Certificate of Compliance Certificate: 2185148 (217005) Issued to: RAE Systems, Inc. 3775 North First St San Jose, California 95134 USA Attention: James Pan The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Issued by: Gary Benden Gary Benden PRODUCTS Class 4828-01 SIGNAL APPLIANCES Combustible Gas Detection Instruments for Hazardous Locations Class 4828-81 SIGNAL APPLIANCES Combustible Gas Detection Instruments for Hazardous Locations Certified to U.S. Standards Class I; Division 1; Group A, B, C, D; T4 Model FTD-3000 LEL, MeshGuard fixed Combustible Gas Detector, Ambient -40 C to +50 C, Intrinsically safe when powered by RAE battery, p/n 500-0111-000 or an intrinsically safe external power source with an entity parameter that does not exceed the FTD-3000 LEL rating of Ui = 3.6 V. Note: The FTD-3000 LEL is intended to be mounted in a fixed location using a metal holster and is not intended to be portable. Internal batteries are to be replaced only when the area is known to be non-hazardous and without removing the FTD-3000 LEL from the holster. Class 4828-02 SIGNAL APPLIANCES Toxic Gas Detection Instruments for Hazardous Locations Class 4828-82 SIGNAL APPLIANCES Toxic Gas Detection Instruments for Hazardous Locations Certified to U.S. Standards Class I; Division 1; Group A, B, C, D; T4 DQD 507 Rev. 2012-05-22 Page 1
Model FTD-3000 EC, MeshGuard single Toxic Gas Detector, Ambient -40 C to +50 C, Intrinsically safe when powered by RAE battery, p/n 500-0111-000 or an intrinsically safe external power source with an entity parameter that does not exceed the FTD-3000 EC rating of Ui = 3.6 V. Model FTD-3000 CO2, MeshGuard single Toxic Gas Detector, Ambient -20 C to +50 C, Intrinsically safe when powered by RAE battery, p/n 500-0111-000 or an intrinsically safe external power source with an entity parameter that does not exceed the FTD-3000 CO2 rating of Ui = 3.6 V. Note: The FTD-3000 EC and FTD-3000 CO2 are intended to be mounted in a fixed location or used as portable instruments. The internal battery may only be replaced in an area known to be nonhazardous. APPLICABLE REQUIREMENTS CAN/CSA Standard C22.2 No. 0-M91 (Reaffirmed 2006) CSA Standard C22.2 No. 30-M1986 (Reaffirmed 2003) CSA Standard C22.2 No. 142-M1987 (Reaffirmed 2004) CSA Standard C22.2 No. 152-M1984 (Reaffirmed 2006) CAN/CSA Standard C22.2 No. 157-92 (Including update No. 2, June, 2006) ANSI/ISA-12.13.01-2003 (IEC 61779-1 through 5 Mod) ANSI/UL Standard 913 (Sixth Edition, Dated August 8, 2002. With revisions through and including August 9, 2004) UL Standard 916 (Fourth Edition, Dated December 17, 2007) ANSI/UL Standard 1203 (Fourth Edition, September 2006) General Requirements - Canadian Electrical Code, Part II Explosion-Proof Enclosures for Use in Class I Hazardous Locations Process Control Equipment Combustible Gas Detection Instruments Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous Locations Performance Requirements for Combustible Gas Detectors Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations Energy Management Equipment Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations The following standards were used in whole or in part as a guideline. IEC 60079-0 (Edition 5.0 2007-10) IEC 60079-11 (Fifth Edition 2006-07) Explosive Atmospheres Part 0: Equipment General Requirements Explosive Atmospheres Part 11: Equipment Protection by Intrinsic Safety i DQD 507 Rev. 2012-05-22 Page 2
MARKINGS The manufacturer is required to apply the following markings: Products shall be marked with the markings specified by the particular product standard. Products certified for Canada shall have all Caution and Warning markings in both English and French. Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having Jurisdiction. It is the responsibility of the manufacturer to provide and apply these additional markings, where applicable, in accordance with the requirements of those authorities. The products listed are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US (indicating that products have been manufactured to the requirements of both Canadian and U.S. Standards) or with adjacent indicator 'US' for US only or without either indicator for Canada only. Markings are as shown in drawings D01-40EC-LBL-CSA or D01-4LEL-LBL-CSA. These labels use CSA certified adhesive-type material Flexcon THERMAL film Select 21830 or Brady B-423. The holster duplicates the LEL warning markings. The markings appear on either the Flexcon or the Brady label or alternatively, the markings can be silkscreened or laser etched onto the holster, see drawing D01-HSTR-000 or 019-HSTR-000. The following markings are required for both FTD-3000 EC and FTD-3000 LEL: Manufacturer s name: RAE Systems, RAE, or CSA Master Contract Number 217005, adjacent to the CSA Mark in lieu of the manufacturer name; Model designation: as specified in the PRODUCTS section, above; Complete electrical rating: (RAE 500-0111-000 battery and Ui=3.6 V); Hazardous locations designation: as specified in the PRODUCTS section, above; Temperature Code: as specified in the PRODUCTS section, above; Ambient temperature range: as specified in the PRODUCTS section, above; Manufacturing date in MMYY format, or serial number, traceable to year and month of manufacture. The CSA Mark with or without C and US indicators, as shown on the Certificate of Conformity. WARNING: Use only RAE 500-0111-000 for internal battery. WARNING Read and Understand User s Manual before operating or servicing. The following additional markings are required for the FTD-3000 EC: WARNING: Do not replace internal battery in hazardous locations. The following additional markings are required for the FTD-3000 LEL and its holster: WARNING: FOR FIXED USE ONLY. C22.2 No. 152-M1984 and ANSI/ISA-12.13.01-2000 adjacent to CSA Monogram (optional on holster). WARNING - Internal battery must be replaced under a hot work permit where the atmosphere is determined to be nonhazardous while the battery is being replaced. The following required warnings shall appear in the FTD-3000 EC User Manual: WARNING: Only Change internal battery in non-hazardous locations and use the battery RAE Systems provide, 500-0111-000. Only remove the external battery adaptor in nonhazardous locations. WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY. DQD 507 Rev. 2012-05-22 Page 3
The following required warnings shall appear in the FTD-3000 LEL User Manual: "WARNING: WIRELESS COMMUNICATION IS INTENDED FOR USE AS A SECONDARY REMOTE ALARM STATUS NOTIFICATION ONLY. PRIMARY ALARMING OF COMBUSTIBLE GAS HAZARDS IS PROVIDED LOCALLY BY DETECTOR". WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY. The monitor does not provide a real time alarm latch. If the alarm condition persists for 3 minutes, the alarm will latch. Note - Jurisdictions in Canada may require these markings to also be provided in French language. It is the responsibility of the manufacturer to provide bilingual marking, where applicable, in accordance with the requirements of the Provincial Regulatory Authorities. It is the responsibility of the manufacturer to determine this requirement and have bilingual wording added to the "Markings". DQD 507 Rev. 2012-05-22 Page 4
Supplement to Certificate of Compliance Certificate: 2185148 (217005) The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Project Date Description Product Certification History 70022156 2015-11-04 Update to report 2185148 to add new model, FTD-3000 CO2, MeshGuard single Toxic Gas Detector. 70013154 2014-11-21 Update of report 2185148 to include alternate enclosure material, Bayer Makrolon 2805. Based on acceptance under report 1865837. 2656015 2014-02-21 Update report 2185148 to include alternate sensors and associated sensor board. 2270910 2010-02-15 Update to Report 2185148 to add alternate Model FTD-3000 LEL holster. 2185148 2009-08-07 Original certification of FTD-3000 EC (Toxic Gas Detector) and FTD-3000 LEL (Combustible Gas Detector) as intrinsically safe for Class I; Division 1; Groups ABCD. DQD 507 Rev. 2012-05-22 Page 1