V2LCHF2UNV1 Led Lumnr. Features. Material, Color, and Finish. Long Description. Manufacturer Information EATON CROUSE-HINDS SERIES GTIN

Transcription

1 804 South Street , TX Nacogdoches Phone: Fax: VCHF2UNV Led Lumnr Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features amperage rating 00m-20m A Ballast Type LED Driver Lamp Included Yes Yes/No Lamp Type LED 0 Material ALUMINUM Number of Lamps 4 in Reflector Type None IN Socket Type None IN Voltage Rating 277 VAC Wattage Material, Color, and Finish Color Descriptions Description Long Description Product Type Special Features VCHF2UNV Cooper Crouse-Hinds Led Low Profile Light /4 In Ceiling Multi Tap Cool 9.5 (lbs/each) Led Surface General Purpose Li RED LED LUMNR LED LOW PROFILE LIGHT /4 IN CEILING MULTI TAP COOL Led Low Profile LT /4 In Ceil MT Cool None IN Manufacturer Information Brand EATON CROUSE-HINDS SERIES GTIN Manufacturers Part Number VCHF2/UNV sub brand Vaporgard LED UPC Taxonomies, Classifications, and Categories Category Description LED GENERAL PURPOSE LIGHTING Packaging Carton Weight Per each 9.5

2 804 South Street , TX Nacogdoches Phone: Fax: Uses, Certifications, and Standards Application Frequency Rating Hazardous locations and low mounting heights Hz

3 Vaporgard V Cl. II, Div., Groups F, G The Vaporgard LED family VC cool white color temperature The VC luminaire provides uniform crisp, white light and is suitable for lower mounting heights, confined spaces, tunnels or utility rooms. Using four high power, high brightness LED arrays, this fixture can deliver similar light levels to 50 watt incandescent. VW warm white color temperature The VW luminaire provides similar benefits as the cool white version, but with a color rendering more consistent with a warm incandescent or HPS lamp source. Available with DC power supply For applications with DC power requirements such as solar, battery or UPS. The DC power supply is suitable for 2 VDC through 24 VDC. Model Nominal lumens Watts VC/UNV,6 22 VW/UNV, VC/DC,6 22 VW/DC, Applications: Equivalent incandescent luminaire 50W-200W 85% Oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, platforms, loading docks, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present Locations requiring continuous and consistent light levels in extreme ambient temperatures Where extremely corrosive, wet, dusty, hot and/or cold conditions exist Type 4X, marine, wet locations and hose down environments Confined space or low ceiling areas, such as tunnels, utility rooms, over doorways, entries, landings, etc. Areas requiring frequent on/off of lights Areas where maintenance is difficult or challenging Areas requiring shatter-protected products, such as food processing facilities Outdoor wall or ceiling mounted area illumination Low mounting heights Classified and hazardous locations Certifications and compliances: Typical energy savings / lifetime Class I, Division 2, Groups A, B, C, D Class II, Division, Groups F, G UL844; UL598; UL598A CSA C22.2 No. 7 NEMA 4X, IP66 RoHS compliant II G Ex na IIC T4 Gc (T4 at 55 C) II D Ex tc IIIB T69 C Dc IP66 EN :2009; EN :200; EN60079-:2009 DesignLights Consortium Qualified (some models are not DLC qualified)a VC Features: Instant illumination and restrike Cold temperature operation; no warm-up time Multi-die LED arrays improve reliability Lightweight, low profile and cool surface temperatures Driver with internal fusing for branch circuit protection 22 watt LED system can save up to 85% in energy costs 50K hours rated life can provide >0 years of maintenance-free lighting No mercury or hazardous chemicals eliminates disposal concerns Mounts to existing Vaporgard mounting modules Shock- and vibration-resistant Teflon coated lens (suffix S896) option for increased safety in food processing facilities Low starting temperature: -25ºC Operating ambient: -25ºC to 55ºC (high temperature option) 5 year limited warrantyb Standard materials: Body and mounting modules copper-free aluminum with Corrofree epoxy powder coat Lens bezel aluminum with anodized finish Lens heat- and impact-resistant glass Gaskets silicone External hardware stainless steel VW Photometrics: Complete photometrics can be found at photometrics Electrical ratings: VC/UNV VW/UNV VC/DC VW/DC Voltage VAC, VAC, 277 VAC 277 VAC 2-24 VDC 2-24 VDC Input power (watts) Input current 0.2/ /0.0 2./.0 2./.0 Power factor >0.9 >0.9 N/A N/A THD (I) (%) <20% <20% N/A N/A Maintained lumens,6,400,6,400 Color temperature 5600K 000K 5600K 000K Note: 5 year limited warranty. Refer to page 2 of the most current authorized distributor price book for Eaton s Crouse-Hinds Division s standard Terms and Conditions. AApproved models include: VC/UNV. Refer to Qualified Products List under Family Models for full listing details. Not all models are approved for all application categories. BRefer to page 2 of the most current authorized distributor price book for Eaton s Crouse-Hinds Division s standard Terms and Conditions US: CAN: Copyright 207 Eaton

4 Vaporgard V Cl. II, Div., Groups F, G EASY INSTALLATION AND REPLACEMENT Contractor-friendly design is ideal for both retrofit and new construction applications Installed using the same wall and ceiling mounts as incandescent Vaporgard fixtures RUGGED HEAT SINK Heat sink designed to perform in high ambient temperatures up to +55 C and as low as -0 C Thick walled castings make for a tough, rugged housing that keeps the internal driver and LED temperature down LOW PROFILE DESIGN Unique domeless, low profile design for low mounting heights and confined spaces where incandescent and HID based luminaires are too large to fit in the mechanical envelope required MULTIPLE LENS OPTIONS Tempered clear glass lens standard Diffused glass lens and Teflon coated lens options available MODULAR DESIGN Compact and modular design allows for easy component replacement and future upgrades US: CAN: Copyright 207 Eaton 945

5 Vaporgard V Cl. II, Div., Groups F, G LED driver: Constant current regulated power supply VAC, 277 VAC, 50/60 Hz Internal fusing Active power factor correction, >0.9 Low harmonic distortion, <20% Low in-rush current, <20 amps EMC compliant to 47CFR, Part 2, Part VDC option available LED system: Four high brightness LED arrays Cool white (5600K), CRI 65 Warm white (000K), CRI 82 70% lumen maintenance (L70) at 50K hours Array complies with requirements of LM80 Temperature performance data: Model Max. temp. C Temp. ratingc VC/UNV 40 T5 VC/UNV S T4A VC/DC 40 T5 NVC/UNV 40 T4 NVC/UNV S T4 Weights: Mounting style Lbs. Kg. Pendant Ceiling Wall Stanchion Options: Description Suffix Frosted lens...s89 Available with NEC version only Teflon coated lens...s896 Available with NEC version only High temperature option (up to 55 C ambient temperature)...s902 Brazil (CEPEL certification)... BR Available with IEC version only Ordering information NEC/CEC: Mounting style Cool white AC drive CContact your local sales representative for warm white temperature ratings. DFor use in Class I, Division 2 or Class II, Division, Groups F, G. For Class II, you must order complete catalog number (not available for purchase in components). EFor use when wall mount or ceiling mount box is already installed. DC drive Warm white AC drive DC drive /2 pendantd VCA/UNV VCA/DC VWA/UNV VWA/DC /4 pendantd VCA2/UNV VCA2/DC VWA2/UNV VWA2/DC pendantd VCA/UNV VCA/DC VWA/UNV VWA/DC /2 wall with junction box VCHBF/UNV VCHBF/DC VWHBF/UNV VWHBF/DC /4 wall with junction box VCHBF2/UNV VCHBF2/DC VWHBF2/UNV VWHBF2/DC /2 ceiling VCHF/UNV VCHF/DC VWHF/UNV VWHF/DC /4 ceiling VCHF2/UNV VCHF2/DC VWHF2/UNV VWHF2/DC /2 VXT wall VCHT/UNV VCHT/DC VWHT/UNV VWHT/DC /4 VXT wall VCHT2/UNV VCHT2/DC VWHT2/UNV VWHT2/DC /2 VXW walld VCHW/UNV VCHW/DC VWHW/UNV VWHW/DC /4 VXW walld VCHW2/UNV VCHW2/DC VWHW2/UNV VWHW2/DC /4 stanchiond VCHJ4/UNV VCHJ4/DC VWHJ4/UNV VWHJ4/DC Adapter onlye VCHR/UNV VCHR/DC VWHR/UNV VWHR/DC Note: 5 year limited warranty. Refer to page 2 of the most current authorized distributor price book for Eaton s Crouse-Hinds Division s standard Terms and Conditions. Ordering information : Mounting style Cool white AC drive Warm white AC drive /2 Pendant NVCA/UNV NVWA/UNV /4 Pendant NVCA2/UNV NVWA2/UNV Pendant NVCA/UNV NVWA/UNV /2 Wall with junction box NVCHBF/UNV NVWHBF/UNV /4 Wall with junction box NVCHBF2/UNV NVWHBF2/UNV /2 Ceiling NVCHF/UNV NVWHF/UNV /4 Ceiling NVCHF2/UNV NVWHF2/UNV /2 Wall NVCHT/UNV NVWHT/UNV /4 Wall NVCHT2/UNV NVWHT2/UNV /4 Stanchion NVCHJ4/UNV NVWHJ4/UNV US: CAN: Copyright 207 Eaton

6 Vaporgard V Cl. II, Div., Groups F, G Dimensions: Wall /4 [285.] 6 7/8 [75] /4" NPT HUB /2" REDUCER SUPPLIED 5/6 [2.9] 8 /8 [206.7] Stanchion /6 [299.9] Pendant 8 /4 [22.7] Ceiling 8 /4 [22.7] 7/8 [99] 4 /4 [2.] -/4" HUB 45 Ø4 9/6 [Ø6.0] Ø/4 [Ø7.] /4 [5.6] /4 8 /4 [22.7] 5 7/8 [49.] /4 /4 7 /6 [79.7] Ø4 5/6 [25.2] 8 /4 [22.7] 4 /6 [9.8] 7/8 [99.2] 4 /2 [4.7] VLA /2" NPT HUB VLA2 /4" NPT HUB VLA " NPT HUB 2 /8 [5.9] 7/8 [98.5] 2 /8 [5.4] 5 /2 NPT OR /4" NPT HUB 5 /4 [46.2] /4 Family tree: Class I, Div. 2; Class II, Div., Gr. F&G Class I, Div. 2; Class II, Div. 2, Gr. F&G VXW2 VLA VLA2 VLA VXJ4 (45 Angle) VLHR V LED Housing VXF 0 VXFT 0 VXF 20 VXFT20 VXT20 VXF 0 VXFT 0 VXF 20 VXFT20 Complete luminaire consists of LED housing and cover: VLA pendant or a VLHR adapter and VX series mounting module US: CAN: Copyright 207 Eaton 947