L29- (UNS S7) Direct Vent System for ategory II, III & IV Heating Equipment through Set the standard as the first vent system with a built-in gasket and locking band, designed for high efficiency gas heaters where cool flue gases are vented under pressure. patent #,02,80 additional patents pending 200 UL US LISTED
200 PROTEH SYSTEMS, IN. LEDERS IN VENTING TEHNOLOGY Since 98, ProTech Systems, Inc. (PTS) has developed and delivered innovative vent products to the merican Market. PTS has long been recognized as a leader in the Hearth Market and, with the introduction of FasNSeal to the HV industry, has established yet another benchmark. VENTINOX was the first himney Lining System in the U.S. to earn the listing by Underwriters Laboratories in 982. Utilizing a unique welding technique, VENTINOX still maintains its technological lead today and has established a long and impeccable track record. PTS started producing the first chimney liner ever made from L29- in 98 and has gained unprecedented manufacturing experience with this superferritic stainless steel. Our know-how was leveraged when a brand new manufacturing facility was established to build FasNSeal, the first gasketed and butt-welded vent system for high efficiency gas fired equipment. Research had indicated that the HV market needed a product that was safe and reliable, easy to install, cost effective and projected a professional image. Since its introduction in 99, FasNSeal has become the market leader and standard for today s venting products. To our many customers in the HV industry, ProTech Systems has proven to be a prompt, reliable and responsive business partner. *L29- is a registered Trademark of llegheny Ludlum, Inc. FasNSeal Material Selection and Experience ounts FasNSeal is manufactured from L29-, a superferritic stainless steel designed for extreme resistance to chloride ion pitting, crevice corrosion and stress corrosion cracking, as well as general corrosion in oxidizing and moderately reducing environments. L29- is an ideal choice for resisting deleterious effects of corrosive condensates created by partially or fully condensing natural gas and propane fired heating appliances. Rated Operating Temperature & to LERNE TO OMUSTILES 00 F 9 80 F 29 00 F 9 80 F 29 Enclosed Hor Sides: 8 / 20.2mm Top: 2 / 0.8mm ottom: / 0.mm Noncombustible enclosure Vert 0.mm 0.mm Unenclosed The anadian Gas Research Institute found that test results proved L29- to be one of two most corrosion resistant alloys of twenty candidate stainless steels evaluated for resistance to chlorideinduced corrosion in condensing and partially condensing gas-fired appliances. FasNSeal has been tested and is listed by Underwriters Laboratories, Inc. to UL 78 and UL-S-9. ProTech Systems own experience with L29- dates back to 98, when VENTINOX VG for gas appliances was introduced as the first chimney lining Hor 2.mm 7.2mm 7.2mm 7.2mm Vert 2.mm 7.2mm 7.2mm 7.2mm Rated Operating Temperature of 00 F = Max Flue Gas Temperature of 7 F Rated Operating Temperature of 80 F = Max Flue Gas Temperature of 0 F system made from this alloy. VENTINOX provides safe venting in thousands of merican homes today and features a lifetime warranty. MTERIL THIKNESS L29- -7 (7.2mm-77.8mm) 8-2 (20.2mm-0.8mm) - (.mm-0.mm) FasNSeal Vertical, through the roof Installation FasNSeal pplications.0 (.mm).09 (.mm).02 (.mm) FasNSeal is a Special Gas Vent and Gas Vent onnector, made from L29- stainless steel and designed for use on natural gas or propane-fired appliances listed as ategory II, III and IV or in anada Type H Gas Vent Systems having a rated operating temperature of 80 degrees F and maximum positive pressure of water column. FasNSeal provides horizontal or vertical venting for high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters. FasNSeal may also be used as a vent for ategory I, natural gas or propane-fired heaters. FasNSeal must be sized according to the heating appliance manufacturers instructions, NFP 2, NFP and any other relevant local building codes and regulations (see installation instructions for details!). 2
Fully ompatible With Double Wall FasNSeal W2 200 FasNSeal is a Heating ontractor s Dream ome True! Each vent length and component features a built-in mechanical locking band and gasket. Parts are simply pushed together to a stop bead, which renders the joints air and water- tight. y tightening the integrated mechanical locking band, parts are fastened together in seconds. FasNSeal can be taken apart and reassembled in minutes, making inspection, maintenance or rerouting of FasNSeal systems a breeze. Should a part or gasket ever become damaged, replacement takes less than five minutes and the integrity of the system is not compromised! djustable vent lengths featured in our Wall Thimbles allow for built-in horizontal adjustability without the need for cutting pipe. Our standard djustable Vent Length allows 2 to 2 of adjustment, making pitching FasNSeal to properly drain condensate simple. onnecting FasNSeal to a heater is done efficiently with one of our many adaptors approved by heating appliance manufacturers. Heating equipment can be fired up immediately upon completing a FasNSeal installation, as no cure time or cleanup is required. PTS listened to the installer and came up with the perfect way to join FasNSeal parts. No cutting, no exterior clamps, no joints to wipe with alcohol, no rings, no tabs, no mess to clean. FasNSeal is uilt for Performance Proven since 99, FasNSeal features a smooth weld seam inside and out, which is completely shielded during the TIG welding process. ontamination or molecular changes in the weld seam are avoided; no fillers are used in the welding process. Tube ends are formed under the most stringent quality standards to guarantee a perfect fit every time and to avoid built-in stress points or weak areas. FasNSeal Horizontal, through the wall Installation FasNSeal Inside masonry himney FasNSeal Technical Support Is Second To None Submit your specifications on a submittal request form along with your layout and PTS will supply comprehensive submittal drawings and a complete bill of materials within 8 business hours. Unless your specs are changed more than once, this service is provided free of charge. For technical or marketing information visit our website at protechinfo.com. You can contact our technical department at support@protechinfo.com or call.800.7.7 should you prefer personal technical support.
GENERL VENTING FasNSeal Single Wall and FasNSeal W2 Double Wall are interchangeable FasNSeal Vent Length D Product Part.0 0000 0.0 000 8.0 000 8.0.0 0.0 0.0 0000 0007 00090 00002 000 8.0 000 8.0.0 0.0 0.0 000 0007 0009 0000 0007 8.0 0007.0 0.0 0002 00077 0000 0008 8.0 0008.0 0.0 000 00078 0000 0009 7 8.0 0009.0 0.0 000 00079 0000 00020 8 8.0 0000.0 0.0 000 00080 00007 0002 9 8.0 000.0 0.0 000 0008 00008 00022 0 8.0 0002.0 0.0 0007 00082 00009 0002 2 8.0 000.0 0.0 0008 0008 0000 0002 8.0 000.0 0.0 0009 0008 000 0002 8.0 000 00070 0008 FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL00 FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL00 FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL07 FSVL207 FSVL807 FSVL207 FSVL07 FSVL08 FSVL208 FSVL808 FSVL208 FSVL08 FSVL09 FSVL209 FSVL809 FSVL209 FSVL09 FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL2 FSVL22 FSVL82 FSVL22 FSVL2 FSVL FSVL2 FSVL8 FSVL2 FSVL FSVL FSVL2 FSVL8 FSVL2 FSVL
FasNSeal djustable Vent Length D Product Part 2.0-.0 8.0 0020 FSVL 2.0-.0 8.0 002 FSVL 2.0-.0 8.0 0022 FSVL 2.0-.0 8.0 002 FSVL 7 2.0-.0 8.0 002 FSVL7 8 2.0-.0 8.0 002 FSVL8 9 2.0-.0 8.0 002 FSVL9 0 2.0-.0 8.0 0027 FSVL0 2 2.0-.0 8.0 0028 FSVL2 2.0-.0 8.0 0029 FSVL 2.0-.0 8.0 0020 FSVL FasNSeal 90 Degree Elbow D Product Part.9.9 000 FSEL900.. 00 FSEL900.9.9 002 FSEL900. 7. 00 FSEL900 7.9 7.9 00 FSEL9007 8. 8. 00 FSEL9008 9.9 8.9 00 FSEL9009 0 7. 9. 007 FSEL900 2 8. 0. 008 FSEL902 9.. 009 FSEL90 0. 2. 0070 FSEL90 FasNSeal Degree Elbow D Product Part.2.0 000 FSEL0.. 00 FSEL0.2 002 FSEL0.. 00 FSEL0 7.7. 00 FSEL07 8 7.0.7 00 FSEL08 9 7..8 00 FSEL09 0 7.7.0 007 FSEL0 2 8.. 008 FSEL2 9..7 009 FSEL 9.8.9 000 FSEL FasNSeal 0 Degree Elbow D Product Part.9.8 000 FSEL00.2.9 00 FSEL00. 2.0 002 FSEL00.7 2.0 00 FSEL00 7.9 2. 00 FSEL007 8. 2.2 00 FSEL008 9. 2.2 00 FSEL009 0.7 2. 007 FSEL00 2 7.2 2. 008 FSEL02 7.7 2. 009 FSEL0 8.2 2.7 000 FSEL0 GENERL VENTING
GENERL VENTING D FasNSeal Tee D Product Part Vent Dia. Eff. Lgth Eff. Lgth Number Number 7.0..0 007 FST 8.0.0. 007 FST 0.0.0 0077 FST 0.0. 0078 FST 7 7.0.0 0079 FST7 8.0 8.0. 0080 FST8 9.0 8.0 008 FST9 0.0 8.0. 0082 FST0 2 9.0 7.0 008 FST2 20.0.0 8. 008 FST 9. 008 FST FasNSeal Tee ap D Product Part.0 0020 FST.0 0020 FST.0 00207 FST.0 00208 FST 7.0 00209 FST7 8.0 0020 FST8 9.0 002 FST9 0.0 0022 FST0 2.0 002 FST2.0 002 FST.0 002 FST D FasNSeal Universal ondensate Drain D Product Part. 8.. 0090 FSUD. 8.. 009 FSUD. 8.. 0092 FSUD 7. 8.. 009 FSUD7 8. 8.. 009 FSUD8 9. 8.. 009 FSUD9 0. 8.. 009 FSUD0 2. 8.. 0097 FSUD2. 8.. 0098 FSUD. 8.. 0099 FSUD FasNSeal Drain Fitting D Product Part.0. 00220 FSDF.0. 0022 FSDF.0. 00222 FSDF.0. 0022 FSDF 7.0. 0022 FSDF7 8.0. 0022 FSDF8 9.0. 0022 FSDF9 0.0. 00227 FSDF0 2.0. 00228 FSDF2.0. 00229 FSDF.0. 0020 FSDF HORIZONTL VENTING
FasNSeal Horizontal Drip Tee D Product Part..8 002 FSHDT..8 0027 FSHDT - Use FST & FSDF D Engineering services are provided. all.800.7.7 or email engineering@protechinfo.com FasNSeal ird Screen D Product Part 2.0 008 FSS 2.0 0087 FSS FasNSeal 2 Degree ird Screen D Product Part.8 0088 FSS. 0089 FSS 7. 0090 FSS7 8 7. 009 FSS8 9 7.9 0092 FSS9 0 8.7 009 FSS0 2 0.2 009 FSS2.7 009 FSS.2 009 FSS FasNSeal Termination Tee D Product Part.0 00 FSTT. 7.0 002 FSTT.0 8.0 00 FSTT. 9.0 00 FSTT HORIZONTL VENTING FasNSeal Single Wall & FasNSeal W2 Double Wall are interchangeable FasNSeal Termination ox D Product Part 2. 2.0.0 0000 FST 2. 2.0 000 FST D Email us at sales@protechinfo.com or all.800.7.7 for Technical Support FasNSeal Wall Thimble with Volumetric Damper D Product Part Vent 9.0 8.0 0080 FSWTT 0.0 8.0 008 FSWTT 7 MIN.2 MX 8.0
D HORIZONTL VENTING VERTIL VENTING *MIN.2 MX 8.0 MIN.7 MX.0 *MIN.2 MX 8.0 MIN.7 MX.0 FasNSeal Wall Thimble with djustable Vent Length D Product Part Vent * 9.0 8.0 2.0 00280 FSWT * 0.0 8.0 2.0 0028 FSWT *.0 8.0 2.0 00282 FSWT 8.0 2.0 0028 FSWT 7.0 8.0 2.0 0028 FSWT7 8.0 8.0 2.0 0028 FSWT8 9.0 8.0 2.0 0028 FSWT9 0 8.0 2.0 00287 FSWT0 2 8.0 8.0 2.0 00289 FSWT2 20.0 8.0 2.0 00290 FSWT 8.0 2.0 0029 FSWT FasNSeal Wall Pass Through Vent D Product Part * 9.0 0000 FSWPT * 0.0 000 FSWPT *.0 0002 FSWPT 000 FSWPT 7.0 000 FSWPT7 8.0 000 FSWPT8 9.0 000 FSWPT9 0 0007 FSWPT0 2 8.0 0008 FSWPT2 20.0 0009 FSWPT 000 FSWPT FasNSeal Wall Thimble Sleeve Extension Vent D Product Part 9.0 0089 FSWTE 7.0 9.0 0080 FSWTE 8.0 9.0 008 FSWTE 9.0 9.0 0082 FSWTE 7 0.0 9.0 008 FSWTE7 8.0 9.0 008 FSWTE8 9 9.0 008 FSWTE9 0.0 9.0 008 FSWTE0 2.0 9.0 0087 FSWTE2 7.0 9.0 0088 FSWTE 9.0 9.0 0089 FSWTE FasNSeal Firestop/Flat Flashing Vent D Product Part..0 0029 FSFS..0 0029 FSFS. 7.0 00297 FSFS. 7.0 00298 FSFS 7 7. 9.0 00299 FSFS7 8 8. 9.0 0000 FSFS8 9 9. 000 FSFS9 0 0. 0002 FSFS0 2 2. 0022 FSFS2. 2 002 FSFS. 28.0 002 FSFS 8
FasNSeal Support lamp Vent D Product Part.0. 000 FSL.0. 00 FSL.0. 002 FSL. 00 FSL 7 7.0. 00 FSL7 8 8.0. 00 FSL8 9 9.0. 00 FSL9 0 0.0. 007 FSL0 2. 008 FSL2.0. 009 FSL. 0029 FSL FasNSeal Wall racket Vent D Product Part.0. 000 FSW.0.0 00 FSW.0. 002 FSW.0 00 FSW 7 7.0. 00 FSW7 8 8.0 00 FSW8 9 9.0. 00 FSW9 0 0.0 7.0 007 FSW0 2 8.0 008 FSW2.0 9.0 009 FSW 0.0 000 FSW FasNSeal Rain ap D Product Part Vent..8.0 002 FSR. 8.9.0 002 FSR.8..0 0027 FSR.8..0 0028 FSR 7 7.8.8.0 0029 FSR7 8 8.8 8.0.0 000 FSR8 9 0.0 20..0 00 FSR9 0.0 22..0 002 FSR0 2.0 27.0.0 00 FSR2.0..0 00 FSR 7.0.0 00 FSR D VERTIL VENTING FasNSeal Storm ollar Vent D Product Part.0 009 FS.0 009 FS.0 009 FS 0097 FS 7 7.0 0098 FS7 8 8.0 0099 FS8 9 9.0 0090 FS9 0 0.0 0092 FS0 2 009 FS2.0 009 FS 0098 FS 9
FasNSeal Roof Jack (use with Variable Pitch Roof Flashing) VERTIL VENTING DPTERS ccommodates Flat to 9/2 Pitch Vent D Product Part.0 8.0 009 FSVRJ.0 8.0 0092 FSVRJ 8.0 009 FSVRJ 7.0 8.0 009 FSVRJ 7 8.0 8.0 009 FSVRJ7 8 9.0 8.0 009 FSVRJ8 9 0.0 8.0 0097 FSVRJ9 0.0 8.0 0098 FSVRJ0 2.0 8.0 0099 FSVRJ2.0 8.0 00920 FSVRJ 7.0 8.0 0092 FSVRJ FasNSeal Variable Pitch Roof Flashing Vent D Product Part.0 7.0 00922 FSVPF 7.0 0092 FSVPF 7.0 7.0 0092 FSVPF 8.0 7.0 0092 FSVPF 7 9.0 7.0 0092 FSVPF7 8 0.0 7.0 00927 FSVPF8 9.0 7.0 00928 FSVPF9 0 7.0 00929 FSVPF0 2.0 7.0 0090 FSVPF2 7.0 009 FSVPF 8.0 7.0 0092 FSVPF FasNSeal Tapered Increaser D Product Part.9 00700 FS00TI.9 0070 FS00TI Increasers can be ordered to adjoin any size combination of pieces. Stepped increasers and reducers are available by special order. all customer service at.800.7.7 FasNSeal Tapered Reducer D Product Part.9 00809 FS00TR.9 00807 FS00TR Reducers can be ordered to adjoin any size combination of pieces. FasNSeal Universal ppliance dapter D Product Part Vent. 0082 FSU. 0082 FSU. 0082 FSU. 00827 FSU 7. 00828 FSU7 8. 00829 FSU8 9. 0080 FSU9 0. 008 FSU0 2. 0082 FSU2. 008 FSU. 008 FSU 0
KIT OMPONENTS FOR EILING MOUNTED HETERS Universal ppliance dapter 2-2 Vent Lengths Wall Thimble with djustable Vent Length Termination Tee Vent Product Part 0082 FSMK KIT OMPONENTS VENT LENGTH DJUSTLE VENT LENGTH Vent Effective Product Part Dia. Length Number Number - 00277 FSUVLK - 00279 FSUVLK HORIZONTL TERMINTION ULTIMTE DJUSTLE VENT LENGTH FasNSeal Variable Pitch Flashing Kit Flat to 9/2 Vent Product Part 00 FSVPK 002 FSVPK 00 FSVPK 00 FSVPK 7 00 FSVPK7 8 00 FSVPK8 9 007 FSVPK9 0 008 FSVPK0 2 009 FSVPK2 0070 FSVPK 007 FSVPK djusts From 2. to 8.0 KIT OMPONENTS Wall Thimble with Termination Telescoping Elbow ppliance dapter ompatible with most osch wall mounted water heaters djusts from 2.0 to. KIT OMPONENTS Rain ap Storm ollar Roof Jack Roof Flashing Vent Product Part 007 FSWMK ompatible with most.o. Smith, Noritz, State, Takagi & Wai Wela wall mounted water heaters Vent Product Part 008 FSWMK VERTIL TERMINTION WLL MOUNTED OILERS ND WTER HETERS VENT KITS FasNSeal Degree Elbow with FasNSeal Tee Vent Eff. Dia. Lgth 7 8 9 0 2 8.8 9. 0.. 2.2..9.8. 7. 8.8 MULTI PRT REFERENE HRT Two FasNSeal Degree Elbows Vent Dia. 7 8 9 0 2..9.2..7.. 7.2 7.8 8..0.8 2..2.9.. 7. 8.8 20.2 FasNSeal 90 Degree Elbow with FasNSeal Tee Vent Eff. Dia. Lgth 7 8 9 0 2 8.9 9.9 0.9.9 2.9 9.9.9.9 7.9 9.9 2.9 Two FasNSeal 90 Degree Elbows Vent Dia. 7 8 9 0 2 9.8 0.8.8 2.8.8.8.8.8 8.8 20.8 22.8 ustomer Support PTS prides itself on providing the best customer service and marketing support in the industry. Our ustomer Support Team is available to answer technical questions, set up training seminars, request literature and assist with marketing plans. Please e-mail us at support@protechinfo.com or call.800.7.7, Monday- Friday, eastern-standard time. Website onvenience The PTS website offers information about products that directly effect consumer safety and efficient performance of heating equipment. It is complete with a literature library, allowing the download of brochures, technical specifications and installation instructions. Users should be aware that all information is copyrighted and may not be reproduced or altered without written consent from PTS. Marketing Support Our Marketing Department is here to help all of us succeed. We have a large selection of literature, direct mail postcards, ad slicks, promotional t-shirts, hats and much more. Take advantage of our co-op advertising program and we ll even help you design the ad, target a direct mail project or come up with creative sales promotions. all us anytime to request free literature and discuss marketing opportunities available to you. Training PTS offers a variety of technical and sales training opportunities specializing in venting applications for heating appliances, chimney liners and codes & standards. We will be happy to set up training seminars for you, your contractors and your sales force. Please call our ustomer Support Team for details.
No SILIONE needed to install Vent System for ategory II, III, & IV Heating ppliances Engineering Services are provided. all.800.7.7 or engineering@protechinfo.com PRTS LIST ITEM QTY PRT # 2 7 8 9 008 0022 0078 00078 000 00028 000 00 007 9 8 7-0 -9 FETURES L29- superferritic stainless steel Precision TIG-welded butt seam Factory built-in, replaceable gaskets ENEFITS Recognized by the G as the material of choice. Excellent corrosion resistance and structural strength. Seams on vent lengths & components are smooth both inside and out. Gas & water-tight. System can be taken apart & reassembled quickly. No silicone, no cure time, no mess. Installs in half the time. NTS /0/200 DRWN Y: D. Glass SMPLE of YOUR PROJET PROJET NME 00 South Pearl St. lbany, NY 2202.800.7.7 www.protechinfo.com PROTEH SYSTEMS, IN. 2 2. INSTLL WLL RKET FTER EVERY TWELVE (2) FEET OF VERTIL RUN. USE NON-OMUSTLE HNGER STRPS TO SUPPORT THE VENT SYSTEM EVERY SIX () FEET. REFER TO THE FasNSeal INSTLLTION INSTRUTIONS FOR DDITIONL REQUIREMENTS This is a sample submittal drawing. The actual layout, parts list, and dimensions will vary depending on the requirements of your specific project.. TYPIL OF (2) SYSTEMS GENERL NOTES Factory built-in locking band Wall Thimble with built-in djustable Vent Length Standard djustable Vent Length Proven track record Line up seams to line up clamps for easy installation. No cumbersome tabs. No external clamps to lose. Wall Thimble allows for built-in horizontal adjustablity. No need to cut pipe. Provides 2-2 of vertical or horizontal adjustment for easy system pitching. Tested and listed by Underwriters Laboratories, Inc. to UL 78 & UL-S. Tested and approved by heating equipment manufacturers. year warranty. FasNSeal is a Heating ontractor s Dream ome True Simply slide FasNSeal parts together, tighten the Faslamps and fire up the appliance immediately. You get a clean and professional job that is done NOW! vailable in - Diameters In Single & Double Wall FSVRJ Roof Jack learance FSR Rain ap FS Storm ollar FSVPF Variable Pitch Roof Flashing or FSVPK Variable Pitch Roof Flashing Kit which includes FSR, FS, FSVPF & FSVRJ Sample drawings feature product and part numbers Max. FSFS Firestop/Flat Flashing FSL Support lamp 00 South Pearl Street lbany, NY 2202 8..728 Fax: 8..27.800.7.7 sales@protechinfo.com www.protechinfo.com FSUD Universal ondensate Drain or FSHDT Horizontal Drip Tee FSEL900 90 Degree Elbow FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL00 Standard Vent Lengths or FSVL 8 djustable Vent Length ppliance To Drain, Dispose of ondensation ccording to Local odes Support Hangers FSU. Long Universal ppliance dapter or FS-WM 2 Long Unversal ppliance dapter FSWT Wall Thimble Min. learance FSTT Termination Tee or FSS ird Screen FSFS Firestop/Flat Flashing FSUD Universal ondensate Drain To Drain, Dispose of ondensation ccording to Local odes hase Requires learance to ombustibles ppliance FSVL0 FSVL20 FSVL80 FSVL20 FSVL0 FSVL00 Standard Vent Lengths or FSVL 8 djustable Vent Length FSU. Long Universal ppliance dapter or FS-WM 2 Long Unversal ppliance dapter 200 No.8 (rev. 2/200) SIDE WLL INSTLLTION VERTIL INSTLLTION