elevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems.
|
|
- Nicholas Greene
- 5 years ago
- Views:
Transcription
1 V Series H.I.D s VG, VN, VZ Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7 < VG > < VN > < VZ > Type of Explosion-proof Fixture Wattage Class I Division 2 Group A,B,C,D Class II Division 1,2 Group E,F,G Class III Division 1 Simultaneous Presence (VN Series) Non Sparking (Ex nr II T4 IP66) Dust Ignition-proof (Ex DP II 11) V Series Wattage Type VG VN VZ HPS 50, 70, , 200,, 400 MH ,, 400 MV ,, 400 Application in hazardous locations requiring elevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems. V Series HID lighting fixtures are used ; in heavy process industries having environments where flammable or explosive vapors or gases, or where combustible dusts are present. in hazardous areas, both indoors and outdoors where long life and low maintenance costs are desired. in petroleum refineries, chemical, petrochemical and other heavy process industry facilities. in paint spray booth suitability provides efficient, economical HID lighting for paint spray areas. where ignitable concentrations of flammable gases, vapors or liquids can exist all of the time or some of the time under normal operation conditions. Features Hinged ballast housing for ease of installation and maintenance Hubs with integral conduit stop and bushing to help prevent damage to field wiring during installation. Factory sealed, porcelain with mogul or medium base socket. Dome and 30 angle reflectors made of FRP material won't rust, corrode, dent, chip or peel. Four mounting arrangements to suit any lighting layout pendant, ceiling, wall bracket and stanchion. Internal ballasts-separate ballasts are not required. High power factor (90%) ballasts reduce power costs allow more fixtures per circuit. Cast aluminium alloy construction and epoxy powder finish provide excellent resistant to corrosion. If you need more data, contact us please.
2 V Series H.I.D s VG Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7 Type of Explosion-proof Non Sparking (Ex nr II T4 IP66) Class I Division 2 Group A,B,C,D Features Compact, lightweight design is ideal for medium and low mounting heights. Cast aluminium alloy construction and epoxy powder finish provide excellent resistant to corrosion. Hubs with integral conduit stop and bushing to help prevent damage to field wiring during installation. Restricted Breathing Construction : zone 2 only Standard Materials Enclosure : Die casting aluminium Globe : Heat resistant hard glass socket : Porcelain with screw shell Reflector : High grade aluminium sheet Guard : Die casting aluminium Compliance & Certification NEC - Class I Division 2 Group A,B,C,D UL s for Use in Hazardous (Classified) Locations UL Listed File No. E IEC , 15 NEMA 3, 3R, 4, 4X, 7 Certified by UL (Underwriters Laboratories Inc.), KOSHA (Korea Occupational Safety & Health Agency), KGS (Korea Gas Safety Corporation), and the others. Options With Dome Reflector or 30 Angle Reflector Instant Restrike (HPS only) Fused to protect ballast and capacitors < VG > Standard Finish MUNSELL No. 7.5BG 6/1.5 If you want another color, contact us please. Technical Data Weight Electrical Rating Mounting Type Catalog No. Weight AC110V/ 220V/ 240V Ceiling VGNL kg Rated Voltage (110V/ 120V/ 208V/ 220V/ 240V/ 277V for UL Listed) Rated Wattage 50W/ 70W/ 100W Rated Frequency 50Hz/ 60Hz Entry Size 1/2", 3/4", 1" If you need more information, contact us please.
3 Ordering Number High Pressure Sodium Metal Halide Mercury Vapor Watt Hub Size Pendant Ceiling Bracket Stanchion Certification 1" VGNL VGNL VGNL VGNL /4" VGNL VGNL VGNL VGNL " VGNL VGNL VGNL VGNL Ex nr II T4 IP66 Class I Division 2 3/4" VGNL VGNL VGNL VGNL Group A,B,C,D 1" VGNL VGNL VGNL VGNL /4" VGNL VGNL VGNL VGNL " VGHL VGHL VGHL VGHL /4" VGHL VGHL VGHL VGHL " VGML VGML VGML VGML /4" VGML VGML VGML VGML Ex nr II T3 IP66 Class I Division 2 Group A,B,C,D Ordering Information VG NL DR Dimension 1 VG 5 Wattage (W) Type NL - High Pressure Sodium HL - Metal Halide ML - Mercury Vapour 3 Mounting Type 6 Entry Size 1 - Pendant 1-1" 2 - Ceiling 3-3/4" 3 - Bracket 5-1/2" 9 - Stanchion 4 Input Voltage (V) Options DR - Dome Type Reflector AR - Angle Type Reflector IR - Instant Restrike FU - Fused Type <Bracket Type> <Stanchion Type> Temperature Performance Data Ambient Class I Non-Sparking Type Watt. Temp ( ) Div. 2 "nr" (T2B) T T4 High (T2B) T4 Pressure T4 Sodium (T2B) T T4 Metal 40 - T3 100 Halide 55 - T3 Mercury Vapor (T2A) T T4 <Ceiling Type> <Pendant Type>
4 Photometric Data Angle cd/1000 lm Angle cd/1000 lm <VGNL DR> : NH100 (9000 lm) +With Guard +Reflector : Aluminium Dome type Reflector Watts Multipliers (For use with candlepower curves only) Conversion Factor Coefficients of Utilization - Zonal Cavity %Effective Ceiling Cavity Reflectance(ρcc) %Wall Reflectance(ρ w) Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance Angle cd/1000 lm Angle cd/1000 lm <VGHL DR> : MH100 (6500 lm) With Guard Reflector : Aluminium Dome type Reflector Coefficients of Utilization - Zonal Cavity %Effective Ceiling Cavity Reflectance(ρcc) %Wall Reflectance(ρ w) Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance
5 V Series H.I.D s VN Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7,9 Type of Explosion-proof Non Sparking (Ex nr II T3 IP66) Dust Ignition-proof (Ex DP II 11) Class I Division 2 Group A,B,C,D Class II Division 1,2 Group E,F,G Class III Division 1 Features Compact, lightweight design is ideal for medium and low mounting heights. Wide range of light sources to meet specific lighting needs - High Pressure Sodium (HPS): 150, 200 and W, Mercury Vapour (MV): 200 and W, Metal Halide (MH): 175 and W. Restricted Breathing Construction : Zone 2 only Standard Materials Enclosure : Die casting aluminium Globe : Heat resistant hard glass socket : Porcelain with screw shell Reflector : Aluminium sheet / Fiberglass-Reinforced Polyester Guard : Stainless steel < VN > Certification Compliance Options UL Listed File No. E Certified by UL (Underwriters Laboratories Inc.), KOSHA (Korea Occupational Safety & Health Agency), KGS (Korea Gas Safety Corporation), and the others. Standard Finish MUNSELL No. 7.5BG 6/1.5 If you want another color, contact us please. NEC - Class I Division 2 Group A,B,C,D, / Class II Division 1,2 Group E,F,G / Class III Division 1 UL s for Use in Hazardous (Classified) Locations IEC , 15 NEMA 3, 3R, 4, 4X, 7, 9 With Dome Reflector or 30 Angle Reflector Instant Restrike (HPS only) Fused to protect ballast and capacitors Quartz Auxiliary Lighting come to full brightness immediately (Non-hazardous location only) Technical Data Electrical Rating AC110V/ 220V/ 240V Rated Voltage (110V/ 120V/ 208V/ 220V/ 240V/ 277V for UL Listed) Rated Wattage 150W/ 175W/ 200W/ W Rated Frequency 50Hz/ 60Hz Entry Size 1/2", 3/4", 1" Weight Mounting Type Catalog No. Weight Pendant VNNL kg Ceiling VNNL kg If you need more information, contact us please.
6 Ordering Number High Pressure Sodium Metal Halide Mercury Vapor Watt Hub Size Pendant Ceiling Bracket Stanchion Certification 1" VNNL VNNL VNNL VNNL /4" VNNL VNNL VNNL VNNL " VNNL VNNL VNNL VNNL /4" VNNL VNNL VNNL VNNL " VNNL VNNL VNNL VNNL /4" VNNL VNNL VNNL VNNL " VNHL VNHL VNHL VNHL /4" VNHL VNHL VNHL VNHL " VNHL VNHL VNHL VNHL /4" VNHL VNHL VNHL VNHL " VNML VNML VNML VNML /4" VNML VNML VNML VNML " VNML VNML VNML VNML /4" VNML VNML VNML VNML Ex nr II T3 IP66 Ex DP II 11 Ex nr II T3 IP66 Ex DP II 12 IP66 Ex nr II T4 IP66 Ex DP II 11 Ordering Information VN NL DR VN 2 Type 3 Mounting Type 4 Input Voltage (V) NL - High Pressure Sodium 1 - Pendant HL - Metal Halide 2 - Ceiling ML - Mercury Vapour 3 - Bracket Stanchion Wattage (W) 6 : Entry Size 7 Options " DR - Dome Type Reflector /4" AR - Angle Type Reflector /2" IR - Instant Restrike Type 25 - FU - Fused Type QAL - Quartz Auxiliary Lighting Type Temperature Performance Data Ambient Class I Class II Non-Sparking Dust Ignition Type Watt. Temp ( ) Div. 2 Div. 1 "nr" Proof "DP" (T2B) 160 (T2C) T T3 - High (T2B) 160 (T2C) T3 11 Pressure T3 - Sodium (T2B) 160 (T2C) T T (T2C) T Metal 55 - T3 - Halide (T2) 160 (T2C) T T (T1) 165 (T2B) T Mercury Vapor (T1) 165 (T2B) T
7 Photometric Data Angle cd/1000 lm Angle cd/1000 lm <VNNL DR> : NH (00 lm) With Guard Reflector : FRP Dome Reflector Multipliers Coefficients of Utilization - Zonal Cavity Watts (For use with candlepower curves only) Conversion Factor %Effective Ceiling Cavity Reflectance(ρcc) %Wall Reflectance(ρ w) Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance Angle cd/1000 lm Angle cd/1000 lm <VNHL DR> : MH (20500 lm) With Guard Reflector : FRP Dome Reflector Multipliers Coefficients of Utilization - Zonal Cavity Watts (For use with candlepower curves only) Conversion Factor %Effective Ceiling Cavity Reflectance(ρcc) %Wall Reflectance(ρ w) Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance
8 Dimension < VN Bracket Type > < VN Stanchion Type > < VN Ceiling Type > < VN Pendant Type >
9 V Series H.I.D s VZ Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7,9 Type of Explosion-proof Non Sparking (Ex nr II T2 IP66) Class I Division 2 Group A,B,C,D Class II Division 1,2 Group E,F,G Class III Division 1 Features Low ambient capability to -40 Wide range of light sources to meet specific lighting needs - High Pressure Sodium (HPS): and 400W, Mercury Vapour (MV): and 400W, Metal Halide (MH): and 400W Restricted Breathing Construction : Zone 2 only Certification UL Listed File No. E Certified by UL (Underwriters Laboratories Inc.), KOSHA (Korea Occupational Safety & Health Agency), KGS (Korea Gas Safety Corporation), and the others. Compliance NEC - Class I Division 2 Group A,B,C,D, / Class II Division 1,2 Group E,F,G / Class III Division 1 UL s for Use in Hazardous (Classified) Locations IEC , 15 NEMA 3, 3R, 4, 4X, 7, 9 < VZ > Standard Materials Enclosure : Die casting aluminium Globe : Heat resistant hard glass socket : Porcelain with screw shell Reflector : Aluminium sheet / Fiberglass-Reinforced Polyester Guard : Stainless steel Options With Dome Reflector or 30 Angle Reflector Fused to protect ballast and capacitors Quartz Auxiliary Lighting come to full brightness immediately (Non-hazardous location only) Standard Finish MUNSELL No. 7.5BG 6/1.5 If you want another color, contact us please. Technical Data Weight Electrical Rating Mounting Type Catalog No. Weight Rated Voltage AC110V/ 220V/ 240V ( See Below) Bracket VZNL kg Rated Wattage W/ 400W Rated Frequency 50Hz/ 60Hz Entry Size 1/2", 3/4", 1" Also you can order various voltage : 120V/ 208V/ 277V/ 460V If you need more information, contact us please.
10 Ordering Number High Pressure Sodium Metal Halide Mercury Vapor Watt Hub Size Pendant Ceiling Bracket Stanchion Certification 1" VZNL VZNL VZNL VZNL /4" VZNL VZNL VZNL VZNL Ex nr II T3 1" VZNL VZNL VZNL VZNL /4" VZNL VZNL VZNL VZNL Ex nr II T2 1" VZHL VZHL VZHL VZHL /4" VZHL VZHL VZHL VZHL Ex nr II T3 1" VZHL VZHL VZHL VZHL /4" VZHL VZHL VZHL VZHL Ex nr II T2 1" VZML VZML VZML VZML /4" VZML VZML VZML VZML Ex nr II T3 1" VZML VZML VZML VZML /4" VZML VZML VZML VZML Ex nr II T2 Ordering Information VZ NL DR VZ 2 Type 3 Mounting Type 4 Input Voltage (V) NL - High Pressure Sodium 1 - Pendant HL - Metal Halide 2 - Ceiling ML - Mercury Vapour 3 - Bracket Stanchion Wattage (W) 6 Entry Size 7 Options " DR - Dome Type Reflector /4" AR - Angle Type Reflector 5-1/2" FU - Fused Type QAL - Quartz Auxiliary Lighting Type Temperature Performance Data Ambient Non Sparking Type Watt. Temp ( ) "nr" 40 T3 High 55 T3 Pressure 40 T2 Sodium T2 40 T3 Metal 55 T3 Halide 40 T T2 40 T3 Mercury 55 T3 Vapor 40 T T2
11 Photometric Data <VZNL DR> + : NH400 (46000 lm) +With Globe and without Guard +Reflector : FRP Dome Reflector Angle cd/1000 lm Angle cd/1000 lm Coefficients of Utilization - Zonal Cavity %Effective Ceiling Cavity Reflectance(ρcc) %Wall Reflectance(ρ w) Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance <VZHL DR> + : MH400 (34000 lm) +With Globe and without Guard +Reflector : FRP Dome Reflector Angle cd/1000 lm Angle cd/1000 lm Coefficients of Utilization - Zonal Cavity %Effective Ceiling Cavity Reflectance(ρcc) %Wall Reflectance(ρ w) Room Cavity Ratio RCR 20% Effective Floor Cavity Reflectance
12 Dimension < VZ Bracket Type > < VZ Ceiling Type > < VZ Stanchion Type > < VZ Pendant Type >
13 V Series H.I.D s Auxiliary Lighting < Auxiliary Lighting > About Auxiliary Lighting Features V Series Auxiliary Lighting Momentary voltage outages or dips can temporarily extinguish HID lamps which may require up to ten minutes to restrike. To provide illumination during this period, 10~20% of the fixtures should be specified with auxiliary lighting. Instant Restart Available for Watt VG Series High Pressure Sodium Fixtures by adding Suffix "IR" to catalog number (Ex: VN NL IR). Additional instant restart interior circuitry may decrease High Pressure Sodium lamp life. Feature will not affect fixture suitability in hazardous location applications Hinged ballast housing for ease of installation and maintenance Hubs with integral conduit stop and bushing to help prevent damage to field wiring during installation. Factory sealed, porcelain with mogul or medium base socket. Four mounting arrangements to suit any lighting layout pendant, ceiling, wall bracket and stanchion. Internal ballasts-separate ballasts are not required. High power factor (90%) ballasts reduce power costs allow more fixtures per circuit. Cast aluminium alloy construction and epoxy powder finish provide excellent resistant to corrosion. Quartz auxiliary is available for all V Series fixtures (except those with plastic refractors) by adding the suffix QAL to the fixture catalog number. (Example : VN NL QAL) Series VG fixtures with this option use 100 or 150 watt quartz lamps. Series VN wattage fixtures can use up to watt quartz lamps. Quartz lamps are not supplied with the fixture Due to the quartz envelope surface temperature (exceeding 6000 C), fixtures with this option are not suitable for Wet hazardous locations. Contact the Factory for specific fixture suitabilities. Incandescent Auxiliary With a surface lamp temperature lower than quartz, incandescent auxiliary lamps are available for Series V fixtures.
LMV Series W Low Profile - Medium Base
L LMV Series 50-150W Low Profile - Medium Base Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G;
More informationDMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl.
More informationApplications. Standard Materials
Mercmaster III Low Profile Compact Fluorescent Luminaires Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures
More informationEVLPF Series Compact Fluorescent
EVLPF Series Low Profile Hazard Gard Luminaires Cl. I, Div. 1, Groups B (GB Suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (GB Suffix), IIB, IIA Cl. II, Div. 1, Groups E, F, G Class III, Simultaneous Presence
More informationN2MVF Series Compact Fluorescent
Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence Marine & Wet Locations, R, 4, 4X; IP56 Applications: Champ Luminaires are used: In areas in which ignitable concentrations
More information50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard
50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard Part #: EPLC2-HHB-GG-150W-LED Page: 1 Made in the USA The Larson Electronics EPLC2-HHB-GG-150W-LED Explosion
More informationExplosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1
Explosion Proof Light - 400 Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Part #: EPL-HB-400W-MH Made in the USA The EPL-HB-400W-MH metal halide, hazardous area light fixture from Larson Electronics
More informationChamp VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications Now cul Listed! High-performance,high-brightness Champ VMV LED
More informationEnhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications High-performance, high-brightness Champ VMV LED luminaire brilliantly
More informationLighting for Hazardous & Severe Environments
Lighting for Hazardous & Severe Environments Petroleum Refining Petrochemical Plants Waste Water Treatment Transportation Facilities Mines and Mining Industrial Manufacturing Rig-A-Lite leads the industry
More informationVAPORGARD Incandescent Luminaires
Cl. I, Div. 2, Groups A, B, C, D (All mounting except stanchion) Wet Locations NEMA 3, 3R L Applications: Vaporgard series incandescent luminaires are used: Indoors or outdoors in industrial locations
More information50-175W VMV Series Champ H.I.D. Luminaires
50-175W VMV Series Restricted Breathing Cl. I, Div 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II Groups E, F, G, Cl. III & Simultaneous Presence (HPS 50W, 70W) Application: VMV
More informationHazardous Area LED Lighting Hazard Gard LED Luminaires. Hazard Gard EVLL LED
Hazardous Area LED Lighting Hazard Gard LED Luminaires Hazard Gard EVLL LED Hazard Gard EVLL LED Safe. Reliable. Efficient. Featuring the industry's broadest range of LED luminaires for harsh and hazardous
More informationChamp-Pak TM Wall Pack & Floodlight Luminaires Hazardous and Non-Hazardous
Champ-Pak TM Wall Pack & Floodlight Luminaires Hazardous and Non-Hazardous 7L Description Page No. Application/Selection 866 Floodlights Luminaires Champ-Pak CPMV 867-873 H.I.D. Voyager nr TM Stainless
More informationTable 500-3(d) Identification Numbers. Maximum Identification
Exit Signs and Emergency Luminaires Hazardous and Non-Hazardous Description Page No. Exit Signs EXL Series 924, 925 EVLPF(B)-EXD 926 DMVF(B)-EXD 927 Light-Pak TM Emergency Lighting Systems ELPS Series
More information*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts
*RENTAL* Class 1 Division 1 300 Watt Incandescent Light - Explosion Proof - Wall Mount - 120 Volts Part #: RNT-EPL-WM-300W-120V Made in the USA This unit is for rentals. Please scroll down for rental rates
More informationExplosion Proof LED Light - Equivalent to Watt Metal Halide - Class 1 Division 2
Explosion Proof LED Light - Equivalent to 100-150 Watt Metal Halide - Class 1 Division 2 Part #: EPLC2-LED-150W Page: 1 Made in the USA The EPLC2-LED-150W LED hazardous area light fixture from Larson Electronics
More informationChamp-Pak Wall Pack Luminares
Champ-Pak Wall Pack Luminares Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups F, G Cl. III & Simultaneous
More informationExplosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67
Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67 Part #: EPSLED-80 Page: 1 Made in Texas The EPSLED-80 Explosion Proof LED Strobe Light from Larson Electronics is UL
More informationUL Listed Available with Cl. I, Div. 2, Groups A, B, C, D rating
CCH UX Series LED Exit Signs UL Listed Available with Cl. I, Div. 2, Groups A, B, C, D rating NEMA 4X, IP66 The Cooper Crouse-Hinds CCH UX Series LED Exit Sign combines the strength and durability of die
More informationExplosion Proof LED Light - Equivalent to Watt HID C1D2, UL Listed
Explosion Proof LED Light - Equivalent to 150-175 Watt HID C1D2, UL Listed Part #: EPLC2-LED-175W Page: 1 Made in the USA The Larson Electronics explosion proof LED is designed for use in hazardous work
More informationCEC: Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X
Applications Enclosed and gasketed lighting fixtures for use in storage areas, tunnels, subways, chemical plants and other areas where moisture, dirt or corrosive atmospheres are a problem. Suitable for
More informationEVLED201 36W Led Luminaire. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 14.85
80 South Street 7596-726, TX Nacogdoches Phone: 96-569-791 Fax: 96-560-685 EVLED201 6W Led Luminaire Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Long Description
More informationHID lighting for hazardous areas Champ HID floodlighting. Champ floodlights. HID floodlighting for hazardous areas
HID lighting for hazardous areas Champ HID floodlighting Champ floodlights HID floodlighting for hazardous areas Champ HID floodlights Safe. Reliable. Efficient. Featuring the industry's broadest range
More informationC1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount
C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount Part #: EPL-LED-50W-RT-JB2 Page: 1 The Larson Electronics EPL-LED-50W-RT-JB2 Explosion Proof High Bay light
More informationEnhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications High-performance, high-brightness Champ VMV LED luminaire brilliantly
More information26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE
26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE Part #: EPL-LP-12-LED Page: 1 The EPL-LP-12-LED from Larson Electronics is a Low Profile Explosion Proof
More information150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam
150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam Part #: EPLC2-HB-155W-LED-PND Page: 1 The Larson Electronics EPLC2-HB-155W-LED-PND Explosion Proof High Bay light
More information4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2
4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2 Part #: HALS-EMG-48-2L-T8 Made in the USA The Larson Electronics HALS-EMG-48-2L-T8 Hazardous Area Fluorescent
More information208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC
208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC Part #: EPL-EMGX-LP-2X48-LED Page: 1 The Larson Electronics EPL-EMGX-LP-2X48-LED Low Profile Explosion Proof
More informationC2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens
C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens Part #: EPLC2-HB-50LED-RT Page: 1 The Larson Electronics EPLC2-HB-50LED-RT Explosion Proof High Bay light
More informationCOMPACT SIZE INTRODUCTION & LOGIC
KILLARK COMPACT SIZE INTRODUCTION & LOGIC Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups llc,llb,lla Class II, Div. 1 & 2, Groups E,F,G Class III Suitable for wet locations Marine Rated (US only)
More informationExplosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips
Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips Part #: HAL-EMG-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HAL-EMG-48-2L-LED-D-V2 Hazardous
More information48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2
48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2 Part #: HAL-EMG-24-2L-T8-D Page: 1 Made in the USA The Larson Electronics HAL-EMG-24-2L-T8-D Hazardous Area Fluorescent
More informationExplosion Proof 70 Watt Low Profile LED Light Fixture Lumens - C1D1 Group B - Hydrogen Rated
Explosion Proof 70 Watt Low Profile LED Light Fixture - 6000 Lumens - C1D1 Group B - Hydrogen Rated Part #: EPL-LP-70W-LED-B The Larson Electronics EPL-LP-70W-LED-B Low Profile LED light fixture provides
More informationChamp VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications Now cul Listed! High-performance, high-brightness Champ VMV LED
More informationExplosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4'
Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4' Part #: EPL-EMG-48-2L-T8-D Made in the USA The Larson Electronics EPL-EMG-48-2l-T8-D Explosion Proof Emergency
More informationCATALOG NUMBER NAME DESCRIPTION HTL X Keeper 2 40 Watts 120v 5000K 4,000 Lm HTL X Keeper 2 40 Watts 277v 5000K 4,000 Lm 4.
SPECIFICATIONS hazloclinear LIGHTING 120 & 277 Voltage KEY FEATURES Two Models: 120 vac or 277 vac. Die Cast aluminum fixture for LED heat dissipation and thermal control. 40 watts, 4000 lumens, Epistar
More information100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof
100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof Part #: EPLX-HB-100W-RD2-LED-TRC Page: 1 The EPLX-HB-100W-RD2-LED-TRC Explosion Proof Low Bay AC LED light
More informationHazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp
Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp Part #: HALS-48-4L-LED Made in Texas The Larson Electronics HAL-48-4L-LED Hazardous Area LED Light Fixture is
More information40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated
40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated Part #: HALD-24-1X40CPR-LED-V2 Page: 1 The Larson Electronics HALD-24-1X40CPR-LED-V2 Explosion Proof LED Fixture provides
More informationPro Series LED Lighting Champ LED floodlights. Champ Pro Series. LED floodlights for heavy industrial
Pro Series LED Lighting Champ LED floodlights Champ Pro Series LED floodlights for heavy industrial Champ Pro Series Floodlights Safe. Reliable. Efficient. Eaton's Crouse-Hinds offers the broadest portfolio
More informationExplosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps
Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps Part #: EPL-48-2L-T8-VISUVA Page: 1 The Larson Electronics EPL-48-2L-T8-VISUVA Explosion Proof UV/Visible
More information50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved
50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved Part #: EPLC2-TRN-50LED-RT Page: 1 The Larson Electronics EPLC2-TRN-50LED-RT Explosion Proof compact
More informationMAR2 LED SERIES M A R 2 L E D. Linear LED Lighting for Hazardous Locations
MAR2 LED SERIES Linear LED Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 1598A Marine Outside Type UL 8750 LED Safety CSA C22.2 #250.0-08; CSA C22.2
More informationClass 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style V Dimmable
Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style - 0-10V Dimmable Part #: HAL-24-2L-LED-BMSW-D-V2 Page: 1 Made in the USA The Larson Electronics HAL-24-2L-LED-BMSW-D-V2 Hazardous Area
More informationLow Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E
Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer - 140 - C1D1 - C2D2 - ISO 14644/FS-209E Part #: HALD-24-1X150LED-V2-140DB Page: 1 Made in the USA The HALD-24-1X150LED-V2-140DB from Larson Electronics
More informationMN/DOT Specification Sign Lighting Luminaire With 150 or 250 Watt Metal Halide Lamps 11/05/09
1. LISTING REQUIREMENTS MN/DOT Specification Sign Lighting Luminaire With 150 or 250 Watt Metal Halide Lamps 11/05/09 1.1. The Luminaire shall be listed by a National Recognized Testing Laboratory (NRTL)
More informationUTILITY LIGHT INTRODUCTION
KILLARK UTILITY LIGHT INTRODUCTION Class I, Div. 2, Groups A,B,C,D Class l, one 2, Groups llc,llb,lla Class II, Div. 2, Groups F,G Class III Suitable for wet locations Enclosure Type 4 Certified - File
More informationREDUCED PROFILE INTRODUCTION
KILLARK REDUCED PROFILE INTRODUCTION Class I, Div. 2, Groups A,B,C,D Class l, one 2, Groups llc,llb,lla Class II, Div. 1 & 2, Groups E,F,G Class III uitable for wet locations Marine Rated (U only) Type
More information100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord
100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord Part #: EPL-PM-100LED-UVA-150-EPP Page: 1 The EPL-PM-100LED-UVA-150-EPP from Larson Electronics is an Explosion
More information25W Hazardous Location Integrated LED Light Fixture Lumens - Low Profile - ATEX IEC CSA UL
25W Hazardous Location Integrated LED Light Fixture - 3294 Lumens - Low Profile - ATEX IEC CSA UL Part #: HAL-19-25W-ITG-LED Page: 1 The Larson Electronics HAL-19-25W-ITG-LED 25 Watt Explosion Proof Low
More informationARRAN LED LED FLOODLIGHT. Standard Specification. Features
ARRAN LED LED FLOODLIGHT The Arran LED floodlight range is low energy with an instant on output and up to 130,000 maintenance free hours. Specifically designed for applications where moisture, dirt or
More information25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC
25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame - 120-277V AC Part #: EXHL-TRN-LE1-1227 Page: 1 Made in Texas The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion
More information300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated
300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated Part #: HALD-48-2X150LED-V2-C-OXM Page: 1 Made in Texas The HALD-48-2X150LED-V2-C-OXM from Larson Electronics
More informationEngineering Safety & Productivity. Champ FMV LED Series Floodlight Fixtures Leading the way in LED technology for harsh and hazardous area usage
Engineering Safety & Productivity Champ FMV LED Series Floodlight Fixtures Leading the way in LED technology for harsh and hazardous area usage Champ FMV LED Series Floodlight Fixtures High-performance,
More information60W Flameproof LED Emergency Linear Fixture V AC - (2) 30W LED Lamps - ATEX/IECEx
60W Flameproof LED Emergency Linear Fixture - 100-250V AC - (2) 30W LED Lamps - ATEX/IECEx Part #: ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V Page: 1 The Larson Electronics ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V
More informationEngineering Safety & Productivity. Champ FMV LED Series Floodlight Fixtures Leading the way in LED technology for harsh and hazardous area usage
Engineering Safety & Productivity Champ FMV LED Series Floodlight Fixtures Leading the way in LED technology for harsh and hazardous area usage High-performance, high-brightness Champ FMV LED floodlight
More informationHigh Mast Series HMAO HMSC
High Mast Series HMAO HMSC HOLOPHANE HMAO Series High Mast Series HOLOPHANE HIGH MAST LIGHTING SERIES PROVIDES SUPERIOR BENEFITS FOR ILLUMINATING LARGE AREAS. THE OPTIMIZED LIGHT CONTROL PROVIDED BY THE
More informationCode Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof
Code Master Factory Sealed Strobe Luminaires Lighting Lighting: Explosionproof Visual Signal Applications Code Master Explosionproof Strobe fixtures are designed to provide safe operation in the presence
More informationREFRACTOPACK. Corrosion resistant construction allows this luminaire to be installed in corrosive and marine outdoor applications.
REFRACTOPACK The Refractopack luminaire is a versatile unit, combining the options of vertical/horizontal entry, top/side mounting capabilities, and three distinct prismatically controlled light patterns
More informationIndustrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved Nanometer
Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved - 365 Nanometer Part #: GAU-HB-100LED-RT-UVA The Larson Electronics GAU-HB-100LED-RT-UVA Industrial Ultraviolet light fixture
More informationSECTION EXTERIOR LIGHTING
SECTION 26 56 00 PART 1 - GENERAL 1.1 DESCRIPTION This section specifies the furnishing, installation, and connection of exterior luminaries, controls, poles and supports. 1.2 RELATED WORK A. Section 26
More information150W Explosion Proof LED Flood Light - Surface Mount Lumens - C1D V AC
150W Explosion Proof LED Flood Light - Surface Mount - 17500 Lumens - C1D1-120-277V AC Part #: EPL-LED-150W-RT Page: 1 The EPL-LED-150W-RT from Larson Electronics is an Explosion Proof High Bay LED Light
More informationVaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant Lumens
Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant - 1050 Lumens Part #: VPLED-CRNM-LED10W Page: 1 Made in the USA The VPLED-CRNM-LED10W Vaporproof White LED Light from Larson Electronics
More informationRating. Class I Div II
TYPE: LED HAZGLOBE : HZ2 LARGE - 26 WATT SPECIFICATIONS. Housing and Lens Frame: Die cast aluminum for thermal management Lens: Tempered Glass Cage: 0.25 dia Wire; 304 stainless steel Finish: TGIC thermoplastic
More informationMERCMASTER LED SERIES
MERCMASTER LED SERIES System Integrator: Helon Lighting Limited System Integrator: Helon Lighting Limited WHY IS LED THE FUTURE? It s not just about efficiency. LED lighting delivers real productivity
More informationV2LCHF2UNV1 Led Lumnr. Features. Material, Color, and Finish. Long Description. Manufacturer Information EATON CROUSE-HINDS SERIES GTIN
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 VCHF2UNV Led Lumnr Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features amperage
More informationAn Eaton Intelligent Power solution. Champ VMV Connected lighting for hazardous areas
An Eaton Intelligent Power solution Champ VMV Connected lighting for hazardous areas Get connected with Champ VMV. An Eaton Intelligent Power solution: Remote monitoring and control for use in hazardous
More informationExplosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1
Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1 Part #: EPL-48-4L-UV Page: 1 Made in the USA The Larson Electronics EPL-48-4L-UV 160 Watt Explosion Proof UV Fluorescent
More informationHazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs
Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Part #: HALP-ANC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ANC-48-2L-LED-D-V2
More information120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones
120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones Part #: EPL-TL-2X60.RD2-C-PA-B Made in the USA The EPL-TL-2X60.RD2-C-PA-B Explosion Proof Signal Light
More information80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup
80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup Part #: HALP-EMG-48-2L-ITG-LED-V2 Page: 1 Made in Texas The Larson Electronics HALP-EMG-48-2L-ITG-LED-V2 Hazardous
More informationSIMPLIFIED LIGHTING. TRUSTED PROTECTION. CODE MASTER LED LUMINAIRES CLASS I, DIVISION 1
SIMPLIFIED LIGHTING. TRUSTED PROTECTION. CODE MASTER LED LUMINAIRES CLASS I, DIVISION 1 Simplify lighting for harsh and hazardous locations exposed to ignitable vapors and dusts, dirt, moisture and corrosive
More information150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D
150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D Part #: EPL-24BS-5FT-1X150LED-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-100 Explosion Proof LED
More informationE THANOL AND B IODIESEL P LANT L IGHTING S OLUTIONS
E THANOL AND B IODIESEL P LANT L IGHTING S OLUTIONS HOLOPHANE The One Source Solution for Ethanol and Biodiesel Facilities Holophane has been an innovative force in optical technology and lighting product
More informationHazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2
Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Part #: HAL-SL-5-LED Page: 1 Made in Texas The Larson Electronics HAL-SL-5-LED Explosion Proof LED String
More informationExplosion Proof Light - Base Stand Mount - 16 Inch Watt LED - Class I Div 1 C&D
Explosion Proof Light - Base Stand Mount - 16 Inch - 150 Watt LED - Class I Div 1 C&D Part #: EPL-16BS-1X150LED-100 Page: 1 Made in Texas The EPL-16BS-1X150LED-100 Explosion Proof LED Light from Larson
More informationHigh bay LED lighting fixture
Supporting bracket EWL - Zone 1, 2, 21, 22 - Replacing traditional discharge lamps of up to 750W - Savings in energy, maintenance and installation costs - Instant, brilliant illumination - Suitable for
More informationClass 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors
Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors Part #: HAL-TL-4X10W-C-PA Made in the USA The HAL-TL-4X10W-C-PA Class 1 Division 2 LED Stack Light with Signal
More informationInstallation Instructions for 116EXMLED Series AdaptaBeacon LED Lights for Use in Hazardous Locations. Description. Installation WARNING
Installation Instructions for 116EXMLED Series AdaptaBeacon LED Lights for Use in Hazardous Locations STANCHION 116EX-S CEILING 116EX-C 3/ CONDUIT ENTRIES PENDANT 116EX-P 3/ CONDUIT ENTRY 116EX-C (WALL
More informationSECTION INTERIOR LIGHTING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationCirculation Heaters Selection Guidelines
Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation
More informationDescription. Applications
CVEP PDS CVEP Convection for Hazardous Heater For Locations Hazardous Locations Convection Heater 1.8 to 9.0kW (T-2A) 280 C (536 F) 1.6 to 4.0kW (T-3A) 180 C (356 F) 1.8 to 9.0kW (T-2) 1.8 300 C to 9.0kW
More informationBright Ideas. Innovative Solutions. Product Catalog. INDUSTRIAL AND HAZARDOUS Lighting Solutions
Bright Ideas. Innovative Solutions. Product Catalog INDUSTRIAL AND HAZARDOUS Lighting Solutions INDUSTRIAL AND HAZARDOUS Lighting Solutions CATALOG SECTIONS INDUSTRIAL LIGHTING FIXTURE TYPES BOOTH LIGHTING
More informationPetrolux III. PW Series Wet Locations
Petrolux III PW Series Wet Locations HOLOPHANE Wet Location RELIABILITY AND PERFORMANCE ARE KEY CONCERNS IN ALL DEMANDING APPLICATIONS. THE HOLOPHANE WET LOCATION FAMILY OF PRODUCTS IS DESIGNED WITH THE
More informationLED hazardous lighting catalog
LED hazardous lighting catalog Area Linear Emergency Flood 2 Hazlux Lighting US Brochure Hazlux Table of contents Area lighting Linear lighting Emergency lighting Flood lighting 1 2 3 4 US Catalog Hazlux
More informationHazardous area LED lighting Vaporgard LED Luminaires. Vaporgard LED. Low profi le incandescent replacement
Hazardous area LED lighting Vaporgard LED Luminaires Vaporgard LED Low profi le incandescent replacement Vaporgard Series LED Lighting Safe. Reliable. Efficient. Eaton's Crouse-Hinds offers the broadest
More informationEVL-B - Zone 1, 2, 21, 22 - Replaces traditional discharge lamps more than 400W - Saves in energy, maintenance and installation
EVL-B Shock-resistant tempered glass - Zone 1, 2, 21, 22 - Replaces traditional discharge lamps more than 400W - Saves in energy, maintenance and installation costs - Suitable for GAS category IIC LED
More informationEx LED light fittings
About us TEP Ex is a regional leader in manufacturing of explosion-protected electrical equipment. Through continuous development of new products and markets, modernization of technology and investment
More informationCCA-03EX. - Easy installation - Low energy consumption - New COB LED technology - Zone 1, 2, 21, 22. Directional LED spotlights
CCA-03EX - Easy installation - Low energy consumption - New COB LED technology - Zone 1, 2, 21, 22 Directional LED spotlights Body and lid in coated aluminium LED for proper operation monitoring 127 ED.2018
More information150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D V
150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D - 347-480V Part #: EPL-24BS-5FT-1X150LED-480V-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-480V-100 Explosion
More informationPANELBOARD PROTECTION ON A GLOBAL SCALE
PANELBOARD PROTECTION ON A GLOBAL SCALE INTRODUCTION WHY? No matter what environment, location or power requirement, Appleton panelboards have you and your facility covered. From a petrochemical plant
More informationEXH Series Explosionproof Electric Air Heaters
EXH Series Electric Air Heaters Cl. I, Div. & 2, Groups C, D Cl. II, Div., Groups E, F, G NEMA 7CD, 9EFG EXH explosionproof electric heaters are used: In areas made hazardous by the presence of flammable
More informationHOLOPHANE. Vector Luminaire. Optimum visibility. Improved highway safety. Outstanding visibility in critical security applications HL /98
Vector Luminaire Optimum visibility Improved highway safety Outstanding visibility in critical security applications HL-9 /98 Vector Meets AASHTO requirements High vertical illumination Up to : spacing
More informationSafeSite LED Area Light - IECEx / ATEX for Indoor and Outdoor Hazardous Areas. Patent Pending
SafeSite LED Area Light - IECEx / ATEX for Indoor and Outdoor Hazardous Areas About Dialight Dialight (LSE: DIA.L) is leading the energy efficient LED lighting revolution around the world for industrial
More information300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug
300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug Part #: EPL-QC-16C-3FT-2X150LED-RT-100-EPP Page: 1 The EPL-QC-16C-3FT-2X150LED-RT-100-EPP Portable Explosion
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL
SECTION 265100 - INTERIOR LIGHTING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interior lighting fixtures, lamps, and ballasts. 2. Emergency lighting units. 3. Exit signs. 4.
More informationWARNING WARNING. Installation Instructions for 116DEXSTC-FJ AdaptaBeacon Fire Alarm Strobe Lights for Use in Hazardous Locations.
Cheshire, CT 064 3-699-30 (Ph) 3-699-3365 (Cust. Serv. Fax) 3-699-78 (Tech. Serv. Fax) Installation Instructions for 116DEXSTC-FJ AdaptaBeacon Fire Alarm Strobe Lights for Use in Hazardous Locations STANCHION
More informationThe Signal Is Clear TM
P r o t e c t i n g y o u r b u s i n e s s The Signal Is Clear TM Federal Signal Hazardous Area Signaling Audible HORNS Corrosive atmospheres hazardous areas high noise extreme, temperatures dust humidity.
More information