ULTRA-SAFE EXP. Applications E X P L O S I O N - P R O O F H E A T E R S
|
|
- Emil Hart
- 5 years ago
- Views:
Transcription
1 ULTRA-SAFE EXP U N I T E X P L O S I O N - P R O O F S Applications Aircraft Hangars/Service Areas hemical Storage/Handling Areas oal Preparation Plants ompressor Stations Grain Elevators Oil Refineries and Rigs Paint Storage Areas Petrochemical Plants Sewage Pump Stations/ Treatment Plants Spray Booths lass I, Divisions and, Groups and D lass II, Divisions and, Groups E, F and G lass I, Zones and, Group IIB Temperature ode T, 0 F (60 ) INDEEO s ULTRA-SAFE EXP explosion-proof unit heater is designed with both safety and versatility in mind. Unique ULTRA-SAFE EXP features include: Industry s Lowest Ignition Temperature ode Rating: T, 0 F (60 ) Dual Overtemperature Protection: With both automatic and manual reset overtemperature cutouts for additional safety. Nontoxic Propylene Glycol Heat Transfer Fluid Low 70 PSIG Relief Valve Setting: This assures that in an emergency, the initial escaping vapor temperature remains below the 0 F (60 ) ignition temperature. orrosive Resistant Options: INDEEO offers three constructions suitable for most applications. Standard construction for use in dry non-corrosive areas includes: welded steel heat exchanger; powder-coated cabinet; epoxy-coated motor. A 6 stainless steel construction suitable for Waste Water Treatment Plants includes: 6 stainless steel heat exchanger, headers and tubes with aluminum fins; stainless steel cabinet; corrosive resistance hardware; epoxy-coated motor. Third construction is suitable for use in hemical Plants where chlorides are present and includes: Heresite coated heat exchanger, cabinet, fan blade; corrosive resistance hardware; epoxy-coated motor. Standard onstruction Features Heat Exchanger Efficient liquid-to-air design utilizes an all welded steel headers and finned tube construction with spiral wound aluminum fins. Industrial grade INDEEO heating elements are immersed in a nontoxic, inhibited, propylene glycol heat transfer fluid that provides freeze protection down to -49 F (-45 ). The heat exchanger is hydrostatically tested at 50 psig. A pressure relief valve provides excess pressure protection and is set at 70 psig. Fan Motor Assembly onsists of an explosion-proof motor fitted with an aluminum fan blade. The motor has double-shielded, permanently lubricated ball bearings and automatic reset line breaking thermal overload protection. Motors furnished on standard units operate at line voltage and are prewired to the control enclosure so separate field wiring to the motor is not required. The standard motor is rated for lass I, Groups and D, lass II, Groups F and G. The minimum operating temperature is -4 F (-5 ) and the minimum storage temperature is -49 F (-45 ). Optional motor ratings are described on page 9. abinet/louvers Industrial grade, corrosion resistant construction fabricated from powder coated 4-gauge galvanized steel. The adjustable louvers have minimum opening safety stops. ontrols Factory mounted on the unit heater. Standard built-in controls include automatic and manual reset overtemperature cutouts, controlling magnetic contactor, 4-volt control circuit transformer and incoming power terminal blocks housed in a NEMA 7, 9 cast aluminum enclosure
2 U N I T ULTRA-SAFE EXP Factory Built-in Options ode Option Description D E H 6 Stainless Steel orrosion Resistant onstruction (Waste Water Treatment Plants) Dirty Duty orrosion- Resistant onstruction (hemical Plants) Disconnect Switch Group E (Metal Dust ) onstruction 50 Hertz Motor 6 Stainless steel heat exchanger with aluminum fins, 6 stainless steel cabinet; aluminum fan blade; cast aluminum NEMA 4X, 7, 9 control enclosure; corrosionresistant hardware; corrosion-resistant protective coated motor which has passed the TM B7 salt-spray test. Epoxy-coated motor; Heresite coated heat exchanger cabinet and fan blade; cast aluminum NEMA 4X, 7, 9 control enclosure; corrosion resistant hardware; corrosionresistant protective coated motor which has passed the TM B7 salt-spray test. Factory installed on the unit heater beside the control enclosure. This is an inexpensive and positive way to meet NE/E requirements for a disconnecting means within sight of the heater. lass II, Group E (Metal Dust) onstruction Temperature ode T, 0 F (60 ) Optional motors for international requirements. ontact factory for KW availability. ode () S E X P L O S I O N - P R O O F S K "Warning" Pilot Light Indicates when the thermal cutouts have tripped and the unit heater needs servicing. L "Heater On" Pilot Light Indicates when the electric heating elements are energized. M Manual Reset Thermal utout with Backup ontactor A pilot duty manual reset thermal cutout with a backup contactor is provided for independent secondary overtemperature protection. This option cannot be provided if option ode S or V are also specified. S Auto/Fan Selector Switch A two-position switch wired to the control circuit for auto (automatic heat) and fan only control. This selector switch cannot be provided if option ode M or V are also specified. T Adjustable Thermostat Factory installed and prewired to the control enclosure. Thermostat is adjustable from 50 to 90 F (0 to ) range. S V 0 Volt ontrol ircuit an be provided when required for special external thermostat circuit. This option cannot be provided if option ode S or M are also specified. Nor can both K and L be specified. () S = Stock, = Assembly Stock, = ustom Stock heaters ordered with assembly stock or custom options subject to longer delivery
3 ULTRA-SAFE EXP U N I T E X P L O S I O N - P R O O F S Accessory Items ULTRA-SAFE EXP Heater Mounting Kits These are available for ceiling, wall and pole mounting configurations as described below. Specify type required and catalog number at time of order entry..5 (6.5) MH ULTRA-SAFE EXP Explosion-proof Unit Heater 6-/8" (59.76 mm) 5" (7 mm) ULTRA-SAFE EXP Explosion-proof Unit Heater MW 5" (7 mm) ULTRA-SAFE EXP Explosion-proof Unit Heater eiling Mounting Kit Wall Mounting Kit Pole Mounting Kit MW Size MH In. (mm).06 (8) 5.06 (8.6) 9.06 (484.) MW In. (mm) 9 (8.6) 7 (77.8) 5 (7) Unit Heater Mounting Kits (One kit required per heater) Mounting Kits for use with Standard Heater Powder oated onstruction atalog Number Description eiling Mounting Kit, for Frame Sizes,, Wall Mounting Kit, for Frame Size,, Pole Mounting Kit, for Frame Size,, Week Unit Heater Mounting Kits (One kit required per heater) Mounting Kits for use with Heaters which include optional orrosion Resistant odes and atalog Number 045-S 0454-S 0455-S Description orrosion Resistant eiling Mounting Kit, for Frame Sizes,, orrosion Resistant Wall Mounting Kit, for Frame Size,, orrosion Resistant Pole Mounting Kit, for Frame Size,, Week For corrosion resistant option, add - S to the end of item number. Remote Room Thermostat Use catalog number See page
4 U N I T ULTRA-SAFE EXP Dimensions, Airflows and Weights Overall Heater Dimensions Airflow haracteristics Motor/Fan Weight KW Range X In. (mm) Y In. (mm) Z In. (mm) FM (M/Hr) Throw Ft. (m) RPM HP Fan Diameter In. (mm) Net Lbs (Kg) Shipping Lbs (Kg) Size Size Size -5 KW KW 5 KW 0 KW 5 KW 0 KW 8.5 (46.55) 9.75 (49.5) 6.06 (408) (4.5) 5 (7.6) /4 (04.8) 0 (49.89) 0 (58.96) 8.5 (46.55).75 (59.75) 0.88 (5.775) (.7) 75 /4 6 (406.4) 50 (68.0) 69 (76.65) 0.00 (508) 7.75 (695.5) 4.88 (64.75) (9.8) 75 (.8) / 0 (508) 90 (86.8) 6 (97.97) E X P L O S I O N - P R O O F S Y X Side View 6-/4" Z Front View
5 ULTRA-SAFE EXP U N I T E X P L O S I O N - P R O O F S ULTRA-SAFE EXP Unit Heater Listing KW Volts Phase Total Amps () Frame Size Approximate Air Temperature Rise F ( ) 5 (8) 5 (8) 5 (8) 5 (8) 5 (8) 5 (8) 5 () 5 () 5 () 5 () 5 () 5 () 8 (6) 8 (6) 8 (6) 8 (6) 8 (6) 8 (6) 8 () 8 () 8 () 8 () 8 () 7 (5) 7 (5) 7 (5) 7 (5) 5 (9) 5 (9) 6 (4) 6 (4) 5 () 5 () lass I, Divisions and, Groups and D lass II, Divisions and, Groups F and G lass I, Zones and, Group IIB Temperature ode T, 0 F (60 ) atalog Number -FA-006 -FA-006J -FA-006D -FA-006K -FA-006U -FA-006Z -FA FA-0056J -FA-0056D -FA-0056K -FA-0056U -FA-0056Z -FA FA-0086J -FA-0086D -FA-0086K -FA-0086U -FA-0086Z -FA-006J -FA-006D -FA-006K -FA-006U -FA-006Z -FB-056D -FB-056K -FB-056U -FB-056Z -FB-006U -FB-006Z -F-056U -F-056Z -F-006U -F-006Z Week () Total Amps = Heating element amps and motor amps
6 U N I T Standard - Non-corrosive applications Aircraft Hangars/Servicing Areas oal Mines/Preparation Plants Gasoline Fueling/Storage Areas Paint Spraying/Storage Areas Utility Plants ULTRA-SAFE EXP Explosion-Proof Unit Heater Three onstructions to hoose From; Standard, Stainless Steel or Heresite Standard 4VA transformer ontactor Automatic and manual reset overtemperature thermal cutouts Heavy 4-Gauge abinet Powder coated - standard 6 stainless steel or Heresite coated - options Optional 6 Stainless Steel or Heresite oating hemical Plants hemical Storage/Handling Areas Food Processing Plants Oil Refineries Petrochemical Plants Sewage Treatment/Wastewater Treatment Plants Adjustable louvers Finger safe fan guard split construction for easy removal for field servicing. E X P L O S I O N - P R O O F S Optional Disconnect switch with lockout Fan selector switch Thermostat Thermally-protected explosion-proof motor with heavy-gauge aluminum fan blade designed for easy field servicing. Designed for Easy Servicing Removable core Split fan guard Easy access to motor and fan Replaceable automatic and manual thermal cutouts Threaded control enclosure Heater ore All welded construction with: Painted steel heaters with steel tubes and spiral wound aluminum fins - standard 6 stainless or heresite construction - options ore can be easily removed through bottom of cabinet Heresite is a registered trademark of Heresite Protective oatings, Inc
Ultra-Safe EXP Unit Heater
INDEEO s ULTRA-SAFE EXP explosion-proof unit heater is designed with both safety and versatility in mind. Unique ULTRA-SAFE EXP features include: Industry s Lowest Ignition Temperature ode Rating: T3,
More informationULTRA-SAFE Explosion-proof Duct Heaters
Standard Construction Heat Exchanger has copper tubes with integral aluminum fins. Each unit undergoes hydrostatic testing at 350 psig, five times the pressure relief valve setting of 70 psig. Heat Transfer
More informationFX5 Series Explosion-Proof Electric Air Heaters
FX5 Series Explosion-Proof Electric Air Heaters Ruffneck FX5 heaters are C UL US certified for use in hazardous locations. They are designed for the harshest environments such as: dry indoor industrial
More informationULTRA-SAFE Explosion-proof Duct Heaters
Standard Construction Heat Exchanger has copper tubes with integral aluminum fins. Each unit undergoes hydrostatic testing at 350 psig, five times the pressure relief valve setting of 70 psig. Heat Transfer
More informationFE1 Explosion-Proof Electric Air Heaters
Explosion-Proof Electric Air Heaters The heater core assembly is contained in a sturdy, epoxy-coated, 14-gauge steel cabinet which also carries the motor and fan assembly. Adjustable louvers allow directional
More informationComfort. Description. Applications
Blower Heater 3-35 kw 10,00-119,40 Btuh 40 to 90 Volts, 50/0 Hz 31 Stainless Steel Case Shown 3 Phase ATEX, GOST, CE IIG Exd IIB T3 Description Type is designed to heat areas classified as hazardous locations
More informationStars Management JLT SUBMITTAL. EXPLOSION PROOF ELECTRIC AIR HEATER (FX Series)
Stars Management JLT SUBMITTAL EXPLOSION PROOF ELECTRIC AIR HEATER (FX Series) Tel: 00971 (04) 457 2383 Fax: 00971 (04) 457 2382 P.O. Box: 25867 Dubai U.A.E. E-mail: info@starsmanagementjlt.com Website:
More informationExplosion-Proof and Fan-Forced Unit Heaters. Our products do more in a wide range of applications. Expect More.
Explosion-Proof and Fan-Forced Unit Heaters Our products do more in a wide range of applications. Expect More. Introduction/Table of Contents Indeeco offers commercial and industrial electric heating and
More informationBrasch Hazardous Location Unit Heaters
Brasch Hazardous Location Unit Heaters BHUH Features Designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to the presence of certain
More informationAEU1. Explosion-Proof Electric Air Heater For Hazardous Locations
AEU1 Explosion-Proof Electric Air Heater For Hazardous Locations 0518 II 2G, Ex d IIB T4 Gb IP55 (ATEX) Ex d IIB T4 Gb IP55 (IECEx) 1ExdIIBT4 X IP55 (EAC Ex) (Suitable for ATEX/IECEx/EAC Ex Zone 1 & 2)
More informationExplosion-Proof Forced Air Unit Heater - XGB
Explosion-Proof Forced Air Unit Heater - XGB The XGB Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions.
More informationXGB Unit Heater. Certification. Model Coding XGB 038 T3B 3 1 T TEMPERATURE CODE T3B (165 C) T3A (180 C) T2D (215 C) T2C (230 C)
The Norseman Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions. Norseman unit heaters are available
More informationExplosion-Proof Forced Air Unit Heater - XGB
Explosion-Proof Forced Air Unit Heater - XGB The XGB Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions.
More informationDescription. Applications
CXH-EP PDS CXHEP Convection Explosion Proof Heater Electric Blower For Hazardous Locations Unit for Hazardous 3 to 35kW 10,200 to 119,420 BYU/Hour NORTH AMERICAN RATINGS 208 to 600 Volts 1.8 to 9.0kW (T-2A)
More informationCR1 Series Triton Corrosion Resistant Washdown Heaters
CR1 Series Triton Corrosion Resistant Washdown Heaters Ruffneck CR1 Triton Series is a new generation of NEMA 4X corrosion-resistant washdown heaters. The first UL listed Type 4X heater with models ranging
More informationDescription. Applications
CVEP PDS CVEP Convection for Hazardous Heater For Locations Hazardous Locations Convection Heater 1.8 to 9.0kW (T-2A) 280 C (536 F) 1.6 to 4.0kW (T-3A) 180 C (356 F) 1.8 to 9.0kW (T-2) 1.8 300 C to 9.0kW
More informationTABLE OF CONTENTS. FCV Nomenclature 3. FCV Features & Construction 4. FCV Engineering Specifications 5. FCV Fan/Coil Data 6
TABLE OF CONTENTS Page FCV Nomenclature 3 FCV Features & Construction 4 FCV Engineering Specifications 5 FCV Fan/Coil Data 6 FCV Unit Weights and Volumes 7 FCV Fan and Motor Data 8-9 Dimensions 10-14 Standard
More informationXEU1. Explosion-Proof Electric Air Heater For Hazardous Locations
235730 XEU1 3k mode W ls ther m & new now a ostats vailab le! Explosion-Proof Electric Air Heater For Hazardous Locations Class I, Division 1 & 2, Groups C & D Class II, Division 1 & 2, Groups F & G Temperature
More informationHLA Series Hazardous Location Fan Forced Unit Heater
Products Company Markel Products Company Markel Products Company Markel Products Co HLA Series Hazardous Location Fan Forced Unit Heater FAN-FORCED SUSPENDED UNIT HEATERS 3-25 KW FOR CLASS I, GROUP C &
More informationDescription. Construction
LUH LUH PDS Horizontal Unit Heater 2.6 to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)
More informationHLA Series Hazardous Location Fan Forced Unit Heater
HLA Series Hazardous Location Fan Forced Unit Heater FAN-FORCED SUSPENDED UNIT HEATERS 3-25 KW FOR CLASS I, GROUP C & D, DIVISION 1 & 2 AND CLASS II, GROUPS E, F & G, DIVISIONS 1 & 2. Shown with optional
More informationKUH. Horizontal Unit Heater. Applications. Description
KUH KUH PDS Horizontal Unit Heater 2.6 kw to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)
More informationToll-Free: TPI CORPORATION Hazardous Location Fan Forced Unit Heater
Toll-Free: 1-800-462-4983 Hazardous Location Fan Forced Unit Heater 3-25KW for Class I, Group C & D, Division 1 & 2 and Class II, Groups E, F & G, Divisions 1 & 2. Designed for rugged industrial applications
More informationHLA Series Hazardous Location Fan Forced Unit Heater Data Sheet
General Characteristics of Hazardous Location ofan Forced Heater HLA Series The HLA Series is designed for rugged industrial applications in hazardous locations where the possibility of explosions or fire
More informationThermal Devices, Inc. Mount Airy, Maryland USA
Unit Heater 2.6-50 kw 8,900 170,600 Btuh 208, 240, 277, 480, and 600 volt 1 or 3 phase Wall or Ceiling Mounted Canadian Standards Standards Description The Chromalox self-contained blower heater provides
More informationIndustrial Air Heaters
HVH Horizontal or Vertical Discharge Fan Forced Unit Heater Industrial Air Heaters 2.6-50 kw 8,900 170,600 Btuh 208, 240, 277, 480, and 600 volt 1 or 3 phase Vertical or Horizontal Airflow Wall or Ceiling
More informationTECHNICAL GUIDE DESCRIPTION SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 FEATURES B-0703
TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS MODELS: HF-07 DESCRIPTION These Sunline 2000 units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging.
More informationHUH2. Hydronic Unit Heater CRN: 0H C 400 psig (2758 KPa) Industrial Grade Heat-Exchanger Unit Heaters
Available with reversible core connection feature! HUH2 36 inch fan size model now available! Hydronic Unit Heater CRN: 0H14933.2C 400 psig (2758 KPa) Industrial Grade Heat-Exchanger Unit Heaters www.hazlocheaters.com
More informationEXH Series Explosionproof Electric Air Heaters
EXH Series Electric Air Heaters Cl. I, Div. & 2, Groups C, D Cl. II, Div., Groups E, F, G NEMA 7CD, 9EFG EXH explosionproof electric heaters are used: In areas made hazardous by the presence of flammable
More informationPipe Thread Heaters. Construction Features. 1" 2-1/2" Pipe Thread Heaters
Construction Features 1" 2-1/2" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging of hex, thread and riser assures reliability. Element
More informationMAC N-407 Air-Cooled Chiller
MAC036-01-N-407 Air-Cooled Chiller Air-Cooled Chillers for Global Residential and Light Commercial MicroClimates MAC036 NOMENCLATURE BREAKDOWN MAC036-01 - N - 407 Refrigerant Type Air-Cooled Chiller 036=
More informationExplosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts.
EXUB Explosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts. Forced-Air Heater for Hazardous Locations Class I, Divisions 1 & 2, Groups
More informationType UB-2502A and UB-3002A Forced-Air Heater
Installation, Operation and RENEWAL PARTS IDENTIFICATION 4 (Supersedes PF423-3) JULY, 2002 Type UB-2502A and UB-3002A Forced-Air Heater UB PF423-4 161-027048-001 Figure 1 (Wall Mounted) Figure 2 (Ceiling
More informationLUH HORIZONTAL FAN-FORCED UNIT HEATER
LUH HORIZONTAL FAN-FORCED UNIT HEATER VERSATILE, FAN-FORCED HEATING FOR COMMERCIAL AND INDUSTRIAL COMFORT HEAT APPLICATIONS Horizontal airflow Wall or ceiling mounting Self-contained Totally enclosed fan
More informationCustom Duct Heaters. Special Applications
Special Applications Air Conditioning & Air Handling Units For more than 55 years, INDEECO has been supplying special heaters for use in air handling and air conditioning equipment (Figure 49). A wide
More informationElectric Unit Heaters for Standard and Hazardous (Classified) Locations
2-116. January, 07 Electric Unit eaters for Standard and azardous (Classified) Locations MODEL ER MODEL VE MODEL PTE MODEL EX table of contents Table of Contents Page Electric Unit eaters - Models ER,
More informationOwner s Manual. FX4 Series. Electric Forced Air Heaters for Hazardous Locations
Owner s Manual FX4 Series ISO 9001 Electric Forced Air Heaters for Hazardous Locations This manual covers the installation, maintenance, repair and replacement parts. approved Locations The Electric Forced
More informationElectric Unit Heaters
Electric Unit Heaters Model UHEC Horizontal Discharge Model UHEC Vertical Discharge Model UHRA Hose-Down Model UHXA Explosion-Proof December 2001 Features and Benefits Model UHEC Electric Unit Heaters
More informationB. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).
Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage
More informationSECTION AIR COILS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 82 16 AIR COILS SPEC WRITER NOTE: Delete between //---// if not applicable to project. Also delete any other item or paragraph not applicable in the section
More informationCX1 ProVector Explosion-Proof Heaters
Explosion-Proof Heaters For hazardous locations heating, rely on the for the most dependable, troublefree service available. CCI Thermal Technologies Inc. manufactures explosion-proof air heaters to satisfy
More informationMACH N-407 Heat Pump Air-Cooled Chiller
MACH060-01-N-407 Heat Pump Air-Cooled Chiller Heat Pump Air-Cooled Chillers for Global Residential and Light Commercial Microclimates MACH NOMENCLATURE BREAKDOWN MACH-060-01 - N - 407 Refrigerant Type
More informationUHIR Series. Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater. Owner s Manual
UHIR Series Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater Owner s Manual This manual covers installation, maintenance and repair parts. Read carefully before attempting to
More informationPipe Thread Heaters. Construction Features. Star Electric to Order Call " 2-1/2" Pipe Thread Heaters
Pipe Thread Heaters Construction Features " -/" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging hex, thread and riser assures reliability.
More informationCHS. Product Specifications COMMERCIAL SPLIT SYSTEMS HEAT PUMP UNITS R 410A, 6 10 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
COMMERCIAL SPLIT SYSTEMS HT PUMP UNITS R 410A, 6 10 TONS BUILT TO LAST, SY TO INSTALL AND SERVICE Single stage cooling capacity control on all models All models utilize round copper tube, aluminum plate
More informationCXH-A Forced-Air Heater
Installation and Operation Instructions CXH-A Forced-Air Heater CXH-A-0 EP to CXH-A-5 EP Class I - Groups C & D, Div. & 2 Class II - Groups E, F & G TB - 65 C (29 F) PF490-6-0242-004 July 20 Table A -
More informationFX5 SD Series Electric Forced Air Heaters for Hazardous Locations
Owner s Manual FX5 SD Series Electric Forced Air Heaters for Hazardous Locations ISO 9001 This manual covers the installation, maintenance, repair and replacement parts. APPROVED LOCATIONS The Electric
More informationTubular Industrial Process
consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Standard Screw Plug
More information1.1 This section applies to air handling units for HVAC Systems.
AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling
More informationSECTION ROTARY-SCREW WATER CHILLERS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Factory-assembled packaged chiller. B. Charge of refrigerant and oil. C. Controls and control connections. D. Chilled water connections. E. Electrical power connections.
More informationCAS. Product Specifications. COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 12.5 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE
COMMERCIAL SPLIT SYSTEMS CONDENSING UNITS R 410A, 6 to 12.5 TONS BUILT TO LAST, EASY TO INSTALL AND SERVICE CAS Product Specifications Single stage cooling capacity control on all models with Micro channel
More informationMAC-120HE-03 Air-Cooled Chiller
MAC-120HE-03 Air-Cooled Chiller 10 Ton / 120,000 BTUH Air-Cooled Chiller 380/415/460-3-50/60 1 HVAC Guide Specifications Air-Cooled Liquid Chiller Nominal Size: 10 Tons Multiaqua Model Number: MAC-120HE-03
More information100 TON AIR-COOLED SCROLL PACKAGED. Call us today! (800) SPECIFICATIONS GENERAL DIMENSIONS ELECTRICAL DATA ADDITIONAL INFORMATION
100 TON AIR-COOLED SCROLL PACKAGED SPECIFICATIONS Call us today! (800)341-4297 Trane Portable Packaged Air Conditioner units contain the best compressor technology available, in order to achieve the highest
More information60 TON AIR-COOLED CHILLER. Call us today! (800) PA-ACCTR-60 GENERAL DIMENSIONS ELECTRICAL DATA 60 TON AIR-COOLED CHILLER FEATURES
60 TON AIR-COOLED CHILLER PA-ACCTR-60 Call us today! (800)341-4297 The 60-Ton portable chiller package features a Trane CGAM chiller unit. Trane leads the industry in providing some of the most reliable,
More informationCF1 ProVector Explosion-Proof Heaters
CF1 ProVector Explosion-Proof Heaters The CF1 Series ProVector Explosion-proof convection heater offers the most reliable, dependable and trouble-free service available for heating hazardous locations
More informationProduct Specifications. Vertical Floor Consoles By First Co.
NOW WITH 18 GAUGE CABINET AND FACTORY INSTALLED SERVICE SWITCH Product Specifications VFB Series VSB Series VCB Series Vertical Console Fan Coils 300-00 CFM Vertical Floor Consoles By First Co. VFB Series
More informationPortable Vertical Air-Conditioning and Heating Systems
Portable Vertical Air-Conditioning and Heating Systems Specifications for 10 Ton Units 208 230 volt 7 1 77 77 77 33 Front Side Back 77 71 / 77 Front 33 Side 2 Cabinet Features: Heating and Cooling Data:
More information240 Series Unit Heater SameDay Shipping
SameDay Shipping Now Available on Select s The unit heater is available in four unit sizes with 9 standard models with ratings up to 0 KW at voltages of 20, 240, 277, 40 and 600 single or three-phase.
More informationAEU1 Electric Forced-Air Explosion-Proof Heater Owner s Manual, Version: AEU1-OM-B This manual covers installation, maintenance, repair, and replacement parts. Forced-Air Heater for Hazardous Locations
More informationProduct Chillers A P P L I C AT I O N S
Product Chillers A P P L I C AT I O N S Wineries Bottling Product Storage Product Ripening Meat Processing Florist Boxes Packaging Rooms Walk-in Coolers Beverage Boxes CENTURY PRODUCT CHILLERS Unit Configuration
More informationINSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 350 SERIES CIRCULATION HEATERS
INDEECO Circulation Heaters are designed to provide years of trouble free operation if properly installed and maintained. Please read and follow these instructions for installing and maintaining the heater.
More informationCall us today! (800)
150 TON AIR-COOLED CHILLER PA-ACCTR-150 Call us today! (800)341-4297 The 150-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable,
More informationTECHNICAL GUIDE MODELS: H5CE090, H3CE120 & H1CE /2, 10, & 12-1/2 NOMINAL TONS EER DESCRIPTION
TECHNICAL GUIDE SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS SUNLINE 2000ô MODELS: H5CE090, H3CE120 & H1CE150 7-1/2, 10, & 12-1/2 NOMINAL TONS 9.0-9.5 EER DESCRIPTION These Sunline 2000ô units are completely
More informationSECTION AIR DOORS
SECTION 23 34 33 AIR DOORS Berner Series VSA air doors are designed for openings up to 12 ft for environmental separation and up to 10 ft for insect control. Berner Series VSB air doors are designed for
More informationCustom Duct Heaters. Special Applications
Special Applications Air Conditioning & Air Handling Units For more than 50 years, INDEECO has been supplying special heaters for use in air handling and air conditioning equipment (Figure 50). A wide
More informationSECTION (15767) - UNIT HEATERS
SECTION 23 82 39 (15767) - UNIT HEATERS PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Unit Heaters. 2. Cabinet Unit Heaters. 3. Duct Heaters. 4. Baseboard Heaters. B. Related Sections: 1. Section
More informationHVAC. Air Blowers Fans Forced Air Heaters Heating Cables & Insulation Infrared & Radiant Heaters
Air Blowers.................................352 Fans................................... 353-354 Forced Air Heaters........................... 354 Heating Cables & Insulation....................355 Infrared
More informationSECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM
SECTION 23 81 06 - PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. This Section includes equipment types that contain all the components of the refrigeration process within
More information30GT FLOTRONIC AIR-COOLED CHILLERS
30GT-41SB 30GT040-110 FLOTRONIC AIR-COOLED CHILLERS PERFORMANCE DATA FIELD WIRING DIAGRAM 1998 Carrier Corporation Syracuse, New York 13221 Form 30GT-41SB Supersedes 30GT-21SB, 30GT-22SB, 30GT-23SB, Printed
More informationExplosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1
Explosion Proof Light - 400 Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Part #: EPL-HB-400W-MH Made in the USA The EPL-HB-400W-MH metal halide, hazardous area light fixture from Larson Electronics
More informationINSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 870 SERIES INDUSTRIAL CONTROL PANELS
INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 870 SERIES INDUSTRIAL CONTROL PANELS GENERAL INDEECO Industrial Control Panels are designed to provide years of trouble free operation if properly
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS Model PSA4BI Series M1200 Product Line R-410A Ultra High Efficiency Air Conditioner 24.5 SEER 2-3-4 Ton 2 M1200 12 YEAR ALL PARTS LIMITED WARRANTY M1200 WITH UPGRADED WARRANTY
More informationC. ASME Compliance: Fabricate and label water chiller heat exchangers to comply with ASME Boiler and Pressure Vessel Code: Section VIII, Division 1.
SECTION 236426 - ROTARY-SCREW WATER CHILLERS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes packaged, water cooled or air cooled as scheduled, electric-motor-driven, rotary-screw water chillers
More informationElectric Unit Heaters for Standard and Hazardous (Classified) Locations
2-6.4 August, 09 Electric Unit eaters for tandard and azardous (Classified) Locations MODEL ER MODEL VE MODEL PTE MODEL EX table of contents Table of Contents Page Electric Unit eater Design Benefits Introduction...3
More informationJOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: REFERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED BY: DATE:
T2HA, T3HA, and T4HA with CAHB Systems Limited Range Multi-Zone Heat Pumps Rev. 1.1 [07/07] JOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: ERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED
More informationPACKAGE AIR CONDITIONER
PACKAGE AIR CONDITIONER FORM NO. ATZ-206 TZAA- HIGH EFFICIENCY SERIES NOMINAL SIZE 10 TON [35.2 kw] 10 TON MODEL [35.2 kw] This product is shipped with a nitrogen holding charge that must be vented prior
More informationMHCCW Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH
MHCCW-10-05 Chilled Water Ceiling Concealed With 5kW Electric Heat 2-Pipe Heat / Cool Fan Coil 30,000 BTUH Rev. 1.21 HVAC Guide Specifications Chilled Water Fan Coil with Electric Heat 2-Pipe Nominal Size:
More informationHD3D Forced-Air Heater
Installation, Operation and Maintenance Instructions HD3D Forced-Air Heater Corrosion Resistant/Hose Down PF200-8 6-30552-00 July 207 Table of Contents Section Page. Warnings... 3 2. Optional Equipment...
More informationCOLD WEATHER SOLUTIONS: ELECTRIC HEAT AND CONTROL PRODUCTS
COLD WEATHER SOLUTIONS: ELECTRIC HEAT AND CONTROL PRODUCTS INDUSTRIAL AIR AND INFRARED RADIANT HEATERS Portable Unit Heaters Portable electric heaters are available in radiant-heat or fan-forcedair designs.
More informationSECTION PACKAGED COMPRESSOR AND CONDENSER UNITS
SECTION 236200 - PACKAGED COMPRESSOR AND CONDENSER UNITS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions apply
More informationTubular Industrial Process
Application Tempco Over-the-Side Immersion Heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round
More informationMHCCW Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH
MHCCW-06-00 Chilled Water Ceiling Concealed Without Electric Heat 2-Pipe Heat / Cool Fan Coil 18,000 BTUH Rev. 1.21 HVAC Guide Specifications Chilled or Hot Water Fan Coil 2-Pipe Nominal Size: 18,000 BTUH
More informationWhy settle for anything less?
PSC PRESSURE SYSTEMS COMPANY INC./aka PSC CLEANING SYSTEMS INC. EXPLOSION-PROOF HOT WATER HIGH PRESSURE CLEANING SYSTEMS For Class I, Group C&D hazardous locations or Class II, Group F&G hazardous locations
More information30GN FLOTRONIC II AIR-COOLED CHILLERS
30GN-19SB 30GN040-110 FLOTRONIC II AIR-COOLED CHILLERS PERFORMANCE DATA FIELD WIRING DIAGRAM 1998 Carrier Corporation Syracuse, New York 13221 Form 30GN-19SB Supersedes 30GN-6SB, 30GN-7SB, 30GN-8SB, Printed
More informationEMI ENGINEERING SUBMITTAL
(MH4) MULTI-ZONE HEAT PUMP AIR CONDITIONING SYSTEM Rev. 1.4 [3/05] JOB NAME: LOCATION: PURCHASER: ENGINEER: SUBMITTED TO: FOR: REFERENCE [ ] APPROVAL [ ] CONSTRUCTION [ ] SUBMITTED BY: DATE: UNIT DESIGNATION:
More informationTECHNICAL GUIDE. Description SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS YD360, 480 & THRU 50 NOMINAL TONS YTG-B-0811
Description These units are completely assembled, piped and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of Refrigerant R-410A for storage
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationFE2 Series. Installation, Operation, & Maintenance Instructions. Electric Forced Air Heaters for Hazardous Locations. Model Coding
WARNING! Read all important information notices. Electric Forced Air Heaters for Hazardous Locations FE2 Series Installation, Operation, & Maintenance Instructions Model Coding FE2 220 1 50 025 W T Model
More information1025, BOUL. MARCEL-LAURIN INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER. Prepared par Claude Gadoury, P. Eng MTL TECHNOLOGIES INC.
WYETH-AYERST CANADA INC. 1025, BOUL. MARCEL-LAURIN S T - L A U R E N T, Q U É B E C INSTRUCTION MANUAL FOR WATER COOLED ENVIROCHILL CHILLER MODEL P448800LT--55WC--22C66S Prepared par Claude Gadoury, P.
More informationSECTION COOLING TOWERS
SECTION 23 65 00 COOLING TOWERS PART 1 - GENERAL 1.1 DESCRIPTION A. Packaged, induced draft open circuit cooling tower complete with fill, fan, inlet louvers and associated accessories and equipment. 1.2
More informationELECTRIC UNIT HEATER REGULAR DUTY
ELECTRIC UNIT HEATER REGULAR DUTY Installation Form RGM 428 (MI500 Revision 0) APPLIES TO: Model EGE INDEX (by page number) Clearance to Combustibles... 3 Dimensions... 4 Electrical... 4 Fan Motor... 4
More informationSTEAM/HOT WATER UNIT HEATERS
STEAM/HOT WATER UNIT HEATERS MODEL HSB/HC MODEL V/VN MODEL PT/PTN MODEL GLW FEBRUARY, 2015 Table of Contents Table of Contents Page I. Design Benefits A. Application, Design, Construction Overview...3
More informationELECTRIC UNIT HEATERS FOR STANDARD AND HAZARDOUS (CLASSIFIED) LOCATIONS
ELECTRIC UNIT EATER FOR TANDARD AND AZARDOU (CLAIFIED) LOCATION MODEL ER MODEL VE MODEL PTE MODEL EX 2-6.6 FEBRUARY, 17 TABLE OF CONTENT Table of Contents Page Electric Unit eater Design Benefits Introduction...3
More informationExplosion-proof Duct Heaters
Safety INDEECO explosion-proof ULTRA-SAFE and EP2 duct heaters are Factory Mutual (FM) and CSA Approved. The ULTRA-SAFE duct heater has the only standard product offering and features the industry s lowest
More informationDirect Gas-Fired Make-Up Air
Direct Gas-Fired Make-Up Air Model TSU Heavy Duty, High Airflow Applications Manufacturing and Industrial Facilities Up to 64,000 cfm August 2012 Products Model TSU Direct Gas-Fired Make-Up Air Unit The
More informationSECTION AIR COOLED WATER CHILLERS
PART 1 GENERAL 1.1 SECTION INCLUDES A. Chiller package B. Charge of refrigerant and oil C. Controls and control connections D. Chilled water connections E. Starters F. Electrical power connections 1.2
More informationCoil-In-Tank Design: Refrigeration System: Cabinet Construction:
Rite-Temp Manufacturing pioneered the development of refrigerated industrial water chillers in 1948. Since the first Rite-Temp units were introduced, quality engineering and manufacturing has been a key
More informationHorizontal and Vertical DIRECT DRIVE BLOWER COIL UNITS. Rating and selection at
Horizontal and Vertical DIRECT DRIVE BER COIL UNITS Rating and selection at www.enviro-tec.com CDH/CDV TABLE OF CONTENTS Construction Features...3 Fan Assembly...4 Optional Construction...5 Electric Heat...6
More informationCall us today! (800)
PA-ACCTR-200 Call us today! (800)341-4297 The 200-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable, efficient and quiet chiller
More informationHHP2 Hydronic High Performance Heater CRN: 0H14856.2C Owner s Manual, Part No. HHP2-OM-D This manual covers installation, maintenance, repair, and replacement parts. Industrial Grade Heat-Exchanger Unit
More information