The adoption of LED technology for general illumination systems is considered the attractive choice when compared against traditional linear fluorescent lamps. Engineered Products Company (EPCO) LED RetroFit Conversion Kit Product Solutions provides a wide variety of LED lighting system upgrades to improve the working environment and your energy efficiency needs. Our retrofit kit solutions address various building owner and facility manager s needs. And since no two lighting retrofit solutions are exactly alike, our LED RetroFit Conversion Kits take into account budget, required lumen output, environment, application use, energy saving goals, minimum efficacy requirements for utility rebates, and other parameters to ensure we deliver the optimal LED illumination system solution. EPCO provides turn-key LED retrofit kit illumination system solutions for strip malls, commercial and industrial buildings, factories, warehouses and more. If the average operating time for your existing lighting system is 4 to 12 hours per day, our retrofit conversion kits represent a huge opportunity for potential energy efficiency and energy savings. Other tangible benefits using our LED RetroFit Conversion Kits include: 1-2 year Return on Investment (ROI) for the Building Owner Guaranteed Energy Savings Sustainable LED illumination system Labor Savings 200,000 hours with virtually no maintenance Eliminates labor for fluorescent lamp changes, lamp breakage, or old non-operating ballast Reduces the risks of blown circuits and fluorescent lamp breakage, overheating Lowers the existing electrical load on the lighting circuits Compatible with LED illumination system controls Rebate programs are available from your local electric utility or regional cooperative. Engineered Products Company (EPCO) warranty program includes a minimum of five (5) year warranty on all LED Luminaries. See our Web Site for more specific details. PRODUCT DATA SHEET LED RETROFIT KITS (STRIP LED OR T8 LED TUBES) 4-FT AND 8-FT RETROFIT KIT (T8 LED TUBES) FOR STANDARD ILLUMINATION APPLICATIONS LIGHTING PRODUCTS PROSERIES LED UTILITY LUMINAIRE UPGRADE 5401 SMETANA DRIVE MINNETONKA, MN 55343 P 800.336.1976 F 800.336.2801
LED RETROFIT KITS FOR STRIP-TYPE FIXTURES Engineered Products Company s LED RetroFit Conversion Kits convert older 4-foot and 8-foot T8 or T12 strip-type fixtures into energy efficient LED luminaires. High quality components and attractive design makes the retrofit look like a new LED luminaire at a fraction of the cost. Improves the quality, integrity, and sustainability of your lighting system. A complete, low-cost LED lighting upgrade solution to reduce energy consumption and improve energy management. Delivers high performance lumen output; no need to purchase a new complete LED luminaire. Provides the contractor with ultimate installation flexibility. The retrofit is fast and easy regardless of strip-type fixture brand. BENEFITS ETL Listed to UL Standard 1598C. DLC Listed and approved (standard wattage driver only). The original light fixture housing is reused. This reduces the retrofit time to half compared to the installation of a new fixture. Reduced energy consumption compared to fluorescent lighting systems. High system efficacy. 100% Tested and certified before shipping ensures out of the box performance. Assembled in the United States. Five (5) Year Warranty. 50,000 hours, minimum at L 70. Minimal part numbers because of our unique installation mounting brackets. Other companies require separate part numbers for various strip-type fixture housing widths. FEATURES One-piece construction, compact design, trouble free installation. Integral adjustable installation brackets accommodate 4.25 (107.95mm) or 5.0 (127mm) strip-type fixture housing widths. Multi-Voltage Operation - 120/277V input. Pre-wired at the factory for 0-10V dimming. Available in 4000K and 5000K color temperatures. Color Rendering Index (CRI): 80+ TYPICAL APPLICATIONS: Commercial Facilities Industrial Facilities Storage Rooms Available in two (2) or three (3) T8 fluorescent lamp equivalents for superior lumen output. Kits are available with or without frosted diffuser lens to meet your application needs. Easy one man installation using our time and labor savings RFK Series Installation Tool. LED RETROFIT CONVERSION KIT (STRIP LED OR T8 LED TUBES) Warehouses Retail Stores And more... the cost and half the time Page 2
RETROFITTING WITH THE LED RETROFIT CONVERSION KIT Integral adjustable installation brackets, on each end of the gear tray, accommodate 4.25 (107.95mm) or 5.0 (127mm) strip-type fixture housing widths. Other companies have separate part number for different housing widths. LED RETROFIT SOLUTIONS X RFK Installation Tool BEFORE Remove and recycle the fluorescent lamps, ballast cover, lamp holders and ballast from the strip-type fixture housing. AFTER Install the complete EPCO LED RetroFit Conversion Kit and the Frosted Diffuser to the strip-type fixture housing and you are done! LED DRIVER SPECIFICATIONS Electrical Specifications Standard Wattage* High Wattage Input Voltage 120-277 VAC 120-277 VAC Input Frequency 50-60 Hz 50-60 Hz Power Factor > 0.9 @ Full Load; 120 through 277V > 0.9 @ Full Load; 120 through 277V Inrush Current 20 Amps @ 230 Volts 10.3 Amps @ 120 Volts; 17.5 Amps @ 277 Volts Output Power 40 Watts 55 Watts Total Harmonic Distortion 20% or less 20% or less Protection Overvoltage, Over Current and Short Circuit Overvoltage, Over Current and Short Circuit Dimming Capability 10% of Total Output Power 10% of Total Output Power Environmental Specifications Operating Temperature -4 F (-20 C) to 122 F (50 C) -4 F (-20 C) to 122 F (50 C) Applications Damp and Dry Locations Damp and Dry Locations Certifications Underwriters Laboratories (UL) UL 8750 UL 8750 FCC Part 15 Class B Consumer Limits Class A Non-Consumer Limits * DLC Listed and Approved. Page 3
T8 LED TUBE RETROFIT KITS FOR STRIP-TYPE FIXTURES Engineered Products Company s Retrofit Conversion Kits convert older 4-foot and 8-foot T8 or T12 strip light fixtures into energy efficient T8 LED luminaires. Each kit includes T8 Bi-Pin Lamp Sockets, Retrofit Bracket Socket Plates, and Self-Tapping Screws. Complies with UL Standard 1598B. Pre-wired T8 LED Tube conversion bracket kit. Pre-painted with smooth, glossy, highly reflective white paint. 8-FT 4-LAMP T8 LED TUBE RETROFIT KIT - P/N 14070 BENEFITS FOR THE FACILITY OWNER Simple upgrade to an energy efficient T8 LED Tube Luminaire. The original light fixture housing is reused. This reduces the retrofit time to half the cost and half the time compared to the installation of a new fixture. Energy savings up to 49%; ROI can be as short as 15 months. DISTRIBUTOR BENEFITS EPCO s Retrofit Conversion Kits are assembled in the USA. Complies with the American Recovery and Reinvestment Act (ARRA) Allows Contractors to participate in Government sponsored lighting system retrofit projects. CONTRACTOR BENEFITS Viable retrofit opportunities in commercial, industrial, and institutional buildings that have not converted to energy saving LED luminaires. Labor savings! Low cost, fast and easy installation. Requires minimal rewiring. Minimal recycling on the jobsite. Note: 1. T8 LED Tube Retrofit Kits accommodate fixture housing widths between 4.25 to 5.0. 2. Energy consumption and savings will vary based on the operating hours per day, the number of operating days per year, the energy cost from your local service provider, and T8 LED Tube cost. 3. All 14070 Series Retrofit Conversion Kit part numbers are pre-fitted with non-shunted lamp holders suitable for use with T8 LED Tubes that are classified per UL 1598C. No Power Between Contacts Power Between Contacts 4-FT 2-LAMP T8 LED TUBE RETROFIT KIT - P/N 14076 Note: Depending on your application needs, other 4-Foot and 8-Foot configurations are available. TYPICAL APPLICATIONS: Commercial and industrial facilities Factories Warehouses and storage areas Strip malls and shopping centers Schools and recreation areas Airport, train and bus terminals Fast food restaurants Other applications where retrofitting existing lighting systems will provide improved lumen output and energy savings. Non-Shunted Shunted Page 4
LED RETROFIT KITS FOR VAPOR TIGHT LUMINAIRES The primary benefits of our vapor-tight LED Luminaire RetroFit Conversion Kits provide energy efficiency and significant energy savings that translates into optimized lumen output suitable for operating in indoor, outdoor, and wet location environments. These LED Luminaire RetroFit Kits consume less than half the wattage output of a 4-foot luminaire using two or three 32-watt T8 fluorescent lamps with a minimum life expectancy of 200,000 hours. Retrofit Upgrade Kits are available in 4-foot and 8-foot lengths to update older T5 or T8 fluorescent luminaires. LED RETROFIT SOLUTIONS Note: LED Luminaire Retrofit Kits are not DLC Approved! Industry Standard Illumination Solutions and Warranty EPCO s solid-state LED Luminaires are ETL listed and meet UL 1598 Standards. Economical, long life LED Luminaires are the smart, energy saving solution and the best illumination systems choice available for your application. LED Luminaire Retrofit Kits for Vaport Tight Luminaires feature a single row of LEDs mounted to a raised heat sink for improved thermal dissipation and can easily be field installed by a qualified electrician. These Luminaire Retrofit Kits include: High efficacy, long-life LED circuit board mounted directly to integral heat sink on the gear tray for maximum thermal dissipation. Modular wiring to simplify and expedite supply line connections to the existing lighting system. LED Driver includes: Auto-compensate feature to ensure fail safe operation. Inputs for dimmable lighting control. Frosted Ribbed Acrylic Diffuser mitigates glare and provides color-rendering index of 81 and above. FOR STANDARD ILLUMINATION APPLICATIONS TYPICAL APPLICATIONS: Parking Garages Food Processing Facilities Commercial Kitchens Refrigerators and Freezers Warehouses Industrial Facilities Commercial Buildings Elevator Shafts Outdoor Shopping Centers Storage Buildings Pedestrian and Road Tunnels Car Washes Laundries Locker Rooms Saunas And more... 6 Latches: If the luminaire housing you want to retrofit has six (6) latches (4-Foot) or twelve (12) latches (8-Foot) total, EPCO s LED Luminaire Retrofit Kit will not fit! 8 Latches: Fits all 4-Foot or 8-Foot fluorescent fixtures with 8 or 14 latches. Page 5
PROSERIES LED UTILITY LUMINAIRE UPGRADE The ProSeries LED Utility Luminaire Upgrade is an energy efficient wet-location, sustainable and cost-effective alternative lighting solution for environments where ingress protection from dust and moisture is highly desirable. BENEFITS ETL Listed to UL Standard 1598 (tested). Suitable for use in indoor, outdoor, or wet location applications. Equivalent to 75-Watts of incandescent lumen output that consumes only 15-watts of electricity. Luminaire Efficacy: 79 lm/w Affordable LED illumination that provides dramatically better visibility. Reliable, durable, maintenance free performance. Optimal illumination, significant energy savings and virtually no luminaire maintenance. Eliminates ongoing replacement lamp cost when compared to incandescent, compact fluorescent, or LED lamps. Appropriate for use with all non-metallic wiring systems. Labor Savings! Fast, simple installation reduces labor cost. 5-Year Limited Warranty. FEATURES The 15-Watt LED luminaire produces 1200+ lumens. Dimmable down to 10% of rated output. UV resistant high impact polycarbonate lens protects LEDs and provides even light distribution. The cast-aluminum LED luminaire s Heat Sink is finished in a black E coat material that will not rust or corrode in the harshest environment. Silicone gasket protects against ingress of moisture and dust. Can be used where high-pressure wash down is required. PROSERIES LED UTILITY LUMINAIRE UPGRAIDE TYPICAL APPLICATIONS: Commercial and Industrial Facilities Agricultural Buildings and Animal Confinement Areas Walk-in Refrigerators/ Freezers Tunnels, Corridors, and Walkways Athletic Areas Storage Areas and Buildings RETROFITTING WITH THE LED UTILITY LUMINAIRE UPGRADE Silicone Gasket Junction Box Adapter X AFTER BEFORE Remove globe, luminaire base and gasket from junction box. Attach the Gasket, Adapter and LED Luminaire Upgrade to the existing junction box. E02-150-013 B1 (3/17-SP) 2017 Engineered Products Company. All Rights Reserved. 5401 SMETANA DRIVE MINNETONKA, MN 55343 P 800.336.1976 F 800.336.2801