2017-08-21 Page 1 CEN System - Delegated Decisions Dispatch 34:2017 1 CEN/TC 19... 1 2 CEN/TC 54... 3 3 CEN/TC 88... 4 4 CEN/TC 112... 5 5 CEN/TC 147... 6 6 CEN/TC 169... 8 7 CEN/TC 191... 9 8 CEN/TC 193... 12 9 CEN/TC 227... 18 10 CEN/TC 251... 21 11 CEN/TC 252... 21 12 CEN/TC 256... 23 13 CEN/TC 260... 24 14 CEN/TC 278... 25 15 CEN/TC 444... 26 1 CEN/TC 19 Decision CEN/TC 19 03/2017 taken on 2017-08-15 Subject: Adoption of a New Work Item CEN/TC 19 - Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin. 19 N 1878 1. Deliverable TR The revision of a CEN/TR CEN/TR 15993:2013 CEN/TC 19/WG 21 - Specification for unleaded petrol
Page 2 4. Title Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination 5. Scope This Technical Report explains the requirements and test methods for marketed and delivered ethanol (E85) automotive fuel according to EN 15293. It provides background information to judge the text of the standard and gives guidance and explanations to the producers, blenders, marketers and users of ethanol (E85) automotive fuel. It also includes a summary of the investigations and interlaboratory studies executed and the discussions entertained by CEN that have led to the effective fuel specification. NOTE 1 This document is directly related to the pending revision of CEN/TS 15293 NOTE 2 For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively. aspects aspects? 8. Vienna Agreement 9. The project is linked to Other: This is a TR and therefore doesn't solve or address specific aspects Other: not applicable or expected CEN lead document from another organization 10. Track Vote on TS/TR by correspondence 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS SIS BSI NBN UNI NEN 14. The decision Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 21 Number of abstentions: 13
Page 3 2 CEN/TC 54 Decision CEN/TC 54 6/2017 taken on 2017-08-17 Subject: Adoption of a New Work Item CEN/TC 54 - Unfired pressure vessels 54 N 1854 1. Deliverable EN An amendment to an EN EN 13445-5:2014 CEN/TC 54/WG 55 - E - Inspection and testing 4. Title Unfired pressure vessels - Part 5: Inspection and testing 5. Scope This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2:2014. Special provisions for cyclic operation are given in Annex G of this Part. Special provisions for vessels or vessel parts ing in the creep range are given in Annex F and Annex I of this Part. NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR 13445-7. aspects aspects? Emissions to air Use of checklist 8. Vienna or expected CEN lead
Page 4 Agreement 9. The project is linked to document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/071 Yes Directive reference For citation in Official journal 2014/68/EU Yes 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR BSI DIN UNI NEN 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 14 Number of abstentions: 9 3 CEN/TC 88 Decision CEN/TC 88 763c/2017 taken on 2017-08-14 Subject: 3 year time-frame for the development of WI 00088330-9 month Tolerance Request. CEN/TC 88 - Thermal insulating materials and products considering Resolution BT 34/2002 by which BT decided that any item to result in an EN, registered after 2002-10-31, shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, to claim one tolerance of 9 months, applicable to the target dates for submission of a draft to CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA); considering that for item 00088330 - - Thermal insulation products for buildings - External thermal insulation composite systems with renders (ETICS) - Specification, it proves impossible to Dispatch ENQ draft to CMC by 2017-07-14; claims a tolerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons:
Further time is needed to solve all the comments received during the internal commenting period. Page 5 confirms that CEN/TC 88 will Dispatch ENQ draft to CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by 2018-04-14 at the latest. The decision simple majority with 15 positive vote(s), 0 negative vote(s) and 8 abstention(s). 4 CEN/TC 112 Decision CEN/TC 112 598/2017 taken on 2017-07-19 Subject: Adoption of a New Work Item CEN/TC 112 Wood-based panels 112 N 2104 1. Deliverable EN The revision of an EN EN 622-4:2009 CEN/TC 112/WG 11 - Particleboards and fibreboards 4. Title Fibreboards - Specifications - Part 4: Requirements for softboards 5. Scope This European Standard specifies the requirements for softboards as defined in EN 316, with a density - 230 kg/m3 to 400 kg/m3. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations. aspects Emissions to air
Page 6 aspects? 8. Vienna Agreement 9. The project is linked to Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR ASI SNV DIN NBN 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 16 Number of abstentions: 6 5 CEN/TC 147 Decision CEN/TC 147 013/2017 taken on 2017-06-08 Subject: Adoption of a New Work Item CEN/TC 147 - Cranes - Safety 147 N 1055
Page 7 1. Deliverable EN The revision of an EN EN 12999:2011/A2:2017 CEN/TC 147/WG 18 - Loader cranes 4. Title Cranes - Loader cranes 5. Scope This European Standard specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations. aspects aspects? 8. Vienna Agreement 9. The project is linked to This European Standard does not apply to loader cranes used on board seagoing vessel or to articulated boom systems which are designed as total integral parts of special equipment such as forwarders. The hazards covered by this standard are identified in Clause 4. This European Standard does not cover hazards related to the lifting of persons Emissions to air Heat ise/vibration Use of energy Use of land Use of materials Waste Risk to the environment from accidents/misuse Bring in expertise to the WG Use of checklist or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/396 Yes Directive reference For citation in Official journal
Page 8 2006/42/EC Yes 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS DIN DS UNI NEN 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):91.67 Number of positive votes: 12 Number of negative votes: 1 Number of abstentions: 11 6 CEN/TC 169 Decision CEN/TC 169 386/2017 taken on 2017-08-14 Subject: Adoption of a Preliminary Work Item CEN/TC 169 - Light and lighting 169 N 1475 1. Deliverable TR A new TR CEN/TC 169/WG 3 - Emergency lighting in buildings 4. Title Guidance tes on the use of dynamic signage systems
Page 9 5. Scope Emergency lighting which is designed to operate when the supply to the normal lighting fails. There is a need for a system that can cope with changing conditions such as the presence of fire, smoke or other dangers to provide a system that enables people to use safe escape routes not only during supply failures but at all times the premises are occupied. Furthermore, such systems can also indicate escape routes which should not be used to avoid dangers. There are systems that can receive signals from detectors and human intervention that can automatically activate emergency escape signage-s to direct people to safe areas and indicate the routes that are not fit for use. Such systems are called dynamic signage systems (DSS). The purpose of this CEN Technical Report is to give guidance to the design considerations of DSS. aspects - OPTIONAL aspects? - OPTIONAL 8. Track Vote on TS/TR by correspondence 9. Related 10. Related 11. The decision Simple majority Number of positive votes: 17 Number of abstentions: 7 7 CEN/TC 191 Decision CEN/TC 191 26/2017 taken on 2017-07-26 Subject: Adoption of a New Work Item CEN/TC 191 - Fixed firefighting systems 191 N 1396
Page 10 1. Deliverable EN An amendment to an EN EN 16750:2017 CEN/TC 191/WG 6 - Gas extinguishing Systems and components 4. Title Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance 5. Scope This European standard specifies oxygen reduction systems that are used as fire prevention systems by creating an atmosphere in an area which is having a lower permanent oxygen concentration as in ambient conditions. The level of oxygen reduction is defined by the individual risks of these areas (see Annex A). Oxygen reduction is achieved by technical systems which are providing a flux of air containing a reduced concentration of oxygen. This European standard specifies minimum requirements and defines the specifications governing the design, installation and maintenance of fixed oxygen reduction systems with oxygen reduced air in buildings and industrial production plants. The standard also applies to the extension and modification of existing systems. This European standard applies to oxygen reduction systems using nitrogen which are designed for continual oxygen reduction in enclosed spaces. NOTE Nitrogen is today the most suitable gas to be used for oxygen reduction. For other gases this European standard can be used as basis. This European standard does not apply to oxygen reduction systems that use water mist or combustion gases. The European standard does not apply to: - explosion suppression systems; - explosion prevention systems; - fire extinguishing systems using gaseous extinguishing agents; - inertization of portable containers; - systems in which oxygen levels are reduced for reasons other than fire prevention (e.g. steel processing in the presence of inert gas to avoid the formation of oxide film); - inerting required during repair on systems or equipment (e.g. welding) in order to eliminate the risk of fire or explosion. In addition to the conditions for the actual oxygen reduction system and its individual components this European standard also covers certain structural specifications for the protected area.
Page 11 The space protected by an oxygen reduction system is a controlled and continuously monitored indoor climate for extended occupation. This standard does not cover unventilated confined spaces that may contain hazardous gases. aspects aspects? 8. Vienna Agreement 9. The project is linked to Emissions to air Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS ASI SIS SN BSI DIN UNI NEN ILNAS 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 18 Number of abstentions: 6
8 CEN/TC 193 Decision CEN/TC 193 4C/2017 taken on 2017-04-06 Subject: Adoption of a Preliminary Work Item CEN/TC 193 - Adhesives Page 12 193 N 1994 1. Deliverable EN A new project CEN/TC 193/SC 1/WG 12 - Adhesives for non-loadbearing timber structures 4. Title Classification of wood adhesives for non-structural timber products for exterior use 5. Scope To be provided aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related
Page 13 11. The decision Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC 193 4D/2017 taken on 2017-04-06 Subject: Adoption of a Preliminary Work Item CEN/TC 193 - Adhesives 193 N 1994 1. Deliverable EN A new project CEN/TC 193/SC 1/WG 6 - Test methods and requirements for adhesives for glued-in rods and on-site repair of load-bearing structures 4. Title Adhesives - Epoxy resins for load bearing timber structures - Classification and performance requirements 5. Scope To be provided aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related
Page 14 10. Related 11. The decision Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC 193 5A/2017 taken on 2017-04-06 Subject: Adoption of a Preliminary Work Item CEN/TC 193 - Adhesives 193 N 1994 1. Deliverable EN The revision of an EN EN 14259:2003 CEN/TC 193/WG 4 - Building adhesives 4. Title Adhesives for floor coverings - Requirements for mechanical and electrical performance 5. Scope This European Standard specifies performance requirements of an adhesive when tested to a standard method with a characteristic type of floor covering. The values defined in this standard are considered to indicate a general suitability for use of an adhesive with the corresponding group of floor coverings. This standard can also be used for the evaluation of a particular floor covering with the corresponding type of adhesive. This standard does not contain criteria or recommendations for the practical installation of floor coverings. The values given in this standard also do not guarantee the complete functionality of combinations of adhesives and floor coverings in practical application.
Page 15 aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related 11. The decision Yes Directive reference For citation in Official journal 305/2011 Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC 193 5-2/2017 taken on 2017-04-06 Subject: Adoption of a Preliminary Work Item CEN/TC 193 - Adhesives 193 N 1994 1. Deliverable EN The revision of an EN EN 14293:2006 CEN/TC 193/WG 4 - Building adhesives
Page 16 4. Title Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements 5. Scope This European Standard specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength and tensile strength to be achieved with these adhesives, as well as a method for determining the open time. there are two different test methods and different minimum requirements for determing the shear strength for hard and soft adhesives. This Standard does not refer to the selection and installation of parquet floorings. aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related 11. The decision Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC 193 15bis/2017 taken on 2017-05-05 Subject: Adoption of a Preliminary Work Item CEN/TC 193 - Adhesives 193 N 1998
Page 17 1. Deliverable EN A new project CEN/TC 193/SC 1/WG 12 - Adhesives for non-loadbearing timber structures 4. Title Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading 5. Scope This European Standard specifies a method for adhesives for wood and derived solid wood products for determining the shear strength and wood failure percentage of wood-to-wood adhesive bonds loaded in compression. These parameters allow to define different ing properties of adhesives (e.g. final bond strength, pressing time, closed assembly time). aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related 11. The decision Simple majority Number of positive votes: 9 Number of abstentions: 11
9 CEN/TC 227 Decision CEN/TC 227 837/2017 taken on 2017-08-11 Subject: Adoption of a New Work Item CEN/TC 227 - Road materials Page 18 227 N 2869 1. Deliverable EN The revision of an EN EN 12697-31:2007 CEN/TC 227/WG 1 - Bituminous mixtures 4. Title Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor 5. Scope This European Standard specifies the method for compaction of cylindrical specimens of bituminous mixtures using a gyratory compactor. Such compaction is achieved by combining a rotary shearing action and a vertical resultant force applied by a mechanical head. The method is used for: - determination of the air voids content of a mixture for a given number of gyrations or derivation of a curve density (or void content) versus number of gyrations; - preparation of specimens of given height and/or at a predetermined density, for subsequent testing of their mechanical properties. Annex A, Annex B and/or Annex C describe method of complying for the equipment This European Standard applies to bituminous mixtures (both those made up in laboratory and those resulting from site sampling), with an upper aggregate size not larger than 31,5 mm. Use of energy
Page 19 aspects aspects? 8. Vienna Agreement 9. The project is linked to Use of materials Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/124 Yes Directive reference For citation in Official journal 305/2011 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS SN BSI SNV DIN NBN UNI EVS 14. The decision Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 17 Number of abstentions: 10 Decision CEN/TC 227 838/2017 taken on 2017-08-11 Subject: Adoption of a New Work Item CEN/TC 227 - Road materials 227 N 2872
Page 20 1. Deliverable EN The revision of an EN EN 12697-32:2003+A1:2007 CEN/TC 227/WG 1 - Bituminous mixtures 4. Title Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor 5. Scope This European Standard describes a test method for the preparation of bituminous test specimens using a vibratory compaction technique. This European Standard is applicable to loose mixtures and cores and is used to establish a refusal density for a bituminous mixture, or to determine the ease of compaction as described in EN 12697-10. If the mixture has been reheated, the specimen shall not be used for determining further mechanical characteristics. aspects aspects? 8. Vienna Agreement 9. The project is linked to Use of energy Use of materials Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/124 Yes Directive reference For citation in Official journal 305/2011 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SIS SN BSI DIN
Page 21 NBN UNI 14. The decision Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 15 Number of abstentions: 12 10 CEN/TC 251 DECISION 1109 taken by CEN/TC 251 on 2017-08-15 Subject: CEN/TC 251 Participation of HL7 International Foundation The CEN/TC 251 Health informatics. considering the CEN/CENELEC Internal Regulations - Part 2, subclause 4.3.2, which lays down the conditions for external liaisons; considering that the conditions laid down in CEN-CENELEC Guide 25 The concept of partnership with European organizations and other stakeholders are fulfilled; agrees to the participation of the HL7 International Foundation in CEN/TC 251; requests the CEN-CENELEC Management Centre to inform the HL7 International Foundation accordingly of this decision. The decision simple majority with 8 positive votes, 0 negative vote(s) and 16 abstentions. 11 CEN/TC 252 Decision CEN/TC 252 439 a/2017 taken on 2017-08-12 Subject: Adoption of a New Work Item CEN/TC 252 - Child care articles 252 N 1528
Page 22 1. Deliverable TR The revision of a CEN/TR CEN/TR 13387-2:2015 CEN/TC 252/WG 6 - General and common safety specifications 4. Title Child use and care articles - General safety guidelines - Part 2: Chemical hazards 5. Scope This document provides guidance information on chemical hazards that should be taken into consideration when developing safety standards for child use and care articles. In addition, these guidelines can assist those with a general professional interest in child safety. aspects aspects? 8. Vienna Agreement 9. The project is linked to ne of the above: TR Other: NA or expected CEN lead document from another organization 10. Track Vote on TS/TR by correspondence 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: ASI SIS BSI DIN UNI 14. The decision Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 12 Number of abstentions: 10
12 CEN/TC 256 Decision CEN/TC 256 C23/2017 taken on 2017-08-16 Subject: Activation of preliminary Work Item 00256765 CEN/TC 256 - Railway applications Page 23 having considered the proposal for the activation of item 00256765 currently registered at preliminary stage 00.60 as documented in CEN/TC 256 N 5345 1. Deliverable EN A new project CEN/TC 256/WG 3 - Acoustics 4. Title Railway applications - Acoustics - Measuring of door audible warnings 5. Scope This European standard describes the type test assessment method for acoustic signals at passenger external doors applying to rolling stock. The following applies to this standard: - this standard refers to acoustical passenger information indicating the release, opening and closing of passenger doors; - this standard is applicable to tonal signals with defined frequency components; - this standard is not applicable to spoken information. NOTE 1 Acoustic door signals in terms of TSI compliance are defined in EN 16584-2 "Design for PRM use". NOTE 2 Acoustic doors signals in terms of door system function are described in EN 14752. aspects aspects? Use of energy Bring in expertise to the WG
Page 24 8. Vienna Agreement 9. The project is linked to or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/483 Yes Directive reference For citation in Official journal 2008/57/EC Yes 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR LST BSI SNV DIN UNE UNI NEN HZN IPQ 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 10 Number of abstentions: 12 13 CEN/TC 260 Decision CEN/TC 260 C661/2017 taken on 2017-08-04 Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher CEN/TC 260 Fertilizers and liming materials having received and agreed upon the reasons why harmonization is no longer needed; considering that the item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following item(s):
Page 25 WI 00260185 pren 15477 - Fertilizers - Determination of the water-soluble potassium content and decides to release the standstill on these item(s). The decision simple majority with 9 positive vote(s), 0 negative vote(s) and 9 abstention(s). 14 CEN/TC 278 Decision CEN/TC 278 020/2017 taken on 2017-08-02 Subject: CEN/TC 278 - Splitting of existing item CEN/TC 278 Intelligent transport systems considering the CEN/CENELEC Internal Regulations - Part 3, clause 5, which lay down the provisions for the division of subjects to be standardized; considering the urgent and exceptional need for splitting a item; confirming that the resources needed to achieve the are committed; confirming that the scopes of the new items resulting from the splitting are strictly within the scope of the original item; decides to split the WI -00278464 - Intelligent transport systems - esafety - extending ecall to other classes of vehicle - into 5 parts, with the following titles and tracks: Title: Intelligent transport systems - esafety - Part 1: extending ecall to other categories of vehicle Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Title: Intelligent transport systems - esafety - Part 2: ecall for HGVs and other commercial vehicles Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence Title: Intelligent transport systems - esafety - Part 3: ecall for coaches and busses Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence Title: Intelligent transport systems - esafety - Part 4: ecall for UNECE Category T, R, S agricultural/forestry vehicles Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence
Page 26 Title: Intelligent transport systems - esafety - Part 5: ecall for UNECE Category L1 and L3 powered two wheel vehicles (vehicle based) Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence The decision simple majority with 11 positive vote(s), 0 negative vote(s) and 10 abstention(s). 15 CEN/TC 444 Decision CEN/TC 444 81/2017 taken on 2017-08-15 Subject: Adoption of a New Work Item CEN/TC 444 - Test methods for characterization of solid matrices 444 N 94 1. Deliverable TR A new TR CEN/TC 444/WG 3 - Inorganic analysis 4. Title Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection 5. Scope This technical report provides a supplementary description of the oxidative pyrohydrolytic combustion technique followed by ion chromatography detection for the determination of halogens and sulfur in waste samples. aspects Waste Bring in expertise to the WG
Page 27 aspects? 8. Vienna Agreement 9. The project is linked to or expected CEN lead document from another organization 10. Track Vote on TS/TR by correspondence 11. Related 12. Related Yes Directive reference For citation in Official journal 99/31/EC 2000/76/EC 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SFS SNV DIN NBN NEN UNMZ 14. The decision Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 12 Number of abstentions: 10