Smart BUS (S-BUS) Home Automation System Simplified Specification I - Introduction: This Document is constructed to assist Consultant and Designer in specifying latest Home Automation Technology Standards (Smart-BUS). II - Why to Specify Smart-BUS Products 1 - Fully Integrated as Plug and Play Solution 2 - Multi Lingual 3 - Easy to Install by any Electrician 4 - Flexible wiring and Expandability 5 - Elegant finishes 6 - Small in Size 7 - High Specs and features 8 - High Protection Level to overcome Human Errors and Environmental Issues 9 - Flexible Voltage and Communication 10 - Open Protocol for Developers and integrators 11 - Long life performance, 12 - Simple Firmware dependant, no Operating Systems, No PC no hanging software, 13 - Distributed inelegance (Many to Many), Eliminating Central Controller Issues 14 - Customize and multi function, that make automation very easy using minimum device Qty. 15 - Auto Addressing and Manual Simple level Configuration without Need for PC Programing 16 - The First automation platform designed putting Servants and Visitors Or Elderly usability as Main Standard and concept 17 - Affordable Equipment Prices, Lowest Installation and Configuration Costs Factors III- Why to Specify and Assign the Job to Smart-BUS Network
18 - The Fastest Growing Brand in the History of Automation and Control Industry 19 - Availability of Products and Support almost in Every Country or Region in the world 20 - Fair Replacement and Warrantee Policy 21 - Intact Dealers and Network Policy that is Satisfying all types and Levels of Support and Keeping the Family Grow Steadily 22 - Good Delivery Status according to World Standards Measure 23 - Periodical Training Programs are offered free to all dealers and Networks to upgrade them and keep them always up to date 24 - One of the Most Dynamic Operation and social Active Technology Company in its industry category 25 - Forums, Online Support, Regional Branches, Distribution Logistical Centers A - BUS Enabled Lighting Control B - BUS Enabled Dimming and Scenes Control C - BUS Enabled DMX and color Control with LED Drivers D - BUS Enabled HVAC E - BUS Enabled Ceiling Fan Speed control F - BUS Enabled Infra Red Emitters network and current sensors. G - BUS Enabled Security Modules and Security Zone Inputs H - BUS Enabled Fixed User Input Devices like: Wall Touch-screens, wall Panels, LCD Panels, IR receivers, and RF Receivers I - BUS Enabled Full range of Sensors and Detectors J - BUS Enabled Music Multi Room Distributed Audio K - BUS Enabled SMS Communication Modules L - BUS Enabled TCP/IP Gateways M - BUS Enabled Power Meters N - BUS Enabled Room Partitioner O - BUS Enabled Curtain Motors, Drapes, and Blinds Motors P - BUS Enabled Door Access Panels Q - BUS Enabled Motor Switch Over Controllers for gates, garages ++ R - BUS Enabled Web Host to enable control from any web or network accessible device S - BUS Enabled I/O Module for valves control and temperature, water tank level, pumps ++ T - BUS Enabled Air-Quality Detector with temp, humidity, and Other gases contents U - BUS Enabled RFID, or Smart Chip readers V - BUS Enabled Third Party Interfaces like: Dali, KNX, RS-232, RS-485, FTP, OPC ++ W- BUS Enabled Logic and Timer Module. X - BUS Enabled Show, Scene and Queue Control Y - System Ability to Stream, Monitor and control Video Contents Z - System Ability to Control Media Lifters and Presentation Switchers AA - System Ability to Monitor Current and Operation Status of Systems BB - System Ability to Operate and Read Long range RFID Tags as far as 20-50 meters CC - System Ability to Connect CCTV cameras, Visitor Video Intercom, and Room to Room intercoms DD - Availability of Hand Held Remote controls EE - Availability of Different Compatible Mobile Tablets, and Touch screen Control Devices FF - Long Range Car RFID Tags and Reader
The Smart Group Has Acquired Several Awards Over the Years from Many Governments, and Judgment Entities in the Field of: Energy, Lighting Control, Home Automation, Lifestyle Concepts, Audio and Video. The Most Recent Awards are: Golden Award and Mark Of Excellence By CEA USA (best Audio Product 2010) Ukraine Smart Building Org. (Best Smart Product In Ukraine Award 2010) PALME INSTALL., UAE (Best Home Automation Installers and Best Lighting System 2010) Clipsal Australia - (Outstanding Performance Smart Solutions UAE) Techno Lifestyle GmbH Germany 2011 CityScape Intelligent Building Committee (UAE) ISO & OHSAS HAS CERTIFIED SMART-GROUP Smart-Group has Implemented Highest management Standards at its manufacturing Facilities as Well as Administrational and Operational Structure Our management system is ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007 certified The SmartHome Group Is Certified According to the following Standards:
Summary of ISO 9001:2008 We are ISO 9001-2008 Quality Management Certified. The quality policy is a formal statement from management, closely linked to the business and marketing plan and to customer needs. The quality policy is understood and followed at all levels and by all employees. Each employee works towards measurable objectives. The business makes decisions about the quality system based on recorded data. The quality system is regularly audited and evaluated for conformance and effectiveness. Records show how and where raw materials and products were processed, to allow products and problems to be traced to the source. The business determines customer requirements. The business has created systems for communicating with customers about product information, inquiries, contracts, orders, feedback and complaints. When developing new products, the business plans the stages of development, with appropriate testing at each stage. It tests and documents whether the product meets design requirements, regulatory requirements and user needs. The business regularly reviews performance through internal audits and meetings. The business determines whether the quality system is working and what improvements can be made. It has a documented procedure for internal audits. The business deals with past problems and potential problems. It keeps records of these activities and the resulting decisions, and monitors their effectiveness. The business has documented procedures for dealing with actual and potential nonconformances (problems involving suppliers or customers, or internal problems). The business (1) makes sure no one uses bad product, (2) determines what to do with bad product, (3) deals with the root cause of problems, and (4) keep records to use as a tool to improve the system. We are ISO 14001-2004 Environmental management (Green) Certified The ISO 14000 environmental management standards exist to help and Teach our organization how to (a) Minimize how operations (processes etc.) negatively affect the environment (i.e. cause adverse changes to air, water, or land); (b) Comply with applicable laws, regulations, and other environmentally oriented requirements, (c) Continually improve in the above.
We are OHSAS 18001-2007 Occupational Health and Safety Zone Certified The OHSAS certification is applied to Smart-Group to assist to: Establish an OH&S management system to eliminate or minimize risk to employees and other interested parties who may be exposed to OH&S risks associated with its activities Assure conformance with the stated OH&S policy Demonstrate such conformance to others Implement, maintain and continually improve an OH&S management system Make a self-determination and declaration of conformance with this OHSAS specification. Our management system is ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007 certified ISO 14001:2004 ISO 9001:2008 OHSAS 18001:2007 SMART-BUS CE MARK CERTIFICATE What is CE Marking (CE Mark)? CE Marking is the symbol as shown on the top of this page. The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literaturely means "European Conformity". The term initially used was "EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used in all EU official documents. "CE Mark" is also in use, but it is NOT the official term. 1. CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislations, in practice by many of the so-called Product Directives.*
*Product Directives contains the "essential requirements" and/or "performance levels" and "Harmonized Standards" to which the products must conform. Harmonized Standards are the technical specifications (European Standards or Harmonization Documents) which are established by several European standards agencies (CEN, CENELEC, etc). CEN stands for European Committee for Standardization. CENELEC stands for European Committee for Electrotechnical Standardization. 2. CE Marking on a product indicates to governmental officials that the product may be legally placed on the market in their country. 3. CE Marking on a product ensures the free movement of the product within the EFTA & European Union (EU) single market (total 30 countries), and 4. CE Marking on a product permits the withdrawal of the non-conforming products by customs and enforcement/vigilance authorities. Climate Control (EMF) Communication & Integration Control (EMF) Lighting & Dimming (EMF) Relays (EMF) Room Controls (EMF) Lighting & Dimming (Low Voltage)
Relays (Low Voltage) EMC Lab Test Reports SMART-BUS RoHS COMPLIANT CERTIFICATE RoHS Compliance Definition The definition and aim of the RoHS directive is quite simple. The RoHS directive aims to restrict certain dangerous substances commonly used in electronic and electronic equipment. Any RoHS compliant component is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than
0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance. Climate Control Integration and Control System Lighting & Dimming Controls Relay Controllers Room Management Controls ROHS LAB TEST REPORTS Climate Control Integration and Control Lighting and Dimming
Systems Controls Relay Controllers Room Management Controls SMART-BUS UL CERTIFICATIONS Underwriters Laboratories Inc. (UL) is an independent product safety certification organization. Established in 1894, the company has its headquarters in Northbrook, Illinois. UL develops standards and test procedures for products, materials, components, assemblies, tools and equipment, chiefly dealing with product safety. UL also evaluates and certifies the efficiency of a company's business processes through its management system registration programs. Additionally, UL analyzes drinking and other clean water samples through its drinking water laboratory in South Bend, Indiana and evaluates products for environmental sustainability through its subsidiary, UL Environment. There are many types of UL Marks, each with its own specific meaning. The only way to determine if a product has been certified by Underwriters Laboratories is to look for the UL Mark on the product itself. In a few instances, the UL Mark may be present only on the packaging of a product. Some products certified by UL are components that are intended to be used in the manufacture of a complete Listed product. These components cannot bear the UL symbol, but may use a special Recognized Component Mark. The UL Mark on a product means that UL has tested and evaluated representative samples of that product and determined that they meet UL requirements. Under a variety of programs products are periodically checked by UL at the manufacturing facility to make sure they continue to meet UL requirements. The UL Marks may be only used on or in connection with products certified by UL and under the terms of written agreement with UL. In addition to these marks, UL also provides access to the marks required in a number of other key world markets.
REFERENCE: http://www.ul.com SMART-BUS SOUTH AFRICAN BUREAU OF STANDARDS SABS SABS is a statutory body that was established in terms of the Standards Act, 1945 (Act No. 24 of 1945) and continues to operate in terms of the latest edition of the Standards Act, 2008 (Act No. 29 of 2008) as the national institution for the promotion and maintenance of standardization and quality in connection with commodities and the rendering of services. SABS publishes national standards which it prepares through a onsensus process in technical committees, provides information on national standards of all countries as well as international standards SABS tests and certifies products and services to standards SABS develops technical regulations (compulsory specifications) based on national standards, monitors and enforces compliance with such technical regulations SABS monitors and enforces legal metrology legislation SABS promotes design excellence SABS provides training on aspects of standardization. With a view to maximising its service delivery to the industries it serves, SABS recently aligned its activities with seven different industry sectors, each housing the whole range of SABS services pertinent to a particular industry. This change ensures easy access to products, faster reaction and turn-around times, and the creation of centres of knowledge excellence that will be easily available to clients. The seven industry sectors are: Chemicals Electrotechnical Food and Health Mechanical and Materials Mining and Minerals Services Transportation REFERENCE: https://www.sabs.co.za/