KW Hydraulic Tools by Adnan F. H. Sabbubeh
HS-85-G HS-85-G Hydraulic Cable Cutter for steel armed copper and aluminum cable incl. steel case, green (RAL6018) Diameter: 85 mm Cutting force: 60 kn
KT-52 / KT-62-HD Ratched Cable Cutters Series KT extreme solid KT-52 up to 52 mm (one hand operated) KT-62-HD up to 62 mm KT-80 up to 80 mm
K-xxxxxxxxxx Ratched cable cutters with special function For cutting single-strand, multi-strand and fine-wire aluminium and copper cables Also for lead-coated cables (only D60 and D100) Ratchet action for high cutting performance Telescope arms adjust to a range of lengths Cutter can be opened in any cutting position Can be used in cramped situations as well as overhead Not for steel wire or wire cable
SSA-120-G-FHP-M SSA-95-S-FHP-M Hydraulic Life Line Cable Cutter For mild steel sheet armed copper and aluminum cable low and medium voltage 10 meter insulated hydraulic hose one earth bond unit steel case, green (RAL6018)
SSA-120-G-FHP-M SSA-120-G-FHP-M Hydraulic Life Line Cable Cutter For steel armed copper and aluminum cable 10 meter insulated hydraulic hose one earth bond unit steel case, green (RAL6018)
SA-120-G-SET-EHP-SE SA-120-G-SET-EHP-SE - S-120-G Cable Cutter with fixed 10 meter insulated hydraulic hose (700BAR) - EHP-SE-V230/60Hz-700BAR electric hydraulic pump with remote control - earth bond (1x) - steel case, green (RAL6018) for cutter with hose (KOFFER-SSA-GRÜN)
SA-160-G-SET-EHP-SE SA-160-G-SET-EHP-SE - S-160-G Cable Cutter with fixed 10 meter insulated hydraulic hose (700BAR) - EHP-SE-V230/60Hz-700BAR electric hydraulic pump with remote control - earth bond (1x) - steel case, green (RAL6018) for cutter with hose (KOFFER-SSA-GRÜN)
HP-131-C38-SET-KSA o Ideally suited for assembly work. Not recommended for mass assembly o Rotary and opening crimping head o Two-stage hydraulic system reducing the number of pumping o NEW! Piston with mechanical stop. This system prevents damage to the holder of the insets, in case of accidental use without insets o Using with semi-circular dies common to all 120/130 kn tools o Extreme large range of crimping dies o Automatic pressure relief control o Manual backflow anytime possible Incl. 11 x HP-131-C38-SET - HP-131-C38 Hand operated hydraulic crimping tool, 130 kn, opening jaw 38mm - incl. 11 hexagonal dies, acc. DIN46235 (25-300 mm² CU / 25-300 mm² AL) Crimping Width 14 mm, DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, Crimping Width 5 mm, DIN-Sizes: 28, 32 Crimping Width 7 mm, DIN-Sizes: 34 - metal carrying case, green (RAL6018) for dies and tool
P-131-C38-SET-FHP-M Incl. 11 x P-131-C38-SET-FHP-M Hydraulic Crimping Head, 130 kn - incl. 11 hexagonal dies, acc. DIN46235 (25-300 mm² CU / 25-300 mm² AL) Crimping Width 14 mm, DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25 Crimping Width 5 mm, DIN-Sizes: 28, 32 Crimping Width 7 mm, DIN-Sizes: 34 - metal transport case, green RAL6018 - Plastic case for the dies - FHP-2-M Foot Operated Hydraulic Pump with gauge - 3 meter hydraulic hose with quick coupler
P-230-SET-FHP-M 14 x Acc. DIN High flexible steel armed hose up to 1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-230-SET-FHP-M Hydraulic Crimping Head, 230 kn - incl. 14 hexagonal dies acc. DIN46235 (25-630 mm² CU / 25-500 mm² AL) CrimpingWidth 14 mm DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, 28 Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44 - metal transport case, green RAL6018 - FHP-2-M Foot Operated Hydraulic Pump with pressure gauge - 3 meter hydraulic hose with quick coupler
P-230-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-230-SET-EHP Hydraulic Crimping Head, 230 kn at 700 bar - incl. 14 hexagonal dies acc. DIN46235 (25-630 mm² CU / 25-500 mm² AL) CrimpingWidth 14 mm DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, 28 Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44 - metal transport case, green RAL6018 - SCHL3M-KN 3 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-700BAR Electric Hydraulic Pump with remote control
P-540-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-540-SET-EHP Hydraulic Crimping Head, 540 kn at 850 bar - incl. 9 hexagonal dies acc. DIN46235 (240-1000 mm² CU / 240-1000 mm² AL) Crimping Width 14 mm DIN-Sizes: 28 CrimpingWidth 17 mm DIN-Sizes: 32, 34, 38, 42, 44, 52, 58, 60 - metal transport case, green RAL6018 - SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
P-695-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-695-SET-EHP Hydraulic Crimping Head, 600 kn at 850 bar - incl. 5 hexagonal dies acc. DIN46235 (630-1200 mm² CU / 630-1200 mm² AL) Crimping Width 25 mm DIN-Sizes: 44, 52, 58, 60, 62 - metal transport case, green RAL6018 - SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
P-1095-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-1095-SET-EHP Hydraulic Crimping Head, 1000 kn at 850 bar - incl. 5 hexagonal dies acc. DIN46235 (630-1200 mm² CU / 630-1200 mm² AL) Crimping Width 25 mm DIN-Sizes: 44, 52, 58, 60, 62 - metal transport case, green RAL6018 - SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
P-1114-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-1114-SET-EHP Hydraulic Crimping Head, 1000 kn at 850 bar - incl. 14 hexagonal dies acc. DIN46235 (1200-2500 mm² CU / 1200-2500 mm² AL) Crimping Width 25 mm DIN-Sizes: 62, 70, 76, 80, 82 - metal transport case, green RAL6018 - SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
P-1114-SET-EHP Adapter for IZUMI dies
FHP-2-M-SET FHP-2-M-SET - Food Operated Hydraulic Pump, 700 bar - with quick coupler - with pressure gauge - with SCHL3M-KN 3 Meter hydraulic hose with quick couplers - with steel case
EHP-850-SE-230V/60Hz EHP-850-SE-220V/60Hz-700BAR Electric Powered Hydraulic Pump, 850 bar Engine: 220 Volt / 60 Hz, 1100 Watt without remote control, without hose EHP-850-SE-220V/60Hz-700BAR Electric Powered Hydraulic Pump, 850 bar Engine: 220 Volt / 60 Hz, 1100 Watt without remote control, without hose Do not forget to order accessories: FB-1 Hand Cable Remote Control FS-1 Foot Cable Remote Control SCHL3M-KN 3 meter steel armored hydraulic hose with quick coupler
Cable Stripper
Cable Stripper
Cable Stripper UNICUT CABLE STRIPPER Unicut-30 30-85 mm Transport case, peeling blade, 2 stripping blades 30 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual Unicut 40 70-125 mm Transport case, peeling blade, 2 stripping blades 38 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual Unicut 50 110-185 mm (in construction 2018) Transport case, peeling blade, 2 stripping blades 38 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual UNIPOWER-34 Engine for UNICUT Helps to make a smooth surface by long peeling areas.
Cable Grinding Cable sanding machine Application The cable sanding machine is applied to sand the insulation surface of polymer cables. Technical Data * Rated Voltage: 220/230 V 50/60 Hz * Rated power: 500 W * Engine adjustable speed: 1000 2000 / min Scope of delivery * Cable sanding machine * Spanner wrench M 17 * Technical document (various languages) * Safety instruction (various languages) * List of spare parts (English, German and French) * Packaging, plastic toolbox (51 x 26 x 25 cm) Ordering information Part no Type Description Weight (kg) 88964 UPC 2-R Cable sanding machine 8.0 Additional tools (to be ordered separately) Part no Type Description 76094 150 Emery papers, Width 29 mm 76095 180 Emery papers, Width 29 mm 76096 220 Emery papers, Width 29 mm 76098 320 Emery papers, Width 29 mm 62371 400 Emery papers, Width 29 mm Spare parts Part no Description 78867 Driving mechanism 78868 Holder with rollers 78869 Mechanical drive with handle bar Cable and Screen preparation
KW Hydraulik GmbH Hydraulikaggregate und Werkzeuge Koeppelsdorfer Str. 132 96515 Sonneberg Germany Tel. +49 3675 42198 0 info@kw-hydraulik.de www.kw-hydraulik.de EST. AL-KHALEEJ CENTER, 1 ST FLOOR SHOW ROOM NO.74 KING FAHIRD ROAD, OLAYA RIYADH SA 11533 Info@abdaralriyadh.com www.abdaralriyadh.com Phone +966 11 4161482 Fax: +966 11 4629122 Mobile: +966 505 233 618 KINGDOM OF SAUDI ARABIA