Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11149-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2014-10-02 to 2018-11-28 Holder of certificate: VdS Schadenverhütung GmbH Amsterdamer Straße 174, D-50735 Cologne Tests in the fields: fire detection and fire alarm systems, intruder alarm systems, transmission systems, dyeing systems for paper money, access control systems, water extinguishing systems, hydrant systems, gas extinguishing systems, smoke and heat exhaust ventilation systems, burglary-resistant façade elements, incl. locks and fittings, attack-blocking glazing, products of the industry for safes and strongrooms, incl. locks to protect against burglary, as well as electromagnetic compatibility (EMC) and environmental simulation The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. Fire detection and fire alarm systems DIN EN 54, Part 5 +A1 : 2002-09 VdS 2503 : 1996-12 ISO 7240-5 + TC1 : 2005 DIN EN 54, Part 7 : 2006-09 VdS 2504 : 1996-12 ISO 7240-7 : 2011 Heat detectors Smoke detectors This document is a translation. The definitive is the original German annex to the accreditation certificate. 1/35
CEA 4022 : 1999-12 DIN EN 54, Part 20 : 2009-12 ISO 7240-20 : 2010 CEA 4021 pren 54-29 : 2009-10 DIN EN 54, Part 18 +AC : 2007-05 ISO 7240-18 : 2009 ISO 12239 : 2010-12 DIN EN 14604 : 2009-02 VdS 3515 : 2007-06 VdS 3131 : 2010-05 DIN EN 54, Part 2 +A1 : 2007-01 VdS 2540 : 2010-12 ISO 7240-2 : 2003 DIN EN 54, Part 16 : 2008-06 ISO 7240-16 : 2007 DIN EN 54, Part 3 : 2006-08 ISO 7240-3 : 2010 DIN EN 54, Part 23 : 2010-06 ISO 7240-23 : 2011 (DIS) DIN VDE 0833, Part 1 : 2009-09 Aspirating smoke detectors Multi-sensor fire detectors - point detectors using a combination of smoke and heat sensors In-/output devices for transmission paths Smoke alarm devices Control and indicating equipment Voice alarm control and indicating equipment Fire alarm devices Sounders Visual alarm devices Alarm systems for fire, intrusion and hold-up Period of validity: 2014-10-02 to 2018-11-28 - Translation - 2/35
Part 2 +Ber1 : 2010-05 Part 4 : 2011-07 DIN 14675 : 2012-04 DIN EN 54, Part 4 +A1/A2 : 2007-01 VdS 2541 : 1996-12 ISO 7240-4 : 2003 DIN EN 54, Part 10 +A1 : 2006-03 ISO 7240-10 : 2012 DIN EN 54, Part 11 +A1 : 2006-03 DIN 14678 : 2008-08 ISO 7240-11 : 2011 DIN EN 54, Part 12 : 2003-03 ISO 7240-12 : 2006 DIN EN 54, Part 13 : 2005-08 VdS 2489 : 1996-12 ISO 7240-13 : 2005 DIN EN 54, Part 17 : 2006-03 ISO 7240-17 : 2009 DIN 14661 : 2011-02 VdS 2542 : 1996-12 DIN 14662 : 2011-11 Fire detection and fire alarm systems Power supply equipment Flame detectors Manual call points Smoke detectors - Line detectors using an optical beam Fire detection and fire alarm systems - Compatibility assessment of system components Short-circuit isolators Fire-brigade control panel for fire detection and fire alarm systems Fire-brigade indication panel for fire detection and fire alarm systems Period of validity: 2014-10-02 to 2018-11-28 - Translation - 3/35
pren 54-22 : 2011-03 DIN EN 54, Part 24 : 2008-06 ISO 7240-24 : 2010 DIN EN 54, Part 25 : 2009-02 VdS 3448 : 2009-10 (E) ISO 7240-25 : 2010 pren 54-27 : 2008-09 Bau- und Prüfgrundsätze des DIBt : 1976-12 ISO 10294-4 : 2001-04 pren 54-28 : 2011-04 DIN EN 54, Part 21 : 2006-08 ISO 7240-21 : 2005 pren 54-29 : 2009-10 VdS 3157 : 2011-03 (E) VdS 3156 : 2012-12 Resettable line type heat detectors Loudspeakers Components using radio links Duct smoke detectors Non-resettable line type heat detectors Alarm transmission and fault warning routing equipment Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors dealing with an increased immunity to electromagnetic interference dealing with electrical control devices for oxygen reduction systems Hold-open systems DIN EN 1154 +Ber1 : 2006-06 DIN 18263-4 : 1997-05 DIN EN 1155 +Ber1 : 2006-06 Controlled door closing devices Electrically powered hold-open devices for swing doors Period of validity: 2014-10-02 to 2018-11-28 - Translation - 4/35
DIN EN 14637 : 2008-01 DIBt-Richtlinien für Feststellanlagen : 1988-10 DIN VDE 0833, Part 1 : 2009-09 DIN VDE 0833, Part 3 : 2009-09 EN 50131-1 +A1 : 2009 DIN EN 50131-1 (VDE 0830-2-1) : 2010-02 IEC 62642-1 : 2010 pren 50131-9 : 2010 E DIN EN 50131-9 (E VDE 0830-2-9) : 2010-06 CLC/TS 50398 : 2009 DIN CLC/TS 50398 (VDE V 0830-6-398) : 2010-04 CLC/TS 50131-7 : 2010 E DIN CLC/TS 50131-7 (E VDE V 0830-2-7) : 2011-06 VdS 2227 : 2002-05 VdS 2115 : 2002-09 VdS 2122 : 2008-02 VdS 2195 : 2001-04 VdS 2197 : 2005-10 Electrically controlled hold-open systems for fire/smoke door assemblies Intruder alarm systems and hold-up alarm systems Alarm systems for fire, intrusion and hold-up Alarm systems - Intrusion and hold-up systems - Part 1: System requirements Alarm systems - Intrusion and hold-up systems - Part 9: Alarm verification - Methods and principles Alarm systems - Combined and integrated alarm systems - General requirements Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines General requirements dealing with class BIC power supply units, requirements dealing with class BIC power supply units, test methods Class A Power Supply Units for Intruder Alarm Systems, Requirements dealing with class A power supply units, requirements Period of validity: 2014-10-02 to 2018-11-28 - Translation - 5/35
VdS 2194 : 1999-10 VdS 2252 : 2003-02 VdS 2102 : 2001-07 VdS 2119 : 2003-12 VdS 2116 : 2008-06 VdS 2166 : 2008-06 VdS 2117 : 2002-03 VdS 2477 : 2009-10 VdS 2264 : 2008-08 VdS 2120 : 1996-03 DIN EN 50131-2-6 : 2009-05 VdS 2233 : 1996-03 VdS 2270 : 2002-03 VdS 2317 : 2002-07 VdS 2269 : 1996-09 VdS 2315 : 1996-09 VdS 2271 : 2007-12 VdS 2314 : 1996-03 VdS 2300 : 2001-07 VdS 2329 : 2001-12 dealing with control and indicating equipment of class A, requirements Control and Indicating Equipment (CIE) of classes B and C, Requirements Maintenance-free Lead Acid Batteries for Alarm Systems, Requirements and Test Methods Ancillary control equipment (ACE), Requirements Junction Boxes, Requirements dealing with junction boxes, tests Infrared Light Beams, Requirements dealing with surface surveillance, requirements dealing with IAS monitoring measures for safes and strongrooms Opening Detectors, Requirements dealing with opening detectors, tests Alarm Glasses for Intruder Alarm Systems, Requirements dealing with alarm glasses, tests Stroke Plate Contacts, Requirements [sic] dealing with strike plate contacts, tests Hold-up Trigger Devices for Intruder Alarm Systems, Requirements dealing with hold-up trigger devices, requirements Audible Warning Devices for External Alarm for Intruder Alarm Systems, Requirements dealing with audible warning devices, tests Period of validity: 2014-10-02 to 2018-11-28 - Translation - 6/35
VdS 2301 : 2001-07 VdS 2330 : 2001-12 VdS 2332 : 2002-04 VdS 2312 : 2010-12 VdS 2326 : 2001-12 VdS 2331 : 1999-12 VdS 2105 : 2005-11 VdS 2468 : 2004-11 VdS 2469 : 1994-06 VdS 2480 : 2007-05 VdS 2482 : 1998-01 VdS 2485 : 2004-02 E VdS 2525 : 1998-03 VdS 3112 : 2009-07 VdS 3438 : 2010-02 DIN V VDE V 0826-1 : 2005-06 EN 50131-2-2 : 2008 DIN EN 50131-2-2 (VDE 0830-2-2-2) : 2008-09 IEC 62624-2-2 : 2010 Visual Warning Devices for External Alarm For Intruder Alarm Systems, Requirements dealing with visual warning devices, tests Glass Break Detectors for Intruder Alarm Systems, Requirements Motion Detectors for Intruder Alarm Systems, Requirements and Test Methods dealing with motion detectors, test methods dealing with seismic detectors, requirements dealing with key depots, requirements for system components dealing with glass break detectors, tests dealing with intruder alarm systems, requirements and test methods Vibration detectors, Requirements Capacitive Proximity Detectors, Requirements dealing with light barriers, tests dealing with smoke-generating devices, requirements Biometric recognition procedures dealing with home risk management systems Surveillance systems - Part 1: Hazard warning system Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors Period of validity: 2014-10-02 to 2018-11-28 - Translation - 7/35
EN 50131-2-3 : 2008 DIN EN 50131-2-3 (VDE 0830-2-2-3) : 2009-05 EN 50131-2-4 : 2008 DIN EN 50131-2-4 (VDE 0830-2-2-4) : 2008-10 EN 50131-2-5 : 2008 DIN EN 50131-2-5 (VDE 0830-2-2-5) : 2009-05 EN 50131-2-6 : 2008 DIN EN 50131-2-6 (VDE 0830-2-2-6) : 2009-05 CLC/TS 50131-2-7-1 : 2009 DIN CLC/TS 50131-2- 7-1 (VDE V 0830-2-2-7-1) : 2010-04 CLC/TS 50131-2-7-2 : 2009 DIN CLC/TS 50131-2- 7-2 (VDE V 0830-2-2-7-2) : 2010-04 CLC/TS 50131-2-7-3 : 2009 DIN CLC/TS 50131-2- 7-3 (VDE V 0830-2-2-7-3) : 2010-04 Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors Alarm systems Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) Alarm systems Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors Glass break detectors (passive) Alarm systems Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors Glass break detectors (active) Period of validity: 2014-10-02 to 2018-11-28 - Translation - 8/35
EN 50131-3 : 2009 DIN EN 50131-3 (VDE 0830-2-3) : 2010-02 IEC 62642-3 : 2010 EN 50131-4 : 2009 DIN EN 50131-4 (VDE 0830-2-4) : 2010-02 IEC 62642-4 : 2010 EN 50131-5-3 +A1 : 2008 DIN EN 50131-5-3 (VDE 0830-2-5-3) : 2009-06 IEC 62642-5-3 : 2010 EN 50131-6 : 2008 DIN EN 50131-6 (VDE 0830-2-6) : 2008-10 IEC 62642-6 : 2011 EN 50131-8 : 2009 DIN EN 50131-8 (VDE 0830-2-8) : 2010-03 FprTS 50131-5-4 : 2012 FprTS 50131-2-8 : 2011 Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems Intrusion and Hold-up Alarm Systems, Part 5-4: System compatibility testing for I & HAS systems Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors Video surveillance systems VdS 2364 : 2006-08 dealing with video surveillance systems, category I Period of validity: 2014-10-02 to 2018-11-28 - Translation - 9/35
VdS 2365 : 2008-10 dealing with video surveillance systems, category II Social alarm systems EN 50134-1 : 2002 DIN EN 50134-1 (VDE 0830-4-1) : 2003-05 EN 50134-2 : 1999 DIN EN 50134-2 (VDE 0830-4-2) : 2000-01 EN 50134-3 : 2001 DIN EN 50134-3 (VDE 0830-4-3) : 2002-12 EN 50134-5 : 2004 DIN EN 50134-5 (VDE 0830-4-5) : 2005-08 Alarm Systems - Social Alarm Systems - Part 1: System Requirements Alarm systems - Social alarm systems - Part 2: Trigger devices Alarm systems - Social alarm systems - Part 3: Local unit and controller Alarm systems - Social alarm systems - Part 5: Interconnections and communications Access control systems VdS 2358 : 2009-10 VdS 2359 : 2009-10 EN 50133-1 +A1 : 2002 DIN EN 50133-1 (VDE 0830 Part 8-1) : 2003-09 EN 50133-2-1 : 2000 DIN EN 50133-2-1 (VDE 0830-8-2-1) : 2001-08 dealing with access control systems, requirements dealing with access control systems, tests Alarm systems - Access control systems for use in security applications - Part 1: System requirements Alarm systems - Access control systems for use in security applications Part 2-1: General requirements for components Period of validity: 2014-10-02 to 2018-11-28 - Translation - 10/35
Alarm transmission systems pr EN 50136-1 : 2010 VdS 2227 : 2002-05 VdS 2463 : 1995-05 VdS 2465 +S1/S2/S3 : 2008-10 VdS 2466 : 1996-04 VdS 2471 : 2010-05 pr EN 50131-10 : 2010 DIN EN 50131-10 (VDE 0830-2-10) : 2011-05 DIN EN 50136-2-1 : 2002-09 DIN EN 50136-2-2 : 2000-04 DIN EN 50136-2-3 : 2000-04 DIN EN 50136-2-4 : 2000-04 CLC/TS 50136-4 : 2004 Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems General requirements Alarm Transmission Equipment for alarm signals (ATE), Requirements Transmission protocol for Alarm signals/messages dealing with alarm receiving equipment for alarm signals, Part 1: Requirements dealing with transmission paths in alarm transmitters Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT) Alarm systems - Alarm transmission systems and equipment - Part 2-1: General requirements for alarm transmission equipment Alarm Systems - Alarm Transmission Systems And Equipment - Part 2-2: Requirements For Equipment Used In Systems Using Dedicated Alarm Paths Alarm systems - Alarm transmission systems and equipment - Part 2-3: Requirements for equipment used in systems with digital communicators using the public switched telephone network Alarm systems - Alarm transmission systems and equipment - Part 2-4: Requirements for equipment used in systems with voice communicators using the public switched telephone network Alarm systems - Alarm transmission systems and equipment - Part 4: Annunciation equipment used in alarm receiving centres Period of validity: 2014-10-02 to 2018-11-28 - Translation - 11/35
EN 50136-1-5 : 2008 DIN EN 50136-1-5 (VDE 0830-5-1-5) : 2008-10 CLC/TS 50136-4 : 2004 DIN CLC/TS 50136-4 (VDE V 0830-5-4) : 2005-07 pr EN 50136-1-7 : 2007 E DIN EN 50136-1-7 (VDE 0830-5-1-7) : 2010-05 VdS 2538 : 2000-10 Alarm systems - Alarm transmission systems and equipment - Part 1-5: Requirements for Packet Switched Network PSN Alarm systems - Alarm transmission systems and equipment - Part 4: Annunciation equipment used in alarm receiving centres Alarm systems - Alarm transmission systems and equipment - Part 1-7: Requirements for common protocol for alarm transmission using packet switched network Dyeing systems for paper money dealing with guidelines for dyeing systems for paper money Products for water extinguishing systems and hydrant systems VdS 2100-01 : 2011-05 EN 12259-2 +A1/A2 : 2006 ISO 6182-2 : 2005 VdS 2100-02 : 2011-05 EN 12259-3 +A1/A2 : 2006 ISO 6182-3 : 2005 VdS 2100-02 : 2011-05 EN 12259-3 +A1/A2 : 2006 ISO 6182-4 : 1993 VdS 2100-12 : 2011-05 VdS 2100-13 : 2011-05 Wet alarm valve stations Dry alarm valve stations Dry alarm valve stations with and without accelerator Pre-action alarm valve stations type B (quick dry alarm valve stations) Pre-action alarm valve stations type A Period of validity: 2014-10-02 to 2018-11-28 - Translation - 12/35
VdS 2100-15 : 2011-05 VdS 2100-23 : 1988-05 pren 12259-9 : 2012-02 ISO 6182-5 : 2006 VdS 2100-08 : 2011-05 DIN EN 1074-1 : 2000-07 DIN EN 1074-2 : 2004-07 VdS 2100-09 : 2011-05 DIN EN 13959 : 2005-01 VdS 2100-19 : 1986-07 DIN 1988-600 : 2010-12 VdS 2100-29 : 2012-04 VdS 2100-14 : 2008-07 VdS 2100-03 : 1981-01 EN 12259-3 +A1/A2 : 2006 ISO 6182-4 : 1993 VdS 2100-05 : 1981-01 EN 12259-5 : 2002 DIN 14463-1 : 2007-1 DIN 14463-2 Tail-end valve stations dealing with water spray valve stations Shut-off valves Non-return valves dealing with feed valves Flow measuring devices for use in test pipes dealing with strainers dealing with accelerators / relief valves dealing with flow detectors Water systems for fire extinguishing - Filling and draining devices operated by remote control Period of validity: 2014-10-02 to 2018-11-28 - Translation - 13/35
DIN 3266 : 2009-05 DIN 14464 : 2012-09 VdS 2100-18 : 1986-07 VdS 2100-25 : 2008-01 VdS 2100-28 : 2011-05 VdS 2498 : 1997-11 EN 12259-1 +A1/A2/A3 : 2006 ISO 6182-1 : 2004 ISO 6182-9 : 2005 CEA 4023 : 1999-12 CEA 4043 : 2004-05 DIN EN 13565-1 : 2008-01 IMO Res A.800 : 1995-12 IMO Res MSC.265 : 2008-05 IMO MSC/Circ. 1165 : 2005-06 VdS 2100-04 : 1981-01 EN 12259-4 +A1 : 2001 ISO 6182-2 : 2005 VdS 2100-20 : 1986-07 VdS 2100-07 : 2013-03 pren 12259-12 : 2012-05 dealing with safety group / separating station dealing with sprinklers and nozzles dealing with alarm bells dealing with pressure switches Sprinkler Pumps Period of validity: 2014-10-02 to 2018-11-28 - Translation - 14/35
VdS 2100-06 : 2004-01 VdS 2100-24 : 1988-05 VdS 2100-26 : 2012-04 VdS 2100-30 : 2011-05 VdS 2100-11 : 1982-04 VdS 2100-6 : 1981-01 VdS 2100-31 : 2011-11 VdS CEA 4033 : 2007-10 VdS 2518 : 2008-08 VdS 2455 : 1999-01 VdS 3423 : 2000-11 VdS 2160 : 2000-05 DIN EN 13565-1 : 2008-01 CEA GEI 3 2009/03 : 2009-01 DIN EN 13565-1 : 2008-01 DIN EN 13565-1 : 2008-01 VdS 2100-21 : 2008-11 VdS 2100-22 : 2008-11 VdS 3158 : 2011-08 Pipe Joints dealing with special fittings Metal Pressfitting Pipe Systems Fittings dealing with sprinkler escutcheons dealing with pipe supports Waterbased spark extinguishing devices in ducts Spark Extinguishing Systems dealing with spark separation systems dealing with E-90 cable with additional circuit integrity maintenance under exposure to water dealing with glass bulb release elements dealing with proportioners dealing with foam generators dealing with foam pipes Controllers for Electric Motors Controllers for Diesel Motors dealing with covering fabric for short-term use under sprinklers and nozzles Period of validity: 2014-10-02 to 2018-11-28 - Translation - 15/35
EN 671-1 : 2012 EN 671-2 : 2012 EN 14384 : 2005 DIN 14461-3 2006-06 VdS 2454 : 2011-05 CEA 4029 VdS CEA 4011 CEA 4011 DIN EN 12094-2 : 2003-09 VdS CEA 4009 CEA 4009 DIN EN 12094-5 2006-07 VdS CEA 4009 CEA 4009 DIN EN 12094-5 2006-07 VdS CEA 4014 CEA 4014 DIN EN 12094-4 : 2004-10 dealing with hose systems Pillar fire hydrants dealing with fire hose valves Products for gas extinguishing systems dealing with equipment for CO2 fire extinguishing systems dealing with non-electrical control and delay devices for CO2 fire extinguishing systems dealing with CO2 low pressure selector valves and their actuators dealing with CO2 high pressure selector valves and their actuators dealing with CO2 high pressure container valve assemblies, accessories, and their actuators Period of validity: 2014-10-02 to 2018-11-28 - Translation - 16/35
VdS CEA 4010 : 1997-07 CEA 4010 DIN EN 12094-7 : 2005-04 VdS CEA 4028 CEA 4028 DIN EN 12094-12 VdS CEA 4027 CEA 4027 DIN EN 12094-11 VdS 2578 : 2001-03 VdS 2238 : 1989-03 DIN EN 12094-9 VdS CEA 4032 CEA 4032 DIN EN 12094-6 : 2006-07 VdS CEA 4030 CEA 4030 DIN EN 12094-10 : 2003-09 VdS CEA 4026 CEA 4026 DIN EN 12094-10 : 2003-09 dealing with nozzles for CO2 systems dealing with pneumatic alarm devices for CO2 fire extinguishing systems dealing with mechanical weighing devices for CO2 fire extinguishing systems dealing with electromechanical weighing devices for CO2 low-pressure vessels dealing with fire detection elements for CO2 fire extinguishing systems dealing with non-electrical disable devices for CO2 fire extinguishing systems dealing with pressure gauges for CO2 fire extinguishing systems dealing with pressure switches for CO2 fire extinguishing systems Period of validity: 2014-10-02 to 2018-11-28 - Translation - 17/35
CEA 4031 DIN EN 12094-3 VdS CEA 4012 CEA 4012 DIN EN 12094-13 +Ber1 : 2002-06 VdS CEA 4013 CEA 4013 DIN EN 12094-8 : 2006-07 VdS 2454 : 2011-05 CEA 4029 VdS CEA 4011 CEA 4011 DIN EN 12094-2 : 2003-09 VdS CEA 4009 CEA 4009 DIN EN 12094-5 2006-07 VdS CEA 4014 CEA 4014 DIN EN 12094-4 : 2004-10 VdS CEA 4016 : 1997-07 CEA 4016 dealing with manual triggering and stop devices for CO2 fire extinguishing systems dealing with check valves and non-return valves for CO2 fire extinguishing systems dealing with hoses and container connecting pipes for CO2 fire extinguishing systems dealing with systems for inert gas extinguishing systems dealing with non-electrical automatic control and delay devices for inert gas extinguishing systems dealing with inert gas selector valves and their actuators dealing with inert gas container valve assemblies, accessories, and their actuators dealing with inert gas nozzles Period of validity: 2014-10-02 to 2018-11-28 - Translation - 18/35
VdS CEA 4028 CEA 4028 DIN EN 12094-12 VdS CEA 4027 CEA 4027 DIN EN 12094-11 DIN EN 12094-9 VdS CEA 4032 CEA 4032 DIN EN 12094-6 : 2006-07 VdS CEA 4030 CEA 4030 DIN EN 12094-10 : 2003-09 VdS CEA 4026 CEA 4026 DIN EN 12094-10 : 2003-09 CEA 4031 DIN EN 12094-3 VdS CEA 4012 CEA 4012 DIN EN 12094-13 +Ber1 : 2002-06 dealing with pneumatic alarm devices for inert gas extinguishing systems dealing with mechanical weighing devices for inert gas extinguishing systems dealing with fire detection elements for inert gas extinguishing systems dealing with non-electrical disable devices for inert gas extinguishing systems dealing with pressure gauges for inert gas extinguishing systems dealing with pressure switches for inert gas extinguishing systems dealing with manual triggering and stop devices for inert gas extinguishing systems dealing with check valves and non-return valves for inert gas extinguishing systems Period of validity: 2014-10-02 to 2018-11-28 - Translation - 19/35
VdS CEA 4013 CEA 4013 DIN EN 12094-8 : 2006-07 VdS CEA 4025 CEA 4025 VdS 2093 : 2009-06 CEA 4007 : 2003-09 ISO 6183 : 2009-09 NFPA 12 : 2011 VdS 2380 : 2009-06 CEA 4008 : 2005-04 ISO 14520 : 2005/2006 NFPA 2001 : 2012 VdS 2381 : 2009-06 CEA 4045 : 2005-04 ISO 14520 : 2005/2006 NFPA 2001 : 2012 VdS 2496 : 2012-03 VdS 3518 : 2006-07 VdS 2454 : 2011-05 CEA 4029 dealing with hoses and container connecting pipes for inert gas extinguishing systems dealing with pressure reduction devices for inert gas extinguishing systems CO2 Fire Extinguishing Systems, Planning and Installation Fire Extinguishing Systems using non-liquefied Inert Gases, Planning and Installation Fire Extinguishing Systems using Halocarbon Gases, Planning and Installation VdS Guidelines for the Triggering of Fire Extinguishing Systems, Planning and Installation Guidelines for Safety and Health Protection in Connection with Gas Extinguishing Systems dealing with fire extinguishing systems using halocarbon gases Period of validity: 2014-10-02 to 2018-11-28 - Translation - 20/35
VdS CEA 4011 CEA 4011 DIN EN 12094-2 : 2003-09 VdS CEA 4009 CEA 4009 DIN EN 12094-5 2006-07 VdS CEA 4014 CEA 4014 DIN EN 12094-4 : 2004-10 VdS CEA 4028 CEA 4028 DIN EN 12094-12 VdS CEA 4027 CEA 4027 DIN EN 12094-11 DIN EN 12094-9 VdS CEA 4032 CEA 4032 DIN EN 12094-6 : 2006-07 dealing with non-electrical control devices for fire extinguishing systems using halocarbon gases dealing with selector valves and their actuators for fire extinguishing systems using halocarbon gases dealing with container valve assemblies, accessories, and their actuators for fire extinguishing systems using halocarbon gases dealing with pneumatic alarm devices for fire extinguishing systems using halocarbon gases dealing with mechanical weighing devices for fire extinguishing systems using halocarbon gases dealing with fire detection elements for fire extinguishing systems using halocarbon gases dealing with non-electrical disable devices for fire extinguishing systems using halocarbon gases Period of validity: 2014-10-02 to 2018-11-28 - Translation - 21/35
VdS CEA 4030 CEA 4030 DIN EN 12094-10 : 2003-09 VdS CEA 4026 CEA 4026 DIN EN 12094-10 : 2003-09 CEA 4031 DIN EN 12094-3 VdS CEA 4012 CEA 4012 DIN EN 12094-13 +Ber1 : 2002-06 VdS CEA 4013 CEA 4013 DIN EN 12094-8 : 2006-07 DIN EN 12094-1 +Ber1 : 2006-09 DIN EN 12094-1 +Ber1 : 2006-09 DIN EN 12094-1 +Ber1 : 2006-09 CEA 4031 DIN EN 12094-3 dealing with pressure gauges for fire extinguishing systems using halocarbon gases dealing with pressure switches for fire extinguishing systems using halocarbon gases dealing with manual triggering and stop devices for fire extinguishing systems using halocarbon gases dealing with check valves and non-return valves for fire extinguishing systems using halocarbon gases dealing with hoses and container connecting pipes for fire extinguishing systems using halocarbon gases dealing with electrical control devices for CO2 fire extinguishing systems dealing with electrical control devices for inert gas extinguishing systems dealing with electrical control devices for fire extinguishing systems using halocarbon gases dealing with electrical hand-operated signalling devices for CO2 fire extinguishing systems Period of validity: 2014-10-02 to 2018-11-28 - Translation - 22/35
CEA 4031 DIN EN 12094-3 CEA 4031 DIN EN 12094-3 CEA 4031 DIN EN 12094-3 CEA 4031 DIN EN 12094-3 CEA 4031 DIN EN 12094-3 VdS CEA 4028 CEA 4028 VdS CEA 4028 CEA 4028 VdS CEA 4028 CEA 4028 VdS 2594 : 2010-01 VdS 2159 : 2005-02 DIN EN 12101-2 : 2003-09 ISO 21927-2 +A1 : 2010-06 dealing with electrical hand-operated signalling devices for inert gas extinguishing systems dealing with electrical hand-operated signalling devices for fire extinguishing systems using halocarbon gases dealing with emergency stop devices for CO2 fire extinguishing systems dealing with emergency stop devices for inert gas extinguishing systems dealing with emergency stop devices for fire extinguishing systems using halocarbon gases dealing with electrical alarm devices for CO2 fire extinguishing systems dealing with electrical alarm devices for inert gas extinguishing systems dealing with electrical alarm devices for fire extinguishing systems using halocarbon gases Products for smoke and heat exhaust ventilation systems dealing with systems for natural SHEVS Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators Period of validity: 2014-10-02 to 2018-11-28 - Translation - 23/35
DIN EN 54-5 +A1 : 2002-09 DIN EN 54-7 : 2006-09 VdS 2584 : 2012-05 pren 12101-9 : 2004-12 ISO 21927-9 : 2012-03 VdS 2583 : 2012-05 DIN V 18232-8 : 2008-07 VdS 2580 : 2012-05 DIN V 18232-8 : 2008-07 VdS 2579 : 2012-05 VdS 2581 : 2002-09 pren 12101-9 : 2004-12 ISO 21927-9 : 2012-03 VdS 2592 : 2002-09 pren 12101-9 : 2004-12 ISO 21927-9 : 2012-03 VdS 2593 : 2002-09 DIN EN 12101-10 +Ber1 : 2009-07 ISO 21927-10 : 2011-07 Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionisation dealing with fire detection and triggering devices for natural SHEVS dealing with pneumatic opening units for natural SHEVS dealing with electromechanical drives of natural SHEVS dealing with locking of natural SHEVS dealing with electrical control devices for natural SHEVS dealing with electrical hand-operated triggering devices for natural SHEVS dealing with power supplies to natural SHEVS Period of validity: 2014-10-02 to 2018-11-28 - Translation - 24/35
VdS 2821 : 2004-03 pren 12101-9 : 2004-12 ISO 21927-9 : 2012-03 VdS 2823 : 2004-03 VdS 2822 : 2004-03 VdS 2824 : 2004-03 DIN EN 12101-10 +Ber1 : 2009-07 ISO 21927-10 : 2011-07 VdS 2825 : 2004-03 VdS 2886 : 2004-05 VdS 2889 : 2004-05 pren 12101-9 : 2004-12 ISO 21927-9 : 2012-03 VdS 2887 : 2004-05 DIN EN 12101-10 +Ber1 : 2009-07 ISO 21927-10 : 2011-07 VdS 2888 : 2004-05 VdS 2890 : 2004-05 dealing with electrical control devices for powered SHEVS dealing with electrical hand-operated triggering devices for powered smoke exhausts dealing with damper actuators for powered smoke exhausts dealing with power pupplies to powered smoke exhausts dealing with systems for powered smoke exhausts dealing with electromechanical damper actuators for exhaust vents for differential pressure systems dealing with electrical control devices for differential pressure systems dealing with power supplies to differential pressure systems dealing with electrical hand-operated triggering devices for differential pressure systems dealing with equipment for differential pressure systems Period of validity: 2014-10-02 to 2018-11-28 - Translation - 25/35
Burglary-resistant façade elements VdS 2534 : 1999-11 DIN EN 1627 : 2011-09 EN 1627 : 2011 DIN EN 1628 : 2011-09 EN 1628 : 2011 DIN EN 1629 : 2011-09 EN 1629 : 2011 DIN EN 1630 : 2011-09 EN 1630 : 2011 E VdS 2534 : 1999-01 VdS 2163 : 1990-05 DIN 52290 Part 1 : 1988-11 DIN 52290 Part 3 : 1984-06 DIN EN 356 EN 356 : 1999 DIN 52290 Part 1 : 1988-11 DIN 52290 Part 4 : 1988-11 DIN EN 356 EN 356 : 1999 dealing with burglary-resistant façade elements, requirements and test methods Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts dealing with burglary-resistant façade elements Attack-blocking glazing dealing with burglary-resistant glazing dealing with pendulum body impact resistant glazing Period of validity: 2014-10-02 to 2018-11-28 - Translation - 26/35
Locks and fittings for burglary-resistant façade elements DIN 18251-1 : 2002-07 DIN 18251-2 : 2002-11 DIN 18251-3 : 2002-11 VdS 2201 : 2004-02 VdS 2215 : 2005-08 DIN EN 12209 +Ber1 : 2006-06 EN 12209 +AC : 2005 DIN 18252 : 2006-12 DIN EN 1303 + Ber1 : 2008-09 EN 1303 +AC : 2008 VdS 2156-1 : 2012-07 VdS 2156-2 +S1 : 2012-04 DIN EN 1906 : 2012-12 EN 1906 : 2012 DIN 18257 : 2003-03 VdS 2113 : 2012-07 VdS 2225 : 2008-01 VdS 2386 : 2012-07 Locks - Mortice locks - Part 1: Mortice locks for rebated doors Locks - Mortise locks - Part 2: Mortise locks for tube frame doors Locks - Mortise locks - Part 3: Mortise locks as multipoint locks dealing with cylinder locks, requirements and test methods dealing with locking systems, requirements and test methods Mechanically operated locks, latches and locking plates - Requirements and test methods Profile cylinders for door locks - Terminology, dimensions, requirements and marking Building hardware - Cylinders for locks - Requirements and test methods Locking Cylinders with Individual Locking Function, Requirements and test methods Locking Cylinders with Individual Locking Function, Part 2: Electronic Locking Cylinders, Requirements and Test Methods Building hardware - Lever handles and knob furniture - Requirements and test methods Building hardware - Security plates - Definitions, measurements, requirements, marking dealing with burglar-resistant door plates - requirements and test methods dealing with burglar-resistant strike plates for mortice locks - requirements and test methods Locking Systems, Requirements and Test Methods Period of validity: 2014-10-02 to 2018-11-28 - Translation - 27/35
VdS 2536 +S1 : 2011-03 DIN 18104-1 : 2012-05 VdS 3101 : 2012-10 VdS 2597 : 2007-10 VdS 3503 : 2012-01 VdS 3528 : 2009-05 VdS 3541 : 2012-07 E VdS 3546 : 2010-06 E VdS 3163 : 2012-10 dealing with upgrade products - requirements and test methods Mechanical security equipment, Requirements and test methods dealing with home security devices, burglarresistant door plates Other physical security devices Locks for Bicycles and Motorcycles, Requirements and Test Methods Container Protection Devices, Requirements and test methods dealing with security devices to protect against the removal of easily portable objects, requirements and test methods dealing with home security devices, locking cylinders and locking systems Pay and Display Ticket Machines, Requirements, classification and test methods Automated fuel pumps Products of the industry for safes and strongrooms, incl. locks to protect against burglary EN 1143-1 : 2012 DIN EN 1143-1 : 2012-07 EN 1143-2 : 2001 EN 14450 : 2005 DIN EN 14450 : 2005-06 VdS 2450 : 2012-11 VdS 2451 : 1999-01 E VdS 2560 : 2008 VdS 2528 : 2002-05 Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms Part 2: Deposit systems Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets Safes, ATM Safes, Strongroom Walls and Strongroom Doors; Requirements, Classification and Test methods dealing with strongrooms (solid, modular, mixed construction), requirements and test methods dealing with special-purpose cases dealing with deposit systems Period of validity: 2014-10-02 to 2018-11-28 - Translation - 28/35
VdS 2862 : 2009-11 dealing with secure safe cabinets - requirements, classification, and test methods RAL-RG 626/2 : 1989-06 RAL-RG 626/3 : 1989-06 dealing with strongboxes for valuables complying with level C1 and C2 dealing with money safes complying with GE 1 and GE II in ATM RAL-RG 626/10 : 1989-06 RAL-RG 621/20 : 1989-06 RAL-RG 621/10 : 1989-06 RAL-RG 625/4 : 1989-01 RAL-RG 625/5 : 1987-06 RAL-RG 622/1 : 1987-06 dealing with armoured safes complying with D 10 dealing with armoured safes complying with D 20 dealing with armoured safes complying with E 10 dealing with walls and doors of strongrooms dealing with walls and doors of armoured strongrooms dealing with walls and doors of strongrooms complying with LT 1 RAL-RG 623/10 : 1987-06 dealing with walls and doors of strongrooms complying with T 10 RAL-RG 624/20 : 1987-06 dealing with walls and doors of strongrooms complying with T 20 RAL-RG 627 : 2000-11 dealing with the requirements, classification, and methods to test the resistance to burglary, Part 1: money safes, units holding deposit systems, safes, and strongrooms Locks for the products of the industry for safes and strongrooms DIN EN 1300 : 2011-10 EN 1300 +A1 : 2011 VdS 2396 : 2012-03 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening High Security Locks for Secure Storage Units, Requirements and Test Methods Period of validity: 2014-10-02 to 2018-11-28 - Translation - 29/35
Software test for the aforementioned products VdS 2203 : 2001-03 IEC 60068-1 +Cor/A1 : 1992 EN 60068-1 : 1994 DIN EN 60068-1 : 1995-03 IEC 60068-2-1 : 2007 EN 60068-2-1 : 2007 DIN EN 60068-2-1 (VDE 0468-2-1) : 2008-01 IEC 60068-2-2 : 2007 EN 60068-2-2 : 2007 DIN EN 60068-2-2 (VDE 0468-2-2) : 2008-05 IEC 60068-2-3 +A1 : 1984 HD 323.2.3.S2 : 1987 DIN IEC 60068-2-3 : 1986-12 IEC 60068-2-6 : 2007 EN 60068-2-6 : 2008 DIN EN 60068-2-6 (VDE 0468-2-6) : 2008-10 Software for Fire Prevention and Security Technology, Requirements and Test methods Environmental tests Environmental testing - Part 1: General and guidance Environmental testing - Part 2-1: Tests - Test A: Cold Environmental testing - Part 2-2: Tests - Test B: Dry heat Electrical engineering - Basic environmental testing procedures - Tests; test Ca: damp heat, steady state Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) Period of validity: 2014-10-02 to 2018-11-28 - Translation - 30/35
IEC 60068-2-11 : 1981 EN 60068-2-11 : 1999 DIN EN 60068-2-11 IEC 60068-2-27 : 2008 EN 60068-2-27 : 2009 DIN EN 60068-2-27 (VDE 0468-2-27) : 2010-02 IEC 60068-2-29 : 1987 EN 60068-2-29 : 1993 DIN EN 60068-2-29 : 1995-03 IEC 60068-2-30 : 2005 EN 60068-2-30 : 2005 DIN EN 60068-2-30 : 2006-06 IEC 60068-2-32 +A1/A2 : 1990 EN 60068-2-32 : 1993 DIN EN 60068-2-32 : 1995-03 IEC 60068-2-42 : 2003 EN 60068-2-42 : 2003 DIN EN 60068-2-42 : 2004-04 IEC 60068-2-47 : 2005 EN 60068-2-47 : 2005 DIN EN 60068-2-47 : 2006-03 Environmental testing - Part 2: Tests; test Ka: Salt mist Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock Basic environmental testing procedures - Part 2: Tests; test Eb and guidance: Bump Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) Basic environmental testing procedures - Part 2: Tests; test Ed: Free fall Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests Period of validity: 2014-10-02 to 2018-11-28 - Translation - 31/35
IEC 60068-2-56 : 1988 DIN IEC 60068-2-56 : 1990-07 IEC 60068-2-64 : 2008 EN 60068-2-64 : 2008 DIN EN 60068-2-64 (VDE 0468-2-64) : 2009-04 IEC 60068-2-75 : 1997 EN 60068-2-75 : 1997 DIN EN 60068-2-75 : 1998-06 IEC 60068-2-78 : 2001 EN 60068-2-78 : 2001 DIN EN 60068-2-78 : 2002-09 EN 50130-5 : 2011 DIN EN 50130-5 (VDE 0830-1-5) : 2012-02 ISO 6988 : 1985 EN ISO 6988 : 1994 DIN EN ISO 6988 : 1997-03 DIN 50018 : 1997-06 VdS 2110 : 2011-01 Electrical engineering - Environmental testing - Test Cb: damp heat, steady state, primarily for equipment Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests Environmental testing - Part 2-78: Tests; Test Cab: Damp heat, steady state Alarm systems - Part 5: Environmental test methods Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture Testing in a saturated atmosphere in the presence of sulfur dioxide dealing with the guidelines for alarm systems, protection against environmental impact, requirements and test methods Period of validity: 2014-10-02 to 2018-11-28 - Translation - 32/35
EN 50125-1 +Cor : 2010 DIN EN 50125-1 (VDE 0115 Part 108-1) +Ber1 : 2010-11 EN 50125-2 +Cor : 2010 DIN EN 50125-2 (VDE 0115 Part 108-2) +Ber1 : 2010-11 EN 50125-3 +Cor : 2010 DIN EN 50125-3 (VDE 0115 Part 108-3) +Ber1 : 2010-09 EN 61373 : 2010 DIN EN 61373 (VDE 0115 Part 106) : 2011-04 EN 61000-3-2 + A1/A2 : 2009 DIN EN 61000-3-2 + Ber1 : 2011-06 EN 61000-3-3 : 2008 DIN EN 61000-3-3 : 2009-06 EN 61000-4-2 : 2009 DIN EN 61000-4-2 : 2009-12 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications Railway applications - Rolling stock equipment - Shock and vibration tests EMC Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current less equal 16 A per phase) Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public lowvoltage supply systems, for equipment with rated current <=16 A per phase and not subject to conditional connection Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Period of validity: 2014-10-02 to 2018-11-28 - Translation - 33/35
EN 61000-4-3 +A1/A2 : 2010 DIN EN 61000-4-3 : 2011-04 EN 61000-4-4 +A1 : 2010 DIN EN 61000-4-4 : 2010-11 EN 61000-4-5 : 2006 DIN EN 61000-4-5 : 2007-06 EN 61000-4-6 : 2009 DIN EN 61000-4-6 : 2009-12 EN 61000-4-11 : 2004 DIN EN 61000-4-11 : 2005-02 EN 61000-4-20 : 2010 DIN EN 61000-4-20 : 2011-07 EN 61000-6-1 : 2007 DIN EN 61000-6-1 (VDE 0839-6-1) : 2007-10 EN 61000-6-2 +Cor : 2005 DIN EN 61000-6-2 (VDE 0839-6-2) +Ber1 : 2011-06 EN 61000-6-3 +A1 : 2011 DIN EN 61000-6-3 (VDE 0839-6-3) : 2011-09 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test Electromagnetic compatibility (EMC) - Part 4-4:Testing and measurement techniques - Electrical fast transient/burst immunity test Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments Period of validity: 2014-10-02 to 2018-11-28 - Translation - 34/35
EN 61000-6-4 +A1 : 2011 DIN EN 61000-6-4 (VDE 0839-6-4) : 2011-09 EN 50130-4 : 2011 DIN EN 50130-4 : 2012-02 DIN EN 55011 (VDE 0875 Part 11) : 2011-04 IEC/CISPR 11 +A1 : 2010 DIN EN 55022 (VDE 0878 Part 22) : 2011-12 IEC/CISPR 22 : 2008 VdS 2110 : 2011-01 DIN EN 50155 (VDE 0115 Part 200) +Ber1 : 2010-11 DIN EN 50121-3-2 (VDE 0115 Part 121-3- 2) : 2007-07 DIN EN 50121-4 (VDE 0115 Part 121-4) : 2007-07 DIN EN 61326-1 (VDE 0843 Part 20-1) +Ber1/Ber2 : 2011-04 (Corrigenda 1 / 2) Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement dealing with the guidelines for alarm systems, protection against environmental impact, requirements and test methods Railway applications - Electronic equipment used on rolling stock Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements Period of validity: 2014-10-02 to 2018-11-28 - Translation - 35/35