Quick Reference Guide.050 enterline MicroMaTch onnector Series The Tyco Electronics MicroMaTch connector family, with its contact spacing of 1.27mm, offers a variety of wiretoboard and boardtoboard interconnections. The MicroMaTch contact helps prevent fretting corrosion, the traditional failure mode in tinplated connections. Relative movements caused by vibrations/thermal expansion between male and female contacts are absorbed by an additional positioning spring in the female part. y preventing movements on the contact spot, a gas tight connection can make the MicroMaTch contact spring system fretting corrosion resistant. FETURES N ENEFITS Wire connectors supplied on and suitable for mass termination of 28 WG [0.08 mm2 to 0.09 mm2] ribbon cable Tin plated contact design Gas tight connections Fretting corrosion resistant Full range of application tooling from hand tool to fully automated equipment Wire to oard, and oard to oard Interconnection system PROUT PPLITIONS ar Radios Navigation Systems ashboard Systems ase Stations Phones Set Top oxes udio equipment tycoelectronics.com/products/micromatch
.050 enterline MicroMaTch onnector Series Micro MaTch Product Portfolio Femaleonoard onnector Top Entry Femaleonoard onnector Side Entry 188275 Femaleonoard onnector Surface Mount evice (SM) 215464 Maleonoard onnector 338068 Femaleonoard onnector Top Entry with Latches 338070 Femaleonoard onnector Side Entry with Latches 338069 Femaleonoard onnector Top Entry SM with Labels MaleonWire onnector 338095 & 338096 or 338097 (OSI) rimp on Snap in (OS) onnector 215570 Paddle oard onnector 188431 Femaleinoard SM onnector 338728 Male SM onnector How MicroMaTch onnectors Work The MicroMaTch connector design helps prevent fretting corrosion which is the traditional failure mode in tin plated connections. ue to an additional positioning spring in the female part, relative movements caused by vibrations and thermal expansion between male and female contacts are absorbed. y preventing movements on the contact spot, a gas tight connection is made. This contact spring system featuring the positioning spring, compensates positional tolerances and provides the high contact force required for tin plated contact systems. The MicroMaTch contact spring system is fretting corrosion resistant. I Slot Male ontact Pin hamfer in two directions Female ontact Spring Positioning Spring Solder Post over Male onnector Female onnector.050 enterline MicroMaTch onnector Series I Tyco Electronics
.050 enterline MicroMaTch onnector Series Female and Male onnector pplications Female onnectors Male onnectors 1 188275 2 215464 3 pplication 3 OSI Mated Female and Male onnectors (application and dimension drawings) 1 pplication 2 pplication 1 pplication 2 pplication 3 pplication G E F 1 pplication 2 pplication 3 pplication E Female and Male onnector Image (max) (max) (max) E (max) F (max) G (max) 1 Wiretooard through hole escription 7.5 1 oardtooard through hole 6.2 1 Wiretooard (discrete wire), through hole 9.7 2 Wiretooard right angle, through hole 8.4 2 oardtooard right angle, through hole 7.0 1.6 2 oardtooard right angle, through hole 2.8 2 Wiretooard right angle (discrete wire), through hole 10.6 3 Wiretooard surface mount 8.5 3 oardtooard surface mount, through hole 3 Wiretooard (discrete wire), surface mount 10.7.050 enterline MicroMaTch onnector Series I Tyco Electronics
.050 enterline MicroMaTch onnector Series FEMLEONOR ONNETOR : TOP ENTRY ase Number 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 338068 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 Reel ox Reel ox Reel ox Reel ox Reel kx Reel ox Reel ox Reel ox Reel ox 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 Mates With :, 338095+338096, 338095+338097, 215464, 338728 FEMLEONOR ONNETOR : SIE ENTRY ase Number 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 338070 4 6 8 10 12 14 16 18 20 Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 Mates With :, 338095+338096, 338095+338097, 215464, 338728 FEMLEONOR ONNETOR : SURFE MOUNT EVIE (SM) 24 188275 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 ase Number 338069 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 24 94 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 te: Tape = With vacuum pick and place Mates With :, 338095+338096, 338095+338097, 215464, 338728 MLEONOR ONNETOR ase Number 215464 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 Mates With :,, 188275,, 338068, 338069, 338070, 188431 MLEONWIRE ONNETOR 24 ase Number 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 24 94 Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 pplication Spec : 11419016 Matching able : 167019 Mates With :,, 188275,, 338068, 338069, 338070, 188431 MLE PLE OR ONNETOR 24 ase Number 215570 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 24 94 Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox Reel ox 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500 250 pplication Spec : 11419016 Matching able : 167019 NO MTES irect Soldering of ribbon cable to the P board RIMP ON SNP IN (OSI) ONNETOR ONTTS ase Number Wire Size I 15000/Reel 750/Reel ase Number 338095 4 6 8 10 12 14 16 18 20 338096 2824 WG 0.761.00 1 11 ox ox ox ox ox ox ox ox ox 338097 2420 WG 1.272 1 11 900 700 500 450 400 350 300 250 200 Mates With :,, 188275,, 338068, 338069, 338070, 188431 FEMLEINOR SM ONNETOR Position Size 6 8 10 14 20 ase Number 188431 76 78 80 84 90 Reel Reel Reel Reel Reel 1200 1200 1200 1200 1200 Mates With :, 338095+338096, 338095+338097, 215464, 338728 MLE SM ONNETOR ase Number 338728 4 74 6 76 8 78 10 80 12 82 14 84 16 86 18 88 20 90 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Mates With :,, 188275,, 338068, 338069, 338070, 188431.050 enterline MicroMaTch onnector Series I Tyco Electronics
.050 enterline MicroMaTch onnector Series Product/pplication Specification Femaleonoard Side Entry 338095 OSI onnector Femaleonoard Top Entry Femaleonoard Side Entry 215464 Maleonoard onnector 338728 Male SM onnector Femaleonoard Side Entry 215570 Paddle oard onnector MaleonWire connector MaleonWire onnector 188431 Femaleinoard SM MaleonWire onnector Femaleonoard onnector MaleonWire onnector 338068 Femaleonoard Top Entry MicroMaTch onnector System pplication Tooling Hand Tools 7341551 7340241 7348701 7348702 Pistol grip dapter set OSI 2420 WG OSI 2824 WG ench Tools 7332803 910852 911123 7332782 Tool set Hand operated Pneumatically operated Tool set Semiutomatic Tools 6774991 6778941 6778951 6774125 16774120 6774631 MPOLETRI Gterminator pplicator for MPOLETRI Gterminator 2824 WG pplicator for MPOLETRI Gterminator 2420 WG Lead end assemblies Lead end assemblies onnector dispenser MicroMatch esign Kits Provided by Waldom* esign Kits PN escription 21108411 Femaleonoard Top Entry / Maleonoard 21108412 Femaleonoard Top Entry / MaleonWire 21108413 Femaleonoard Side Entry / Maleonoard 21108414 Femaleonoard Side Entry / MaleonWire 21108415 Femaleonoard Surface Mount / Maleonoard 21108416 Femaleonoard Surface Mount / MaleonWire 21108417 Paddle oard onnectors 21108418 rimp on Snap In (OSI) Housings and ontacts *esign kits are designed and assembled by Waldom and are available for purchase through your local distribution channel..050 enterline MicroMaTch onnector Series I Tyco Electronics
Frequently asked questions an we make MicroMaTch connectors with contacts in Gold plating?. The MicroMaTch receptacle contact spring is designed to deliver a high normalforce as required for tinplated contact interconnections. This pressure is too high for gold plated interconnections, where much lower normalforces are required. We have noticed that the kinks of the MicroMaTch thruhole solder contacts on Top Entry as well as Side Entry Thruhole solder onnectors, start with random direction. Is this technically OK? Yes, this is OK and does not affect contact retention. For those connectors the kink direction in each row can start random, but sequential contacts within each row have kinks pointing in opposite directions. re MicroMaTch maleonwire and paddleboard connectors also suitable for discrete wire termination?. For discrete wires, MicroMaTch connectors offer the rimpon SnapIn (OSI) connectors in 2 wire ranges. Is there retention force performance information available for the female connector versions with locking latches?. The plastic latches were not designed to retain the connectors but to produce an audible click when the connectors are fully mated. Which flat ribbon cable is suitable for MicroMaTch maleonwire and paddleboard connectors and why? Tyco Electronics part number 167019series Flat Ribbon able. The cable insulation s round shape at each position and the flat transition between the positions, both exactly match with corresponding shape in the. This enables accurate prepositioning of the conductors regarding to the Islots during the termination process. It is also Important that the conductor s pitch is within tolerance and that they are symmetrically positioned in the round insulation shape. FOR MORE INFORMTION www.tycoelectronics.com/products/micromatch Technical Support Internet: www.tycoelectronics.com/help US: +1 (800) 5226752 anada: +1 (905) 4704425 Mexico & entral merica: +52(0) 5511060814 South merica: +55 (0) 1121036000 Germany: +49 (0) 62511331999 UK: +44 (0) 800267666 France: +33 (0) 134208686 Netherlands: +31 (0) 736246999 hina: +86 (0) 4008206015 Part numbers in this brochure are RoHS ompliant*, unless marked otherwise. *as defined www.tycoelectronics.com/leadfree Tyco Electronics orporation, Harrisburg, P tycoelectronics.com 2010 Tyco Electronics orporation. ll Rights Reserved. 417734571 IS FP 3M 04/2010 TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors. Other products, logos, and ompany names mentioned herein may be trademarks of their respective owners. While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is errorfree, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. onsult Tyco Electronics for the latest dimensions and design specifications.