0-0V ~ 0Hz Ph 0-0V ~ 0Hz Ph Slim Line Ceiling Concealed Ducted Split Systems Ducted Split System Heat Pump - - - 0 - - - 0 DC Inverter Inverter Technology $ Operation Hydrophilic Aluminum Fins Independent Dehumidification Optional Drain Pump Refrigerant Leak Detection R-0A HFC Refrigerant R0A Inverter Compressor Super Quiet CO Function Anti Freezing Anti-Freezing asy Flexible Installation IAQ Anti-dust Filters 0~00 Pa Medium Static Pressures Wired Control Timer Functions High Temp. Protect High Temp. asy Fast Service & Maintenance Fresh Air Fans Wireless Control Restart Function Cold Draft Washable Air Filter Slim Design Coils Fan Speed Min. Minutes Time Delay Defrost Display Panel Inner Groove Copper Tubing Mode Durability Self diagnostic function
Ducted Split Systems SMART CONTROLS Wired room controller FFICINT, TROPICAL & QUIT OUTDOOR UNIT Sizes : -- $ Sizes : 0 - ( option ) Wireless Remote control Sizes : -0 Heat Pump medium static pressure, slim line, ceiling concealed ducted split is the optimum air conditioning solution for places which require ceiling installation above false ceiling and minimum sound levels. Its slim profile and flexible installation make this system the best choice for residential and light commercial applications where the units are practically hidden from view. KY FATURS Healthy & Clean Indoor Air Quality (IAQ) anti dust washable aluminim air filters for clean and healthy air. The indoor unit is fitted with a fresh air knock out panel that can be utilized to introduce fresh air into the room. This helps prevent the build of stale air and enhances air quality in working environments and enclosed applications without natural fresh air supply. Modern Slim Design Compact invisible indoor unit with ultra slim profile and low height is just cm for sizes K-K,. cm for sizes 0K-K and 0 cm for sizes K-K-0K suitable for low false ceiling applications. Smart display panel shows control functions and also shows error code in case of a malfunction. Tropical Operation with Minimum lectrical Consumption works with the new R-0A refrigerant which increases its energy efficiency and does not degrade the ozone layer. Patented heat transfer and aerodynamics technologies to ensure prefect operation up to C outdoor ambient temperature for energy saving and low operating cost. Superior air distribution performance : Three fan speeds with external static pressure up to 0 ~ 00 Pa as per the model to satisfy air flow and static pressure requirements to suit various applications. Air Management System (AMS) leading to maximum air flow with minimum turbulence for minimum air resistance, smooth airflow and efficient operation. Carrier innovative outdoor axial fan technology for efficient operation with minimum air resistance and maximum air flow. Carrier innovative double inlet, double width forward curved centrifugal blower technology driven by speeds high efficiency motor of low power consumption. indoor and outdoor coils with large heat transfer surfaces for minimum electrical consumption. trapeziform Inner groove copper tubing compared with traditional copper tubing, it allows more refrigerant flow, improvs heat exchange efficiency and lowers power consumption while keeping the same capacity output level. Precoated Hydrophilic Aluminum Fins of indoor coil to protect the coil against corrosion and to allow easy and quick removal of unrestricted condensate water between the coil fins to increase airflow, improve heat exchange efficiency and accelerate cooling process. IAQ R-0A HFC $ 0~00 Pa AMS Quiet with Minimum Sound Level Patented centrifugal blower, elephant ear propeller, new heat exchangers, improved Air Management System (AMS), and quiet compressor. Statically and dynamically balanced fans for quiet operation. Minimum vibrations with strengthened sheet metal parts by finite element analysis. Comfort with Complete Control Functions Standard Smart Wired Controller with complete control functions built in the control system. Wired Controller can be fixed on the wall and avoid mislaying. It s mainly used for commercial zone and makes the control more convenient. Standard Smart LCD infrared wireless remote control with complete control functions built in the control system to ensure efficiency at all operating conditions. Optional Smart Link central Control to monitor from a center point, the operation of number of ducted indoor units in the same project site. This feature is particularly helpful in large office applications and hotels. fan speed which changes automatically the fan speed to high or medium or low fan speed by sensing the temperature difference between the room temperature and setting temperature. mode which changes automatically the operation mode and capacity output according to temperature difference between room temperature and setting temperature. Independent Dehumidification mode which dehumidifies the room efficiently, but not lower the temperature so obviously as cooling operation. CO function for energy saving and comfortable healthy sleep which automatically changes fan speed to low speed and controls both setting and room temperatures. Programmable timer for easy on and off selection with energy savings including off timer, on timer, off/on timer and on/off timer functions. Follow Me function for smart wired control of comfortable temperature. With this technology, an efficient temperature sensor is built in the wired control just like the air conditioner is following wired control. Durability Anti-rust, weather proof and long life indoor unit sheet metal parts made of chemically treated and zinc coated ( galvanized ) sheet metal. Drain pan is designed to protect against rust, to minimize wet surface and residual water during off cycles and to inhibit bacteria growth that may cause smells. Anti-rust, weather proof and long life outdoor unit sheet metal parts made of chemically treated and zinc coated ( galvanized ) sheet metal. Powder painted casing of outdoor unit with prefect adhesion of highly resistant ployester paint 0-0 microns thick, which is electro-statically applied and baked at a temperature of 0 C. Optional coated aluminum fins of outdoor coil for coastal applications to protect against corrosion. Key Features Smart Link Complete Safety & Reliability Functions restart function with backup memory. When the power failure happenes during the operation of air conditioner, the microprocessor of the Printed Circuit Board will memorize the operation setting. After the power is recovered, the air conditioner operates automatically ( without remote control but after elapse of compressor safety time delay ), according to the previous operation settings. (three) minutes safety time delay between compressor turning off and turning on for compressor protection against cycling. Anti-freezing protection of indoor coil when the air conditioner is operating in cool mode with excessive dirt on the indoor coil and / or clogged air filters and / or low ambient temperature operation of cool mode. High temperature protection of outdoor coil when the air conditioner is operating in cool mode. This protection is only available for heat pump system. Cold draft protection when the air conditioner is operating in heat mode to prevent cold air blowing out at the beginning of heat mode which avoids the discomfort to the user. High temperature protection of indoor coil when the air conditioner is operating in heat mode. Defrost protection of outdoor coil when the air conditioner is operating in heat mode at very low ambient temperature. Smart self-diagnostic function for malfunctions detection for easy fast service and maintenance. Smart Refrigerant leak detection by sensitive sensors mounted on both indoor and outdoor coils for easy fast service and maintenance. reset internal thermal protector of indoor and outdoor fan motors to protect motor windings against excessive current. The components of both indoor and outdoor units comply with international standards of performance and safety. Min. Anti Freezing Hi Temp. Protect Cool Hi Temp. Protect Heat Motors Rev. (0) - 0
Ducted Split Systems Key Features Key Features asy Installation, Service and Maintenance (Cont.) asy Installation, Service and Maintenance Due to compact dimensions, low height and low weight, the installation of ducted indoor unit on the ceiling is faster and extremely easy. The display panel can be installed on the false ceiling to show unit operation and error code. asy removal of washable air filters for cleaning. Slim Low Height Compact Dimensions & Light Weight Size W K 0 K K 0K K K 0K Net Weight Dimensions (cm) H D.. 0.. 0 0. Min. mm Kg cm or. cm or 0 cm Remote ON / OFF Drop - Ceiling 0.. Remote ON / OFF function provides more easy central control of ducted split system. asy accessibility to motors and fans of indoor unit for easy fast service and maintenance. Flexible two directions of air return : Back air return ( factory standard ) Bottom air return ( can be done at field ). Pre-Punched Fresh air intake built in the indoor unit from both sides to make air quality more healthy and more comfortable. motor Blower housing Remote system alarm function which required for some applications such as computer rooms for fast and easy service and maintenance. Bottom Panel Remote Alarm Smart self-diagnostic function for malfunctions detection through the leds of display panel for easy fast service and maintenance. Back Return Air Bottom Return Air Optional drain pump which can lift the condensate water up to cm upmost. Optional drain pump is factory installed. Smart Refrigerant leak detection by sensitive sensors mounted on both indoor and outdoor coils for easy fast service and maintenance. cm ceiling Rev. (0) - 0 Indoor unit equipped with flange connections for both supply and return air ducts. Fresh air intake
Ducted Split Systems Wired Room Controller Wireless Remote Control ( option ) POWR Button MOD Selection Button Temperature Selection Button FAN SPD Selection Button FOLLOW M Button TIMR Button DLAY / DAY OFF Button CONFIRM Button BACK Button 0 COPY Button Display of Wired Room Controller Cool Heat SU MO TU W TH FR SA Week Day On Off MOD TIMR Fan Dry SWING SWING DLAY/DAY OFF CONFIRM BACK POWR FAN SPD FOLLOW M COPY 0 0 AUTO COOL DRY HAT AUTO COOL DRY HAT FAN Display Of Remote Control ST TMP. TIMR ON OFF FAN HIGH MD LOW Signal transmission indicator MOD indicator matic Cooling Dehumidification only Heating Ventilation (fan only) ON / OFF indicator Cool Dry Operation Mode Indicator AUTO Mode Indicator COOL Mode Indicator DRY Mode Indicator Heating Mode Indicator Display of Wired Room Controller Cool Heat Fan Dry Control Buttons MOD selection button AUTO - COOL - DRY - HAT - FAN Decrease temperature button The set temperature is decreased down to C. Increase temperature button The set temperature is increased up to 0 C. FAN selection button Low - Medium - High - fan speed LOW MD HIGH AUTO ST TMP. indicator FAN SPD indicator FAN SPD indicator LOW FAN SPD indicator MD FAN SPD indicator HIGH FAN SPD indicator AUTO TIMR ON function indicator TIMR OFF function indicator FOLLOW M function indicator Fan FAN Mode Indicator Fan speed Indicator Low Fan Speed Indicator SU MO TU W TH FR SA Week Day On Off 0 ON/OFF button Air Direction function button * Vertical Air Flow Swing * Sleep function button Medium Fan Speed Indicator TIMR ON function button High Fan Speed Indicator Fan Speed Indicator Faceplate function indicator Follow me function indicator C / F indicator Temperature display 0 Lock indicator Room temperature indicator Clock display On/Off timer Timer display 0 TIMR OFF function button My Mode function button to memorize the preferred settings Follow Me function button * Display function button TURBO function button * Note : * This function does not work with this product but works with other products Rev. (0) - 0
Ducted Split Systems Smart Self Diagnostic Function For Detection Smart Self Diagnostic Function For Detection Display of the indoor unit size Display of the indoor unit sizes --0---0 Touche d urgence Lorsqu on a perdu la télécommande, que celle-ci est endommagée ou que la batterie est à plat, la touche d urgence permet de faire fonctionner l unité. Led OPRATION ( fonctionnement ) * allumeé lorsque l unité fonctionne. Led TIMR ( temporisateur ) * allumeé en fonction temporisateur. Led DFROST / FAN ( dégivrage / ventilation ) Led DFROST ( dégivrage ) : pour l unit à pompe à chaleur. Led FAN ( ventilation ) pour l unité à refroidissement seul. Led ALARM clignote lorsque le code défaut de l unit extérieure est identifiable. Récepteur des signaux envoyés par la télécommande Affichage Le code de défaut est identifiable par l affichage Touche d urgence Lorsqu on a perdu la télécommande, que celle-ci est endommagée ou que la batterie est à plat, la touche d urgence permet de faire fonctionner l unité. Led OPRATION ( fonctionnement ) * allumeé lorsque l unité fonctionne. Led TIMR ( temporisateur ) * allumeé en fonction temporisateur. Led DFROST / FAN ( dégivrage / ventilation ) Led DFROST ( dégivrage ) : pour l unit à pompe à chaleur. Led FAN ( ventilation ) pour l unité à refroidissement seul. Led ALARM clignote lorsque le code défaut de l unit extérieure est identifiable. Récepteur des signaux envoyés par la télécommande Affichage Le code de défaut est identifiable par l affichage Self-diagnosis function of the indoor unit size Self diagnostics sizes --0---0 The fault code is identifiable by the s and the fault code Reason Temperature sensor air from the indoor unit Indoor coil temperature sensor of the indoor unit Outdoor unit coil temperature sensor Outdoor malfunction PROM malfunction Water-level alarm malfunction against over current outdoor unit against high temperature compressor against over current outdoor unit The unit is switched off by remote control Defrost heater is active OPRATION TIMR DF.FAN ALARM Code 0 P0 P The fault code is identifiable by the s and the fault code Reason Model channel is abnormal The indoor / outdoor unit communication unit Temperature sensor air from the indoor unit Indoor coil temperature sensor of the indoor unit Outdoor unit coil temperature sensor PROM malfunction Water-level alarm malfunction Outdoor unit low pressure malfunction The unit is switched off by remote control Defrost heater is active OPRATION TIMR DF.FAN ALARM Code 0 d Rev. (0) - 0 = Flash Hz = Flash Hz * = DFROST (defrost) for the heat pump unit Led FAN ( FAN ) for cooling only unit. = Flash Hz = Flash Hz * = DFROST (defrost) for the heat pump unit Led FAN ( FAN ) for cooling only unit.
Technical Specifications System type Heat Pump System size K K K 0K K K K 0K Indoor unit model QSS0NS QSS0NS QSS0NS QSS00NS QSS0NS QSS0NT QSS0NT QSS00NT Outdoor unit model QUS0NS QUS0NS QUS0NS QUS00NS QUS0NS QUS0NT QUS0NT QUS00NT Cooling capacity kw.... 0. 0..0. Btu/hr 00 000 000 0000 000 000 000 000 Input power - Cooling W 0 00 00 00 00 00 00 00 Input current - Cooling A....... 0...R. - Cooling Heating capacity W/W........0 Btu/wh....0.... kw........ Btu/hr 000 000 000 000 000 000 000 0000 Input power - Heating W 0 0 00 00 00 00 00 00 Input current - Heating A....0.... C.O.P - Heating W/W..0...... Indoor unit model QSS0NS QSS0NS QSS0NS QSS00NS QSS0NS QSS0NT QSS0NT QSS00NT Nominal air flow (high/med/low) ( @ rated external static pressure ) Indoor maximum external static pressure m /hr //00 0/0/0 0/0/ 00/00/000 00/00/00 00/00/00 00/0/00 00/0/00 cfm // // // //0 0//0 0//0 /0/ /0/ Pa 0 0 Range external static pressure Pa 0-0 0-0 0-0 0-00 0-00 0-00 0-0 0-0 Sound Pressure (high/med/low) db(a) 0// 0// // /0/ // // // // Net Dimensions (W H D) mm 00x0x 0x0x 00xx 00xx 00xx 00xx 00x00x 00x00x Weight Net Kg.. 0..... Outdoor unit model QUS0NS QUS0NS QUS0NS QUS00NS QUS0NS QUS0NT QUS0NT QUS00NT Compressor type Rotary Rotary Rotary Rotary Scroll Scroll Scroll Scroll Rev. (0) - 0 Refrigerant type / Coupler R0A / Flare Sound pressure db(a) Net Dimensions (W H D) mm 0xx00 0xx00 x0x x0x0 x0x0 x0x0 00x0x0 00x0x0 Weight Net kg..... Installation Data Pipe connection sizes ( inch ) Liquid Φ. ( / ) Φ. ( /" ) Φ. ( /" ) Φ. ( /" ) Φ. ( /" ) Φ. ( /" ) Φ. ( /" ) Φ. ( /" ) Gas Φ. ( / ) Φ. ( /" ) Φ. ( /" ) Φ.0 ( /" ) Φ.0 ( /" ) Φ.0 ( /" ) Φ.0 ( /" ) Φ.0 ( /" ) Maximum pipe length m 0 0 0 0 0 Maximum height difference m 0 0 0 0 0 Power supply V/ph/Hz 0-0//0 0-0//0 0-0//0 0-0//0 0-0//0 0-//0 0-//0 0-//0 * Cooling Capacity and nergy fficiency Ratio (R) based on ISO Standard at conditions : /ºC db/wb ambient Temperature. /ºC db/wb Indoor Temperature. High Air Flow 0 volts power supply (for sizes ---0-) Single Phase. 0 volts power supply (for sizes --0) Three Phase. * Heating Capacity and Coefficient Of Performance (COP) are based on ISO Standard at operating conditions : 0/ºC db/wb Indoor Temperature /ºC db/wb Outdoor Temperature. High Air Flow 0 volts power supply (for sizes ---0-) Single Phase. 0 volts power supply (for sizes --0) Three Phase. * Sound pressure is measured in anechoic chamber based on GB/T Standard * Carrier is committed to continuously improving its products according to national and international standards to ensure the highest quality and reliability standards, and to meet market regulations and requirements. All specifications subject to change without prior notice according to Carrier policy of continuous development.