LQC FEATURES & SPECIFICATIONS ORDERING INFORMATION DIE-CAST ALUMINUM EXIT LED LAMPS

Catalog umber FEATURES & SPECIFICATIOS ITEDED USE Ideal for applications requiring general purpose emergency lighting exit sign. COSTRUCTIO Die-cast aluminum construction compact housing. Brushed aluminum faceplate with matte black electrostatic polymeric trim. Clear lacquer finish on brushed face inhibits fingerprints and other surface contaminants. Also available in white housing. Fully overlapping light seal prevents light leaks. Universal directional chevron knockouts are concealed and easily removed. Provisions for conduit entry and pendant mounting. U.S. Patent o. 5,739,639. Other patents pending. LAMPS Expected LED life of more than years. ISTALLATIO Universal mounting (top, end or back). Completely concealed, easily removed mounting knockouts and hole plugs. o exposed hardware. Diecast aluminum canopy provided. Faceplate accessory kit available for 1- face to 2-face field conversion. ELECTROICS Dual-voltage input capability 12 or 7 VAC. Emergency models provided with test switch, status indicator and a battery that automatically recharges when normal power is restored. BATTERY OPTIO Emergency models provided with maintenance-free, sealed nickel-cadmium battery provides 9 minutes of emergency power. LISTIG UL listed. Damp location listing 5 F to F (1 C to 4 C). Meets UL 924, FPA 11, FPA 7-EC and OSA illumination standards. WARRATY Five-year warranty. otes Type DIE-CAST ALUMIUM EXIT LQC LED LAMPS ORDERIG IFORMATIO All configurations of this product are considered "standard" and have short lead times. Example: LQC 1 R EL LQC Family LQC (blank) W ousing color Matte black, brushed aluminum face White umber of faces 1 Single face 2 Double face Letter color R Red G Green Options (blank) AC only 12/7 EL 12/7 VAC input with nickelcadmium battery back-up Accessories ELA WG1 ELA WGEXT ELA WGEXE ELA B US12 ELA LQCFPK ELA W LQCFPK Order as separate item. Back-mount wireguard Top-mount wireguard End-mount wireguard 12" pendant-mount kit with black canopy. To order white canopy, replace B with W in catalog number. To order 24" or " lengths, replace 12 with 24 or. Brushed/black faceplate kit with red and green sign panel for 1-face to 2-face field conversion White faceplate kit with red and green sign panel for 1-face to 2-face field conversion Emergency Sheet #: LQC SIEX-2

LQC Quantum Die-cast Aluminum LED SPECIFICATIOS ELECTRICAL Primary Circuit Rated Supply Input Max. Type LED life * voltage watts amps MOUTIG All dimensions are inches (millimeters). Shipping weight: 4.5 lbs. (2. kgs.) 4-3/4 (1) Red LED AC only Green LED AC only 1+ years 1+ years 12.6.5 7.7.6 12 1..5 7 1.2.6 5-3/4 (6) 8-1/4 (29) 8-3/4 (2) Red LED emergency 1+ years 12.6.5 7.7.6 11-3/4 (298) Green LED emergency 1+ years 12 1..5 7 1.2.6 2 (51) * Based on continuous operation. BATTERY (included with EL option) Sealed ickel-cadmium Shelf Expected Optimum life 1 life 1 Maintenance temperature 2 11-3/4 (298) 5-7/8 (9) 4-1/8 () 8-1/4 (29) 3 yrs. 7 9 yrs. none 3 5 F (1 4 C). 1 At 77 F ( C). 2 Optimum ambient temperature range where unit will provide capacity for 9 minutes. igher and lower temperatures affect life and capacity. Consult factory for detailed information. 3 Periodic system status test recommended for compliance with FPA 11. KEY FEATURES ELA LQCFPK Faceplate accessory kit with red and green sign panels for 1-face to 2-face field conversion. Quick-Mount installation less than 5 minutes. Unique LEDs provide extremely long life and low energy consumption. Sheet #: LQC - Acuity Brands Lighting, Inc. All rights reserved. Rev. 3//1 Lithonia Lighting Emergency Lighting Systems One Lithonia Way, Conyers, GA 312 Phone: 8-4-8694 Fax: 77-981-81 www.lithonia.com

FEATURES & SPECIFICATIOS ITEDED USE RT8B is designed for applications that require the extremely energy efficient delivery of comfortable volumetric light from a lay-in fixture that is appealing and shallow in depth and where room-side ballast access is required. Ideal for offices, schools, hospitals and numerous other commercial applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. OPTICAL SYSTEM Delivers volumetric lighting by filling the entire volume of space with light, providing the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles, distributing just enough intensity to deliver the volumetric effect. 98% reflective Alanod MIRO silver optical assembly efficiently redirects lamp output to the refractor. Regressed refractive system obscures and softens the lamp and smoothly washes the reflector with light. Linear faceted reflector softens and distributes light into the space and minimizes the luminance ratio between the fixture and the ceiling. Mechanical cut-off across the reflector and fresnel refraction along the refractor provide high angle shielding and a quiet ceiling. Sloped endplates provide a balanced fixture to ceiling ratio while enhancing the perception of fixture depth. COSTRUCTIO Impact modified acrylic prismatic refractor. One-piece, vacuumed formed PETE (poly-ethylene) trim with embossed facets. Fixtures may be mounted end-to-end. ELECTRICAL SYSTEM igh-efficiency, CEE qualified, instant-start, < 1% TD, universal voltage and sound rated A are available as quick-ship items. Optional program-start and step-dimming ballasts available. Designed and optimized for use with CEE (Consortium for Energy Efficiency) qualified, high-lumen, long life T8 lamps and energy-efficient electronic ballasts. MAITEACE Lamps accessed by unlatching trim and allowing it to hinge open for easy maintenance. Ballast is accessed from below by removing channel cover. LISTIG UL Listed (standard). Optional: Canada CSA or cul. Mexico OM. Catalog umber otes Specifications Length: 48 (12) Width: 24 (61) Depth: 3-3/ (81) FORT GILLEUM-SECTIO 1 TYPE A Type 2RT8B 2 MVOLT GEB1RS LP8 All dimensions are inches (millimeters) unless otherwise specified. 2RT8B 2'x 4' 2 Lamps T8 WARRATY Fixture guaranteed for one year against mechanical defects in manufacture. Lamp and ballast system warranty ( months for lamp, 6 months for ballast) by lamp and ballast manufacturer. Protected by one or more of US Patents os. 7,9,2; D541,467; D541,468; D544,6; D544,634; D544,992; D544,9 and additional patent pending. OTE: Specifications subject to change without notice. W D ORDERIG IFORMATIO For shortest lead times, configure product using standard options (shown in bold). Example: 2RT8B 2 MVOLT BIP L8T8 2RT8B 2 Series Trim type Lamp type Voltage Ballast Lamp 3 Options 2RT8B (blank) Lay-in grid F Overlapping flanged 2 2-lamp, W T8 (48") 347 MVOLT 1 OTES: 1 MVOLT standard for 12V-7V applications. 2 CEE qualified PT8, EMA premium ballast to qualify for many utility rebates. 3 ot available with 347 volt. 4 SIMPLY5 system includes 13' S5SSC RELOC wiring system. Specify voltage unless W (hardwire) or PWS is ordered. 5 Must specify voltage, 12 or 7. 6 For use with standard ballast. 7 For use with step-dimming ballast. BILP BIP GEB1IS BIP BSP S51 IS, high efficiency,.78 bf (low) 2 IS, high efficiency,.88 bf (normal) 2 IS,.88 ballast factor IS, high efficiency, 1.2 bf (high) 2 PS, step-dimming, high efficiency,.88 bf (normal) 2,3 1. ballast factor, SIMPLY5 system 4 L8T8 31 lumen, long life, K LP7 28 lumen, K GLR Fast-blow fuse 5 EL Emergency battery pack (see Life Safety section) EL Emergency battery pack (see Life Safety section) PWS 6' prewire, 3/8" diameter, -gauge, 3-wires 6 PWS46 6' prewire, 3/8" diameter, -gauge, 4-wires 7 QFC_ Quick-flex fixture cable, factory installed prewired cable (RELOC ) 5 W ardwire for SIMPLY5 system; replaces RELOC wiring CSA Listed and labled to comply with Canadian standards OM OM Certified Fluorescent Sheet #: 2RT8B-2x4 VRL-2

2RT8B Volumetric Recessed Lighting 2' x 4' MOUTIG DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). FORT GILLEUM-SECTIO 1 TYPE A 2RT8B 2 MVOLT GEB1RS LP8 T8 Energy Comparison System Lamp Ballast Input Watts Saved Type Factor Watts Compared to 3 lamp T8 3-lamp T8 Parabolic FT8.88 85 2RT8B 2-lamp BIP T8 FT8.88 55 3 2RT8B 2-lamp BILP T8 FT8.78 48 37 OTES: 1 Recommended rough-in dimensions for F-trim fixtures 24"x48" (Tolerance is +1/4"-"). Swing-gate range 1-3/" to 3-/". Swing-gate span -3/8" to 26-11/". Fixture swing-gate points require additional 1-1/" over nominal fixture height. POTOMETRICS 2RT8B 2, (3) FO/8 lamps, 31 lumens per lamp, s/m 1.2 (along) 1.2 (across), test no. LTL972 3 6 9 12 2 9 8 6 4 CP Summary 9 5 45 55 65 75 85 9 39 51 82 11 793 484 9 48 12 57 59 139 754 285 2 Coefficients of Utilization pf 2% pc 8% 7% 5% pw 7%5%3% 5%3%1% 5%3%1% 1 2 3 4 5 6 7 8 9 1 RCR 99 91 83 75 69 64 59 54 51 47 44 99 87 76 67 59 53 48 43 39 9 *The LER (Luminaire Efficacy Rating) is the lumens per watt rating for this fixture. It is used to compare the energy efficiency of various products. This photometric report is based upon IES testing procedures, as stated in LM-41-98. 99 84 7 6 52 45 4 29 97 85 74 65 58 52 47 43 39 97 82 69 59 51 45 4 29 97 79 65 54 46 4 31 28 92 82 71 63 56 5 45 41 38 92 79 67 58 5 44 39 29 26 92 77 63 53 45 39 34 31 Zonal Lumen Summary Zone Lumens % Lamp % Fixture - 3-4 - 6-9 9 - - 69 76 42 56 56.7 38.3 66.8 83.2. 83.2 28.5 46.1 8.3 1.. 1. Efficiency: 83.2% Sheet #: 2RT8B-2x4 29 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11//9 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 312 Phone: 8-858-7763 Fax: 77-929-8789 www.lithonia.com

FEATURES & SPECIFICATIOS ITEDED USE RT8B is designed for applications that require the extremely energy efficient delivery of comfortable volumetric light from a lay-in fixture that is appealing and shallow in depth and where room-side ballast access is required. Ideal for offices, schools, hospitals and numerous other commercial applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. OPTICAL SYSTEM Delivers volumetric lighting by filling the entire volume of space with light, providing the ideal amount to walls, cubicles, work surfaces and people. Luminous characteristics are carefully managed at high angles, distributing just enough intensity to deliver the volumetric effect. 98% reflective Alanod MIRO silver optical assembly efficiently redirects lamp output to the refractor. Regressed refractive system obscures and softens the lamp and smoothly washes the reflector with light. Linear faceted reflector softens and distributes light into the space and minimizes the luminance ratio between the fixture and the ceiling. Mechanical cut-off across the reflector and fresnel refraction along the refractor provide high angle shielding and a quiet ceiling. Sloped endplates provide a balanced fixture to ceiling ratio while enhancing the perception of fixture depth. COSTRUCTIO Impact modified acrylic prismatic refractor. One-piece, vacuumed formed PETE (poly-ethylene) trim with embossed facets. Fixtures may be mounted end-to-end. ELECTRICAL SYSTEM igh-efficiency, CEE qualified, instant-start, < 1% TD, universal voltage and sound rated A are available as quick-ship items. Optional program-start and step-dimming ballasts available. Designed and optimized for use with CEE (Consortium for Energy Efficiency) qualified, high-lumen, long life T8 lamps and energy-efficient electronic ballasts. MAITEACE Lamps accessed by unlatching trim and allowing it to hinge open for easy maintenance. Ballast is accessed from below by removing channel cover. LISTIG UL Listed (standard). Optional: Canada CSA or cul. Mexico OM. Catalog umber otes Specifications Length: 48 (12) Width: 24 (61) Depth: 3-3/ (81) FORT GILEUM-SECTIO 2 TYPE A Type 2RT8B 2 MVOLT BSP LP8 All dimensions are inches (millimeters) unless otherwise specified. 2RT8B 2'x 4' 2 Lamps T8 WARRATY Fixture guaranteed for one year against mechanical defects in manufacture. Lamp and ballast system warranty ( months for lamp, 6 months for ballast) by lamp and ballast manufacturer. Protected by one or more of US Patents os. 7,9,2; D541,467; D541,468; D544,6; D544,634; D544,992; D544,9 and additional patent pending. OTE: Specifications subject to change without notice. W D ORDERIG IFORMATIO For shortest lead times, configure product using standard options (shown in bold). Example: 2RT8B 2 MVOLT BIP L8T8 2RT8B 2 Series Trim type Lamp type Voltage Ballast Lamp 3 Options 2RT8B (blank) Lay-in grid F Overlapping flanged 2 2-lamp, W T8 (48") 347 MVOLT 1 OTES: 1 MVOLT standard for 12V-7V applications. 2 CEE qualified PT8, EMA premium ballast to qualify for many utility rebates. 3 ot available with 347 volt. 4 SIMPLY5 system includes 13' S5SSC RELOC wiring system. Specify voltage unless W (hardwire) or PWS is ordered. 5 Must specify voltage, 12 or 7. 6 For use with standard ballast. 7 For use with step-dimming ballast. BILP BIP GEB1IS BIP BSP S51 IS, high efficiency,.78 bf (low) 2 IS, high efficiency,.88 bf (normal) 2 IS,.88 ballast factor IS, high efficiency, 1.2 bf (high) 2 PS, step-dimming, high efficiency,.88 bf (normal) 2,3 1. ballast factor, SIMPLY5 system 4 L8T8 31 lumen, long life, K LP7 28 lumen, K GLR Fast-blow fuse 5 EL Emergency battery pack (see Life Safety section) EL Emergency battery pack (see Life Safety section) PWS 6' prewire, 3/8" diameter, -gauge, 3-wires 6 PWS46 6' prewire, 3/8" diameter, -gauge, 4-wires 7 QFC_ Quick-flex fixture cable, factory installed prewired cable (RELOC ) 5 W ardwire for SIMPLY5 system; replaces RELOC wiring CSA Listed and labled to comply with Canadian standards OM OM Certified Fluorescent Sheet #: 2RT8B-2x4 VRL-2

2RT8B Volumetric Recessed Lighting 2' x 4' MOUTIG DATA Continuous row mounting of flanged units requires CRE and CRM trim options (see Options). FORT GILEUM-SECTIO 2 TYPE A 2RT8B 2 MVOLT BSP LP8 T8 Energy Comparison System Lamp Ballast Input Watts Saved Type Factor Watts Compared to 3 lamp T8 3-lamp T8 Parabolic FT8.88 85 2RT8B 2-lamp BIP T8 FT8.88 55 3 2RT8B 2-lamp BILP T8 FT8.78 48 37 OTES: 1 Recommended rough-in dimensions for F-trim fixtures 24"x48" (Tolerance is +1/4"-"). Swing-gate range 1-3/" to 3-/". Swing-gate span -3/8" to 26-11/". Fixture swing-gate points require additional 1-1/" over nominal fixture height. POTOMETRICS 2RT8B 2, (3) FO/8 lamps, 31 lumens per lamp, s/m 1.2 (along) 1.2 (across), test no. LTL972 3 6 9 12 2 9 8 6 4 CP Summary 9 5 45 55 65 75 85 9 39 51 82 11 793 484 9 48 12 57 59 139 754 285 2 Coefficients of Utilization pf 2% pc 8% 7% 5% pw 7%5%3% 5%3%1% 5%3%1% 1 2 3 4 5 6 7 8 9 1 RCR 99 91 83 75 69 64 59 54 51 47 44 99 87 76 67 59 53 48 43 39 9 *The LER (Luminaire Efficacy Rating) is the lumens per watt rating for this fixture. It is used to compare the energy efficiency of various products. This photometric report is based upon IES testing procedures, as stated in LM-41-98. 99 84 7 6 52 45 4 29 97 85 74 65 58 52 47 43 39 97 82 69 59 51 45 4 29 97 79 65 54 46 4 31 28 92 82 71 63 56 5 45 41 38 92 79 67 58 5 44 39 29 26 92 77 63 53 45 39 34 31 Zonal Lumen Summary Zone Lumens % Lamp % Fixture - 3-4 - 6-9 9 - - 69 76 42 56 56.7 38.3 66.8 83.2. 83.2 28.5 46.1 8.3 1.. 1. Efficiency: 83.2% Sheet #: 2RT8B-2x4 29 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11//9 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 312 Phone: 8-858-7763 Fax: 77-929-8789 www.lithonia.com

Catalog umber FEATURES & SPECIFICATIOS ITEDED USE For applications that require the clean appearance of a low profile, brightness controlled wraparound. Provides broad distribution of light for offices, schools and corridors. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. ATTRIBUTES Curved prismatic diffuser with linear side prisms minimize lamp image and provides high angle brightness control. Luminous end plates soften appearance for improved aesthetics. COSTRUCTIO Metal parts are die formed from code-gauge steel. Prismatic diffuser is 1% acrylic with sonically welded luminous ends. Continuous side flanges on fixture body provide light trap and continuous diffuser support to prevent accidental opening and simplify maintenance. FIIS Five stage iron-phosphate pretreatment assure superior paint adhesion and rust resistance. Painted parts finished with high-gloss, high-reflectivity baked white polyester enamel (low VOC). ELECTRICAL SYSTEM Thermally-protected, resetting, Class P, PF, non-pcb, UL Listed, CSA certified ballast is standard. Luminaire is suitable for damp locations. AWM, TF or T wire used throughout, rated for required temperatures. UL/CSA listed ballast disconnect w/strain relief and leads provided standard. LISTIG UL Listed (standard). Optional: Canada CSA or c-ul. Mexico OM. WARRATY Guaranteed for one year against mechanical defects in manufacture. otes Specifications T8 Length: 24 (61.) 48 (1.) or 96 (243.9) T5 Length: 46.5 (1.1).5 (57.2) Width: 1 (.4) Depth: 3 (7.62) All dimensions are inches (centimeters). Specifications subject to change without notice. Low-Profile Wraparound LB W Type T5 and T8 2 lamps arrow body 2', 4' or 8' length ORDERIG IFORMATIO For shortest lead times, configure product using standard options (shown in bold). Example: LB 2 MVOLT GEB1IS LB 2 Series LB 2 lamps, 1" wide For tandem, doublelength unit, add prefix T. Example: TLB umber of lamps 2 ot included Lamp type W T8 (24") W T8 (48") W T5 (.5") 2 28 28W T5 (46.5") 2 Voltage 12 7 347 MVOLT Others available Options 1/4 One, four-lamp ballast GEB1IS Electronic ballast, <1% TD, instant start GEB1PS Electronic ballast, <1% TD, program start EL Emergency battery pack (nominal 3 lumens, see Life Safety Section) GLR Internal fast-blow fuse 1 GMF Internal slow-blow fuse 1 LSC Lens safety clips (2 per fixture) LP_ Lamped; specify lamp type and color CSA Listed and labeled to comply with Canadian Standards SSR Specular silver interior finish (95% reflective) OTES: 1 Must specify voltage. 2 All T5 lamp types use GEB1PS ballast only. SQ 1B DS24 Accessories Order as separate item Swivel-stem hanger (specify in 2" increments). Ceiling spacer (adjusts from 1-1/2" to 2-1/2" from ceiling). Double stem hanger for 4' fixtures, 24" stems. Fluorescent Sheet #: LB WRAP-

LB Low-Profile Wraparound, arrow Body MOUTIG DATA For unit or row installation, surface or stem mounting. Stem mounting not hang- available on TLB. Individual installation One double-stem (4'only) or two single-stem ers required. Row installation One hanger per fixture plus one per row required. See ACCESSORIES below for hanging devices. DIMESIOS Inches (centimeters). Subject to change without notice A = 1/4 x 1/2 (.6 x 1.) Oval ole B = 1/4 x 1/2 (.6 x 1.) K.O. C = 7/8 (2.) Dia.K.O. D = 11/ (1.74) Dia. K.O. E = 2 (5.8) Dia. K.O. and 7/8 (2.) Dia. K.O. G = 1-1/8 (2.85) Dia. K.O. DS POTOMETRICS Calculated using the zonal cavity method in accordance with IESA LM41 procedure. Floor reflectances are 2%. Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request. LB 2 Report LTL 547 Lumens per lamp = S/M (along) 1.3 (across) 1.4 Coefficient of Utilization Ceiling 8% 7% 5% % Wall 7% 5% 3% 7% 5% 3% 5% 3% 1% % 87 87 87 83 83 83 77 77 77 63 1 79 76 72 76 73 7 67 65 63 53 2 73 67 62 69 64 6 6 56 53 45 3 67 6 54 64 57 52 54 49 46 39 4 62 53 47 59 51 46 48 43 4 34 5 57 48 41 54 46 4 43 38 34 3 6 52 43 37 5 42 39 34 3 26 7 48 39 46 37 3 26 8 44 29 43 34 28 2 9 41 31 39 3 29 24 2 1 38 28 37 28 26 Energy (Calculated in accordance with EMA standard LE-5) AUAL LAMP LAMP BALLAST LER.FW EERGY COST* DESCRIPTIO LUMES FACTOR WATTS 62 $3.63 (2) W T8 285.88 61 *Calculated in accordance with EMA Standards LE-5. Zonal Lumens Summary Zone Lumens %Lamp %Fixture -3 1.7 24.9-4 98 31.1 41.4-6 3 5.9 67.8-9 3847 63.1 84. 9-7 12.1. - 4582 75.1 1. Sheet #: LB 2 Acuity Brands Lighting, Inc, All rights reserved, Rev. 11//9 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 312-3957 Phone: 8-858-7763 Fax: 77-929-8789 www.lithonia.com

Catalog umber FEATURES & SPECIFICATIOS ITEDED USE Surface or stem-mounted lensed fixture for general illumination in commercial offices and retail applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. COSTRUCTIO Metal parts are die-formed from code gauge steel. o asbestos is used in this product. Standard door is fully gasketed flush steel with sturdy tee hinges and opposing, rotary-action cam latches. Optional flush or regressed aluminum doors available. Smooth side panels and square corners for modular appearance. FIIS Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. OPTICAL SYSTEM Diffuser is 1% virgin acrylic. ELECTRICAL SYSTEM Thermally protected, resetting, Class P, PF, non- PCB, UL listed, CSA Certified ballast is standard. Sound rated A. Standard combinations are CBM approved and conform to UL 9. Fixture is suitable for damp locations. AWM, TF or T wire used throughout, rated for required temperatures. Listed ballast disconnect with strain relief and leads provided standard for nonemergency fixtures. ISTALLATIO For surface or stem mounting, unit or row installation. Stem-mounting unit installation requires two single-stem hangers per 4-foot unit. Row installation requires one hanger per fixture plus one per row. LISTIG 12V, 7V and MVOLT are UL Listed and CSA Certified (standard). 347V is CSA Certified (see Options). WARRATY Guaranteed for one year against mechanical defects in manufacture. otes Specifications Length: 48 () eight: 3-3/4 (95) Width: 12 () All dimensions are inches (millimeters). Specifications subject to change without notice. Type Modular Commercial M 1X4 STRAIGT LAMPS 1, 2 or 3 lamps ORDERIG IFORMATIO For shortest lead times, configure product using standard options (shown in bold). Example: M 2 A MVOLT GEB1IS M Series Lamps Lamp type Diffuser Voltage Options M 1 2 3 ot included. W T8 (48") Frame type (blank) White (flush steel) F atural (flush aluminum) FM Matte black (flush aluminum) FW White (flush aluminum) R atural (regressed aluminum) RM Matte black (regressed aluminum) RW White (regressed aluminum) OTES: 1 All 1x4 1-lamp and 3-lamp models have internal side mounted ballast. Stem mounting is not recommended. 2 MVOLT standard for 12V and 7V applications. Some options require voltage specified. 3 Must specify voltage. A12 A1 A K2 PC1S #12 pattern acrylic #12 pattern acrylic,.1" thick # pattern acrylic,.6" thick #2 pattern acrylic,." thick Parabolic plastic cube louver, specular silver 12 7 347 MVOLT 2 Others available. Shipped installed in fixture 1/3 One 3-lamp ballast GEB1IS T8 electronic ballast, <1% TD, instant start GEB1RS T8 electronic ballast, <1% TD, rapid start EL Emergency battery pack (nominal 3 lumens) EL Emergency battery pack (nominal lumens) LP7 Lamped; 7 Series; K LP Lamped; specify lamp type and color GLR Internal fast-blow fusing 3 GMF Internal slow-blow fusing 3 RIF1 Radio interference filter (1 per fixture) 3 SLL Spring-loaded latch CSA CSA Certified (347V only) OM OM Certified Accessories: Order as separate catalog number. SQ_ Swivel stem hanger (specify length in 2" increments). 1 1B Ceiling spacer (1-1/2" to 2-1/2" from ceiling). DS24 Double stem hanger for 4' fixtures, 24" stems. 1 Fluorescent Sheet #: M-1x4 WRAP-26

M 1x4 Straight Lamps, Modular Commercial MOUTIG DATA For unit or row installation. Surface or stem mounting. 1 UIT ISTALLATIO Minimum of two hangers required. ROW ISTALLATIO One hanger per fixture plus one per row required. DIMESIOS All dimensions are inches (millimeters). Specifications subject to change without notice. C = 7/8 (2.) Dia.K.O. D = 11/ (1.74) Dia. K.O. E = 2 (5.8) Dia. K.O. OTES: 1 All 1x4 1-lamp and 3-lamp models have internal side mounted ballast. Stem mounting is not recommended. POTOMETRICS Calculated using the zonal cavity method in accordance with IESA LM41 procedure. Floor reflectances are 2%. Lamp configurations shown are typical. All data based on C. Full photometric data on these and other configurations available upon request. M 2 A12 Report LTL 5574 Lumens per lamp = 29 S/M (along) 1.2 (across) 1.2 Coefficient of Utilization Ceiling 8% 7% 5% % Wall 7% 5% 3% 7% 5% 3% 5% 3% 1% % 62 62 62 61 61 61 58 58 58 52 1 58 56 54 56 55 53 52 51 5 46 2 54 5 47 52 49 46 47 45 43 4 3 5 45 41 48 44 41 43 4 37 4 46 4 45 4 38 31 5 42 41 31 28 6 39 28 38 28 31 28 24 7 3 29 28 8 26 26 9 31 24 2 3 24 2 2 1 29 28 M 3 A12 Report LTL 5576 Lumens per lamp = 29 S/M (along) 1.3 (across) 1.3 Coefficient of Utilization Ceiling 8% 7% 5% % Wall 7% 5% 3% 7% 5% 3% 5% 3% 1% % 69 69 69 68 68 68 65 65 65 58 1 64 62 6 63 61 59 58 57 55 51 2 59 55 52 58 54 51 52 5 47 44 3 55 5 46 54 49 45 47 44 41 39 4 51 45 4 5 44 4 42 39 34 5 47 4 46 39 38 34 31 29 6 43 31 42 31 31 28 26 7 4 28 39 28 31 24 8 37 29 29 24 28 24 2 9 34 26 26 1 24 2 31 24 Zonal Lumens Summary Zone Lumens %Lamp %Fixture -3 1.8 34. -4 47 28.4 54.3-6 26 45.1 86.3-9 4 52.3 1. 9-.. - 4 52.3 1. Zonal Lumens Summary Zone Lumens %Lamp %Fixture -3 68.2.9-4 1 31.2 53.5-6 41 5. 85.9-9 565 58.2 1. 9-.. - 565 58.2 1. Energy (Calculated in accordance with EMA standard LE-5) AUAL LAMP LAMP BALLAST LER.FW EERGY COST* DESCRIPTIO LUMES FACTOR WATTS 47 $5. (2) W T8 285.93 6 *Calculated in accordance with EMA Standards LE-5. Sheet #: M-1x4 96 Acuity Brands Lighting, Inc., All rights reserved, Rev. 11//9 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 312 Phone: 8-858-7763 www.lithonia.com

Catalog umber FEATURES & SPECIFICATIOS ITEDED USE Ideal for a wide variety of low- to medium-height ceiling applications including commercial, retail and hospitality spaces where a wet location lensed fixture is required. Ideal for shower and outdoor applications. OPTICAL SYSTEM Aluminum clear specular full reflectors are optically designed to maximize lumen output and to provide superior glare control. Glass lenses are available in clear flat, tempered prismatic or fresnel glass lens to provide optimal visual comfort and improved aesthetics. MECAICAL SYSTEM eavy gauge die formed galvanized steel mounting frame. Attached to frame are vertically adjustable mounting brackets for use with C channels, ½ steel conduit or gauge flat bar hangers included, standard. Frames equipped with galvanized junction box UL Listed for through wire applications. Junction boxes equipped with (2) ¾ and (4) ½ conduit knockouts with pryout slots and removable access doors. Retaining clips packed with reflector for installation on rough-in. Maximum 1-1/2" ceiling thickness. ELECTRICAL SYSTEM Electronic ballast with end of lamp life protection standard. Class P thermally protected ballast protects against improper contact with insulation. Minimum starting temperature is F/- C. Rated for #12 AWG conductor thru-branch wiring. Minimum 9 supply wire. Ground wire provided. Lamp Socket Base: TRT 4-pin lamps 26W (GX24Q-3); W (GX24Q-3); 42W (GX24Q-4) LISTIG Fixtures are UL Listed for thru-branch wiring, on-ic recessed mounting, wet location, and to U.S. and Canadian Safety Standards. otes Specifications Max. height: 6-3/8 (.2) Ceiling opening: 7 (.8) Overlap trim: 7-1/2 (.1) Length: 13 (.) Width: 11 (.9) All dimensions are inches (centimeters). Type Compact Fluorescent Downlighting 6 LF6 WET LES orizontal 1-Lamp, Triple Tube (TRT) 7-1/2 (.1) 6-3/8 (.2) 13 (.) 6-3/8 11 (.9) 7-1/2 ORDERIG IFORMATIO For shortest lead times, configure product using standard options (shown in bold). Example: LF6 1/26-42TRT F6LS4 MVOLT LF6 Series LF6 Wattage/lamp 1/26-42TRT 1 1/26TRT 1/TRT 1/42TRT OTES: 1 ot available with ADEZ or DML. 2 White painted flange standard. 3 Electronic multi-volt ballast capable of operating any line voltage from 12-7V, 5 or 6z. 4 ot available with EL or ELR. 5 Add 3 (7.6) to width and 4-1/2 (11.4) to length. 6 ot recommended for field installation. Reflector/color 2 F6LS1 White splay, white lens F6LSB1 Black baffle, white lens F6LS4 White splay, fresnel lens F6LSB4 Black baffle, fresnel lens F6LS73 White splay, tempered prismatic lens F6LSB73 Black baffle, tempered prismatic lens SCA6 CTE6 Accessories Voltage MVOLT 3 12 7 347 4 Order as separate catalog number Sloped ceiling adaptor. Degree of slope must be specified (1D, D, 2D, D, 3D) Ex: SCA6 1D. Ceiling thickness extender is used when ceiling thickness is greater than 1-1/2 (3.8). Maximum thickness 2 (5.1). ADEZ DML EL ELR ELRL GMF BDP RIF1 LB WLP Options Advance Mark 1 electronic dimming ballast, 12V or 7V. Minimum dimming level 5% Lutron Compact SE electronic dimming ballast, 12V or 7V. Minimum dimming level 5% Emergency battery pack with integral test switch. Lens removal required before EL testing 5 Emergency battery pack with remote test switch 5 igh lumen emergency battery pack. Remote test switch provided. Maximum output is 1,3 lumens (42W). 6 Single slow-blow fuse, must specify voltage Ballast disconnect plug (meets codes that require in-fixture disconnect) Radio interference filter Less barhangers K lamp (shipped separately) Downlighting and Track Sheet #: LF6-WETLES-1-TRT

6 LF6 orizontal 1-Lamp, Triple Tube (TRT), Wet Lens Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 3 Above Floor for a Single Luminaire LF6 1/TRT F6LS73 MVOLT, (1) Philips PL-C W/S lamp, 1.2 s/mh, rated lumens, Test no. LTL2 1 2 3 4 5 9 7 5 1 3 5 45 55 65 75 85 9 cp 5 5 471 373 2 5 86 48 3 Lumens 49 1 8 12 78 47 3 Zone - 3.9-4 58.7-6 76.1-9 779.8 9 -. - 779.8 Lumens % Lamp *Total Efficiency.6.2 29.4.5. *.5 pf 2% pc 8% 7% 5% pw 5% 3% 5% 3% 5% 3% 1 2 3 4 5 6 7 8 9 1 39 31 28 26 24 2 39 34 3 26 38 34 31 28 2 38 29 26 3 28 Task eight: 2.5ft. 5% beam - 52.1 1% beam - 9.8 Inital FC Mounting eight Center Beam Diameter FC Diameter FC 8. 1. 12....3 9.3 5.8 4. 2.9 5.4 7.3 9.3 11.2 13.2 8.6 4.7 2.9 2. 1.4 11.2.2.3.3.4 1.7.9.6.4.3 TEST O: LTL3 LUMIAIRE CATALOG O.: F6LS73 (42TRT) LUMES PER LAMP: 4 12 2 28 44 52 6 Polar Plot 1 2 9 8 7 6 5 4 3 Intensity Distribution orizontal Angle Vertical Angle 5 45 55 65 75 85 9 663 644 568 452 313 24 111 65 4 Zonal Lumen Summary Zone Lumens % Lamp - 3-4 - 6 447.3 65.7 95.1. 2.3 28.3-9 1. 31.2 9 -.. - 1. * 31.2 *Total Efficiency RCR Coefficients of Utilization pf 2% pc 8% 7% 5% pw 5% 3% 5% 3% 5% 3% 1 2 3 4 5 6 7 8 9 1 37 34 3 37 29 2 13 3 24 2 28 2 13 29 26 24 2 31 24 2 13 Energy (Calculated in accordance with EMA standard LE-5.) Fixture/ LER Annual* Lamps Lamp Ballast Input Reflector Energy Cost Lumens Factor Watts LF6 1/TRT/F6LS73.2 $7.5 (1) W TRT 24.98.6 *Comparative yearly lighting energy cost per 1 lumens Sheet #: LF6-WETLES-1-TRT 29 Acuity Brands Lighting, Inc., Rev. 9/2/9 Lithonia Lighting Recessed Downlighting and Track One Lithonia Way, Conyers, GA 312 Phone: 8-3-49 Fax: 77-9-129 www.lithonia.com

Catalog umber FEATURES & SPECIFICATIOS ITEDED USE For wall or ceiling mounting vertical or horizontal. Ideal for stairwells, corridors, lavatories or any utility application. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. ATTRIBUTES Easy maintenance design for individual or tandem mounting. For row mounting, order RMT option. COSTRUCTIO eavy-duty code grade steel. Metal parts are die-formed. FIIS Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Standard finish is high-gloss, high reflectivety, baked white polyester (architectural black available). OPTICAL SYSTEM Available with high performance A12 pattern clear acrylic or low brightness matte white opal acrylic. Front metal fascia eliminates direct illumination. Provides up/down distribution. ELECTRICAL SYSTEM AWM, TF or T wire used throughout, rated for required temperatures. UL/CSA Listed ballast disconnect with strain relief and leads provided standard. ISTALLATIO End caps spring-loaded for easy diffuser removal. LISTIG UL Listed to US and Canadian safety standards. Optional: Mexico OM. WARRATY Guaranteed for one year against mechanical defects in manufacture. otes Specifications Length: 24 (69), (9) or 48 (12) Width: 4-5/8 (1) Depth: 4-9/ (1) Weight: lbs (6.3 kg) Type Commercial Wall Bracket WC T5 and T8 2', 3' or 4' Lengths 1 or 2 Lamps All dimensions are inches (millimeters). Specifications subject to change without notice. ORDERIG IFORMATIO For shortest lead times, configure product using standard options (shown in bold). Example: WC 2 12 MVOLT GEB1IS WC Series WC All purpose wall bracket umber of lamps 1 2 ot included. Lamp type W T8 (24") W T8 (") W T8 (48") W T5 (24") 2 W T5 (") 2 28 28W T5 (48") 2 24 24W T5O (24") 2 39 39W T5O (") 2 54 54W T5O (48") 2 OTES: 1 For optional locations, consult factory. 2 All T5 lamp types use GEB1PS ballast only. 3 Includes continuous row joiner band. ot available with CSA; models requiring CSA labeling ship standard with joiner band. Diffuser type (blank) Matte white opal acrylic A12 #12 pattern acrylic FAC Matte white opal acrylic with front metal fascia FA12 #12 pattern acrylic with front metal fascia Voltage 12 7 347 MVOLT 1 Others available. Options CO Grounded convenience outlet, 12V only (lower right) 1 S1 Pull-chain switch; installed bottom right; on/off operation of all lamps only (12V only) 1 GEB1IS Electronic ballasts, <1% TD, instant-start GEB1PS Electronic ballasts, <1% TD, program-start MB Architectural black finish RMT Row mount 3 CSA CSA Certified Fluorescent Sheet #: WC WALL-12

WC Wall Bracket, All Purpose MOUTIG DATA DIMESIOS Inches (millimeters). Subject to change without notice. C = 7/8 () Dia. K.O. D = 11/ () Dia. K.O. E = 2(51) Dia. K.O. G = 1-1/8 (29) Dia. K.O. POTOMETRICS Calculated using the zonal cavity method in accordance with IESA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounting 7' above floor. Reflectances 8/5/2%. Full photometric data available upon request. Vert. oriz. WC 2 Report LTL 57 Initial point illuminance on wall and horizontal work surface (fc) X and Y coordinates are on 12" centers. X A B C D E F G I J K 9 3 4 6 11 11 6 4 4 8 3 4 6 31 31 6 4 3 7 2 3 3 3 3 2 6 2 3 5 28 3 28 5 3 2 5 2 2 4 6 8 9 8 6 4 3 2 4 2 2 3 3 4 4 4 4 3 2 2 3 2 2 2 3 3 3 3 3 2 2 2 2 1 2 2 2 2 2 2 2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 1 Y 1 6 7 8 9 1 1 1 9 8 6 5 2 6 7 8 1 11 11 11 1 9 7 6 3 6 7 8 1 11 11 11 1 9 7 7 4 7 7 8 1 11 11 11 1 9 8 7 5 6 7 8 9 1 1 1 9 9 7 7 6 6 7 7 9 9 9 9 9 8 7 6 7 5 6 6 7 7 7 7 7 7 6 5 8 5 5 6 6 7 7 7 6 6 5 5 9 5 5 5 6 6 6 6 6 6 5 5 1 4 4 4 4 5 5 5 4 4 4 4 11 3 3 4 4 4 4 4 4 4 3 3 12 3 3 3 4 4 4 4 4 4 3 3 13 2 2 3 3 3 3 3 3 3 2 2 Sheet #: WC 2 Acuity Brands Lighting, Inc., All rights reserved, Rev. 11//9 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 312-3957 Phone: 8-858-7763 Fax: 77-929-8789 www.lithonia.com

FORT GILLEUM-SECTIO 1 TYPE F AWLT MD CF-2-BZ W/LAMP

FORT GILLEUM-SECTIO 2 TYPE F AWLT MD CF-2-BZ W/LAMP

FORT GILLEUM-SECTIO 2 TYPE FE AWLT MD CF-2-12-EM W/LAMP

Catalog umber FEATURES & SPECIFICATIOS ITEDED USE Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. COSTRUCTIO One-piece, extruded aluminum housing with brushed finish and chrome trim. Woodgrain vinyl laminated to injection-molded ends brushed aluminum end appliques optional. Up/down light distribution options. Lens housing secured to channel assembly by spring-loaded latches. Gasketed back plate and silicone-sealed housing eliminate light leaks. Convenience outlet available on 12V units. Parts are die-formed from code-gauge steel. Finish: Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Standard finish is high-gloss, baked white enamel. All parts PAF. Ballast is thermally-protected, Class P, PF, non-pcb, UL listed, CSA certified ballast is standard. Sound rated A. ELECTRICAL Fixture conforms to UL 7 and is suitable for damp locations. AWM, TF or T wire used throughout, rated for required temperatures. Luminaire Efficacy Rating (LER) and Annual Energy Cost: Two-lamp LER.FW = 58. Annual Energy Cost = $4.. Based on W T8 lamp (285 lumens) and energy-saving electronic ballast. Ballast factor =.88, input watts = 54. Calculated in accordance with EMA standard LE-5. LISTIGS UL listed and labeled. Listed and labeled to comply with Canadian and Mexican Standards (see Options). Specifications subject to change without notice. otes Type Surface Commercial W COTEMPORARY WALL BRACKET 1', 2', 3' or 4' Lengths 1 or 2 Lamps ORDERIG IFORMATIO Lead times will vary depending on options selected. Consult with your sales representative. Example: W 2 12 GEB CO W W Series Wall Bracket umber of lamps 1 2 ot included. Lamp type U W T8 U (12") 1 W T8 (24") CF W TT5 RS (12") 2 2W T12 (24") W T8 (") 3 3W T12 (") W T8 (48") 4 4W T12 (48") OTES: 1 One lamp only. 2 MVOLT available with GEB1IS only. 3 For optional locations, consult factory. 4 BF option must be specified if separation of up and down light is desired. 5 Requires 2/1 option (2-lamp only). 6 Required with S2 or S4 options. (blank) Diffuser type/ light distribution A12U DO #12 pattern.1" thick lower lens, matte white; #12 pattern.7" thick upper lens #12 pattern.1" lower and upper lens Downlight only Voltage 12 7 347 MVOLT 2 Others available. Options CO Grounded convenience outlet, 12V only (lower right) 3 AE Brushed aluminum end cap appliques S1 Pull-chain switch; installed bottom left; on/off operation of all lamps only (12V only) 3 S2 Pull-chain switch, on/off operation of forward (down) lamp, rear (up) lamp remote-switched (12V only) 3,4,5 S4 Pull-chain switch; four position front only, rear only, all on, all off; installed bottom left (12V only) 3,4,5 2/1 Two 1-lamp ballasts 4,6 BF Internal baffle for up and down light separation GEB Electronic ballasts, < 2% TD GEB1IS Electronic ballasts, < 1% TD, Instant Start GEB1RS Electronic ballasts, < 1% TD, Rapid Start ES Energy saving ballasts Unswitched night light for 7W C7 lamp; top left (12V only) S ight light with push-switch for 7W C7 lamp; top left (12V only) MB Matte black finish MW Matte white finish CSA Listed and labeled to comply with Canadian Standards OM Listed and labeled to comply with Mexican Standards Fluorescent Sheet #: W

W Wall Bracket, Contemporary MOUTIG DATA DIMESIOS Inches (millimeters). Subject to change without notice. (381) E = 2(51) Dia. K.O. R = Keyhole Slot POTOMETRICS Full photometric reports available upon request. Sheet #: W 83- Acuity Brands Lighting, Inc., All rights reserved, Rev. 1/26/1 Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 312 Phone: 8-858-7763 www.lithonia.com

FORT GILEUM-SECTIO 1 TYPE MS PP2 12/7 VOLT POWER PACKS AD SLAVE PACKS TYPICAL APPLICATIOS Used with Low Voltage Sensors Multiple Sensors Multiple Loads AC Switching Only IGLIGTS Dual Voltage Transformer Self-Contained Relay Patented Relay Circuit Protection (Tested to over 4, cycles) Powers up to sensors SPECIFICATIOS Size:(1/2 inch chase nipple not inc.) PP-2-2P: 4 1 /8 x 3 x 1 7 /8 PP-2 & SP-2: 3 x 2 1 /4 x 1 7 /8 Mounting: 1/2 inch chase nipple Operating Voltage: 12, 24, or 7 VAC (Single Phase only) Each Relay: 2 Amps 1 P Motor Load Output Voltage: VDC, ma at 12 or 7 VAC Class II: AWG, up to 2, ft. Plenum Rated Relative umidity: 2 to 9% non-condensing Operating Temp: º to º F Storage Temp: -º to º F UL and CUL Listed 5 Year Warranty Made in U.S.A. LOW TEMP/I UMIDITY(-LT) Conformally Coated PCB Operates down to -4º F Corrosion resistant from moisture PLEUM COSIDERATIOS Most local codes allow for small plastic controls in Return Air Plenums; Some Do ot! To meet local code, the Power Pack can be mounted inside an adjacent (Deep) junction box as shown below. PP-2 PP-2-2P SP-2 Plenum Rated Power Packs are the heart of the Low Voltage Sensor System. The PP-2 transforms 12, 24 or 7 Volts (single phase) to class II VDC to power the remote sensors. Utilizing Patented Relay Circuit Protection the PP-2 also switches the lighting load "On" and "Off": Tested to over 4, cycles at rated load! Although Plenum Rated, the elongated mounting nipple allows for the PP-2 to be mounted either directly thru a 1/2 inch knockout in a junction box, or to be located inside an adjacent box for specific local code requirements. Up to sensors may be connected to one PP-2. Multi-circuit control can be handled by multiple PP-2's, or 2-Pole Power Packs (PP-2-2P) and Slave Packs (SP-2) may be configured. PP-2's can be wired continuously hot (line side), or on the switch leg (load side) without nuisance delays upon turn "On". LOW VOLTAGE OPERATIO AD TEST The Low Voltage Wires or Terminal is color coded Red ( VDC), Black (Common), and White (Occupancy Signal). With no sensors connected, using a small wire, connect the Red terminal to the White. The lights should turn "On". Remove the connection and the lights should turn "Off". With the sensors connected, the Red and Black wires provide DC power to the remote sensors, and when there is occupancy detected, the White wire produces a VDC signal from the sensor to the power pack initiating the lights to "On". Upon initial power up, the Sensors automatically send an "On" signal until the sensors have stabilized and "Timed Out". SIZIG OF TE SYSTEM - VARIOUS COMBIATIOS Combining Power Packs provides for additional power to drive remote devices. Maximum numbers of remote sensors are shown below based on the Power Pack/Slave Pack being used. Maximum number of "Relays" is 3. Sensors Sensors with Relay 1 PP-2 8 1 PP-2-2P 7 6 1 PP-2 w/sp-2 7 6 1 PP-2-2P w/sp-2 5 5 2 PP-2 28 2 PP-2-2P 12 ote 1: Only three relays may be controlled with one Power Pack. If more than three circuits are required, multiple Power Packs must be used. ote 2: Only one "Sensor with Relay" is required in most cases. See Technical Datasheet on Low Voltage Sensors with -R Interface Option. SYSTEMS COSIDERATIOS The local override switch may be upstream or downstream of a PP-2. owever, if an SP-2 Auxiliary Relay or a PP-2-2P controller is being used, the switch(es) should be downstream on the load side of the relay. If power is disconnected to the Power Pack all subsequent relays will open, turning off all of the loads. If wiring the local switches before the Power Pack and Slave Pack, use multiple PP-2's, one for each circuit. This will allow for one circuit to remain powered, keeping the system operational when the other is turned off. When controlling a dimming circuit, PP-2 must be wired before dimmer, or SP-2 may be wired after dimmer. ITERFACIG WIT ELECTROIC COTROL SYSTEMS The Relay Switching System is designed to switch Alternating Currents Only. The relay will not switch DC signal inputs to EMS or Lighting Control Systems. Use model #MP-2, or "-R" for signal relay located in Low Voltage Sensor eads. CATALOG IFORMATIO MODEL# DESCRIPTIO OUTPUT VOLTAGE OUTPUT CURRET PP-2 Power Pack with 2 Amp Relay to 24 VDC 7 to 11 ma PP-2-2P Power Pack with two 2 Amp Relays to 24 VDC to 7 ma SP-2 Slave Pack with 2 Amp Relay /A 4 ma (consumption) **Add suffix -LT for Low Temp/i umidity

FORT GILEUM-SECTIO 1 TYPE MS PP2 PP-2 PP-2-2P SP-2 TYPICAL WIRIG DIAGRAMS - DO OT WIRE OT OTE: The Power Pack must be connected to a single phase ot and eutral System. For 12 VAC, connect the Black wire to ot, White wire to eutral, and Cap off the Orange wire. For 24-7 VAC, connect the Orange to ot, White to eutral, and Cap off the Black wire. ever connect both the Black and Orange wires! Low Voltage wire can be to AWG; shielding is not necessary. Class II terminal Block on PP-2-2P only accepts one conductor per terminal of AWG stranded or smaller. Multiple Sensors Controlling One Circuit Multiple Sensors Controlling Two Circuits BLK WT PP-2 WT BLK / OR SWITC BLK WT PP-2-2P WT BLK / OR SWITC SWITC Multiple Sensors Controlling Three Circuits Multiple Sensors Controlling Four Circuits BLK WT BLK WT Wiring Multiple Power Packs Together BLK WT BLK WT BLK WT PP-2-2P SP-2 PP-2 PP-2 PP-2 SP-2 WT BLK / OR WT BLK / OR WT BLK / OR SWITC SWITC SWITC SWITC SWITC SWITC One Sensor Controlling Two Circuits One Sensor Controlling One Circuit BLK WT BLK WT BLK WT BLK WT PP-2-2P PP-2 PP-2-2P PP-2-2P WT BLK / OR WT BLK / OR WT BLK / OR WT BLK / OR SWITC SWITC SWITC SWITC SWITC SWITC SWITC WARRATY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for a period of sixty months. Sensor Switch, Inc., upon prompt notice of such defect will, at its option, provide a Returned Material Authorization number and repair or replace returned product. Limitations and Exclusions: This Warranty is in full lieu of all other representation and expressed and implied warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances shall Sensor Switch, Inc. be liable for any incidental or consequential property damages or losses. Sensor Switch, Inc. 9 orthrop Rd., Wallingford, CT 6492 () 265-2842 info@sensorswitch.com www.sensorswitch.com revised 9/6/ copyright Sensor Switch, Inc.

FORT GILEUM-SECTIO 2 TYPE OS WSD PDT W WALL SWITC DECORATOR SESOR LIE VOLTAGE PASSIVE DUAL TECOLOGY (PDT) WSD PDT SPECIFICATIOS FEATURES Patented Dual Technology with PIR / Microphonics Detection Self-Contained Relay - o Power Pack eeded Interchangeable ot & Load Wires - Impossible to Wire Backwards o eutral Connection Required Small Motion Detection to 2 ft (6.1 m) Self-Grounding Mounting Strap o Minimum Load Push-Button Programmable w/o Removing the Switch Plate Adjustable Time Delay 3-way & 4-way Switching Green LED Indicator PYSICAL SPECS SIZE 4.2 x 1.8 W x 1.5 D (1.67cm x 4.57cm x 3.81cm) WEIGT 5 oz MOUTIG Single Gang Switch Box MOUTIG EIGT 3-48 in (76.2-1.9 cm) COLORS White, Ivory, Gray, Almond, Black ELECTRICAL SPECS MAXIMUM 8 W @ 12 VAC 12 W @ 7 VAC W @ 347 VAC MIIMUM one MOTOR 1/4 P FREQUECY 5/6 z (timers are 1.2x for 5 z) EVIROMETAL SPECS OPERATIG TEMP º to º F (-1º to 71º C) STORAGE TEMP -º to º F (-26º to 71º C) RELATIVE UMIDITY 2 to 9% non-condensing OTER UL and CUL Listed Title 24 Compliant 5 Year Warranty Made in the U.S.A. The WSD PDT Series is a Wall Switch Decorator style Passive Dual Technology (PDT) occupancy sensor. The combination of Passive Infrared and patented Microphonics detection allows this sensor to literally see & hear occupants. It is ideal for restrooms with stalls, private offices where occupant turns their back to the sensor, or rooms with obstructions. SESOR OPERATIO & MODES Passive Dual Technology (PDT) sensors first see motion using Passive Infrared (PIR) and then engage Microphonics to hear sounds that indicate continued occupancy. This patented technology uses Automatic Gain Control (AGC) to dynamically selfadapt a sensor to its environment by filtering out constant background noise and detecting only noises typical of human activity. When occupancy is detected, OPTIOS VADAL-RESISTAT LES (V) Ideal for high abuse or public areas, where occupants simply come and go Decreases detection range by 5% IIBIT POTOCELL (P) Auto set-point calibration Photocell prevents lights from turning on if adequate daylight is available, but does not turn lights off 347 VAC (347) Allows sensor to be powered from and switch 347 VAC Wall Plate Included COLOR White, Ivory, Gray, Almond, Black Wall Plate Included LOW TEMP/IG UMIDITY (LT) Sensor is corrosion resistant Operates down to -4º F( -2ºC) a self-contained relay switches the connected lighting load on. The sensor is line powered and can switch line voltage (see specifications). A timer, factory set at 1 minutes, keeps the lights on during brief periods of inactivity. This timer is push-button programmable from 3 seconds to 2 minutes, and is reset every time occupancy is re-detected. If needed, a 1 second grace period also allows the lights to be voice reactivated after shutting off. This state-of-the-art design requires no field calibration or sensitivity adjustments. O MODES AUTOMATIC O (default) - Lights come on when occupancy is detected. MAUAL O - Requires the occupant manually turn on lights via the push-button. UCED TUR O - Sensor is initially set to only detect large motions, effectively ignoring PIR signals reflected off of surfaces, while still sensing occupants when they enter the room. Once lights are on, the sensor returns to maximum sensitivity. SWITC MODES PICTIVE OFF MODE (default) - This mode allows occupants to turn lights off via the switch without losing the convenience of having the lights automatically turn on when they re-enter the room. Pressing the switch turns the lights off and temporarily disables the occupancy detection in the sensor. After a short exit time delay, the occupancy detection reactivates and monitors for an additional grace period. If no occupancy is detected, the zone will remain in Automatic On operation. If occupancy is detected, the zone will go to a Permanent Off mode, requiring the switch to be pressed again in order to turn the lights on and restore the sensor to Automatic On operation. PERMAET OFF - Pressing the switch turns the lights and the sensor off. Lights will not come on until switch is pressed again. SWITC DISABLE - Prevents user from manually turning off the lights via the push-button. Button can still be utilized for programming. ORDERIG IFO WSD PDT [LES] [POTOCELL] [VOLTAGE] [COLOR] [TEMP/UMIDITY] LES POTOCELL VOLTAGE COLOR TEMP/UMIDITY Blank = one Blank = one Blank = 12/7 VAC W = White Blank = Standard V = Vandal Resistant P = Photocell 347 = 347 VAC IV = Ivory LT = Low Temp GY = Gray AL = Almond BK = Black

COVERAGE PATTER FORT GILEUM-SECTIO 2 TYPE OS WSD PDT W WSD WALL SWITC DECORATOR LES W/ MICROPOICS Small motion (e.g. hand movements) detection up to 2 ft (6.1 m) Large motion (e.g. walking) detection up to 5 ft (.24 m) Wall-to-Wall coverage Microphonics provides overlapping detection of human activity over the complete PIR coverage area Advanced filtering is utilized to prevent non-occupant noises from keeping the lights on Revised 11.11.9 29 Sensor Switch, Inc. 1.2 m 4 ft m 3 6 ft 5 1 2 SIDE VIEW 6 3 m 3 6 2 1 ft 1 2 TOP VIEW WIRIG (DO OT WIRE OT) STADARD WIRIG BLACK* - Line Input BLACK* - Load Output } *BLACK wires can be reversed GREE SCREW - Ground (required connection) 347 VAC OPTIO (347) Black wires are replaced w/ Red wires STADARD COFIGURATIO BI-LEVEL COFIGURATIO ote: Connection to Ground required for sensor to function 3-WAY WIRIG COFIGURATIOS Travelers are used to wire sensors (or sensor and 3-way switch) in parallel. ote: Connection to Ground required for sensor to function WARIG Fire azard Caution: Maximum Lamps Watts, Type 347 VAC. Attention: Risque d incendie : Pauissance Maximales Des Lampes Watts, Type 347 VAC. Warning: The units are intended to be installed by a qualified person with properly rated branch circuit protectors as per applicable local and national regulations (CEC, EC). WARRATY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for a period of 6 months. Sensor Switch, Inc., upon prompt notice of such defect, will, at its option, provide a Returned Material Authorization number and repair or replace returned product. LIMITATIOS AD EXCLUSIOS: This Warranty is in full lieu of all other representation and expressed and implied warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances shall Sensor Switch, Inc. be liable for any incidental or consequential property damages or losses. T65-4-P 9 orthrop Road, Wallingford, CT 6492 1.8.PASSIVE FX.269.96 www.sensorswitch.com

FORT GILEUM-SECTIO 1 TYPE MS CM PDT 9 CM PDT 9 STADARD RAGE º SESOR CEILIG MOUT LOW VOLTAGE DUAL TECOLOGY (PDT) SPECIFICATIOS Features Patented Dual Technology with PIR / Microphonics Detection º Coverage Push-Button Programmable Adjustable Time Delay 1 r Lamp Burn-in Timer Green LED Indicator physical specs SIZE 4.55 Dia. (11.56 cm) 1.55 Deep (3.94 cm) WEIGT 6 oz MOUTIG Ceiling Tile Surface 3.5 Octagon Box Single Gang andy Box COLOR White electrical specs OPERATIG VOLTAGE 12-24 VAC/VDC CURRET DRAW Standard, 4 ma w/ R option, ma DIMMIG Sinks / Sources < 2mA; ~4 Ballasts @.5mA each RECOMMEDED POWER PACK PP2 environmental specs OPERATIG TEMP º to º F (-1º to 71º C) STORAGE TEMP -º to º F (-26º to 71º C) RELATIVE UMIDITY 2 to 9% non-condensing Other UL and CUL Listed Title 24 Compliant 5 Year Warranty Made in the U.S.A. Open area office lighting control is made cost-effective with the use of the CM PDT 9 Series Standard Range occupancy sensor. This small yet powerful sensor provides line-of-sight PIR detection of small motion in a circular pattern, and combines overlapping Microphonics coverage for detection of occupants working in their cubical space. By installing multiple CM PDT 9s on 3 ft (9. m) centers, large control zones are created (typically one per circuit of lighting). The lighting is then controlled in blocks similar to manual switching. Restrooms with stalls, large storage areas with shelving, and libraries with study carrels are also easily and cost- effectively controlled by the CM PDT 9. SESOR OPERATIO The sensor has Passive Dual Technology (PDT), which first sees motion using Passive Infrared (PIR), and then engages Microphonics to hear sounds that indicate continued occupancy. This patented technology uses Automatic Gain Control (AGC) to dynamically self-adapt the sensor to its environment by filtering out constant background noise and detecting only noises typical of human activity. When occupancy is detected, a DC output goes high and can drive up to 2 ma of connected load. The sensor is powered with 12-24 VAC/VDC and typically operates with a PP2 or MP2 power pack, enabling complete 2 Amp circuits to be controlled. An internal timer, factory set at 1 minutes, keeps the lights on during brief periods of inactivity. This timer is push-button programmable from 3 seconds to 2 minutes, and is reset every time occupancy is re-detected. This state-of-the-art sensor requires no field calibration or adjustment. OPTIOS Low Voltage RELAY (R) Enables sensors to interface with other systems (e.g., BMS, lighting panels) Provides dry contact closure via a SPDT, 1 Amp, 4 Volt relay Only one relay needed per zone Changes state when all connected sensors register unoccupied Relay requires sensor power to function Occupancy COTROLled Dimming (D) Provides dimming output to control -1 VDC dimmable ballasts Provides a second occupancy timeout period that enables the lights to go to a dim setting before turning off Adjustable max/min dim setting POTOCELL (P) Auto set-point calibration Two selectable modes of operation On/Off mode: Photocell has full control during periods of occupancy Inhibit mode: Photocell can prevent lights from turning on if adequate daylight is available, but cannot turn lights off POTOCELL w/ DIMMIG (ADC) Photocell within sensor maintains total room light level by controlling levels of -1 VDC dimmable ballasts Photocell also has full on/off control during periods of occupancy Provides a second occupancy timeout period that enables the lights to go to a dim setting before turning off LOW TEMP/IG UMIDITY (LT) Sensor is corrosion resistant to moisture Operates down to -4º F/ 2º C ORDERIG IFO CM PDT 9 [RELAY] [DIMMIG/POTOCELL] [TEMP/UMIDITY] RELAY DIMMIG / Photocell COOSE OE OLY TEMP/umidity Blank = one Blank = one Blank = Standard R = Low Voltage Relay D = Occupancy Controlled Dimming LT = Low Temp P = Photocell ADC = Photocell w/ Dimming