MovinCool Classic and Classic Plus Series The Portable Spot Cooling Solution
When the heat is on, turn on the MovinCool Classic & Classic Plus series People, processes, and equipment don t perform well under extreme heat. That s why more companies rely on the proven performance of our MovinCool Classic and Classic Plus series units to spot air condition their heat-sensitive areas. MovinCool s portable air conditioning system: Improves employee moral and manufacturing quality relieving workers from extreme environments to increase productivity and prevent heat exhaustion. Reduces excess cool-down time for production processes eliminating heat-related defects and additional scrap. Protects equipment from downtime due to heat saving systems from a costly failure or shutdown, which can cripple daily operations. DENSO, the pioneer of portable air conditioning and manufacturer of MovinCool is a registered ISO 9002 facility. Every unit passes through a series of performance tests to ensure 100% quality and is UL approved. So when the heat starts, stop it with the MovinCool Classic and Classic Plus portable air conditioning systems. Features Digital Temperature Controls Up to 26,000 Btu/h of Cool Air Economical Handles Wide Operating Temperature Ranges Rugged Reliable Design Dramatic Temperature Drop Totally Self-Contained No Costly Installation Needed Benefits Easy-to-use digital controls let you set the desired temperature.* Maximum spot air conditioning Btu/h provides cool air to just the spot that needs it. Costs as little as 10 cents per hour to run. Operates in high temperature ranges, far beyond what most air conditioners can handle. Performs in the harshest environments, 24 hours a day, seven days a week. Up to a 30-degree drop from ambient temperature, required for effective spot air conditioning. All-in-one design provides for convenient, low maintenance operation. Simply roll it in, plug it in and turn it on! ** * For Classic Plus 14 and Classic Plus 26 models only. ** Exhaust duct required in some applications. The Classic 2002 American Standard Inc. All rights reserved
MovinCool Classic/Classic Plus Series Auto Condensate Removal Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has an 18-ft lift capacity to reach virtually any remote drain. With the condensate pump installed, drainage is automatic and access to the compartment is no longer necessary. A cover plate can then be added to conceal and protect the pump. 9 Cover Plate COV03325 484009-0480 COV03325 484009-0480 COV03325 484009-0480 COV03325 484009-0480 10 Condensate PMP01587 CPK2 PMP01586 CPK1 PMP01588 CPK3 PMP01589 CPK4 Pump Kit Condenser Air Removal To exhaust the warm condenser air above the work area, attach the warm air flange and duct to the top of the unit. When using MovinCool inside an office, simply replace the ceiling tile with the MovinCool ceiling tile and insert the duct to exhaust the warm air. No special tools or equipment are required for the installation. 5 Warm Air Flange FLG01056 481170-0190 FLG01056 481170-0190 FLG01056 481170-0190 FLG01056 481170-0190 6 Warm Air Duct DUC01043 481744-0060 DUC01043 481744-0060 DUC01043 481744-0060 DUC01043 481744-0060 7 Ceiling Tile PLT03642 LA146373-8280 PLT03642 LA146373-8280 PLT03642 LA146373-8280 PLT03642 LA146373-8280 Make-Up Air When balanced air flow is required, attach the air plenum with a duct from the side of the unit to an outside air source. The air to the condenser is pulled from outside the room to eliminate problems associated with negative air pressure. 6 Air Duct DUC01043 481744-0060 DUC01043 481744-0060 DUC01043 481744-0060 DUC01043 481744-0060 7 Ceiling Tile PLT03642 LA146373-8280 PLT03642 LA146373-8280 PLT03642 LA146373-8280 PLT03642 LA146373-8280 8 Air Plenum KIT07912 LAY84270-0040 KIT07910 LAY84270-0020 KIT07910 LAY84270-0020 KIT07911 LAY84270-0030 Remote Cooling The amount of air supplied to remote areas can be quickly and conveniently increased by attaching 10 ft extension ducts directly over the standard ducts. For more permanent installations, use the flange and clamp to secure the extension ducts to the unit. Each duct can be extended 30 to from the unit, depending on the model. Add trim rings to the end of the extension ducts to give a finished look and keep the ducts from unraveling. The dual duct accessory can be used to divide each 5 in. nozzle opening into two 4 in. outlets to multiply your cooling options. 1 Cold Air Flange FLG01055 481170-0180 FLG01055 481170-0180 FLG01055 481170-0180 FLG01058 481170-0250 2 Extension Duct DUC01044 481744-0090 DUC01044 481744-0090 DUC01044 481744-0090 DUC01041 481744-0030 3 Trim Ring RNG01760 481851-0200 RNG01760 481851-0200 RNG01760 481851-0200 RNG01761 481851-0210 4 Dual Duct DUC01045 484209-0030 DUC01045 484209-0030 DUC01045 484209-0030 N/A N/A Auto Condensate Removal Condenser Air Removal Remote Cooling Make-Up Air
Accessories Part Descriptions for MovingCool Classic/Classic Plus 1 Cold Air Flange 5 in. or 6 in. diameter white metal flange with wire clamp and mounting screws. 2 Cold Air Extension Duct 5 in. or 6 in. diameter white plastic duct that extends from 6 1 2 ft to 10 ft in length. 3Trim Ring 4Dual Duct 5 in. or 6 in. diameter black plastic ring mounts as end caps for extension ducts. 5 in. diameter white plastic flange with two 4 ft nozzles that extend to 3 1 2 ft in length. 5 Warm Air Flange 12 in. diameter gray metal flange with wire clamp and mounting screws. 6Warm Air Duct 12 in. adjustable diameter white plastic duct that extends from 6 1 2 ft to 10 ft in length. 7 Ceiling Tile 24 in. x 24 in. white tile with 12 in. hole for warm air duct. 8Air Plenum White plastic plenum, hinged for filter cleaning. 9Cover Plate Blue metal plate covers condensate collection area. 10 Condensate Pump Kit 110V or 220V pump kit includes 3 8 in. diameter x 20 ft length hose and installation hardware.
Classic & Classic Plus Specs Features Cooling Capacity Electrical Characteristics Fans Evaporator Condenser Compressor R-22 Charge Dimensions Net Weight/Shipping Weight Power Cord Condensate Tank Capacity Operating Conditions Max. Duct Length Max. Sound Level MovinCool PN Trane PN Control Panel Thermostat Control (Btu/h) Rating conditions: 95 F at 60% RH Voltage Requirement Total Power Consumption Current Consumption Recommended Fuse Size NEMA Plug Configuration Min. Max. Voltage Motor Output high/low Fan Type Max. Air Flow high/low Max. External Static Pressure Fan Type Max. Air flow high/low Max. External Static Pressure Type Output W x D x H Gauge Length Min. Max. (@ 50% RH) Per Cold Duct Hose Hot Duct Hose With Condenser Duct high/low Without Condenser Duct high/low Classic 10 UNT00863 10,000 Btu/h 1 Phase,115V 1.1 kw 10.6 amps 15 amps 5 15 104 126 0.14 kw 270 CFM 0.33 IWG 740 CFM 0.13 IWG Hermetic Rotary 0.6 kw 1.15 lb 19 x 26 x 41 in 145/170 lb 14 AWG (3-core) 6 ft 68 105 F 40 ft 55 db 58 db Classic 18 UNT00864 18,000 Btu/h 1 Phase, 208/230V 2.1 kw 10.8/10.0 amps 15 amps 6 15 187 253 0.35 kw 530 CFM 0.52 IWG 1180 CFM 0.25 IWG Hermetic Rotary 1.1 kw 1.59 lb 19 x 26 x 41 in 167/200 lb 14 AWG (3-core) 6 ft 68 105 F 50 ft 63 db 67 db Classic Plus 14 UNT00861 14,000 Btu/h 1 Phase,115V 1.3 kw 12.3 amps 15 amps 5 15 104 126 0.24/0.19 kw 440/380 CFM 0.31 IWG 880/760 CFM 0.19 IWG Hermetic Rotary 0.8 kw 1.5 lb 19 x 26 x 41 in 153/195 lb 14 AWG (3-core) 10 ft 70 115 F 30 ft 57/55 db 60/58 db Classic Plus 26 UNT00862 26,000 Btu/h 1 Phase, 208/230V 3.1 kw 15.6/14.0 amps 20 amps L6 20 187 253 0.55/0.38 kw 708/600 CFM 0.54 IWG 1680/1460 CFM 0.25 IWG Hermetic Scroll 1.6 kw 1.87 lb 19 x 29 x 47 in 235/265 lb 12 AWG (3 core) 6 ft 70 115 F 45 ft 66/64 db 69/67 db All specifications subject to change without notice. Standard warranty includes 12 months on entire unit. All models are UL listed and feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from specifications listed above. DENSO SALES CALIFORNIA, INC. REGISTERED TO ISO 9002 FILE NO. A5537 2002 DENSO SALES CALIFORNIA, INC. MovinCool is a registered trademark of DENSO Corporation.
The Trane Company An American Standard Company www.trane.com For more information contact your local district office or e-mail us at comfort@trane.com Literature Order Number Date Supersedes Stocking Location February 2002 New La Crosse Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice.