STANDARD DESIGN FEATURES Width:...29 in./74 cm. Length:...132 in./335 cm. Working Height:...34 in./86 cm. All stainless steel construction with heliarc-welded seams and joints, ground and polished to a smooth finish Exhaust duct with 24 in./60 cm. X 8 in./20 cm. grill Full length specimen shelf (12 in./30 cm. wide x length of the unit ) Large radius on all inside corners for easy cleaning and required sanitation (2) Large single-compartment sinks with rapid and positive drainage (2) Cart-to-sink locking mechanisms with slide latch which can be accessed from either side of the carrier MODEL 1036-12 WALL MOUNT AUTOPSY STATION DOUBLE SINK Large instrument drawer Plumbing and electrical lines are factory-installed and require only minimum installation GFCI duplex receptacle w/ waterproof cover (2) Heavy-duty commercial waste disposers, 1/2 hp and switches Light fixture over the work area (2) Deluxe aspirators with reverse flow for additional waste removal: reverse flow feature instantly relieves suction clogging by providing a reverse pressure of water (2) Hot and cold water fixtures with convenient goose-neck faucet and wrist blade handles (2) Spray hose assemblies with cold water control valve, nozzle and 10 ft./3 m. of flexible hose Complete back-siphon protection provided by reduced pressure principle assembly Plumbing fixtures can be located in various positions depending on your desired work environment All measurements in inches/centimeters +- 3-08
HYDRO ASPIRATOR SPRAY HOSE ASSEMBLY CART LATCH w/ LOCKING MECHANISM Optional Features & Accessories See pages 3-13 to 3-15 for a full list of sink station accessories. When planning an order, we will assist you in selecting options to complete your system. Please feel free to contact us. Custom layout and designs are available. 132 / 335 SPECIMEN SHELF EXHAUST VENT (2) HOT / COLD MIXING FAUCETS W/ WRIST BLADE HANDLES (2) HAND SPRAY ASSEMBLIES W/ FLEXIBLE HOSE (2) LIGHT FIXTURE OVER DISSECTING AREA (2) HYDRO ASPIRATORS 61 / 155 29 / 74 34 / 86 FINISHED FLOOR (2) DISPOSER SWITCHES LARGE INSTRUMENT DRAWER (2) GFCI DUPLEX RECEPTACLES W/ WATER PROOF COVERS (2) CART LATCH MECHANISMS (2) REMOVABLE PERFORATED GRID PLATES (2) 1/2 HP COMMERCIAL DISPOSALS All measurements in inches/centimeters +- 3-09
When planning an order, we will assist you in selecting options to complete your system. Feel free to contact your sales associate. DISSECTING AREA RINSE ASSEMBLY Provides a constant flow of water beneath the dissecting area grid plates to wash debris toward sink and drain. Includes cold water control valve and back flow protection. EYEWASH / DRENCH HOSE Deck-mounted eyewash for hands free eye wash or can be removed for use as a drench hose for eye, face, or body use coverage. ELECTRIC ASPIRATOR Designed to provide suction that is available when you need it. 3 SIDED RINSE ASSEMBLY We provide a rinse to gently wash debris and non-viable material away from the work area. A sturdy stainless steel assembly controlled by a ON/OFF valve. SPRAY HOSE ASSEMBLY Wash off contaminates and debris with flexible and wide reaching recoil hose. EMERGENCY EYEWASH / HOSE ASSEMBLY Hand-controlled spray to provide a gentle flow of water to rinse eyes of foreign debris HANDS FREE FAUCET Toggle a steady stream of water with this motion activated sensor. EYEWASH / FAUCET ASSEMBLY Faucet-mounted eye-wash for hands-free contaminant removal GAS/AIR/VACUUM COCKS All brass with chrome plated finish. Visually marked for type of function required. HEAVY-DUTY COMMERCIAL DISPOSER (3/4HP, 1HP, 2HP) VAPOR PROOF LIGHT FIXTURE These fully weatherproof units are designed for use in moist conditions. Designed to withstand direct contact with water, these units are also corrosion proof. 3-13
When planning an order, we will assist you in selecting options to complete your system. Feel free to contact your sales associate. DISSECTING BOARDS FORMALIN DISPENSER AND COLLECTION 2.5 gl container and receptacle hold reserve formalin and collects waste. Foot controlled motor dispenses formalin at a steady flow. RAISED DISSECTING BOARDS MAGNETIC INSTRUMENT HOLDER Conveniently and safely store and organize your instruments. DISSECTING BOARDS w/ 3 LEGS WALL-MOUNTED FORMALIN SPIGOT conveniently placed formalin supply spout. LASER-ETCHED GRADUATED SINK keep track of the volume of fluid used. HEADREST (available in aluminum) FORMALIN CATCH funnels formalin supply to keep work area clean. RAISED DISSECTING AREA 3-14 RAISED BODY BOARDS elevates body away from work surface.
TES: UNLESS OTHERWISE SPECIFIED DIGITAL SCALE Compact scales are lightweight, portable and perfectly suited for laboratory and educational purposes. SCALE POLE AND MOUNTING BRACKET For use with standard hanging autopsy scale. Pole can swivel left and right, and includes locking knob. VENT CONNECTION (TOP SINK) EVIDENCE SCREEN GLOVE BOX HOLDER Stainless Steel support to hold latex and nitrile glove boxes, holders come in a side or top load model. Available in 1,2, &3 capacity. STAINLESS STEEL LEG ASSEMBLY FLUORESCENT MAGNIFIER LIGHT Flexible spring-balanced arm, handle in shade permits easy positioning. SURGICAL EXAM LIGHT Delivers bests in class intensity and color. Dual-lens optical system collects and concentrates light into a precise beam. HEIGHT ADJUSTABLE SINK MOUNT STRUCTURE & SURGICAL LIGHTING CUSTOM LAYOUT AND DESIGN We understand that every project is unique. If you have special requirements, we can modify the stations to suit your needs. A custom layout can consist of modifications to allow larger or restricted work areas, additional utilities, shelving, drawers and ventilation. 3-15