SOUTH AFRICAN NATIONAL STANDARD

Similar documents
SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD

SANS 21-1:2009 Edition 1 EN 115-1:2008

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD

REFRIGERATING SYSTEMS AND HEAT

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

Office furniture - Office work chair - Part 2: Safety requirements

This document is a preview generated by EVS

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO :2005

BIOLOGICAL EVALUATION OF MEDICAL

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

This document is a preview generated by EVS

This document is a preview generated by EVS

Sýnishorn Windows and doors - Watertightness - Test method

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Founding - Magnetic particle testing

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

This document is a preview generated by EVS

This document is a preview generated by EVS

ILNAS-EN ISO :2017

This document is a preview generated by EVS

ILNAS-EN ISO 2692:2006

OVERHEAD ELECTRICAL LINES EXCEEDING

CONFORMITY ASSESSMENT - SUPPLIER'S

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS


This document is a preview generated by EVS

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

This document is a preview generated by EVS

Paper and board - Determination of grammage (ISO 536:2012)

This document is a preview generated by EVS

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Safety of woodworking machines - One side thickness planing machines

This document is a preview generated by EVS

FINAL DRAFT FprEN

ALARM SYSTEMS - INTRUSION AND

This document is a preview generated by EVS

SOUTH AFRICAN NATIONAL STANDARD

Sýnishorn General requirements for components used in drains and sewers

Irish Standard I.S. EN :2009

This document is a preview generated by EVS

REFRIGERATING SYSTEMS AND HEAT

PISTON-OPERATED VOLUMETRIC

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS


ILNAS-EN ISO 10684:2004

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.

This document is a preview generated by EVS

This document is a preview generated by EVS

Medical gloves for single use - Part 2: Requirements and testing for physical properties

This document is a preview generated by EVS

ÍST EN :2015. Gildistaka ICS: 53.06

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

This document is a preview generated by EVS

This document is a preview generated by EVS

WATER QUALITY - CRITERIA FOR

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

PHOTOVOLTAIC DEVICES -- PART 2:

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004)

This document is a preview generated by EVS

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

This document is a preview generated by EVS

This document is a preview generated by EVS

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

PLASTICS - DETERMINATION OF THE MELT

This document is a preview generated by EVS

Transcription:

ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment This national standard is the identical implementation of EN 1176-10:2008, and is adopted with the permission of CEN, Avenue Marnix 17, B-1000 Brussels, Belgium. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS

EN 1176-10:2008 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS/TC 1090, Safety of playgrounds and playground equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in August 2010. Reaffirmed and reprinted in July 2015. This document will be reviewed every five years and be reaffirmed, amended, revised or withdrawn. SABS

EUROPEAN STANDARD EN 1176-10 NORME EUROPÉENNE EUROPÄISCHE NORM May 2008 ICS 97.200.40 English Version Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment Équipement d'aires de jeux et revêtements de surface d'aires de jeux - Partie 10: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux équipements de jeu totalement fermés Spielplatzgeräte und Spielplatzböden - Teil 10: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für vollständig umschlossene Spielgeräte This European Standard was approved by CEN on 25 April 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. B-1050 Brussels Ref. No. EN 1176-10:2008: E

EN 1176-10:2008 (E) Contents Page Foreword...3 1 Scope...4 2 Normative references...4 3 Terms and definitions...4 4 4.1 4.2 4.2.1 4.2.2 4.3 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 4.3.8 4.3.9 4.4 4.4.1 4.4.2 4.4.3 4.4.4 Safety requirements...6 General...6 Emergency procedures and fire safety management...6 Materials including flammability...6 Evacuation...6 Design and manufacture...10 Structural integrity...10 Impact protection...10 External climbability...10 Visibility...10 Determination of spaces and areas...10 Connections...11 Rope features...11 Lighting...12 Signage...12 Specific equipment...12 Drop slides...12 Overhead track rides (rigid)...13 Ball pool...15 Electrically powered equipment...16 5 Inspection and maintenance information to be provided by the manufacturer or supplier...16 6 Test reports...18 7 Marking...18 2

EN 1176-10:2008 (E) Foreword This document (EN 1176-10:2008) has been prepared by Technical Committee CEN/TC 136 Sports, playground and other recreational facilities and equipment, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This European Standard consists of a number of parts as follows: EN 1176-1, Playground equipment and surfacing Part 1: General safety requirements and test methods EN 1176-2, Playground equipment and surfacing Part 2: Additional specific safety requirements and test methods for swings EN 1176-3, Playground equipment and surfacing Part 3: Additional specific safety requirements and test methods for slides EN 1176-4, Playground equipment and surfacing Part 4: Additional specific safety requirements and test methods for cableways EN 1176-5, Playground equipment and surfacing Part 5: Additional specific safety requirements and test methods for carousels EN 1176-6, Playground equipment and surfacing Part 6: Additional specific safety requirements and test methods for rocking equipment EN 1176-7, Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation EN 1176-10, Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment EN 1176-11, Playground equipment and surfacing Part 11: Additional specific safety requirements and test methods for spatial network This part of EN 1176 should not be used in isolation, but in conjunction with EN 1176-1, EN 1176-7 and EN 1177. For inflatable play equipment see EN 14960, Inflatable play equipment Safety requirements and test methods According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 3