Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips
|
|
- Barbara Horn
- 6 years ago
- Views:
Transcription
1 Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips Part #: HAL-EMG-48-2L-LED-D-V2 Page: 1
2 Made in the USA The Larson Electronics HAL-EMG-48-2L-LED-D-V2 Hazardous Area Dimmable LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4C temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This dimmable C1D2 light fixture is compatible with 0-10V dimmer switches, and contains internal terminal strips for wiring multiple fixtures in series. The HAL-EMG-48-2L-LED-D-V2 fixture is a 4 foot long, 2 lamp, UL listed Class I Division 2 Groups A, B, C and D hazardous area dimmable LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4C temperature rated and comes standard with our high power 28 watt dimmable LED lamps that each produce 2,875 lumens. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. A factory installed terminal strip within the light fixture allows operators to wire multiple fixtures in series, reducing installation cost. The internal terminal strip accounts for dimming control wires (violet/grey) for dimming multiple fixtures in series from a single switch. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This fixture can be configured to run on voltages from V AC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-EMG-48-2L-LED-D-V2 is weatherproof and provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors my occasionally be present. This LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications. This dimmable LED light works operates as a standard light fixture during normal operation while line voltage is present. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will run one bulb at the standard UL suggested 90+ minutes after power is lost. The light recharges the battery once electrical power is restored. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. Emergency mode will operate regardless of if the fixture is turned on or off. A test switch can be installed for routine testing. Page: 2
3 Click Photo to Enlarge Click Photo to Enlarge Surface Mount Pendant Mount Page: 3
4 We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours and helps this LED fixture maintain a T-4C temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T5-bulbs. The 28 watt LED lamps produce more illumination than standard T5 bulbs, but draw only 1/2th of the current. The current generation of Larson Electronics LED T-series style bulbs produce 15% more light than standard T5 bulbs. Standard Surface Mount Brackets: Each L bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. A sliding bracket mount is available so operators can retrofit this LED light fixture to use the per-existing mounting holes from other fluorescent fixtures. Contact us for the sliding bracket option. Suggested Applications:Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since Contact us today at or message sales@larsonelectronics.com for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Superior LED Benefits 1. 50,000 hour lifespan. 2. Can SAVE 50% or more on energy. 1. Each unit dielectrically tested. 3. Qualifies retrofit projects for financial incentives, including utility 2. Fixture arrives assembled and lamped to reduce installation time and rebates, tax credits and energy loan programs. cost. Adjustable mounting brackets enable the operator to choose any 4. Reduces energy use and prolongs life-spans of peripheral cooling mounting angle for the fixture, where other models may only offer one units (A/C, refrigeration) or three choices % recyclable. 3. Fixture constructed of extruded corrosion resistant copper free 6. No toxins-lead, mercury. aluminum alloy. 7. No UV light, infrared radiation or CO2 emissions. 4. Relamping done via 4 turn latches, which enable the operator to 8. Qualifies buildings for LEED and other sustainable business unlatch the hinged door and access the lamps. certifications. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective 9. Bright, even light maintains consistent color over time. finish. Resists dents and corrosion. 10. Instant on/off - No flickering, delays or buzzing. 6. 1/2" or 3/4", threaded access hole for wiring conduit. 11. Very good color rendering. 7. Units can be wired end to end in series. Internal terminal strip allows 12. Vibration/impact resistant. operators to terminate wires within fixtures. 13. Significantly cooler operation. 14. Less frequent outages, higher output improves workplace safety. Page: 4
5 Specifications / Additional Information HAL-EMG-48-2L-LED-D-V2 Hazardous Area Listing: United States - Canada Lamp Type: 0-10V Dimmable LED Dimensions: 51.1"L x 7.06"W x 8.4"H - Surface Mount Weight: 33 Lbs Voltage: V AC, 50/60Hz Ratings Class I Division 2, Groups A, B, C and D UL 595 Outdoor Marine Type (Saltwater) UL 1598A Marine Type Switch Leg for Powering Light On/Off 0-10V Dimmable Dimming: Yes V Dimmable Total Watts: 56 watts Total Lumens: 7,000 Luminous Efficacy: 125 Lm/W LED Lamp Life Expectancy: 50,000 Hours Power Efficiency: 90% Power Factor: >0.95 Color Temp: 4500K or 5600K Beam Angle: 150 Ambient Operating Temp Range:-25 C to +45 C Operating Temp Range: T4C rated Mounting: Bracket Standard, Sliding Bracket Optional Wiring Hub: 1/2" or 3/4" threaded Special Orders- Requirements Contact us for special requirements Battery Backup: 90+ minute runtime Toll Free: Warranty: YES-3 Years* Intl: U.L Approval: U.S Certificate Canada Certificate sales@larsonelectronics.com Scroll Down to Purchase- Part #: HAL-EMG-48-2L-LED-D-V2 (144257) Page: 5
6 Options: HAL-EMG-48-2L-LED-D-V2- MOUNT - COLOR TEMP - HUB SIZE Example: HAL-EMG-48-2L-LED-D-V2-SFC-3000K-0.5IN MOUNT Surface -SFC Pendant -PND COLOR TEMP 3000K -3000K 4500K -4500K 5600K 5600K HUB SIZE 1/2in -0.5IN 3/4in -0.75IN Page: 6
7 Page: 7
8 Page: 8
9 Page: 9
10 Page: 10
11 Links (Click on the below items to view): - SpecSheet Spanish - Dimensional Drawing - Manual - MSDS - Hi-Res Image 1 - Front Image of Fixture with Surface Brackets - Hi-Res Image 2 - Front of Fixture with Lens Open - Hi-Res Image 3 - Side Surface Bracket - Hi-Res Image 4 - Front of Fixture - Hi-Res Image 5 - Side Image of Fixture with Surface Mount Brackets - Hi-Res Image 6 - Close up Image of the Surface Mount Bracket - Hi-Res Image 7 - Close up Image of the Pendant Mount Wiring Hub - Hi-Res Image 8 - Back Image of Fixture for Pendant Mounting Page: 11
Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style V Dimmable
Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style - 0-10V Dimmable Part #: HAL-24-2L-LED-BMSW-D-V2 Page: 1 Made in the USA The Larson Electronics HAL-24-2L-LED-BMSW-D-V2 Hazardous Area
More information48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2
48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2 Part #: HAL-EMG-24-2L-T8-D Page: 1 Made in the USA The Larson Electronics HAL-EMG-24-2L-T8-D Hazardous Area Fluorescent
More informationExplosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4'
Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4' Part #: EPL-EMG-48-2L-T8-D Made in the USA The Larson Electronics EPL-EMG-48-2l-T8-D Explosion Proof Emergency
More informationExplosion Proof LED Light - Equivalent to Watt HID C1D2, UL Listed
Explosion Proof LED Light - Equivalent to 150-175 Watt HID C1D2, UL Listed Part #: EPLC2-LED-175W Page: 1 Made in the USA The Larson Electronics explosion proof LED is designed for use in hazardous work
More information80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup
80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup Part #: HALP-EMG-48-2L-ITG-LED-V2 Page: 1 Made in Texas The Larson Electronics HALP-EMG-48-2L-ITG-LED-V2 Hazardous
More information25W Hazardous Location Integrated LED Light Fixture Lumens - Low Profile - ATEX IEC CSA UL
25W Hazardous Location Integrated LED Light Fixture - 3294 Lumens - Low Profile - ATEX IEC CSA UL Part #: HAL-19-25W-ITG-LED Page: 1 The Larson Electronics HAL-19-25W-ITG-LED 25 Watt Explosion Proof Low
More informationC1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount
C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount Part #: EPL-LED-50W-RT-JB2 Page: 1 The Larson Electronics EPL-LED-50W-RT-JB2 Explosion Proof High Bay light
More informationC2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens
C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens Part #: EPLC2-HB-50LED-RT Page: 1 The Larson Electronics EPLC2-HB-50LED-RT Explosion Proof High Bay light
More information150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam
150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam Part #: EPLC2-HB-155W-LED-PND Page: 1 The Larson Electronics EPLC2-HB-155W-LED-PND Explosion Proof High Bay light
More information26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE
26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE Part #: EPL-LP-12-LED Page: 1 The EPL-LP-12-LED from Larson Electronics is a Low Profile Explosion Proof
More information300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated
300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated Part #: HALD-48-2X150LED-V2-C-OXM Page: 1 Made in Texas The HALD-48-2X150LED-V2-C-OXM from Larson Electronics
More information208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC
208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC Part #: EPL-EMGX-LP-2X48-LED Page: 1 The Larson Electronics EPL-EMGX-LP-2X48-LED Low Profile Explosion Proof
More information4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2
4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2 Part #: HALS-EMG-48-2L-T8 Made in the USA The Larson Electronics HALS-EMG-48-2L-T8 Hazardous Area Fluorescent
More information25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC
25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame - 120-277V AC Part #: EXHL-TRN-LE1-1227 Page: 1 Made in Texas The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion
More informationVaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant Lumens
Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant - 1050 Lumens Part #: VPLED-CRNM-LED10W Page: 1 Made in the USA The VPLED-CRNM-LED10W Vaporproof White LED Light from Larson Electronics
More informationHazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs
Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Part #: HALP-ANC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ANC-48-2L-LED-D-V2
More information100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord
100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord Part #: EPL-PM-100LED-UVA-150-EPP Page: 1 The EPL-PM-100LED-UVA-150-EPP from Larson Electronics is an Explosion
More informationHazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp
Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp Part #: HALS-48-4L-LED Made in Texas The Larson Electronics HAL-48-4L-LED Hazardous Area LED Light Fixture is
More informationDimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency
Dimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency Part #: GAU-48-320W-LED-DIMM Page: 1 The Larson Electronics GAU-48-320W-LED-DIMM Dimmable General Use High
More informationExplosion Proof 70 Watt Low Profile LED Light Fixture Lumens - C1D1 Group B - Hydrogen Rated
Explosion Proof 70 Watt Low Profile LED Light Fixture - 6000 Lumens - C1D1 Group B - Hydrogen Rated Part #: EPL-LP-70W-LED-B The Larson Electronics EPL-LP-70W-LED-B Low Profile LED light fixture provides
More information100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof
100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof Part #: EPLX-HB-100W-RD2-LED-TRC Page: 1 The EPLX-HB-100W-RD2-LED-TRC Explosion Proof Low Bay AC LED light
More information60W Flameproof LED Emergency Linear Fixture V AC - (2) 30W LED Lamps - ATEX/IECEx
60W Flameproof LED Emergency Linear Fixture - 100-250V AC - (2) 30W LED Lamps - ATEX/IECEx Part #: ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V Page: 1 The Larson Electronics ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V
More informationIndustrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved Nanometer
Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved - 365 Nanometer Part #: GAU-HB-100LED-RT-UVA The Larson Electronics GAU-HB-100LED-RT-UVA Industrial Ultraviolet light fixture
More informationLow Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E
Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer - 140 - C1D1 - C2D2 - ISO 14644/FS-209E Part #: HALD-24-1X150LED-V2-140DB Page: 1 Made in the USA The HALD-24-1X150LED-V2-140DB from Larson Electronics
More information50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard
50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard Part #: EPLC2-HHB-GG-150W-LED Page: 1 Made in the USA The Larson Electronics EPLC2-HHB-GG-150W-LED Explosion
More informationExplosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps
Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps Part #: EPL-48-2L-T8-VISUVA Page: 1 The Larson Electronics EPL-48-2L-T8-VISUVA Explosion Proof UV/Visible
More information50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved
50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved Part #: EPLC2-TRN-50LED-RT Page: 1 The Larson Electronics EPLC2-TRN-50LED-RT Explosion Proof compact
More informationExplosion Proof Light - Base Stand Mount - 16 Inch Watt LED - Class I Div 1 C&D
Explosion Proof Light - Base Stand Mount - 16 Inch - 150 Watt LED - Class I Div 1 C&D Part #: EPL-16BS-1X150LED-100 Page: 1 Made in Texas The EPL-16BS-1X150LED-100 Explosion Proof LED Light from Larson
More information40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated
40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated Part #: HALD-24-1X40CPR-LED-V2 Page: 1 The Larson Electronics HALD-24-1X40CPR-LED-V2 Explosion Proof LED Fixture provides
More information100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch
100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch Part #: EPL-BS-2X70LED-100 Page: 1 The EPL-BS-2X70LED-100 Portable Explosion Proof LED Light from Larson
More information150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D
150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D Part #: EPL-24BS-5FT-1X150LED-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-100 Explosion Proof LED
More information150W Explosion Proof LED Flood Light - Surface Mount Lumens - C1D V AC
150W Explosion Proof LED Flood Light - Surface Mount - 17500 Lumens - C1D1-120-277V AC Part #: EPL-LED-150W-RT Page: 1 The EPL-LED-150W-RT from Larson Electronics is an Explosion Proof High Bay LED Light
More informationExplosion Proof LED Light - Equivalent to Watt Metal Halide - Class 1 Division 2
Explosion Proof LED Light - Equivalent to 100-150 Watt Metal Halide - Class 1 Division 2 Part #: EPLC2-LED-150W Page: 1 Made in the USA The EPLC2-LED-150W LED hazardous area light fixture from Larson Electronics
More information120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones
120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones Part #: EPL-TL-2X60.RD2-C-PA-B Made in the USA The EPL-TL-2X60.RD2-C-PA-B Explosion Proof Signal Light
More information56W Vapor Proof LED Fixture V Dimmable - DALI Network lms - IP67 - Outdoor Applications
56W Vapor Proof LED Fixture - 0-10V Dimmable - DALI Network - 7000 lms - IP67 - Outdoor Applications Part #: GVP-ADC-48-2L-LED-D-V2 Page: 1 The Larson Electronics GVP-ADC-48-2L-LED-D-V2 Dimmable LED Light
More information56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network
56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network Part #: HALSS-ADC-48-2L-LED-D-V2 Page: 1 Made in the USA The HALSS-ADC-48-2L-LED-D-V2 Hazardous Location LED Fixture
More information150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D V
150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D - 347-480V Part #: EPL-24BS-5FT-1X150LED-480V-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-480V-100 Explosion
More information120W Hazardous Location LED Fixture V DC - Modbus TCP/IP - Network Controlled - Dimmable
120W Hazardous Location LED Fixture - 12-24V DC - Modbus TCP/IP - Network Controlled - Dimmable Part #: HAL-ANC-60-120W-ITG-LED-DIMM-1224 Page: 1 The Larson Electronics HAL-ANC-60-120W-ITG-LED-DIMM-1224
More informationHazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2
Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Part #: HAL-SL-5-LED Page: 1 Made in Texas The Larson Electronics HAL-SL-5-LED Explosion Proof LED String
More information56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network
56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network Part #: HALP-ADC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ADC-48-2L-LED-D-V2
More informationExplosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1
Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1 Part #: EPL-48-4L-UV Page: 1 Made in the USA The Larson Electronics EPL-48-4L-UV 160 Watt Explosion Proof UV Fluorescent
More informationIndustrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon
Industrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon Part #: WAL-TL-1XCL1B-C-PA-12V Page: 1 Made in the USA The WAL-TL-1XCL1B-C-PA-12V from Larson Electronics
More informationExplosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67
Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67 Part #: EPSLED-80 Page: 1 Made in Texas The EPSLED-80 Explosion Proof LED Strobe Light from Larson Electronics is UL
More informationExplosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up
Explosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up Part #: EPL-EMG-EXT-3W Page: 1 Made in the USA The EPL-EMG-EXT-3W Explosion Proof LED Exit Sign with back
More informationExplosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2
Explosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2 Part #: EPL-SL-5-LED Page: 1 Made in the USA The Larson Electronics EPL-SL-5-LED Explosion Proof String Light set is U.L. approved Class
More information300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug
300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug Part #: EPL-QC-16C-3FT-2X150LED-RT-100-EPP Page: 1 The EPL-QC-16C-3FT-2X150LED-RT-100-EPP Portable Explosion
More information*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts
*RENTAL* Class 1 Division 1 300 Watt Incandescent Light - Explosion Proof - Wall Mount - 120 Volts Part #: RNT-EPL-WM-300W-120V Made in the USA This unit is for rentals. Please scroll down for rental rates
More information7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures V AC 1-Phase - Crane Light
7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures - 120-277V AC 1-Phase - Crane Light Part #: SMLP-16X500LTL-LED-1227 Page: 1 Made in Texas The SMLP-16X500LTL-LED-1227 Cube Mount LED Light Plant
More informationExplosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1
Explosion Proof Light - 400 Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Part #: EPL-HB-400W-MH Made in the USA The EPL-HB-400W-MH metal halide, hazardous area light fixture from Larson Electronics
More informationClass 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors
Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors Part #: HAL-TL-4X10W-C-PA Made in the USA The HAL-TL-4X10W-C-PA Class 1 Division 2 LED Stack Light with Signal
More information5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54
5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54 Part #: LZRWL-CRN-RED Page: 1 Buy American Compliant The LZRWL-CRN-RED Crane Warning Laser is ideal for overhead
More information50mW Red Crane Warning Laser - Red Pedestrian Safety Laser - 120/277V AC - IP54 Rated
50mW Red Crane Warning Laser - Red Pedestrian Safety Laser - 120/277V AC - IP54 Rated Part #: LZRWL-CRN-RED-50MW-1227 Page: 1 Buy American Compliant The LZRWL-CRN-RED-50MW-1227 from Larson Electronics
More information200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 250V DC
200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 250V DC Part #: LZRWL-CRN-RED-200MW-250VDC Page: 1 Buy American Compliant The LZRWL-CRN-RED-200MW-250VDC from
More information200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 120V
200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 120V Part #: LZRWL-CRN-RED-200MW-120V Page: 1 Buy American Compliant The LZRWL-CRN-RED-200MW-120V from Larson
More information160W High Intensity UV LED Light - UVA/365NM V AC - Acrylic Lens
160W High Intensity UV LED Light - UVA/365NM - 120-277V AC - Acrylic Lens Part #: GAU-LTL-UVA-500W-LED Page: 1 The GAU-LTL-UVA-500W-LED UV LED Flood Light offers intense UVA light output for industrial
More informationRed Crane Warning Strobe Laser - 5mW Laser - 1 Flash Per Second - Red Line on Floor - IP54-120/240
Red Crane Warning Strobe Laser - 5mW Laser - 1 Flash Per Second - Red Line on Floor - IP54-120/240 Part #: LZRWL-CRN-STRB-RED-1227 Page: 1 The LZRWL-CRN-STRB-RED-1227 Crane Warning Strobing Laser is ideal
More information33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2
33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2 Part #: HAL-48-33W-LED Buy American Compliant The Larson Electronics HAL-48-33W-LED is a low voltage
More information480W High Intensity LED Light - 60,000 Lumens V AC - High Mast Lighting - Pole Top Mount
480W High Intensity LED Light - 60,000 Lumens - 120-277V AC - High Mast Lighting - Pole Top Mount Part #: GAU-PT-500LTL-LED Page: 1 The GAU-PT-500LTL-LED High Mast LED Flood Light offers intense light
More informationHigh Intensity LED Strobe Light - 10 Watt - 10~30 Volts DC - Permanent Mount - 14 Strobe Patterns
High Intensity LED Strobe Light - 10 Watt - 10~30 Volts DC - Permanent Mount - 14 Strobe Patterns Part #: LEDSL-10W Page: 1 The Larson Electronics LEDSL-10W is a powerful strobing LED beacon that offers
More information500 Watt High Mast (Stadium) LED Light - 60,000 Lumens Outdoor Rated
500 Watt High Mast (Stadium) LED Light - 60,000 Lumens - 120-277 - Outdoor Rated Part #: GAU-LTL-400W-LED Page: 1 The GAU-LTL-400W-LED High Mast (Stadium) LED Flood Light offers intense light output and
More informationExplosion Proof Push Button Momentary Switch - C1D1, C2D1 - Adjustable Timer - 10 sec-170 Minutes
Explosion Proof Push Button Momentary Switch - C1D1, C2D1 - Adjustable Timer - 10 sec-170 Minutes Part #: EPS-PB10-MS-AT-V3 Made in the USA The Larson Electronics EPS-PB10-MS-AT-V2 Explosion Proof Push
More information*RENTAL* Explosion Proof Portacool Portable Evaporative Cooler - C1D1 - Water Mist Cooler - 30" OD
*RENTAL* Explosion Proof Portacool Portable Evaporative Cooler - C1D1 - Water Mist Cooler - 30" OD Part #: RNT-EPF-AC-30 Page: 1 Made in the USA The RNT-EPF-AC-30 Class I Division 1 portable evaporative
More informationC1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof
C1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof Part #: EPSN-HRN-PA-AT-MOD1 Made in the USA The Larson Electronics EPSN-HRN-PA-AT-MOD1 Explosion Proof Horn provides
More informationApplications. Standard Materials
Mercmaster III Low Profile Compact Fluorescent Luminaires Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures
More informationExplosion Proof Ventilation Fan Redirects Stale Air From Hazardous Location Areas
Explosion Proof Ventilation Fan Redirects Stale Air From Hazardous Location Areas Part #: EPF30PND Page: 1 Made in the USA The Larson Electronics EPF30PND Explosion Proof Ventilator Fan / Blower safely
More informationCATALOG NUMBER NAME DESCRIPTION HTL X Keeper 2 40 Watts 120v 5000K 4,000 Lm HTL X Keeper 2 40 Watts 277v 5000K 4,000 Lm 4.
SPECIFICATIONS hazloclinear LIGHTING 120 & 277 Voltage KEY FEATURES Two Models: 120 vac or 277 vac. Die Cast aluminum fixture for LED heat dissipation and thermal control. 40 watts, 4000 lumens, Epistar
More informationGeneral Purpose Ventilation Fan - Venturi-Style Blower PSIG
General Purpose Ventilation Fan - Venturi-Style Blower - 3752 CFM @ 90 PSIG Part #: GPF-3752 Page: 1 Page: 2 Made in the USA The Larson Electronics GPF-3752 General Purpose Ventilation Fan is designed
More informationMAR2 LED SERIES M A R 2 L E D. Linear LED Lighting for Hazardous Locations
MAR2 LED SERIES Linear LED Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 1598A Marine Outside Type UL 8750 LED Safety CSA C22.2 #250.0-08; CSA C22.2
More informationTROFFER RETROFIT KIT (TRK)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TROFFER RETROFIT KIT (TRK) www.trulygreensolutions.com
More informationLED FIXTURE CATALOG. Shining light into the future
LED FIXTURE CATALOG Shining light into the future Company Profile Ohyama Lights, LLC strives to be an innovative company that is responsive to its customers needs. Our mission is to put the customer first
More informationInfrared LED Light - 3 watts - stud mount v - 750nm, 850nm or 940nm
Infrared LED Light - 3 watts - stud mount - 9-42v - 750nm, 850nm or 940nm Part #: LEDLB-1-IR Page: 1 Buy American Compliant The LEDLB-1-IR LED is an ultra compact and powerful medical use suitable infrared
More informationelevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems.
V Series H.I.D s VG, VN, VZ Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7 < VG > < VN > < VZ > Type of Explosion-proof Fixture Wattage Class I Division 2 Group A,B,C,D Class II Division 1,2 Group
More informationEVLPF Series Compact Fluorescent
EVLPF Series Low Profile Hazard Gard Luminaires Cl. I, Div. 1, Groups B (GB Suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (GB Suffix), IIB, IIA Cl. II, Div. 1, Groups E, F, G Class III, Simultaneous Presence
More informationWARRANTY LED ECO PANEL.
LED ECO PANEL www.trulygreensolutions.com 8 MODELS AVAILABLE IN 25W TO 72W EXPECTED LIE OVER 50,000 HRS Compatible Emergency Battery Backup Available eatures 5 YEAR Suitable or Damp Location Use IES ILES
More informationLED Light Emitter - 7, 3-Watt CREE LEDs Lumens Volts
LED Light Emitter - 7, 3-Watt CREE LEDs - 1750 Lumens - 9-32 Volts Part #: LEDLB-21-3C Page: 1 Buy American Compliant The Larson Electronics LEDLB-21-3C LED Light Bar offers high light output in a light
More informationCode Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof
Code Master Factory Sealed Strobe Luminaires Lighting Lighting: Explosionproof Visual Signal Applications Code Master Explosionproof Strobe fixtures are designed to provide safe operation in the presence
More informationLMV Series W Low Profile - Medium Base
L LMV Series 50-150W Low Profile - Medium Base Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G;
More informationEnhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications High-performance, high-brightness Champ VMV LED luminaire brilliantly
More informationLED ECO PANEL.
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. LED ECO PANEL www.trulygreensolutions.com
More informationEVLED201 36W Led Luminaire. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 14.85
80 South Street 7596-726, TX Nacogdoches Phone: 96-569-791 Fax: 96-560-685 EVLED201 6W Led Luminaire Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Long Description
More informationLumination LED Luminaires
GE Lighting Lumination LED Luminaires Recessed LED Luminaire AB Series Dimensional Distinction GE Lumination AB Series LED Recessed Luminaires invigorate drop ceilings with a gently curved lens and stylishly
More informationChamp VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications Now cul Listed! High-performance,high-brightness Champ VMV LED
More informationLED RETROFIT SOLUTIONS
The adoption of LED technology for general illumination systems is considered the attractive choice when compared against traditional linear fluorescent lamps. Engineered Products Company (EPCO) LED RetroFit
More informationSECTION INTERIOR LIGHTING
SECTION 26 51 00 INTERIOR LIGHTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationIR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam Volts DC - 750/850/940Nm
IR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam - 9-42 Volts DC - 750/850/940Nm Part #: LEDLB-4-IR Buy American Compliant The Larson Electronics LEDLB-4-IR LED Light Bar offers high infrared
More informationE10 & L9 Low Wattage Light Cone Data
E10 & L9 Low Light Cone Data 2W-A-SP 2W-A-NFL 2W-A-FL 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL SERIES Toshiba LED Lighting gives you nothing but pure light. At Toshiba, we re illuminating the world by introducing
More informationENERGY EFFICIENT LED SOLUTIONS
DIMMABLE 720 850 SAMSUNG SMD LED LUNA 10W LED DOWNLIGHT Ø 85mm Diameter cut out size: 70mm 1mm Ø 65mm The Luna 10 watt LED down light is a high quality fitting that combines highpowered Samsung SMD technology
More informationThe Commercial LED Lighting Specialist
The Commercial LED Lighting Specialist JANUARY 2016 PRODUCT CATEGORY DATA SHEET Our Service, Our People, Your Choice new LED Panel Lights Manufactured by: LED Panel Lights are versatile and reliable. Incorporating
More informationReflector T2 and GU10 6,000 hours
Reflector T2 and GU1 6, hours 11watt SES E14 Small Screw Cap Equivalent to 6watt R63 information CFL Reflector and GU1 6, hours lamps offer traditional incandescent and halogen shapes and sizes, long life
More informationThe Commercial LED Lighting Specialist
The Commercial LED Lighting Specialist JANUARY 2016 LED GLASS T8 TUBES PRODUCT CATEGORY DATA SHEET Our Service, Our People, Your Choice LED GLASS T8 TUBES LED Glass T8 Tubes Manufactured by: The range
More informationHazardous Area LED Lighting Hazard Gard LED Luminaires. Hazard Gard EVLL LED
Hazardous Area LED Lighting Hazard Gard LED Luminaires Hazard Gard EVLL LED Hazard Gard EVLL LED Safe. Reliable. Efficient. Featuring the industry's broadest range of LED luminaires for harsh and hazardous
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL
SECTION 265100 - INTERIOR LIGHTING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interior lighting fixtures, lamps, and ballasts. 2. Emergency lighting units. 3. Exit signs. 4.
More informationVISAGE ENVIRONMENTAL LIGHTING SOLUTION. INDOOR Lighting SERIES
VISAGE ENVIRONMENTAL LIGHTING SOLUTION INDOOR Lighting SERIES LED Lighting Concept LED, known as Light Emitting Diode, uses solid semiconductor chips as luminescent material. When put the forward voltage
More informationIncentive & Measure Specifications
Incentive & Measure Specifications Commercial Energy Solutions EasySave Program Prescriptive Incentives RETROFIT LIGHTING Incandescent to LED Lighting T12/T8 Fluorescent Tubes to LED Tubes HID to LED Fixtures
More informationProduct Specifications MaxLumen MRI LED Diffused Lighting
NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model MXLumen22-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 2x2 light fixture
More informationLED retrofits! 4 T8 Specification Guide. Retrofit your existing Fluorescent Lights in Seconds No Electrician Needed! Pure Bright
T8 PBT8-DL5004EFX-U AC 100V-277V Day Light 5000K Pure Bright LED retrofits! Retrofit your existing Fluorescent Lights in Seconds No Electrician Needed! With the highest safety rating available, UL Listed,
More informationCL001 >400 Watt lamp basecase, up to 600 Watt replacement fixture $95.00 Fixture
Lighting Specifications Business Please read the details below to ensure you are installing a qualifying product(s). An MID inspection of the pre-existing lighting scheme is required prior to the installation
More informationLED Lighting: Technology Selection and System Commissioning Course Number: CXENERGY1519
AABC Commissioning Group AIA Provider Number: 50111116 LED Lighting: Technology Selection and System Commissioning Course Number: CXENERGY1519 Michael Chow, P.E., CxA, LEED AP BD+C, Metro CD Engineering
More informationHigh bay LED lighting fixture
Supporting bracket EWL - Zone 1, 2, 21, 22 - Replacing traditional discharge lamps of up to 750W - Savings in energy, maintenance and installation costs - Instant, brilliant illumination - Suitable for
More informationTERRALUX RETROFIT LED LIGHTING
TERRALUX RETROFIT LED LIGHTING TERRALUX Founded in Boulder, Colorado, Terralux has been designing and manufacturing energy efficient LED lighting solutions since 2003. Terralux products serve both the
More information