Products for the area

YOUR WISHES ARE OUR BENCHMARK Products for the area Catalogue 11

Table of contents Cable reels Introduction 502 series Stahl 502 series CEAG 518 series Stahl 518 series CEAG Pages 4-7 Page 3 Page 4 Page 5 Page 6 Page 7 LED floodlights FlutLED-Ex 120W FlutLED-Ex 150W Pages 8-9 Page 8 Page 9 Hand-held lights FlashLED-Ex Rechargeable battery light Ex-Rubber handheld lights Pages 10-11 Page 10 Page 11 Battery lights PX0/PX1/PX2 HL-P1 Head / helmet light Accessory MITYLITE 3315Z0 HEADS UP LITE Head / helmet lights Pages 12-17 Page 12-13 Page 13 Page 14-15 Page 16 Page 16 Page 17 Practical examples Practical examples Page 18-19 Page 18-19 2 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Introduction Anywhere that flammable gases, vapours or dusts occur which mix with air or oxygen is at risk of explosion. This does not just relate to plants in the chemical industry and mining, but even bottling plants for highpercentage spirits or a grain silo can represent a potential source of explosion. Any unwanted explosion endangers the health and lives of anyone located nearby and is very likely to lead to serious material damage. All EX-equipment must bear a label from which the user can identify the explosive environments for which the equipment is suitable. The first part of the label is made up of the equipment group and its category. EC Directive RL 94/9/EC (ATEX 100a) In 1994, the EC Directive RL 94/9/EC (ATEX 100a), or "ATEX" for short, was passed. This directive regulates the approval of explosive equipment and makes demands on the quality management systems used by manufacturers of explosive equipment. Standards for explosion protection Explosion protection for electrical devices is defined in standards DIN EN 50014 to 50028 and EN 60079. DIN EN 50014 describes the principles of explosion protection and the subsequent standards describe the individual ignition protection categories. EN 60079 describes the local installation of explosive equipment. Zones and categories One criterion is the division into zones of varying explosive risk. Zones 0, 1 and 2 are defined for gases and zones 20, 21 and 22 for dust. Explosion groups Explosion-protected electrical equipment is categorised into two groups: Group I Electrical equipment for mine workings at risk of fire damp Group II Electrical equipment for all areas at risk of explosion other than mine workings at risk of fire damp The equipment in Group II is further categorised, based on the properties of the explosive-risk atmosphere for which it is intended, into: IIA, IIB, IIC. An explosive-risk atmosphere with classification IIC is therefore the easiest to ignite, while one with a IIA category is the hardest. Consequently, equipment with approval for IIC can also be used for IIB and IIA. Explosion risk Explosive atmosphere is constantly present or present for a long time Explosive gas atmosphere is occasionally present Explosive gas atmosphere is rare and even then only present for a short time Example Gas Dusts Resulting category Inside Zone 0 Zone 20 1 containers In the area around filling and emptying openings Areas around zone 1 Zone 1 Zone 21 2 Zone 2 Zone 22 3 Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 3

Cable reels 502 series with plug connections by Stahl Illustration similar Solid rubber cable reel in EX design Suitable for zone 1 and 2 Zinc-plated steel tube frame, black powder-coated with brass feet Design with K2 and EX labelling With warning notice: "Using the cable reel in an environment at risk of explosion of gas group IIC is only permitted if the cable is first connected or the cable reel is standing on a conductive base or conductive and earthed base." High mechanical stability Impact-resistant and ageing-resistant Internal wedge brake Maintenance-free Resistant to chemical influences Resistant to oils and acids UV and weather resistant Safety precautions Always read the label on the cable reel before use! Cable reel 502Ex is not suitable for zones 0, 20, 21 and 22. The temperature class and ignition protection classes specified on the equipment must be complied with. In order to avoid the non-permitted heating of cables, particularly while coiled, the maximum loads specified must not be exceeded. The use of cable reel 502Ex in explosion group IIC is only permitted if the cable is first connected or the cable reel is standing on a conductive base or conductive and earthed base. Otherwise, the cable reel can be used in all zones only in explosion group IIA and IIB. No modifications or alterations must be made to the cable reels. The cable reels must only be operated in undamaged condition. Note national safety and accident prevention regulations. II 2 G, CE 0102 Explosion protection: EEX de IIC, IIB, T6 Test report: PTB Ex 04-14334 EC type approval certificate: PTB 03 ATEX 1186 Dimensions: 300x410x230 mm Protection category: IP 54 Sim. factor: 1 Weight: approx. 13 kg Spare parts No individual or spare parts are supplied for safety reasons. Professional repairs with recorded final checks must only be carried out at the manufacturer's. Article No. Designation Current strength/ voltage in V/A Equipment 251152 502 Ex 400/16 Input: 30 m GIFAS-PROFLEXX-07 cable 5x2.5 mm 2, CEE plug 5x16A/400V, made by Stahl Output: 1 CEE built-in socket 5x16A/400V, no fuse, made by Stahl 502EXR30525/1/16/SN 251137 502 Ex 230/16 Input: 30 m GIFAS-PROFLEXX-07 cable 3x2.5 mm 2, CEE plug 3x16A/230V, made by Stahl Output: 1 CEE built-in socket 3x16A/230V, made by Stahl 502EXR30325/13P/163P/SN 4 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Cable reels 502 series with plug connections by CEAG GIFAS solid rubber cable reel in EX design Suitable for zone 1 and 2 Zinc-plated steel tube frame, black powder-coated with brass feet Design with K2 and EX labelling With warning notice: "Using the cable reel in an environment at risk of explosion of gas group IIC is only permitted if the cable is first connected or the cable reel is standing on a conductive base or conductive and earthed base. " High mechanical stability Impact-resistant and ageing-resistant Internal wedge brake Maintenance-free Resistant to chemical influences Resistant to oils and acids UV and weather resistant Safety precautions Always read the label on the cable reel before use! Cable reel 502Ex is not suitable for zones 0, 20, 21 and 22. The temperature class and ignition protection classes specified on the equipment must be complied with. In order to avoid the non-permitted heating of cables, particularly while coiled, the maximum loads specified must not be exceeded. The use of cable reel 502Ex in explosion group IIC is only permitted if the cable is first connected or the cable reel is standing on a conductive base or conductive and earthed base. Otherwise, the cable reel can be used in all zones only in explosion group IIA and IIB. No modifications or alterations must be made to the cable reels. The cable reels must only be operated in undamaged condition. Note national safety and accident prevention regulations. II 2 G, CE 0102 Explosion protection: 400V EEX de IIC, IIC, T6 230V EEX de IIC, IIB, T6 Test report: PTB Ex 04-14078 EC type approval certificate: PB03 ATEX 1186 G4 Dimensions: 300x410x230 mm Protection category: IP 54 Sim. factor: 1 Weight of 502 Ex 400V/16A: approx. 13 kg 502 Ex 230V/16A: approx. 18 kg Spare parts No individual or spare parts are supplied for safety reasons. Professional repairs with recorded final checks must only be carried out at the manufacturer's. Article No. Designation Current strength/ voltage in V/A Equipment 247373 502 Ex 400/16 Input: 30 m GIFAS-PROFLEXX-07 cable 5x2.5 mm 2, CEE plug 5x16A/400V, made by CEAG Output: 1 CEE built-in socket 5x16A/400V, no fuse, made by CEAG 502EXBR30525/1/16/C 247389 502 Ex 230/16 Input: 50 m GIFAS-PROFLEXX-07 cable 3x2.5 mm 2, CEE plug 3x16A/230V, made by CEAG Output: 1 CEE built-in socket 3x16A/230V, made by CEAG 502EXBR50325/13P/163P/C 248070 Moveable 502 Ex 230/16 Input: 50 m GIFAS-PROFLEXX-07 cable 3x2.5 mm 2, CEE plug 3x16A, 230V, made by CEAG Output: 1 CEE built-in socket 3x16A/230V, no fuse, made by CEAG 502EXF50325/13P/163P/C Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 5

Cable reels 518 series with plug connections by Stahl EX solid rubber cable drum as per DIN 14680-A1 Made from zinc-plated sheet steel with powder coating in RAL 5002 (blue) with solid rubber carrying handle Velcro strip for lateral fastening of the plug Rotating auxiliary drum Without slip rings and thermal overload protection Brass feet for low earth contact resistance and spark protection For explosion-risk areas Zone 1, Zone 2 High mechanical stability Impact-resistant and ageing-resistant External, maintenance-free parking brake Resistant to chemical influences Resistant to oils and acids UV and weather resistant II 2 G, EEx de IIA T6 Explosion protection: EEx de IIA T6 Test report: PTB Ex 06-16168 EC type approval certificate: PTB03 ATEX 1186 Dimensions: 512x380x310 mm Protection category: IP 65 Sim. factor: 1 Weight of 518 Ex 230V/16A: approx. 24 kg 518 Ex 400V/16A: approx. 30 kg Safety precautions Always read the label on the cable reel before use! Cable reel 518 Ex is not suitable for zones 0, 20, 21 and 22. The temperature class and ignition protection classes specified on the equipment must be complied with. In order to avoid the non-permitted heating of cables, particularly while coiled, the maximum loads specified must not be exceeded. No modifications or alterations must be made to the cable reels. The cable reels must only be operated in undamaged condition. Note national safety and accident prevention regulations. Standards conformity Underlying safety and health requirements satisfied by EN 500014:1997 + A1 + A2, EN 500018:2000, EN 50019:2000. Correspond to the Directive of the European Council 94/9 EC Produced and tested in accordance with the manufacturer standards DIN EN 60309:2000, DIN EN 61242:1997 and DIN EN 61316:2000 Spare parts No individual or spare parts are supplied for safety reasons. Professional repairs with recorded final checks must only be carried out at the manufacturer's. Place of employment In explosion-risk areas such as chemistry, fire brigades, tank storage, filling stations, fuel stores, etc. 512 Article No. Designation Current strength/ voltage in V/A Equipment 261750 518 Ex 230/16 Input: 5 m GIFAS-PROFLEXX-07 cable H07RN-F 3x2.5 mm 2 with EX plug 3x16A/230V, made by Stahl Output: 45 m GIFAS-PROFLEXX-07 cable H07RN-F 3x2.5 mm 2, with EX connector 3x16A/230V, made by Stahl 518EX45325+5/13P/37/SN 261751 518 Ex 400/16 Input: 5 m GIFAS-PROFLEXX-07 cable H07RN-F 5x2.5 mm 2 with EX plug 5x16A/400V, made by Stahl Output: 45 m GIFAS-PROFLEXX-07 cable H07RN-F 5x2.5 mm 2, with EX connector 5x16A/400V, made by Stahl 518EX45525+5/1/57/SN 6 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Cable reels 518 series with plug connections by CEAG EX solid rubber cable drum as per DIN 14680-A1 Made from zinc-plated sheet steel with powder coating in RAL 5002 (blue) with solid rubber carrying handle Velcro strip for lateral fastening of the plug Rotating auxiliary drum Without slip rings and thermal overload protection Brass feet for low earth contact resistance and spark protection For explosion-risk areas Zone 1, Zone 2 High mechanical stability Impact-resistant and ageing-resistant External, maintenance-free parking brake Resistant to chemical influences Resistant to oils and acids UV and weather resistant II 2 G, EEx de IIA T6 Explosion protection: EEx de IIA T6 Test report: PTB Ex 06-16168 EC type approval certificate: PTB03 ATEX 1186 Dimensions: 554x380x310 mm Protection category: IP 65 Sim. factor: 1 Weight of 518 Ex 230V/16A: approx. 24 kg 518 Ex 400V/16A: approx. 30 kg Safety precautions Always read the label on the cable reel before use! Cable reel 518 Ex is not suitable for zones 0, 20, 21 and 22. The temperature class and ignition protection classes specified on the equipment must be complied with. In order to avoid the non-permitted heating of cables, particularly while coiled, the maximum loads specified must not be exceeded. No modifications or alterations must be made to the cable reels. The cable reels must only be operated in undamaged condition. Note national safety and accident prevention regulations. Standards conformity Underlying safety and health requirements satisfied by EN 500014:1997 + A1 + A2, EN 500018:2000, EN 50019:2000. Correspond to the Directive of the European Council 94/9 EC Produced and tested in accordance with the manufacturer standards DIN EN 60309:2000, DIN EN 61242:1997 and DIN EN 61316:2000 Spare parts No individual or spare parts are supplied for safety reasons. Professional repairs with recorded final checks must only be carried out at the manufacturer's. Place of employment In explosion-risk areas such as chemistry, fire brigades, tank storage, filling stations, fuel stores, etc. Article No. Designation Current strength/ voltage in V/A Equipment 247636 518 Ex 230/16 Input: 5 m GIFAS-PROFLEXX-07 cable H07RN-F 3x2.5 mm 2 with EX plug 3x16A/230V, made by CEAG Output: 45 m GIFAS-PROFLEXX-07 cable H07RN-F 3x2.5 mm 2, with EX connector 3x16A/230V, made by CEAG 518EX45325+5/13P/37/C 247886 518 Ex 400/16 Input: 5 m GIFAS-PROFLEXX-07 cable H07RN-F 5x2.5 mm 2 with EX plug 5x16A/400V, made by CEAG Output: 45 m GIFAS-PROFLEXX-07 cable H07RN-F 5x2.5 mm 2, with EX connector 5x16A/400V, made by CEAG 518EX45525+5/1/57/C Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 7

LED floodlights FlutLED-Ex 120W The FlutLED-Ex 120W is suitable for all areas that require an efficient and extremely robust ex-lamp, with an excellent light output. Applied to oil refineries, offshore oil platform, power plants and chemicals plants, fire fighting, tunnels as well as harbours. sturdy casting aluminum housing with anti-static and anti-corrosion powder painting flame-proof, water-proof, dust-proof lens made of high tempered glass wich is special designed to different beam angle low power consumption with high light power Art. No. Description 281814 FlutLED-Ex 120W 60 281815 FlutLED-Ex 120W 120 Designation: Ex II 2 G - Ex d IIB T5 Gb Ex II 2 D - Ex t IIIC T95 C Db Protection category: IP66 Ex-Zone: 1, 2, 21 and 22 Power: 120W Operating voltage: 90-305VAC Frequency: 50/60Hz Luminous efficiency: 90lm/W Illuminant: LED Chip Color temperature: 5000K-6500K Temperature range: -40 C to +45 C Bulb lifetime: > 50.000h Dimensions: WxHxD=300x300x226mm Weight: 6,3kg Beam angle 60 Beam angle 120 8 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

LED floodlights FlutLED-Ex 150W The FlutLED-Ex 120W is suitable for all areas that require an efficient and extremely robust ex-lamp, with an excellent light output. With its excellent light power this Explosion-proof LED floodlight is suitable for oil refineries, power plants also chemicals plants, ACCESSORIES offshore oil platform, fire fighting, public security as well as stadium lighting. optional optional parts parts Installation NO. Installation accessories accessories excellent efficiency and high light output by 90 LED s NO. anti glare, reduces glare in applications where the user may 11 Bracket Bracket have direct visual contact with the light source shock and vibration resistant tempered glass 22 Stanchion Stanchion Bracket Bracket high strength aluminum alloy housing optional and optimum luminous intensity distribution for different applications 33 Art. No. Description 281816 FlutLED-Ex 150W 60 281817 44 FlutLED-Ex 150W 120 Bracket 281899 Stanchion Mount* 282044 Pole mount bracket 281900 Loop 281901 Pipe Designation: Protection category: Ex-Zone: Power: Operating voltage: Picture Material Weight Picture Material Weight Frequency: (Unit Kg) (Unit Kg) Luminous efficiency: 0.4 Q235 0.4 Illuminant:Q235 Color temperature: Q235 2.26 Q235 2.26 Temperature range: Lebensdauer: Q235 1.63 Q235 1.63 Dimensions: Weight: Loop Loop Ex II 2 G - Ex d e IIB T5 Gb Ex II 2 D - Ex t IIIC T95 C Db IP 66 1, 2, 21, and 22 150W 180-277VAC QTY QTY 50/60Hz 90lm/W 11 90 LED s 4700K-5400K 11-40 C bis +55 C > 50.000h 11 WxH=426x187mm, Ø410mm 13,5kg Q235 Q235 2.26 2.26 11 45#+SUS304 45#+SUS304 0.26 0.26 11 Bracket Accessories 281898 Stanchion Stanchion Bracket Bracket 55 Pipe Pipe 66 Guards Guards SUS304 SUS304 0.26 0.26 11 Q235 Q235 0.38 0.38 11 Stanchion Mountl Loop Pipe Accessories Accessories Loop Loop Bracket Bracket Stanchion Stanchion Mount Mount 281902 Guards * mandatory accessories 281899 Stanchion Mount Pole mount Pipe Pipe bracket with Stanchion Mount Delivery status: The light is excluding accessories! Stanchion Stanchion Mount Mount Guards Luminaires Luminaires Beam angle 60 Beam angle 120 Guards Guards 88 Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 9

Hand-held lights FlashLED-Ex Rechargeable battery light The tried-and-tested FlashLED concept is now also available for areas at risk of explosion! As a result, GIFAS is offering a powerful work and inspection light with emergency light function for explosive areas. The FlashLED-Ex is equipped with an environmentally friendly, rechargeable lithium polymer (LiPo) battery. The light is charged outside the explosionrisk area. The FlashLED-Ex is certified and satisfies the requirements of the European Low Voltage Directive 2006/95/EC, Directive 2004/108/EC on Electromagnetic Compatibility and ATEX Directive 94/9/EC. Sturdy, shatter-proof polyamide housing Up to 8 hours of light in three selectable operating modes: - Broad beam: concentrated, narrow and wide light beam - Work light (emergency light): broad light cone - Side light: space-illuminating economy light Extremely bright light Incl. charger with corrosion-resistant contacts Charging station can be used as a wall-mounted model Overcurrent, temperature and deep discharge protection Vertical-swivel lamp head, dimmable, flash mode Memory function = last setting is saved The light can be locked in the charging station (shackle lock not included in the scope of delivery). Certification: 2006/95/EC European Low Voltage Directive 2004/108/EC Directive on Electromagnetic Compatibility ATEX Directive 94/9/EC II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135 C Db DEKRA 12ATEX0193X 230 V AC, 12/24 V DC Lithium polymer rechargeable battery 6.5 hours max. 8 hours 5x1.6W Power LEDs, white ATEX Certification No.: Operating voltage: Power supply: Charging time: Light duration: Illuminant: Light protection category: IP 65 Ambient temperature: -20 C<Ta<+50 C Temperature class: T4 EX risk areas: Zones 1, 2, 21 and 22 Gas group: IIC Dust group: IIIC Dimensions (WxHxD) - Light excl. charging station: 125x260x92.5 mm - Light incl. charging station: 149x332x106 mm - Charging station: 149x276x95 mm Weight - Light: 1.4 kg - Charging station: 700 g Article No. Design 800011 FlashLED-EX rechargeable hand-held light 860032 230V charger / wall holder 860027 12/24V charger / wall holder 266884 12/24V charging cable 266850 shoulder strap wall holder 10 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Hand-held lights Ex-rubber hand-held light 230V Ex-rubber hand-held light 24V Sturdy and handy light Impact-resistant rubber holding grip, round protective cage and rubber cap The stable protective cage with hanging hook can be removed. The safety glass with pressure buffer on the protective cage is impact-resistant and resistant to changes in temperature. Grip and cap made from oil and acid-resistant rubber. The light is dust-tight and hose water-protected. The illuminant is a shock-resistant Gifalux bulb. EC type approval certificate: Explosion-protected to: II 2G EEx ed IIA T3 IBExU03 ATEX 1018X EN 50014: 1997 + A1 + A2 EN 50018: 2000 and EN 50019: 2000 EX risk areas: Zones 1 Protection category: IP 54 Permissible ambient temperature: -20 C to +40 C Weight (without connecting cable): 2,3 kg Temperature class: Explosion protection group: Dimension: T3 IIA 35 cm Sturdy and handy light Impact-resistant rubber holding grip, round protective cage and rubber cap The stable protective cage with hanging hook can be removed. The safety glass with pressure buffer on the protective cage is impact-resistant and resistant to changes in temperature. Grip and cap made from oil and acid-resistant rubber. The light is dust-tight and hose water-protected. The illuminant is a shock-resistant Gifalux bulb. II 2G EEx ed IIC T3 II 2D T145 C EC type approval certificate: PTB 01 ATEX 2144 Explosion protection: II 2G EEx ed IIC (Zone 1) II 2D T145 C (Zone 21) Protection category: IP 65 Permissible ambient temperature: -20 C to +40 C Temperature class: T3 Explosion protection group: IIC Article Type No. 250437 EX rubber hand-held light with industrial bulb 230 V/60 W, E27 bracket Design Mounted with 10 m NSSHÖU 2x1.5 mm 2 CEE-EX-plug 3x16A/230V in EX design, made by CEAG Article Type No. 255019 EX rubber hand-held light with industrial bulb 24V/60W, E27 bracket Design Mounted with 10 m GIFAS- PROFLEXX-07 cable 2x1.5 mm 2 CEE-EX-plug 2x16A/24V in EX design, made by CEAG Designs with other cable lengths or plug connections made by Stahl are possible. Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 11

Battery lights PARALUX PX0 PARALUX PX1 ATEX Zone 0 approved / Dust approved Zone 21 100% waterproof Made from non-conductive plastic, and offers protection as per ESD/EMI/RFI Compatible with almost every helmet mount and PARASNAP Rubberized lamp head Rear switch for one-handed operation II 1G Ex ia IIC T4 Ga II 2D Ex ib IIIC T105 C Db IP68 Explosion zone : 0/21 Batteries: 4xAA Alkaline Housing: XAG (Plastic), red Light source: 3W CREE LED, white Light output: 120lm Light range: 150m Light duration: 15h full power 50h overall Protection category: IP68 Dimensions (HxL): 38x167mm Weight incl. batteries: 170g ATEX Zone 1 approved / Dust approved Zone 21 100% waterproof Made from non-conductive plastic Compatible with almost every helmet mount and PARASNAP Rubberized lamp head Rear switch for one-handed operation II 2G Ex ib IIB T4 Gb II 2D Ex ib IIIC T105 C Db IP68 Explosion zone : 1/21 Batteries: 4xAA Alkaline Housing: PC (Polycarbonat), yellow Light source: 3W CREE LED, white Light output: 120lm Light range: 150m Light duration: 15h full power 50h overall Protection category: IP68 Dimensions (HxL): 38x167mm Weight incl. batteries: 170g Article No. Designation 283286 PARALUX PX0 inkl. Batteries Article No. Designation 283285 PARALUX PX1 inkl. Batteries 12 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Battery lights PARALUX PX2 PARALUX PX1 ATEX Zone 1 approved 100% waterproof Made from non-conductive plastic Clip for attachment Compatible with PARASNAP Rubberized lamp head Rear switch for one-handed operation II 2G Ex ib IIB T4 Gb Explosion zone : 1 Batteries: 2xAAA Alkaline Housing: PC (Polycarbonat), yellow Light source: 1W CREE LED, white Light output: 30lm Light range: 35m Light duration: 10h Protection category: IP68 Dimensions (HxL): 19x143mm Weight incl. batteries: 40g ATEX Zone 1 approved 100% waterproof Made from non-conductive plastic Adjustable rubber-/neoprene band Rubberized lamp head with adjustable beam angle Rear switch for one-handed operation II 2G Ex ib IIB T4 Gb Explosion zone : 1 Batteries: 4xAAA Alkaline Housing: PC (Polycarbonat), yellow Light source: 3W CREE LED, white Light output: 120lm Light range: 150m Light duration: 12h full power 45h overall Protection category: IP68 Dimensions (HxL): 65x70mm Weight incl. batteries: 170g Article No. Designation 283284 PARALUX PX2 inkl. Batteries Article No. Designation 283287 PARALUX HL-P1 inkl. Batteries Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 13

Battery lights PARASNAP BASE LEFT Helmet mount PARASNAP SNAP-IN1 Light Holder Helmet mount, base for wearing on the left Base holder left for PX1 and PX2 Required is SNAP-IN1 (PX0, PX1) or SNAP-IN2 (PX2) Mountable on almost every DINhelmet Material: PA and VA plate Dimensions: 35x60mm Gewicht: 65g Mounting clip for PX0 and PX1 Magnetic counterpart to PARASNAP BASE left, right or belt mount The holder is simply clicked onto the side of the light body Material: PA Dimensions: 50x40mm Gewicht: 11g Artikel Nr. Bezeichnung 283288 PARASNAP Base left Artikel Nr. Bezeichnung 283290 PARASNAP SNAP-IN1 PARASNAP BASE RIGHT Helmet mount PARASNAP SNAP-IN2 Light Holder Helmet mount, base for wearing on the right Base holder left for PX1 and PX2 Required is SNAP-IN1 (PX0, PX1) or SNAP-IN2 (PX2) Mountable on almost every DINhelmet Material: PA and VA plate Dimensions: 35x60mm Gewicht: 65g Mounting clip for PX2 Magnetic counterpart to PARASNAP BASE left, right or belt mount The holder is simply clicked onto the side of the light body Material: PA Dimensions: 35x30mm Gewicht: 10g Artikel Nr. Bezeichnung 283289 PARASNAP Base right Artikel Nr. Bezeichnung 283291 PARASNAP SNAP-IN2 14 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Battery lights PARASNAP BASE Belt Mount Belt Mount made from genuine leather Additionally needed is SNAP-IN1 (PX0, PX1) or SNAP-IN2 (PX2) Belt loop for belt width up to 55 mm Material: Dimensions: Gewicht: genuine leather and PA 90x70mm 35g Artikel Nr. Bezeichnung 283292 PARASNAP Base Belt Mount Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 15

Battery lights MITYLITE 1965Z0 LED 3315Z0 LED When you need the latest and brightest LED technology in a compact form factor, choose the new MITYLITE1965Z0 LED. Small enough to fit in your shirt pocket, yet bright enough to illuminate your work area. Long lasting, energy efficient, bright LEDs, along with a compact package make the MITYLITE1965Z0 LED the safety approved light for the job. Rotary switch on lamp head ATEX approved Spring clip allows the light to be easily attached IECEx- II 1 GD Ex ia IIC T4 Ga iad 20 IP65 T90 C Da TRAC10ATEX11241X IECEx TRC10.0005X II 1 GD Ex ia IIC T4 Ga Ex iad 20 IP65 T90 Explosion zone : 0/20 Housing: ABS (neonyellow) Light source: LED Light duration: ca. 4h Light range: ca. 50m Batteries: 2xAAA Alkaline Weight incl. batteries: 90g Length: 139mm The 3315Z0 LED light: the lightweight compact design houses 3AA batteries that power a single LED for 110 lumens of super bright LED light. Safety approved for the most volatile work environments ATEX Cat. 1 (Zone 0), the 3315Z0 LED light is one of the most efficient torches on the market today. Pressure switch at the lamp head Compact light with huge LED performance. ATEX approved Housing made from Anti Static ABS Light is resistant to corrosion and extreme temperatures Submersible Explosion zone: 0/20 Light source: LED Light duration: ca. 19h Light range: ca. 160m Batteries: 3xAA Alkaline Weight incl. batteries: 130g Length: 156mm II 1 G Ex ia IIC T4 Ga II 1 D Ex ia IIIC T130 C Da TRAC13ATEX0009X Article No. Designation 283367 Battery light MITYLITE 1965Z0 LED, Zone 0/20 inkl. batteries Article No. Designation 283369 Battery light 3315Z0 LED, Zone 0/20 inkl. batteries 16 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Battery lights HEADS UP LITE 2755Z0 LED Battery head and helmet light HEADS UP LITE 2690Z0/20 LED Battery head and helmet light Bright, compact headlight for harsh conditions - the high output 2755Z0 LED Headlight provides up to 72 lumens of illumination, flashing, and low light modes. Designed with weather resistant casings which also allows for fast and easy battery change. Secure fastening and excellent wearing comfort thanks to adjustable textile head band Housing made from shock-resistant and chemical-resistant ABS Non-permeable to water ATEX approved Angled profile head button is failsafe and easy to operate, even with large gloves on II 1 G Ex ia IIC T4 Ga TRAC13ATEX0035X Explosion zone: 0 Light source: LED Light duration: ca. 6h (hoch) ca. 15h (niedrig) Light range: ca. 60m Batteries: 3xAAA Alkaline Weight incl. batteries: 100g Length: 57mm This Battery head and helmet light is brighter, more efficient, compact and lighter than other headlamps in its class. The rotary bezel switch is easy to operate, even when wearing bulky gloves. The 2690Z0/20 is made of impact and chemical resistant ABS and it s water resistant for all-weather use. It comes with an adjustable and comfortable cloth strap, as well as a heavy duty rubber strap that will not slip off your helmet. Secure fastening and excellent wearing comfort thanks to adjustable textile head band Housing made from shock-resistant and chemical-resistant ABS Non-permeable to water ATEX-certified Angled profile head button is failsafe and easy to operate, even with large gloves on II 1 D/G Ex ia IIC T4 Ex iad 20 IP65 T65 C EG type approval certificate: TRL 08 ATEX 11184X Explosion zone: 0/20 Light source: LED Light duration: 10h Batteries: 3xAAA alkaline Weight incl. batteries: 120g Length: 71mm Article No. Designation 283368 head/helmet light HEADS UP LITE 2755Z0 LED Zone 0 inkl. Batteries Article Designation No. 268524 head/helmet light HEADS UP LITE 2690Z0/20 Zone 0/20 incl. batteries Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 17

Practical examples PARALUX PX1 PARALUX PX1 PARALUX PX0 FlashLED-Ex 18 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY

Practical examples FlutLED-Ex 120 E.ON Petershagen coal-fired power station FlutLED-Ex 120 E.ON Petershagen coal-fired power station FlashLED-Ex Telephone +49 2137 105-0 Fax +49 2137 105-230 verkauf@gifas.de www.gifas.de 19

CONTACT US TODAY Technical modifications reserved 05/2015 New products and specialist solutions, along with the latest product catalogue, can be found on our website: www.gifas.de GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY Phone +49 2137 105-0 Fax: +49 2137 105-230 verkauf@gifas.de www.gifas.de