Test Report No

Similar documents
TFI Report Reaction to fire test

TFI Report Classification

MFPA Leipzig GmbH Prüf-, Überwachungs- und Zertifizierungsstelle für Baustoffe, Bauprodukte und Bausysteme

~,oeti. Report VN Classification Report. Reference

~~oeti. Report VN71 O Classification Report. Reference


Report VNLF Test Report

TFI Report Classification

Überwachte Fertigungsstätte

Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012

AGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al

D Mainz Offenbach,

Report VNNF Test Report

Report Test Report

CERTIFICATE. AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen ISO 9001:2008

ei DG UV Test EC-Type Examination (Module B) Certificate A.1/3.27 a Penetrations through "B" Class divisions (electric cable transits)

TECHNICAL SPECIFICATION

EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

Your reference Your message dated Our reference Braunschweig, Mat / Bön 8 April 2016

Z from: 1 April 2015

EC-Type Examination (Module B) Certificate. A.1/3.11 b "B" dass divisions, fire integrity

European Technical Assessment. ETA-12/0208 of 26 May English translation prepared by DIBt - Original version in German language.

European Technical ETA-10/0305 Assessment of 6 December 2017 General Part

Analysis Report

ei DG UV Test EC-Type Examination (Module B) Certificate Certificate No

ed DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit

Report Classification Report on Burning Behaviour

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

gb# DG UV Test EC-Type Examination (Module B) Certificate Certificate No A.1/3.34 Fire resisting divisions for high speed craft

V DG UV Test. EC-Type Examination (Module B) Certificate. Certificate No A.1/3.34 Fire resisting divisions for high speed craft

Manual OW Caution:

IECEx Certificate of Conformity

gb# DG UV Test EC-Type Examination (Module B) Certificate Certificate No A.1/3.34 Fire resisting divisions for high speed craft

Analysis Report

Certification of the conformity of QSCDs for server-signing with the requirements laid down in Annex II of Regulation (EU) No.

Classification Report Reaction to fire of building elements DIN EN :2007. Class E

Operating Instruction. Condensate separator CC 35

4, DG UV Test. EC-Type Examination (Module B) Certificate. A.1/3.11 a - "A" Class divisions, fire integrity

Analysis Report

European Technical Assessment. ETA-11/0288 of 10 September English translation prepared by DIBt - Original version in German language

Lawnmowers, pedestrian controlled (combustion engine powered)

ei DG UV Test EC-Type Examination (Module B) Certificate

Stanley Black & Decker Deutschland GmbH Richard-Klinger-Straße Idstein DEUTSCHLAND. Manufacturing plant Manufacturing Plant 4 and Plant 9

European Technical Assessment. ETA-09/0171 of 18 March English translation prepared by DIBt - Original version in German language.

Acceptance Requirements. Fibre Optic Systems. Revised 12/2017. December 5th, Alexander Kölbel

European Technical Assessment. ETA-08/0315 of 15 May General Part. Technical Assessment Body issuing the European Technical Assessment:

SCOPE OF ACCREDITATION. High-visibility clothing EC type examination LST EN ISO 20471:2013. EC type examination LST EN ISO 11611:2008

DECLARATION OF PERFORMANCE. No EN

edr DG UV Test EC-Type Examination (Module B) Certificate Certificate No A.1/3.34 Fire resisting divisions for high speed craft

X-TEND. Stainless Steel Cable Net Systems European Technical Approval No. ETA - 13 / 0650 ETA

CONDIMAT. World Class Conditioning of Nylon with the Vacuum- Saturated- Steam Process Patented by Welker.

DECLARATION OF PERFORMANCE. DoP: 0124 for fischer Ceiling Anchor FDZ (Metal anchors for use in concrete (light-duty type)) EN

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.

European Technical Assessment. ETA-17/0624 of 8 September English translation prepared by DIBt - Original version in German language

European Technical ETA-12/0607 Assessment of 18 January 2018 General Part

Data sheet referring to EU group safety data sheet adapted to EC-degree 1907/2006 (REACH)

European Technical Assessment. ETA-05/0069 of 3 July English translation prepared by DIBt - Original version in German language.

European Technical Assessment. ETA-08/0314 of 8 August General Part. Technical Assessment Body issuing the European Technical Assessment:

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

European Technical ETA-11/0080 Assessment of 9 February 2016 General Part

CEN/TR :2017. Framework for standardization of signatures - Extended structure including electronic identification and authentication

EN ISO/IEC :2016/AC

DECLARATION OF PERFORMANCE. No EN. Annexes B 1 to B 4

European Technical Assessment. ETA-05/0120 of 14 February English translation prepared by DIBt - Original version in German language

Technical Bulletin. Fire protection requirements for cabling systems MLAR 03/2000 MDBR 12/1998. Date: 08/2006

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 4

Research Project Simulation Wäschepflege Recommendations for Improving Resource Efficiency in the Laundry Washing Process in Households in Germany

DECLARATION OF PERFORMANCE

Centrum stavebního inženýrství a.s.

European Technical Assessment. ETA-18/0213 of 17 May English translation prepared by DIBt - Original version in German language.

English translation prepared by DIBt - Original version in German language. Nails

DECLARATION OF PERFORMANCE. No EN

Simulation Techniques for ~he Optimization of High Capacity Refrigeration in German Coal Mines

DECLARATION OF PERFORMANCE. DoP: 0135 for fischer injection system FIS EM Plus (Bonded anchor for use in concrete) EN

VdS 5477en : (01) Key deposit boxes

This European technical approval

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 6


DECLARATION OF PERFORMANCE. No EN

Brush cutters Grass Trimmers (combustion engine powered)

Your Key to achieving C.E Marking Compliance

Annex to the Accreditation Certificate D-ZM according to DIN EN ISO/IEC :2015

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

fulfils all requirements for extended protection of the criteria catalogue The appendix is part of the certificate and consists of 4 pages.

Do not operate the device in skin temperature mode with temperature sensor without patient contactl

European Technical Assessment. ETA-16/0107 of 22 March English translation prepared by DIBt - Original version in German language.

Conformity assessment procedures for the Alarm Components Scheme

Use of PE 100 supply pipes for the new construction of the BMW car factory in Leipzig. Wiesbadener Kunststoffrohrtage and 29 April 2004

Prüfurkunde - Test Certificate

DIN EN , DIN EN , DIN EN , DIN EN

SoaSA Technology International Ltd. Unit E,19/F, 2nd Wuhan Building Jiahe Road, Xiamen, Fujian China

DECLARATION OF PERFORMANCE. DoP: 0094 for Injection System fischer FIS V (Bonded anchor for use in concrete) EN

DECLARATION OF PERFORMANCE. No EN

STANDARD TEST PROCEDURE PRE-TEST QUALITY OF OPTIC FIBRE CABLE ON DRUMS TYPE OF CABLE :

Trade name of the construction product Würth concrete screw W-BS 5 and W-BS 6. This version replaces ETA-16/0128 issued on 10 May 2016

Paper and board - Determination of grammage (ISO 536:2012)

Smoke and heat control systems - Part 10: Power supplies EN Classification according to operational and environmental class

Writer member application

European Technical Assessment. ETA-12/0166 of 18 June English translation prepared by DIBt - Original version in German language.

Transcription:

TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postfach 190 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de www.tfi-online.de 1 Procedure Test Report No. 420951-01 Order...Sound absorption according to EN ISO 354:2003 Sample designation...texture 2000 wt Order by...egetaepper A/S Date of order...7 th June 2012 Your reference...l. Ormstrup TFI reference number...12-06-0110 Impact sound insulation according to EN ISO 10140:2010 Test official at TFI...Dipl.-Ing. Sophia Gelderblom, extension -134 2 Short sample description Product type...textile floor covering Type of manufacture...tufted Type of surface...cut pile Colouring / patterning...plain Fibre composition of use surface...not tested Colour...brown Type of backing...woven textile backing Page 1 of 2 Notified Body No. 1658 Vom Deutschen Institut für Bautechnik (DIBt) anerkannte Prüf-, Überwachungs- und Zertifizierungsstelle kkreditiert für die in der Anlage zur DAP-Urkunde genannten Prüfverfahren Sparkasse Aachen BIC 390 500 00 AVC 1331222 IBAN DE22390500000001331222 SWIFT AACSDE33 HRB 8157 Aachen VAT No. DE209411312 Managing Director

420951-01 3 Test results Impact sound insulation (Annex TS)...36 db Sound absorption (Annex SA)...α ω = 0,25 (H) 4 Annexes The individual results as well as type and extent of the tests can be found in the following annexes: Sound Absorption SA 420951-01 Impact Sound Insulation TS 420951-01 The annexes marked a are based on tests accredited according to EN ISO/IEC 17025. Aachen, 11.07.2012 The present document is provided with a qualified electronic signature and is valid without autograph signature. This report only applies to the tested samples and has been established to the best of our knowledge. Only the entire report shall be reproduced. Under no circumstances, extracts shall be used. Furthermore, we apply the General Terms and Conditions for the Execution of Contracts of the Textiles & Flooring Institute GmbH, also with regard to the order execution. Page 2 of 2 Notified Body No. 1658 Vom Deutschen Institut für Bautechnik (DIBt) anerkannte Prüf-, Überwachungs- und Zertifizierungsstelle kkreditiert für die in der Anlage zur DAP-Urkunde genannten Prüfverfahren Sparkasse Aachen BIC 390 500 00 AVC 1331222 IBAN DE22390500000001331222 SWIFT AACSDE33 HRB 8157 Aachen VAT No. DE209411312 Managing Director

SA 420951-01 Annex SA Sound Absorption 1 Procedure Sample designation...texture 2000 wt TFI reference number...12-06-0110 Testing period...10 th July 2012 The product identification characteristics can be found on the first page of the test report, respectively in annex KM. 2 Test method Sound absorption according to EN ISO 354:2003 The standard describes a method to measure the sound absorption level in a room. 3 Remarks Additionally, the practical and the calculated sound absorption levels according to EN ISO 11654-2:1997-07 are indicated. The test was carried out by a subcontractor. Page 1 of 4 Notified Body No. 1658 Vom Deutschen Institut für Bautechnik (DIBt) anerkannte Prüf-, Überwachungs- und Zertifizierungsstelle kkreditiert für die in der Anlage zur DAP-Urkunde genannten Prüfverfahren Sparkasse Aachen BIC 390 500 00 AVC 1331222 IBAN DE22390500000001331222 SWIFT AACSDE33 HRB 8157 Aachen VAT No. DE209411312 Managing Director

TS 420951-01 Annex TS Impact Sound Insulation 1 Procedure Sample designation...texture 2000 wt TFI reference number...12-06-0110 Testing period...10 th July 2012 The product identification characteristics can be found on the first page of the test report, respectively in annex KM. 2 Test method Impact sound insulation according to EN ISO 10140:2010 (all parts) (formerly EN ISO 140-8:1998) The standard describes a method to measure the impact sound insulation of building products in a test stand. 3 Remarks Additionally, the calculated value according to EN ISO 717-2:1997 is indicated. The test was carried out by a subcontractor. Page 1 of 2 Notified Body No. 1658 Vom Deutschen Institut für Bautechnik (DIBt) anerkannte Prüf-, Überwachungs- und Zertifizierungsstelle kkreditiert für die in der Anlage zur DAP-Urkunde genannten Prüfverfahren Sparkasse Aachen BIC 390 500 00 AVC 1331222 IBAN DE22390500000001331222 SWIFT AACSDE33 HRB 8157 Aachen VAT No. DE209411312 Managing Director