Heaters & Accessories
Baseboard Heaters Marley 2500 Series - Electric Baseboard Heater Easily installed without disassembly. Designed for quiet operation no popping and pinging normally associated with baseboard heaters. Built-in safety thermal cut-off protection. Easy out knockouts at each end for convenient wiring. Knockouts inside wiring compartment allow field installation of optical raceway kit from end to end, forming UL listed wiring. UL listed for installation on wall at floor level with wall-to-wall carpeting. Heater stands unsupported during installation. Navajo White or Northern White durable textured polyester powder coat finish. Pre-notched mounting guide marks for fast and easy installation without disassembling the unit. Built -in cable clamp in both wiring compartments to restrain incoming cables without using additional hardware. Product Color Volts Watts Length MLY2514W White 120 1000 4 MLY2542-6W White 240/208 500/376 2 6 MLY2543W White 240/208 750/564 3 MLY2544W White 240/208 1000/752 4 MLY2545W White 240/208 1250/940 5 MLY2546W White 240/208 1500/1128 6 MLY2548W White 240/208 2000/1504 8 Markel 2900HA Series Electric Baseboard - High Altitude Convection Heater Available in white or ivory with Aluminum heating element and Aluminum fins. Painted 22 gauge steel front with 20 gauge junction boxes located on each end of the heater - junction boxes contain quick connect cable clamps and 6 ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Optional enclosed conduit wireway available. Heater can be mounted to the wall by using the key hole knockouts every 4 at the back of the heater. Optional In-Built thermostats field installed in the junction box. Height: 6 Depth: 2-1/2 Product Color Volts Watts Length MRKH2905028S Ivory 240/208 500/375 28 MRKH2905028SW White 240/208 500/375 28 MRKH2906036SW White 240/208 600/450 3 MRKH2907040S Ivory 240/208 750/563 40 MRKH2910048S Ivory 240/208 1000/750 4 MRKH2910048SW White 240/208 1000/750 4 MRKH2912060S Ivory 240/208 1250/938 60 MRKH2912060SW White 240/208 1250/938 60 MRKH2915072S Ivory 208/240 1500/1125 6 MRKH2915072SW White 208/240 1500/1125 6 MRKH2920096S Ivory 208/240 2000/1500 8 MRKH2920096SW White 208/240 2000/1500 8 MRKH2925120S Ivory 208/240 2500/1875 10 2
QMark HBB Series - Electric Hydronic Baseboard Heater A sheathed electric heating element is totally immersed in a heattransfer liquid and sealed in a heater-length copper tube. The large diameter reservoir maximizes the volume of heat storage fluid to prolong the thermal constant of the entire heater. Gentle heat keeps radiating even after the thermostat turns off because of the hydronic elements retention qualities. Go anywhere design: The entire unit mounts flush to any wall and flat on any floor - wood, carpet or tile. The trim, three-inch thick functional design and low operating temperatures allow carpeting to be installed up to and around the baseboard. Quality inside and out: Heavy-duty welded steel louvered grilles discourage insertion of foreign objects and direct heat outward into the room. Designer-style junction boxes are made of high-strength Lexan to resist scratches and wear marks. Built-in cut-off automatically shuts down the heater should any overheating occur. Heater has a durable textured polyester powder coat finish for corrosion resistance. Product Color Volts Watts Length QMKHBB504 White 240/208 500/375 28 QMKHBB754 White 240/208 750/563 34 QMKHBB1004 White 240/208 1000/750 46 QMKHBB1254 White 240/208 1250/938 58 QMKHBB1504 White 240/208 1500/1125 70 QMKHBB2004 White 240/208 2000/1500 94 Industrial Infrared Heaters QMark BRM Series Heavy-duty u-bend metal sheath heating elements Electric heaters convert energy to heat at 100% efficiency UL listed and CSA registered models 2.0, 4.5, 6.0 & 13.5 Kw heat outputs available Heater has gasketed wiring compartment that allows units for wash down Optional safety grilles are available Product Phase Volts Watts QMKBRM2041 1 480 2,000 QMKBRM6043 1 and 3 480 6,000 QMKBRM13543 1 and 3 480 13,500 Product QMKBRM135 Description Rollaround Cart kit for 13.5KW BRM heaters (Includes safety grilles) Portable Heaters Marley MCM - Portable Fan-Forced/Radiant Utility Heater Three heat settings: 600W radiant, 900W fan forced, 1500W fan forced and radiant. Chromed safety grille Automatic thermostat Ceramic core element Tip over safety switch and thermal limit Grounded Plug & Cord Product Volts Watts Amps MLYMCM1503 120 600/900/1500 12.5/7.5/5 3
Portable Heaters Marley FBE - Portable Electric Convector Heater Don t waste energy and heat rooms you aren t using. Maintain individual room control with portable electric convector heat - get heat only in the places you want. 100% energy efficient. Heat is dissipated by large fins into a strong convection flow. This delivers every bit of available heat. Distinctively designed. High-impact Lexan end panels with builtin handles. Low profile design enhances the unique appearance and add to the units overall stability. Fills entire room with even comfort. No cold spots. No hot spots. The complete heating cycle fills your entire room with uniform, gentle floor-to-ceiling warmth and comfort. Safety thermal cutout protection. Linear high temperature cutout safety checks the entire length of heater and will automatically shut off heater and will automatically shut off heater in the event of accidental air blockage 2-year limited warranty. Product Volts Watts MLYFBE15002 120 1000/1500 Marley MMHD - Portable Fan-Forced Utility Heater Two heat settings for a full range of comfort Automatic thermostat Fan only feature to circulate air during non-heating periods Tip over safety switch and thermal limit Polarized cord and plug (MMH) Grounded Cord & Plug (MMHD) Safety buzzer Product Volts Watts Amps MLYMMHD1502T 120 1500/1300 12.5/10.8 Marley QPH4A - Portable Unit Heater Easy to carry with built-in handles Two heat settings : 2667 Watts (9100 BTUs), 4000 Watts at 240V (13650 BTUs). Permanently lubricated, unit-bearing fan motor. Three-way bracket lets you stand unit on floor or other flat surface, or mount on ceiling or wall. Adjustable thermostat to maintain heating comfort levels. Operates on 240 volts. Comes with 6 cord. 5-year-limited warranty on heating elements. Product Volts Watts Amps MLYQPH4A 240/208 16.7/14.1 Low - 2667/2000 High - 4000/3000 20 20 4
Markel 188 Series 120 Volt Milk-house Style Fan Forced Portable Heater 1300W & 1500W heat settings plus fan only setting Temperature control thermostat 6 long - 3 conductor cord Triple safety system: Tip over switch Automatic reset type limit control Thermal cut-off device Width: 10 Height: 16 Depth: 9-1/2 Product Phase Volts Watts Amps MRK188TASA 1 120 1500/1300 12.5/10.8 Markel 198 Series 120 Volt Radiant and/or Fan Forced Portable Heater 3-Heat settings: - 600 Watt radiant - 900 Watt fan forced - 1500 Watt radiant & fan forced Temperature control thermostat Dual safety system: - Tip over switch - Manual reset type limit control 6 long - 3 conductor cord 1 year limited warranty Width: 11 Height: 15 Depth: 12 Product Phase Volts Watts Amps MRK198TMC 1 120 1500/900/600 12.5/7.5/5 Markel 474 Series 240 Volt Dual Heat Fan Forced Portable Heater 2000W & 4000W heat settings Temperature control thermostat Manual reset type limit control 6 long - 3 conductor cord Width: 16 Height: 16 Depth: 8-1/2 Product Phase Volts Watts Amps MRKH474TMC 1 240 4000/2000 16.6/8.3 Markel 680 Series Bulldog 240/208 Volt Fan Forced Portable Unit Heater Operates on 240V or 208V Finned steel tubular heating element Internal manual reset thermal cut-out 6 long cord with molded plug Temperature control thermostat with 35 F to 85 F range 10 air throw - 262 CFM Width: 13 1/2 Height: 17 1/2 Depth: 11 1/2 Product Phase Volts Watts Amps MRKHF686TC 1 240/208 5600/4200 23.4/20.2 5
Thermostats Marley Snap Action Line Voltage Thermostat Bi-metal snap action thermostats are sensitive Large knob allow for easy adjustment Product Color Volts Amps Temp. Rating Description MLYM601W White 277/240/208/120 18/22/22/22 45º F to 75º F Single Pole MLYM602W White 277/240/208/120 Has Positive OFF 18/22/22/22 45º F to 75º F Double Pole Marley Snap Action Line Voltage Thermostat These economy thermostats are the snap action type that are used in apartment construction. Good thermostat for its value. Ideal for radiant cove heaters and baseboard. Product Color Volts Amps Temp. Rating Description MLYMS26 White 277/240/208/120 18/22/22/22 50º F to 80º F Single Pole MLYMD26 White 277/240/208/120 Has Positive OFF 18/22/22/22 50º F to 80º F Double Pole Marley Snap Action With Heat Anticipator Line Voltage Thermostat Line voltage thermostat with everything; Performance, reliability, durability, and a large knob. Built-in heat anticipation assures close temperature regulation. Large knob for easy rotation. Product Color Volts Amps Temp. Rating Description MLYT200 White 277/240/208/120 18/22/22/22 50º F to 90º F Double Pole Marley Single Pole Low Voltage Thermostat Line Voltage Thermostat for 2500 Series Q-Mark Baseboard Heater Product Color Volts Amps Temp. Rating Description MLYTA1AW White 277/120 22 40º F to 100º F Single Pole MLYTA2AW White 277/120 22 40º F to 100º F Double Pole Markel 2000 Series Line Voltage Thermostat White or Ivory Single pole and double pole Heat Only DP models include positive off 22 Amps, 277 Volts AC Product Color Volts Amps Description MRKS2022H10AA White 277 22 Single Pole MRKS2022H10AB Ivory 277 22 Single Pole MRKD2022H10BA White 277 22 Double Pole MRKD2022H10BB Ivory 277 22 Double Pole Markel Replacement thermostat for HF3300 Series 6 Product Volts Amps Description MRK60048010 277/120 22 Single Pole
Qmark Unit Mount Thermostat for HBB Series Baseboards Double pole thermostat snap action type, for use with QMark HBB as well as commercial electric baseboard heaters. Field installed in junction box. Product Color Volts Amp Description QMKHBBT2 Neutral 277/120 22 Double Pole Qmark Thermostat Kit Product Temp. Rating Description QMKUHTA1 60º F to 120º F Single Pole QMKUHTA2 60º F to 120º F Double Pole Qmark Thermostat Kit for IUH Series Heaters Product Temp. Rating Description QMKIUHTA1 60º F to 120º F Single Pole Industrial Heaters QMark HUH - Industrial Horizontal Unit Heater Auxiliary, supplementary or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stockrooms, offices, workshops, toll booths, closing offices, large or exposed areas or additions All motors and contactor coils are 240 volt and operate on the secondary of a factory-installed step-down power transformer on 480 and 600 volt heaters so a separate fan and motor control power source is not needed. Steel fins are copper brazed to low watt density, steel-sheathed tubular heating elements. Fins and elements are arranged in a uniform grid pattern and fit closely into the air discharge area to assure that all incoming air passes through the heating element. Element is finished with aluminized paint for corrosion resistance. Uniform discharge of all heated air lowers internal operating temperatures and prolongs element life. A high-limit cutout automatically shuts off current in the event of overheating and reactivates the heater when temperature returns to normal. 5KW and 7.5KW heaters can be used in horizontal or vertical position. Heaters come equipped with ceiling mounting bracket for horizontal or vertical flow mounting or any position in between. Cabinet is finished with a polyester powder coating for excellent corrosion resistance. The finished color is neutral grey. Automatic control delays fan action until heating element is warm. When thermostat is satisfied, fan continues to operate until heating element is cool. By preventing circulation of cold air and expelling excess heat, comfort level is raised and component life is extended. Product KW Capacity Threaded Phase Fan Motor Volts Heater Volts Heater Amps Cont. Ckt. HP or Watts QMKHUH524SA 5 1 and 3 240 240 24 6W 270 Air Temp. CFM 7
QMark IUH - Industrial Horizontal Unit Heater Applications include primary, supplementary or auxiliary heat source in factories, stores, warehouses, public buildings, service stations, workshops, large or exposed areas or additions All motors and contactor coils are 240 volt and operate on the secondary of a factory-installed step-down power transformer on 480 and 600 volt heaters so a separate fan and motor control power source is not needed. Steel fins are copper brazed to low watt density, steel-sheathed tubular heating elements. Fins and elements are arranged in a uniform grid pattern and fit closely into the air discharge area to assure that all incoming air passes through the heating element. Element is finished with aluminized paint for corrosion resistance. Uniform discharge of all heated air louvers internal operating temperatures and prolongs element life. A high-limit cutout automatically shuts off current in the event of overheating and reactivates the heater when temperature returns to normal 5kW and 7.5kW heaters can be used in horizontal or vertical position. Heaters come equipped with ceiling mounting bracket for horizontal or vertical flow mounting or any position in between. Epoxy paint finish. Cabinet is finished with an epoxy coating for excellent corrosion resistance. The finished color is neutral grey. Product KW Capacity Threaded Phase Volts Heater Volts Fan Motor Amps Cont. Ckt. HP or Watts QMKIUH1024 10 1 and 3 240 240 25.7 1/10 HP 270 8 QMKIUH1048 10 1 and 3 240 480 12.8 1/10 HP 500 8 QMKIUH1524 15 1 and 3 240 240 37.7 1/10 HP 750 11 QMKIUH1548 15 1 and 3 240 480 19 1/10 HP 750 11 QMKIUH2048 20 1 and 3 240 480 24.8 1/10 HP 1000 13 QMKIUH3048 30 3 240 480 36.9 1/3 HP 1800 15 QMKIUH524 5 1 and 3 240 240 13.8 6.0W 270 8 QMKIUH548 5 1 and 3 240 480 6 6.0W 270 8 QMKIUH724 7.5 1 and 3 240 240 18.1A 6.0W 270 8 QMKIUH748 7.5 1 and 3 240 480 9 6.0W 270 8 QMark MUH Series Unit Heater Mounts either on the wall or from the ceiling. The MUH-35 can be used for primary or spot heating. For factories, garages, schools, etc. Airflow can be directed horizontally, vertically or any position between for the precise control. Multiple wattage heat selector switch. Either 5kW or 3.3kW @ 240V (3.75kW or 2.5kW @ 208V) for just the right amount of heat. Fan only switch allows fan to cycle automatically with elements or run continuously for air movement when no heat is required. Built-in bi-metal thermostat. Range 40º to 90ºF. Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation. Specially designed venturi outlet to meet that added throw as required in vertical position. Automatic reset linear thermal cutout capillary type, provides protection over entire length of element area. Product Volts Watts Amps QMKMUH35 240 5000/3333 21/14 CFM Height 8
QMark MUH Series Horizontal / Downflow Unit Heater Unit mounts either horizontally or vertically. Totally versatile. For factories, warehouses, garages, stores, shipping rooms, power stations, aircraft hangers, etc. Can be used for primary, supplemental, spot or dual-system heating. Wide range of optional control kits are field installable, increasing the MUH adaptability to the specification market. Forced air unit heater with 10 power ratings; from 3kW to 50kW heating output; 208, 240, 277 and 480V; 10,230 to 170,500 BTU/hr. 32 compatible models (no need to try to assemble a heating system from 70 or 80 models). Heavy gauge die-formed steel housing. Two-toned smartly styled. Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation. Specially designed venturi outlet to meet that added throw as required in vertical position. Branch circuit fusing (when required). 1 or 3-phase wiring on 5 through 10kW 208/240V and 15kW 208V units (field interchangeable). 24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3kW and 5kW 208-277V, have line voltage controls as standard (24V control available on made-to-order basis). Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis). 2-speed fan selector switch (25 to 50kW models). Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off. Individually adjustable discharge louvers to control air flow. Product KW Phase Volts Amp (3) Volt (1) CFM (2) Volts QMKMUH0521 3.7/5.0 1-3Ø 208/240V 18/21 208/240 350 208/240 QMKMUH102 7.5/10.0 1-3Ø 208/240V 36/42 24 650 208/240 QMark MWUH Series Horizontal / Downflow Unit Heater Auxiliary, supplementary, or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stockrooms, offices, workshops, toll booths, closing offices, large or exposed areas or additions.# Heater comes equipped with ceiling mounting bracket for horizontal or vertical flow mounting or any position in between. Built-in single pole thermostat adjusts from 45º to 135ºF. Automatic control delays fan action until heating element is warm. When thermostat is satisfied, fan continues to operate until heating element is cool. By preventing circulation of cold air and expelling excess heat, comfort level is raised and component life is extended. A high-level cutout automatically shuts off current in event of overheating and reactivates the heater when temperature returns to normal. Dimensions are 14 wide, 12-1/2 tall and 11-1/4 deep. Product Volts Watts Amps QMKMWUH5004 240V 5000/4165 20.8/17.4 9
Wall Heaters QMark GFR Series - Fan-Forced Wall Heater Dual Protection: Thermal cutout with indicator light and one time thermal fuse. Tangential blower for whisper quiet operation. Sienna White baked enamel finish. Commercial grade element assures long life. Three piece construction for ease of installation. Permanently lubricated, dust protected bearings. Fast heat response, contemporary design and very quiet operation make GFR Series fan-forced heaters ideal for bedrooms, dens, basements, converted attics, breezeways, garages, bathrooms, small offices, workshops and other similar areas. Also adaptable to multiple installations in somewhat larger or odd shaped rooms. CLIP-N-FIT FEATURE Patented Clip-N-Fit feature allows the installer to change the wattage of the heater to a lower output without moving jumper wire. Each heater is factory wired for its maximum wattage. To change wattage, clip out either jumper 1 or 2 as shown in the installation manual for desired wattage. This Patented Clip-N-Fit feature also prevents the operator to change wattage after installation to a higher wattage. Product Phase Volts Watts CFM QMKGFR1500T2 1 120 1500/750 45 QMark LFK Series - Wall Heater QMark s high-capacity, heavy-duty fan-forced wall heaters are designed for use almost anywhere in residential, commercial or industrial areas requiring electric fan forced heaters in 2000 to 4800 watt capacities. They perform exceptionally well in such applications as motels, entryways, playrooms, basements, workshops, garages, stores and similar large areas High Capacity - Up to 4800 watts Three piece design Northern white louvered cover Two pole thermostat Built-in thermal cutout, fan delay Product Volts Watts Amps QMKLFK151 120 1500 12.5 QMKLFK204 120 2000 8.3 QMKLFK304 240 3000 12.5 QMKLFK484 240/208 4800/3600 20.9/17.3 10
Markel 4300 Series Low Profile Fan Forced Wall Heater - With Wall Box Powder coated 20 gauge steel front. Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade - 2200 RPM / 70 CFM Rough in dimensions: 14-1/2 Wide, 7-1/8 High, 3-1/2 Deep Grill dimensions: 16-3/4 Wide, 7-5/8 High Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. SINGLE POLE INBUILT THERMOSTAT (RANGE 50 F - 90 F) Product Color Volts Watts Max BTU s Amps MRKE4315TRP Ivory 120 1500 5120 12.5 MRKE4315TRPW White 120 1500 5120 12.5 MRKHF4310TRPW White 240/208 1000 / 750 3413 / 2560 4.2/3.6 MRKHF4315TRP Ivory 240/208 1500 / 1125 5120 / 3840 6.3/5.4 MRKHF4315TRPW White 240/208 1500 / 1125 5120 / 3840 6.3/5.4 mrkhf4320trpw White 240/208 2000 / 1500 6826 / 5120 8.3 / 7.2 Markel 3310 Series Fan Forced Wall Heater - With Summer Fan Switch Powder coated 18 gauge steel front. Automatic reset thermal limit. Steel block fin element. Vane axial fan blade: 600 RPM / 175 CFM. Grill dimensions: 15-3/8 Wide x 20-9/64 High. Rough in dimensions: 14-3/16 Wide x 19-15/16 High x 4 Deep. Units with dual wattage, factory wired to highest wattage. Wattage selectable at time of installation on some models. MODELS WITH IN-BUILT SINGLE POLE THERMOSTAT (50º - 90ºF TEMPERATURE RANGE) Product Color Volts Watts Max BTU s Amps MRKHF3315TSRP Ivory 240 / 208 3000 / 2250 1500 / 1125 10240 5120 12.5/10.8 6.2/5.4 MRKH3317TSRP Ivory 240 4800 16380 20 MODELS WITH IN-BUILT SINGLE POLE THERMOSTAT (50º - 90º F TEMPERATURE RANGE) Product Color Volts Watts Max BTU s Amps MRKHF3315TRPW White 240 / 208 3000 / 2250 1500 / 1125 MRKHF3316TRP Ivory 240 / 208 4000 / 3000 2000 / 1500 MRKHF3316TRPW White 240 / 208 4000 / 3000 2000 / 1500 10240 5120 13648 6826 13648 6826 12.5/10.8 6.2/5.4 16.8 / 14.4 8.3 / 7.2 16.8 / 14.4 8.3 / 7.2 Lines may not be available at all locations 11
Visit One of Our Locations Corporate 2010 2nd Avenue P.O. Box 5397 Huntington, WV 25703 Phone: 304.523.7491 Fax: 304.525.8917 Toll Free: 1.800.624.3417 Illinois 1911 W. Rendleman Street Marion, IL 62959 Phone 618.993.5197 Fax 618.993.5629 Toll Free: 1.877.501.0767 Kentucky 2528 Greenup Avenue Ashland, KY 41101 Phone: 606.324.8011 Fax: 606.324.5869 Toll Free: 1.800.258.7415 1518 Industrial Park Drive Maysville, KY 41056 Phone: 606.759.9207 Fax: 606.759.4822 Toll Free: 1.800.394.1760 1420 East Cumberland Avenue Middlesboro, KY 40965 Phone: 606.248.1730 Fax: 606.248.7347 Toll Free: 1.800.625.5505 122 Johnson Street* Pikeville, KY 41501 Phone: 606.432.3163 Fax: 606.432.4323 Toll Free: 1.800.443.9044 1121 Central Avenue South Williamson, KY 41503 Phone: 606.237.7150 Fax: 606.237.7153 Toll Free: 1.888.211.7823 North Carolina 485 Watson Road Arden, NC 28704 Phone: 828.681.9813 Fax: 828.684.8034 Toll Free: 1.855.231.3283 8065 Chapel Hill Road Cary, NC 27513 Phone: 919.467.4802 Fax: 919.467.5428 Toll Free: 1.800.280.3467 1100 Concord Parkway North Concord, NC 28027 Phone: 704.788.3300 Fax: 704.788.2966 Toll Free: 1.800.397.0663 1111 Person Street Durham, NC 27703 Phone: 919.596.1396 Fax: 919.596.5520 Toll Free: 1.800.280.0253 4101 Raeford Road Unit 200 Fayetteville, NC 28304 Phone: 910.307.1525 Fax: 910.307.1506 801 South George Street Goldsboro, NC 27530 Phone: 919.735.1701 Fax: 919.734.2461 Toll Free: 1.800.661.3210 2709 Patterson Street Greensboro, NC 27407 Phone: 336.855.8200 Fax: 336.855.6681 Toll Free: 1.800.852.6681 1953 Martin Luther King Jr. Blvd. Kinston, NC 28501 Phone: 252.523.7685 Fax: 252.523.7986 Toll Free: 1.800.280.6260 989 West Pine Street (Hwy. 89) Mt. Airy, NC 27030 Phone: 336.786.9816 Fax: 336.786.2228 Toll Free: 1.800.522.9816 3925 Tarheel Drive Raleigh, NC 27609 Phone: 919.821.5320 Fax: 919.833.5776 Toll Free: 1.866.743.7473 815 Julian R. Alsbrook Hwy Roanoke Rapids, NC 27870 Phone: 252.535.3171 Fax: 252.535.3141 Toll Free: 1.800.280.3999 1415 South Main Street Salisbury, NC 28144 Phone: 704.633.9131 Fax: 704.633.9158 Toll Free: 1.800.397.0848 130 Houston Road Troutman, NC 28166 Phone: 704.528.8081 Fax: 704.528.8370 Toll Free: 1.800.799.4252 1221 National Drive P.O. Box 5098 Winston-Salem, NC 27103 Phone: 336.723.9656 Fax: 336.777.0588 Toll Free: 1.800.223.9656 Ohio 9 Herrold Avenue Athens, OH 45701 Phone: 740.594.1177 Fax: 740.594.1166 Toll Free: 1.877.801.0559 1262 Industrial Drive Chillicothe, OH 45601 Phone: 740.774.1107 Fax: 740.773.5121 Toll Free: 1.800.443.8084 555 Mill Park Drive Lancaster, OH 43130 Phone: 740.654.0830 Fax: 740.654.4309 Toll Free: 1.800.645.0830 201 Stonecreek Road NW New Philadelphia, OH 44663 Phone: 330.308.0659 Fax: 330.308.0667 Toll Free: 1.855.298.0492 2045 8th Street Portsmouth, OH 45662 Phone: 740.354.3141 Fax: 740.354.3143 Toll Free: 1.800.282.4593 Virginia 390 Arbor Drive* Christiansburg, VA 24073 Phone: 540.382.6415 Fax: 540.381.1520 Toll Free: 1.800.874.7856 348 North Monroe Avenue Covington, VA 24426 Phone: 540.965.5200 Fax: 540.962.8852 1011 Commerce Road Richmond, VA 23224 Phone: 804.232.8911 Fax: 804.232.0794 Toll Free: 1.800.922.4296 3105 Shenandoah Avenue, NW Roanoke, VA 24017 Phone: 540.343.3800 Fax: 540.981.2899 Toll Free: 1.877.595.8386 225 North 11th Street Wytheville, VA 24382 Phone: 276.228.3191 Fax: 276.228.7467 West Virginia 530 Ragland Road* Beckley, WV 25801 Phone: 304.256.2200 Fax: 304.256.2229 Toll Free: 1.800.642.2762 820 Bluefield Avenue Bluefield, WV 24701 Phone: 304.327.3464 Fax: 304.325.6610 Toll Free: 1.800.544.6755 890 East Pike Street Clarksburg, WV 26301 Phone: 304.624.7467 Fax: 304.624.7464 Toll Free: 1.800.642.7467 1223 Charles Avenue Dunbar, WV 25064 Phone: 304.766.0500 Fax: 304.766.0518 Toll Free: 1.800.642.8642 405 12th Street Dunbar, WV 25064 Phone: 304.768.3600 Fax: 304.768.3698 Toll Free: 1.800.344.5202 2010 2nd Avenue* P.O. Box 5397 Huntington, WV 25703 Phone: 304.523.7491 Fax: 304.522.9624 Toll Free: 1.800.624.3417 181 Oak Carriage Lane Lewisburg, WV 24901 Phone: 304.647.5200 Fax: 304.647.4812 Toll Free: 1.800.624.6080 Rt. 10 South, McConnell Addition P.O. Box 1286 Logan, WV 25601 Phone: 304.752.3161 Fax: 304.752.5945 Toll Free: 1.800.397.0706 3069 University Avenue Morgantown, WV 26505 Phone: 304.598.1131 Fax: 304.598.8740 Toll Free: 1.800.258.2454 4601 Camden Avenue* P.O. Box 1605 Parkersburg, WV 26102 Phone: 304.424.8100 Fax: 304.424.8144 Toll Free: 1.800.642.2630 108 Walnut Street Princeton, WV 24740 Phone: 304.425.1718 Fax: 304.425.1752 *Showroom Locations