall or floor mounted Item no. Projection 2 8 40mm 9Ø 75 / 95 52Ø 75 / 95 52Ø 40 Floor mounted Item no. Projection 2 802 24.5mm 2 80 40.5mm SS PS SA 24.5 Door Stops & Door Holder Designed for floor mounting in timber or solid substrates. The dual purpose door stop & holder will act as a door stop and can be pushed down to act as a door holder. 2 845 2 850 Lockable Item no. Face Plate 2 840 round 45mm 2 85 square 45mm under heavy usage the retracted position face plate 2 85 2 840 Nonlockable Item no. Face plate 2 850 round 45mm 2 845 square 45mm Specification advice Door holders must not be used on fire door applications. 52 45 25Ø 25Ø 52 20 2.5 20 2.5 45Ø 45Ø 5Ø 29Ø 2 802 40.5 2 80 www.laidlaw.net
ORBIS CLASSIC PULLS, HOOKS & WC FITTINGS Flush Pulls screws for surface fixing 20mm thick minimum 50 00 6 800 Flush pull Item no. Size (mm) 6 800 00 x 50 Cylinder Pulls 62 800.0 62 800. 62 800.2 A series of face fixed cylinder pulls suitable for use with rim nightlatches and mortice nightlatches. screws for surface fixing included 62 800. 62 800.8 Cylinder pulls Item no. Function 62 800.0 blank 62 800. lever key locks 62 800.2 oval profile cylinder 62 800. euro profile cylinder 62 800.8 round (rim) cylinder 45 8 Hooks & WC Fittings A compact series of hooks and wc fittings. Additional items may also be available from the Orbis Premier Series of hardware. Hooks Item no. Function 8 80 hat & coat hook 8 802 buffered hat/coat hook 8 80 robe hook 8 804 buffered robe hook 8 80 8 804 8 802 8 80 80 802 Indicator bolt Item no. Size (mm) 89 00 62 x 40 x 0 SCP 89 90 75 x 52 // 89 90 89 00 WC roll holder Item no. Size (mm) 80 802 49 x 74 x 80 802 0 x 72 x 28 4 www.laidlaw.net
ORBIS CLASSIC FLUSH & SLIDE BOLTS Flush Bolts A series of lever action flush bolts, primarily intended for mounting in the leading edge or inside face of the normally closed leaf of a pair of doors or a leaf and a half. door heights variants 4 005. 4 005.2 4 007.2 4 005. Square ended bolts ESS Item no. Length EPS 4 005. 50mm 4 005.2 200mm 4 005. 00mm Radius ended bolts ESS Item no. Length EPS 4 007. 50mm 4 007.2 200mm 4 007. 00mm Square end SS and PS finish flush bolts are made from 8mm wide section. All radius end and SA square end flush bolts are made from 20mm wide section. Flush Bolts Knob Slide A series of sliding knob flush bolts designed for mounting on the inside face of the normally closed leaf of a pair of doors or a leaf and a half. door heights 4 006.2 Knob slide bolts PCP Item no. Length SCP SA 4 006. 52mm 4 006.2 229mm 4 006. 05mm Surface Bolts A series of surface mounted bolts in straight and cranked formats. door heights screws 4 00.2 4 00. 4 0.2 Surface bolt straight Item no. Length 4 00. 50mm 4 00.2 200mm SA 4 00. 250mm Surface bolt cranked Item no. Length 4 0. 00mm 4 0.2 50mm ESS EPS SA Bolt Sockets Sockets for flush bolts. Floor mounted, suitable for mm diameter shoots only. variant floor substrates 4 028 4 029. Floor sockets Item no. Type 4 028 easy clean 4 029. dust excluding SCP SA 5 www.laidlaw.net
ORBIS CLASSIC PANIC EXIT HARDWARE Pushbar Devices When lives may depend on an exit device Laidlaw feel they have a responsibility to test products to exceed all current performance and safety standards, ensuring they will operate first time, every time. Rigorous testing is continually being carried out on the Laidlaw range of exit hardware providing peace of mind for specifiers, distributors, installers and users. Low operating force Repeatedly tested to operate at 50% lower than the standard requirement, ensuring that the door can be operated with minimum force, for example by small children, the elderly and people with special needs. Two tests are undertaken. The first is to operate the door with a maximum force of 80 Newtons. The second test simulates a panic situation whereby the door is put under 000 Newton pressure to simulate a group of people pushing against the door. The operating force on the device with this weight should not exceed 220 Newtons. Abusing the bolt Testing the strength of the bolt involves the equivalent of the combined strength of 4 people trying to pull the bolt away from the door. An attempted breakin is simulated to test the security of the bolt, force is applied to the antithrust device as if the Corrosion resistance A test which measures how suitable the exit device is for varying environmental conditions. All Briton 76E series panic and emergency exit hardware have been tested to EN 670 Building Corrosion Requirements and have achieved at least grade (high resistance). This ensures the product will function correctly in wet, polluted and exterior environments. Note, EN 670 test does not relate to the finish. The standard EN 79 features a number of tests used in EN 25 but has different levels of security testing. EN Classification Codes Category of use Class = high frequency of use by public and others with little incentive to exercise care. Abusing the crossbar The crossbar is attacked with a force equivalent to that of a 6 stone man (000 Newtons) pulling and pushing it in all directions and standing on it, after which the bar must still operate. Cycle testing Cycle tested to measure durability for everyday use. Briton 76E series products exceed the highest requirement of 200,000 cycles. The finger trap test To reduce the risk of trapping fingers and/or the blocking of the panic device, any gap shall not trap a test rod of 0mm diameter at any position of the bar travel during the operation of the panic device. Under both standards each product is classified and graded to identify the level of compliance within each category. These classifications are set out opposite. () 7 (6/7) 6 (5/6) (0/) () 4 (/4) 2 (2) 2 (/2) B (A/B) Durability (Cycle Testing) Grade 6 00,000 cycles Grade 7 200,000 cycles Door size/mass Class 5 doors up to 00kg Class 6 doors up to 200kg. Fire Resistance (EN 64) Classification suitable for fire/smoke door use Classification 0 not suitable for fire/smoke door use Safety All panic and emergency devices have a critical safety function therefore only grade is identified. Corrosion Resistance (EN 670) Grade high resistance Grade 4 very high resistance. Security EN 25 Grade 2 up to 000N. EN 79 Grade 2 000N Grade 2000N Grade 4 000N Projection of Device Class projection up to 50mm Class 2 projection up to 00mm Type of Operation EN 25 Type A 'push bar' operation Type B 'touch bar' operation EN 79 Type A 'lever handle' operation Type B 'push pad' operation 6 www.laidlaw.net
ORBIS CLASSIC PANIC EXIT HARDWARE Pushbar range EN 25 Where personnel have not been trained in the location and operation of the buildings exit devices or members of the public have access, exit devices conforming to EN 25 must be specified and installed. IMPORTANT If you are in any doubt at all ALWAYS use products that conform to EN 25 The following range consists of a vertical panic bolt, rim panic latch and a mortice nightlatch arc withdraws either the bolts or the latch, releasing the door for immediate escape in the event of an emergency. 59 776 Vertical panic bolt 59 778 Reversible rim panic latch 59 777 Rebated double door panic set Item no. Description 59 776. Panic bolt 59 776.2 Panic bolt alarmed 59 776. 59 776.4 59 776.5 Panic bolt with Pulmans Panic bolt with dogging Panic bolt with Pulmans & dogging Item no. Description 59 778. Rim panic latch LH 59 778.2 Rim panic latch RH 59 778. 59 778.4 Rim panic latch LH with dogging Rim panic latch RH with dogging Item no. Description 59 777. Double rebated door panic set LH 59 777.2 Double rebated door panic set RH Double rebated door panic set Comprises a vertical panic bolt and reversible rim panic latch complete with a double door strike in one convenient pack. 7 www.laidlaw.net
ORBIS CLASSIC EMERGENCY EXIT HARDWARE Push pad range EN 79 Products conforming to EN 79 are only intended for use by personnel who are fully aware of the escape routes and have been trained to operate these devices. The following range consists of a push pad vertical bolt, reversible push pad rim latch and push pad mortice nightlatch. Each product when operated withdraws either the bolts or the latch, releasing the door for immediate escape in the event of an emergency. These products should never be used in areas open to the general public. 59 779 Mortice panic nightlatch 59 772 Push pad vertical bolt 59 78 Reversible push pad rim latch Item no. Description 59 779. Mortice panic nightlatch 59 779.2 Mortice panic nightlatch alarmed 59 779. Mortice panic nightlatch with dogging Item no. Description 59 772 Emergency push pad vertical bolt Pad operated vertical bolt suitable for and double doors up to 2500mm high x 00mm wide Item no. Description 59 78 Emergency push pad latch reversible Pad operated rim latch for use on doors and first opening leaf of double rebated doors. Reversible on site, the latch can be used with a rim cylinder fitted to the outside of the door Mortice panic nightlatch Mortice nightlatch operated by panic push bar. Suitable for doors and the first opening leaf of a double door application. 8 www.laidlaw.net
ORBIS CLASSIC PANIC EXIT HARDWARE To provide access from outside the Laidlaw 59 700 Series includes a lever or knob operated unit which can be integrated with the panic or emergency device series of EN compliant exit devices. separately) Cylinders can be keyedalike or masterkeyed stainless steel and polished brass. Item no. Description 6 4KE/NC Knob OAD No cylinder 6 4KE Knob OAD With cylinder 6 4/LE lever variant to fail if the lever is severely abused (e.g. attempted break in, or vandalism) ensuring the mechanism is protected from damage. The shear pin can then be simply replaced to restore normal operation. Item no. Description 6 4LE/NC Lever OAD No cylinder 6 4LE Lever OAD With cylinder 6 4/KE knob variant conditions. 57 76. Flush face keeper plate 59 776.4, 59 776.2, and 59 772 is a flush head frame a flush face keeper plate can be used to secure the bolt. 57 78DDS Double door strike panic latch on the first opening leaf and a vertical bolt on the second opening leaf. 57 76.2 Extra long top shoot doors in areas that require the push bar to be in a lower position ie schools. It can also be used on doors up to 50mm high, however doors over 2500mm are outside the scope of EN 25 and EN 79. 59 776., 59 776.4, 59 776.5, and 59 772. 9 www.laidlaw.net
ORBIS CLASSIC PANIC EXIT HARDWARE All exit devices and outside access devices are now available in a wide range of finishes including: Powder coated finishes range of colours to match the Normbau range of nylon architectural hardware. Dual finishes green and white, black and red All coloured finishes are now powder coated for increased durability and have been saltspray tested in excess of 240 hours. Metallic plated finishes satin stainless steel (SS), polished stainless steel (PS), polished brass (PB) Double door strikes and metal door strikes are now available colour matched. Colour coded powder coated silver (SES). Pushbar/Touchbar Silver 2. Main and end casing covers Silver. Upper, lower or side Pullman covers Silver 4. Rods Silver Coloured powder coated. Pushbar/Touchbar Choose from powder coated swatches 2. Main and end casing covers Matt Black. Upper, lower or side Pullman covers Matt Black 4. Rods Matt Black Metallic powder coated. Pushbar/Touchbar Choose from metallic swatches 2. Main and end casing covers Matt Black. Upper, lower or side Pullman covers Matt Black 4. Rods Matt Black Due to the limitation of the printing process, we suggest you check your final choice of finish against the actual products or a sample swatch Metallic Powder Coated Satin Stainless Steel (SS) Polished Brass (PB) Silver (SE) Matt Black (BM) (BE) Gold (GE) White 9 (NWH) RAL 906 Black 6 (BM) RAL 9005 Manhattan 67 (NMG) RAL 708 Dark Grey 8 (NDG) RAL 704 Polished Stainless Steel (PS) Slate Blue 6 (NSB) RAL 504 Blue (NBU) RAL 5002 Dark Blue 7 (NDB) RAL 500 Ivory 65 (NIV) RAL 0 Yellow 22 (NYE) RAL 02 Green (NGR) RAL 606 Red 2 (NRE) RAL 00 Dark Red 5 (NDR) RAL 005 40 www.laidlaw.net
STANDARDS & BS EN CLASSIFICATIONS The standards compliance of Orbis Classic products falls into categories considered suitable for use in DDA applications BS EN Standards are the benchmark for product performance in several major product areas within architectural hardware. Each standard prescribes a set of test procedures for products which are selected at random from stock production items. The test data and product evaluation produces a multi digit classification code which runs in parallel across each product area (or as close as practically possible). The relevant BS EN standards are summarised opposite. Further details of these BS EN standards are available from The Association of Builders Hardware Manufacturers at www.abhm.org.uk CE Marking is applicable only to those products where the BS EN Standard has been harmonised under the Construction Products Directive. BS EN 906 is the European standard for 'Lever handles & knob furniture' and is applicable only to items which are used to operate locks or latches. Testing and evaluation results in an 8 digit code. 4 7 67 0 0 0 04 2 04 Example Orbis 54 800.9 lever classification 702U U ABU BS EN 2209 is the European standard for 'Mechanically Operated Locks and Latches'. The standard is wide ranging and covers physical testing of the lock and also classifies it according to the method of operation. Testing and evaluation results in an digit code. BS EN 2209 is harmonised under the Construction Products Directive and CE marking of approved products is permitted. X AW 8 9 0 0 0 F 0G 2 7 B ABU Example Orbis 85 Lockcase classification X80F2BA20 A 0H 2 04 0 0H Digit Category of Use (Grades to 4) Grade is high frequency use by the public with a high chance of misuse. Digit 2 Durability (Grade 6 or 7) Testing to 00,000 (Grade 6) or 200,000 cycles (Grade 7) Digit Door Mass (No requirement) Digit 4 Fire Resistance (Grade 0 or ) Grade 0 is not suitable for fire door applications Digit 5 Safety (Grade 0 or ) Digit 6 Corrosion Resistance (Grade 0 to 4) Grade is the minimum for external applications Digit 7 Security (Grade 0 to 4) Digit 8 Type of Operation (Type A, B or U) Type U is unsprung lever furniture Digit Category of Use (Grades to ) Grade is high frequency use by the public with a high chance of misuse. Digit 2 Durability (Grades A to W) A complex grading sytem based on a combination of side load and test cycles Digit Door Mass (Grades to 9) A complex grading system based on a combination of door mass and maximum closing force required Digit 4 Fire Resistance (Grade 0 or ) Grade 0 is not suitable for fire door applications Digit 5 Safety (Grade 0 or ) Digit 6 Corrosion Resistance (Grade 0 & AG) Digit 7 Security (Grade to 7) Digit 8 Field of Door Application (Type A to R) Digit 9 Type of Key Operation (Grade 0 & A to H) Digit 0 Type of Spindle Operation (Grade 0 to 4) Digit Key Identification (Grade 0 & A to H) BS EN 54 is the European standard for 'Controlled Door Closing Devices'. The standard measures mechanical door closer performance resulting in a 6 digit classification. BS EN 55 is a parallel standard for 'Electrically Powered Holdopen Devices' and is therefore relevant to Electromagnetic door closers. Such closers must satisfy the requirements of both standards, BS EN 54 and BS EN 55. BS EN 54 and BS EN 55 are both harmonised standards and CE marking became mandatory in 2004 Digit Category of Use (Grades to 4) (Grade ) Defines the angle from which it will close the door Digit 2 Durability (Grade 8 only) (Grades 5 to 8) Grade 8 describes 500,000 test cycles for both standards but is the only grade available in BS EN 54 Digit Door Mass (Grades to 7) (Grades to 7) Identifies the closing power of the closer by max. door width and weight (see chart below) Power size 2 4 5 6 7 4 4 8 8 8 58 7 7 4 04 4 04 BS EN 54 classification BS EN 55 classification Example Orbis 80 Smoothline closer classification 48 max. door size width mm weight kg 750 20 850 40 950 60 00 80 250 00 400 20 Digit 4 Fire Resistance (Grade 0 or ) (Grade ) Grade 0 is not suitable for fire door applications. Grade must be supported by fire tests to BS EN 64 Digit 5 Safety (Grade only) Grade identifies the closer is hazard free Digit 6 Corrosion Resistance (Grade 0 to 4) 600 60 4 www.laidlaw.net
STANDARDS & BS EN CLASSIFICATIONS Fire Testing Individual products are not in themselves fire tested, but are included as an integral part of a fire test carried out on a timber or steel fire door. As a consequence, the details of the test, the construction of the door, the inclusion of intumescent material etc must be considered when specifying products suitable for use on a fire door. Where Laidlaw products are indicated as suitable for fire door applications, the products have been successfully included on the test door which has achieved the stated rating. Laidlaw holds comprehensive test certification for all appropriate products and these are available on request. BS EN 25 & BS EN 79 Products which are designed to provide safe and effective escape from a building in an emergency situation are covered by two European standards which have clearly defined applications. BS EN 25 is the European standard for 'Panic Exit Devices'. The primary determining factor is that a 'Panic' device must be fitted where members of the public are present and have no prior knowledge of the exit or the hardware. BS EN 79 is the standard covering 'Emergency Exit Devices'. In 'Emergency' situations it is assumed the occupants will have prior knowledge of the exit and a panic situation is unlikely to occur. Testing and evaluation to each standard results in a 9 digit code. BS EN 25 and BS EN 79 are harmonised under the Construction Products Directive and products must therefore carry the CE mark. 7 67 6 56 0 4 4 2 2 2 2 Example Orbis 59 778 Panic Device classification 76422B B AB Digit Category of Use (Grades ) Grade is high frequency use by the public with a high chance of misuse. Digit 2 Durability (Grades 6 or 7) Cycle testing, Grade 7 having undergone 200,000 cycles Digit Door Mass (Grades 5 or 6) Determined only by door mass of 00g or 200kg Digit 4 Fire Resistance (Grade 0 or ) Grade 0 is not suitable for fire door applications Digit 5 Safety (Grade only) All panic and emergency exit devices have a critical safety function Digit 6 Corrosion Resistance (Grade or 4) Digit 7 Security (Grade 2 only) (Grade 2 4 in BS EN 79) Digit 8 Projection of Device (Grade or 2) Grade 2 is low projection, less than 00mm Digit 9 Type of Device (Type A or B) BS EN 25 Type A is a pushbar operation BS EN 25 Type B is touchbar operation BS EN 25 Type A is with lever handle operation BS EN 25 Type B is with push pad operation BS EN 95 is the European standard for 'Single Axis Hinges' used on doors and windows. Testing and evaluation of the product results in a 8 digit code. BS EN 95 is harmonised under the Construction Products Directive and products must therefore carry the CE mark. 4 7 47 6 07 0 04 0 0 4 Example Orbis 7 80. hinge classification 76422A Digit Category of Use (Grades to 4) Grade is heavy duty use. Digit 2 Durability (Grades, 4 or 7) Cycle testing, Grade 7 having undergone 200,000 cycles Digit Door Mass (Grades 0 to 7) Table of door mass from 0kg up to 60kg Digit 4 Fire Resistance (Grade 0 or ) Grade 0 is not suitable for fire door applications Digit 5 Safety (Grade only) All hinges have a critical safety function Digit 6 Corrosion Resistance (Grades 0 to 4) Grade is high resistance Digit 7 Security (Grade 0 or ) Grade 0 is not suitable for burglar resistance Digit 8 Hinge Grade (Grades to 4) Grading is by combination of test cycles and door mass. Grade is 200,00 cycles of a door mass of up to 20kg 42 www.laidlaw.net
DDA, APPROVED DOC. M & BS 800 The implementation of legislation in 996 made it a legal duty on those responsible for buildings used by the general public, and employers responsible for places of work, to ensure that the building and its facilities are accessible to disabled people. The aim of The Disability Discrimination Act (DDA) is to make it a duty to avoid discrimination againsts disabled people and this duty requires that Service Providers make "reasonable" adjustments to the design of the building in order to provide this universal level of access. The details on this page are a simple summary of the primary sources of information related to the use of hardware products in order to satisfy disabled access. The Disability Discrimination Act It is important to remember that the Disability Discrimination Act is civil rights legislation and does not set out specific requirements or guidance in the design of buildings. As such it is therefore not appropriate to attach any notion of conformity to products, such as "DDA compliant" or "Conforms to DDA requirements". The legislation came into force on st October 2004. Any new building or alterations to existing buildings, in order to satisfy obligations under the DDA, must comply (in England & Wales) with The Building Regulations, and in particular, the 2004 edition of Approved Document M (ADM) which became effective in May 2004. Where certain issues are not covered in ADM, further reference will be made to BS 800. Further detailed information can be obtained from the following: Office of the Deputy Prime Minister www.odpm.gov.uk Association of Buildiers Hardware Manufacturers www.abhm.org.uk BSI Customer Services cservices@bsiglobal.com Office of Public Sector Information www.uklegislation.hmso. gov.uk Disability Rights Commission www.drcgb.org Guild of Architectural Ironmongers www.gai.org.uk Approved Document M (ADM) The main requirements set out in ADM are, as with all parts of The Building Regulations, performance based and the guidelines set out in the document are recognised as one way of achieving the requirements. The scope of the requirements are clearly set out, requiring that provision is made for people to "a) gain access to and b) use the building and its facilities". This includes the provision of sanitary accomodation in domestic and nondomestic buildings. ADM applies not only to new building but also to alterations and extension of existing buildings. Where certain issues are not covered within ADM, further reference will be made to BS 800. ADM contains a number of very specific requirements for the following aspects related to architectural hardware specification. Accessible Doors ADM recognises that negotiating entrance doors can be difficult for the general public, not just disabled people: parents with children, those carrying luggage or with pushchairs etc. It is stated within ADM that doors which are required to be self closing must require a force no greater than 20N at the leading edge in order to open them. In most practical applications "A powered door opening and closing system... is the most satisfactory solution for most people" (ADM 2.0). generally superceded by a twophase criteria established within BS 800 in 2005. This states a maximum opening force of 0N at the initial opening stage (0 to 0 ), reducing to 22.5N from 0 to 60 opening angle. Fire & Smoke Doors BS EN 54 requires fire doors to be held closed by a door closer (see chart below) and therefore puts it into conflict with the 20N opening force requirement of ADM. In these circumstances ADM recommends the use of electromagnetic hold open or low energy door operators. For fire doors within corridors the preference is for electromagnetic hold open units. Where privacy is still a requirement, such as doors to individual rooms, an electromagnetic device which offers a 'swing free' facility is preferable. BS EN 54 min. closing moment Min. closing force (moment/door width) BS EN 54 min. closer efficiency Corresponding min. opening force BS EN 54 9 Nm 0.59 N 50% 2.8 N Note: calculations are based on a door leaf width of 850mm. BS EN 54 8 Nm 2.7 N 55% 8.5 N Internal Doors For internal doors which need to be self closing for privacy or environmental reasons, they must meet the maximum opening force criteria of 20N. In these circumstances a high efficiency variable ) to reduce the opening force it may cause problems in latching the door, especially in locations which may be susceptible to drafts or air pressure differences. Locks with a 'soft action latch' and high quality hinges will help in making sure the door latches properly each time. BS 800:200 This standard provides guidance on good practice in the design of buildings to make them suitable for use by disabled people. The standard is often used as a supplement to ADM and includes more specific of door operating hardware. BS 800 contains the following recommendations related to architectural hardware specification. Accessible Doors in BS 800 points clearly to the use of powered solutions including low energy operators to achieve the level of accessibility required on external doors (including recommendations for the positioning of any manual controls. Fire & Smoke Doors Doors to escape stairs and final exit doors are not specifically covered in ADM. In BS 800 it is considered suitable to use a conventional door closer in these cases, as such doors are likely to be opening in the direction of escape (ie push to exit). In these situations BS 800 recommends a maximum opening force of 0N. Closing & Opening forces As can be seen from the chart opposite, a door closer in the EN standard (50%) will not satisfy the maximum opening force to satisfy the 20N limit in ADM. Also min. allowed in satisfying the requirements for a fire door) has an opening force at the edge of the door beyond the 0N maximum allowed in the revised regulations. Only high efficiency closers will therefore meet the dual requirements for an accessible fire door. 4 www.laidlaw.net
DDA, APPROVED DOC. M & BS 800 Lever handle dimensions 9mmØ 'generous length' Lock & latch critical dimensions BS 800 54mm minimum 45mm minimum 72mm minimum Approved Document M (ADM) Door Opening Hardware Guidance on the specification for door hardware falls into 2 main categories ability to grip and operate the hardware ability to visually locate the hardware Ability to grip and operate the hardware The requirement within ADM is that "where fitted with a latch, the door opening furniture can be operated with one hand using a closed fist, e.g. a lever handle" (ADM 2.7). Whilst no specific dimensional requirements are laid down in ADM, such recommendations are covered in BS 800. It is a requirement of ADM that external handles (ie those used to open manual external doors), should not be 'cold to the touch'. Whilst most people will find a bare metal handle unpleasant to grip in the depths of winter, for some, particularly elderly people, it can be quite painful. Pull handle recommendations BS 800 handle BS 800:200 Door Opening Hardware BS 800 is more detailed in its recommendations, prescribing dimensional parameters for locks & latches, lever and pull handle furniture. Locks & latches To improve physical and visual access to the lever and lock keyway, the distance from the edge of the door and between the lever and keyway should be maximised; "..the cylinder should either be above the lever handle, or the minimum distance between the handle and the keyway.. should be 72mm." (BS 800 6.5..2) It also requires a backset of 54mm minimum (from edge of door to the lockcase operating centre see diagram opposite). Lever handles The principal requirements are that "where possible, door opening furnitue with a lever action should be used... without tightly grasping it or twisting the wrist e.g by using a closed fist".it also recommends levers return to the door face at the open end to aid the grip and avoid catching clothing. Dimensional characteristics for lever handles are covered by Fig. 7 of BS 800. See diagram opposite. Whilst lever handles are the preferred solution, there are circumstances where other issues can take precedence. The requirement to prevent self harm is one such issue where the risk associated with the lever furniture takes precedence over disabled access. Such situations will be covered by the provision of an Access Statement at the planning stage. Pull handles Recommendations are included concerning the min. length 600mm 900 00mm 000 preferred 400mm kicking plate 000mm 400mm opposite Recommendations also include the provision of a enable wheelchair users to pull the door closed.see diagram opposite. Building Regulations in Scotland & Northern Ireland Technical Handbooks are published to guide specifiers in Scotland and Northern Ireland in much the same way as ADM but are not as detailed, offering little or no guidance in the specification of door hardware although the amended Technical Booklet (Part R) published in Northern Ireland does contain specific information related to handrailing and sanitary fittings. In most cases the Handbooks for Scotland refer specifiers to the guidance contained in BS 800. Grab rails Part M of Approved Document M of The Building Regulations covers the provision of sanitary facilities. Whilst not specifically part of the Orbis Classic range, we have a full range of grab rails and disabled fittings. Please contact your Laidlaw Technical Consultant for further details. 44 www.laidlaw.net
DDA, APPROVED DOC. M & BS 800 Approved Document M (ADM) Continued Colour contrast & light reflectance For people with impaired vision the ability to identify key objects in the environment determines their ability to live independantly. It is a requirement of ADM that "all door opening furniture (on manually operated doors) contrasts visually with the surface of the door" (ADM 2.7). "All door furniture should contrast in colour and luminance with the surface of the door..." (BS 800 6.5.) The measure of brightness or luminance is measured by the amount of light which objects reflect (Light Reflectance Value LRV). Whilst people with impaired vision may not be able to easily identify colour they will generally be able to identify some reflected light. The greater the difference in LRV between the door and the hardware, ie the contrast between the two, the easier the hardware will be to locate. On a basic scale of 00, where a black object which reflects very little light has a LRV of typically less than 0, the recommended contrast is 0 points of difference (although it is recognised that a value of 20 points may be adequate). The use of backplates could contribute to increasing the visibility of the operating hardware. Metallic finishes The suitability of metallic finishes is a complex issue due to numerous external factors which affect the percieved LRV of metallic substrates. The level and angle of incident light, the colour and nature of the door surface and the surrounding structure of walls, ceiling and floor will all have a bearing on the amount of light which each item of hardware reflects. It is therefore not possible to state which finishes are good and which are not; each must be judged in context to the surrounding environment. Recent Research The Research Group for Inclusive Environments was commissioned to undertake specific research in this area in association with the GAI (Guild of Architectural Ironmongers). A small (but nonetheless representative) group of visually impaired people tested actual ironmongery samples against various typical door finishes. Results showed that even at LRV differences of 0, over 72% of the test sample were confident of locating the hardware. It is thought that the D nature of the hardware, with its highlights and shadows contributes to the ease of location. Also, the nature of the hardware (gloss or matt) appeared to have no significant bearing on how easy it is to detect (see www.gai.org.uk for further information). Measurements Available to specifiers of Laidlaw products is a portable 'Spectrophotometer' which enables LRV readings to be taken of any material, for example door finishes and veneers, to compare with LRV readings of Laidlaw products. Please ask your Laidlaw Technical Consultant for more information. CPD seminars Laidlaw can provide a comprehensive series of RIBA approved CPD seminars including presentations covering DDA and Doc M issues. Subjects covered will include all aspects of colour contrast and demonstrations on the use of the 'Spectrophotometer'. CPD seminar at our Salford branch showing the use of the Spectrophotometer. 45 www.laidlaw.net
ORBIS CLASSIC INDEX item no. page item no. page item no. page item no. page item no. page 0 802. 29 0 802.2 29 0 80. 29 0 80.2 29 0 80. 29 0 804. 29 0 805. 29 0 806. 29 0 807. 29 0 808. 29 0 809. 29 0 80 29 0 82. 29 0 82.2 29 0 8. 29 0 8.2 29 0 8. 29 0 822. 29 0 822.2 29 0 822. 29 0 82. 29 0 82.2 29 0 82. 29 0 82. 29 0 82.2 29 0 82. 29 0 8. 29 0 8.2 29 0 8. 29 07 0. 28 07 0.R 28 07 0.25 28 07 0.25R 28 07 2. 28 07 2.R 28 07 2.25 28 07 2.25R 28 07 4. 28 07 4.R 28 07 4.25 28 07 4.25R 28 07 6. 28 07 6.R 28 07 6.25 28 07 6.25R 28 08 850 27 08 85 27 08 852 27 08 85 27 08 854 27 08 855 27 08 856 27 08 857 27 08 860 26 08 86 26 08 862 26 08 86 26 08 864 26 08 865 26 08 866 26 08 867 26 0 85 27 0 85R 27 0 86 26 0 86R 26 70 28 70R 28 702 28 702R 28 702.2 28 702.2R 28 702. 28 702.R 28 706.2 28 706.2R 28 706. 28 706.R 28 85 27 85R 27 86 26 86R 26 862 26 862R 26 2 78. 28 2 78.R 28 2 72.2 28 2 72.2R 28 2 72. 28 2 72.R 28 2 7 28 2 7R 28 2 75.2 28 2 75.2R 28 2 75. 28 2 75.R 28 2 85 27 2 85R 27 2 86 26 2 86R 26 70 28 70R 28 702 28 702R 28 72 28 72R 28 74 28 74R 28 85 27 85R 27 852 27 852R 27 86 26 86R 26 862 26 862R 26 27 4 22 27 20 22 27 50 22 27 6 22 27 64 22 27 65 22 27 5 2 27 5. 2 27 5FMB 2 27 66 22 27 664 22 27 665 22 27 765 22 27 85 8 27 854 8 27 855 8 27 865 6 27 89.0 8 27 894.0 8 29 00 24 29 0 24 29 02 24 29 0 24 29 06/L 24 29 06/R 24 29 07 24 0 764 2 40 764/DA 2 0 86/DA 2 0 864/DA 2 0 864/F 2 0 864/FS 2 0 864/HO 2 0 865/F 2 0 865/FS 2 0 865/HO 2 0 866/DA 2 0 866/F 2 0 866/FS 2 0 866/HO 2 0 20 0. 20 20. 20 20. 20 700 9 70 9 70.0 9 702 9 70.0 9 70V 9 706 9 70 9 7 9 72 9 7V 9 76 9 726 9 76 9 800 8 80V 6 806 6 807 8 807.0 8 808 8 80 8 8V 6 86 6 87 8 88 8 826 6 86 6 2 800. 2 800.2 2 800.8 4 2 80. 2 80.2 2 802 2 80 2 8 2 85 2 840 2 845 2 850 4 005. 5 4 005.2 5 4 005. 5 4 006. 5 4 006.2 5 4 006. 5 4 007. 5 4 007.2 5 4 007. 5 4 00. 5 4 00.2 5 4 00. 5 4 0. 5 4 0.2 5 4 028 5 4 029. 5 6 4KE 9 6 4KE/NC 9 6 4LE 9 6 4LE/NC 9 7 800. 25 7 800.2 25 7 80. 25 7 80.2 25 7 80. 25 7 80.2 25 7 879.5 25 7 879.6 25 50 800.0 0 50 800. 0 50 800..7 0 50 800.4 0 50 800.4.7 0 50 800.5 0 50 800.5.7 0 50 800.5 0 50 800.5.7 0 50 800.6 9 50 800.6CW 9 5 800.0 9 5 800. 9 5 800.2 9 5 800. 9 5 800.4 9 5 800.5 9 5 800.5 9 5 800.25 9 52 80 4 52 802 4 52 80 4 52 804 4 52 805 4 52 806 4 5 29.0 5 29.0BB 5 29.45 5 29.45BB 5 29.60 5 29.60BB 5 222.0 5 222.0BB 5 222.45 5 222.45BB 5 222.60 5 222.60BB 5 25.000 5 25.000BB 5 2.500 5 2.500BB 5 2.800 5 2.800BB 5 89.5 2 5 89.5BB 2 5 89.8 2 5 89.8BB 2 5 89.24 2 5 89.24BB 2 5 89.0 2 5 89.0BB 2 5 89.45 2 5 89.45BB 2 5 89.60 2 5 89.60BB 2 5 822.8 2 5 822.8BB 2 5 822.24 2 5 822.24BB 2 5 822.0 2 5 822.0BB 2 5 822.45 2 5 822.45BB 2 5 822.60 2 5 822.60BB 2 5 82. 5 82.BB 5 82.2 5 82.2BB 5 82.28 5 82.28BB 5 8.0 5 8.0BB 54 60.9 7 54 800.9 7 54 800.22 7 54 80.9 7 54 80.22 7 54 82.22 8 54 8.22 8 54 84.22 8 57 76. 9 57 76.2 9 57 78DDS 9 59 78 8 59 772 8 59 776. 7 59 776.2 7 59 776. 7 59 776.4 7 59 776.5 7 59 777. 7 59 777.2 7 59 778. 7 59 778.2 7 59 778. 8 59 778.4 8 59 779. 8 59 779.2 8 59 779. 8 60 00. 0 60 00.2 0 60 00. 0 60 00.4 0 60 00.7 0 60 0. 60 02. 60 0. 60 04. 60 04.2 60 00 2 60 0 2 60 02 2 60 0 2 60 04 2 60 05 2 60 06 2 60 07 2 60 08 2 60 09 2 60 040 2 60 04 2 60 042 2 60 04 2 60 044 2 60 045 2 60 047 2 60 048 2 60 05 60 052. 60 052.2 60 054 60 055 60 056 60 060 60 062 60 06 60 070 60 07 60 072 60 07 60 45. 2 60 45.2 2 60 46. 2 60 46.2 2 60 4. 60 4.2 60 42. 60 42.2 60 4. 60 4.2 60 44. 60 44.2 60 45. 60 45.2 60 46. 60 46.2 60 47. 60 47.2 60 48. 60 48.2 60 90. 0 60 60 0 60 602 0 60 60 0 60 604 0 60 605 0 60 606 0 60 607 0 60 608 0 60 609 0 60 67 0 60 68 0 60 69 0 60 620 0 60 62 0 60 622 0 60 62 0 60 624 0 60 90.2 0 6 800 4 6 800.0 4 6 800. 4 6 800.2 4 6 800. 4 80 802 4 8 80 4 8 802 4 8 80 4 8 804 4 89 00 4 89 90 4 FPL. 0 FPL.2 0 FPL2. 0 FPL2.2 0 FPL. 0 FPL.2 0 FPL5.2 0 FPP 4 FPP2. 4 FPP 4 FPP5 4 FPP6. 4 FPP7. 4 IP H 25 IP H2 25 LA58.9 LA58.22 46 www.laidlaw.net
As the UK's leading specifier and supplier of architectural hardware, timber doorsets and handrail & balustrade solutions, Laidlaw offers its unique service through a national network of 2 sales offices and trade counters. www.laidlaw.net Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset. Barnstaple, Branham Crescent Roundswell Business Park (West) Barnstaple, North Devon EX TD T: 027 920 F: 027 929 Bristol 8, Riverside Business Park St. Annes Road, St. Annes Bristol BS4 4ED T: 07 00 980 F: 07 980 058 Cardiff Ty Cefnfor, Ocean Park Cardiff CF24 5PE T: 029 2047 808 F: 029 2049 0250 Gateshead Halifax Court Halifax Road Dunston, Gateshead Tyne & Wear NE 9JT T: 09 46 400 F: 09 46 40 Liverpool 5 Century Building Summers Road Brunswick Business Park Liverpool, Merseyside L 4BL T: 05 709 948 F: 05 709 9455 London The Building Centre 26 Store Street London WCE 7BT T: 0207 46 0779 F: 0207 46 0740 Perth PO Box 5, Arran Road Perth PH DU T: 078 62058 F: 078 6262 Salford Centurion House Dakota Avenue, Salford Manchester M50 2PU T: 06 848 00 F: 06 872 9 Sales Office Trade Counter Distribution Centre Glasgow 4 Clifford Court 7 Woodville Street Ibrox Business Park Glasgow G5 2RQ T: 04 445 8892 F: 04 445 887 Kinmel Bay 7 Tir Llwyd Industrial Estate St Asaph Avenue Kinmel Bay, Rhyl North Wales LL8 5JA T: 0745 25 F: 0745 249 Sheffield 4 Sheffield Industrial Estate Surbiton Street Sheffield S9 2DN T: 04 24 896 F: 04 242 659 Willenhall Strawberry Lane Willenhall West Midlands WV RS T: 0902 600400 F: 0902 600490 To email a sales office use the following format: info.office@laidlaw.net e.g. info.bristol@laidlaw.net Timber Doorsets Saving up to 40% installation time and eliminating coordinating problems between doors and ironmongery, Laidlaw has pioneered the Orbis Timber Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to minimise onsite work. Architectural Hardware Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware, including Access Control, to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural hardware, including the renowned Orbis brand, is designed to comply with European building standards. Handrail and Balustrade Solutions Using a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation. Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars. Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery. While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown. a d v a n c i n g a r c h i t e c t u r a l i r o n m o n g e r y RS 0508 g a i r m e m b e Laidlaw Solutions Limited November 2007/L07/00