Technical Installation, Start-up, Operation & Maintenance Manual For ENERGENICS KARTWASH PREMIER WITH TOUCHPAD DISPLAY

Similar documents
Technical Installation, Start-up, Operation & Maintenance Manual For ENERGENICS KARTWASH PREMIER WITH TOUCHPAD DISPLAY

Installation & Operation Manual For ENERGENICS In-Line Space Saver Lint Filters

Installation, Operation and Maintenance Manual

GIRTON TREE, TUB, AND CART WASHER MODEL 80-O

Installation, Operation, and Maintenance Manual RTE14S & RTE14S-2. For the Taco Bell "Rethermalizer" Model Numbers

JFT Flight Machine. JFT Flight Machine. Models. Options. Standard Features. JFT Flight Machine

CL64T INDUSTRIAL TOTE WASHER

AccuBrine automated brine maker Technical Specifications

MARVAIR SCHOLAR III HEAT PUMPS & AIR CONDITIONERS MODELS VAIA & VAISA EXPLODED VIEW PARTS ID

WD7664 / WD7663 Maxon Burner Ellis Whisper Dryer Installation & Start UP

Models. Options. Standard Features. LoH 2 O

OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS WASHER-EXTRACTOR WARNING

Casey Craft

GIRTON CABINET WASHER MODEL 794A

CL44eR DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE. Item # Quantity C.S.I.

WD7664 / WD7663 Maxon Burner. Ellis Whisper Dryer Installation & Start UP

Engineers manual. Under counter machines

C44A/C44AW DISHWASHER

Always keep this manual in a safe readily accessible location. MODEL SERIAL SERVICE COMPANY TELEPHONE NUMBER

EN l CartWash Plus. CartWash Plus. Hygienically perfect cleaning of laundry carts

The DWC-Series - Drum Washer / Crusher Unit

CL64e DISHWASHER DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE

Engineers manual. Pass Through machines P500 P500 A P500 AS P500 A WS P500 AS WS. A- AirBreak WS Water Softener. AS Dual Rinse Element

Powerful and efficient trolley cleaning and sanitizing. WS 125 trolley washer. Group

BOHEC R CRS86A DISHWASHER STANDARD FEATURES MODEL ACCESSORIES DIRECTION OF OPERATION VOLTAGE OPTIONS AT EXTRA COST

hinged tops or hinged doors.

AIR SHOWERS CAP701 SERIES

AIR ONE PROFILER TOP and SIDE DRYER INSTALLATION MANUAL Part # DRYRPROFLRXXXXXX (ALL COLORS)

OPERATION MANUAL KP4041 POLY SCRAP COMPACTOR

BASIL 6700 TUNNEL CAGE WASHER

AHPO-6/18 GOLD PROOFER OVEN

CLPS66e DISHWASHER DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE

SECTION LABORATORY GLASSWARE WASHER Model 1800 LXA PART 1 GENERAL 1.01 SYSTEM DESCRIPTION 1.02 SUBMITTALS 1.03 QUALITY ASSURANCE 1.

Operational Overview and Controls Guide

Brivis Touch Controller. Installer Manual

Powerohm Resistors Digital HRG System

AQ-4000 Series Information & Setup

US Filtermaxx. 200,000 BTU Waste Oil Burner

PERFORM Operating Document. Use and Maintenance of Undercounter High Temperature Dishwasher

UNDERCOUNTER DISHWASHER

GETINGE GEW 2100LS CAGE AND RACK WASHER PREVENTING CONTAMINATION IN ANIMAL CARE

Owner s Manual. Keep with machine for reference PKD24A INSTALLATION & OPERATION. Rev

MODEL GL-X INSTALLATION & OPERATION

Conveyor Washer Operation Manual

Operation Manual NEMA 4X Controls

FOR MORE INFORMATION AND PRODUCTS, VISIT: USER MANUAL TO REMAIN IN VEHICLE

Version 7 1/ LXP

Version 7 1/ LX

PRO 2000i LOW LEVEL DEPOSITOR

Operation, Cleaning and Maintenance Manual

TECHNICAL MANUAL TRAY DRYER

BASIL 6000 TUNNEL CAGE WASHER

Q: What can be done if my dishes have a cloudy, white film on them after a wash?

ENVIRO-PAK. Operation and Maintenance Manual. Manufacturer of

PRESSURE WASHING SYSTEM

RELIANCE 400 LABORATORY GLASSWARE WASHER

SERVICE MANUAL FOR 6537 & 6538 SERIES TWO TON HIGH EFFICIENCY PACKAGED HEAT PUMPS

Installation Manual. Manual P/N rev. B. PRO Series Standard Rack Conveyor Dishwashers LISTED. Models.

OPERATING & SERVICE PARTS MANUAL HDS-215 COMBINATION SHRINK SYSTEM

The Danger signal indicates an immediately hazardous situation which, if not avoided, will result in death or serious injury.

Nu/Clean 624 XL Touch Screen Inline Aqueous Cleaner Technical Specifications & Pricing

FLAVIA CREATION C500 User Guide

MODEL L-1X & L-1X16 Installation & Operations

CPF PRODUCT DESCRIPTION

EG Controls. SLIMVIEW 120 VOLT FLOAT SERIES DUPLEX PUMP CONTROL PANEL SPECIFICATION for CITY OF E G

Technical Training Prodigy Undercounter Cubers. Models CU1526, CU2026 and CU3030

TC-150 CONVEYORIZED OVEN. OPERATION AND MAINTAINANCE MANUAL Ovens with Omron PLC and Touchscreen

Installation/Operation Manual with Service Replacement Parts. E 2 series High Temperature Upright Conveyor Dishwasher. Models:

Standard Features. Performance/Capacities

IJ3000 IJ3000 Flushing System N Revision B Installation Instructions Page 1 of 10

MARTIN Insertable Dust Collector

C&M REAR FEED Long-stroke Vertical Down-stroke Baler for Baling Multi-Materials

1 and 2 Fan Vision Series Portable Dryers

ZD Tunnel Inline Cleaning Systems suginocorp.com Zippel GmbH

SCE275: CM 3 Under-the-counter. Technical Training

Engineers manual. Pass Through machines P500 P500 A P500 AS P500 A WS P500 AS WS. A- AirBreak WS Water Softener. AS Dual Rinse Element

SAFETY AND INSTALLATION MANUAL MODEL 8100

Vertical Downstroke Baler. Designed For: * Warehouses * Retail Chains * Distribution Centers * Manufacturing Plants *

Installation & Maintenance Data IM Contents

REVERSE OSMOSIS SYSTEMS

SECTION AIR COMPRESSORS AND ACCESSORIES

AirBath Hydro-Massage Tubs UL1795 Installation and Operating Instructions

Warehouse Operations Safety Inspection Checklist

MODEL GWX-200 INSTALLATION & OPERATION

#7: KMI Pulp Moulding System # KMI

Control Panel For Water Wash Hoods AM2

CROWN. Boiler Co. Santa-Fe Series. Hydronic Air Handlers INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS

CL64eN-BAS DISHWASHER

Owner s Manual. MODELS AH/B/C/Scullery/Pizza/Bowl INSTALLATION & OPERATION Rev 1.01A

CL44eN-BAS DISHWASHER

INSTALLATION and OPERATION MANUAL DIRECT STEAM KETTLES MOUNTED ON ELECTRIC BOILER BASE CABINET MODELS: EMT-6 EMT-10 EMT-12 EMT-6-6 EMT-10-6 EMT-10-10

QuadraTouch Pro Software Manual Dryer Control System

CLPS86eN-BAS DISHWASHER

KINGS COUNTY JAIL EXPANSION PHASE III COUNTY OF KINGS SECTION

Basic System Includes:

FT900SDBD DUAL RINSE FLIGHT-TYPE DISHWASHER

FT900 FLIGHT-TYPE DISHWASHER

Millard Refrigerated Services Monthly Health and Safety Observations

FT1000 ENERGY RECOVERY WITH BLOWER DRYER FLIGHT-TYPE DISHWASHER

MIST MAX MODEL MM2400. Important: Installation and Operation Manual

Transcription:

1470 Don Street Naples, Florida 34104 Telephone: (239) 643-1711 Fax: (239) 643-6081 Customer Service: (800) 944-1711 Technical Installation, Start-up, Operation & Maintenance Manual For ENERGENICS KARTWASH PREMIER WITH TOUCHPAD DISPLAY Descriptions Page Table of Contents 1 Layout Configuration, Dimensional Drawings & Utility Connections: User Defined Layout Configuration & Voltage Requirements 2 Roof Exterior Dimensions 3 Wash Chamber Exterior Dimensions 4 Mechanical Chamber Exterior Dimensions 5 Soiled Entrance Exterior Dimensions 6 Clean Exit Exterior Dimensions 7 Utility Requirements & Connections 8 4 Kartwasher Pit & Sump Detail 9 Unloading & Installation Instructions 10 Connecting Utilities (Refer to Page 9 Kartwasher Utility Connections) 11 Prior to Start Up / Default Cycle Times 12 Kartwasher Cycle Start & Sequence of Operation: Load Sequence 13 Start Sequence 14 Wash Sequence (Programmable) 15 Rinse Sequence (Programmable) 16 Drain Sequence (Programmable) 17 Drying Sequence (Programmable) 18 Eject Sequence (Programmable) 19 Diagnostic Input/Output Status Screen 20 Input Section Output Section Cycle Status Indicators 21 Programming Procedure for Sequences Accessing Program Screen 22 24 Manual Door Operation 25 Maintenance 26 Components 27 1

2

3

4

5

6

7

8

9

KARTWASHER UNLOADING & INSTALLATION INSTRUCTIONS Your Kartwasher is shipped fully assembled ready to place on the floor or pit in your selected location. Follow the directions: Unloading:*DO NOT SIGN BILL OF LADING UNTIL INSPECTED* 1. Unwrap Kartwasher and inspect for damage during shipping. 2. The Kartwasher may be picked up with a forklift with extra long (60 min.) forks. It must be picked up off center WITH THE BLOWER TOWARD THE FORKLIFT. The weight of the components in the side of the Kartwasher make it off balance at the center lift. The balance point is near the door edge in the middle of the Kartwasher pallet. If there is no forklift with extra long forks to pick up the Kartwasher it can be lifted by any means at one end and dragged off the truck and slid into position. 3. Lift the Kartwasher and unbolt the wood holding the Kartwasher to the pallet. Remove the pallet and any plywood under the Kartwasher. 4. Slowly lower the Kartwasher onto the floor. Do not drop. Slide into the final position using wood between the Kartwasher frame and forks. 5. Mount to the floor in 4-8 places using proper fasteners per floor type. Pit Installation 1. Remove the shipping blocks. Place 4" blocks in one end of the pit. 2. Slide the Kartwasher onto the blocks. Using a J bar, forklift or similar leverage instrument, lower the Kartwasher into the pit. Remove the blocks from the one end and lower that portion into the pit. Due to the pit dimensions and depth the Kartwasher must be lowered in stages into the pit. For conveyor systems see additional instructions. 10

Connecting The Utilities The electrical conduit, water pipe and air line should be connected through the ceiling to the component in the utility section of the Kartwasher. Drill holes directly above the internal connection locations. Caulk around the ceiling holes inside and out after connecting. 1) Connect the power to the internal panel complying with local electrical codes. 2) Connect the water to the ¾ NPT water connection on the water tank. 3) Connect the compressed air to the ¼ air connection. 4) The exhaust outlet (20 X20 ) in the roof of the wash chamber should be ducted to the outside of the laundry. 5) The inlet (24 X 24 ) on the utility cabinet roof may be connected to fresh air or to the clean side of the laundry. For Kartwashers with built-in sumps in the bottom of the wash chamber connect the 1½ drain (placement specified when ordered) to the main drain of the laundry per applicable codes. 11

PRIOR TO START UP 1. Attach cable to 64,000 color touchpad display and mount to front of Kartwasher soiled side. 2. Attach cable to Emergency Stop button and mount to front of Kartwasher clean side. 3. Attached clearly marked wires to Beacon/Strobe (Optional) and mount to location at user s discretion. 4. Open water supply valve (by others) to fill water tank. Make sure the float valve in the water tank shuts off water feed prior to water level reaching overflow tube. 5. Open air supply valve (by others) and set air regulator inside the mechanical chamber to 25 psi. 6. Fill 2 chemical tanks (Detergent/Sanitizer & Rinse Agent) with proper chemicals. Your chemical supplier should give recommendations of their product. If chemicals are not available at the time of start-up, use water.) 7. Mount entrance and exit ramps on models with built in sump option. 8. Turn on main power disconnect (others). 9. Open main control panel and turn overload switches to the on position. 10. Briefly press the large motor starter contactor to check direction of the blower motor. If wrong shut off the power at the main power disconnect and reverse two wires at their connection points.. This will change the direction of the blower motor and the pump motor. Both the blower and pump motors are setup for the proper direction in the factory. The Kartwasher should be ready for full operation. Wash outside of cart 5 seconds Wash inside of cart 10 seconds Rinse outside of cart 5 seconds Rinse inside of cart 10 seconds Drain cart 5 seconds Blow dry cart 90 seconds Cart exit 5 seconds DEFAULT CYCLE SETTINGS 12

KARTWASH CYCLE START & SEQUENCE OF OPERATION LOAD SEQUENCE The Kartwasher is prepared to operate. Note bottom center of display instructing operator to completely load the cart with the front wheel resting against the eject pin located on the floor. 13

START SEQUENCE A cart has been loaded into the Kartwasher. Sensor has identified cart loaded in the machine ready to operate. Press Press Start button to start the cycle. Note: If the start button is flashing, with a cart in the unit, the PLC is missing an input necessary for the beginning of the cycle. See Diagnostics Section (Pages 20 & 21). 14

WASH SEQUENCE The wash sequence has started. The wash sequence will process the inside and the outside of the cart. The elapsed time remaining for each is shown in seconds. The total time remaining for the complete cycle is shown in the time left box. If the cycle needs to be paused press the STOP button. To resume the cycle press the START button. 15

RINSE SEQUENCE The rinse sequence has started. The rinse sequence will process the inside and the outside of the cart. The elapsed time remaining for each is shown in seconds. The total time remaining for the complete cycle is shown in the time left box. If the cycle needs to be paused press the STOP button. To resume the cycle press the START button. 16

DRAIN SEQUENCE The drain sequence has started. The drain sequence will tilt the cart to allow water inside the cart to drain through holes built in the cart bottom. If there are no holes then ½ holes will need to be drilled in each corner. The elapsed time remaining is shown in seconds. The total time remaining for the complete cycle is shown in the time left box. If the cycle needs to be paused press the STOP button. To resume the cycle press the START button. 17

DRYING SEQUENCE The dry sequence has started. During the dry sequence the cart will remain tilted to allow water inside the cart to drain through holes built in the cart bottom. The elapsed time remaining is shown in seconds. The total time remaining for the complete cycle is shown in the time left box. If the cycle needs to be paused press the STOP button. To resume the cycle press the START button. 18

EJECT SEQUENCE The eject sequence has started. The clean door opens simultaneously activating the beacon & siren to alert personnel that a cart is to be automatically ejected to the clean side of the laundry. The wheel stop pin releases the cart. After the cart is fully ejected the clean door closes and the soil door opens to start the next cycle. 19

DIAGNOSTIC INPUT/OUTPUT STATUS SCREEN INPUT SECTION 1. E-Stop - Illuminates when any or all E-Stop Switches are depressed 2. Wash Tank Level Illuminates when Detergent/Sanitizer tank level is low 3. Rinse Tank Level Illuminates when Rinse Agent tank level is low 4. Clean Door Open Illuminates when clean door is open 5. Clean Door Closed Illuminates when clean door is closed 6. Water Pump Contact Illuminates when pump contactor is engaged 7. Soil Door Open Illuminates when soiled door is open 8. Soil Door Closed Illuminates when soil door is closed 9. Cart In Sensor Not applicable 10. Cart Exit sensor Illuminates when cart passes cart exit sensor in wash chamber 11. Water Tank Level Low Illuminates when water level is low in storage tank 12. Blower Contact Illuminates when blower contactor is engaged 20

PLC OUTPUT SECTION 1. Pump Rinse Illuminates when rinse chemical pump is engaged 2. Chamber Light Illuminates when wash chamber light is on 3. Water Pump Illuminates when water pump is on 4. Blower Illuminates when drying blower is on 5. Soil Door Illuminates when soil door is closed 6. Clean Door Illuminates when clean door is closed 7. Ejector Valve Illuminates when floor is raised/tilted 8. Stop Pin Illuminates when wheel stop pin is engaged 9. Inside Zone Solenoid Valve Illuminates when inside cart spray is operating 10. Outside Zone Solenoid Valve Illuminates when outside cart spray is operating 11. Pump Wash Illuminates when detergent chemical pump is operating 12. Beacon Light Illuminates when clean door open beacon and siren are operating CYCLE STATUS INDICATORS (INPUT PAGE 11) (OUTPUT PAGE 12) 1. Load Sequence: Input #5 & 7 Output #6 & 8 2. Start Sequence: Input #5, 7 Output #6 & 8 3. Wash Sequence: Input #5, 6, 8 Output #2, 3, 5, 6, 8, 9, 10 & 11 4. Rinse Sequence: Input #5, 6, 8 Output #1, 2, 3, 5, 6, 8, 9, & 10 5. Drain Sequence: Input #5, 8, Output #2, 5, 6, 7, & 8 6. Dry Sequence: Input #5, 8 & 12 Output #2, 4, 5, 6, 7, & 8 7. Eject Sequence: Input #4, 8 & 10 Output #2, 5, 6, 7 & 12 END 21

PROGRAMMING PROCEDURE FOR SEQUENCES *NOTE: PRESS MAIN MENU AT ANYTIME TO RETURN TO OPERATING SCREEN* PRESS SETTINGS ON SCREEN PASSWORD ENTRY SCREEN 22

ENTER 1470 TOUCH SEQUENCE BOX TO CHANGE 23

ENTER NEW SEQUENCE VALUE 24

MANUAL DOOR OPERATION TOUCH MANUAL DOOR CONTROL TOUCH TOP OF DESIRED DOOR OPENING ON SCREEN *NOTE: PRESS MAIN MENU AT ANYTIME TO RETURN TO OPERATING SCREEN* 25

MAINTENANCE The Energenics Kartwasher was designed for low maintenance and long life. In addition, except for the conveyor under the floor, all maintenance items are assessable at floor level. ROUTINE MONITORING: The detergent and sanitizer must be refilled as needed. Indicator lights on the front panel alert operators to low solution conditions. The electric eyes should be kept clean from dirt and debris. They should be wiped off with a clean cloth as needed. Periodically test the Emergency Stop buttons to insure operating safety. QUARTERLY: Door & ejector wheels: Spray with WD-40. Check the door air cylinders and auto ejector cylinder. Check the two Pulsatron chemical pumps, the Pulsatron metering pump tubes have a design life of one year. ANNUALLY: Water Tank Float: Check the water tank float and float seals. Inside the washing compartment, inspect the caulking around the base between the fiberglass and aluminum. Re-caulk if necessary to prevent water from entering between the aluminum flange and the fiberglass panel. Replace the metering pump tubes per the instructions attached. 3/8 outside diameter tubes is the correct size for the pump. 26

COMPONENTS: (All components readily available in-stock from manufacturer and distributors) Blower fan: American Fan 15hp blower Pump: Grainger model Teel 2hp Booster Pump 2PC31 Main Control Panel: IDEC Water Valves: Diffley Valves Air Cylinders: (Doors-Econoair) (All others) Speedair Spray nozzles: Spraying systems Pro Max Electric eyes: ATS self contained beam sensors. Chemical pumps: Pulsatron Electronic Metering Pumps 27