MODEL : P619.1SS
DEAR CUSTOMERS, First of all, thank you for buying our product. Please read all the instructions and warnings in this manual carefully. The manual includes important information about safe installation, use, and maintenance of your product, as well as necessary warnings for optimum use of your appliance. Please keep this manual safe and within your reach for future reference. The manufacturer can not be held responsible for any damage that may occur due to translated or printed versions of this manual, or for any bodily, environmental or other material harm that may arise from incorrect use of the appliance. TABLE OF CONTENTS Important information regarding safety... : 1 Oven Technical Specifications... :2 Device Installation... :3-4 Oven Energy Efficiency... :5 Oven Description... :6 Oven Use,... :7-8-9 Manual Cooking Screen,... :9 Automatic Cooking Screen,... :10 Menu Screen Setup... :11 Cooling Fan,...:...12 Device Cleaning and Maintenance,... :13-14 Information about Transportation... :15 What to do before calling the authorized service... :15 Customer Service and Warranty... :16 After Sales Services... :16
CHILD SAFETY * NEVER allow small children to tamper with the oven, its controls or play near the oven. *When the oven operates, it has handling parts and its front glass panel is extremely hot. Therefore, children must be ABSOLUTELY kept away from the environment where oven operates. *For safety reasons, packaging material such as nylon and styrofoam must be kept away from children's reach, otherwise they can be dangerous. PRE INSTALLATION AND INSTALLATION WARNINGS *Before using your product, make sure that you remove all of the packaging materials. *This product shouldn't be used for any purpose other than cooking meal. Its use for any other purposes (For instance; to heat the room in which it is installed) is dangerous and unsuitable. Our company shall not be held responsible for and harm done to humans, animals or goods resulting from misuse of unfavorable use. *A smell resulting from insulation materials and heating elements can be experienced for once during the first use of the oven. If this happens, wait for the smell to dissipate before placing food inside the oven. Clean the interior of the oven with a humid cloth. *Do not touch the hearing elements inside to oven as the oven will be extremely hot during use. Oven surface may be extremely hot during grill function, be careful. *Never cook or fry on the base of the oven. *Do not cover the bottom of the oven with aluminum foil. *There are certain rules to obey when using electrical equipment. *While you are handling, cleaning or applying maintenance to product, unplug it from the mains. *Never pull the power cord from the outlet to disconnect it from the mains. *Do not touch the product if your hands or feet are wet or humid. *Do not allow children or non-adults to use the product without any guardian nearby. *If neglected, unhinged oven lid may hurt your hands. *Close and take the plug out and do not tamper with the oven if it breaks or doesn't work properly. *Any repairs and maintenance must be carried out by authorized services and only original spare parts must be used. Your oven may be damaged if you do not heed any of the warnings above. *Make sure all the functions are in "OFF" position when you're not using the oven. *Always use kitchen gloves when taking the tray out. *For the oven's cleanness and your safety, always keep the oven clean. The residual oil inside the oven may damage the surface in time. *Our company cannot be held responsible for the damages to people, animals or properties due to the nonconformance to the rules. *Our company cannot be held responsible for the damages that may result from dangerous or improper use of the oven. 1
OVEN TECHNICAL SPECIFICATIONS The oven has been designed to work with monophase 220-240V AC 50-60 electricity. Please read the registry label at the bottom-front section of the oven carefully prior to the installation. BAUMATIC MODEL NAME P619.1SS Top Heater 800 W Bottom Heater 1200 W Grill Heater 1200 W Cooling Fan 22 W Oven Lamp 25 W Turbo Fan 25 W Bottom Heater + Top Heater 2000 W Bottom Heater + Top Heater + Fan 2025 W Oven External Dimensions (WxDxH) 595x560x598 mm Installation Cabin Dimensions (WxDxH) 560x575x560 mm Oven Interior Volume 67 Lt Net Weight (Kg) 32 Gross Weight (Kg) 35 Voltage 220-240V AC 50-60 Maximum Power 2100 W ENVIRONMENTAL WARNING: *After you installed your product, please dispose of its packaging materials according to the safety and environment conditions. Please dispose the residual packaging materials to the relevant recycling containers according to their category (folio, cardboard, styrofoam). When you dispose any electrical appliance, make it unusable by cutting its power cord. The oven has been designed to work with monophase 220-240V AC 50-60 electricity. Please read the registry label at the bottom-front section of the oven carefully prior to the installation. 2
DEVICE INSTALLATION Installation must be carried out by an authorized technician according to the guidelines. Our company cannot be held responsible for the damages to people, animals or properties due to improper installation. INSTALLATION WARNINGS Dimensions and materials of the cabin or cupboard in which the built-in oven will be installed in have to be correct and it has to be resistant to temperature increases. Please install as shown in Figure. *The furniture walls in which the oven is installed in must be heat resistant. Wall panels must be resistant to 100 C especially if the side walls are made of wallboard. Plastic or adhesive panels that are not resistant to this heat may deform and sustain damage. *For safety reasons, direct contact with electrical parts of the oven must be avoided. *Isolation and protective parts must be installed in a way to prevent them from being removable by any tool. *Oven must be installed as in Figure in order to provide a more effective air flow. *It is advised to leave a space of at least 40 mm on the back for the kitchen unit in which the oven is installed. *A support must be placed under the oven which can carry the weight when placing the oven. *The back section of the cabin in the kitchen unit must be removed in order to provide better air flow. *First complete the place in which oven will be installed and the electrical installation in order to ready the oven. Afterwards, call the closest BAUMATIC Authorized Service. *It is not advised to install the device near refrigerators or freezers, otherwise performance of said devices would be affected from the heat radiated. Figure 1 3
INSTALLATION OF THE OVEN TO THE CABIN *Place the device centered on the inlaid cabin. *Open the oven lid and mount the body to the countertop with four woodscrews by aligning the holes on the sides. *Oven can be mounted to a cupboard up top or under the counter if desired. *When mounting an electrical built-in stove on the counter over the oven, electricity cables of the oven and the stove must be separated in order to dismount the oven from the stove when necessary. ELECTRICAL CONNECTION *The device must be connected to the main electricity grid only by authorized electricity technicians in accordance with the laws and regulations in force. *Make sure that the power from the main grid is enough to supply the power stated in the information tag placed on the front bottom of the device. *If the current of fuse in your house is less than 16 Ampere, have a qualified electrician connect a 16 Ampere fuse. WARNING: The device must absolutely be grounded. *Your oven includes a grounded plug mounted on the grid cord. This plug must be used with a grounded line. Have a licensed electrician do the grounding installation. Before supplying electricity to the device: 1) Place the oven in a way to make reaching the plug used for electricity connection or double pole switch easier. 2) Do not let the electricity cable touch hot surfaces when placed and do not pin it to the oven lid. 3) Contact the nearest authorized service if the electricity cable is damaged. Make sure authorized service makes the chance with a new cable with plastic insulation at the same size and that can withstand the electricity current the oven needs. *A double pole switch with at least 3 mm between the contact points between the device and the electric wire and suitable for carrying the desired load in accordance with the laws in force must be installed if the device is to be connected directly to the electric wiring. Ground wire must not be cut be double pole switch. *It is not advised to use adapters, multi plugs or extension cords. If absolutely necessary, adapters or extension cords in line with safety laws can be used. However, never go beyond the maximum current capacity and maximum power stated for the adapter. *Test heating elements for 3 minutes after the connections are done. *Electricity safety of the device is guaranteed only if connected to suitable source correctly with grounding in accordance with the rules. Our company cannot be held responsible for the damages to people, animals or properties due to the failure to ground the device properly. Figure 2: Oven Electricity Plug Connection 4
WHEN THE DEVICE IS INSTALLED INITIALLY: 1. Set the Temperature Control to maximum level. (250 C MAX) 2. Set the Function button as Top and Bottom Grill (and + Fan if available). 3. Run the oven in this setup for 30 minutes. 4. Open a window for air circulation. A smoke and smell resulting from insulation materials and heating elements can be experienced for once during this period. If this happens, wait for the smoke and smell to dissipate before placing food inside the oven. *After these are done, clean the interior of the oven with a slightly wet soapy soft cloth. IMPORTANT: Always use the middle section of the handle when opening the lid of the oven. WARNING: Carefully wash parts such as tray, grid etc before the first use of the oven. OVEN ENERGY EFFICIENCY - Ovens with high efficiency in electricity use and heat insulation should be preferred. - Frequently opening the oven lid causes cold air outside the oven to enter inside, thereby causing energy loss. Therefore, oven lid shouldn't be opened if not necessary. - You shouldn't try to cook more than one meal in the oven at once. Meals that cook earlier should be taken out first, thereby use less energy without changing oven temperature. - Residual heat after the meal cooked in the oven should be used for another meal. You will save energy this way. - Preheating should be done for a short time (10 minutes the most). - Frozen meals should be deiced before cooking in the oven. - Combustible, inflammable materials that ignite easily must be kept away from the oven. - Ovens must be installed on a location far from inflammable environments. - Ovens will continue cooking in current temperature by using less energy if the lid is closed a few minutes before cooking. 5
OVEN DESCRIPTION 1) Control Panel 2) Oven Top Resistor 3) Lamp 4) Turbo Fan 5)Wire Grill 6)Product Information Tag 7)Oven Glass 8)Front Lid 9)Handle 6
USING THE OVEN Used for setting the oven temperature between 50-250 C when working. Only put to max. position for Grill function should do the mechanic clock setup before using the oven. Otherwise the oven won't work. 1. FUNCTION SELECTION BUTTON Sets the oven working positions In the OMOXXL model, POP UP button turn to LED light indicator when the oven starts working. 2. TEMPERATURE ADJUSTMENT BUTTON Used for setting the oven temperature between 50-250 C when working. Only put to max. position for Grill function. FAN ASSISTED DEICING FUNCTION: Can be used to thaw frozen food in room temperature using the fan, quickly and without any protein loss. TURBO HEATER: Fan and surrounding heater will be activated. This program also enables cooking more than one food without their smell or taste mixing up. FULL GRILL: Double top heating elements will be activated. Used mainly for big meat portions. It is advised to place meat directly on the wire grate with a fat tray under. TIMER FUNCTION: Clock setup can only be made when no cooking program is on, you can do the adjustment with and buttons. COOKING FUNCTION: The function setting for automatic cooking and heating. STOP FUNCTION : The product won't work in this position. All functıons stop. MANUAL MODE FUNCTION: Functions are controlled by manual commands in this position. DECREASE FUNCTION: Used for decreasing the functions of all commands at the screen. INCREASE FUNCTION: Used for increasing the functions of all commands at the screen. 7
USING MECHANICAL TIMER You can adjust up to 90 minute by rotating the mechanical clock button clock wise. The clock will have the oven work for the set duration and shut it down automatically when the time is up. Set the function and temperature adjustment buttons after placing the meal inside the oven and adjust the mechanical clock button to the position you want. The oven alarm will sound and the oven will automatically shut down when the time is up. With circuit cutter, oven working duration can be set to 90 minutes maximum. It is possible to set longer cooking periods manually. For manual use, align the clock button counter clockwise to the "" symbol. You oven will start working at this position. It will continue working for the duration of your choosing. Turn the mechanical clock button clockwise when you want to end cooking. Your oven will shut down when you hear the alarm sound. USING THE PUSH BUTTON Press and eject the Push Button as shown in the figure below and adjust it. Reset and insert the button when the cooking is finished. Be careful not to leave the push button inserted when you're not using it. 8
9
10
COOLING FAN Overheating of the external surface oven and damaging its perimeter is prevented by ventilation system cooling fan. This fan creates a ventilation that enables discharge of hot air from grids (ventilation openings). The heat emanating over the oven prevents oven from reheating, also prevents overheating of the control panel and the cover and the components by creating an air curtain. Ventilation of the cooling fan prevents condensation that may occur by heat and humidity on electrical and mechanical components and makes them safer and durable. Cooling fan is enabled and disabled by the thermostat on it. In this case, as the cooling fan works based on temperature, it will run for a period even if the oven is turned off and stops automatically. MISCELLANEOUS SUGGESTIONS PROBLEM CAUSE SOLUTION Top of the meal is overcooked, bottom is undercooked. Bottom of the meal is overcooked, top is undercooked. Exterior of the meal is Bottom heat level low Top heat level low Overheating Possibly wrong cooking shelf, tray must be put to the shelf 1 lower Possibly wrong cooking shelf, tray must be put to the shelf 1 higher Wrong cooking temperature, lower heat cooked but interior is not Exterior of the meal dried Low heating Wrong cooking temperature Increase heat 11
12
DEVICE CLEANING AND MAINTENANCE GENERAL CLEANING *Unplug the device or turn the power switch to off position and cut the electricity connection of the oven before any cleaning process. *Wait for the device to cool before starting cleaning. *Clean stainless steel surfaces with commercially available special stainless steel cleaner sprays or liquids. *Make sure that the cleaning materials you will be using on your products do not contain varnish or particles that may scratch painted surfaces. *Do not use liquid cleaners that contain abrasive particles and metal sponges in order to prevent erasing the symbols while cleaning the control panel and buttons. *Do not clean the oven with bleach, hci and similar materials. *Do not try to detach buttons from the control panel as buttons cannot be detached in some models. *Never use abrasive (rubber, cleaning powder, oven sprey, abrasive hard sponge), acid (bleach) or cleaning materials containing chloride in oven cleaning. *Do not leave abrasive and acidic stains (lemon juice, vinegar etc.) on varnished, painted and stainless steel surfaces. OVEN INTERIOR *Take care of cleaning the oven after each use. *It is best to clean the varnished surface inside the oven when it is warm. *Take out trays and grids. Clean the Interior Section by wiping with a cloth soaked in soapy warm water. Afterwards, wipe with a wet cloth once and dry. *Do not use abrasive materials such as sandpaper, steel wool or bleach. Otherwise the varnished section of the oven may be damaged. *Clean the oven thoroughly with a suitable oven cleaning material periodically. *You may use cleaning material used for stainless steel or some amount of vinegar against stubborn stains. *Stains of this sort of liquids will damage the oven's shine but will not affect its performance in any way. REMOVING SIDE WIRE TRAYS OF THE OVEN It is possible to remove and clean the side wire trays in which trays and wire grids are placed easily. Follow the procedure as shown in the picture below to remove the oven interior wire trays from the side walls. 13
OVEN GLASS Clean and dry the glass lid with soft sponge and clothes. OVEN SEAL: *Condensation may occur inside the front lid and lid seal after the oven has been used for a long time. Remove the humidity with a dry cloth or sponge. *Control this seal's condition periodically. Clean without using necessary abrasive cleaning materials. *Contact the nearest BAUMATIC Authorized Service if the seal is damaged. Do not use your oven until it's fixed. REMOVING OVEN LID You can remove and clean the oven lid easily. You must follow the procedures below to remove the lid. *Open the lid completely. *Push the 2 hinges shown in the picture backwards. *Hold the lid and close up to the first stopping place. *Pull the raised lid away from its mounted location. Place the hinges correctly and push downwards in order to mount removed oven lid back properly. CHANGING OVEN BULB *Make sure the device doesn't get electricity before carrying out this procedure. *The oven bulb must have the features below. High heat resistance (up to 300 C). Electricity values: 220-240V AC 50-60 *Electricity power: 25W *E 14 connection *Oven bulb must be changed as shown in the Figure: Press the glass cover and turn counter clockwise, Remove the burnt bulb, Install the new bulb, Place the glass cover, Turn the device's power on. IMPORTANT: Disconnect the oven's electricity connection by pulling the device's plug if you decide not to use the device again. Unused devices pose a safety risk for children. Therefore, keep the oven away from children's reach. 14
15
16