PRODUCT RNGE MOBILE Heaters, coolers and air-conditioning
BOUT THE DNTHERM GROUP Control your climate The Dantherm Group is a leading provider of climate control products and solutions. The group companies have more than 60 years of experience in designing and manufacturing high quality and energy efficient equipment for heating, cooling, drying and ventilation for a wide range of mobile and fixed applications. Every year Dantherm Group uses significant resources on product development to stay in the forefront and are constantly adapting the products to changing market demands and legislation. The Dantherm Group has strong brands with well-established market positions in the mobile, pool, commercial/industrial and residential markets. Dantherm Group customers benefit from our comprehensive knowledge base and the experience and expertise that we have gained from more than three million climate control products and solutions sold worldwide. Global reach The Dantherm Group is headquartered in Skive, Denmark and has companies in Norway, Sweden, United Kingdom, Germany, France, Switzerland, Italy, Spain, Poland, Russia, China and United rab Emirates and a global distribution network. In 2016 the Dantherm Group was acquired by the Swedish equity fund Procuritas Capital Investors V LP a strong owner with the ambition to continue the development and growth of the company. 2
INDEX MOBILE TO HET Portable direct oil fired air heaters Low oil pressure... 4 High oil pressure... 5 Portable indirect oil fired air heaters High oil pressure... 6 Portable indirect oil fired air heaters BV 500 With separate Riello oil burner... 8 Portable indirect oil fired air heaters IR-BUS With separate Riello oil burner... 10 Portable indirect oil fired air heaters V-M Ruggedized heaters... 12 TO COOL Mobile air cooling Commercial... 23 Mobile air cooling Industrial... 25 ir-conditioning Commercial... 26 Industrial... 27 Mobile cooling Container cooling... 28 Tent cooling... 31 Direct gas fired air heaters (propane-butane) Hybrid... 13 Mechanic... 14 Electronic... 15 Infrared oil fired heaters Infrared heaters... 16 Hybrid... 17 Compact... 18 High output... 19 Infrared electric heaters Short wave and long wave... 20 Portable air heaters Electric... 21 Ductable electric... 22 3
PORTBLE DIRECT OIL FIRED IR HETERS LOW OIL PRESSURE B 35 B 70 B 100 B 150 B 300 High air flow Optional room thermostat Two oil filters oil tank filter and suction filter Thermally protected motor Electronic flame control with photocell Stainless steel combustion chamber Trolley included for B 100, B 150 and B 300 Oil tank with level indicator Designed for easy handling and transportation Easy maintenance nalog thermostat TH5 with cable 3m, 10m Trolley B 35, B 70 Digital thermostat THD with 5m cable for CED models Construction sites Heating roadworks Workshop and warehouse space heating Greenhouses and storage facilities Specifications Units B 35 B 70 B 100 B 150 B 300 kw 10 20 29 44 44/88 Heating power Btu/h 34,200 68,300 99,300 150,500 150,500-301,000 kcal/h 8,600 17,200 25,000 37,900 37,900-75,800 ir flow m 3 /h 280 400 800 900 900/1,800 Fuel autonomy h 16 10 16 10 23/12 Thermostat control nalog or digital nalog or digital nalog or digital nalog or digital nalog or digital Fuel consumption kg/h 0.8 1.6 2.3 3.5 3.5/7 Power supply V/Hz 220/240/50-60 220/240/50-60 220/240/50-60 220/240/50-60 220/240/50-60 Electric power kw 0.08 0.18 0.23 0.28 0.28/0.56 Rated current 0.35 0.8 1.0 1.2 1.2/2.4 Protection IP41 IP41 IP41 IP41 IP41 Tank capacity l 15 19 44 44 105 Product size (l x w x h) mm 745 x 300 x 405 745 x 300 x 405 1075 x 600 x 480 1075 x 600 x 480 1240 x 670 x 640 Weight kg 14 15 25 25 53 Dual voltage No No vailable vailable No 4
PORTBLE DIRECT OIL FIRED IR HETERS HIGH OIL PRESSURE TO HET B 180 B 230 B 360 nalog thermostat TH5 with cable 3m, 10m Fuel pre-heater B 180 B 230, B 360 Optional room thermostat Optional fuel pre-heater Overheat thermostat Post ventilation Thermally protected motor Transparent external suction filter Three oil filters oil pump filter, suction filter and inlet filter Electronic flame control with photocell Stainless steel combustion chamber Oil tank with level indicator Trolley included Snorkel Easy maintenance with external pump Diagnostic LED Digital thermostat THD with 5m cable for CED models Construction sites and heating roadworks Workshop and warehouse space heating Greenhouses and storage facilities Specifications Units B 180 B 230 B 360 kw 48 65 111 Heating power Btu/h 165,000 222,000 379,000 kcal/h 41,200 56,000 95,460 ir flow m 3 /h 1,550 3,000 3,300 Fuel autonomy h 8 10 10 Thermostat control nalog or digital nalog or digital nalog or digital Fuel consumption kg/h 3.8 5.2 8.83 Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50-60 Electric power kw 0.3 0.8 1.06 Rated current 1.5 3.5 4.6 Protection IP41 IP41 IP41 Tank capacity l 36 65 105 Product size (l x w x h) mm 1165 x 380 x 550 1235 x 575 x 790 1600 x 700 x 940 Weight kg 30 57 84 5
PORTBLE INDIRECT OIL FIRED IR HETERS HIGH OIL PRESSURE BV 77 BV 110 BV 170 BV 290 Clean hot air Duct connection Flue gas exhaust Heat exchanger Optional room thermostat Optional fuel pre-heater Overheat thermostat Post ventilation Thermally protected motor Transparent external suction filter Three oil filters oil pump filter, suction filter and inlet filter Electronic flame control with photocell Stainless steel combustion chamber Oil tank with level indicator Trolley included Snorkel Easy maintenance with external pump Diagnostic LED Construction sites and heating roadworks Workshop and warehouse space heating griculture Events and military and emergency space heating Specifications Units BV 77 BV 110 BV 170 BV 290 kw 21 34 49 85 Heating power Btu/h 68,300 112,800 160,400 276,300 kcal/h 17,200 28,400 40,400 69,600 ir flow m 3 /h 1,550 1,800 1,800 3,300 Fuel autonomy h 19 21 14 13 Thermostat control nalog or digital nalog or digital nalog or digital nalog or digital Fuel consumption kg/h 1.67 2.71 3.9 6.8 Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50-60 Electric power kw 0.3 0.8 0.8 1.06 Rated current 1.5 3.5 3.5 4.6 Protection IP41 IP41 IP41 IP41 Tank capacity l 36 65 65 105 Flue tube Ø mm 120 150 150 150 Blast opening Ø mm 230 340 340 400 Product size (l x w x h) mm 1130 x 380 x 660 1235 x 575 x 1000 1350 x 575 x 1000 1600 x 700 x 1150 Weight kg 33 61 65 100 Dual voltage vailable No vailable vailable 6
PORTBLE INDIRECT OIL FIRED IR HETERS HIGH OIL PRESSURE TO HET nalog thermostat TH5 with cable 3m 10m Digital thermostat THD with 5 m cable for heaters made in Oct 2015 or later Fuel pre-heater BV 77 BV 110, BV 170, BV 290 Flexible tubes - 1-way outlet BV 77 - Ø 305mm - 3m BV 77 - Ø 305mm - 7.6m BV 110, BV 170 - Ø 407mm - 7.6m BV 290 - Ø 610mm - 7.6m daptor ring kit BV 77 - Ø 294mm BV 110, BV 170 - Ø 400mm BV 290 - Ø 600mm 2-way outlet BV 110, BV 170-2 x Ø 310mm BV 290-2 x Ø 410mm Flexible tubes - 2-way outlet BV 110, BV 170 - Ø 305mm - 7.6m BV 290 - Ø 407mm - 7.6m Rain cover IP 44 BV 77 BV 110, BV 170 BV 290 Master rain cover increases static IP protection to a value of IP44 Flexible tubes white BV 77 - Ø 305mm - 7.6m BV 110, BV 170 - Ø 407mm - 7.6m BV 290 - Ø 610mm - 7.6m ir recycling kit BV 110, BV 170 BV 290 Stainless steel exhaust-pipe 1m BV 77 - Ø 120mm BV 110, BV 170, BV 290 - Ø 150mm Stainless steel exhaust elbow 90 BV 77 - Ø 120mm BV 110, BV 170, BV 290 - Ø 150mm Stainless steel chimney pot BV 77 - Ø 120mm BV 110, BV 170, BV 290 - Ø 150mm B H C D IR INLET Ø INLET DPTOR Ø OUTLET OUTLET RECYCLING HETER HOSE HOSE RING KIT HOSE HOSE KIT 4515.553 305mm 4100.826 BV 110 4031.909 407mm 4031.401 4515.553 305mm 4100.826 BV 170 4031.909 407mm 4031.401 4031.401 407mm 4100.825 BV 290 4031.910 610mm 4031.038 IR RECYCLING 7
PORTBLE INDIRECT OIL FIRED IR HETERS BV 500 WITH SEPRTE RIELLO OIL BURNER BV 500 13R CENTRIFUGL BV 500 13C XIL Clean hot air Very easy mobility Very low noise (72 db for centrifugal model) Very high air pressure (770 Pa for BV 500 13CR) Flue gas exhaust ltitude compensation adjustment Separate Riello burner with easy nozzle change Easy access to the heat exchanger for cleaning Fuel pre-heating Quick connectors for electrical parts Summer-Winter switch for ventilation only Socket for remote thermostat: analog or digital High efficiency heat exchanger Stainless steel combustion chamber Snorkel Robust hook for crane hanging Trolley included BV 500 13C XIL WITH IR RECYCLING KIT ND FLEXIBLE TUBES Construction sites and heating roadworks Workshop and warehouse space heating griculture Events and military and emergency space heating Specifications Units BV 500-13C BV 500-13CR Fan type xial Centrifugal Total air pressure Pa 443 770 Ductability m 30 50 ir flow m 3 /h 7,700 5,000 Power fan motor W/rpm 1,500/2,750 2,000/1,600 ir outlet diameter 2 of 12" (300mm) or 1 of 16" (400mm) 2 of 12" (300mm) or 1 of 16" (400mm) Maximum heating power kw/btu/h/kcal/h 150/500,000/126,000 150/500,000/126,000 Standard heating power kw/btu/h/kcal/h 117/400,000/101,000 117/400,000/101,000 Maximum air temperature C 95 95 Summer ventilation Yes Yes Remote thermostat nalog or digital nalog or digital Flue tube mm 150 150 Protection IP IP 43 IP 43 Fuel tank capacity l 150 150 Max. fuel consumption l/h 13.32 13.32 Standard fuel consumption l/h 12.19 12.19 Rated current 13 14 Power supply V/Hz 220-240/1ph/50-60 220-240/1ph/50-60 Weight kg 224 230 Product size (l x w x h) mm 2086 x 717 x 1233 2086 x 717 x 1233 8
PORTBLE INDIRECT OIL FIRED IR HETERS BV 500 WITH SEPRTE RIELLO OIL BURNER TO HET BV 500 has standard 2 outputs diameter 300mm (12"). BV 500 can accept 1 way outlet diameter 400mm (16") option Large pneumatic wheels, forklift slots, robust rotomoulded plastic tank. Windows which allow an easy access to the heat exchanger for cleaning. Welding performed by robots and 100% inspected. The motor is connected to the electronic panel with a snap-on connector, allowing an easy maintenance. The heater gets the fuel from the tank below but can also be connected to an external tank. Fuel filter is outside. Fuel pre-heater is inside, within the combustion head. When required, in case of relevant change of altitude, it is very easy to adjust the combustion. IP67 Waterproof Control Panel and Electrical Circuit. This includes: on/off button, ventilation mode. Reset button, socket for remote thermostat: analog or digital. leakless fuel tank closure and a big fuel level indicator. nalog thermostat TH5 with cable 3m 10m Digital thermostat THD with 5m cable 1-way outlet Ø 400mm Fuel line 4m (are required 2 pieces per 1 unit, supply line and return line) Flexible ducts 1-way outlet 7.6m 15m 2-way outlet 7.6m (possible to connect to each other - max. 30m) Fuel scoop ir recycling kit for BV 500 xial BV 500 ir recycling for BV 500 centrifugal Use 2 tubes - 2 x Ø 300mm 9
PORTBLE INDIRECT OIL FIRED IR HETERS IR-BUS WITH SEPRTE RIELLO OIL BURNER vailable version with 4 or with 1 outlets BV 310 BV 470 BV 690 Clean hot air Optional room thermostat vailable with 4, 2 or 1 outlets Flue gas exhaust Separate Riello burner Summer-Winter switch for ventilation only Fuel pre-heating Electronic flame control with photocell Fan-limit thermostat with automatic reset Limit thermostat with manual reset Two oil filters oil pump filter and suction filter Fuel pre-heat filter included High efficiency heat exchanger Stainless steel combustion chamber Trolley included On request gas burner instead of oil burner For applications see page 8 Specifications Units BV 310FS BV 470FS BV 690FS BV 690FT kw 75 134 220 220 Heating power Btu/h 256,000 460,000 751,000 751,000 kcal/h 64,500 115,000 190,000 190,000 ir flow m 3 /h 4,400 8,000 12,500 12,500 Fan type xial xial xial xial Thermostat control nalog or digital nalog or digital nalog or digital nalog or digital Fuel consumption kg/h 6.4 11.3 17.5 17.5 Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50 400/3ph/50 Electric power kw 1.1 2.03 3.68 3.4 Rated current 6.2 8.8 16 5.8 Protection IP43 IP43 IP43 IP43 Flue tube Ø mm 150 200 200 200 ir outlet diameter mm 1 x 450 4 x 270 4 x 320 4 x 320 1 x 600 1 x 700 1 x 700 Product size (l x w x h) mm 1654 x 750 x 1092 2230 x 875 x 1215 2340 x 998 x 1548 2340 x 998 x 1548 Weight kg 162 225 326 333 10
PORTBLE INDIRECT OIL FIRED IR HETERS IR-BUS WITH SEPRTE RIELLO OIL BURNER TO HET On request: Radial fan version is available nalog thermostat TH5 with cable 3m 10m Digital thermostat THD with 5m cable For heaters made in July 2015 or later Top outlet BV 310 BV 470 BV 690 Fuel tank BV 310 85 l BV 470 140 l BV 690 200 l Fuel line 4m (are required 2 pieces per 1 unit, supply line and return line) Fuel scoop 1-way outlet BV 310 - Ø 440mm BV 470 - Ø 600mm BV 690 - Ø 700mm 2-way outlet to be applied on 1-way outlet BV 310 2 x Ø 315mm BV 470 2 x Ø 400mm BV 690 2 x Ø 500mm 4-way outlet BV 310 4 x Ø 225mm BV 470 4 x Ø 270mm BV 690 4 x Ø 320mm Flexible 7.6m ducts 4-way outlet BV 310 Ø 230mm BV 470 Ø 305mm BV 690 Ø 330mm 2-way outlet BV 470 Ø 407mm BV 690 Ø 508mm 1-way outlet BV 310 Ø 450mm BV 470 Ø 610mm BV 690 Ø 710mm Perforated tubes BV 310 Ø 509mm - max. 25m BV 470 Ø 611mm - max. 50m BV 690 Ø 713mm - max. 50m Connection kit for 1-way outlet BV 310 Ø 509mm BV 470 Ø 611mm BV 690 Ø 713mm Caster BV 310 BV 470 BV 690 ir recycling kit BV 310 BV 470 BV 690 Fire damper BV 310 Ø 450mm BV 470 Ø 560mm BV 690 Ø 710mm Mounting kit for chimney 200mm BV 310 chimney Ø 150mm BV 470, BV 690 chimney Ø 200mm 11
PORTBLE INDIRECT OIL FIRED IR HETERS V-M RUGGEDIZED HETERS V-M15MKII V-M40MKII Remote thermostat with cable, 15m Remote CO monitor with cable, 15m Insulated, flexible air duct, Ø225x3000mm with spigot Storage bag for flexible duct Ø225mm ir distribution ducts, Ø225x6000mm lternatively fuel lance for oil drum Can operate at temperatures down to -40 C Creates a comfortable working environment Equipment and transportation such as helicopters stay warm and ready for use, reducing wear and tear and ensuring quicker response times Reliable and virtually maintenance free Easy to transport, even over ice and snow Can be set up by one person without the use of tools, and is easy to operate Developed in close collaboration with the armed forces of NTO countries Chosen as the NTO standard, conforming to all NTO requirements and norms ll units are allocated NTO stock numbers (NSN) Tents ccommodation Field hospitals Military camps Relief camps Temporary buildings Specifications Units V-M15MKII V-M40MKII Operating temperature range Heat output ir flow Sound level Max. fuel consumption Power supply Max. power consumption ir discharge temperature Flex duct connection Product size (h x l x w) Weight C kw m 3 /h db() l/h V/Hz W C Ø mm mm kg -40 - +25 17.9 1080 60 1.7 230/1ph/50 1000 80 225 605 x 1360 x 490 93-40 - +30 38 2200 60 3.6 230/1ph/50 1055 80 225 890 x 1400 x 700 129 12
DIRECT GS FIRED IR HETERS (PROPNE-BUTNE) HYBRID Ventilation of the room is necessary to prevent a deficiency in oxygen supply. TO HET BLP 17M DC Included 40 MINUTES CHRGE 3h Master lithium accu: 8 hours run-time More than 1000 recharges Master accu charger: 40 minutes charging time Power adapter for 220V and 110V 8 HOURS RUN-TIME It works with a cord and high tension (110-240V) or cordless with lithium battery 14V It is equipped with DC brushless motors and electronic board for power management which allow very low energy consumption only 10% of a conventional C heater Equipped with Master Lithium Battery BT3 Power adapter for 220 V C or 110 V C included for constant operation Manual ignition Regulator includes safety valve which stops the gas flow in case of cracks of the gas tube Regulator and gas hose included Motor with thermal protection Overheat thermostat djustable heat 8 hours battery run-time and 40 minutes charge time Construction sites and renovations Workshops and warehouses griculture Specifications Units BLP 17M DC kw 10-16 Heating power Btu/h 34,200-54,800 kcal/h 8,600-13,800 Pressure bar 0.7 Ignition Manual Battery run-time h 8 Thermostat control No ir flow m 3 /h 300 Fuel consumption kg/h 1.16 Power supply V/Hz 110-240/1ph/50-60 or 14 V lithium accu Electric power kw 0.005 Rated current 0.4 Product size (l x w x h) mm 471 x 188 x 293 Weight kg 4 Dual voltage Yes 13
DIRECT GS FIRED IR HETERS (PROPNE-BUTNE) MECHNIC Ventilation of the room is necessary to prevent a deficiency in oxygen supply. BLP 17M BLP 33M BLP 53M BLP 73M Controls for adjusting heat and consumption Multiple bottles coupling set DE/T/DK/NL/PL: Gas hose Gas regulator ES/HR/SI/CZ/HU/FR/CH/BE/SK/YU/B/RO/BG/LT/LV/ EE/B/RU: Gas hose Gas regulator Manual ignition Electrovalve Safety gas valve with thermocouple Regulator includes safety valve which stops the gas flow in case of cracks of the gas tube Regulator and gas hose included Motor with thermal protection Overheat thermostat djustable heat Easy maintenance Construction sites and renovations Workshops and warehouses griculture Specifications Units BLP 17M BLP 33M BLP 53M BLP 73M kw 10-16 18-33 36-53 49-73 Heating power Btu/h 34,200-54,800 61,500-112,800 123,000-181,000 167,100-249,300 kcal/h 8,600-13,800 15,500-28,400 31,000-45,600 42,100-62,800 Pressure bar 0.7 0.75-1.5 0.75-1.5 0.75-1.5 Ignition Manual Manual Manual Manual Thermostat control No No No No ir flow m 3 /h 300 1,000 1,450 2,300 Fuel consumption kg/h 1.16 2.4 3.78 5.02 Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50 Electric power kw 0.053 0.06 0.11 0.218 Rated current 0.23 0.26 0.48 0.95 Product size (l x w x h) mm 471 x 188 x 293 552 x 220 x 342 605 x 276 x 444 685 x 276 x 444 Weight kg 4.5 7.5 13 15 Dual voltage No vailable vailable vailable 14
DIRECT GS FIRED IR HETERS (PROPNE-BUTNE) ELECTRONIC Ventilation of the room is necessary to prevent a deficiency in oxygen supply. BLP 33ET BLP 53ET BLP 73ET TO HET nalog thermostat TH5 with cable 3m 10m BLP 103ET Multiple bottles coupling set DE/T/DK/NL/PL: Gas hose Gas regulator ES/HR/SI/CZ/HU/FR/CH/BE/SK/YU/B/RO/BG/LT/LV/EE/B/RU: Gas hose Gas regulator Digital thermostat THD with 5m cable Electronic ignition Double electrovalve The ionization electrode continuously checks the presence of the flame Optional room thermostat BLP 103ET trolley included Regulator includes safety valve which stops the gas flow in case of cracks of the gas tube Regulator and gas hose included Motor with thermal protection Overheat thermostat djustable heat Strong and durable construction Easy maintenance Construction sites and renovations Workshops and warehouses griculture Specifications Units BLP 33ET BLP 53ET BLP 73ET BLP 103ET kw 18-33 36-53 49-73 57-103 Heating power Btu/h 61,500-112,800 123,000-181,000 167,100-249,300 194,500-351,700 kcal/h 15,500-28,400 31,000-45,600 42,100-62,800 49,000-88,600 Pressure bar 0.75-1.5 0.75-1.5 0.75-1.5 0.75-2.0 Ignition Electronic Electronic Electronic Electronic Thermostat control nalog or digital nalog or digital nalog or digital nalog or digital ir flow m 3 /h 1,000 1,450 2,300 3,260 Fuel consumption kg/h 2.4 3.78 5.02 6.66 Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50 Electric power kw 0.074 0.126 0.23 0.23 Rated current 0.32 0.55 1.00 1.00 Product size (l x w x h) mm 552 x 220 x 342 605 x 276 x 444 685 x 276 x 444 895 x 324 x 624 Weight kg 7.5 13 15 22.3 15
I N F R R E D O I L F I R E D H E T E R S I N F R R E D H E T E R S Similar to the sun, short-wave infrared radiation heats the objects without heating the air. Once objects (or walls) are penetrated with heat, they can also radiate and heat other objects. Infrared radiation heats through fog or wind. Infrared radiation runs straight, unlike hot air which flows upwards. Infrared heaters are an excellent solution for: Heating objects, bodies or walls indoors and outdoors Drying plaster walls as infrared heat penetrates the wall and evaporates the humidity of the wall from inside, unlike an air flow heater which creates a dry surface trapping the humidity into the wall Saving energy, because less energy is required for achieving the same heating effect INFRRED HETERS HET OBJECTS IR FLOW HETERS HET IR (ND OBJECTS) 0.9m 1.8m 2.7m 0.9m 1.8m 2.7m SIDE VIEW 1.2m 0.6m XL 9 or XL 91 I R F LO W H E T E R 1.8m 1.8m 0.9m 0.9m 0.9m 0.9m 1.8m 1.8m TO P V I E W 16
INFRRED OIL FIRED HETERS HYBRID Ventilation of the room is necessary to prevent a deficiency in oxygen supply. TO HET DC 61 Construction sites and renovations Workshops and warehouses griculture It works with lithium battery pack or with a cord 14 V only offers the highest electrical safety Equipped with Master Lithium Battery BT6 On board power adapter valid from 110V to 220V C included Low noise Infrared heating (short wave) No air flow Electronic flame control with photocell Post-ventilation Standard oil level indicator ILME socket for remote thermostat: analog or digital Suction filter and inlet filter Snorkel Overheat thermostat nti-tilt switch 6h Master lithium battery pack: 4 hours run-time. More than 1000 recharges. Master battery pack charger nalog thermostat TH5 with cable 3m 10m Digital thermostat THD with 5m cable Specifications Units DC 61 kw 17 Heating power Btu/h 58,000 kcal/h 14,600 Fuel consumption kg/h 1.35 Fuel autonomy h 7 Thermostat control nalog or digital Electric power kw 0.2 Power supply V/Hz 110-240/1ph/50 Rated current 1 Tank capacity l 11 Product size (l x w x h) mm 560 x 345 x 575 Weight kg 19 T mbient 20 C 0.5m 1m 1.5m DC 61 110 C 50 C 20 C 17
INFRRED OIL FIRED HETERS COMPCT Ventilation of the room is necessary to prevent a deficiency in oxygen supply. XL 61 XL 61 with trolley Low noise Infrared heating (short wave) No air flow Electronic flame control with photocell Standard oil level indicator ILME socket for remote thermostat: analog or digital Suction filter and inlet filter Snorkel Overheat thermostat nti-tilt switch Display and socket for remote thermostat Construction sites and renovations Workshops and warehouses griculture Trolley Manometer nalog thermostat TH5 with cable 3m 10m Digital thermostat THD with 5m cable Specifications Units XL 61 kw 17 Heating power Btu/h 58,000 kcal/h 14,600 Fuel consumption kg/h 1.35 Fuel autonomy h 7 Thermostat control nalog or digital Electric power kw 0.2 Power supply V/Hz 220-240/1ph/50 Rated current 0.85 Tank capacity l 11 Product size (l x w x h) mm 560 x 345 x 575 Weight kg 19 110 V vailable T mbient 20 C 0.5m 1m 1.5m XL 61 110 C 50 C 20 C 18
INFRRED OIL FIRED HETERS HIGH OUTPUT Ventilation of the room is necessary to prevent a deficiency in oxygen supply. TO HET XL 9SR Low noise Infrared heating (short wave) No air flow Electronic flame control with photocell Oil level indicator Optional room thermostat Oil pump filter, suction filter and inlet filter Snorkel (XL 91) djustable direction/tilting Trolley included XL 91 Construction sites and renovations Workshops and warehouses griculture Fuel pre-heater nalog thermostat TH5 with cable 3m 10m Digital thermostat THD with 5m cable (for XL 91 only) Manometer Specifications Units XL 9SR XL 91 kw 29 43 29 43 Heating power Btu/h 99,300 146,900 99,300 146,900 kcal/h 25,000 37,000 25,000 37,000 Fuel consumption kg/h 2.3 3.37 2.3 3.37 Fuel autonomy h 21 14 21 14 Thermostat control nalog nalog or digital Electric power kw 0.16 0.19 Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 Rated current 0.7 0.7 Tank capacity l 60 60 Product size (l x w x h) mm 1070 x 700 x 980 710 x 970 x 990 Weight kg 69 69 110 V vailable vailable 19
INFRRED ELECTRIC HETERS SHORT WVE ND LONG WVE TS 3 LONG WVE HLL 1500 SHORT WVE Stand for HLL 1500 HLL 3000 SHORT WVE T mbient 20 C 0.5m 1m 1.5m 2m TS 3 70 C 45 C 35 C 30 C HLL 1500 70 C 45 C 35 C 28 C THLL 3000 85 C 50 C 40 C 30 C No noise Infrared heating No air flow Instant heat No oxygen consumption No fumes, no dust, no odours, no humidity 100% efficiency Short wave light Life of the lamps 5,000 hours Not blinding golden lamps Close environments Warehouses, workshops and garages griculture Construction Homes and offices Painters, plasterers, tile setters, plumbers, etc Specifications Units TS 3 HLL 1500 HLL 3000 kw 0.8-1.6-2.4 1.5 1.5/3.0 Heating power Btu/h 2,700-5,500-8,200 5,100 5,100-10,200 kcal/h 690-1,380-2,070 1,290 1,290-2,580 Infrared radiation Long wave Short wave Short wave Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 220-240/1ph/50 Rated current 10.5 6.5 13.0 Switch on/off Yes Yes Yes Insulating class 1 1 1 Lamp Ceramic infrared Gold Gold Lamp life h No limits 5000 5000 pproximate area m 2 8 6 8 Cable HØ7 HØ7 HØ7 Product size (l x w x h) mm 398 x 413 x495 735 x 650 x 1765 590 x 600 x 870 Weight kg 7.6 4.8 12.0 20
PORTBLE IR HETERS ELECTRIC TO HET B 2 B 3 B 2PTC B 5 B 9 B 15 B 22 utomatic reset Built-in room thermostat No oxygen consumption No fumes, no odours, no humidity Summer-Winter switch for ventilation only Low noise Motor with thermal protection Overheat thermostat djustable heat Extension cord B 5, B 9 5m B 5, B 9 10m B 15, B 22 5m B 15, B 22 10m Construction sites Workshop and warehouse space heating griculture Events and military Homes and offices Cellars Specifications Units B 2PTC B 2 B 3 B 5 B 9 B 15 B 22 kw 1/2 1/2 1.65/3 2.5/5 4.5/9 7.5/15 11/22 Heating power Btu/h 3,400-6,800 3,400-6,800 5,630-11,260 8,530-17,000 515,350-30,700 25,600-51,200 37,530-75,100 kcal/h 860-1,720 860-1,720 1,430-2,860 2,150-4,300 3,870-7,740 6,450-12,900 9,460-18,900 ir flow m 3 /h 97 184 510 510 800 1,700 2,400 Power supply V/Hz 230/1ph/50 230/1ph/50-60 230/1ph/50-60 400/3ph/50 400/3ph/50 400/3ph/50 400/3ph/50-60 Plug (male) from heater side 13/3P 16/3P 16/3P 16/5P 16/5P 32/5P 32/5P Rated current 8.7 8.7 14.5 7.2 13 22 32 Switch pos. 1 1 kw Off Off Off Off Off Off Switch pos. 2 2 kw Fan Fan Fan Fan Fan Fan Switch pos. 3/4 kw - 1.0/2.0 1.65/3.3 2.5/5.0 4.5/9.0 7.5/15 11.0/22.0 Thermostat control Included Included Included Included Included Included Included Temperature range C 0-40 5-35 5-35 5-35 5-35 5-35 5-35 Protection IP21 IP24 IP24 IP24 IP24 IP24 IP24 Product size (l x w x h) mm 200 x 200 x 200 220 x 200 x 330 260 x 260 x 410 310 x 360 x 380 340 x 420 x 440 350 x 470 x 490 350 x 540 x 590 Weight kg 1.9 3.7 5.1 6.4 9.3 15.0 20.0 110 V No No vailable No No No No 21
PORTBLE IR HETERS DUCTBLE ELECTRIC B 18 B 30 nalog thermostat TH5 with cable 3m 10m 2-way outlet B 18 Ø 225mm B 30 Ø 290mm daptor ring kit RS 30, RS 40 R S 30 RS 40 Extension cord B 18 5m B 18 10m B 30, RS 30, RS 40 5m B 30, RS 30, RS 40 10m Flexible ducts 1-way outlet B 18 Ø 305mm 7.6m B 30 Ø 407mm 7.6m B 30 Ø 407mm 15m RS 30 Ø 508mm 7.6m RS 40 Ø 508mm 7.6m Flexible ducts 2-way outlet B 18 2 x Ø 230mm B 30 2 x Ø 305mm Duct connections Large wheels for easy transportation Power cord included Lifting eyelets for easy transport (B 30) Manual reset Built-in room thermostat (RS 40) Optional room thermostat No oxygen consumption No fumes, no odours, no humidity Summer-Winter switch for ventilation only Low noise Motor with thermal protection Overheat thermostat djustable heat For applications see page 21 Specifications Units B 18 B 30 RS 30 RS 40 kw 9/18 15/30 15/30 13/26/40 Heating power Btu/h 30,700-61,400 51,200-102,400 51,200-102,400 44,360-136,500 kcal/h 7,740-15,480 12,900-25,800 12,900-25,800 11,200-34,400 ir flow m 3 /h 1,700 3,500 3,100 3,100 Power supply V/Hz 400/3ph/50-60 400/3ph/50 380-400/3ph/50 380-400/3ph/50 Plug (male) from heater side 32/5P 63/5P 63/5P 63/5P Rated current 26.0 43.5 43.0 58.0 Switch pos. 1 Off Off Off Fan Switch pos. 2 Fan Fan Fan 13 kw Switch pos. 3/4 kw 9/18 15/30 15/30 26/40 Thermostat control Optional TH5 Optional TH5 On board On board Temperature range < 25 < 25 < 25-5 - +35-5 - +35 Protection IP24 IP24 IP20 IP20 Product size (l x w x h) mm 700 x 490 x 530 1030 x 580 x 680 910 x 710 x 800 990 x 710 x 800 Weight kg 27 53 38 46 22
MOBILE IR COOLING COMMERCIL CCX 2.5 ttractive compact design No gas evaporative technology No installation required, low running and maintenance cost Remote control for easy operation Designed for easy handling and transportation Long uninterrupted running time without the need to refill Low noise Ionizer TO COOL Workshops and warehouses Commercial kitchens and restaurants Laundries Greenhouses and farms Offices Hotels & Spas Fitness centres Specifications Units CCX 2.5 Cooling pad dm 3 20 ir flow m 3 /h 2,500 Maximum area m 2 50 Power consumption W 280 Power supply V/Hz 230/1ph/50 Rated current 1.2 Fan speed 3 Outlet versions Front Water consumption l/h 3-7 Tank capacity l 31 Direct water connection inch No Tank level control Yes Sound level db() 67 Product size (l x w x h) mm 430 x 610 x 1170 Weight (without/with water) kg 23/54 23
MOBILE IR COOLING COMMERCIL BC 80 Easy to move on wheels Flaps swing automatically No installation required Eco-friendly no compressor, no gas, very low consumption It renovates and cleans the air from fumes, dust and odours Remote control Ionizer It can perfume the air utomatic water supply BC 60 Workshops and warehouses Commercial kitchens and restaurants Laundries Greenhouses and farms Specifications Units BC 60 BC 80 Cooling pad dm 3 60 70 ir flow m 3 /h 6,000 8,000 Maximum area m 2 150 180 Power consumption W 280 330 Power supply V/Hz 230/1ph/50 230/1ph/50 Rated current 1.2 1.5 Fan speed 3 3 Outlet versions Front Front Water consumption l/h 7 8 Tank capacity l 57 100 Direct water connection inch ½ ½ Tank level control Yes Yes Sound level db() 62 62 Product size (l x w x h) mm 540 x 750 x 1400 500 x 850 1410 Weight (without/with water) kg 35/92 32/92 24
MOBILE IR COOLING INDUSTRIL BC 180 (30") For industrial application use No gas evaporative technology Low noise djustable speed utomatic swing function for BC 180 only Time setting function Large water tank for longer operating hours Large wheels and brake allow easy movement No need for compressed air No installation, no duct work required Easy to use, easy to clean Corrosion resistant plastic casing Easy to maintain utomatic water supply Remote control TO COOL BC 340 (36") Workshops and warehouses Plastic, glass, assembly and painting plants Cow barns Greenhouses Specifications Units BC 180 BC 340 Cooling pad dm 3 180 340 ir flow m 3 /h 15,000 20,000 Maximum area m 2 330 400 Power consumption W 750 1100 Power supply V/Hz 220-240/1ph/50 220-240/1ph/50 Rated current 4.5 4.5 Water consumption l/h 12-18 15-20 Tank capacity l 100 200 Direct water connection inch ½ ½ Tank level control Yes Yes Product size (l x w x h) mm 1130 x 690 x 1640 1580 x 750 x 1820 Weight kg 58 105 25
IR-CONDITIONING COMMERCIL ccessories CT 7 The hex unit features a speed controlled EC fan (non-uk only) that automatically adjusts to differing outside air temperatures so that the CT 7 is always operating at its best efficiency. dditional 5m or 15m line sets (maximum length 30m per unit) Duct spigot kit Cooling capacity of up to 7.0kW @ 28 C/60% RH room, 28 C outside air temperature High efficiency cooling circuit Quick connect cooling line connectors provides easy installation, without the need to recharge water lines Compact outdoor heat exchanger Outdoor heat exchanger with automatically adjusting variable speed EC fan, for high and low temperature environments (non- UK only) Variable indoor unit fan speed and adjustable air outlet grille Peristaltic pumped condensate with 30m head and high level alarm Castor mounted, rugged metal construction Up to 30m installation distance between indoor unit and heat rejection unit R407C refrigerant True air-conditioning without the exhaust air gains associated with exhaust tube units Options Forklift guides Specifications Units CT 7 CT 7 (UK) Performance* Cooling capacity kw 7.0 (max.) 7.0 (max.) Power supply V/Hz 230/1ph/50 230/1ph/50 Fuse 16 13 Nominal running current 11.2 11 Nominal power consumption kw 2.6 2.5 ir flow (variable) m 3 /h 930-1310 930-1310 Sound level @ 3m db() 53 53 Operating range (room) o C 0-35 0-35 Operating range (outdoor) o C 0-40 0-35 Product size (h x w x d) mm 1070 x 852 x 420 1070 x 852 x 420 Hex size (h x w x d) mm 520 x 560 x 280 520 x 560 x 280 Weight kg 117 117 * Outside conditions 28 C/60% RH Rental companies Event organisations Corporate hospitality specialists Data centres and server room cooling Facility management companies Utility companies Retail premises Temporary cold room cooling 26
IR-CONDITIONING INDUSTRIL CT 35 High capacity space chiller Rapid installation and flexibility of positioning No external refrigerant connections required No external ventilation or ductwork to exterior required Fully automatic operation Robust construction Ducted cool air when required Ideal for locations requiring a low temperature storage facility TO COOL Food packing and process areas Factories and workplaces Industrial processes Warehouses storing perishable goods Emergency back-up for cold stores High capacity cooling for social events Specifications Units CT 35 Power supply Starting current Max. running current Min. generator required Product size (indoor) (w x d x h) Weight Product size (outdoor) (w x d x h) Weight V/Hz KV mm kg mm kg 380-415/3ph/50 135 37 30 1730 x 1250 x 1600 497 1196 x 1032 x 1616 360 27
MOBILE COOLING CONTINER COOLING C-M5W C-M5W TRP DOOR Manufactured from hot dip galvanized and powder coated steel sheet Top finish painting is standard NTO green, RL 6014 Can provide cooling at ambient temperatures up to +60 C Scroll compressor for high degree of reliability and low noise HP pressostat switching off the unit at too high ambient temperatures Easily controlled by a room thermostat placed inside the container Two speed selector for the internal fan VENT-only option, allowing ventilation without cooling Built-in fresh air intake Coarse filters in front of internal air intake as well as in front of external air intake and fresh air intake During transport the C-M5W is stored inside the container Trap door system Welding frame for corrugated container Lifting system Containers Specifications Units C-M5W Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 1m Refrigerant Max. cooling capacity Heating capacity (with electric heating element) Power supply (60 Hz available) Max. running current, cooling Max. running current, heating Locked rotor amperage (LR), cooling Generator requirement (300% start allowance) Max. power consumption Product size (h x l x w) Weight C C m 3 /h db() kw kw V/Hz kv kw mm kg 20-60 -32 - +20 700 59 R134a 4.9 2.0 230/1ph/50 9.8 9.3 47 4 2.3 446 x 752 x 630 79 28
MOBILE COOLING CONTINER COOLING C-M5MKII C-M5MKII TRP DOOR Trap door system Welding frame for corrugated container Lifting system Manufactured from hot dip galvanized and powder coated steel sheet When in operation and transportation mode the trap door and C-M5MKII provides an air tight boundary to ambient environment The above qualifies for CBRN/COLPRO compatibility The trap door unit also serves as protection against rain and extreme sun when the unit is operating Provides cooling at ambient temperatures up to +60 C NTO green, IR reflective, BS381C285 optional colours on request Scroll compressor for high degree of reliability and low noise Easy to operate microprocessor to control temperature and comply with EMC military standard Two speed selector for the internal fan VENT-only option, allowing ventilation without cooling Possible to lock the trapdoor with a padlock or positively lock the trapdoor for under-slung transportation by helicopter Containers TO COOL Specifications Units C-M5MKII Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 1m Refrigerant Max. cooling capacity Heating capacity (with electric heating element) Power supply Max. running current, cooling Max. running current, heating Locked rotor amperage (LR), cooling Max. power consumption Product size (h x l x w) Weight C C m 3 /h db() kw kw V/Hz kw mm kg 20-60 -32 - +20 900 49 R134a 4.7 2.0 230/1ph/50 9.8 9.3 47 2.3 482 x 755 x 666 79 29
MOBILE COOLING CONTINER COOLING C-M7C C-M7C CONTROL PNEL Manufactured from hot dip galvanized and powder coated steel sheet No fresh air intake, as to qualify CBRN/COLPRO compliance High ingress protection level The above qualifies for CBRN/COLPRO compatibility Replaceable front grill protecting the condenser coil Provides cooling at ambient temperatures up to +60 C Scroll compressor for high degree of reliability and low noise Easy to operate on-board thermostat displaying current room temperature Two speed selector for the internal fan Bolt-on solution During transport the C-M7C can be shut off or operated if required Optional electric heating element Containers Vehicles Specifications Units C-M7C Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 1m Refrigerant Max. cooling capacity Heating capacity (with electric heating element) Power supply Max. running current, cooling Locked rotor amperage (LR), cooling Max. power consumption Product size (h x l x w) Weight C C m 3 /h db() kw kw V/Hz kw mm kg 22-60 N/ 3000 74 R134a 7.7 N/ 400/3ph/50 7.8 40 4.2 698 x 2457 x 515 197 30
MOBILE COOLING TENT COOLING C 24 The C 24 is built into a cabinet manufactured from 0.9-2.5mm galvanized and powder coated steel sheet Top finish painting is pure white, RL 9010 Cooling at outside temperatures up to +55 C Environmentally friendly R134a refrigerant High/low pressure switch ensuring a long compressor lifespan The unit connects to the mains power supply or to a separate diesel generator via a 10m power cable with a CEE plug Temperature control carried out by a room thermostat hardwired to the air-conditioner Inlet and discharge openings for Ø315mm uninsulated, flexible ducts Easy transportation by either forklift or on the four, mounted wheels (accessory) Setup and operation can be done by a single person TO COOL C 24 WITH WHEELS Lifting handle Wheels ir distribution for internal air distribution Tents Field hospitals UN Relief camps Temporary buildings Specifications Units C 24 Operating temperature range, cooling ir flow Refrigerant Cooling capacity @ 49/49 C 30% RH Power supply Max. current Locked rotor amperage (LR) Max. system pressure Product size (h x l x w) Weight C m 3 /h kw/btu V/Hz bar mm kg 20-55 2180 R134a 6.0/20400 230/1ph/50 16 46 25 1110 x 919.1 x 752.3 160 31
MOBILE COOLING TENT COOLING C-M7MKII ONE OPENING C-M7MKII TWO OPENINGS Remote thermostat with cable, 15m Insulated, flexible air duct Ø315 x 3000mm incl. bag Non insulated, flexible air duct Ø315 x 5000mm Non insulated, flexible air distribution duct Ø315 x 5000mm Non insulated, flexible air distribution extension duct Ø315 x 2000mm Insulated, flexible air duct Ø225x3000mm Storage bag for insulated air duct Ø225 Non insulated, flexible air distribution duct Ø225 x 6000mm Manufactured from hot dip galvanized and powder coated steel sheet Can provide cooling at ambient temperatures up to +55 C Connect to the mains power supply or a separate diesel generator through a 15m power cable with CEE plug VENT-only option, allowing ventilation without cooling Temperature control by a room thermostat placed inside the tent Washable and easy removable coarse filters in front of internal air intake as well as in front of external air intake Easy transportation, either by forklift, the four lifting hooks on top of the unit or with the two wheels Setup and operation can be done by a single person Removable wheels, which can be stowed on top of the unit Tents Field hospitals Military camps Relief camps Temporary buildings Specifications Units C-M7MKII Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 1.5m Refrigerant Max. cooling capacity Heating capacity (with electric heating element) Power supply Max. running current, cooling/heating Locked rotor amperage (LR) Max. power consumption cooling/heating Hose connection Product size (h x l x w) Weight C C m 3 /h db() kw kw V/Hz W Ø mm mm kg 20-55 -20 - +20 2500 69 R134a 7.6 7.2 400/3ph/50 7.2/13 24 3700/7700 1 x 315 or 2 x 225 1150 x 796 x 756 190 32
MOBILE COOLING TENT COOLING C-M11 C-M11 WITH BOOSTER HETER Remote thermostat with 15m cable and auto cooling/heating selection Insulated, flexible air duct Ø315mm x 3m incl. storage bag Uninsulated flexible air duct Ø315mm x 5m incl. storage bag ir distribution air duct Ø315mm x 6m Trolley with wheels 12 kw booster heater F7 filter Designed for optimal utilization of a standard 20" ISO container (30 pcs) The C-M11 is built into a strong metal frame with insulated panels where relevant, powder coated Top finish painting is standard sand colour Option with built in heating will heat when ambient temperature is below 20 C Scroll compressor for a high degree of reliability and low noise level utomatic phase surveillance Sequential start of units possible HP/LP pressostat switches ensuring long compressor lifetime Fresh air intake Four way fork lift handling Tents ccommodation Military camps Relief camps Work camps in oil and gas industry TO COOL Specifications Units C-M11 Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 1m Refrigerant Nominal cooling capacity Heating capacity (optional) Power supply Max. running current, cooling/heating Locked rotor amperage (LR) Max. power consumption cooling/heating Hose connection Product size (h x l x w) Weight C C m 3 /h db() kw kw V/Hz W Ø mm mm kg 20-60 -32 - +20 1700 55 R134a 11 8 400/3ph/50 15/16 65.5 4200/8800 1 x 315 735 x 1140 x 1140 170 33
MOBILE COOLING TENT COOLING C-M16 Insulated duct Ø315mm Uninsulated ducts Ø315mm (flexible duct and air distribution duct) Storage bags for uninsulated ducts Cover for the unit Ground rod Wheels and wheel bracket (which can also hold the room thermostat during transportation) The C-M16 is capable of maintaining the shelter temperature at +20-25 C when the shelter is built accordingly Designed for optimal utilization of a standard 20" ISO container (16 pcs) The C-M16 is built into a strong metal frame with insulated panels where relevant, powder coated Top finish painting is standard sand colour Scroll compressor for a high degree of reliability and low noise level utomatic phase surveillance Sequential start of units possible HP/LP pressostat switches ensuring long compressor lifetime Fresh air intake Four way fork lift handling Easy strap down on air cargo pallets and stackable (two units on top of each other) Tents Military camps Relief camps Work camps in oil and gas industry Specifications Units C-M16 Operating temperature range, cooling ir flow Sound level @ 3m Refrigerant Nominal cooling capacity Power supply Max. running current, cooling Locked rotor amperage (LR) Max. power consumption cooling/heating Flex. air duct connection Product size (h x l x w) Weight C m 3 /h db() kw V/Hz W Ø mm mm kg 20-55 2200 59 R134a 15 400/3ph/50 13 73 7700/8800 1 x 315 1112 x 1370 x 1080 220 34
MOBILE COOLING TENT COOLING C-M18 Remote thermostat with 15m cable and cooling/heating selector switch Insulated, flexible air duct Ø400mm x 3m incl. storage bag Uninsulated flexible air duct Ø400mm x 5m incl. storage bag ir distribution duct Ø400mm x 6m Trolley with wheels F7 filter Designed for optimal utilization of a standard 20" ISO container (24 pcs) The C-M18 is built into a strong metal frame with insulated panels where relevant, powder coated Top finish painting is standard sand colour Option with built in heating will heat when ambient temperature is below 20 C Scroll compressor for a high degree of reliability and low noise level utomatic phase surveillance Sequential start of units possible HP/LP pressostat switches ensuring long compressor lifetime Fresh air intake Four way fork lift handling Easy strap down on air cargo pallets and stackable (two units on top of each other) Tents ccommodation Military camps Relief camps TO COOL Specifications Units C-M18 C-M18 (60 Hz) Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 3m Refrigerant Nominal cooling capacity Heating capacity (optional) Power supply Max. running current, cooling/heating Locked rotor amperage (LR) Max. power consumption cooling/heating Hose connection Product size (h x l x w) Weight C C m 3 /h db() kw kw V/Hz W Ø mm mm kg 20-60 -32 - +20 2500 59 R134a 17.5 6/16 400/3ph/50 16/26 73 8300/variable 1 x 400 780 x 1450 x 1140 240 20-60 -32 - +20 2500 59 R134a 17.5 6/16 208/3ph/60 33/52 164 8300/variable 1 x 400 780 x 1450 x 1140 243 35
MOBILE COOLING TENT COOLING C-M18 CBRN The C-M18 is built into a strong metal frame with insulated panels where relevant, powder coated Top finish painting is standard sand colour Scroll compressor for a high degree of reliability and low noise level utomatic phase surveillance Sequential start of units possible HP/LP pressostat switches ensuring long compressor lifetime Fresh air intake Four way fork lift handling Easy strap down on air cargo pallets and stackable (two units on top of each other) Remote thermostat with 15m cable and cooling/heating selector switch Insulated, flexible air duct Ø400mm x 3m incl. storage bag Uninsulated, flexible air duct Ø400mm x 5m incl. storage bag ir distribution air duct Ø400mm x 6m F7 filter Trolley with wheels HEP filtration unit Tents ccommodation Military camps Relief camps Specifications Units C-M18 CBRN Operating temperature range, cooling Operating temperature range, heating ir flow Sound level @ 1m Refrigerant Max. cooling capacity Heating capacity (optional) Power supply Max. running current, cooling/heating Locked rotor amperage (LR) Power consumption cooling/heating Hose connection Product size (h x l x w) Weight (without accessories evap/cond) C C m 3 /h db() kw kw V/Hz W Ø mm mm kg 20-60 -32 - +20 2500 54 R134a 17.5 16/20 400/3ph/50 16/depending on heating capacity 73 8300 1 x 400 780 x 725 x 1140 137/104 36
WHY CHOOSE OUR MOBILE PRODUCTS CHOOSING THE BEST SOLUTION Our mobile products can be used in many different applications such as industry, construction, homes and offices. USE THE SME UNIT IN DIFFERENT PLCES Our heaters, dehumidifiers and air coolers are all portable. REDUCE OPERTING COSTS We focus on developing energy saving units. CRETING HELTHY ENVIRONMENTS Our dehumidifiers prevent mould and bacteria development and keep stored goods dry. SVE TIME ND MONEY Our dehumidifiers speed up many renovation and construction works and our heaters warm up quickly. WORK IN HELTHY CONDITIONS Our portable coolers and air-conditioners keep temperature and humidity at a comfortable level. PROTECTING THE ENVIRONMENT Our development teams focus on reducing the carbon foot print by making our products as environmentally friendly as possible. USER ND MINTENNCE FRIENDLY Our products are easy to install, use and maintain. 37
PRODUCT CTLOGUE NOTES 38
danthermgroup.com Dantherm Group Dantherm Group /S Marienlystvej 65 DK-7800 Skive Denmark t. +45 99 14 90 00 Dantherm /S Marienlystvej 65 DK-7800 Skive Denmark t. +45 96 14 37 00 Dantherm Ltd. Unit 12, Galliford Road Maldon CM9 4XD United Kingdom t. +44 (0)1621 856611 Dantherm S.p.. Via Gardesana 11 37010 Pastrengo (VR) Italy t. +39 045 6770533 Dantherm Sp. z o.o. ul. Magazynowa 5a 62-023 Gądki Poland t. +48 61 65 44 000 Dantherm S Løkkeåsveien 26 3138 Skallestad Norway t. +47 33 35 16 00 Dantherm B Fridhemsvägen 3 602 13 Norrköping Sweden t. +46 (0)11 19 30 40 Dantherm G Im Vorderasp 4 8154 Oberglatt ZH Switzerland t. +41 44 851 51 51 Dantherm GmbH Oststraße 148 22844 Norderstedt Germany t. +49 40 526 8790 Dantherm SP S.. C/Calabozos 6 (Polígono Industrial) 28108 lcobendas, Madrid Spain t. +34 91 661 45 00 Dantherm LLC Transportnaya 22/2 142800, Stupino Moscow Russia t. +7 (495) 642 444 8 Dantherm SS 23 rue Eugène Henaff 69694 Vénissieux Cedex France t. +33 4 78 47 11 11 MCS China Unit 2B, No. 512 Yunchuan Road Baoshang, Shanghai, 201906 China t. +8621 61486668 Dantherm Dubai Suite #1009 Prism Tower, Business Bay Dubai United rab Emirates t. +971 56 831 7466