diode led a division of elemental ED YDROUME 24V ED Strip ight SPECIFICATION SEET ACTUA SIZE YDROUME is designed for harsh or wet* environments, and is completely UV, saltwater, and chlorine resistant. Add brilliant lighting virtually anywhere using a lighting solution durable enough to last in extreme environments, yet elegant enough for many other applications. Designed using patented technology, each section is custom cut to your exact specifications in our California Operations Center for a timely delivery and install. *ARNING: NOT FOR USE IN SUBMERSIBE APPICATIONS OR ITIN 5' OF SIMMING POOS. 24VDC ITEM # CCT (KEVIN) CRI UMENS¹ / FT. DI-24V-35-80-** (STD) 3500K 80 75 DI-24V-65-72-** (STD) 6500K 72 82 DI-24V-P27-78-** (PUS) 2700K 78 155 DI-24V-P35-80-** (PUS) 3500K 80 165 DI-24V-P65-72-** (PUS) 6500K 72 144 YDROUME is sold in custom lengths up to 81.5 feet (STD) or 32.6 feet (PUS) in 7.08 inch increments. Footnote 1 see page 2. UV RESISTANT DIMMABE DRY/ET OCATION CUSTOMIZABE SATATER RESISTANT IP65 FEATURES U isted 2108 certification allows for installations indoor, outdoor, and in wet locations (not submerged in water) Safe for saltwater and chlorine treated spray and mist Resistant to direct sunlight and UV radiation QUICK SPECS Voltage attage Max. Run² Dimensions Dimmable Field Cuttable ED Chips Environment 24VDC 1.13/ft. YDROUME 2.04/ft. YDROUME PUS 81.5 ft. YDROUME 32.6 ft. YDROUME PUS 0.47 x 0.22 in. ( x ) (Strip Only), 0.75 x 0.48 in. ( x ) (w/ Endcap) Yes Yes 10/ft. Certification U isted 2108 arranty Item # Project Outdoor / et ocation / IP65 5-Year arranty Visit the product page at www.diodeed.com for installation guides,.ies files, voltage drop charts, and M-79 reports. 2017 Elemental ED, Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: 877.817.6028 Fax: 415.592.1596 www.diodeed.com info@diodeed.com SPEC SEET YDROUME 24V STRIP IGT SS092617-5.1 1 OF 6
SPECIFICATIONS Input: 24VDC Constant Voltage ED Chip Type: CREE 3228 SMD Chip (), CREE 3535 SMD Chip (P) ED Chip Beam Angle: 120 Material: UV/IR protected TPU uminous Efficacy³ (lm/w): 66~103 Mounting (sold separately): Stake Bracket, Mounting Bracket, and Mounting Channel Connections: Push on connector(s) with 6in.~ 24in. 20/2 AG U Cord. Ambient Temp⁴: -4 ~ 122 F (-20 ~ 50 C) Operating Temp⁵: -4 ~ 176 F (-20 ~ 80 C) Flammability⁶: Flame retardant ADDITIONA ACCESSORIES Accessories listed below are fully compatible with our YDROUME product line. Further information on these products and more accessories can be found in our latest catalog or online at www.diodeed.com. YDROUME Mounting Bracket DI--MTBR YDROUME Stake Bracket DI--STBR COMPIANCE & REGUATORY APPROVAS Safety U isted 2108 ow Voltage ighting System / ow Voltage uminaire. U 1598 / CSA 250.0-08, U 8750. U 879 / CAN/CSA-C22.2 no. 207- M89. Certified for United States and Canada. File # E469769. Performance ED chip data measured in accordance to IES M-80-08. Photometric & Colorimetry data measured in accordance to IES M- 79-08, in Elemental ED's Innovation ab. YDROUME Mounting Channel (ength: 39.4in.) DI--MTC COMPATIBE DRIVERS Additional information on compatible Drivers can be found on page 4-5 or on the Diode ED web site at: www.diodeed.com. 1. umen value measured in accordance to IES M-80-08. ED chips have a luminous flux range with a tolerance of +/- 5%. Each test was performed with a 14.16 in. segment of YDROUME (2x 7.08 sections). 2. Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length. 3. Actual efficacy value is dependent to specified ED driver (power supply). An estimated efficacy value can be calculated as follows: umen value divided by average power consumption per foot. 4. Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature may damage ED chips, reduce the total lamp life, lumen output, and/or adversely impact color consistency. 5. Operating temperature is measured according to the minimum and maximum ambient temperature environment. 6. This product has been tested and passed glow-wire flammability tests (GFI index) at 650 C/1200 F, providing an extra level of safety for common areas, hospitality, and areas of high risk fire. SPEC SEET YDROUME 24V STRIP IGT SS092617-5.1 2 OF 6
MECANICA DIAGRAMS UOM: mm [in.] YDROUME / YDROUME PUS YDROUME MOUNTING CANNE ength: 39.4in. 0.3 7.50 0.47 12.1 20/2 AG ire 0.24 6.2 0.07 1.9 0.41 10.3 6in. ~ 24in. 0.64 16.1 YDROUME MOUNTING BRACKET [0.12] 3 1.06 26.92 1.6 40 0.57 14.48 [0.4] 10 [0.22] 5.60 45 [0.08] 2 [0.34] 8.60 [0.48] 12.20 [0.56] 14.20 YDROUME STAKE BRACKET [0.56] 14 Clip Stake [0.63] 16 [5.89] 149.50 0.60 15.24 0.75 19.05 0.48 12.19 SPEC SEET YDROUME 24V STRIP IGT SS092617-5.1 3 OF 6
ED DRIVERS (Required) The following isted ED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications. For additional ED Driver options see Diode ED's product page at: https://www.diodeled.com/products/led-power-supplies.html SITCEX DRIVER + DIMMER SITC SITCEX combines an ED driver and ED dimmer switch into a single integrated unit. Fits into standard switch boxes. Voltage Power DI 24V SE 60 60-60 atts 100-100 atts SKU - ENGT - IDT - EIGT DI-24V-SE-60 1.40 in. 2.10 in. 4.10 in. DI-24V-SE-100 1.40 in. 2.10 in. 4.10 in. Fits in Standard Switch Box Switch Box (Sold Separately) SITCEX Trim Plate (Sold Separately) O-PRO JUNCTION BOX & DRIVER COMBO - 24V CONSTANT VOTAGE ED DRIVER Use Constant Voltage Drivers to power your lighting system. Compatible with Standard 120VAC On/Off Switches, REIGN ow Voltage Dimmers, TOUCDIA Control System, DMX Decoders, and PM Controls. DI 0970 0970-PS - 24V 35 CV-M24V60-277-PS - 24V 60 CV-M24V90-277-PS - 24V 90 0954-P - 24V 96 SKU - ENGT - IDT - EIGT DI-0970-PS 11.25 in. 3.75 in. 1.90 in. DI-CV-M24V60-277-PS 11.25 in. 3.75 in. 1.90 in. DI-CV-M24V90-277-PS 11.25 in. 3.75 in. 1.90 in. DI-0954-P 13.5 in. 4.5 in. 2.37 in. O-PRO JUNCTION BOX & DRIVER COMBO - 24V COMMERCIA GRADE 0-10V ED DIMMABE DRIVER Compatible with 0-10V controls and dimming systems. DI-DM M24V60 0-10V PS M24V60-24V 60 M24V90-24V 90 PS - o-pro Small P - o-pro arge SKU - ENGT - IDT - EIGT DI-DM-M-24V60-0-10V-PS 11.25 in. 3.75 in. 1.90 in. DI-DM-M-24V90-0-10V-P 13.5 in. 4.5 in. 2.37 in. SPEC SEET YDROUME 24V STRIP IGT SS092617-5.1 4 OF 6
ED DRIVERS CONT. (Required) The following isted ED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications. For additional ED Driver options see Diode ED's product page at: https://www.diodeled.com/products/led-power-supplies.html OMNIDRIVE 2 EECTRONIC DIMMABE ED DRIVER OMNIDRIVE 2 features a zero minimum load and 100-5% dimming range. Compatible with Forward Phase and Reverse Phase Dimmers. Please see Diode ED's Compatibility ist at: https://www.diodeled.com/custom/download/productfile/filename/di-od2-compatibility%20ist.pdf/ DI OD2 24V24 24V24-24V 24 24V60-24V 60 24V96-24V 96 24V120-24V 120 24V200-24V 200 SKU - ENGT - IDT - EIGT DI-OD2-24V24 13.75 in. 3.00 in. 1.60 in. DI-OD2-24V60 13.75 in. 3.00 in. 1.60 in. DI-OD2-24V96 15.00 in. 3.10 in. 2.40 in. DI-OD2-24V120 15.00 in. 3.10 in. 2.40 in. DI-OD2-24V200 16.10 in. 3.40 in. 2.40 in. i-lume 1% ED DIMMABE DRIVER i-lume 1% ED Driver has a minimum load of 5 and dims from 100-1%. 3-ire or 2-ire Dimmers DI-DM 24V40 3D 24V40-12V 40 3D - utron i-lume 1% EcoSystem /3-ireVoltage ED Driver TE - utron i-lume 1% 2-ire ED Driver (120V Forward Phase Only) SKU - ENGT - IDT - EIGT DI-DM-24V40-3D DI-DM-24V40-TE 4.89 in. 4.00 in. 2.62 in. i-lume Premier 0.1% ED DIMMABE DRIVER i-ume Premier 0.1% ED Driver has a minimum load of 5 and dims from 100-0.1%. DI-DM 24V96 24V96-24V 96 3D 3D - utron i-lume Premier 0.1% EcoSystem/3-ire ED Driver SKU - ENGT - IDT - EIGT DI-DM-24V96-3D 5.50 in. 2.20 in. 10.50 in. SPEC SEET YDROUME 24V STRIP IGT SS092617-5.1 5 OF 6
ADDITIONA INFORMATION YDROUME ED STRIP IGT Installation Guide SAFETY / ARNINGS / DISCOSURES 1. Install in accordance with national and local electrical code regulations. 2. This product is intended to be installed and serviced by a qualified, licensed electrician. 3. Only install with a listed Class 2 DC Constant Voltage ED Driver. 4. Not for use in or on walls of pools, fountains, or other partially or fully submersed locations. 5. YDROUME is rated as field-cuttable. Be sure to cut on designated point to avoid damaging the strip light. Do not modify or disassemble product beyond instructions or this warranty will be void. 6. Actual color may vary from what is pictured above and on other print materials due to the limitations of photographic processes. 7. e reserve the right to modify and improve the design of our fixtures without prior notice. e cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output. ARRANTY imited arranty This product has a five (5) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at www.diodeled.com/ limited-warranty/ within the Policies section. For warranty related questions please contact product support. Consumer s Acknowledgment Elemental ED, Inc. stands behind its products when they are used properly and according to our specifications. By pu rchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the correct components is essential. Elemental ED i s able to work with the original purchaser to make an appropriate product selection to t he extent of the limited information that the customer can provide, but it is virtually impossible for Elemental ED to design a system that foresees every unknown factor. For this reason, this arranty does not cover problems caused by improper design, configuration or installation issues. Any statement from an Elemental ED employee or agent regarding a customer s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer s responsibility to adhere strictly to all information contained in the Product Specification Sheets. There is often more than one way to design, configure and layout an ED lighting application properly to achieve the same lighting effect. Elemental ED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Elemental ED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Elemental ED product specifications can make the requisite decisions appropriate for a successful finished lighting application. diode led a division of elemental ED 2017 Elemental ED, Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: 877.817.6028 Fax: 415.592.1596 www.diodeed.com info@diodeed.com SPEC SEET YDROUME 24V STRIP IGT SS092617-5.1 6 OF 6