DOA Workshop - Jakarta Sharing experiences in the field of DOA Wendell Lynch EASA International Cooperation Officer (DOATL)
Contents! Why DOA?! DOA Rulemaking development
General Why DOA? Rela-onship with Cer-fica-on
EASA Organisation Structure
EASA Organisation Structure
EASA Organisation Structure
(EU) Regulations! REGULATION (EC) No 216/ 2008! Article 5 (e)! Organisations responsible for the design and manufacture of products, parts and appliances shall demonstrate their capability and means to discharge the responsibilities EASA Organisa-on Structure associated with their privileges. Unless otherwise accepted these capabilities and means shall be recognised through the issuance of an organisation approval. The privileges granted to the approved organisation and the scope of the approval shall be specified in the terms of approval.
Regulations! REGULATION (EC) No 216/ 2008! Article 20 (b)(i) EASA Organisa-on Structure! 2. With regard to Organisations, the Agency shall: (b) issue and renew certificates of: (i) design organisations
Regulations! REGULATION (EC) No 1702/2003 & further amendments (laying down the implementing rule of the Basic Regulation and its essential requirements)! Annex PART 21 Part 21 is the set of implementing rules associated with the essential requirements. EASA Organisa-on Structure! Relevant section of Part 21:! Subpart J - Design Organisation Approval
Regulations DECISION No. 2003/1/RM & further amendments (Acceptable Means of Compliance (AMC) and Guidance material (GM)) EASA Organisa-on Structure! AMC and GM to Part 21 are associated to PART 21.! Relevant section of AMC and GM to Part 21 :! Subpart J - Design Organisation Approval
DOA Concept ISM DESIGN ASSURANCE SYSTEM DESIGN AIRWORTHINESS INDEPENDENT CHECKING OF COMPLIANCE SUBCONTRACTORS ORGANISATION
Rulemaking development! Introduction of Permit to Fly (PtF) in Part 21! Ongoing/future developments
Ongoing tasks - Overview Task Title Start finish 21.010 Airworthiness Directives 2009/02 2012/01 21.017 21A.91 Classification of Changes 2013/04 2016/01 21.018 Improved GM 21A.101 (CPR) 2010/01 2011/01 21.023(d) Restricted CofA (AMC&GM) 2007/01 2012/01 21.024 (a&c) Subpart J DOA 2005/04 2013/03 21.026 New Category of parts for which Form 1 is not required 2011/01 2013/02
Ongoing tasks Overview (cont.) Task Title Start finish 21.027(b) Repair & design changes to ETSO (AMC&GM) 21.039(a) & (k) 2006/04 2012/01 OSD & SD 2007/03 2011/02 21.041 Part 21 Subpart H review 2010/04 2013/03 21.042 Other party supplier control 2007/04 2010/03 21.046 Replacement parts 2009/04 2012/02 21.047 3D Models 2013/01 2015/01
21.024(a) Subpart J DOA Q Aims to improve coherence of DOA privileges and Agency involvement in certification Q Task has been split into controversial/ noncontroversial elements Q Non-controversial (Cert.prog. & AFM minor revisions) form Opinion 1/2010 Q Controversial part on hold pending output from Agency strategy group
21.042 Other party supplier control (POA) Q Possibility to subcontract part of the supplier control to rely on third party certification schemes Q NPA 2010-01 published 22 January 2010 Q CRD 2010-01 published 18 October 2010 Q Reduced commenting period (1 December)
21.059: Environmental protection classification of changes to type design Q Detailed guidance for GM 21A.91 to add examples of major environmental changes (noise and emissions) Q NPA in internal consultation
MDM.003: Flight Testing MDM" stands for Multi Disciplinary Measure. This acronym is used to identify rulemaking tasks that affect various rules (e.g. Part-21 and Part-M). Q Harmonisation of flight test crew qualifications Q NPA 2008-20 published 29 August 2008 Q Part 21 proposal: Q To require a flight test operations manual as part of DOA & POA Q Test pilot & FTE competence & experience for flight testing
MDM.056: ICA Q Q Q Q Q Q Q Q Aims to address implementation issues that can lead to safety risks Clarify the responsibilities of all parties Define the content of ICA (and what is mandatory and what is not) Defines the level of control required by the design approval holder Define the extent of Agency verification and/or approval of ICA Privilege under DOA to issue/change ICA Link to MRB process When/to whom ICA to be made available 19
MDM.060: New structure for 1702 and SMS embodiment Q Aims to adapt 1702 to the new structure proposed by draft implementing rules for operations and licensing Q Aims to implement SMS considering what is in proposed for Part-OR.GEN
MDM.060: New EASA Rule Structure Authority Requirements GEN AeMC MED ATO Licensing CC OPS 145 etc OrganisaLons Requirements AeMC ATO GEN OPS 145 etc Technical Requirements MED 147 FCL 66 CC OPS 145 etc Part 21 Sec-on B Agency obliga-ons from Sec-on A Part 21 Sec-on A Subpart G (POA) & Subpart J (DOA) Other Part 21
DOA Workshop - Jakarta The end Thank you for your kind attention