Be (g) Be + (g) + e - O (g) O + (g) + e -

Similar documents
Ionisation Energies. You can write equations for this process: Na (g) Na + (g) + e kjmol -1. O(g) O + (g) + e kjmol -1

Q1. The diagram below shows the values of the first ionisation energies of some of the elements in Period 3.

Write the full electron configuration of the Al 2+ ion.

State the element in Period 3 that has the highest melting point. Explain your answer. Element... Explanation

State the type of structure shown by a crystal of silicon. Explain why the melting point of silicon is very high

F321: Atoms, Bonds and Groups Electron Structure

ionisation energy atomic radii ionic radii electronegativity

We don t need to know the ideas behind this advanced model merely the idea itself. Put simply it is as follows

Q1. Ionisation energies provide evidence for the arrangement of electrons in atoms. (b) (i) State the meaning of the term first ionisation energy.

Atomic Weights of the Elements 2011

Particle Model Questions 1

Figure 1. Explain how rubbing an acetate rod with a cloth causes the rod and cloth to become charged

AP Air Ion Counter Instructions

Problem. Can paper mill sludge be used as a fertilizer for plants and does it change the ph of the

Use each of the terms in the box to explain how heat is lost from inside a house through the window. conduction convection radiation

Air Pavilion Quiz. Name: Class:

Use numbers given in the box to complete the following sentences. In the UK, the mains electricity supply is volts.

Chemistry in your cupboard: Finish

Different energy sources can be used to generate electricity.

The equation which links current, potential difference and resistance is:

SNC1P Electricity Practice Test

Electroscope. Making Atoms Visible. Easily create an electroscope to detect static electricity and radiation. American Nuclear Society

Soil Management Site Selection, Soil Fertility. Warren Roberts George Kuepper

Natural vs Human-harnessed Electricity

Technical Description. Ionisation Chambers

Soil Ecology Project. Alex Pace, Meredith Callis, Cate Wilson, Sarah Welch

Title: Standard Operating Procedure for Measurement of Total Hydrocarbon Using a Flame Ionization Detection

How Ground Source Heat Pumps Work

STATIC MERRY-GO-ROUND

Van de Graaff Generator. Spinner Package Demonstration Guide

2. Gas B. The column of hot gases, flames, and smoke rising above a fire; also called convection column, thermal updraft, or thermal column

(Refer Slide Time: 00:00:40 min)

Activity Sheet Chapter 1, Lesson 1 Molecules Matter

PLEASE READ AND FOLLOW THESE INSTRUCTIONS

Activity Sheet Chapter 2, Lesson 3 Changes of State Condensation

Wet ElectroStatic Precipitator

[1] Lecture 2 Particulate emission control by mechanical separation & wet gas scrubbing

Frequently Asked Questions

Unit 1: Fire Engineering Science (A/505/6005)

The diagram shows the inside of an incorrectly wired three-pin plug. What two changes need to be made so that the plug is wired correctly?

P1.1H Infrared Radiation Questions Higher

Chemistry Instrumental Analysis Lecture 29. Chem 4631

A student investigated how much energy from the Sun was incident on the Earth s surface at her location.

RFMA 2017 March 5 7, 2017

It pays to go green with solakool

Metal Turbine Exhaust Joints An analysis of metal and fabric GTX expansion joints

ANIMAL, PLANT & SOIL SCIENCE D3-2 SOIL CHEMISTRY

Q1. Carefully read the following extract from a safety leaflet. Then answer the questions.

(1) ... (2) Each strip has a negative charge. The cloth is left with a... charge. This is because particles called... have been transferred

Arrangements of cold exchangers or cold accumulators in cryogenic separation or liquefaction plants.

Radiation Control and Monitoring System on the HTTR

PLANT NEEDS 3rd. through 5 th Grade

Nutrient Management And Nutrient Cycling Raymond C. Ward, President Ward Laboratories, Inc Kearney, NE

Minco SmartHeat SLT Self-Limiting Thin-Film Heater Technology

FS 231: Final Exam (5-6-05) Part A (Closed Book): 60 points

Mechanical Engineering Department Sheet (1)

ADAS105: Electron impact ionisation cross-section - graphing and rate evaluation

SOIL SAMPLING AND ANALYSIS

Metal hydride storage system for MICE experiment at Rutherford Appleton Laboratory. Technical specification.

Science Class 6 Chapters 13, 14 and

Soils. Nutrients needed by plants 10/21/2013. Consists of a series of layers called. Soils consists of: Topsoil (A horizon) upper most layer

Changes of State. Lesson 1

Biodiversity ITEM POOL

IGCSE PHYSICS GRADE 11 TERM 1 ASSESSMENT BOOKLET

Fundamentals of Electrostatic Discharge

Chapter 9: The basics of air preparation

INCREASED EFFICIENCY IN VETIVER PROPAGATION WITH THE USE OF GROWTH PROMOTERS. Abstract. Introduction

The Dirt on Soil Science

Incorporating Aluminum Honeycomb to Increase Efficiency of U-tube Removable Heat Exchanger

Ionisation Chambers Containing Boron as Neutron Detectors in Mixed Radiation Fields

Grid or Zone sampling Unfertilized Soybean Fields in the Spring/Summer is Increasing (topsoil only)

The Cameron Clean Room

ECCO - NEW ELECTROSTATIC PRECIPITATOR PILOT PLANT AT PLABUTSCH TUNNEL IN GRAZ

Gaseous detectors. 1

Applications and Accessories, Cryo Pumps

Q1. The diagram shows an experiment to find out what happens to infrared waves when they strike different surfaces.

a. CFCs. b. HCFCs. c. Pressurized nitrogen. d. Compressed dry air. 17. The state of the refrigerant leaving the condenser of a refrigeration system

Efficient Steam System Design

Determination of the enthalpy of vaporization of liquids

Applications of Thermodynamics: Heat Pumps and Refrigerators

GUILFORD COUNTY SCHOOLS

White paper on the Dielectric Barrier Discharge Detectors. Introduction:

EkoAir Heat exchanger selection manual.

The Effects of Soil Acidity on Phosphorus Uptake. by Vegetable Crops in Hestern Oregon- W. A. Sheets,-

AC39 Manual Water Softener Operation and Recharging

Interactive Catalog Replaces Catalog Pages

Unit D: ph of Soil. Lesson : Identifying the ph Changes in Soil

Lab # 1 Exchange principles con- and counter-current systems

a. CFCs. b. HCFCs. c. Pressurized nitrogen. d. Compressed dry air. 17. The state of the refrigerant leaving the condenser of a refrigeration system

AKVALIFE Water Ionizer

Soils and Fertilizers. Leo Espinoza Soils Specialist

Robotics Teleclass Webinar!

energy from hot flame [3] [2]

FPD - Flame Photometric Detector

5 Operating Modes GX Smallest 6 gas sample draw PID library of over 600 VOC s 2 Interchangable smart sensor slots

5 Operating Modes GX Smallest 6 gas sample draw PID library of over 600 VOC s 2 Interchangable smart sensor slots

Static Control in the Plastic Bottling Industry

Static Electricity: Bending and Floating

At the end of this study topic, you will be able to discuss the chemistry of fire; discuss the fire dynamics in a compartment fire; and explain the

Atomic Data and Analysis Structure

Transcription:

2.13 Ionisation Energies Definition :First ionisation energy The first ionisation energy is the energy required when one mole of gaseous atoms forms one mole of gaseous ions with a single positive charge This is represented by the equation: H (g) H + (g) + e - ways gaseous The equation for 1st ionisation energy always follows the same pattern. It does not matter if the atom does not normally form a +1 ion or is not gaseous Be (g) Be + (g) + e - O (g) O + (g) + e - l values of ionisations are positive and therefore endothermic. This is because energy must be supplied to overcome the electrostatic attractive force between the nucleus and the electron. Definition :econd ionisation energy The second ionisation energy is the energy required when one mole of gaseous ions with a single positive charge forms one mole of gaseous ions with a double positive charge This is represented by the equation: Ti + (g) Ti 2+ (g) + e - Factors that affect Ionisation energy There are three main factors 1.The attraction of the nucleus (The more protons in the nucleus the greater the attraction) 2. The distance of the electrons from the nucleus (The bigger the atom the further the outer electrons are from the nucleus and the weaker the attraction to the nucleus) 3. hielding of the attraction of the nucleus (An electron in an outer shell is repelled by electrons in complete inner shells, weakening the attraction of the nucleus) Many questions can be answered by application of these factors uccessive ionisation energies An element can have as many successive ionisation energies as it has electrons The patterns in successive ionisation energies for an element give us important information about the electronic structure for that element. Why are successive ionisation energies always larger? The second ionisation energy of an element is always bigger than the first ionisation energy. When the first electron is removed a positive ion is formed. The ion increases the attraction on the remaining electrons and so the energy required to remove the next electron is larger. Each successive ionisation energy is bigger than the previous one for the same reason. ome of the increases are much bigger, however, and these big jumps gives us evidence for the main principle electron shells. Ionisation energy 1 2 3 4 5 6 No of electrons removed N Goalby chemrevise.org 1

How are ionisation energies linked to the main electron energy levels? Ionisation energy 1 2 3 4 5 6 No of electrons removed Notice the big jump between 4 and 5. There is a big jump between the 4 th and 5 th ionisation energies. Explanation The fifth electron is in a inner main shell closer to the nucleus and therefore attracted much more strongly by the nucleus than the fourth electron. It also does not have any shielding by inner complete shells of electron so is easier to remove. Example: What group must this element be in? 1 2 3 4 5 Ionisation 590 1150 4940 6480 8120 energy kj mol -1 Here there is a big jump between the 2nd and 3 rd ionisations energies which means that this element must be in group 2 of the periodic table as the 3rd electron is removed from an electron shell closer to the nucleus with less shielding and so has a larger ionisation energy The first Ionisation energy of the elements The pattern in the first ionisation energy of each successive element in the periodic table also gives us useful information about electronic structure 2500 He Ne The shape of the graph for periods two and three is similar. A repeating pattern across a period is called periodicity. 2000 Ionisation energy kj mol -1 1500 1000 500 H Li Be B C N O F K Ca 0 0 5 10 15 20 Atomic number Evidence for the main electron energy levels The noble gases are always at the maximum peak for each period, but there is a decrease in ionisation energy down the group. (true of all groups). This is because as one goes down the group the outer electrons become further from the nucleus and become more shielded from the nuclear pull by complete inner shells There is a large drop each time between the group 0 elements and the group1 elements. This is because the element in group 1 will have its outer electron in a new shell further from the nucleus and is more shielded. o the group 1 element is easier to remove and has a lower ionisation energy. N Goalby chemrevise.org 2

He First Ionisation Energy 2500 2000 1500 1000 500 0 H Li K Xe Rb 1 2 3 4 5 6 7 8 Ne eriod 1 Kr eriod 2 period 3 period 4 eriod 5 Group Number Notice the drop in ionisation energy down each group As one goes down a group, the outer electrons are found in shells further from the nucleus and are more shielded so the attraction of the nucleus becomes smaller. Helium has the biggest first ionisation energy because its first electron is in the first shell closest to the nucleus and has no shielding effects from inner shells. Helium has a bigger first ionisation energy than hydrogen as it has one more proton. Evidence for the electron sub energy levels There is in general an increase in ionisation energy across a period. This is because as one goes across a period, the number of protons increases making the effective attraction of the nucleus greater. The electrons are being added to the same shell which has the same shielding effect and the electrons are pulled in closer to the nucleus. There are two small drops in the general trend, however, that provide further evidence for the existence of sub energy levels. Notice the small drop between the group 2 elements and group 3 elements (Be + B, + ). uminium is starting to fill a sub shell, whereas magnesium has its outer electrons in the sub shell. The electrons in the subshell are slightly easier to remove because the electron sub shell is slightly higher in energy and they are also slightly shielded by the electrons. Magnesium 1s 2 2s 2 2p 6 2 uminium 1s 2 2s 2 2p 6 2 1 N Goalby chemrevise.org 3

Why is there a small drop from to? With sulfur there are 4 electrons in the sub shell and the 4th is starting to doubly fill the first orbital. When the second electron is added to a orbital there is a slight repulsion between the two negatively charged electrons which makes the second electron easier to remove. phosphorus 1s 2 2s 2 2p 6 2 3 sulfur 1s 2 2s 2 2p 6 2 4 Two electrons of opposite spin in the same orbital atterns in the second ionisation energy. If the graph of second ionisation or each successive element is plotted then a similar pattern to the first ionisation energy is observed but all the elements will have shifted one to the left. 2nd Ionisation energy (kj/mol) 5000 4500 4000 3500 3000 2500 2000 1500 1000 10 12 14 16 18 20 Atomic Number The group 1 elements are now at the peaks of the graph Lithium would now have the second largest ionisation of all elements as its second electron would be removed from the first 1s shell closest to the nucleus and has no shielding effects from inner shells. Li has a bigger second ionisation energy than He as it has more protons. N Goalby chemrevise.org 4

Questions on Ionisation Energies 1) What is meant by the term first ionisation energy? 2) Write an equation to illustrate the process which occurs during the first ionisation of neon. 3) Explain why the value of the first ionisation energy of magnesium is higher than that of sodium. 4) Explain why the value of the first ionisation energy of neon is higher than that of sodium. 5) Write an equation to illustrate the process occurring when the second ionisation energy of magnesium is measured. 6) Explain why the third ionisation energy of magnesium is very much larger than the second ionisation energy of magnesium. 7) The Ne atom and the 2+ ion have the same number of electrons. Give two reasons why the first ionisation energy of neon is lower than the third ionisation energy of magnesium. 8) ketch a graph to show the first 5 ionisation energies of aluminium, 9) tate and explain the trend in the first ionisation energy of the elements to Ba in Group II. 10) Explain why the second ionisation energy of sodium is greater than the second ionisation energy of magnesium. 11) Explain why the second ionisation energy of magnesium is greater than the first ionisation energy of magnesium. 12) Use your understanding of electron arrangement to complete the table by suggesting a value for the third ionisation energy of magnesium. Ionisation energies of magnesium 1 2 3 4 5 kj mol -1 736 1450 10500 13629 13) tate which of the first, second or third ionisations of aluminium would produce an ion with the electron configuration 1s 2 2s 2 2p 6 1 14) Explain why the ionisation energy of every element is endothermic 15) Explain why the second ionisation energy of carbon is higher than the first ionisation energy of carbon. 16) Explain which element has the largest first ionisation energy 17) Identify the element in eriod 2 that has the highest first ionisation energy and give its electron configuration. 18) Identify the element in eriod 1 or 2 that has the highest second ionisation energy 19 ) Why is the first ionisation energy of krypton is lower than the first ionisation energy of argon. 20) Explain why the first ionisation energy of rubidium is lower than the first ionisation energy of sodium. 21) Give one reason why the second ionisation energy of silicon is lower than the second ionisation energy of aluminium. 22) redict the element in eriod 3 that has the highest second ionisation energy. Give a reason for your answer. 23) tate and explain the general trend in the values of the first ionisation energies of the elements to. 24) tate how, and explain why, the values of the first ionisation energies of the elements and deviate from the general trend. 25) Explain why the first ionisation energy of boron is lower than that of beryllium 26) There is a similar general trend in first ionisation energies for the eriod 4 elements gallium to krypton to that in period 3. tate how selenium deviates from this general trend and explain your answer 27) The table below gives the successive ionisation energies of an element. Deduce the group in the eriodic Table that contains this element Ionisation energies 1 2 3 4 5 kj mol -1 590 1150 4940 6480 8120 N Goalby chemrevise.org 5

28 The sketch graph below shows the trend in first ionization energies for some elements in eriods two and three. Frist Ionisation energy kj mol -1 A B C D E F G H I Atomic number a) elect, from the elements A to I, the one that has atoms with five p electrons b) elect, from the elements A to I, which one is a member of group 3 c) elect, from the elements A to I, which one form a +2 ion d) elect, from the elements A to I, which one is likely to be very unreactive. e) elect, from the elements A to I, which one(s) normally forms four covalent bonds per atom f) me Element D g) What would the be the formula of the compound formed between element F and C 29) What is wrong/ incomplete with the answers to the following question Which element has the largest 1 st Ionisation energy? a) Helium s outer electron is close to the nucleus with little shielding so hard to remove b) Helium is a noble gas and has a full shell of electrons. It would lose stability if an electron was removed. c) Helium has a really strong ionic bond between its electron and nucleus because it has no shielding. N Goalby chemrevise.org 6