CLIMOS / DC COMFORT VENTILATION MVHR UNIT FOR INSTALLATION IN CEILING VIOD Programmer (external) for automatic control L x W x D (mm): 8 x x control cable angle bracket (x) snap locks (x) hinges on opposite side condensate drain cover panel intake exhaust supply extract PASSIV HAUS compliant COMPONENT Dr. Wolfgang Feist Design variants exhaust exhaust intake intake Membrane keypad for manual control with week timer matching the PEHA switch programme (option) climos / DC special design supply extract extract supply climos / DC standard design PRODUCT DESCRIPTION The Comfort Ventilation unit climos is available in two specifications: climos DC and climos DC. It was specifically developed for hidden installation in false ceilings voids. Like all mechanical ventilation heat recovery units by PAUL, it features the highly efficient counter-flow channel-type heat exchanger (protected by German and European patents). Due to its flat design and its different specifications, the unit is particularly well suited for the renovation of large flats, offices etc. The concealed installation in false ceilings allows renovated structures to be provided with a comfortable ventilation system in a space-saving and visually preferable manner. For this type of application, Paul Wärmerückgewinnung GmbH can supply a service hatch tailored to the specific needs of the customer. Air flows can be varied by means of two energy-saving electronically commutated 8 VDC radial fans. The MVHR unit can be equipped with a manual control or an automatic control, depending on customer requirements. The manual control is a membrane keypad, which can be integrated into the PEHA switch system. The membrane keypad provides 7-step flow control, balancing, ing out, supply-only or extract-only (summer ventilation), filter watchdog function and automatic frost protection. An additional boost button and a week timer can be connected, and the unit can be set-up to work with fireplaces (optional extra). The automatic mode allows the flow rate to be adjusted in steps. Fan power of the steps can be varied in % increments. Moreover, the freely programmable control system makes is possible to preset operating times for ventilation at the desired rate; 8 timing programs are available. Alternatively the fan speeds can also be controlled by hand. The standard functions include filter monitoring, intake/ exhaust balancing, frost protection for downstream hot water back-up duct heater, connection of several boost switches and a special standby circuit with a power input less than W. Possible options are: constant-flow control (e.g. for fireplace mode), regulating either a ground to heat exchanger valve or a ground to brine to frost protection, controlling an electric frost protection heater, a back-up duct heater, or a heating circuit pump, and connection of several programmers. The Paul MVHR unit is a fully soundproofed and heat-insulated design with no thermal bridges. The intake is cleaned via a G filter or, optionally, F8 pollen filter. On the extract side, a G-class filter protects the MVHR unit from contamination.
climos / DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: x x Controller dimensions: L x W x D [mm]: x x 8 incl. optional frost prot. and back-up heaters: L x W x D [mm]: x x (for automatic control) supply MVHR system with 9% heat recovery in ceiling void extract Installation: horizontal, sloping (%) towards condensate drain; condensate trap Place of installation: frost free, preferably > C Duct connections: x mm in dia. intake Condensate: Material: Weight: ¾ hose connection Housing: galvanised steel plate, up to mm heat insulation, no thermal bridges, soundproofed Heat exchanger: plastic kg inspection hatch 7 x 7 mm (all sides mm larger than unit dimensions) to be provided by customer Filters: intake : G or F8 (pollen filter), extract : G exhaust Electrical connection: V, Hz; ready for connection no cable Cable lengths: power cord ( V): by customer MVHR unit to control unit: m automatic control to programmer: max. m (by customer) Picture : Installation position entry door Control: Protection: Ventilators: manual control with membrane keypad, or automatic control with programmer (climos DC only) IP (unit), IP (control) 8VDC radial fans Power input/flow/ available pressure: see charts and Heat recovery rate: approx. 8 to 98% (climos DC) approx. 8 to 9% (climos DC) Sound pressure level: climos DC acc. to DIN 7- Step 7 (-m distance in db[a]) Lp 9 8 climos DC Step 7 Lp 7 Temperature range of heat exchanger: can be used between - C and C Characteristic of climos DC step 7 step step step step step step W W W 9W 8W 7W W 7 8 9 flow rate [m /h] Chart : Characteristics for flow rate, externally available pressure and power input Summer operation: Frost protection: Back-up heating: Information: supply-only or extract-only (manual control) continuous slowing down of supply fan ) in manual control, or optional frost protection heater, or optional ground to heat exchanger ) with optional fireplace mode hot water duct heater as external unit, or electric duct heater as external unit Subject to change in the interest of technical progress. Characteristic of climos DC step 7 step step step step step step W W W W W 79W W 7 8 9 7 8 Chart : Characteristics for flow rate, externally available pressure and power input flow rate [m /h] Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
MULTI / DC COMFORT VENTILATION MVHR UNIT FOR INSTALLATION IN KITCHEN UNITS extract supply Depth of unit Programmer (external) for automatic control L x W x D (mm): 8 x x outdoor 7 exhaust 8 9 exhaust intake Designed for installation in kitchen units and boxings extract filter taper section heat exchanger snap lock intake filter fixing strap 7 8 9 duct socket (x mm) condensate drain control cable PASSIV HAUS compliant COMPONENT Dr. Wolfgang Feist Membrane keypad for manual control with week timer (option) matching the PEHA switch programme PRODUCT DESCRIPTION The multi Comfort Ventilation (MVHR) unit is available in two specifications: multi DC and multi DC. It is designed for installations in large apartments or single-family houses with a floor area of up to square metres. Due to its slim design, it can be ideally installed in kitchen units, ing cupboards and other vertical spaces. No special installation space is needed. Like all other MVHR systems by PAUL, the multi / DC unit features the highly efficient counter-flow channel-type heat exchanger (protected by German and European patents). The housing is made of galvanised steel powder coated white. Heat exchangers, fans and filters are fully embedded in plastic foam. The PAUL unit is entirely sound-proofed and heat-insulated avoiding thermal bridging. Two highefficiency electronically commutated 8 VDC radial fans provide flows of up to m³/h for the multi DC, or m³/h for the multi DC, at an externally available pressure of Pa. The Comfort Ventilation unit can have a manual control or an automatic control unit (multi DC only), depending on customer requirements. The manual control is a membrane keypad, which can be integrated into the PEHA home switch system. The sealed keypad provides 7-step flow control, boost function, supply-only or extract-only operation (for summer ventilation), intake/exhaust balancing, automatic frost protection, filter monitor function, and optional fireplace integration. Optionally, an additional boost switch and a weekday timer can be connected. The automatic mode allows the flow rate to be adjusted in steps. The fan power of the steps can be varied in % increments. The control system offers 8 independent programs allowing the user to preset different operating steps for the ventilation fans at different times during a day. The fan steps can also be controlled manually. The standard functions include filter monitor, intake/exhaust balancing, frost protection for the downstream hot water duct heater, connection of several boost switches and a special standby circuit with a power input less than W. Possible options are: constant-flow controle. g. for fireplace operation, regulating either a ground to heat exchanger or a ground to brine to frost protection, and controlling an electric frost protection heater, back-up duct heater, or heating circuit pump, as well as connection of several programmers. The intake is cleaned via a G filter or, optionally, F8 pollen filter. On the extract side, a G-class filter protects the heat exchanger from contamination. cover panel 8 8 installation clearance for snap lock Front view
multi / DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: x x 8 Control dimensions: L x W x D [mm]: x x 8 incl. optional frost prot. and back-up heaters: L x W x D [mm]: x x (for automatic control) Installation: vertical (preferred), or horizontal (sloping to condensate drain) Place of installation: frost free, preferably > C Duct connections: Condensate: Material: duct sockets x mm mm condensate hose (internal) Housing: galvanised steel, white powder coated; thermally broken heat insulation; double soundproof; Heat exchanger: plastic ext sup sup ext exh int int exh sup ext int exh int intake sup supply ext extract exh exhaust to int exh condensate drain on exhaust side sup ext design variants Weight: Filters: approx. kg intake : G or F8 (pollen filter), extract : G Electrical connection: V, Hz; ready for connection no cable Picture : Design variants condensate connection Cable lengths: Control: Protection: Ventilators: power cord ( V): by customer MVHR unit to control unit: m automatic control to programmer: max. m (by customer) manual control with membrane keypad, or automatic control with programmer (multi DC only) IP (unit), IP (control) 8VDC radial fans Power input/flow/ available pressure: see charts and Heat recovery rate: approx. 8 to 98% to TZWL (multi DC) approx. 8 to 9% (multi DC) Sound pressure level: multi DC acc. to DIN Part Step 7 (-m distance in db[a]) Lp(A)... 9. multi DC V* Lp(A). 9.. Temperature range of heat exchanger: can be used between - C and C Summer operation: Frost protection: Back-up heating: Information: with summer box, or either supply-only or extract-only (manual control) continuous slowing down of supply fan ) in manual control, or optional frost protection heating, or optional ground to heat exchanger ) with fireplace option hot water duct heater as external unit, or electric duct heater as external unit Subject to change in the interest of technical progress. * flow rate [m /h] Characteristic of multi DC step 7 step step step step step step W W W W W W W 8 flow rate [m /h] Chart : Characteristics for flow rate, externally available pressure and power input Characteristic of multi DC step 7 step step step step step step W W W W 9 W 7 W 8 W 8 8 flow rate [m /h] Chart : Characteristics for flow rate, externally available pressure and power input Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
ATMOS 7 DC PASSIV HAUS COMFORT VENTILATION MVHR UNIT IN TWO SPECIFICATIONS -step switch surface or flush mounted PASSIVE Heat recovery: HOUSE heat recovery rate compliant COMPONENT [effective]: 88% ) Dr. Wolfgang Feist Electrical efficiency:. Wh/m ) ) results may vary according to the test methods used, e. g. with or without condensation ) best efficiencies in the German market today Models Intake & exhaust duct connection side top; supply & extract duct connection side bottom [picture on the right] Intake & exhaust duct connection rear bottom; supply & extract duct connection on top [picture on the left] Membrane keypad for manual control with weekday timer (option) matching the PEHA switch programmer alternative option: system BUS actuator PRODUCT DESCRIPTION The PAUL heat recovery (MVHR) unit atmos 7 DC is designed for flows in the range between and m³/h for balanced mechanical ventilation in homes. It features a novel counter-flow channel-type heat exchanger (protected by German and European patents). The two available specifications save space and allow for optimised ducting routes. Thanks to its broad range of performance, it can be used in most types of single-family houses. This MVHR system meets the challenges of high energy efficiency and ease of use. The electronically commutated (EC) radial fans have constant-flow characteristics. They can be controlled via a three-step switch, step & step can be independently set, step being the mid point. Alternatively, the fans can be controlled by a bus system via an actuator (multiple switch output) integrated in a building automation system, or can be directly controlled via a V control signal. Another option is to use a sealed keypad providing: 7-step control of flows, intake/exhaust balancing, boost function, supply-only or extract-only (summer ventilation), automatic frost protection, and filter monitor function. An additional boost switch and a weekday timer can be connected. Negative pressure prevention for fireplaces can also be integrated. The PAUL MVHR unit is a fully soundproofed and heat-insulated design avoiding thermal bridges. It includes mm thick heat insulation with no thermal bridges. The vibration-damped electronically commutated radial fans with integrated electronics provide very low noise levels and high energy savings. Intake is cleaned via a G filter or, optionally a F8 pollen filter. On the extract side, a G-class filter protects the MVHR heat exchanger from contamination. The MVHR unit atmos 7 DC is certified to Passiv Haus standard by the Passivhausinstitut.
atmos 7 DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: x x Control dimensions: L x W x D [mm]: x x 8 Dimensioned drawing for Model Installation: Raise by to mm from floor for condensate discharge Front view without cover panel Side view from the left Place of installation: frost free, preferably > C Duct connections: Condensate: x mm in dia. ¾ hose connection (spec. ) intake 8 exhaust 7 8 7 ¾ male thread connection (spec. ) Material: Housing: galvanised steel plate, white powder coated, mm heat insulation, no thermal bridges. Heat exchanger: plastic Weight: Filters: kg Intake : G or F8 (pollen filter), Extract : Spec. : G Spec. : G Electrical connection: V, Hz, ready for connection no cable Cable lengths: Control: Protection: IP Ventilators: power cord ( V): by customer MVHR unit to controller unit: m controller unit to programmer: max. m (by customer) -step switch, or manual via membrane keypad, or actuator of BUS system EC radial fans with integrated electronics and constant-flow characteristic supply 9 Extract fan Supply fan Fresh filter Extract filter Heat exchanger Summer bypass extract 7 8 9 9 9 9 8 7 Power & control cable Control unit Condensate drain on the rear panel ¾ Hinge Snap locks Power input: W to W Flow / available pressure: see chart Heat recovery rate: approx. 8 to 9% Sound pressure level: Step (in%) acc. to DIN 7- Lp 8 7 (-m distance in db[a]) Temperature range of heat exchanger: can be used between - C and C Summer operation: Frost protection: manual summer bypass, or extract-only (manual control) optional frost protection heater optional ground to heat exchanger continuous slowing down of supply fan ) (with membrane keypad) hardware adjustable to fireplaces in case of -step switch or bus actuator control ) with fireplace option Characteristic of atmos 7 DC 9 W W 9 W W W W W 88 W W step step step step step step step 7 Back-up heating: Information: hot water duct heater as external unit electric duct heater as external unit Subject to change in the interest of technical progress. flow rate [m /h] Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
SANTOS 7 DC COMPACT COMFORT VENTILATION MVHR UNIT SANTOS F 7 DC WITH HUMIDITY RECOVERY WITH HUMIDITY RECOVERY -step switch surface or flush mounted PASSIVE HOUSE compliant COMPONENT Dr. Wolfgang Feist Sealed keypad surface or flush mounted PRODUCT DESCRIPTION The Comfort Ventilation unit santos 7 DC or santos F 7 DC is a mechanical ventilation heat recovery (MVHR) unit for use in apartments and single-family houses. Two highly efficient electronically commutated direct-current motors with high-duty impellers pass the over a counter-flow heat exchanger at a heat recovery rate of up to 9%. Optionally, the standard heat exchanger can be replaced by a membrane-based moisture-heat exchanger, which achieves up to 9% heat recovery and can reclaim a high percentage of the humidity from the extract. This is a noticeable improvement for apartments with very dry room conditions. In addition, the plate heat exchanger design with separate supply and extract flows guarantees perfect hygienic conditions. This device has a special control system that prevents overhumidification. It has G filters on the intake and extract with the option of a F7 pollen filter on the intake. The housing is made of powder coated steel. The inner lining is high-quality polypropylene for heat insulation and sound absorption. Depending on the level of configuration, the MVHR unit can be controlled by either a -step switch or by a sealed keypad. Both controls can be installed in any room regardless of where the MVHR unit is located. The ventilation levels can be varied in % increments. With the sealed keypad following additional functions can be provided: -step control of flows, supply-only or extract-only, a free programmable weekday timer and flow controls (CO, Humidity). An automatic bypass control with motorised bypass flap in association with a ground to heat exchanger ensures gentle cooling of the rooms in summer. The automatic frost protection system needs no auxiliary energy and can optionally be extended for fireplace operation via special configuration software. The duct connections are DN and the ductwork can be connected from the side or top of the unit, depending on the circumstances of installation. The condensate drain is a ¼ male thread socket located at the bottom on the left or on the right, depending on the model. THE UNIT PROVIDES BENEFITS:. More comfort by moisture recovery along with heat recovery. Heat efficiency up to 7%. Perfect hygienic plate heat exchanger. Standard heat exchanger replaceable by moisture-heat exchanger. Small number of moving parts, low rep needs. No critical response to poor maintenance 7. No risk of freezing at outdoor temperatures - C; defroster heater or ground heat exchanger can be dispensed with 8. No bad odours even after many years of service 9. Low-cost care and maintenance. Good price-performance ratio
santos 7 DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: 89 x 7 x 97 Installation: wall mount, horizontal; (bottom edge at least mm above finished floor level), or vertical on base frame 7 97 8 Place of installation: frost free, preferably > C Duct connections: x mm dia. socket size Condensate: Material: Weight: Filters: ¼ male thread Housing: powder coated steel, light grey; thermal bridge free heat and sound insulation by means of EPP foam Front cover: plastic in water blue Heat exchanger: polystyrene (standard heat exchanger) salt ion membrane (moisture-heat exchanger) 9 kg intake : G, optionally F7 extract : G 89 condensate drain right-handed design 78 78 7 condensate drain left-handed design condensate drain male thread (8x) 7 plug with earth contact Electrical connection: V, Hz; ready for connection no plug Picture : Front view / Side view from the right Cable lengths: power cord ( V): m -step switch to terminal box ( V): any (by customer) Sealed keypad to terminal box: max. m (by others) Control: Protection: IP Ventilators: -step switch or sealed keypad V DC radial fans Power input/flow/ available pressure: see chart Heat recovery rate: 9.7 % for santos 7 DC (acc. to EN 8) up to 7 % for santos F 7 DC (as referred to sensitive heat in the extract stream) Moisture recovery rate: up to % intake (extract ) exhaust (supply ) right-handed Picture : Top view supply (exhaust ) extract (intake ) (left-handed) Sound pressure level acc. to DIN EN ISO 7-: V* 7 (,m distance in db[a]) Lp 9 8 Temperature range of heat exchanger: can be used between - C and C Summer operation: Frost protection: Back-up heating: motorized summer bypass frost protection circuit based on intake flow reduction (no auxiliary energy), fireplace option, or frost protection heater, or ground to heat exchanger hot water duct heater as external unit, or electric duct heater as external unit Characteristic of santos 7 DC 7 8 W W 9 W % 9 % W 7 % W % W W % W W W Information: Subject to change in the interest of technical progress. * flow rate [m /h] Chart : Characteristics for flow rate, externally available pressure and power input flow rate [m /h] Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
THERMOS / DC PASSIV HAUS COMPLIANT MECHANICAL VENTILATION HEAT RECOVERY UNIT installation clearance installation clearance 9 supply 8 7 extract Comfort Panel for automatic control L x W x D (mm): 8 x x exhaust intake connections duct connections from side or rear extract filter connecting terminals heat exchanger intake filter terminal box motorised bypass valve 7 8 summer bypass bypass shut-off insert PASSIVE ) Heat recovery: HOUSE heat recovery rate certified COMPONENT ) ) [effective]: 9% Dr. Wolfgang Feist Electrical efficiency:. Wh/m ) results may vary according to the test methods used, e. g. with or without condensation ) best efficiencies in the German market today ) certificate refers to thermos DC PRODUCT DESCRIPTION The PAUL heat recovery unit thermos / DC is used for balanced mechanical ventilation in homes and uses a highly efficient counter-flow channel-type heat exchanger (protected by German and European patents). The heat exchanger has a heat transfer surface area of m; this is more than twice that of the other commercially available units. The thermal efficiency of this exchanger is much higher than that of conventional cross-flow plate heat exchangers. The thermos unit is offered in two specifications according to the power of the ventilation fans (charts and ). The high-efficiency electronically commutated radial fans with integrated electronic power control provide an excellent cost/benefit ratio of : to (e.g. for thermos DC: electric power input W, heat recovery 97 W @ - C intake temperature). The programmer allows the flow rate to be regulated in steps. The fan power of the steps can be varied in % increments. The programmer functions are: 8 independent timing programs with weekday timer for presetting the operating times and power setting of the ventilation fans, control of the motorised summer bypass valve, intake/exhaust balancing, filter monitor function, frost protection for downstream hot water duct heater, potential to connect several boost switches and a standby circuit with a power input of less than W. Optional features are: controlling a frost protection pre-heater, regulating a ground to heat exchanger or a ground to brine to frost protection, a heating circuit (e. g. heating circuit pump or electric back-up heater up to. kw), and addition of several boost switches. The PAUL MVHR unit is a fully soundproofed and heat-insulated design. The entire housing is made of EPP foam (no sheet metal parts) and thus contains no thermal bridges (utility model protection)! The intake is cleaned via a G filter, or optionally via a pollen filter (F8). On the extract side, the unit is protected from dirt and contamination by a G filter. The MVHR unit thermos / DC is designed for the use in residential buildings, especially in low-energy and Passiv Haus buildings, and can also be used in nurseries, schools, retirement homes, offices etc. Assembly clips Assembly clips Ø Access panel for exhaust fan SUP EXT EXH INT Access panel for supply fan Condensate outlet, G Rear view of MVHR unit
thermos / DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: x x Control dimensions: L x W x D [mm]: x x 8 incl. frost protection and back-up heating options L x W x D [mm]: x x Installation: Raise by to mm from floor for condensate discharge Place of installation: frost free, preferably > C Duct connections: Condensate: Material: Weight: Filters: x mm dia. G ¾ condensate connection Housing: EPP foam, up to 8 mm thick, heat-insulated and soundproofed Heat exchanger: plastic approx. kg Intake : G or F8 (pollen filter), extract : G heat recovery index [%] Characteristic of thermos DC and thermos DC 99 98 97 9 9 9 9 7 7 7 Measured at to % relative humidity in the extract (TZWL Dortmund) Chart : Heat recovery efficiency flow rate [m /h] Electrical connection: Cable lengths: Control: Protection: Ventilators: single-phase V, Hz,or three-phase x V, Hz for operation of two back-up heaters (frost protection heater and electric duct heater) ready for connection no plug-in power cord ( V): by customer MVHR unit to control unit: m automatic control to programmer: max. m (by customer) automatic control with programmer IP (unit) IP (control) 8VDC radial fans with integrated electronics Characteristic of thermos DC 9 W W W 9 W 7 W W W W 7 W W W W W W W flow rate [m /h] Power input/flow/ available pressure: see charts and Heat recovery rate: approx. 97 to 99%, see chart (according to TZWL) Sound pressure level: Step DC DC acc. to DIN Part 8% 8 (-m distance in db(a)) % Temperature range of heat exchanger: can be used between - C and C Summer operation: Frost protection: Back-up heating: Information: motorised bypass valve optional frost protection heating, or optional ground to heat exchanger hot water duct heater as external unit, or electric duct heater as external unit Subject to change in the interest of technical progress. Chart : Characteristics for flow rate, externally available pressure and power input Characteristic of thermos DC 9 W W W W W W W W W 8 W 8 W W W W Chart : Characteristics for flow rate, externally available pressure and power input flow rate [m /h] Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
CAMPUS DC COMFORT VENTILATION MVHR UNIT FOR LARGE AIR FLOWS Programmer for automatic control L x W x D (mm): 8 x x Membrane keypad for manual control with weekday timer (option) within the PEHA switch programme PASSIVE HOUSE compliant COMPONENT Dr. Wolfgang Feist alternative: system bus actuator PRODUCT DESCRIPTION The campus DC is a mechanical ventilation heat recovery (MVHR) unit for ventilation systems with flow rates of up to m³/h. Like all Comfort Ventilation units by PAUL, it features a highly efficient counter-flow channel-type heat exchanger (protected by German and European patents). The unit is particularly well suited for the ventilation of large single-family houses, schools, nurseries, restaurants, offices or other public facilities. Two energy-saving electronically commutated 8 VDC radial fans are used to convey flows of up to m³/h at an externally available pressure of Pa. The Comfort Ventilation unit can be operated via a membrane keypad (manual control), a programmer (automatic control), or actuators (power pack only) of a freely selectable building bus system. In the automatic mode, the flow rate can be adjusted in steps. Fan power for the steps can be varied in % increments. Further possible features are: filter monitor function, intake/exhaust balancing, constant-flow control, e.g. for fireplace compliance (optional), and regulating a ground heat exchanger valve, controlling a motorised bypass valve, a frost protection heater, a back-up duct heater, or a heating circuit pump. The control system offers 8 independent programs allowing the user to preset different operating steps for the ventilation fans at different times during a day. Manual control of the ventilation steps is also possible. A special (optional) standby circuit limits the power input in the standby mode to less than W. The membrane keypad provides: 7-step control of flows, boost operation, intake/exhaust balancing, supply-only or extract-only operation (summer ventilation), automatic frost protection and filter monitor function. Optionally, an additional boost switch and a weekday timer can be connected, and the unit can be adapted to fireplaces. A bypass shut-off insert for summer operation is standard equipment. The PAUL MVHR unit is a fully soundproofed and heat-insulated design with no thermal bridges. The intake is cleaned via a G filter or, optionally, via an F8 pollen filter. On the extract side, a G-class filter protects the heat exchanger from contamination.
campus DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: 8 x 8 x 78 Controller dimensions: L x W x D [mm]: x x 8 incl. optional frost prot. and back-up heaters: L x W x D [mm]: x x Installation: raise by to mm from floor for condensate discharge Place of installation: frost free, preferably > C Duct connections: Condensate: x mm in dia. ¾ hose connection intake Dimensions Front view without cover panel exhaust Side view from the left 8 8 Material: Housing: galvanised steel plate, white powder coated, mm heat insulation, no thermal bridges Heat exchanger: plastic 7 8 Weight: kg Filters: Electrical connection: intake : G or F8 (pollen filter), extract : G single-phase V, Hz,or three-phase x V, Hz for operating two extra heaters (frost protection heater and electric duct heater automatic control only) ready for connection no plug-in supply 8 9 extract 9 9 8 78 Cable lengths: Controls: Protection: Ventilators: power cord ( V): by customer MVHR unit to control unit: m automatic controller to programmer: max. m (by customer) automatic controller with programmer manual control with membrane keypad, or actuator of bus system IP (MVHR unit) IP (control unit) 8VDC radial fans 7 Extract fan Supply fan Fresh filter Extract filter Heat exchanger Bypass shut-off insert Motorised bypass valve 8 Power & control cable on the rear panel 9 Condensate drain on the rear panel Snap lock (x) Terminal box all duct connections: DN Power input/flow/ available pressure: see chart Heat recovery rate: approx. 8 to 9% Sound pressure level: Step 8 acc. to DIN 7- Lp..7 9.7 (-m distance in db[a]) Temperature range of heat exchanger: can be used between - C and C Summer operation: Frost protection: Back-up heating: summer bypass, manual or motorised (automatic control), extract-only (manual control) continuous slowing down of supply fan ) in manual control, or optional frost protection heater, or optional ground to heat exchanger ) with fireplace option hot water duct heater as external unit, or electric duct heater as external unit Characteristic of campus DC st. 7 app. 9-% st. app. 8% 8 W W st. app. 7% 7 W st. app. % 9 W st. app. % 7 W st. app. % 9 W W st. app. % 9 W 77 W W W 87 W W W flow rate [m /h] Chart : Characteristics for flow rate, externally available pressure and power input Information: Subject to change in the interest of technical progress. Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
VENTOS DC STAND-ALONE COMFORT VENTILATION MVHR UNIT Membrane keypad for manual control integrated flush with surface in housing top External programmer with weekday timer matching the PEHA home switch program (option) Models ) Single-room unit standard model (upper picture) ) Ductable unit special model (lower picture) PRODUCT DESCRIPTION The Comfort Ventilation unit ventos DC was specifically developed for decentralised mechanical ventilation heat recovery (MVHR). Like all PAUL Comfort Ventilation systems, it features the high-efficiency counter-flow channel-type heat exchanger (protected by German and European patents). It is particularly well suited for the renovation of apartments, offices etc Due to its functional design, it can be used either as a single-room unit (model with ventilation grilles) or can be ducted (housing design with duct sockets) as stand-alone ventilation of annexed rooms. Preferably, the unit is mounted to the inner face of an exterior wall; the customer simply needs to provide two holes with a diameter of mm. The visually appealing radiator-style design makes it ideal for surface mounting or the unit can be recessed into the wall with just the cover panel visible. The two highly efficient electronically commutated 8 VDC radial fans can be varied in 7 steps by means of a membrane keypad. Further functions of the user-friendly control system are intake/exhaust balancing, supply-only or extract-only operation (summer ventilation), automatic frost protection, filter monitoring, and condensate monitoring. Optionally, the control can connected to a weekday timer in association with an external programmer. The PAUL Comfort Ventilation unit is a fully soundproofed and heatinsulated design without thermal bridges. A G filter, or optionally F8 pollen filter, cleans the intake. On the extract side, a G filter protects the unit from dirt and contamination.
ventos DC TECHNICAL DATA Distributed by: Dimensions: W x D x H [mm]: 8 x 7 x 8 Installation: horizontal, wall mount Place of installation: frost free, preferably > C Grilles: Duct connections: supply : front panel; extract : right-hand side (standard model) x mm dia. for intake and exhaust alternative ducting: optionally sockets for supply and extract mm dia. (see picture ) supply Side view from the right Front view (standard model with grilles) 8 7 7 extract a 7 supply a extract channel (by customer) e.g. for extract exhaust intake power cord 8 supply a exhaust Ventilation hole for control system intake 7 extract a extract grille S Condensate: Material: Weight: Filters: Electrical connection: Cable lengths: Condensate pan with integrated liquid level sensor (indication on programmer display) and x mm condensate hose (can be connected to the sewer via a dry trap by customer) Housing: galvanised steel, white powder coated; thermal bridge free heat insulation, soundproofed Heat exchanger: plastic kg intake : G, or F8 (pollen filter) extract : G V, Hz; plug-in Power cord ( V):. m *) Picture : Dimensions construction foam exterior wall of building intake & extract through wall x dia. condensate pan drain cock condensate connection / *) all connections mm in diameter *) sewer discharge via U bend trap (customer) or manual drain into a recipient *) appropriate seal (customer) to residential rooms prevents water condensation on ducting S standard a alternative Control: Protection: IP Ventilators: Power input: Manual control via membrane keypad 8VDC radial fans to kw Flow rate / available pressure: see chart Heat recovery rate: approx. 8% @ m /h Sound pressure level acc. to DIN EN ISO 7-: Step 7 (-m distance in db(a)) Lp Temperature range of heat exchanger: can be used between - C and C Summer operation: supply-only or extract-only living room downsts extract kitchen downsts Characteristic of ventos DC bedroom upsts supply store room Picture : Solution for partial ventilation with short ducting supply exhaust intake decentralised MVHR unit for partial ventilation of rooms! Frost protection: Back-up heating: Information: continuous slowing down of supply fan hot water duct heater (duct model only) electric duct heater (duct model only) Subject to change in the interest of technical progress. W 7 7 W step 7 (max) step W 7 step W step (min) W W W W 8 flow rate [m /h] Chart : Characteristics for flow rate, externally available pressure and power input Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net
COMPAKT DC HEAT RECOVERY VENTILATION UNIT WITH INTEGRATED HEAT PUMP FOR VENTILATION, HEATING AND HOT WATER SUPPLY External programmer with room temperature sensor dimensions (LxWxD in mm): x7x Touch screen directly at Compakt unit dimensions (WxH in mm): 9x PRODUCT DESCRIPTION The compakt DC MVHR unit in connection with the PAUL heat accumulator forms a complete system for ventilation, heat and hot water supply in Passiv Haus and low-energy houses. The ventilation module of the unit supplies fresh into the building and extracts the stale. The intake is in is passed through a ground to heat exchanger, in order to preheat the intake in winter and provide gentle cooling in summer. A ground to heat exchanger bypass valve allows for direct fresh inflow. The heat pump module is an to water heat pump. Its smoothly running fully hermetic low-wear scroll compressor generates the heat transferred to the accumulator by means of water as thermal transfer fluid. The accumulator module is a non pressurised hot water tank design. It provides heat storage for both heat and hot water supply. Optionally, it can be equipped with a stainless steel corrugated tube heat exchanger for use of solar thermal energy and with an electric emersion heater. The compact unit includes a microprocessor control unit for fully automatic regulation. It has controls directly on the unit as well as an external programmer. The compakt MVHR unit is available in a right-handed or left-handed design. PAUL MICROPROCESSOR CONTROL FEATURES constant-flow regulation of ventilation fans ventilation steps, continuously adjustable in % increments ventilation time programs, freely programmable, for normal and holiday operation boost function with adjustable duration filter replacement indication (monitor) fully automatic regulation of summer bypass valve recording of temperature in ground to heat exchanger fully automatic regulation of ground to heat exchanger bypass valve regulation of electric frost protection heater heat pump regulation with automatic thawing function and starting current limitation automatic room temperature regulation weather dependent heating circuit control with freely adjustable night-time reduction speed-controlled outputs for circulation pumps control of flow limitation valve for hot water duct heater heating of supply with temperature limitation regulation of hot water / accumulator temperature with reduction mode quick charging control for accumulator automatic start of electric emersion heater with dynamic control solar control with variable-speed pump output dialogue-type clear text display self-diagnostics and system test manual program for testing of all inputs and outputs (service level) selectable indication of measured and controlled values statistics for all switching processes and operating modes printer output for data reports (RS serial) port for large displays for presentations PC connection for archives (VISUAL )
compakt DC TECHNICAL DATA Distributed by: Unit dimensions: H x W x D [mm]: 8 x x 8 Dimensions: Installation: floor Place of installation: frost free, preferably > C Front view Rear view Duct connections: supply/extract DN intake/exhaust DN ground to heat exchanger DN Condensate: Material: Weight: Filters: Electrical connection: ½ hose connection Housing: galvanised steel plate, grey powder coated, no thermally bridges Heat exchanger: plastic mm heat insulation approx. kg intake : EU or EU7 (pollen filter) extract : EU three-phase connection (/N/PE, VAC/Hz, xa) ready for connection no cable 9 Front panel with operator display 7 7 8 (adjustable in height) Rear panel with cover plate Cable lengths: power cord ( V): by customer automatic control to programmer: max. m (by customer) Control: PAUL microprocessor control Side view from the left Side view from the right Protection: IP Ventilators: Performance data Ventilation/heat recovery: Heat pump: 8VDC radial fans supply/extract flow rate: 7 to m /h @ Pa (external) fresh/exhaust flow rate: 9 m /h heat recovery rate > 9% (7 C intake; C exhaust, m /h) fan power: 8 W @ m /h rated for 9 m³/h intake/exhaust flow A/ A/ A7/ A7/ W W W W Heating power (kw):.9.9.. COP:.7.9.. Power input (kw):.... coolant: R 7 C max. inlet temperature: C 7, 8 9 7 7 89, Ventilation grill for control system Cable gland xpg, xpg, 7xPG Ventilation grill for control system Heat pump flow internal thread Heat pump return internal thread Exhaust DN condensate drain hose connection 7, ground heat exchanger DN intake DN Temperature limits: - C to C Frost protection: Back-up heating: optional ground to heat exchanger optional frost protection heater kw hot water or electric duct heater (on request) Top view extract DN supply DN Heating: panel or heating with heating water from PAUL heat accumulator 8 Hot water tank: PAUL heat accumulator ( L, non-pressurised) hot water heater SS corrugated tube heat exchanger for use of solar energy (option) Emersion heater in accumulator (by customer): Summer operation: to kw in addition to heat pump output (optional) motorized summer bypass 7 8 Information: The compakt DC unit has a footprint of x 8 cm without connections. It has adjustable feet for height adjustment between 77 and 8 cm without connections. Additional space is required for connections to sides and top of the unit of around cm. However, space requirements will depend on local conditions and should be checked on a case-to-case basis. For further dimensions, refer to the dimensioned drawings. Environment award Innovation awards European and German patents Product of the Year award First Passiv Haus certified MVHR system Environment Oscar award INTEC award for Saxony PAUL Comfort Ventilation obtained innovation awards both on the German state and Saxon regional levels, and received the German Environment Award (European-wide competition), as well as the Product of the Year and Environment Oscar awards. PAUL offers equipment for controlled residential ventilation with efficiencies of up to 99% groundbreaking in the industry. Our motto is New ideas in ventilation for fresh and healthy in homes with energy saving systems for safeguarding the integrity of the environment. Paul Wärmerückgewinnung GmbH August-Horch-Str. 7 8 Reinsdorf Germany Tel. +9() 7- - Fax +9() 7- - E-Mail: info@paul-lueftung.de Internet: www.paul-lueftung.net