Register your product and get support at AC4091. User manual

Contents 1 Important 4 Safety 4 11 Notices 0 0 Compliance with EMF 0 Recycling 0 English 5 What s in the box 5 3 Get started 6 6 8 Understand the air quality light 8 Understand the auto mode 8 Understand the healthy air protect alert 8 Understand the healthy air protect lock 8 Switch on or off 9 Change the fan speed 9 Auto 9 Manual 9 Silent mode 10 Set the timer 10 1 13 15 15 17 lifetime counter 17 9 Troubleshooting 18 10 Guarantee and service 19 Order parts or accessories 19 EN 3

1 Important Read this user manual carefully before you use the appliance, and save it for future reference. Danger detergent enter the appliance to avoid electric shock Do not clean the appliance with water, any other Warning Check if the voltage indicated on the bottom or indicated at the rear of the appliance corresponds to the local power voltage before you connect the appliance. If the power cord is damaged, you must have it replaced by Philips, a service center authorized by a hazard. Do not use the appliance if the plug, the power cord, or the appliance itself is damaged. This appliance is not intended for use by persons or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet. Caution This appliance is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking. If the power socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure that you plug the appliance into a properly connected power socket. Always place and use the appliance on a dry, stable, level, and horizontal surface. Leave at least 0cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance. Do not place anything on top of the appliance and do not sit on the appliance. Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance. switch on the appliance. Always lift or move the appliance by the handle at the back of the appliance. outlet. Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes. Do not use the appliance near gas appliances, heating Always unplug the appliance after use and before you clean it. temperature changes, as this may cause condensation inside the appliance. To prevent interference, place the appliance at least m away from electrical appliances that use airborne radio waves such as TVs, radios, and radio-controlled clocks. The appliance is only intended for household use under normal operating conditions. Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet, or kitchen. The appliance does not remove carbon monoxide device in case of accidents with combustion processes and hazardous chemicals. 4 EN

Register your product and get support at AC4016 Filter : Extra capacity formaldehyde : : AC4187 1: 1: www.philips.com/welcome Quick start guide AC4091 4 Air quality senser Congratulations on your purchase, and welcome to Philips! offers, register your product at www.philips. com/welcome. Read this user manual carefully before you install and use the unit. Save it for future reference. English What s in the box Check and identify the contents of your package: Air quality sensor 4 (AC4187) www.philips.com/welcome Warranty English 3 19 33 User manual Quick start guide Warranty EN 5

3 Get started 3 inside, but you have to remove the packaging Tip against a wall for more stability. 4 Remove all packaging material from the Make sure that the side with the tag is pointing towards you. 1 side panels. Gently pull the bottom of the panel out 5 1 6 EN

6 English 1 Make sure that the side with the two clips is pointing towards you, and that all hooks are properly 7 To reattach the front panel, mount the Then, gently place the panel against the 1 EN 7

4 Use the air Understand the air quality light Air quality level light Blue excellent Deep purple good Purple fair Red bad The air quality light automatically goes on indicator goes on. Press the button, and the air quality light dims and blinks. The indicator goes on. Press the button again to turn off the air quality light. The built-in air quality sensor measures the air quality and automatically selects the appropriate color of the air quality light. When the air is clean, the color of the air quality light is in blue or deep purple. When the air quality deteriorates, the color of the air quality light changes to purple or red. Understand the auto mode The built-in air quality sensor automatically measures the ambient air quality, and selects the most appropriate fan speed. Understand the healthy air protect alert protect alert combination Filter light and Filter light and Follow this Clean the pre- Replace the Formaldehyde Understand the healthy air protect lock and the» locked.» illuminate continuously. depends on the operating time and speed level needs to be replaced. holding the button. 8 EN

1» All lights go on twice and you hear a beep. Then, the lights go out again. Control Panel Press the»» The air quality light shows the quality of the air. button to switch on the Auto auto mode by default. Manual You can manually select the desired fan speed, which overrides the auto mode. 1 Press the button to switch on the English Press the button once or more,,,, or 3 Press the button again to switch off the Tip If the air quality light is in blue or in deep purple color, this means the air quality is good or excellent, and you can select a lower fan speed. On the other hand, if the air quality light is in red or in purple color, this means the air quality is bad or fair. You can select the turbo fan speed to clean the air quickly. EN 9

Silent mode quietly. 1 Press the button to switch on the Press the button to select silent mode.» The light goes on. Set the timer With the timer function, you can let the automatically switches off. You can use the timer function in couple of situations: Situations You will see Choose a fan One of the speed manually,, or the,, or in auto mode light is on. One of the,,, or one of the,, or The light and one of in silent mode the,, or 1 Press the button to switch on the To change to another fan speed, press the button. 10 EN

Press the button to activate the timer.» The,, or English 3 Press the button repeatedly to choose the number of hours you corresponding light goes on. To deactivate the timer function, press the button repeatedly until the light,, or EN 11

5 Clean your air liquid. agents such as bleach or alcohol to clean any part of Regularly clean the inside and outside of the 1 Wipe away dust with a soft dry cloth Clean the air inlet and the air outlet with a soft dry cloth. 1 EN

6 Clean the pre- panels, then lift and detach the bottom of the top part of the front panel out of the English and last for 4 hours. 1 3 1 1 4 5 6 to brush away the dust. 1 EN 13

7 To reattach the front panel, insert the top 1 and removing the dust with a vacuum cleaner. still wet, bacteria may multiply in it and shorten the Make sure that the side with the two clips is pointing towards you, and that all hooks are properly 14 EN

7 Replace the light panel will be off. operating state. Make sure that the side with the tag is pointing towards you. 1 English Replace the Formaldehyde vacuum cleanable. light side panels. 3 Gently pull the bottom of the panel out 1 4 1 Tip against a wall for more stability. EN 15

5 8 1 6 Remove all packaging material from the Make sure that the side with the two clips is pointing towards you, and that all hooks are properly 9 To reattach the front panel, mount the Then, gently place the panel against the 7 Place the new Formaldehyde removal 1 10 16 EN

3 Put the plug in the power socket and English on. 4 Press and hold the button for seconds. Reset the Formaldehyde counter After you have replaced the Formaldehyde 1 EN 17

9 Troubleshooting This chapter summarizes the most common problems you could encounter with the with the information below, contact the Consumer Care Center in your country. Problem Possible solution light has been on continuously. No air comes out to the power supply. Plug the of the air outlet. and switch on. The fan speed does not change when the silent mode is activated. that comes out of the air outlet is weaker than before. The air quality does not improve, even though has been operating for a long time. In silent mode, the fan speed is set to a very low level. If you want to change the fan speed and leave the silent mode, press the button one or more times to set the desired fan speed. You haven t removed all packaging material from the removed all packaging material. installed in the following order, starting with the innermost Problem Possible solution The color There is not enough ventilation of the air in the room. Open a window, quality light to improve the air circulation. always stays the same. You have not removed all is extra loud. packaging material from the removed all packaging material. You can change the fan speed to lower fan speed level. still indicates that I need to replace a already did. Perhaps you did not press the button properly. Plug in button and press the button for seconds. 18 EN

10 Guarantee and service English If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Care Centre in your country, go to your local Philips dealer. Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support. If you have problems obtaining the parts, please contact the Philips Consumer Care EN 19

11 Notices The making of unauthorized copies of copy-protected material, including computer recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products. device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment. Recycling This Philips appliance complies with all to the instructions in this user manual, the evidence available today. Compliance with EMF manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health handled properly for their intended use, they available today. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 00/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. All unnecessary packaging has been omitted. We have tried to make the packaging easy to Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 0 EN

notice. Trademarks are the property of respective owners. Philips reserves the right to change products at any time without being English EN 1