Easy-action Door Closer DORMA TS83

Easy-action Door Closer DORMA TS83

DORMA TS 83 Easy-action Door Closer The multi-function, multi-purpose door closer Outstanding versatility. Quality assured. Tested to EN 1154. Decades of experience have gone into the development of the DORMA TS 83. The result is user comfort coupled with outstanding versatility. It can be adjusted to suit almost all types of door. Additional anti-corrosion protection for exposed or aggressive conditions is available to special order. Applications and fixing... Fixing couldn t be easier and last but not least it s engineered for excellence. Quality-assured manufacture to ISO 9001, EN 29001, BS 5750. Certified and verified by BSI Quality Assurance Reg. No. Q 6423, FM 10756 Plus points...... for the trade 2 Streamlined product range means low inventory costs and reduced stocking requirement. 2 Comprehensive choice of accessories provides practical and effective solutions to meet special applications.... for the specifier/architect 2 Compact closer design and sturdy flat-form arm assembly. 2 Wide range of standard functions supplemented by optional extras. 2 Suitable for fire doors. (CERTIFIRE approved ITT Ref. CF 118)... for the installer 2 Easy to fix. 2 Can be tailored to the requirements of the door by simple adjustment. 2 Just one model for RH (ISO 5) and LH (ISO 6) doors and for standard and frame/lintel fixing and parallel arm. 2 Spring strength range EN 2 6 to suit virtually every application.... for the user 2 Optimum wall and door protection thanks to thinking backcheck. 2 Closing speed virtually unaffected by temperature fluctuations. 2 High mechanical efficiency gives easy-action opening.... on the pull side Door leaf fixing (standard installation) max. 15 222 215.5 45 58 45 15 38 67.5 30 102 193.5 22 50 50... on the push side Door leaf fixing (parallel arm installation) With parallel arm application, the backcheck comes in later at between 85 and 90, depending on the door thickness and projection of the hinge used; the delayed action, on the other hand, releases the door at an earlier point in its closing sweep. Examples Installation for the opposite hand is a mirror image of the above illustrations. approx. 280 45 51 The TS 83 conforms to most recognised international standards and complies with the requirements and/or recommendations of the following: CERTIFIRE approved for fire doors ITT; Ref. CF 118 Closer weight: 3.3 kg 5.5 60 47.5 17 50 50 22 91.5 293 38 45 98 2 TS 83, GB (UK)

Standard functions With thinking backcheck Thanks to an innovative design concept, the resistance developed by this backcheck system is directly proportional to door acceleration as the door is opened beyond approx. 70. It is almost imperceptible when the door is opened slowly. However, if the door is opened roughly, the backcheck responds in equal measure. And if the door should be flung open at speed whether deliberately, thoughtlessly, accidentally or as a result of a gust of wind the backcheck reacts at full strength, protecting the wall and door from damage. If no backcheck function is required, the system can simply be switched off. 3 2 1 Self-adjusting backcheck 2 Fully controlled closing with adjustable speed 3 Adjustable latch range 1 70 And with delayed action The integrated delayed action enables the closing cycle to be retarded within an adjustable range so that disabled persons, mothers with prams and people carrying bulky items are able to pass through the door without difficulty. 1 Adjustable delayed action 2 Fully controlled closing with adjustable speed 2 105 70 2 1 With optional hold-open arm Combining the TS 83 with a hold-open arm enables the door to be held open at an appropriate angle (up to approx. 150 ). The hold-open function of the standard holdopen arm can be switched on and off by the user by simply pressing a pushbutton. 1 Hold-open range 150 1 Hold-open arms are not approved for fire doors. TS 83, GB (UK) 3

DORMA TS 83 Easy-action Door Closer 1 2 3 4 Standard installation Art. No. 8300 Frame installation Art. No. 8300 Parallel arm installation Art. No. 8300 (The above bracket is supplied with every TS 83 standard door closer.) Hold-open arm installation Art. No. 8301 Adjustable for hold-open up to 150. Can be switched off to act as a standard arm. 5 6 7 8 Soffit bracket and arm for standard installation with shaped architrave Art. No. 8382/1 Parallel arm bracket with upstand (*upstand 35 or 60 mm) Art. No. 8382/2 Angle bracket installation Frame installation for outward opening doors with extra deep reveals. Art. No. 8357 Drop plate installation For installation on frame (or door) when direct fixing of closer is not possible. Art. No. 8359 Specification text DORMA TS 83 rack and pinion door closer; nonhanded; hydraulic control from 180 ; adjustable spring strength EN 2 6; separate sweep and latch valve; selfadjusting backcheck and adjustable delayed action. Suitable for standard or frame installation on doors up to 1400 mm wide. Parallel arm installation suitable for doors up to 1200 mm wide. Specify finish: silver, dark bronze, gold lacquer. A range of colours is also available. For architectural electroplated finishes see separate brochure. DORMA Door Controls Ltd. DORMA Trading Park Staffa Road GB-London E10 7QX Tel. 020 8558 8411 Fax 020 8558 6122 E-mail: hardware@dorma-uk.co.uk DORMA Door Controls Ltd. 19, Sandyford Office Park Foxrock IRL-Dublin 18 Tel. 01 295 82 80-82 Fax 01 295 85 84 E-mail: dormadublin@dorma.com DORMA GmbH + Co. KG P.O. Box 40 09 D-58247 Ennepetal Breckerfelder Str. 42-48 D-58256 Ennepetal Germany Tel. +49(0)23 33/7 93-0 Fax +49(0)23 33/79 34 95 www.dorma.com WN 050 595 51532, 08/03, TS 83, GB/UK, X. XX, 08/03 Subject to change without notice

CERTIFICATE OF APPROVAL No CF 118 This is to certify that, in accordance with CERTIFIRE s Rules for Certification The undermentioned products of DORMA UK LIMITED Wilbury Way, Hitchin, Hertfordshire, SG4 0AB Tel: 01462 477600 Fax: 01462 477601 Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions appended hereto: CERTIFIED PRODUCTS Dorma TS 83 Overhead Mounted Door Closer TECHNICAL SCHEDULE TS34 The Contribution of Controlled Door Closing Devices and Accessories to Fire Resisting Doorsets Signed and sealed for and on behalf of CERTIFIRE Sir Ken Knight Issued: 3 rd February 1992 Chairman - Management Council Reissued: 19 th February 2007 Valid to: 18 th February 2012 Page 1 of 4

CERTIFICATE No CF 118 DORMA UK LIMITED DORMA TS83 OVERHEAD MOUNTED DOOR CLOSER 1. Dorma TS 83 is an overhead mounted door closing device with adjustable power and integral backcheck and delayed action functions. 2. This certification is designed to demonstrate compliance of the product or system specifically with Approved Document B (England and Wales), Section D of the Technical Standards (Scotland) and Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account. 3. This approval relates to its use with the following door assemblies:- Latched and unlatched, intumescent sealed door assemblies consisting of timber faced and edged leaves with timber, cellulosic or mineral cores in timber frames having a fire resistance up to 120 minutes (Code ITT). Latched and unlatched, intumescent sealed door assemblies consisting of metallic faced and edged leaves with cellulosic or mineral cores in steel frames having a fire resistance up to 240 minutes (Code IMM). 4. The closers are approved on the basis of: i) Initial type testing to EN1154 and BS EN 1634-1: 2000 iii) An appraisal against TS34 iii) Certification of quality management system to ISO 9001: 2000. iv) Inspection and surveillance of factory production control v) Ongoing audit testing in accordance with EN 1154 requirements 5. This approval is applicable only to the specified closers used with door assemblies of proven fire resistance (as defined in BS EN 1634-1:2000 or BS476: Part 22: 1987) and having power ratings appropriate to the leaf sizes subject to a minimum size 3 (as specified in BS EN 1154). 6. The approval relates to on going production. Product and/or its immediate packaging is identified with the manufacturers name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate. 7. The following tables show acceptable doorsets types and fire resistance periods: Page 2 of 4 Signed Issued: 3 rd February 1992 Reissued: 19 th February 2007 Valid to: 18 th February 2012

CERTIFICATE No CF 118 DORMA UK LIMITED DORMA TS83 OVERHEAD MOUNTED DOOR CLOSER For doorsets to BS 476: Part 22: 1987 For doorsets to EN 1634-1 Fire resistance performance as MM IMM TT ITT ITM ITC FD20 FD30 FD60 FD90 FD120 FD240 Classification to EN13501-2 MM IMM TT ITT ITM ITC E 20 EI 20 E 30 EI 30 E60 EI 60 E 90 EI 90 E 120 EI120 E240 EI240 See CERTIFIRE Technical Schedules for designation of doorset types i.e. IMM etc. Scope of Approval: Doors may not include uninsulated glass above 20% of their total area. The closers may not be fitted to timber doorsets without leaf/frame edge intumescent protection. Page 3 of 4 Signed Issued: 3 rd February 1992 Reissued: 19 th February 2007 Valid to: 18 th February 2012

CERTIFICATE No CF 118 DORMA UK LIMITED DORMA TS83 OVERHEAD MOUNTED DOOR CLOSER Classification code The above approval provides the following classification: TS83 EN7 4 8 7 1 1 4 TS83 EN3-6 TS83 EN2-6 4 8 4 8 6 3 6 3 1 1 4 1 1 4 Further Information Further information regarding the details contained in this data sheet may be obtained from Dorma UK Limited (Tel: 01462 477600). Further information regarding CERTIFIRE certification and other approved products can be obtained from CERTIFIRE (Tel: 01925 646777). Page 4 of 4 Signed Issued: 3 rd February 1992 Reissued: 19 th February 2007 Valid to: 18 th February 2012