*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts

Transcription

1 *RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts Part #: RNT-EPL-WM-300W-120V Made in the USA This unit is for rentals. Please scroll down for rental rates The RNT-EPL-WM-300W-120V incandescent Explosion Proof Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D, paint spray both approved, and produces approximately 4,000 lumens. Water proof and IP67 rated, this 300 watt incandescent equipped light is available in wall, ceiling, and pendant mount options. The powerful and durable RNT-EPL-WM-300W-120V explosion proof light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered in configurations for wall, ceiling and pendant mounting. Page: 1

2 Click Photo to Enlarge This hazardous area light carries a T3C temperature rating and is U.L. approved Class 1, Groups C and D, Class 2, Groups E and F, and Class III, Groups E, F and G. This light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 3/4" hub. Click here to see the Photometric report of the Larson Electronics EPL-WM-300W-120V light fixture. The spring loaded lamp socket is a medium base glazed porcelain design with heavy gauge nickel plated copper components and the socket leads pass through sealing compound that separates the lamp chamber from the wiring compartment. The bulb and socket assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control. Voltages: 120VAC draws 0.04A average. Temp Code: Class 1 T3 (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.) Page: 2

3 Specifications / Additional Information RNT-EPL-WM-300W-120V Lamp Type: incandescent Lamp Dimensions: 7.25"-Wide, 15" Height Lamp Weight: 12 lbs Hub: 3/4" Threaded Lumens: Approximately 4,000 Voltage: 120 Volts 60hz AC, U.L Ratings Class 1, Groups C and D Class II, Groups E and F Class III, Groups E, F and G IP67 (water proof) Suitable for Paint Spray Booths T3C Temperature Rating Lighting Configuration: Steady On Mounting: Wall Mount, Ceiling-Pendant Mount optional Temp Rating: T3C Wiring: 3/4 inch Hub Rental Type: Monthly, Weekly, Daily Special Orders- Requirements Contact us for special requirements Toll Free: Fax: sales@larsonelectronics.com Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) for further information if required. Rental Prices for the RNT-EPL-WM-300W-120V; Monthly...$ USD Weekly...$ USD Scroll Down to Purchase Part #: RNT-EPL-WM-300W-120V (47159) Page: 3

4 Options: RNT-EPL-WM-300W-120V- MOUNTING TYPE - RENTAL TYPE Example: RNT-EPL-WM-300W-120V-WALL-MR MOUNTING TYPE Wall -WALL Ceiling -CM Pendant -PND RENTAL TYPE Monthly -MR Weekly -WR Daily -DR Page: 4

5 Links (Click on the below items to view): - Dimensional Drawing Page: 5