«Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1 7 17 67 6 p.ameslon@unm.fr Report of CEN/TC 67 Secretariat "Industrial piping and pipelines" for the 0 th Plenary Meeting 7 October 016 (Paris) COMMENTS/ DECISIONS The report of the secretariat was prepared for the 0 th plenary Meeting of CEN/TC 67 to be held on 7 October 016 (Paris). FOLLOW UP To be presented during CEN/TC 67 Plenary Meeting 016-10-7 (Paris) Items 6.1 to 6. of the Draft Agenda CEN/TC 67 N 1060 SOURCE Patrick AMESLON, UNM on behalf of AFNOR, CEN/TC 67 Secretariat Bureau de Normalisation par délégation d AFNOR F-908 Paris La Défense cedex /, rue Louis Blanc - 900 Courbevoie France www.unm.fr - Tél: + 1 7 17 67 67 - Fax : + 1 7 17 67 99
1 SCOPE Standardization of rules constituting a design and manufacturing code comprising the choice of materials, design, fabrication, installation, inspection and testing of industrial piping and pipeline, including the choice of safety systems. The meaning of "industrial piping" is the following: Pipes or pipe networks located on the premises of an industrial site. The meaning of "pipelines" is the following: Pipes or pipe networks located outside premises of an industrial site. The following are excluded from the scope of CEN/TC 67: Pipelines for waste water, and piping for waste water, the latter being directly evacuated via the sewer system outside of industrial premises and/or in the environment (dealt within CEN/TC 16); Pipelines for gaseous fuels (that is to say any fuel that is in gaseous state at a temperature of 1 C and at a pressure of 1 bar (dealt with in CEN/TC ); Piping and pipelines for water for human consumption (dealt with in CEN/TC 16); Pipelines for petroleum and natural gas industries (dealt with in CEN/TC 1). The limits between piping and pipelines are defined by CEN/TC 67/WG 1. STRUCTURE TC Title Chairman Secretary 67 Industrial piping and pipelines Mr. Verrier (France) Mr. Ameslon (UNM - France) WG Title Convenor Secretary 1 General Mr. Di Rienzo(France) Mr. Ameslon (UNM - France) Metallic materials (joint with CEN/TC ) Mr. Langenberg (Germany) Mr. Hanschke (DIN - Germany) Design and calculation Mr. Forterre (France) Mr. Ameslon (UNM - France) Manufacturing and installation Mr. Mussmann (Germany) Mr. Perez Kaiser (DIN - Germany) Inspection and testing Mr. Kittel (Germany) Mr. Perez Kaiser (DIN - Germany) 9 Aluminium and aluminium alloy piping (joint with CEN/TC ) Mr. Kittel (Germany) Mr. Perez Kaiser (DIN - Germany) 8/MHD Maintenance of EN 180 series Mr. Di Rienzo (France) Mr. Ameslon (UNM - France) LIAISONS OF CEN/TC 67 CEN/TC 67 has a liaison with the following committees: - CEN/TC 1 "Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" - CEN/TC "Unfired pressure vessels" - CEN/TC 7 "Flanges and their joints"
- CEN/TC 11 "Welding" - CEN/TC 1 Aluminium and aluminium alloys - CEN/TC 68 "Cryogenic vessels and specific hydrogen technologies applications" - CEN/TC 69 "Shell and water-tube boilers" - ECISS/TC 110 "Steel tubes, and iron and steel fittings" - CEN/TC 0/SC 1 Eurocode 1: Actions on structure - CEN/TC 0/SC Eurocode : Design of steel structures - CEN/TC 0/SC 8 Eurocode 8: Earthquake resistance design of structures WORK PROGRAMME CURRENT STATUS OF WORK ITEMS / Draft project Current status WG 006701 EN 180-1:01/prA1 Resolution CEN/TC 67 N6/010 (document CEN/TC 67 N 71) Extend the scope of to low temperatures (cryogenic applications) 1 Decision CEN/TC 67 N18/01 (document CEN/TC 67 N 1016) 006707 EN 180-6:01/prA Revision of A.. «Global stability of a buried piping system» following the MHD question 6-00-01 + Remarks from Mr. TEASDALE (PED CEN Consultant) on EN 180-6:01/prA1 1 0067061 EN 180-:01/prA Decision CEN/TC 67 N/01 (document CEN/TC 67 N 90) Revision of B.-1 Reference thickness eb (reference thickness for pressure equipment accessories) 006706 EN 180-:01/prA Decision CEN/TC 67 N6/01 (document CEN/TC 67 N 90) Revision for adding material selection criteria for pipe supports 006706 EN 180-:01/prA Decision CEN/TC 67 N9/01 (document CEN/TC 67 N 98) Alignment of Nomograms in EN 1 and EN 180 considering the latest changes incorporated in 01 (new model and extension to t = 00 mm) 006706 EN 180-:01/prA6 Decision CEN/TC 67 N10/01 (document CEN/TC 67 N 98) Extension of the application of method to steel groups,, and 6 according to CEN ISO/TR 1608 006706 EN 180-:01/prA7 Decision CEN/TC 67 N11/01 (document CEN/TC 67 N 98) Revision of Clause B. with respect to more practical use especially concerning Clause B..
/ Draft project Current status WG Activation of the Preliminary Work Dispatch of Enquiry Draft to CCMC by 016-10-0 0067066 EN 180-:01/prA8 Decision CEN/TC 67 N19/01 (document CEN/TC 67 N 1016) Revision of Table B.-9 (bolts and nuts) with respect to changes made in latest version of EN 1069:01 Adoption of a New Work Item Dispatch of Enquiry Draft to CCMC by 016-11-1 0067071 EN 180-:01/prA9 Decision CEN/TC 67 N0/01 (document CEN/TC 67 N 1016) Amending Table A.1 "Grouping system for steels" considering CEN ISO/TR 1608:01 006707 EN 180-:01/prA10 Submitted to CEN Enquiry 016-08- to 016-11-17 (document CEN/TC 67 N 1061) Revision of the scope 00670 EN 180-:01/prA1 Submitted to CEN Enquiry 016-07-1 to 016-10-1 (document CEN/TC 67 N 108) Various items: mitre bends, expansion joints, supports and flanges) 0067067 EN 180-:01/prA Decision CEN/TC 67 N1/01 (document CEN/TC 67 N 98) Revision of Clause 1 and Annex H related to Stress Intensification Factors SIF 006707 EN 180-:01/prA Resolution CEN/TC 67 N/01 (document CEN/TC 67 N 1016) Various items: vibration, creep, materials, steel castings and bolts for stainless steel/creep range 0067069 EN 180-:01/FprA To be submitted to Formal Vote 016-1-01 to 017-01-6 (documents CEN/TC 67 N 10 N 101) Revision of clauses 9.1 "Post-weld heat treatment" and 1. " Connections for static electricity" 006707 EN 180-:01/prA To be submitted to CEN Enquiry 016-11-10 to 017-0-0 (documents CEN/TC 67 N 107 N 10) Modification of clause 9.1.1 "Welding personnel
/ Draft project Current status WG To be submitted to Formal Vote 016-10-0 to 016-1-1 006706 EN 180-:01/FprA (documents CEN/TC 67 N 100 N 10) Inclusion of additional new NDT techniques and the revision of sub-clauses on NDT and destructive testing for formed parts To be submitted to Formal Vote 016-11- to 017-01-19 0067070 EN 180-:01/FprA (documents CEN/TC 67 N 106 N 10) Revision of clauses 8.1. "Imperfections revealed by sample inspection " and 9.. " Pneumatic pressure test " Submitted to the adoption of a Preliminary Work Item 016-0-11 to 016-07-10 0067076 EN 180-:01/prA Decision CEN/TC 67 C7/016 (documents CEN/TC 67 N 108 N 107) Introduction of a new informative Annex B "Initial service leak test" Submitted to the activation of the Preliminary Work Item 016-0-11 to 016-07-10: Decision CEN/TC 67 C/016 006707 prcen/tr 180-7 Decision to launch the TCA: Decision CEN/TC 67 C6/016 not adopted (document CEN/TC 67 N 107) Revision of CEN/TR 180-7:00 related to "Guidance on the use of conformity assessment procedures" PUBLICATIONS of AMENDMENTS since the 01 Edition of EN 180 series 00670 EN 180-:01/A1:01 Publication 01-08-8 00670 EN 180-:01/A1:01 Publication 01-08-8 00670 EN 180-:01/A1:01 Publication 01-08-8 006708 EN 180-8:01/A1:01 Publication 01-0-1 9 006708 EN 180-:01/A:01 Publication 01-1-16 006709 EN 180-8:01/A:01 Publication 01-09-09 9 006706 EN 180-6:01/A1:016 Publication 016-07-7 Revision of clauses A...6. "Stress in the effective length of the pipe" and A...7 "Unrestrained pipe" 1
0067060 EN 180-:01/A:016 0067068 EN 180-:01/A:016 Publication 016-08-17 Revision of Table B.-11 Austenitic stainless steels and their lowest minimum metal temperature TM Foreseen Publication 016-11-0 Revision of clauses 9.1 "Welding personnel" and 9.1.6 "Local heat treatment" 6 SITUATION REGARDING THE DECISIONS ADOPTED BEFORE AND AFTER THE 9 th PLENARY MEETING Decisions DECISION C 01/01 by correspondence (document N 97) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( 006708) to Formal Vote DECISION C 0/01 by correspondence (document N 976) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( 006706) - to nd CEN Enquiry DECISION C 0/01 by correspondence (document N 98) Subject: Adoption of a New Work Item - EN 180-:01/FprA DECISION C 0/01 by correspondence (document N 98) Subject: Adoption of a New Work Item - EN 180-:01/prA DECISION C 0/01 by correspondence (document N 98) Subject: Adoption of a New Work Item - EN 180-:01/prA DECISION C 06/01 by correspondence (document N 98) Subject: Decision on EN 180-8:01/prA after CEN Enquiry ( 006709) to skip the Formal Vote and go to publication DECISION C 07/01 by correspondence (document N 986) Subject: Activation of Preliminary Work Item 006706 - EN 180-6:01/prA1 DECISION C 08/01 by correspondence (document N 988) Subject: Launching of UAP on Work Item 0067068 - EN 180-:01/FprA DECISION N 009/01 (document N 1016) Subject: Appointment of CEN/TC 67/WG 1 Convenor DECISION N 010/01 (document N 1016) Subject: Appointment of CEN/TC 67/WG Convenor DECISION N 011/01 (document N 1016) Subject: Change of track for EN 180-:01/prA1 ( 00670) Follow-up 6
Decisions DECISION N 01/01 (document N 1016) Subject: Annex ZA for European Directive 01/68/UE Pressure Equipment DECISION N 01/01 (document N 1016) Subject: Joint working group of experts with CEN/TC on nonharmonized materials DECISION N 01/01 (document N 1016) Subject: Maintenance Help Desk EN 180/MHD DECISION N 01/01 (document N 1016) Subject: Proposal of a liaison with CEN/TC 0 Follow-up CEN/TC contacted on 01-11-7 Action under progress in CEN/TC DECISION N 016/01 (document N 1016) Subject: Continuation of the liaison with CEN/TC 1, CEN/TC, CEN/TC 7, CEN/TC 11, CEN/TC 1, CEN/TC 68, CEN/TC 69 and ECISS/TC 110 DECISION N 017/01 (document N 1016) Subject: Approval of the revised Business Plan DECISION N 018/01 (document N 1016) Subject: Adoption of a Preliminary Work Item - EN 180-6:01/prA DECISION N 019/01 (document N 1016) Subject: Activation of preliminary Work Item 0067066 - EN 180-:01/prA8 DECISION N 00/01 (document N 1016) Subject: Adoption of a New Work Item - EN 180-:01/prA9 DECISION N 01/01 (document N 1016) Subject: Adoption of a New Work Item - EN 180-:01/prA10 DECISION N 0/01 (document N 1016) Subject: Activation of preliminary Work Item 00670 - EN 180-:01/prA1 DECISION N 0/01 (document N 1016) Subject: Adoption of a Preliminary Work Item - EN 180-:01/prA DECISION N 0/01 (document N 1016) Subject: Adoption of a Preliminary Work Item - EN 180-:01/prA 7
Decisions DECISION C 01/016 by correspondence (document N 100) Subject: Decision on EN 180-:01/prA after nd CEN Enquiry ( 006706) to Formal Vote DECISION C 0/016 by correspondence (document N 10) Subject: Decision on EN 180-6:01/prA1 after CEN Enquiry ( 006706) Skip Formal Vote and go to Publication DECISION C 0/016 by correspondence (document N 10) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( 0067069) to Formal Vote DECISION C 0/016 by correspondence (document N 106) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( 0067070) to Formal Vote DECISION C 0/016 by correspondence (document N 107) Subject: Activation of preliminary Work Item 006707 - prcen/tr 180-7 DECISION C 06/016 by correspondence (document N 107) Subject: Decision to launch the TCA for FprCEN/TR 180-7:016 DECISION C 07/016 by correspondence (document N 108) Subject: Adoption of a Preliminary Work Item - EN 180-:01/prA DECISION C 08/016 by correspondence (document N 109) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( 0067060) Skip Formal Vote and go to Publication DECISION C 09/016 by correspondence (document N 107) Subject: Activation of preliminary Work Item 006707 - EN 180-:01/prA Follow-up Not accepted Swedish comments to study Action under progress in CEN/TC 67/WG 8