Meets Global Standards

No.CP-PC-6E Explosion-Proof Switches Compliant IEC Standards Vertical Explosion-Proof Switches L X7000 Series -Point Detection Explosion-Proof Switches VCX-7000 Series Ex d e C T6 certified Meets Global Standards Limit Switches Compliant IEC Explosion-Proof Standards

Meeting global standards through continued safe and reliable product performance Through a combination of explosion-proof internal switches and a housing an increased- explosion-proof structure, these limit switches have been certified as explosion-proof ( Ex d e ⅡC T6). Product Lineup A wide range of actuators The actuator can be used in combination all general-purpose limit switch levers. Compliant a range of cable lead-in s Conduit : -in conduit and lead-in insulated cable Packing (TIIS explosion-proof product) : cable lead-in using explosion-proof connectors For products that have been certified as explosion-proof by international standards, metric fine threads are also available for use in combination cable s that comply IEC explosion-proof standards..5 for the LX7000 series, and M5.5 for the VCX-7000 series.

IEC-Compliant Explosion-Proof Switches IEC Explosion-Proof Standards Compliance IEC explosion-proof standards are increasingly being accepted as global standards. Because we ensure compliance IEC standards, our switches have also been certified as meeting Jaese explosionproof standards, as well as those of other areas such as Europe and Asia (China, South Korea). External Standards LX7000 series LX7000-R series VCX-7000 series VCX-7000-R series TIIS (Ja) NEPSI (China) KOSHA (South Korea) CNS (Taiwan) IECEx:Valid in certain IECEx member countries. Please check whether applicable. ATEX NK (Europe) IECEx( ) (Shipping) - - - - - - - - - - - - Installation Environment Reliable and robust for outdoor installation With an aluminum alloy housing, anti-corrosion treatment, and baked finish, these switches are weather-resistant. Silicone rubber has been used in sealing materials for its excellent weatherproofing properties, and all external s are made of stainless steel. Corrosion-Resistant Corrosion-resistance prevents salt damage The housing uses a corrosion-resistant aluminum alloy, further anti-rust treatment and a baked acrylic finish to prevent corrosion rust, affording improved workability during maintenance and checks. LX7000 series : Available for all models having a LX, LX or 5LX head. VCX-7000 series: Available for all models. Results of 00 hours of salt spray testing Outstanding Explosion-Proof Performance Ex d e C T6 certified Standard model Corrosionresistant model By combining internal switches having an explosionproof structure a housing having an increased explosion-proof structure, these switches meet IIC T6 explosion-proof standards and can be used in hydrogen gas atmospheres. They can also be used in Zone (hazardous area) applications. Reliable Switching of Very Low Loads Switches gold contacts are available to prevent the corrosion of contacts by atmospheric gases and other elements. Explosion-Proof Performance: IEC Explosion-Proof Standards Explosive Gas Group Classification and Temperature Levels Temperature level Maximum surface temperature of electrical device Technological standards (group classification) A B T T T T T5 T6 50 00 00 00 85 Ammonia Carbon monoxide Ethane Toluene Proe Methane Hydrogen cyanide Coal gas Ethanol Butanol Butane Vinyl chloride Furane Ethyl acrylate Ethylene C Hydrogen Acetylene Hexane Gasoline Kerosene Pentane Dimethyl ether Trimethylamine Acrylonitrile Cyclohexane Isoprene Acetylacetone Acetaldehyde Carbon dioxide Ethyl nitrite Ethyl nitrate Easily-Removable Cover When the housing and cover were redesigned to make an explosion-proof container increased, the cover was made so that it can be mounted and removed easily, out pinching wires between the cover and housing during wiring or inspections. Note: The stipulations for joint surface gap s and gaps that prevent flame from spreading have been relaxed on increased- explosion-proof enclosures, but they can be used for Zone and Zone applications.

Vertical Explosion-Proof Switches Compliant IEC Standards LX7000 Series Five different head s are available (, plunger, roller plunger, fork lever lock, nondirectional movement) according to customer requirements for movement mechanisms. In addition, for the, selection can be made from general-purpose limit switch levers according to attachment conditions. For the LX7000 series, head orientation can be changed to either front, back, left or right (-directional). For the (LX), the plunger (LX) and the roller plunger (5LX), corrosion-resistant switches are available (see page for details). A corrosion-resistant explosion-proof connector is also available for use in combination the increased- corrosion-resistant. Note: Please contact one of our sales representatives for information on corrosion-resistant s. External standards TIIS (Ja) NEPSI (China) KOSHA (South Korea) CNS (Taiwan) ATEX (Europe) IECEx NK (shipping) Explosion-proof structure Ex d e C T6 Ex d e C T6 Ex d e C T6 IP67 Ex d e C T6 G Ex d e C T6 Ex d e C T6 Gb Ex d e C T6

IEC-Compliant Explosion-Proof Switches LX7000 Series Model Numbers Head Roller lever Plunger Actuator Standard No lever Plunger Roller plunger Fork lever lock Nondirectional movement lead-in Contact material External standards TIIS NEPSI KOSHA CNS ATEX IECEx NK LX700-J LX700-P LX700-S LX700-ET LX700 LX700-E LX700-N LX700-JK LX700-PK LX700-SK LX700-ETK LX700-K LX700-EK LX700-NK LX700-R LX700-RK LX700-A LX700-AK LX700-Q LX700-V LX700-FT LX700-C LX700-F LX700-N LX700-QK LX700-VK LX700-FTK LX700-CK LX700-FK LX700-NK LX700-J LX700-P LX700-S LX700-ET LX700 LX700-E LX700-N LX700-JK LX700-PK LX700-SK LX700-ETK LX700-K LX700-EK LX700-NK LX700-R LX700-RK LX700-A LX700-AK LX700-Q LX700-V LX700-FT LX700-C LX700-F LX700-N LX700-QK LX700-VK LX700-FTK LX700-CK LX700-FK LX700-NK LX700-J LX700-P LX700-S LX700-ET LX700 LX700-E LX700-N LX700-JK LX700-PK LX700-SK LX700-ETK LX700-K LX700-EK LX700-NK LX700-R LX700-RK LX700-A LX700-AK LX700-Q LX700-V LX700-FT LX700-C LX700-F LX700-N LX700-QK LX700-VK LX700-FTK LX700-CK LX700-FK LX700-NK LX700-J LX700-P LX700-S LX700-ET LX700 LX700-E LX700-N LX700-JK LX700-PK LX700-SK LX700-ETK LX700-K LX700-EK LX700-NK LX700-R LX700-RK LX700-A LX700-AK LX700-Q LX700-V LX700-FT LX700-C LX700-F LX700-N LX700-QK LX700-VK LX700-FTK LX700-CK LX700-FK LX700-NK 5LX700-J 5LX700-P 5LX700-S 5LX700-ET 5LX700 5LX700-E 5LX700-N 5LX700-JK 5LX700-PK 5LX700-SK 5LX700-ETK 5LX700-K 5LX700-EK 5LX700-NK 5LX700-R 5LX700-RK 5LX700-A 5LX700-AK 5LX700-Q 5LX700-V 5LX700-FT 5LX700-C 5LX700-F 5LX700-N 5LX700-QK 5LX700-VK 5LX700-FTK 5LX700-CK 5LX700-FK 5LX700-NK 6LX700-J 6LX700-P 6LX700-S 6LX700-ET 6LX700 6LX700-E 6LX700-N 6LX700-JK 6LX700-PK 6LX700-SK 6LX700-ETK 6LX700-K 6LX700-EK 6LX700-NK 6LX700-R 6LX700-RK 6LX700-A 6LX700-AK 6LX700-Q 6LX700-V 6LX700-FT 6LX700-C 6LX700-F 6LX700-N 6LX700-QK 6LX700-VK 6LX700-FTK 6LX700-CK 6LX700-FK 6LX700-NK 8LX700-J 8LX700-P 8LX700-S 8LX700-ET 8LX700 8LX700-E 8LX700-N 8LX700-JK 8LX700-PK 8LX700-SK 8LX700-ETK 8LX700-K 8LX700-EK 8LX700-NK 8LX700-R 8LX700-RK 8LX700-A 8LX700-AK 8LX700-Q 8LX700-V 8LX700-FT 8LX700-C 8LX700-F 8LX700-N 8LX700-QK 8LX700-VK 8LX700-FTK 8LX700-CK 8LX700-FK 8LX700-NK Notes: For cable lead-in -J TIIS certification, use it in combination a nipple and ceiling fitting. Anti-corrosion models are available for LX, LX, and 5 LX series except for cable A. For details, contact the local Azbil branch office or sales office. Coding of catalog listing: LX700 - M Example: LX700-JKM Anti-corrosion 5

LX7000 Series Specifications Head Item Roller lever LX700 - Plunger LX700- Roller plunger 5LX700- Fork lever lock 6LX700 - Nondirectional movement 8LX700- Structure Contact form Terminal Contact material Explosion-proof structure -circuit double break (CKT-DB ) M head square Silver/gold-plated rivet Internal switch: d (explosion-proof), housing: e (increased- explosion-proof) Protective structure IP67 (IEC 6059, JIS C 090) Electrical rating Silver: 5A at 50 Vac, 0.8A at 5 Vdc, 0. A at 50 Vdc : 0.A at 5 Vac, 0. A at 0 Vdc Electrical performance Dielectric strength Insulation resistance Initial contact resistance Recommended min. contact operating voltage/ current Actuator strength Terminal strength Between continuous s: 600 Vac, 50/60 Hz for minute Between each and non-live metal part: 000 Vac, 50/60 Hz for minute Between each and : 000 Vac, 50/60 Hz for minute Min. 00 MΩ (by 500 Vdc megger) Silver: max. 50 MΩ (6 8 Vdc, thermal current A, measured by voltage drop method) : max. 00 MΩ (6 8 Vdc, thermal current 0. A, measured by voltage drop method) Silver: 0 ma at V, 0 ma at V : 0 ma at 5 V Withstands loads 5 times O.F. (operating direction for minute) Withstands tightening torque of.5 N m for minute Impact resistance 00 m/s², contacts open for ms max. in free position and total travel position * Mechanical performance Life Vibration resistance Allowable operating speed Operating frequency Mechanical Electrical.5 mm peak-to-peak amplitude, frequency 0 to 55 Hz, h continuously, contacts open for ms max. in free position and total travel position.0 mm/s to 0.5 m/s * At min. speed, unstable state of contacts lasts for 0. s max. At max. speed actuator is not damaged. Max. 0 operations/minute Min. million operations ( overtravel at 70 to 00% of rated value) 0 operations/ minute Min. million operations 0 mm/s to 0. m/s 0 operations/ minute Min. million operations Silver: min. 00,000 operations, 5 A at 50 Vac, 0.8 A at 5 Vdc, 0. A at 50 Vdc (Min. 500,000 operations, A at 50 Vac, 0. A at 5 Vdc, 0. A at 50 Vdc) : min. million operations, 0. A at 5 Vac, 0. A at 0 Vdc Environment Recommended tightening torque Applicable cable size Operating temperature Operating humidity 0 to +60 (no freezing allowed) 5 85%RH Storage temperature 0 to +60 Storage humidity Group and temperature class Hazardous area classification Body Cover Head Terminals Lever Internal External Terminals Internal External Stranded cable Single cable Max. 98% RH ( conduit section plug inserted) ⅡC T6 Zone and Zone hazardous areas 5 6 N m (M5 ) 5 6 N m (M5 )..7 N m (M head head )..7 N m (M head square ) 5. N m (M5 )..7 N m (M binding head machine )..7 N m (M binding head machine ) Nominal cross-sectional area 0.5 mm to.5 mm (AWG0 to AWG6) Nominal cross-sectional area 0.5 mm to.5 mm (AWG0 to AWG6) Uses M crimp- insulating coating Uses M crimp- s a nominal cross-sectional area of up to mm can be connected *:Not in free position for 8LX *:When dock angle is 0 for 5LX. 6

M6 M6 M6 FP (free position) IEC-Compliant Explosion-Proof Switches (operating position) (operating position) LX7000 Series External Dimensions Operational characteristics OF (operating force) ing position) (operating position) crew crew s steel OT (overtravel) (operating position) (operating position) (operating position) (operating position) 5 When lever length is 8. mm Stainless steel plunger 6.7 dia 5 Stainless steel roller M head M Roller plunger head 5LX700-6.7 dia 5 Stainless steel roller Stainless steel 6.7 dia 5 plunger roller M Stainless steel head M M6 head M head M6 Min. M6 M5 M6 head Min. M6 Min. characteristics Operational OF (operating force) 6.7 N max RF (reset force) 8.9 N min M 7 head 50 (operating position) Refer to table 50 (operating position) Refer to table 6 (operating position) Refer to table 6 (operating position) Refer to table 7 max 55 min RT (reset travel) R6 to 89 range Stainless steel LX700- plunger M R6 tom5 89 head range head ()head M 7 Stainless steel plunger M6 M Min. head M6 M5 head Min. () M6 M6 Min. head Operational characteristics (operating position) (operating position) OF (operating force) 6.7 N max RF (reset force) 8.9 N min.65 mm max MD (movement differential) 0.5mm max OT (overtravel) 5 mm min (operating position) (operating position) black nylon roller osition) (operating position) crew 55 min max MD (movement differential) 5 Type M6 FP (free position) (operating position) (operating position).n min black nylon roller R6 to 89 range.8 N max RF (reset force) 7 max Ground M 7 head Circuit diagram M5 Detailed diagram connections Terminal Terminal no. to 89 no. R6Type black Terminal nylon roller range R6 to 89 M 7 head Ground black nylon roller M5 range head M5 head M 7 head () M6 Min. Terminal no. head () head M6 () OF (operating force) max MD (movement differential) Plunger ) rating position) ew pth RT (reset travel) ) g ).N min OT (overtravel) n eel roller RF (reset force) LX700-7. dia 6. black nylon roller Terminal connections roller lever Operational characteristics (operating position) (operating position).8 N max 50 (operating position) Refer to table d d g Detailed diagram.65mm max MD (movement differential) 0.5mm max OT (overtravel) 5 mm min R8.6max 6 (operating position) Refer to table ree position) n) (operating position) Circuit diagram 6 (operating position) Refer to table 6 (operating position) Refer to table M6 M 7 head M5 head LX700- roller lever Circuit Terminal connections black diagram nylon roller Detailed diagram M 7 Type head M5 Ground head Circuit diagram M6 Terminal Detailed diagram connections Terminal no. Type Ground M6 Terminal no. position) (operating (operating position) 50 (operating position) Refer to table Standard M6 M5 Min. head 6 nd ew ng ) (operating position) (operating position) unit mm (operating position) (operating position) black nylon roller e 7 d 5 her cket head nting 8 nal w 7. dia max. Coiled stainless steel M.5 7 8LX700- actuator head M Boot seal head 7. dia max. S will operate by black nylon roller () M head R8.6max Coiled stainless steel moving actuator in M.5 7 (operating position) actuator M any direction except pull head 7. dia max. S will operate by 7. dia 6. head LX700 - J 6.7 dia 5 R8.6max Coiled stainless steel moving actuator in black nylon rollerposition) () Boot seal Increased- conduit Stainless steel roller (operating M.5 7 pull actuator any direction except head head M5 head M head black nylon roller () head M Boot seal M M.5 7 head head head LX7 M6 M6 M head head M6 Incre M5 Min. Min. M head LX700 - J head Increased- conduit t M M6 head M6 parallel for piping Effective thread 5 threads min. M6 M6 M6Min. Min. M6 After CCW operation Effect After CW operation Stop position Stop position Operational characteristics Operational characteristics parallel for pipi PT up to operation Effective thread 5 threads m OF (operating force) 9.8 N max OF (operating force). N max PT up to release After CCW operation 60 min RF (reset force) After CW operation Stop position Stop position OT (overtravel) 0 max MD (movement differential) PT up to operation After CCW operation Mechanical reverse angle 55 max OT (overtravel) PT up to release After CW operation Stop position When lever length is 8. mm At rod end position Stop position After CCW operation PT up to operation 7. dia max. After CW operation S will operate by Stop position R8.6max Coiled stainless steel Stop position moving actuator in PT up to release (operating position) PT up to operation actuator any direction except pull Fork lever lock Circuit diagram 6.7 dia 5 Stainless steel roller 6LX700- PT up to release Boot seal Detailed diagram M head S will operate by black nylon roller () moving actuator in Nondirectional (operating position) movement any direction except pull Terminal connections Conduit section details Terminal no. max. 7. dia Type S will operate by LX700 - J LX700 - R LX700 - A Coiled stainless steel moving actuator in LX700 actuator Increased- conduit Increased- Increased- any direction except pull Ground section Conduit details Boot seal LX700 - R LX700 - A LX700 M head Increased- conduit Increased- Increased- Conduit section details M6 LX700 - J LX700 - R LX700 - A Conduit section details LX700 Increased- conduit Increased- Increased- LX700 -R LX700 - A head LX700 - J.5 LX700 Increased- Increased- conduit Increased- Effective thread : min. 5 threads parallel for piping Effective thread 5 threads Effective thread 0 threads min. : Q,V,FT,C,F,N M6.5 min. Effective thread : min. 5 threads Tolerance for dimensions is ± 0.8 unless otherwise stated. parallel for piping.5 Effective thread 5 threads min. Effective thread 0 threads min. : Q,V,FT,C,F,N Effective thread : min. 5 threads parallel for piping.5 Effective : Effective threadthread 5 threads min. Effective thread 0 threads min. : Q,V,FT,C,F,N min. 5 threads parallel for piping Effective thread 5 threads min. Effective thread 0 threads min. : Q,V,FT,C,F,N R8.6max (operating position) LX700 - J 7

-Point Detection Explosion-proof Switches Compliant IEC Standards VCX-7000 Series The center-neutral switch has different internal switches that move in accordance the direction of the actuator movement. The simultaneous operation switch has internal switches that move simultaneously, and do not depend on the direction of the actuator movement. Actuators can be selected from general-purpose limit switch levers according to attachment conditions. The head orientation of the center-neutral switch can be switched to front or back (-directional) and the head orientation of the simultaneous operation can be switched to front, back, left or right (-directional). For the VCX-7000 series, the corrosion-resistant is available for all model numbers (see page on corrosion resistance for more details). A corrosion-resistant explosion-proof connector is also available for use in combination the increased- corrosion-resistant. Note: Please contact one of our sales representatives for detailed specifications on the corrosion-resistant. External standards TIIS (Ja) NEPSI (China) KOSHA (South Korea) CNS (Taiwan) ATEX (Europe) IECEx NK (shipping) Explosion-proof structure Ex d e C T6 Ex d e C T6 Ex d e C T6 IP67 Ex d e C T6 G Ex d e C T6 Ex d e C T6 Ex d e C T6 8

IEC-Compliant Explosion-Proof Switches VCX-7000 Series Model Numbers External standards Head Actuator lead-in Contact material TIIS NEPSI KOSHA CNS ATEX IECEx NK G/ VCX-700-J VCX-700-P VCX-700-S VCX-700-ET VCX-700 VCX-700-E VCX-700-N VCX-700-JK VCX-700-PK VCX-700-SK VCX-700-ETK VCX-700-K VCX-700-EK VCX-700-NK Standard M5 G/ VCX-700-R VCX-700-RK VCX-700-A VCX-700-AK VCX-700-Q VCX-700-V VCX-700-FT VCX-700-C VCX-700-F VCX-700-N VCX-700-QK VCX-700-VK VCX-700-FTK VCX-700-CK VCX-700-FK VCX-700-NK VCX-700-J VCX-700-P VCX-700-S VCX-700-ET VCX-700 VCX-700-E VCX-700-N VCX-700-JK VCX-700-PK VCX-700-SK VCX-700-ETK VCX-700-K VCX-700-EK VCX-700-NK Centerneutral No lever VCX-700-R VCX-700-RK VCX-700-A VCX-700-AK M5 VCX-700-Q VCX-700-V VCX-700-FT VCX-700-C VCX-700-F VCX-700-N VCX-700-QK VCX-700-VK VCX-700-FTK VCX-700-CK VCX-700-FK VCX-700-NK G/ VCX-700-J VCX-700-P VCX-700-S VCX-700-ET VCX-700 VCX-700-E VCX-700-N VCX-700-JK VCX-700-PK VCX-700-SK VCX-700-ETK VCX-700-K VCX-700-EK VCX-700-NK VCX-700-R VCX-700-RK M5 G/ VCX-700-A VCX-700-AK VCX-700-Q VCX-700-V VCX-700-FT VCX-700-C VCX-700-F VCX-700-N VCX-700-QK VCX-700-VK VCX-700-FTK VCX-700-CK VCX-700-FK VCX-700-NK VCX-70-J VCX-70-P VCX-70-S VCX-70-ET VCX-70 VCX-70-E VCX-70-N VCX-70-JK VCX-70-PK VCX-70-SK VCX-70-ETK VCX-70-K VCX-70-EK VCX-70-NK Standard VCX-70-R VCX-70-RK VCX-70-A VCX-70-AK M5 VCX-70-Q VCX-70-V VCX-70-FT VCX-70-C VCX-70-F VCX-70-N VCX-70-QK VCX-70-VK VCX-70-FTK VCX-70-CK VCX-70-FK VCX-70-NK G/ VCX-70-J VCX-70-P VCX-70-S VCX-70-ET VCX-70 VCX-70-E VCX-70-N VCX-70-JK VCX-70-PK VCX-70-SK VCX-70-ETK VCX-70-K VCX-70-EK VCX-70-NK Simultaneous operation No lever VCX-70-R VCX-70-RK VCX-70-A VCX-70-AK M5 VCX-70-Q VCX-70-V VCX-70-FT VCX-70-C VCX-70-F VCX-70-N VCX-70-QK VCX-70-VK VCX-70-FTK VCX-70-CK VCX-70-FK VCX-70-NK G/ VCX-70-J VCX-70-P VCX-70-S VCX-70-ET VCX-70 VCX-70-E VCX-70-N VCX-70-JK VCX-70-PK VCX-70-SK VCX-70-ETK VCX-70-K VCX-70-EK VCX-70-NK VCX-70-R VCX-70-RK M5 VCX-70-A VCX-70-AK VCX-70-Q VCX-70-V VCX-70-FT VCX-70-C VCX-70-F VCX-70-N VCX-70-QK VCX-70-VK VCX-70-FTK VCX-70-CK VCX-70-FK VCX-70-NK Notes: For G/ cable lead-in TIIS certification (-J), use it in combination a nipple and ceiling fitting. Anti-corrosion models are available except for cable A. For details, contact the local Azbil branch office or sales office. Coding of catalog listing: VCX-7 0 - M Example: VCX-700-RKM Anti-corrosion 9

VCX-7000 Series Specifications Item Specifications Structure Contact form Single-pole double-throw (SPDT) Terminal M.5 head square Contact material Silver: rivet. Gold alloy: cross-point Explosion-proof structure Internal switch: d (explosion-proof), housing: e (increased- explosion-proof) Protective structure IP67 (IEC 6059, JIS C 090) Electrical performance Mechanical performance Life Electrical rating Dielectric strength Insulation resistance Initial contact resistance Recommended min. contact operating voltage/ current Actuator strength Terminal strength Impact resistance Vibration resistance Allowable operating speed Operating frequency Mechanical Electrical Silver: 5A at 50 Vac, 0.A at 5 Vdc, 0. A at 50 Vdc Gold alloy: 0. A at 5 Vac, 0. A at 0 Vdc Between continuous s: 600 Vac, 50/60 Hz for minute Between non-continuous s:,000 Vac, 50/60 Hz for minute Between each and non-live metal part: 000 Vac, 50/60 Hz for minute Between each and : 000 Vac, 50/60 Hz for minute Min. 00 MΩ (by 500 Vdc megger) Silver: max. 50 MΩ (6 8 Vdc, thermal current A, measured by voltage drop method) Gold alloy: max. 00 MΩ (6 8 Vdc, thermal current 0. A, measured by voltage drop method) Silver: 0 ma at V, 0 ma at V Gold alloy: 0 ma at 5V Withstands loads 5 times O.F. (operating direction for minute) Withstands tightening torque of 0.6N m for minute 00 m/s², contacts open for ms max. in free position.5 mm peak-to-peak amplitude, frequency 0 to 55 Hz, h continuously, contacts open for ms max. in free position and total travel position 0. mm/s to 0.5 m/s At min. speed, unstable state of contacts lasts for 0. s max. At max. speed actuator is not damaged. Max. 0 operations/minute Min. million operations ( overtravel at 70 to 00% of rated value) Silver: min. 0,000 operations, 5 A at 50 Vac, 0. A at 5 Vdc, 0. A at 50 Vdc (Min. 00,000 operations, A at 50 Vac, 0. A at 0 Vdc, 0. A at 5 Vdc, 0. A at 50 Vdc) Gold alloy: min. million operations, 0. A at 5 Vac, 0. A at 0 Vdc Environment Recommended tightening torque Applicable cable size Operating temperature Operating humidity 0 to +60 (no freezing allowed) 5 85%RH Storage temperature 0 to +60 Storage humidity Group and temperature class Hazardous area classification Body Cover Head Terminals Lever Internal External Terminals Internal External Stranded cable Single cable Max. 98% RH ( conduit section plug inserted) ⅡC T6 Zone and Zone hazardous areas 5 6 N m (M5 ) 5 6 N m (M5 )..7 N m (M head head ) 0.8. N m (M.5 head square ) 5. N m (M5 ) 0. 0.6 N m (M binding head machine toothed )..7 N m (M binding head machine ) Nominal cross-sectional area 0.5mm to.5 mm (AWG0 to AWG6) Nominal cross-sectional area 0.5 mm to.5 mm (AWG0 to AWG6) Uses M crimp- insulating coating Uses M crimp- s a nominal cross-sectional area of up to mm can be connected 0

: Q,V,FT,C,F,N Standard : Q,V,FT,C,F,N : Q,V,FT,C,F,N VCX-7000 Series IEC-Compliant Explosion-Proof Switches External Dimensions (unit:mm)

Explosion-Proof Packing Connectors (Standard) Shaft Cover Model no. PA-JEX08PM PA-JEX09PM Protective pipe dimensions Compatible cable diameter φ7.5~8.5 φ8.5~9.5 Catalog listing Support model Material PA-J9 LX Silicone PA-J69 VCX Silicone PA-JEX0PM PA-JEXPM PA-JEXPM PA-JEXPM PA-JEX08PM PA-JEX09PM φ9.5~0.5 φ0.5~.5 φ.5~.5 φ.5~.5 φ7.5~8.5 φ8.5~9.5 Protective Plug Catalog listing Support model Screw nominal size PA-J7 LX PA-J7 VCX G/ Sold in sets of 0. PA-JEX0PM PA-JEXPM PA-JEXPM PA-JEXPM G/ φ9.5~0.5 φ0.5~.5 φ.5~.5 φ.5~.5 Cover O ring Catalog listing Support model Material PA-J7 LX/VCX Silicone Sold in sets of 0. Auxiliary Actuators Type Shape Lever length Model no. Roller material Lever material Method of attaching lever 8. mm 6PA-J6 Black nylon Corrosion-resistant aluminum Hexagon 8. mm 6PA-J78 Brass Corrosion-resistant aluminum Hexagon head 8. mm LS-6PA-00 Black nylon Stainless Hexagon 8. mm LS-6PA-00 Brass Stainless Hexagon 0 mm 6PA-J05 Black nylon Corrosion-resistant aluminum Hexagon 0 mm LS-6PA07 Brass Corrosion-resistant aluminum Hexagon 0 mm LS-6PA-0 Black nylon Stainless Hexagon 0 mm LS-6PA-0 Brass Stainless Hexagon 6.0~89.0 mm 6PA-J79 Black nylon 6.0~89.0 mm 6PA-J9 Brass Stainless/ Corrosion-resistant aluminum Stainless/ Corrosion-resistant aluminum Hexagon Hexagon LS-6PA0 Fork lever lock 8. mm LS-6PA Black nylon Corrosion-resistant aluminum Hexagon LS-6PA Please read the "Terms and Conditions" from the following URL before ordering or use: http://www.azbil.com/products/bi/order.html Other product names, model numbers and comy names may be trademarks of the respective comy. [Notice] Specifications are subject to change out notice. No part of this publication may be reproduced or duplicated out the prior written permission of Azbil Corporation. Yamatake Corporation changed its name to Azbil Corporation on April, 0. -- Kawana, Fujisawa Kanagawa 5-85 Ja URL: http://www.azbil.com st Edition : Jan. 0/ ED nd Edition : Feb. 0/ ED () CP-PC-6E