IAS Accreditation Number Company Name Address Contact Name Telephone +86 769 86858888 Effective Date of Scope November 2, 2017 Accreditation Standard ISO/IEC 17025:2005 TL-460 PuLongCun 69, Puxinhu Industrial Area Tangxia Town, Dongguan Guangdong 523719 People's Republic of China John Chan, President FIELDS OF TESTING Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) ANSI /IEEE C62.41.2-2002: IEEE Recommended Practice on Characterization of Surges in Low Voltage (1000V and Less) AC Power Circuits ANSI C78.5-2003: Specifications for Performance of Self- Ballasted Compact ANSI C78.20:2003 Electric Lamps A, G, PS and Similar Shapes with E26 Medium Screw Bases ANSI C78.21-2011 Electric Lamps PAR and R Shapes ANSI C78.50-2014 Electric Lamps Assigned LED Lamp Codes ANSI C78.79-2014 Electric Lamps Nomenclature for Envelope Shapes Intended for Use with Electric Lamps ANSI C78.23:1995 (R2003) Incandescent Lamps Miscellaneous Types ANSI/ANSLG C78.357-2010 For Incandescent Lamps: Tungsten Halogen Lamps (non-vehicle) ANSI C78.375-1997: American National Standard for Fluorescent Lamps Guide for Electrical Measurements ANSI C78.376-2001: Specification for the Chromaticity of Fluorescent Lamps ANSI C78.377-2008: Chromaticity of Solid State Lighting Products ANSI C78.377-2011: Specifications for the Chromaticity of Solid State Lighting Products ANSI C78.379-2006: Electric Lamps Classification of the Beam Patterns of Reflector Lamps ANSI C78.387-1987: Metal-Halide Lamps Method of Measuring Characteristics ANSI C78.387-2007 : Metal-Halide Lamps Method of Measuring Characteristics ANSI C78.389-2004: American National Standard for Electric Lamps High-Intensity Discharge (HID) Methods of Measuring Characteristics International Accreditation Service, Inc. 3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A Telephone +1 562-364-8201 IASInfo@iasonline.org www.iasonline.org Page 1 of 13
Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) ANSI C82.2-2002: Fluorescent Lamp Ballasts--Methods of Measurement ANSI C82.6-2005: Ballast For High Intensity Discharge Lamps Methods of Measurement ANSI C82.11-2002: High-Frequency Fluorescent Lamp Ballasts ANSI C82.77-2002: Harmonic Emission Limits Related Power Quality Requirements for Lighting ANSI C82.77-10-2014: Harmonic Emission Limits Related Power Quality Requirements for Lighting ANSI/ANSLG C81.61-2009 Specifications for Bases (Caps) for Electric Lamps ANSI/IEEE C62.41-1991: Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits, Category A, 7 Strikes ANSI/UL 153-2014: Portable Electric Luminaires CIE Pub 13.2-1974: Method of measuring and Specifying Color Rendering of Light Sources CIE 13.3-1995: Method of Measuring and Specifying Color Rendering of Light Sources CIE 15-2004: Colorimetry Standard CIE 84-1989: The Measurement of Luminous Flux CIE 121-1996 (SPI, 2009): The Photometry and Goniophotometry of Luminaires CIE 127-1997: Measurement of LEDs CSA-22.2 No.37-2014:Christmas Tree and Other Decorative Lighting Outfits EPA DLS: Appendix A ENERGY STAR Online CBCP-V1.1: Tool for Calculating Minimum Center Beam Intensity IEC/TR 61341-2010: Method of measurement of center beam intensity and beam angle(s) of reflector lamps IES LM-9-2009: Approved Method for the Electrical and Photometric Measurements of Fluorescent Lamps IES LM-10-2013: Photometric Testing of Outdoor Fluorescent Luminaires IES TM-16-2005: Technical Memorandum on Light Emitting Diode (LED) Sources and Systems IES LM-16-1993: Practical Guide to Colorimetry of Light Sources IES LM-20-2013: Photometric Testing of Reflector-Type Lamps TL-460 Page 2 of 13
Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) IES LM-31-1995: Photometric Testing of RoadwayLuminaires Using Incandescent Filament and HID Lamps IES LM-35-2002: Photometric Testing of Floodlights Using High Intensity Discharge or Incandescent Filament Lamps IES LM-40-2010: Approved Method for Life Performance Testing of Fluorescent Lamps IES LM- 41-2014: Approved Method for Photometric Testing of Indoor Fluorescent Luminaries IES LM-45-2009: Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps IES LM-46-2004: Photometric Testing of Indoor Luminaires Using High Intensity Discharge or Incandescent Filament Lamps IES LM-47-2012: Life Testing of High Intensity Discharge (HID) Lamps IES LM-49-2012: Life Testing of General Lighting Incandescent IES LM-51-2013: Electrical and Photometric Measurements of HID Lamps Fluorescent Lamps IES LM-54-2012: IESNA Guide to Lamp Seasoning IES LM-58-2013: Guide to Spectroradiometric Measurements IES LM-65-2014: Approved Method for Life Testing of Single- Ended Compact Fluorescent Lamps IES LM-66-2014: Electrical and Photometric Measurements of Single-Ended Compact Fluorescent Lamps ASTM G 154-2012: Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials NEMA SSL 7A-2013 Phase Cut Dimming for Solid-State Lighting Basic Compatibility ANSI/ANSLG C78.81-2010 Double-Capped Fluorescent Lamps Dimensional and Electrical Characteristics ANSI C78.901-2014 Single-Based Fluorescent Lamps Dimensional and Electrical Characteristics IES LM-79-2008: Approved Method for Electrical and Photometric Measurements of Solid-State Lighting Products, Sections 9, 10 and 12 IES LM-80-2008: Approved Method for Measuring Lumen Maintenance of LED Light Sources (LED Packages/Modules/Arrays) IES LM-80-2015: Measuring Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules TL-460 Page 3 of 13
Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) IES TM-21-2011: Projecting Long-Term Lumen Maintenance of LED Light Sources IES TM-28-2014: Projecting Long-Term Luminous Flux Maintenance of LED Lamps and Luminaires IES TM-26-2015: Method for Projecting Catastrophic Failure Rate of LED Packages IES LM 82-2012: Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature IES LM-84-2014: Approved Method for Measuring Luminous Flux and Color Maintenance of LED Lamps, IES LM-78-2007: Light Engines, and Luminaires IESNA Approved Method for Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer US EPA DLS: Requirements V1.5 for decorative light strings Appendix A ANSI UL 588-2004: Standard for Seasonal and Holiday Decorative Products ANSI UL1993-2009: Self-Ballasted Lamps and Lamp Adapters US EPA Lamps v1 Requirements V1.1 for Lamps (Light Bulbs), (except Sections 4, 12, and 13) Elevated Temperature Life Test - Requirements Product Specification for Lamps: Elevated Temperature Life Testing Elevated Temperature Light Output Ratio - ENERGY STAR Program Requirements Product Specification for Lamps: Elevated Temperature Light Output Ratio Ambient Temperature Life Test Start Time Test - Requirements Product Specification for Lamps: Start Time Run Up Time Test - Requirements Product Specification for Lamps: Run-up Time CEC-400-2015-038-CMF Appendix JA10 Test Method for Measuring Flicker of Lighting Systems IES LM-85-14 Electrical and Photometric Measurements of High- Power IES LM-86-2015 Measuring Luminous Flux and Color Maintenance of Remote Phosphor Components TL-460 Page 4 of 13
Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) IES LM-45-2015 The Electrical and Photometric Measurement of General Service Incandescent Filament Lamps ANSI/UL 1993-2012 Self-Ballasted Lamps and Lamp Adapters ANSI/UL 8750-2009 Light Emitting Diode (LED) Equipment for Use in Lighting Products ANSI/UL 8750-2015 Light Emitting Diode (LED) Equipment for Use in Lighting Products ENERGY STAR Ambient Temperature Life Test Method(September-2015) ENERGY STAR Elevated Temperature Life Test Method(September-2015) ENERGY STAR Elevated Temperature Light Output Ratio Test Method(September-2015) ENERGY STAR Noise Test Method(September-2015) ENERGY STAR Run-up Time Test Method(September-2015) ENERGY STAR Start Time Test Method(September-2015) ANSI C78.377:2015Specifications for the Chromaticity of Solid State Lighting Products ANSI C78.376-2014 Electric Lamps - Specification for the Chromaticity of Fluorescent Lamps ASA S12.55-2012 /ISO3745:2012Determination of Sound Power Levels of Noise Sources Using Sound Pressure -Precision Methods Anechoic and Hemi-Anechoic Rooms 81 FR 43403 DOE 10 CFR Parts 429 and 430, Docket No.EERE- 2011-BT-TP-0071: Test Procedures for Integrated Light- Emitting Diode Lamps Appendix BB to Subpart B of Part 430 - Uniform Test Method for Measuring the Input Power, Lumen Output, Lamp Efficacy, Correlated Color Temperature (CCT), Color Rendering Index (CRI), Power Factor, Time to Failure, and Standby Mode Power of Integrated Light-Emitting Diode (LED) Lamps 81 FR 59385 DOE 10 CFR Parts 429 and 430, Docket No.EERE- 2015-BT-TP-0014: Test Procedure for Compact Fluorescent Lamps DOE 10 CFR 430 Subpart B Appendix W Uniform Test Method for Measuring the Energy Consumption of Medium Base Compact Fluorescent Lamps TL-460 Page 5 of 13
Requirements for Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content) (continued) DOE 10 CFR 431.324 Uniform Test Method for the Measurement of Energy Efficiency and Standby Mode EnergyConsumption of Metal Halide Lamp Ballasts 81 FR 72493 DOE Parts 429 and 430: Test Procedures for Certain Categories of General Service Lamps DOE 10 CFR Appendix DD to Subpart B of Part 430, Uniform Test Method for Measuring the Energy Consumption and Energy Efficiency of General Service Lamps That Are Not General Service Incandescent Lamps, Compact Fluorescent Lamps, or Integrated LED Lamps DOE 10 CFR Appendix R to Subpart B of Part 430, Uniform Test Method for Measuring Average Lamp Efficacy (LE), Color Rendering Index (CRI), and Correlated Color Temperature (CCT) of Electric Lamps Requirements for Electronics Brazil INMETRO Ordinance No. 20, February 15, 2017 Regulation for luminaires intended for public Computers Requirements V6.1 Product Specification for Computers ENERGY STAR Test Method for Computer (Rev. August-2014) EPRI Generalized Test Protocol for Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies V6.6 (for products that have internal, multi-output, or single output with integral cooling power supplies AS NZS IEC 62301:2014 IEC 62301-2011: Household Electrical Appliances - Measurement of Standby Power and Standard Performance Evaluation Corporation (SPEC) most current Server Efficiency Rating Tool(SERT) Computer (Enterprise) Servers ENERGY STAR Test Method for Computer Servers(Rev. Apr- 2013), ENERGY STAR Test Procedure V2.0 for Determining the Power Use of Computer Servers at Idle and Full Load (Appendix A of specification) EPRI Generalized Test Protocol for Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies Small Network Equipment Requirements V 1.0 for Small Network Equipment ENERGY STAR Test Procedure for Small Network Equipment- 2013 TL-460 Page 6 of 13
Requirements for Electronics (continued) Imaging Equipment Requirements V2.0. Rev. Oct-2014 ENERGY STAR Imaging Equipment Test Method Rev. Oct-2014 AS NZS IEC 62301:2014 IEC 62301-2011: Household Electrical Appliances Measurement of Standby Power EPRI Generalized Test Protocol for Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies Requirements Product Specification for Imaging Equipment Uniform Test Method for Measuring the Energy Consumption of External Power Supplies, Appendix Z to 10 CFR Part 430 Battery Charging Systems ENERGY STAR Test Method, Requirements V2.0 for Battery Charging Systems: ENERGY STAR Test Method for Battery Charging Systems-2013; IEC Standard 61951-1-2011: Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 1: Nickel-cadmium. IEC Standard 61951-2-2011: Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal hydride. IEC Standard 61960-2011: Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications. Telephony ENERGY STAR Test Method dated Nov. 2013 for Telephony, V3.0 Requirements for Telephony (except VoIP) ENERGY STAR Test Method for Telephony Set Top Boxes Requirements V 4.1 for Set-top Boxes Rev. Oct-2014 CEA-2043, Set-top Box (STB) Power Measurement, Rev, June- 2013, subject to the clarifications in Sections 4.2 4.9 Televisions Requirements Product Specification V 7.0 for Televisions Eligibility Criteria 10 CFR 430 Subpart B Appendix H Uniform Test Method for Measuring the Power Consumption of Television Sets 10 CFR 429.25 Subpart B Television Sets 77FR 2864 NOPR Test Procedure for Television Sets ENERGY STAR Test Method for Televisions CEA-2037-A, Determination of Television Set Power Consumption for TVs with Standby-Active, Low Mode CEA Procedure for DAM Testing: For TVs, Rev. 0.3, Sept. 2010 TL-460 Page 7 of 13
Requirements for Appliances PhotobiologicalSafety Testing Safety Testing Displays Requirements Product Specification V 7.0 for Displays Eligibility Criteria ENERGY STAR Test Method for Determining Displays Energy use dated Sep. 2015 Audio/Video Requirements V 3.0 for Audio/Video, Rev. Dec-2014 ENERGY STAR Test Procedure for Audio/Video product dated July 2012 Water Coolers Requirements Product Specification V 2.0 for Water Coolers ENERGY STAR Test Method for Water Coolers dated May. 2013 IEC 62471/EN 62471-2006: Photobiological Safety of Lamps and Lamp Systems IEC 62031:2008+A1:2012+A2:2014 :LED Modules for General Lighting Safety Specifications ANSI/UL 1598-2008: Luminaires ANSI/UL 1598C-2014: Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits ANSI/UL 2108-2004 Standard for Low-Voltage Lighting Systems ANSI/UL 153-2002 Standard for Safety of Portable Electric Luminaires ANSI/UL 1574-2004: Standard for Track Lighting Systems ASTM G154-2012: Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials ANSI/UL153-2014: Portable Luminaires Brazil INMETRO Regulation 389 (2014) - Conformity Evaluation Requirements for Led Lamps with Integrated Control Device Brazil INMETRO Regulation143 (2015)-Amendment 389 IEC 60081-A5:2013 Double-capped fluorescent lamps Performance specifications IEC 60901 (2011) Single-capped Fluorescent Lamps - Performance Specifications EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications IEC/TR 62778:2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications SANS 62560:2013: Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications TL-460 Page 8 of 13
Safety Testing (continued) AS/NZS 62560:2017 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications EN 62031:2008+A1:2013+A2:2015 LED modules for general lighting - Safety specifications EN 60598-1:2015 Luminaires - Part 1: General requirements and tests AS/NZS 60598.1:2013 Luminaires - General requirements and tests (IEC 60598-1, Ed. 7.0 (2008) MOD) AS/NZS 60598.1:2017 Luminaires General requirements and tests (IEC 60598-1, Ed. 8.0 (2014) MOD) AS/NZS 60598.2.1:2014+Amd 1:2016 Luminaires - Particular requirements - Fixed general purpose luminaires AS/NZS 60598.2.2:2016 Luminaires - Particular requirements - Recessed luminaires (IEC 60598-2-2, Ed. 3.0 (2011) MOD) AS/NZS 60598.2.3:2015 Luminaires - Particular requirements - Luminaires for road and street lighting (IEC 60598-2-3, Ed. 3.1 (2011) MOD) IEC 60598-2-4:2017 Luminaires Part 2-4: Particular requirements Portable general purpose luminaires AS/NZS 60598.2.4:2005+Amdt 1:2007 Luminaires - Particular requirements - Portable general purpose luminaires (IEC 60598-2-4, Ed. 2.0 (1997) MOD) AS/NZS 60598.2.5:2002 Luminaires - Particular requirements - Floodlights (IEC 60598.2.5:1998, MOD) AS/NZS 60598.2.22:2005 Luminaires - Particular requirements - Luminaires for emergency lighting (IEC60598-2-22, Ed. 3.1(2002) MOD) IEC 60598-2-24:2013 Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperatures EN 60598-2-24:2013 Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperatures AS/NZS 61347.1:2016 Lamp controlgear - General and safety requirements (IEC 61347-1:2015, MOD) IEC 61347-2-7:2011 Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (selfcontained) TL-460 Page 9 of 13
Safety Testing (continued) EN 61347-2-7:2012 Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (selfcontained) IEC 61374-2-11 ed1.0 (2001-04) Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires EN 61374-2-11:2001 Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires AS/NZS 61374.2.11:2003 Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires IEC 61347-2-13 ed2.1 (2016-07) Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules EN 61347-2-13:2014/A1 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules AS/NZS IEC 61347.2.13:2013 Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13, Ed.1.0 (2006) MOD) SANS 60968:2013: Self-ballasted lamps for general lighting services Safety requirements.as/nzs 60950.1:2015 Information technology equipment - Safety - General requirements (IEC 60950-1, Ed. 2.2 (2013), MOD) EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements AS/NZS 60065:2012+Amdt 1:2015 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065, Ed.7.2 (2011) MOD) Energy Efficiency IEC 62623-2012: Desktop and Notebook Computers Measurement of Energy Consumption IEC 62612-2013+Amd1-2015:Self-ballasted LED lamps for general lighting services with supply voltage >50v Performance requirements IEC 62087-2011 : Methods of measurement for the power consumption of audio, video and related equipment EN/IEC 60969-2001:Self-Ballasted Lamps for General Lighting Services - Performance Requirements SANS 60969-2010: Self-ballasted lamps for general lighting services - Performance requirements TL-460 Page 10 of 13
Energy Efficiency (continued) SANS 62612:2013: Self-ballasted LED Lamps for general lighting services with supply voltages > 50 V - Performance requirements Brazil INMETRO Regulation 389 (2014) - Conformity Evaluation Requirements for Led Lamps with Integrated Control Device AS/NZS 4934.1:2014 Incandescent lamps for general lighting service Part 1: Test methods Energy performance AS/NZS 4934.2-2011 Incandescent lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements International Committee for Display Metrology (ICDM) Information Display Measurements Standard Version 1.03 CEA-2037-A, Determination of Television Set Power Consumption AS/NZS 62087.2.1:2008 Power consumption of audio, video and related equipment. Part 2.1: Minimum energy performance standards (MEPS) requirements for digital television set-top boxes AS/NZS 62087.2.2:2011 Power consumption of audio, video and related equipment - Minimum energy performance standards (MEPS) and energy rating label requirements for television sets AS/NZS 4665.1:2005/Amdt 1:2009 Performance of external power supplies Part 1: Test method and energy performance mark AS/NZS 62087.1:2010 Power consumption of audio, video and related equipment - Methods of measurement AS/NZS 4783.1:2001 Performance of electrical lighting equipment Ballasts for fluorescent lamps - Part 1: Method of measurement to determine energy consumption and performance of ballasts-lamp circuits AS/NZS 4783.2:2002 Performance of electrical lighting equipment Ballasts for fluorescent lamps - Part 2: Energy labeling and minimum energy performance standards requirements AS/NZS 4847.1:2010 Self ballasted lamps for general lighting services Part 1: Test methods Energy performance AS/NZS 4847.2:2010/Amdt 1:2011 Self ballasted lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lamps - Part 1: Test method - Energy performance AS/NZS 4879.2:2010 Performance of transformers and electronic step-down convertors for ELV lamps - Part 2: Minimum Energy Performance Standards (MEPS) requirements TL-460 Page 11 of 13
Environmental Testing 2870, 2015: Energy Efficiency, Functionality and Labeling Requirements for Lighting Products, Part 1 (Compact fluorescent and LED direct and indirect lamps only) IEC 60068-2-1-2007 Environmental testing Part 2-1: Tests Test A: Cold IEC 60068-2-2-2007 Environmental testing Part 2-2: Tests Test B: Dry heat IEC 60068-2-6-2007 Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) IEC 60068-2-14-2009 Environmental testing Part 2-14: Tests Test N: Change of temperature IEC 60068-2-27-2008 Environmental testing Part 2-27: Tests Test Ea and guidance: Shock IEC 60068-2-30-2005 Environmental testing Part 2-30: Tests Test Db: Damp heat, Cyclic (12 h + 12 h cycle) IEC 60068-2-38-2009 Environmental testing Part 2-38: Tests Test Z/AD: Composite temperature/ humidity cyclic test IEC 60068-2-78-2012 Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state IEC 60068-2-42-2003 Environmental testing. Part 2-42: Tests. Test Kc:Sulphur dioxide test for contacts and connections IEC 60068-2-43-2003 Environmental testing. Part 2-43:Tests. Test Kd:Hydrogen sulphide test for contacts and connections IEC 60068-2-46-1982 Basic environmental testing procedures. Part 2-46:Tests. Guidance to test Kd: Hydrogen sulphide test for contacts and connections IEC 60068-2-49-1983 Basic environmental testing procedures. Part 2-49: Tests. Guidance to test Kc:Sulphur dioxide test for contacts and connections IEC 60068-2-52-1996 Environmental testing. Part 2:Tests. Test Kb:Salt mist,cyclic (sodiumchloride solution) IEC 60068-2-60-2015 Environmental testing. Part 2-60:Tests. Test Ke:Flowing mixed gas corrosion test IEC 60068-2-64-2008 Environmental testing. Part 2-64:Tests. Test Fh:Vibration,broadband random and guidance IEC 60571:2012 Railway applications-electronic equipment used on rolling stock. Accredited only for sections 12.2.4, 12.2.5, 12.2.6, 12.2.11, and 12.2.7 TL-460 Page 12 of 13
Environmental Testing (continued) EN 50155:2007(2010)(E) Railway applications-electronic equipment used on rolling stock, Accredited only for sections 12.2.4, 12.2.5, 12.2.6, 12.2.11, and 12.2.7 IEC 60077-1:2017 Railway applications Electric equipment for rolling stock Part 1: General service, Accredited only for section 9.3.8 JEDEC JESD22-A101C-2009 Steady-State Temperature Humidity Bias Life Test JEDEC JESD22-A101D-2015 Steady-State Temperature Humidity Bias Life Test JEDEC JESD22-A104D-2014 Temperature Cycling JEDEC JESD22-A104E-2014 Temperature Cycling JEDEC JESD22-A105C-2004 Power And Temperature Cycling JEDEC JESD22-A108D-2010 Temperature, Bias, and Operating Life JEDEC JESD22-A119A-2015Low Temperature Storage Life JEDEC JESD22-B103B-2002 Vibration, Variable Frequency JEDEC JESD22-A103E-2015 High Temperature Storage Life JEDEC JESD22-B104C-2004 Mechanical Shock JEDEC JESD24-3-1990 Thermal Impedance Measurements for Vertical Power Mosfets (Delta Source-Drain Voltage Method) JEDEC JESD24-4-1990 Thermal Impedance Measurements for Bipolar Transistors (Delta Base-Emitter Voltage Method) JEDEC JESD24-6-1991 Thermal Impedance Measurements for Insulated Gate Bipolar Transistors JEDEC JESD51-51-2012 Implementation of the Electrical Test Method for the Measurement of Real Thermal Resistance and Impedance of Light-Emitting Diodes with Exposed Cooling TL-460 Page 13 of 13