Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height mm inch Connector Description Pitch 1.00 0.039.4mm Fine Stack.4mm 1.50 0.059.4mm Fine Stack.4mm 1.50 0.059.5mm Fine Stack.5mm 3.00 0.118.8mm Fine Stack.8mm 3.90 0.154.8mm Fine Stack.8mm 4.00 0.157.5mm Fine Mate.5mm 4.00 0.157.6mm Free Height.6mm 4.00 0.157.8mm Fine Mate.8mm 4.20 0.165.8mm Fine Stack.8mm 4.50 0.177.5mm Fine Mate.5mm 4.50 0.177.8mm Fine Mate.8mm 4.70 0.185.8mm Fine Stack.8mm 5.00 0.197.5mm Free Height.5mm 5.00 0.197.6mm Free Height.6mm 5.00 0.197.8mm Fine Stack.8mm 5.00 0.197.8mm Free Height.8mm 5.50 0.217.5mm Fine Mate.5mm 5.90 0.232.8mm Fine Stack.8mm 6.00 0.236.5mm Fine Mate.5mm 6.00 0.236.5mm Free Height.5mm 6.00 0.236.6mm Free Height.6mm 6.00 0.236.8mm Free Height.8mm 6.35 0.250 AMPMODU 50/50.050" 6.60 0.260 MICTOR.025" 7.00 0.276.5mm Free Height.5mm 7.00 0.276.6mm Free Height.6mm 7.00 0.276.8mm Fine Stack.8mm 7.00 0.276.8mm Free Height.8mm 8.00 0.315.5mm Free Height.5mm 8.00 0.315.6mm Free Height.6mm 8.00 0.315.8mm Free Height.8mm 8.00 0.315 1mm Free Height 1mm 8.13 0.320 AMPMODU 50/50.050" 9.00 0.354.5mm Free Height.5mm 9.00 0.354.8mm Fine Stack.8mm 9.00 0.354.8mm Free Height.8mm 9.00 0.354 1mm Free Height 1mm 9.00 0.354 MICTOR.025" 9.91 0.390 AMPMODU 50/50.050" 10.00 0.394.6mm Free Height.6mm 10.00 0.394.8mm Free Height.8mm 10.00 0.394 1mm Free Height 1mm 10.92 0.430 MICTOR.025" 11.00 0.433.5mm Free Height.5mm 11.00 0.433.6mm Free Height.6mm 11.00 0.433.8mm Free Height.8mm 11.00 0.433 1mm Free Height 1mm 12.00 0.472.5mm Free Height.5mm 12.00 0.472.6mm Free Height.6mm 12.00 0.472.8mm Free Height.8mm 12.00 0.472 1mm Free Height 1mm 12.57 0.495 MICTOR.025" 13.00 0.512.6mm Free Height.6mm 13.00 0.512.8mm Free Height.8mm 13.00 0.512 1mm Free Height 1mm 13.08 0.515 AMPMODU System 50.050" 14.00 0.551.6mm Free Height.6mm 14.00 0.551.8mm Free Height.8mm 14.00 0.551 1mm Free Height 1mm 15.00 0.591.5mm Free Height.5mm 15.00 0.591.6mm Free Height.6mm 15.00 0.591.8mm Free Height.8mm 15.00 0.591 1mm Free Height 1mm 15.61 0.615 MICTOR.025" 16.00 0.630.5mm Free Height.5mm 16.00 0.630.6mm Free Height.6mm 16.00 0.630.8mm Free Height.8mm 17.96 0.707 MICTOR.025" 18.00 0.709.6mm Free Height.6mm 18.00 0.709 MICTOR.025" 18.75 0.738 MICTOR.025" 20.00 0.787.6mm Free Height.6mm 20.00 0.787 MICTOR.025" 21.60 0.850 MICTOR.025" 22.86 0.900 MICTOR.025" 27.00 1.063 MICTOR.025" 27.80 1.094 MICTOR.025" Connector Sizes (No. of Positions) Connector Sizes (No. of Positions) Continued 10 12 14 16 20 22 24 30 34 38 40 46 50 54 56 60 64 70 76 80 84 100 114 120 140 152 160 180 190 200 220 228 240 266 280 320 440 3 29.00 1.142 MICTOR.025" 4 31.90 1.255 MICTOR.025"
AMPMODU System 50 Surface-Mount, 1.27 [.050] Centers, Board-to-Board Product Facts Surface-mount option for parallel board-to-board applications; completely intermateable with AMPMODU System 50 through-hole board-to-board and cable-to-board systems Dual-row, vertical, shrouded header and receptacle assemblies Available in select sizes from 10 through 100 positions High Density; contacts spaced on 1.27 x [.050 x.100] centers; compact footprint Compatible with standard surface-mount processes Stand-offs for free drainage of flux cleaning solutions; visible solder joints for easy inspection Simple, low insertion-force holddown for process retention and long-term strain relief for solder joints Available in tape and reel packaging for automatic placement. Recognized under the Component Program of Underwriters R Laboratories Inc., File No. E28476 Certified by Canadian Standards R Association, File No. LR 7189 The high-density surfacemount connector is another mounting option in the AMPMODU System 50 connector family. This surface-mount system is totally intermateable with the AMPMODU System 50 thru-hole and cable-toboard connectors. Additionally, the design of the mating interface has not been changed, ensuring the same high reliability as the thru-hole product. The surface-mount system includes dual-row, vertical, shrouded header and receptacle assemblies in select sizes from 10 through 100 positions. It meets the tight dimensional requirements of surfacemount technology. The simple, low insertion-force holddown provides both processing retention and long-term strain relief for the solder joints in the headers and receptacles. See Catalog 1307819 for additional AMPMODU product offerings. 101
AMPMODU System 50 Surface-Mount, 1.27 [.050] Centers, Board-to-Board (Continued) Board Mounted FFC Cable Mount Board Mount Surface- Mount (Page 113) Board Mounted Unshrouded Shrouded Board Mount Unshrouded FFC Cable Mount Unshrouded The AMPMODU System 50 connector family includes a wide variety of high density board-to-board (thru-hole and surface-mount) and cable-to-board connectors. System 50 connectors are composed of one- and tworow receptacles and posted headers with 1.27 x [.050 x.100] spacing between contacts for extreme density and efficient use of printed circuit board area. Complete details on the AMPMODU System 50 connector family are presented in Tyco Electronics Catalog 1307819. Surface- Mount (Page 114) FTC Cable Mount Performance Characteristics Current Rating 1.0 ampere per contact Dielectric Withstanding Voltage 500 VAC Insulation Resistance 5,000 megohms min. Durability Tested to 200 cycles Mating Force 1.38 N [5 oz] max. per contact Unmating Force 0.22 N [0.8 oz] min. per contact Operating Temperature -65 C to +105 C Shrouded Dual-Row with Card Slot Dual-Row.025 Ribbon Cable Mount 102
Surface-Mount s, 1.27 [.050] Centers, Board-to-Board [.100] 1.14 [.045] Ref. 8.74 [.344] 7.21 [.284] 1.32 Typ. [.052] 1.40 [.055] LOCALIZED GOLD PLATE AREA 0.79 ± 0.25 [.031 ±.010] Material and Finish Housing Glass-filled thermoplastic, black, 94V-0 rated Contacts Phosphor bronze, plated 0.00076 [.000030] gold in mating area, 0.00381 [.000150] tin on solder tail, with entire contact underplated 0.00127 Holddown Copper alloy, plated 0.00381 [.000150] tin over 0.00127 Technical Documents (page 113) Product Specification 108-1093 Application Specification 114-25035 11.05 ± 0.18 [.435 ±.007] 1.35 ± 0.15 [.053 ±.006] 3.51 [.138] 5.69 [.224] A ± 0.08 [±.003] 1.45 ± 0.25 [.057 ±.010] 0.38 R Typ. [.015] 1.91 [.075] Detail A 1.52 Dia. Typ. [.060] (Pad) 1.07 ± 0.08 [.042 ± Dia. Typ..003] (Plated-Thru Hole) 9.19 [.362] 2.84 [.112] 0.74 [.029] Typ. Recommended PC Board Layout No. of Dimensions Part Numbers Positions A B C D E Pkg in Tube Pkg in Tape & Reel* 10 9.65 5.08 0.64.380.200.025 5-104549-1 5-147377-1 12 10.92 6.35.430.250 6-104549-1 20 16.00 11.43 3.81 3.81.630.450.150.150 5-104549-2 5-147377-2 24 18.54 13.97 5.08 5.08.730.550.200.200 5-104549-3 5-147377-9 30 22.35 17.78 6.99 6.99.880.700.275.275 5-104549-5 5-147377-3 40 28.70 24.13 10.16 10.16 1.130.950.400.400 5-104549-6 5-147377-4 50 35.05 30.48 13.34 13.34 0.64 1.380 1.200.525.525.025 5-104549-7 5-147377-5 60 41.40 36.83 16.51 16.51 1.630 1.450.650.650.000 5-104549-8 5-147377-6 80 54.10 49.53 22.86 22.86 2.130 1.950.900.900.000 5-104549-9 5-147377-7 100 66.80 62.23 29.21 29.21 2.630 2.450 1.150 1.150.000 6-104549-0 5-147377-8 *Parts packaged in tape and reel without holddowns and with vacuum pick and place cover. Note: Part Numbers are RoHS compliant. 103
Surface-Mount s, 1.27 [.050] Centers, Board-to-Board 5.03 ± 0.05 [.198 ±.002] 0.64 [.025] Ref. 3.18 ± 0.20 [.125 ±.008] 2 Plcs. 1.52 [.060] LOCALIZED GOLD PLATE AREA A [.100] Material and Finish Housing Glass-filled, thermpolastic, black, 94V-0 rated Contacts Phosphor bronze, plated 0.00076 [.000030] gold in mating area, 0.00381 [.000150] tin on solder tail, with entire contact underplated 0.00127 Holddown Copper alloy, plated 0.00381 [.000150] tin over 0.00127 Technical Documents (page 113) Product Specification 108-1093 Application Specification 114-25035 9.40 ± 0.08 [.370 ±.003] 3.81 [.150] 3.43 [.135] 1.27 [.050] 1.35 ± 0.15 [.053 ±.006] 1.65 ± 0.03 Dia. Typ. [.065 ±.001] (Pad) 7.24 [.285] Ref. 1.91 [.075] 1.07 ± 0.08 Dia.Typ. [.042 ±.003] (Plated-Thru Hole) 0.74 [.029] Typ. [.100] Typ. Recommended PC Board Layout No. of Dimensions Part Numbers Positions A B C Pkg in Tube Pkg in Tape & Reel* 10 7.47 5.08 10.16.294.200.400 5-104550-1 5-147378-1 20 13.82 11.43 16.51.544.450.650 5-104550-2 5-147378-2 24 16.36 13.97 19.05.644.550.750 5-104550-3 5-147378-9 30 20.17 17.78 22.86.794.700.900 5-104550-4 5-147378-3 40 26.52 24.13 29.21 1.044.950 1.150 5-104550-5 5-147378-4 50 32.87 30.48 35.56 1.294 1.200 1.400 5-104550-6 5-147378-5 60 39.22 36.83 41.91 1.544 1.450 1.650 5-104550-7 5-147378-6 80 51.92 49.53 54.61 2.044 1.950 2.150 5-104550-8 5-147378-7 100 64.62 62.23 67.31 4 2.450 2.650 5-104550-9 5-147378-8 *Parts packaged in tape and reel without holddowns and with vacuum pick and place cover Note: Part Numbers are RoHS compliant. 104