Vehicle Heaters Technical Documentation Quick start guide EasyStart Timer DE EN Operating instructions Quick start guide Installation instructions Control unit for Eberspächer parking heaters A WORLD OF COMFORT
2 Vehicle Heaters Technical Documentation Introduction Please note! This quick start guide gives a brief overview of selected user operations and timer functions. However, it cannot replace the detailed operating instructions with its important explanations and safety instructions. The detailed operating instructions are available to view and download from www.eberspaecher.com. Basic button functions button to switch on the heater and to confirm actions. button to switch off the heater, to exit menu items and to end actions. buttons to select menu items and make settings. Longpress the direct way Longpress Longpress for longer than 2 seconds Heating mode is started immediately. for longer than 2 seconds All functions are ended. Bitte beachten! The The ADD-ON UNIT menu item must be activated by the installation workshop. VENTILATION menu item is only displayed if the heater supports this function.
Vehicle Heaters Technical Documentation 3 Using the timer Heating Heat immediately / Longpress button for longer than 2 seconds. Heating On / Shortpress button for less than 2 seconds, confirm the setpoint temperature (of air heaters only) and the operating time by pressing the button or set using the buttons. button to confirm the setting. Heating Off / Longpress for longer than 2 seconds, all active functions are ended. Heating Off / Shortpress The Heat menu item appears in the display. button for less than 2 seconds, the Heating On function is ended. VENTILATION VENTILATION ON symbol in the Menu bar and confirm by pressing the button, confirm the operating time by pressing the button or set using the buttons. button to confirm the setting. Ventilation Off / Longpress for longer than 2 seconds, all active functions are ended.
4 Vehicle Heaters Technical Documentation Using the timer Ventilation Off / Shortpress The Ventilate menu item appears in the display. button for less than 2 seconds, the Ventilation On function is ended. Add-on unit Add-on unit heating On symbol in the Menu bar and confirm by pressing the symbol and confirm by pressing the button, confirm the setpoint temperature (of air heaters only) and the operating time by pressing the button or set using the buttons. button to confirm the setting. Add-on unit heating Off / Longpress for longer than 2 seconds, all active functions are ended. Add-on unit heating Off / Shortpress The Add-On Unit menu item appears in the display. button for less than 2 seconds, the Add-On Unit Heating On function is ended. Add-on unit ventilation On symbol in the Menu bar and confirm by pressing the symbol and confirm by pressing the confirm the operating time by pressing the button or set using the button to confirm the setting. button, buttons.
Vehicle Heaters Technical Documentation 5 Using the timer Add-on unit ventilation Off / Longpress for longer than 2 seconds, all active functions are ended. Add-on unit ventilation Off / Shortpress The Add-On Unit menu item appears in the display. button for less than 2 seconds; the ADD-ON UNIT VENTILATION ON function is ended. Program Program preselection symbol in the Menu bar and confirm by pressing the button, use the buttons to select program memory P1, P2 or P3 and confirm by pressing the Activating the selected program memory On setting and confirm by pressing the Deactivating the selected program memory Off setting and confirm by pressing the Editing selected program memory symbol in the Menu bar and confirm by pressing the Selecting the weekday group / weekday weekday group Mon Fri, Sat Sun, Mon Sun or a weekday Mon, Tue, Wed, Thu, Fri, Sat, Sun and confirm with the
6 Vehicle Heaters Technical Documentation Using the timer Setting the departure time / start time buttons to set the hours and confirm by pressing the buttons to set the minutes and confirm by pressing the Selecting the operating mode symbol or the symbol and confirm with the Set temperature setpoint For air heaters only buttons to set the temperature setpoint and confirm by pressing the Set the heating level Only for water heaters with automatic operating time calculation ECO heating level or the HIGH heating level and confirm by pressing the Setting the operating time buttons to set the operating time and confirm by pressing the
Vehicle Heaters Technical Documentation 7 U si n g t h e t im e r / Serv ice Settings symbol in the Menu bar and confirm by pressing the Setting the time Confirm the symbol with the buttons to set the hours and confirm by pressing the buttons to set the minutes and confirm by pressing the Setting the weekday symbol and confirm by pressing the buttons to set the current weekday and confirm by pressing the Setting the time format symbol and confirm by pressing the time format and confirm by pressing the Hotline If you have any technical questions, a problem with the timer or the heater, dial the following service phone number from within Germany: Hotline: 0800 1234300 Fax hotline: 01805 262624 Outside of Germany, please contact the respective Eberspächer national representative.
Headquarters: Eberspächer Climate Control Systems GmbH & Co. KG Eberspächerstraße 24 73730 Esslingen Hotline: 0800 1234300 Fax hotline: 01805 262624 info@eberspaecher.com www.eberspaecher.com 22 1000 34 15 04 06.2013 Subject to change without notice Eberspächer Climate Control Systems GmbH & Co. KG Printed in Germany