70-70 oercial ir onditioners 07/08 D Inverter hillers & D INVERTER oercial ir onditioner Division Midea Group dd.: Midea Headquarters Building, 6 Midea venue, Shunde, Foshan, Guangdong, hina Midea fter-service pplication Midea News pplication Postal code: 58 Tel: +86-757-686 Fax: +86-757-9005 cac.midea.com global.midea.com Note: Product specifications change from time to time as product improvements and ios Version ndroid Version ios Version developments are released and may vary from those in this document.
Midea Midea is a key division of the Midea Group, a leading producer of consumer appliances and provider of heating, ventilation and air conditioning solutions. Midea has continued with the tradition of innovation upon which it was founded, and emerged as a global leader in the HV industry. strong drive for advancement has created a groundbreaking R&D department that has placed Midea at the forefront of a competitive field. Through these independent efforts and joint cooperation with other global enterprises, Midea has supplied thousands of innovative solutions to customers worldwide. There are three production bases: Shunde, hongqing and Hefei. M Shunde: 8 product lines focusing on VRF, Split Products, Heat Pump ater Heaters, and HU/FU. M hongqing: product lines focusing on ater ooled entrifugal/screw/scroll hillers, ir ooled Screw/Scroll hillers, and HU/FU. M Hefei: product lines focusing on VRF, hillers, and Heat Pump ater Heaters. Midea ompany Introduction Midea Introduction 06 Strategic alliance between Midea and Italy s livet 05 JV with arrier in hina in chiller field, launched the unitary all D inverter type qua Mini hiller 0 Launched the D Inverter 0 Launched the super high efficiency centrifugal chiller with full falling film technology 0 Formed Midea-arrier JV.ompany in India and HK 00 Built the rd manufacturing base in Hefei 009 Launched the unitary fixed type qua Mini hiller 008 Launched the split digital type qua Mini hiller 006 Launched the first VSD centrifugal chiller 00 cquired MGRE entered the chiller industry 00 ooperated with opeland to develop the digital scroll VRF system 000 Developed the first inverter VRF with Toshiba 999 Entered the field
qua Mini hiller qua Mini hiller Reference Projects Hotel INVERTER ① ② ③ ① SEM Resort Villa Five Star ② Sheraton Bandara Resort Hotel Five Star ③ ston Kuta Bali Hotel Five Star ontents 05 qua Mini hiller Residential ① ② ③ 5 qua Tempo Super II ① Vanke Estate Rancho Santa Fe Villas ② l Sila'a Emirati Housing Development 8 Villas ③ gile Estate lear ater Bay 9 D 0 0
qua Mini hiller qua Mini hiller qua Mini hiller Midea D Inverter ir-cooled Mini hiller has unitary structure design and hydraulic module is built in the outdoor unit. It is air-cooled water heat pump chiller so there is no need of cooling water tower at the condensing side. D inverter Mini chillers cooling capacity range is from 5 to 8 and it can freely combine with fan coil units and floor heating. These units are designed for residential applications or light coercial applications that require cold or hot water. They are silent and compact units, easy to install and maintain. ll units energy efficiency at part load is + rated. Their high energy efficiency and high reliability ensure low running cost. So they are widely applied in apartments, villas, small business office buildings as well as restaurants, etc. Product Lineup apacity () 5 7 0 6 8 ppearance Power Supply 0-0V/Ph/50Hz 80-5V/Ph/50Hz 08-0V/Ph/60Hz Nomenclature M G - V 6 / D R N Refrigerant type N: R0 Power Supply R: 80-5V/Ph/50Hz None: 0-0V/Ph/50Hz D: D compressor and fan motor Outdoor Unit Nominal ooling apacity () ompressor V: Inverter scroll compressor Design Series ode : Unitary chiller Light oercial hiller System Midea 05 06
qua Mini hiller Features ide application range Nine models with cooling capacities from 5 to 8 and heating capacities from 5.5 to 8.5. Multiple power supply options. + rated energy efficiency at part load The D inverter chiller integrates the latest technological innovations and ensures precise temperature regulation and highly efficient energy usage, making a significant contribution to the limiting the impact on the environment. qua Mini hiller Freely combine with fan coil units and floor coils. Home owners may choose the best types according to their design taste (for interior) or functional needs. D inverter compressor Twin rotary D inverter compressor is used. The output of the outdoor unit can be adjusted precisely according to the energy demanded. way cassette High efficiency D motor: - reative motor core design - High density neodymium magnet - oncentrated type stator - ider operating frequency range eiling & floor Better balance and Extremely Low Vibration: - Twin eccentric cams - balance weights ompact way cassette ompressor (Twin Rotary) structure Highly Stable Moving Parts: - Optimal material matching rollers and vanes - Optimize compressor drive technology - Highly robust bearings - ompact structure Duct D fan motor High efficiency D fan motor saved power up to 50%. ide operation temperature range all mounted Motor speed(rpm) D inverter stepless adjustment inverter multistep adjustment System pressure High performance heat exchanger -5 OOLING MODE 6 Reduce air resistance HETING MODE -5 7-0 -0 0 0 0 0 0 5 0 (D.B.) Outdoor temp. ide range of outlet water temperature The water outlet temperature is -55. New design Original design High efficiency inner-threaded pipe, enhance heat transfer. Hydrophilic fins + inner-threaded pipes The new designed window fins enlarge the heat-exchanging area, decrease the air resistance, save more power and enhance heat exchange performance. Hydrophilic film fins and inner-threaded copper pipes optimize heat exchange efficiency. The specially coated blue fins enhance durability and protect against corrosion from air, water and other corrosive agents, assures a longer coil service life. 07 08
qua Mini hiller dvanced technology D inverter technology, optimally designed fan shape and air discharge grille ensure low sound values. ir deflector Easy control Remote ON/OFF and remote cool/heat functions. qua Mini hiller Grille Powerful Large Propeller Newly Designed Guard EXV is used for stable and accurate gas flow control. Refrigerant inlet High efficiency plate heat exchanger ater outlet Plate heat exchanger uses metal plates to transfer heat between refrigerant and water. The fluids are exposed to a much larger surface area because the fluids spread out over the plates, so both heat transfer efficiency and heat exchanger speed are greatly improved. Multi protections including voltage protection, current protection, anti-freezing protection and water flow protection ensure system ater inlet safety running. Refrigerant outlet High efficiency water pump The water pump used is compliance with Erp directive, which is degrade efficiency standard. Easy installation ompact structure design and leak-tight refrigerant circuit save you much installation labor. The chillers are equipped with a hydronic module integrated into the unit chassis, limiting the installation to straight-forward operations like connection of the power supply, the water supply and the air distribution FUs. The units are equipped with axial fans so they can be installed directly outdoors. ir purge valve ontroller built-in in unit panel used to perform all related operations as the user interface as well as fast diagnosis of possible incidents and their history. ON/OFF & Mode selection Temperature adjust Timer setting Fast diagnosis Optional wired controller for easy operation. Touch key operation LD displays operation parameters Multiple timers Real-time clock Pressure relief valve Plate heat exchanger Hydraulic module ater pump ater pressure differential valve Expansion tank Note: hen the wired controller is connected, the built-in controller is only for display, check and diagnosis functions. 09 0
qua Mini hiller Specifications 0-0V/Ph/50Hz MG-V5/DN MG-V7/DN MG-V0/DN MG-V/DN 0-0//50 80-5V/Ph/50Hz MG-V/DRN MG-V/DRN MG-V6/DRN 80-5/ /50 qua Mini hiller apacity 5.0(.9-5.8) 7.0(.-7.8) 0.0(.9-0.5).(.-.0) apacity.(.-.0).5(.-.0).5(.5-5.5) Rated input.55.6.0.50 Rated input.8.9.68 ooling Rated current 6.8 9.9.0 5. ooling Rated current 5.5 6. 7.7 EER..0.0.0 EER..0.0 SEER..76.89.09 SEER.6.7.8 apacity 5.6 8.0 0.6. apacity.. 5.6 ooling Rated input.5.85.0.65 ooling Rated input.60.0.60 EER.87...60 EER.70.58. apacity 6.(.-7.0) 8.0(.-9.0).0(.-.0).(.-.) apacity.(.-.).8(.5-5.) 6.0(.7-7.0) Heating Rated input.90.5..78 Rated current 8..0.8 6.6 Heating Rated input.7.5.85 Rated current 6. 7.0 8.0 OP.6.5..5 OP..5.0 apacity 6. 8.6.5.0 apacity.0 5. 6.5 Heating Rated input.5.0.65.9 OP.60.0..5 Heating Rated input.85.5.9 OP.56.5. SOP.55.6..6 SOP.66.78.9 Seasonal space heating energy efficiency (ηs) 8.9% 5.% 0.7% 5.% Seasonal space heating energy efficiency (ηs).5% 8.%.6% Seasonal space heating energy efficiency class + + + + Seasonal space heating energy efficiency class + + + Max. input current..7 5 9. Max. input current 8.9 9.6 0. ompressor Rotary ompressor Rotary Outdoor fan Motor type ir flow 5,00 5,00 7,000 7,000 Outdoor fan Motor type D motor ir flow 7,000 7,000 7,000 ir heat exchanger Fin-coil ir heat exchanger Fin-coil Plate heat exchanger Plate ater heat exchanger ater volume L 0.5 0.5 0.7 0.78 ater flow 0.86.0.7.9 ater heat exchanger ater volume L 0.78 0.78.06 ater flow.9.5.9 ater pressure drop 5 5 8 8 ater pressure drop 8 8 9 ater pump Pump head m 5.5 5.5 8.5 8.5 ater volume L/min ater pump Pump head m 8.5 8.5 8.5 ater volume L/min Expansion tank volume L Expansion tank volume L Refrigerant harged volume.5.5.8.8 R0 Refrigerant R0 harged volume.8.9. Throttle type Electronic expansion valve Throttle type Electronic expansion valve Sound power level db() 6 66 68 68 Sound power level db() 68 70 7 Sound pressure level 5 db() 58 58 59 59 Sound pressure level 5 db() 6 6 6 Unit net dimension ( H D) 990 966 5 990 966 5 970,7 00 970,7 00 Unit net dimension ( H D) 970,7 00 Packing dimension ( H D),0,00 5,0,00 5,08,56 5,08,56 5 Packing dimension ( H D),08,56 5 Net/ 8/9 8/9 0/ 0/ Net/ 0/ / / The Max. and Min. wate rinlet pressure 6 500/50 The Max. and Min. water inlet pressure 6 500/50 Pipe connections ater inlet/outlet -/ -/ Pipe connections ater inlet/outlet -/ ontroller Electronic controller (standard), wired controller (optional) ontroller Electronic controller (standard), wired controller (optional) mbient temperature range ooling Heating -5-6 -5-7 mbient temperature range ooling Heating -5-6 -5-7 ater outlet temperature range ooling Heating -0 0-55 ater outlet temperature range ooling Heating -0 0-55 Nominal capacity is based on the following conditions:. ondenser air in 5. Evaporator water in/out /7. ondenser air in 5. Evaporator water in/out /8. Evaporator air in 7 85% R.H., ondenser water in/out 0/5. Evaporator air in 7 85% R.H., ondenser water in/out 0/5 5. t m in open field fan side (sound pressure) 6. The maximum and minimum operating pressure values refer to the activation of the pressure switches 7. The above data test reference standard EN5:0; EN85:0; EN5056:0; EN0:0; (EU)No:8:0; (EU)No:8:0; OJ 0/ 07/0:0 Nominal capacity is based on the following conditions:. ondenser air in 5, Evaporator water in/out /7. ondenser air in 5, Evaporator water in/out /8. Evaporator air in 7 85% R.H., ondenser water in/out 0/5. Evaporator air in 7 85% R.H., ondenser water in/out 0/5 5. t m in open field fan side (sound pressure) 6. The maximum and minimum operating pressure values refer to the activation of the pressure switches 7. The above data test reference standard EN5:0; EN85:0; EN5056:0; EN0:0; (EU)No:8:0; (EU)No:8:0; OJ 0/ 07/0:0
qua Mini hiller 08-0V/Ph/60Hz MG-V0/DVN MG-V8/DVN 08-0//60 kbtu/h 6.0(0.0-7.0) 58.0(.0-6.0) apacity 0.5(.9-0.8) 7.0(.8-8.) ooling Input. 5.60 Unit Dimensions (Unit: ) 5/7 qua Mini hiller EER.9.0 Heating kbtu/h 8.0(.0 -.0) 6.0(.0-65.0) apacity.0(.-.0) 8.5(.0-9.0) Input. 5.78 OP.50.0 96 66 Max. input current ompressor 8.9 9.6 Rotary 6 9 5 90 Outdoor fan Motor type D motor ir flow FM(),0(7,000),0(7,000) ir heat exchanger Fin-coil Plate 995 00 ater heat exchanger ater pump Expansion tank volume Refrigerant Throttle type Sound pressure level ater volume L 0.7.06 ater flow FM().0(.7).7(.9) ater pressure drop 8 Pump head m 8 8 ater volume L/min L R0 harged volume lbs/ 6./.8 7.5/. Electronic expansion valve db() 56 60 0-8 Unit net dimension ( H D) 8-/6 5-/ -/ 970,7 00-9/ 57-/6 7-/8 Packing dimension ( H D),08,56 5 lbs /67 7/7 Net/ 0/ / The Max. and Min. wate rinlet pressure 500/50 Pipe connections ater inlet/outlet -/ 7 600 ontroller Electronic controller (standard), wired controller (optional) mbient temperature range ooling Heating -5-6 -5-7 0 0 60 00 ater outlet temperature range ooling Heating. ooling: hilled water inlet/outlet temperature: /7, outdoor ambient temperature 5 DB.. Heating: arm water inlet/outlet temperature: 0/5, outdoor ambient temperature 7 DB/6 B.. t m in open field fan side (sound pressure).. The maximum and minimum operating pressure values refer to the activation of the pressure switches. -0 0-55 900 970
qua Tempo Super II qua Tempo Super II D Inverter ir-cooled hiller qua Tempo Super II Series The qua Tempo Super II Series is Midea's latest D inverter air-cooled chiller. Its compact design and excellent performance make it suitable for a wide range of applications. There are two models (M-SU0-RNL and M-SU60-RNL) both of which can operate in cooling mode with ambient temperatures of up to 5 and with outlet water temperature as low as 0. The water flow switch and wired controller are both built-in, making installation more convenient. hydraulic module with water pump and expansion tank can be added as a customization option to meet special installation situation requirements. High Efficiency ide pplication Range dvanced Technology Enhanced omfort Easy ontrol Easy Installation and Service 5 6
Nomenclature High Efficiency qua Tempo Super II M - S U 0 - R N L Operating range L: Low ambient temp. cooling ++ rated energy efficiency The qua Tempo Super II Series D inverter air-cooled chillers are compliant with the EU s Energy-Related Products Directive (009/5/E) and both have ++ seasonal space heating energy efficiency ratings. qua Tempo Super II Refrigerant N:R0 Power Supply R: 80-5V/Ph/50Hz Rated cooling capacity () Special function code U: D inverter compressor Series code S: Super II hiller ompressor t the heart of the chiller lies a world-leading D inverter twin rotary compressor. The compressor s innovative design and numerous high performance features reduce power consumption by 5%. Midea Twin rotary structure High efficiency D motor Product lineup Highly stable moving parts Better balance and extremely low vibration M-SU0-RNL M-SU60-RNL D fan motors ppearance speed is controlled according to the system pressure and system load, reducing power consumption by 0%. High -step vector control 80-5V/Ph/50Hz Low 7 8
ide pplication Range qua Tempo Super II High performance heat exchanger Large inner grooved copper tube and hydrophilic aluminum fins greatly improve air side heat exchange efficiency. Flexibility Modular design allows up to 6 units to be connected together, giving a system cooling/heating capacity range of 0 to 960. 60 60 960 Max 6 modules qua Tempo Super II New design, reduces air resistance High efficiency inner grooved tube, enhances heat transfer. Hydrophilic aluminum fins + inner grooved tubes High efficiency plate heat exchanger ompatible with fan coil units and air handling units. ater side heat exchanger uses multiple metal plates to achieve efficient heat transfer between refrigerant and water. Refrigerant inlet all-mounted Ducts ater outlet Floor Standing assettes ir handling units elling & Floor ater inlet Refrigerant outlet Precisely flow control Patented liquid distribution components maximize performance and minimize impact of defrosting operation. 80-step EXV with capillary tube allows stable and accurate gas flow control. Fast response results in higher efficiency and improved reliability. mbient temperature Stable operation even under extreme conditions: -5 to 5. Outlet water temperature ide outlet water temperature range with lowest outlet temperature in cooling mode of 0. 00% 50 5 0 7 75% 50% 0 0 0 0 OOLING MODE 5% 0 0 5 50 0% -0-0 -5 HETING MODE -5 OOLING MODE HETING MODE 9 0
qua Tempo Super II dvanced Technology Duty cycling Duty cycling equalizes the running time of the outdoor units in a multiple-unit system, significantly extending compressor lifespan. Integrated inverter module board Integrated inverter module board combines inverter module, three-phase bridge rectifier, capacitors and thermistors, greatly simplifying wiring connections and current loop and increasing control system stability. apacitors qua Tempo Super II Thermistors IPM Three-phase bridge rectifier 6 Highly-reliable MU 6 Back up In a multi-unit system, if one module fails, the other modules provide backup so that the system can continue operating. Fast, highly-reliable -pin Renesas Electronics MU combines counication and control functions on one chip. Red LED display 6 Red LED display is easy to read even in bright sunshine.
Enhanced omfort Easy ontrol qua Tempo Super II Multiple slient modes Three different silent modes enable noise reduction to suit time of day and ambient noise levels. Easy control Touch key wired controller as standard. qua Tempo Super II Standard mode Silent mode Night silent mode Super silent mode ddtional control Intelligent defrosting technology ON/OFF, ool/heat and larm ports on chiller PBs allow switches to be connected to enable additional remote control functionality. The intelligent defrosting program calculates the time required for defrosting according to the actual system status, eliminating heat losses from unnecessary defrosting. specialized defrosting valve reduces time required for defrosting to as little as four minutes. Heating capacity t min Δt Intelligent defrosting Usual defrosting Time Rapid cooling or heating The D inverter compressor reaches full capacity rapidly, providing quicker cooling or heating with lower levels of temperature fluctuation during the cooling/heating operation. Temp Fluctuation of water oulet temperature Time Note: hen the additional control functionality is added, the ON/OFF control and mode selection functionality of the wired controller is disabled. ooling operation Inverter Non-Inverter
qua Tempo Super II Three user levels Three different user levels ensure users can easily access control functions and allow engineers convenient access to operating parameters. User Project Service Easy Installation and Service Built-in hydraulic module (customization option) Option: Built-in water circulating pump qua Tempo Super II Modbus gateway (customization option) Modbus gateway functionality can be added by adding X, Y, E ports to the wired controller. Up to 6 wired controllers can be connected together, with each controller controlling up to 6 units. Option: Up to 6 (P Q E) Up to 6 units Built-in water circulating pump and 00L expansion tank Modbus gateway (X Y E) Modbus gateway (X Y E) (P Q E) Up to 6 units Notes:. Option pump head 9m on M-SU0-RNL and 5m on M-SU60-RNL.. Option is only available on M-SU0-RNL. Built in water flow switch omputer Built-in water flow switch reduces installation time and reduces costs. Lonorks gateway (customization option) LSQ-LONORKS Up to 6 units Built-in wired controller Built-in wired controller in the electric control box saves installtion space and time. Lonorks network RS85(P Q E) BMS system Lonorks gateway acts as an interface to a building management system. KJRM-0H/BMKO-E 5 6
qua Tempo Super II B Top view Heating G 7 55 Input power 0.8.0 EER.50.50 SEER..0 apacity 6 Input power 0.5 0. OP.95.00 SOP.0.85 ompressors H F ++ Max. running current Hole for anchor bolt Φ5 ir side heat exchanger E D Front view motor type motor quantity ir flow rate m/h M-SU60-RNL ater side heat exchanger B Refrigerant system Left view G Rotary Finned tube Finned tube D motor D motor,500,000 Plate Plate. 5.7 9.8 ater flow m/h 5 ater pressure drop 60 80 R0 R0 Refrigerant charge 0.5 EXV 7.0 EXV + apillary Sound power level db() 75.9 db() 65.8 7. Net dimensions ( H D) 870 75 000 0 5 055 Packed dimensions ( H D) 90 5 05 50 70 090 Net/ 00/0 80/90 ater inlet/outlet ontroller ater outlet temperature range 85. DN0 DN50 ired controller ired controller ooling -5 to 5-5 to 5 Heating -5 to 0-5 to 0 H Operating temperature range F Rotary Sound pressure level Pipe connections ooling 0 to 0 0 to 0 Heating 5 to 55 5 to 55 E Hole for anchor bolt Φ5 6.8 L Throttle type Top view ++ 8.0 Volume Refrigerant type Front view 80-5//50 Seasonal space heating energy efficiency class Bottom view M-SU60-RNL 80-5//50 apacity ooling Left view M-SU0-RNL Bottom view D Front view B D E F G H M-SU0-RNL 870 000 75 0 00 70 788 880 M-SU60-RNL 0 055 5 0 70 05 958 7 Note:. ooling: hilled water inlet/outlet temp./7 ; outdoor ambient temp. 5 DB.. Heating: arm water inlet/outlet temp. 0/5 ; outdoor ambient temp. 7 DB/6 B.. Sound pressure level is measured at a position m in front of the unit and.m above the floor in a semi-anechoic chamber.. ith water outlet temperatures lower than 5 antifreeze must be added. 5. apacity and efficiency data calculated in accordance with EN5. 8 qua Tempo Super II M-SU0-RNL
D Midea D operate in high efficiency and low sound level due to the D brushless fan motor. Nomenclature M K T - V 00 It contains cassette units, ceiling & floor units with or without cabinet, wall-mounted units and duct units. The air volume ranges from 50FM to 500FM. It is a highly versatile product suitable for hospitals, office buildings, hotels, airports and various other applications. Nominal ir Volume (FM) D Series ode hilled oil Unit 9 0 Midea
dvantage of with D Brushless Motor Quiet Operation Unit noise is -5dB() lower compared to an motor fan coil unit, creating a quiet living environment. Quiet The D fan coil units are the new energy saving products improved with advanced D driven technology. The D fan coil units have advanced technology of high energy efficiency, low noise operation and precision temperature control, so are ideal for hospitals, office building, hotels, airports and various other applications. onstant Level of ir Temperature and Humidity The D Inverter fan motor adjusts of air flow based on thermal load instantly providing less temperature fluctuation and an improved living environment. Temp Fluctuation of room temperature D driven motor Energy Efficiency, omply with E Regulation Time The power consumption of D driven fan coil units can be reduced up to 0% in comparison to corresponding type. D driven FU driven FU Power input: 00 50 Motor Versatile Selection Midea D contain cassette units, ceiling & floor units with or without cabinet, wall-mounted units and duct units. The air volume ranges from 50FM to 500FM. It is a highly versatile product suitable for hospitals, office buildings, hotels, airports and various other applications. 00 50 0 00 00 00 500 600 800 000 00 ir Flow: FM assette unit all-mounted unit Duct unit D and motor s power contrast eiling & floor unit with cabinet eiling & floor unit with cabinet eiling & floor unit without cabinet
Product Lineup -Pipe FUs ir volume (FM) 50 00 50 00 00 50 500 600 750 800 850 900 950 000 00 500 -way cassette ompact -way cassette Duct all mounted eiling & floor -Pipe FUs ir volume (FM) 00 00 00 500 600 750 800 850 950 000 00 500 -way cassette ompact -way cassette Note: The standard power supply for all fan coil units is 0V-0V/50Hz; 08-0V/60Hz can be customized for some series fan coil units. For further information, please contact with our salesmen.
assette Series -Pipe -ay assette -pipe Various Selections -way assette Versions for / pipe system. Versions for compact/normal size. -pipe Stylish Panel with Large irflow Outlet -way air supply panel is standard for -way cassette. 60 air supply panel is standard for compact -way cassette. ompact Design, Easy Installation ompact -way assette -pipe -way panel -pipe 60 panel 575 ir flow (H/M/L) ooling Heating Heating Sound pressure level (H/M/L) motor oil Max. orking pressure Net dimensions ( H D) Packing size ( H D) Panel Net dimensions ( H D) Packing size ( H D) Body ater inlet/outlet pipe Pipe connections FM db() MPa MK-V600R 75/987/768 69/580/5 5.9/5./..06/0.9/0.77 9./5./ /7/7 6.06/6.5/5..0/./. 5.9/0./9.9 /8/7 8./7.7/6.06.06/0.9/0.77 6.9/.7/8.6 /8/7 /9/.6 950 5 950 05 90 05 6 9 80 0 80 900 60 900 8 ODΦ MK-V750R 0-0//50 9/00/80 7/600/76 6./5.5/.6.0/0.96/0.8././. 9//0 6.7/6.5/5..9/.0/.00 0/.7/6. //9 8.6/7.9/6.7.0/0.96/0.8 9./.8/0.6 9//9 /0/ entrifugal, forward-curved Blades.6 950 5 950 05 90 05 6 9 80 0 80 900 60 900 8 ODΦ MK-V850R 5/6/0 85/67/595 7.5/6.6/5.89.7/.8/.07 0./5./.6 68/7/0 7.88/7.8/6.76.66/.9/.5 6.7/8.8/5.6 66/7/8 0.7/8.7/7.88.7/.8/.07 8./.6/. 67/7/8 5/0/7.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 7 ODΦ For ompact Four-way assette: Extremely compact casing suits any room's decor and requires little space for installation on a low ceiling. Due to compact body and light weight, all models can be installed without a hoist. High Efficiency and Low Sound Operation Thanks to the D brushless fan motor, the unit operates in high efficiency and low sound level. High-lift Drain Pump Standard built-in drain pump with 750 pump head for normal size and 500 for compact size. Fresh ir Intake 575 Various ccessories Selections 6 Safe factory-installed electric heater is optional. Extended drainage pan for better ceiling protection is optional. 750 ir flow (H/M/L) ooling Heating Heating Sound pressure level (H/M/L) motor oil Max. orking pressure Net dimensions ( H D) Packing size ( H D) Panel Net dimensions ( H D) Packing size ( H D) Body ater inlet/outlet pipe Pipe connections FM db() MPa MK-V950R 50//0 900/70/67 7.8/6.8/6.5././. /7/. 75// 8.9/8/7.5.7/.5/. 8./0.7/7. 76// 0.86/9./8.9././. 9.9/5./.6 76// 6//9.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 7 ODΦ MK-V00R 0-0//50 58/7/6 90/806/77 7.87/7./6.67./.8/../8./6. 85/59/5 9.6/8.5/7.9.7/.57/.6 8.8//0.7 86/59/5 0.9/9.8/9.6./.8/. 0/6./.7 85/58/5 8// entrifugal, forward-curved Blades.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 7 ODΦ MK-V500R 87/5/98 00/8/70.9/8.8/7.8.96/.5/.8 6.6/.7/6. 6/58/9 0.07/0.08/8.68.5/.86/.59 9././. 8/58/8.9/.7/0.07.96/.5/.8././5 7/58/9 9//9.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 9.5.5 ODΦ Fresh air can enter through the cassette unit so you can enjoy even fresher air in a room. Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling) 5 6
-Pipe -ay assette -Pipe ompact -ay assette ir flow (H/M/L) ooling Heating Heating Sound pressure level motor oil Panel Body Pipe connections (H/M/L) Max. working pressure Net dimensions ( H D) Packing size ( H D) Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM db() MPa MK-V600F 87/08/85 757/67/500 5.6/.8/ 0.99/0.87/0.7.8/.5/8. 50//9 7.8/6.06/5.09 0.6/0.55/0.7 5./0.5/.5 5//9 7.66/6.88/5.8 0.69/0.6/0.5 7./6./9. 50//9 /7/.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 7.5.5 ODΦ MK-V750F 0-0//50 89/9/99 87/675/56 5.6/5/.6.0/0.9/0.77 5.9/./9 60/8/ 7.66/6.5/5. 0.65/0.58/0.50 /5.7/9. 6/8/ 8.5/7.9/6.7 0.7/0.66/0.56 9.5/.5/.8 6/9/ /9/ entrifugal, forward-curved Blades.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 7.5.5 old water: ; Hot water: R/ ODΦ MK-V850F //008 89/67/59 5.6/.88/.5 0.99/0.95/0.80 6/./0. 68/8/9 8.5/6.9/5.76 0.67/0.58/0.5.6/.7/. 68/7/8 8./7.7/6.57 0.78/0.66/0.6.6/.5/6.8 69/8/8 5/9/6.6 950 5 950 05 90 05 6 9 80 00 80 900 0 900 7.5.5 ODΦ ir flow (H/M/L) ooling Heating Heating Sound pressure level (H/M/L) motor oil Panel Body Pipe connections Max. working pressure Net dimensions ( H D) Packing size ( H D) Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe -Pipe ompact -ay assette FM db() MPa MKD-V00 55/9/ /5/89.98/.5/ 0.5/0.5/0.5 0/7/5 5/9/5.6/.89/. 0.6/0.5/0../8.5/5. 5/9/5.0/.5/.6 0.5/0.5/0.5 8./6/.8 /9/5 9//7.6 67 50 67 75 75.5.5 575 6 575 670 90 670 6.5.5 G/ ODΦ5 MKD-V00 0-0//50 79/56/8 /0/6.96/.6/.76 0.7/0.58/0.5.8/8./6.5 8/5/9.6/.79/. 0.8/0.67/0.56 9./8.6/6 8/6/0 5././.57 0.7/0.58/0.5.68/6./.9 8/6/0 /6/0 entrifugal, forward-curved Blades.6 67 50 67 75 75.5.5 575 6 575 670 90 670 6.5.5 G/ ODΦ5 MKD-V500 78/6/9 59/59/90./.8/.0 0.75/0.6/0.5./8.6/7. /8/.95/.99/.6 0.87/0.70/0.58 9./8./6. /8/ 5.76/.69/.8 0.75/0.6/0.5./6.5/5. /8/ /8/.6 67 50 67 75 75.5.5 575 6 575 670 90 670 6.5.5 G/ ODΦ5 ir flow (H/M/L) ooling Heating Heating Sound pressure level motor (H/M/L) FM db() MK-V950F 55//088 897/7/60 5.8/5.07/.75.0/0.9/0.8 6./.6/0.9 77// 8.5/6.6/5.9 0.68/0.59/0.55 /6.6/.5 76// 8.7/7./6.76 0.78/0.67/0.6.8/.5/9. 76// 6//8 MK-V00F 0-0//50 785/55/97 050/908/8 8.75/7.97/7..57/./..9/0/ 07/7/5.7/9.88/9.7 0.96/0.89/0.8./6.6/.6 07/7/55.9/./0.5.0/.00/0.95 5./.9/0.6 07/7/55 8// MK-V500F 857/0/9 09/89/700 8.76/7.9/6.5.58/.0/.5 /.6/7.7 5/58/8.9/9.7/8. 0.99/0.8/0.76 8.7/.5/7 6/58/8.7/0.5/9.5./0.96/0.87 6./5.7/8. 6/58/8 9//8 Sound pressure level (H/M/L) entrifugal, forward-curved Blades oil pressure Max. working MPa.6.6.6 oil Max. working pressure MPa.6.6.6 Net dimensions ( H D) 67 50 67 67 50 67 67 50 67 Panel Net dimensions ( H D) 950 5 950 950 5 950 950 5 950 Packing size ( H D) 75 75 75 75 75 75 Packing size ( H D) 05 90 05 05 90 05 05 90 05 Panel.5.5.5 6 6 6.5.5.5 9 9 9 Net dimensions ( H D) 575 6 575 575 6 575 575 6 575 Body Net dimensions ( H D) 80 00 80 80 00 80 80 00 80 Packing size ( H D) 670 90 670 670 90 670 670 90 670 Packing size ( H D) 900 07 900 900 0 900 900 0 900 Body 6.7 6.7 6.7 7.5 0 0.7.7.7 pipe old water: water: G/ ater inlet/outlet pipe old water: ; Hot water: R/ Pipe connections Pipe connections ODΦ5 ODΦ5 ODΦ ODΦ ODΦ. 5 5 ater inlet/outlet G/; Hot ODΦ5 Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 65/55, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling). (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 70/60, high fan speed. 7 8 ir flow (H/M/L) ooling Heating Heating motor FM db() MKD-V00F 56/9/ 5/5/88./.08/.65 0./0.6/0.9 7./.5/9. /9/5./.86/.5 0./0.7/0..5/7./. 5/9/5.85/.5/.55 0.6/0.0/0. 9.8/.7/. 5/9/5 9//7 MKD-V00F 0-0//50 77/569/5 7//65.08/.6/.8 0.56/0.8/0..5/9./7 7//9 5.5/.5/.98 0.6/0./0.7./7.9/. 8/6/0.78/.0/. 0./0.6/0. 0.6/.7/6.68 9/6/0 /5/0 entrifugal, forward-curved Blades MKD-V500F 7/57/6 0/6/7.05/.6/. 0.5/0.7/0.0 6.8/./0. /7/ 5.97/.66/.09 0.9/0./0.8 6.8/9./.5 /6/0.9/./.5 0.6/0.8/0. 6./5.9/9 /7/0 /9/
Duct Series -Pipe - Duct Various Selections Versions for normal/high temperature different systems., or row coils for -pipe system, and row coils for -pipe system. Large range of available static pressure. Flexible Installation -Pipe Duct High Efficiency and Low Sound Operation Due to the D brushless fan motor, the unit operates in high efficiency and low sound level. ir flow (H/M/L) FM Standard external static pressure Pa ooling Heating Heating Sound pressure level 0Pa (H/M/L) db() motor oil Max. working pressure MPa Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe MKT-V00 MKT-V00 MKT-V00 0-0//50 MKT-V500 9/95/ 58/7/0 65/9/0 6/58/8 79/6/ 65/65/ 887/60/ 5/6/60 Pa (default); 0/50Pa can be set through dial switch on PB.0/.5/.7 0.7/0.8/0. 6./.6/.7 8/9/6.57/.89/.7 0.7/0./0.7 5.6/.5/.9 9/9/7.98/./.7 0.7/0.8/0. 7.9/.5/. 9/9/7 7.5/7./.0.8/./.79 0.5/0./0..6/0.5/7. //7.56/.8/.08 0.6/0.50/0.7 0.5/0./6. //7./.6/.9 0.5/0./0. 5.9/7./.8 //7 0././6.7./.78/. 0.59/0.50/0.8 9.7/.79/9.57 9/6/9.9/./.9 0.7/0.6/0.5 6.0/6.6/0 /7/9.9/./.0 0.59/0.50/0.8 /.09/7.8 /8/9./.7/6.8.8/.6/.55 0.68/0.56/0.6.7/7./.9 /0/.8/.9/.0 0.8/0.69/0.5 9.90/0.89/.86 5// 5.6/.9/.5 0.68/0.56/0.6 9.0/.6/9.7 5//.6/6.8/9. entrifugal, forward-curved Blades.6 Φ9.5 7 5 790 60 550 6.5 9.6 Φ9.5 8 5 890 60 550 8.5..6 Φ9.5 9 5 990 60 550 0..6 Φ9.5 9 5 990 60 550 0. Left and right hand piping connections are optional, flexible installation. Left hand Front discharge Right hand Standard Return ir Plenum and Filter Standard return air plenum and filter guarantees clean air supply and stable air flow rate. Fresh ir Intake Fresh air can enter through the duct unit so you can enjoy even fresher air in the room. ir flow (H/M/L) Standard external static pressure ooling Heating Heating Sound pressure level 0Pa (H/M/L) motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM Pa db() MPa MKT-V600 MKT-V800 MKT-V000 MKT-V00 0-0//50 08/8/586 65/8/ 9/07/797 877/60/68 8//906 07/78/5 7/669/5 68/98/667 Pa (default); 0/50Pa can be set through dial switch on PB.78/.0/.09 0.85/0.69/0.5./9.8/6. 5/5/ 6.5/5.7/.0.0/0.9/0.7.6/./8.9 58/7/ 7.9/5.9/.55 0.85/0.69/0.5 9.88/8.56/5. 58/7/ 6./8.9/9.9 6.7/5.9/.5.9/0.96/0.80 5./0.89/7.8 6/8/6 8.9/6.6/5..6/.7/0.9.6/./8.8 66/0/6 9.87/7.8/6.9.9/0.96/0.80 9.6/9.0/6. 66/0/7 7.7/9./. 7.9/6.6/5.5./.7/0.9./6./0.9 9//9 9.9/7.9/5.86.69/.8/.0 9.7/8.87/.07 00//9.6/9.7/6.96./.7/0.9 6.68/.96/9. 99/5/9 50./.0/.0 9.8/8.5/6.6.7/./. 50./0./.7 /5/.58/0./7.57.7/.79/. 8.0/.8/6.5 8/55/.58/.8/8.8.7/./. 60.7/6.5/7.8 9/55/ 50.9/.0/.8 entrifugal, forward-curved Blades.6 Φ9.5 6 5 0 60 550. 6.6 Φ9.5 6 5 50 60 550. 5.8.6 Φ9.5 566 5 65 60 550.5 7..6 Φ9.5 856 5 905 60 550 7.5.8 Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling) 9 0
-Pipe - Duct -Pipe - Duct ir flow (H/M/L) Standard external static pressure ooling Heating Heating Sound pressure level 0Pa (H/M/L) motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM Pa db() MPa MKT-V00 MKT-V00 MKT-V00 MKT-V500 0-0//50 /7/05 /60/0 596// 50/60/8 7/56/89 //8 865/66/ 508/68/59 Pa (default); 0/50Pa can be set through dial switch on PB.5/.7/. 0./0./0.5.6/8.6/6. 7/9/6.68/.99/. 0.9/0.5/0.6.6/7.6/.9 8/9/6.7/.7/.75 0./0./0.5 0./6./. 8/9/7 8./8./../.7/. 0.6/0.8/0.7.8/6./. 0//7.8/.08/.8 0.67/0.5/0. 5/7.6/. //8.5/.6/.7 0.60/0.8/0.7 9./.9/8.5 //8 6./9.5/0.7.99/.6/.5 0.69/0.57/0. /9./5.8 6/5/9.7/.85/.77 0.8/0.67/0.50 /0.5/6. 6/6/9 5.5/.55/.7 0.69/0.57/0. 0.8/7.7/.8 8/6/9 8././.0.6/.59/.8 0.79/0.6/0.50 6././7.6 9/9/ 5.7/./. 0.9/0.7/0.57 8././8. // 6.6/.99/.8 0.79/0.6/0.50.7/9.5/6. //./6./7.9 entrifugal, forward-curved Blades.6 Φ9.5 7 5 790 60 550 6.7 9.7.6 Φ9.5 8 5 890 60 550 9.6 Φ9.5 9 5 990 60 550.6 Φ9.5 9 5 990 60 550 ir flow (H/M/L) Standard external static pressure ooling Heating Heating Sound pressure level 0Pa (H/M/L) motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM Pa db() MPa MKT-V00 MKT-V00 MKT-V00 0-0//50 MKT-V500 /97/7 59/7/ 67/68/8 68/75/98 778/607/07 57/57/9 88/6/6 50/77/7 Pa (default); 0/50Pa can be set through dial switch on PB./.59/. 0.0/0.0/0../.5/ 7/9/6.8//.5 0.5/0.7/0.9 /.76/. 8/9/7././.75 0.0/0.0/0..99/./0.7 9/9/6 7./7./..9/.58/.87 0.57/0.7/0. 5./.6/.6 //7.88/.09/.5 0.67/0.56/0../.9/.8 //8.5/.6/.68 0.57/0.7/0. 5.85/./.9 //8 9.6/.5/5.0.06/.6/. 0.7/0.59/0. 8./5.9/.9 9/6/9.8/.9/.88 0.8/0.68/0.5 6.99/6./.8 /8/0 5.6/.59/.6 0.7/0.59/0. 9./.9/.8 /8/0./.5/6..6/.56/.78 0.80/0.6/0.50.6/8./5.6 8/9/ 5././. 0.96/0.76/0.57 0.6/9.8/6.68 // 6.5/.88/.7 0.80/0.6/0.50.06/7.6/5.5 //.8/7./9.8 entrifugal, forward-curved Blades.6 Φ9.5 7 5 790 60 550 7.8 0..6 Φ9.5 8 5 890 60 550 0.9.6 Φ9.5 9 5 990 60 550.9 5..6 Φ9.5 9 5 990 60 550.9 5. ir flow (H/M/L) Standard external static pressure ooling Heating Heating Sound pressure level 0Pa (H/M/L) motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM Pa db() MPa MKT-V600 MKT-V800 MKT-V000 MKT-V00 0-0//50 0/760/5 60/7/0 5/08/78 85/60/59 8//906 07/78/5 /58/08 55/90/67 Pa (default); 0/50Pa can be set through dial switch on PB 5.85/.8/.78.05/0.85/0.65.//. 9// 6.6/5.8/.5/0.9/0.7.7/./.6 5/6/ 7.8/6.5/.8.05/0.85/0.65 6./8./. 5/5/ 6./9.0/0. 8.0/6.6/5.08././0.89.6/0.5/.9 60/8/6 9.5/7.08/5.58.59/.6/0.98.9/.6/.9 65/0/7 0.88/8.6/6.68././0.89 6./6.9/.5 65/0/7.9/6./7.7 8.96/7.7/5.66.59/.9/0.98./6.9/0.8 96//9 0.7/8.55/6.5.88/.5/. 8./9./ 00/5/0.6/0.0/7.5.59/.9/0.98./.8/9.5 99//9 7.8/0.7/0.7 0.79/8.86/6.79.9/.57/.0 6./8.8/.8 06/9/.6/0.5/7.7./.78/. 9./0/.9 5/5/.9/.9/8.89.9/.57/.0.6/6/0. /5/ 8.9/.8/.7 entrifugal, forward-curved Blades.6 Φ9.5 6 5 0 60 550.7 7..6 Φ9.5 6 5 50 60 550 7..6 Φ9.5 566 5 65 60 550.7 9..6 Φ9.5 856 5 905 60 550 9.. ir flow (H/M/L) Standard external static pressure ooling Heating Heating Sound pressure level 0Pa (H/M/L) motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM Pa db() MPa MKT-V600 MKT-V800 MKT-V000 MKT-V00 0-0//50 056/79/575 6/66/8 506/08/8 885/67/8 8//9 066/788/58 /67/9 55/95/658 Pa (default); 0/50Pa can be set through dial switch on PB 5.87/.78/.68.06/0.86/0.65 9./.6/8.5 5/5/ 6.7/5.8/.9./0.90/0.67 6./.6/7. 56/7/ 7.7/6.9/.68.06/0.86/0.65 7.9/./7 56/7/ 6./9./0.7 6.65/5.0/.6.9/0.88/0.6 8.8/5.09/.8 6/7/6 8.6/6./.77././0.86 7.7/6.97/. 66/0/6 9.55/7./5..9/0.88/0.6 0.9/.9/.5 67/9/6 7./9./. 7.98/6.9/.7.7/./0.78.8/8.6/.75 9//8 9.89/7.79/5.67.68/.5/.00.06/0.7/6. 0/6/0.55/9/6.6.7/./0.78 5./7.5/. 0/6/0 50./.7/. 9.76/7.8/5.7.78/./.0./5/8.98 09/50/.76/9./6.76.0/.60/.5 0.0/6.9/9.6 9/55/././8..78/./.0.9/.6/.8 /5/ 50.7/.8/.5 entrifugal, forward-curved Blades.6 Φ9.5 6 5 0 60 550 5 8.8.6 Φ9.5 6 5 50 60 550.8 9..6 Φ9.5 566 5 65 60 550 6..9.6 Φ9.5 856 5 905 60 550.9 7. Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling) Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling)
all Mounted Series all Mounted (S ) S Stylish Panel Stylish front panel blends easily within any interior décor, ideal for use in shops, restaurants or offices with no or narrow false ceilings. High Efficiency and Low Sound Operation Due to the D brushless fan motor, the unit operates in high efficiency and low sound level. onvenient Installation Multi-directional outlet pipe feature: left\right\rear, to meet the needs of different rooms. Rear Left Right Built-In -ay Electromagnetic Valve ir flow (H/M/L) ooling Heating Heating Sound pressure level (H/M/L) motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) ater inlet/outlet pipe FM db() MPa MKG-V50B 9/5/00 89/67/5.7/.59/.9 0.8/0.6/0..6/8.6/5.6 //0.9/.8/.58 0.5/0.9/0.6.66/.89/0. //9.9/.0/.6 0.8/0.6/0. 7.9/0.5/6.5 /0/8 /0/7 Tangential fan.6 95 90 0 00 90 5.7 7. G/ ODΦ0 MKG-V00B 585/85/ /85/.9/.5/.9 0.5/0.5/0.8 7./9.7/.6 5//9./.77/. 0.56/0.9/0../.5/5. /0/8.76/./.77 0.5/0.5/0.8 0.6/7.0/0.98 /0/8 /7/ Tangential fan.6 95 90 0 00 90 5.7 7.6 G/ ODΦ0 MKG-V00B 0-0//50 85/689/590 85/05/7.8/./.88 0.67/0.57/0.5 56.75/./.0 //5./.65/.09 0.7/0.6/0.56 5.86/7.5/5.69 /0/ 5.08/./.77 0.67/0.57/0.5 6.9/7.88/0. /0/ 5/9/5 Tangential fan.6 95 90 0 00 90 5.7 6. G/ ODΦ0 MKG-V500B 86/7/6 507/5/7.7/.98/.8 0.77/0.68/0.6.7/.5/7.05 6/8/.8/./.6 0.8/0.7/0.6 6.8/.8/6.6 /6/ 5.68/.9/. 0.77/0.68/0.6.7/9.69/.98 /6/ 8//0 Tangential fan.6 07 5 0 80 5 5 5. 9 G/ ODΦ0 MKG-V600B 979/89/77 575/99/.87/.6/.79 0.85/0.7/0.65 50.68/9.7/.66 8/6/8 5.6/.68/.96 0.89/0.80/0.68 7./.75/.95 //6 6./5.57/.77 0.85/0.7/0.65 5.65/6./0. //6 /0/5 Tangential fan.6 07 5 0 80 5 5.9 8.6 G/ ODΦ0 Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling) uto Swing Louver The uto Swing Louver function ensures that the air direction corresponds to the mode selected. Easy Maintenance Removable front panel making maintenance convenient. Step Swing Open panel
eiling & Floor Series eiling & Floor oncealed H Series Exposed (air return from side) H Series High Efficiency and Low Sound Operation Due to the D brushless fan motor, the unit operates in high efficiency and low sound level. Flexible Installation abinet and concealed versions meet various installation requirements. Horizontal or vertical installation. Exposed (air return from bottom) H5 Series ir flow (H/M/L) External static pressure ooling Heating Heating Sound pressure level motor oil Body (H series) Body (H/H5 series) ater inlet/outlet pipe H/M/L Max. working pressure Net dimensions ( H D) Packing size ( H D) Net dimensions ( H D) Packing size ( H D) FM Pa db() MPa MKH-V50 MKH-V50 MKH5-V50 67/0/5 57/8/90.6/./0.96 0.8/0./0.8 7.9/.8/. /8/6.7/.9/0.98 0.0/0./0.8 5./.5/.0 /9/7.0/.5/. 0.8/0./0.8 5.9/.9/.88 /9/7 5/8/.6 Φ9.5 550 55 69 69 05 7 9 800 59 0 889 68. 8. G/ ODΦ6 MKH-V50 MKH-V50 MKH5-V50 69/7/96 7/60/5.07/.5/.07 0.6/0.7/0.0./6.7/.8 7/0/7.9/.76/. 0./0./0. 8.9/7.9/. 8//7.78/.07/. 0.6/0.7/0.0.99/5./ 8//7 9//.6 Φ9.5 550 55 69 69 05 7 9 800 59 0 889 68. 8. G/ ODΦ6 0-0//50 MKH-V00 MKH-V00 MKH5-V00 560/07/9 9/9/87.97/.9/.8 0.5/0./0. 9./.79/8.5 6//9./.5/.87 0.57/0.6/0.5 5.6/./7.6 6//0.9/.08/. 0.5/0./0. 9./0.57/6.7 6//0 /7/.6 Φ9.5 750 55 89 69 05 0.5 000 59 0 089 68 8.. G/ ODΦ6 H models: ; H/H5 models: 0 entrifugal, forward-curved Blades MKH-V00 MKH-V00 MKH5-V00 60/8/ 55/6/0.5/.6/. 0.59/0.9/0.8./6.8/. 0/6/0.6/.8/.7 0.6/0.5/0.9 9.57/5./9.8 0/6/0.7/./.6 0.59/0.9/0.8.9/.86/9. 0/5/9 /7/.6 Φ9.5 750 55 89 69 05 0.5 000 59 0 089 68 8.. G/ ODΦ6 Floor installation eiling installation Flexible ir Return ir return can be from side or bottom. ir flow (H/M/L) External static pressure ooling Heating Heating Sound pressure level H/M/L motor oil Max. working pressure Net dimensions ( H D) Packing size ( H D) Body (H series) Net dimensions ( H D) Packing size ( H D) Body (H/H5 series) ater inlet/outlet pipe FM Pa db() MPa MKH-V50 MKH-V50 MKH5-V50 678/9/8 98/89/5.57/.5/.6 0.8/0.60/0.7 5.5/5.0/9.95 5//9.66/.8/.57 0.8/0.60/0.7.58/.5/7.9 5//9 5.5/.98/.0 0.8/0.60/0.7.0/./7.7 5//9 0//5.6 Φ9.5 950 55 09 69 05 5 9 00 59 0 89 68. 9.7 G/ ODΦ6 MKH-V500 MKH-V500 MKH5-V500 78/555/98 0/6/.8/.7/.8 0.85/0.65/0.5 7./7./0.7 /6/0 5./.9/.88 0.9/0.70/0.5.5/6.9/9.5 /6/0 6.7/.65/. 0.85/0.65/0.5 7.6/./9 /6/0 /5/7.6 Φ9.5 950 55 09 69 05 5 9 00 59 0 89 68. 9.7 G/ ODΦ6 MKH-V600 MKH-V600 MKH5-V600 0-0//50 07/70/588 598//5 5././.58 0.9/0.78/0.6 8.5/.0/8.7 7/8/ 6.8/.8/.9.0/0.87/0.7 7.6/5.9/0.7 8/8/ 7./5.69/.7 0.9/0.78/0.6.6/.5/8.5 8/8/ //8.6 Φ9.5 50 55 9 69 05 6 500 59 0 589 68 0 5.5 G/ ODΦ6 H models: ; H/H5 models: 0 entrifugal, forward-curved Blades MKH-V800 MKH-V800 MKH5-V800 5/906/675 7/5/97 6.5/5./.05./0.89/0.7 6.5/7.08/.9 67/0/5 7.8/5.8/.6.0/.0/0.8 /0.5/.5 69/0/6 8.79/6.89/5.5./0.89/0.7.7/5.6/0.56 68/0/6 8/9/.6 Φ9.5 50 55 9 69 05 6 500 59 0 589 68 0 5.5 G/ ODΦ6 MKH-V900 MKH-V900 MKH5-V900 509/05/806 887/60/7 7.7/5.67/.7.9/0.99/0.8 0.9/8.96/.0 0/8/ 8.5/6./5.05.7/./0.90 7.9/.6/. 06/8/ 9.96/7.8/5.9.9/0.99/0.8.9/6.7/.8 06/8/0 5//5.6 Φ9.5 50 55 9 69 05 6 500 59 0 589 68 0 5.5 G/ ODΦ6 Based on Eurovent conditions: H:High fan speed; M: Medium fan speed; L: Low fan speed. :ooling mode ( and -pipe coil): entering air temperature 7 DB/9 B, entering/leaving water temperature 7 /, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, entering/leaving water temperature 5/0, high fan speed. :Heating mode : (-pipe coil): entering air temperature 0 DB, enter water teperaure/water flow 50 /*(same water flow as in standard rating condition in cooling) 5 6
Dimensions -way cassette -pipe -way cassette Dimensions (unit:) Tubing side Drain side ompact -way cassette -pipe compact -way cassette Dimensions (unit: ) Drain side Tubing side 5(Hook-location) 575(Body) 67(Panel) 6 90 680(Hook-location) 80(Body) 950(Panel) B D 55(Hook-location) 780(Hook-location) 80(Body) 950(Panel) Size MK-V600R MK-V750R MK-V950R MK-V00R MK-V500R B D 0 70 5 85 00 90 5 95 575(Body) 67(Panel) -pipe compact -way cassette Dimensions (unit: ) -Pipe -way cassette Dimensions (unit:) Drain side Tubing side Tubing side Drain side 680(Hook-location) 80(Body) 950(Panel) 90 00 0 50 60 0 5(Hook-location) 575(Body) 67(Panel) 6 90 0 57 55(Hook-location) 575(Body) 780(Hook-location) 80(Body) 950(Panel) Service Spaces (unit:) 67(Panel) Service Spaces (unit: ) ater pipe joint joint ater pipe joint joint joint ater pipe joint joint ater pipe joint >000 >000 0 >0 >000 >000 >00 >00 >000 >000 eiling >500 Ground Outlet Inlet Outlet 880 (ceiling hole) -pipe -way cassette Panel eiling 000~500 Ground Outlet Inlet Outlet 880 (ceiling hole) -pipe -way cassette >000 >000 eiling 00~800 Outlet Inlet 600 (ceiling hole) Outlet Ground -pipe compact -way cassette Panel eiling 00~800 Outlet Inlet Outlet Panel 600 (ceiling hole) -pipe compact -way cassette 7 8
Height of the front panel (continued: duct units dimensions) Size B D E F H () 00FM 55 85 5 85 7 58 00FM 65 585 6 585 8 68 -way cassette 5 00FM 75 685 7 685 9 78 H ompact -way cassette 50 500FM 600FM 75 965 685 905 7 9 685 905 9 6 78 00 800FM 65 05 05 6 0 all mounted - S type Dimensions (unit: ) 75 5 Size MKG-V50-B MKG-V00-B MKG-V00-B MKG-V500-B MKG-V600-B 000FM 00FM eiling & Floor Dimensions (unit: ) oncealed type 70 660 0 600 8 68 0 600 566 856 08 698 B 6 8 60 8 0 B 7 95 89 07 55 55 D 90 5 all mounted - type Dimensions (unit: ) 90 8 90 0 60 D Size 66 MKG-V50 MKG-V00 MKG-V00 95 8 MKG-V500 MKG-V600 070 MKF D B 6 5 6 9 0 9 MKH 05 78 () B() () D() MKH-V50/50 550 56 500 5 MKH-V00/00 750 76 700 7 MKH-V50/500 950 96 900 9 MKH-V600~900 50 6 00 D 69 8 B 90 75 5 885 66 65 D 670 85 Exposed type Duct Dimensions (unit: ) F B (ir return) 80 80 80 80 59 0 B 59 0 6 05 () B() MKH-V50/50 MKH5-V50/50 800 58 MKH-V00/00 MKH5-V00/00 000 78 MKH-V50/500 MKH5-V50/500 00 98 MKH-V600~900 MKH5-V600~900 500 8 6 Drain port Terminal box 6-0 6 hanger slots D E 56 70 50 70 5 58 8 0 -pipe duct water inlet ater outlet ir release valve 0 58 8 Hot water outlet old water outlet ir release valve Drain port 0 0 ZG/ old water Hot water inlet inlet -pipe duct 59 0 8 55 0 50 D 50 7 5 9 0 07 () D() 500 56 700 76 900 96 00 6 9 50
ontrol Devices ireless remote controllers R05/BGE ppearance Function Descriptions LD display screen Mode control speeds control Time setting / Temp. setting / Swing setting pplicable FUs -way assette (standard) ompact -way cassette (standard) all mounted (standard) ccessories P Board ontrol Kit for FU vailable for all non-pb FUs. Flexible installation, it can be attached to the unit, mounted on a wall or hung under a ceiling. External installation making maintenance more convenient. Functions: Three fan speeds control, ater pump control, Long-distance ON/OFF control, LRM function, Electric heater control. Operating status can be displayed by wired controller lamp indicator. entralized control function. BMS control function through Modbus protocol. ired controllers ppearance Function Descriptions pplicable FUs LD display screen KJRP-86-E Mode control speeds control Timer setting / Temp. setting Duct without electric heater (optional) P Board ontrol Kit Mechanical thermostat KJR-8B/E KJR-B/D Mode control speeds control Temp. setting LD display screen Mode control / speeds control Electric heater control Temp. setting Duct without electric heater (optional) Duct with electric heater (optional) entralized control LD display screen KJR-5B/E KJR-9B/E Mode control speeds control Temperature display in o F or o LD display screen Mode control speeds control Temp. setting Floor standing / eiling & floor (optional) assette / all-mounted (optional) X,Y,E X,Y,E entralized controller X,Y,E X,Y,E Swing function KJR-B/E entralized controllers Mode control speeds control Temp. setting assette / all-mounted (optional) BMS control function through Modbus protocol ppearance Function Descriptions pplicable FUs Large LD display screen M0 Max. of 6 FUs can be controlled by a M0 Mode control / fan speed control Time setting / temp. setting / swing setting P,Q,E P,Q,E P,Q,E M09 eekly schedule function Basic functions are same as M0 ll FUs -way cassette and compact -way cassette FUs need customize PB, none-pb FUs need adding P board control kit) P,Q,E QE P R+ R- E RS Pin hole Modbus Modbus BMS M0 Touch-style keys Basic functions are same as M0 USB port 5 5
Specifications pplicable appliance V-Ph-Hz E-FUKZ-0 -pipe FUs 0~0--50/60 E-FUKZ-0 -pipe FUs pplication of entral ontrol & BMS ontrol Operation range Room temp. o 7-0 Temp. controlling precision Net dimension Packing size Inlet water temp. H D H D o o -75 ± 96 66 0 5 6 PB Kit..5 Valve Kit orking Voltage: 0±0%, 50/60Hz(V can be customized). Power onsumption: Nominal Pressure:.6MPa. pplied Medium: old or hot water, 50% glycol water liquor. Medium Temperature: -5 (DDSTF-0), -0- (DDSTF-0/05). Environment Temperature: -5-50 (DDSTF-0), 0-50 (DDSTF-0/05). PB Kit PB Kit M-interface LN P ccess Laptop ccess DDSTF-0 DDSTF-0 DDSTF-05 M-net Pad ccess loud Servers th generation monitoring system DN() Inner Screw Thead pplicable ppliance DDSTF-0 0 / -pipe cassette/duct/floor standing, -pipe duct P Data converter M5 DDSTF-0 5 / -pipe cassette (for hot water) Internet Router DDSTF-05 0 / -pipe ceiling & floor, -pipe cassette (for cold water) BMS Bnet Modubus Lonorks BMS gateway Note: DDSTF-** is the model of valve. The valve kit includes valve, actuator and conneting pipe. For different model of units, the models of valve kit are different. P in LN TP/IP network Note: If cassette type units connect to centralized controller or BMS, PB of the unit should be customized. 5 5
Selection Software Features Selection Interface Select by entering air and water conditions as well as fan speed. Easy to operate interface and visual display. Powerful project management function. Report Data Interface Main Interface Function rea Management rea Selection rea dd/delete Unit 55 56