CEN System - Delegated Decisions Dispatch 41:2016

2016-10-10 Page 1 CEN System - Delegated Decisions Dispatch 41:2016 1 CEN/CLC JWG 9... 1 2 CEN/TC 122... 2 3 CEN/TC 130... 3 4 CEN/TC 142... 5 5 CEN/TC 151... 5 6 CEN/TC 163... 6 7 CEN/TC 180... 22 8 CEN/TC 195... 24 9 CEN/TC 197... 30 10 CEN/TC 203... 30 11 CEN/TC 216... 31 12 CEN/TC 260... 33 13 CEN/TC 335... 33 14 CEN/TC 349... 35 1 CEN/CLC JWG 9 DECISION 2016/01 CEN/CENELEC JWG9 on 2016-06- 06 Subject: CEN/CLC JWG9- Appointment of Chairperson The CEN/CENELEC JWG9 Energy measurement plan for organisations, - considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; - noting the nomination by the Technical Committee Secretariat; - noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides appoint Fabien Imbault as Chairperson of CEN/CENELEC JWG9 for a period of 3 years starting on 2016-06-06 The decision was unanimity

Page 2 DECISION 2016/02 CEN/CENELEC JWG9 on 2016-06- 06 Subject: CEN/CENELEC JWG9 Appointment of Vice-Chairperson The CEN/CENELEC JWG9 Energy measurement plan for organisations - considering the nomination by the CEN/CENELEC JWG9 Chairperson and Secretariat; - confirming that the appointment of a Vice-Chairman would be beneficial CEN/CENELEC JWG9 and the work carried out in this technical committee; decides appoint Franck Gruffaz as Vice-Chairperson of CEN/CENELEC JWG9 for a period of 3 years starting on 2016-06-06 with the specific duty liaise with relevant cenelec work. 2 CEN/TC 122 Decision CEN/TC 122 453/2016 taken on 2016-10-04 Subject: CEN/TC 122 - Adoption of a New Work Item CEN/TC 122 - Ergonomics having considered the proposal for a new work item as documented in CEN/TC 122 N corresponds 3. Document developed in drafting a new project CEN/TC 122/WG 11 - Ergonomics of the Physical Environment 4. Title Ergonomics - Accessible design - Method for creating colour combinations taking account of age-related change of human colour vision 5. Scope This International Standard provides a method for creating conspicuous colour combinations for use in visual signs and displays taking in account viewer age. It is based on the perceived similarity of colours at phopic and mesopic lighting conditions. This International Standard applies the design of visual signs and displays in which multiple colours

Page 3 are used so that the colours are conspicuous people of any age, including older people who do not have deficient colour vision. The method and data in this International Standard are not applicable the design of visual signs and displays for people with colour deficiencies or medical disorders affecting vision. Basically, this International Standard applies the reflective or object mode colours, but may apply selfluminous mode colours if the colour coordinates are appropriately transferred those of the object mode colours. None of the above. Adoption of already published ISO standard environmental? Other: Adoption of already published ISO standard an ISO document Identical ISO project reference: ISO 24505 63752 11. Related mandate(s) No Issue year: 2016 ISO Project ID: 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):78 9 positive vote(s), 1 negative vote(s) and 10 abstention(s). 3 CEN/TC 130 Decision CEN/TC 130 4/2016 taken on 2016-09-30 Subject: CEN/TC 130 - Adoption of a New Work Item CEN/TC 130 - Space heating appliances without integral heat sources having considered the proposal for a new work item as documented in CEN/TC 130 N

Page 4 corresponds 3. Document developed in drafting a new project CEN/TC 130/WG 13 - Determination of parameters for the efficiency of heating and cooling emission products in relation pren 15316-2. Coordination - Group 4. Title Heating and cooling emission products - Input data for determining the temperature variation in relation EN 15316-2 5. Scope Considering that the new FprEN 15316-2:2016 gives the possibility of using input data from the product standards, it is proposed define a new standard which comply with FprEN 15316-2:2016 itself. The new standard will provide a method for determining input data in conformity with FprEN 15316-2:2016 for the heating and cooling emission products covered by the following EN standards developed by TC 130: - EN 442 Radiars and convecrs; - EN 1264 Water based surface embedded heating and cooling systems; - EN 14037 Ceiling mounted radiant panels supplied with water at temperature below 120 C; - EN 215 Thermostatic radiars valves; - EN 16430 Fan assisted radiars, convecrs and trench convecr. The aim is develop methods for determination of temperature variations values as input data for FprEN 15316-2:2015 based on values taken from the above mentioned standards. environmental? Use of energy Bring in environmental expertise the WG No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project:

Page 5 AFNOR DIN DS NBN SFS SNV UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 14 positive vote(s), 7 abstention(s). 4 CEN/TC 142 Decision 12/2016 CEN/TC 142 on 2016-09-29 Subject: CEN/TC 142 Chairmanship Item 7 The CEN/TC CEN/TC 142 Woodworking machines Safety - considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; - noting the nomination by the Technical Committee Secretariat; - noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides appoint Mr Matteo Simonetta, as Chairman of CEN/TC 142 for a period of 6 years starting on 2016-09-29. The decision was unanimity. 5 CEN/TC 151 Decision CEN/TC 151 802/2016 taken on 2016-09-30 Subject: Extension of dow be included in the future pren ISO 13766-1 CEN/TC 151 - Construction equipment and building material machines - Safety having noted the request of CEN/TC 151 WG 15 for an extension of the date of withdrawal (dow) for the future pren ISO 13766-1 and having noted the justification given for this request: EN 13309 (WI00151210) "Construction machinery - Electromagnetic compatibility of machines with internal power supply" will be replaced by EN ISO 13766-1 (WI00151374) "Earth-moving- and Building construction machinery - Electromagnetic compatibility of machines with internal electrical power supply - Part 1: General EMC requirements under typical EMC environmental conditions" and supplemented by EN ISO 13766-2 "Earth-moving machinery - Electromagnetic compatibility - Part

Page 6 2: EMC requirements under the aspect of functional safety". This updated version of EN ISO 13766-1 makes significant changes allowable test procols. There are many manufacturers that will need make significant changes their testing procedures. Additionally, when EN ISO 13766-1 becomes in effect, all machines going on the market will have have their EMC compliance documentation updated for their product going Europe in concordance with the new standard. In many cases test procedures and equipment will need change. This will result in additional EMC tests needing be run on product still in series production that were tested the old standard. This is a huge amount of work and resources make this happen. In some cases, design changes may be required meet the requirements of the new version of EN ISO 13766-1 and -2. The requested extension (36 months) date of withdrawal for EN 13309 would allow manufacturers be able better manage what in some cases will be a significant amount of work become compliant with the new EN ISO 13766 series.; having noted the advice of the CEN/TC 151 - Construction equipment and building material machines - Safety; considering the CEN/CENELEC Internal Regulations - Part 2, clause 11.2.6.1, laying down the procedure be followed in exceptional cases; agrees with the requested extension of dow for the future pren ISO 13766-1: Earth-moving- and Building construction machinery - Electromagnetic compatibility of machines with internal electrical power supply - Part 1: General EMC requirements under typical EMC environmental conditions (ISO/DIS 13766-1:2016), pren ISOS 13766-2: Earth-moving machinery - Electromagnetic compatibility - Part 2: EMC requirements under the aspect of functional safety (ISO/DIS 13766-2:2016) from the date of availability (dav) plus 6 months the date of availability (dav) plus 36 months. The decision was simple majority with 7 positive vote(s), 11 abstention(s). 6 CEN/TC 163 Decision CEN/TC 163 C002/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N

Page 7 corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Kitchen sinks - Functional requirements and test methods 5. Scope This European Standard specifies the functional requirements of and test methods for kitchen sinks for domestic purposes, which ensure that the product, when installed in accordance with the manufacturers instructions, gives satisfacry performance. NOTE 1 For the purposes of this standard, the term domestic purposes includes use in hotels, accommodation for students, hospitals and similar buildings. This document does not specify aesthetic requirements and the overall dimensions of kitchen sinks. It does not apply industrial kitchen sinks. NOTE 2 All drawings are examples only; other forms are permissible. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s).

Page 8 Decision CEN/TC 163 C003/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Wall-hung urinals - Functional requirements and test methods 5. Scope This European Standard specifies constructional and performance requirements gether with test methods for wall-hung urinals made of vitreous china or stainless steel that are used for personal hygiene. This European Standard does not apply slab and stall urinals nor waterless urinals. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal

Page 9 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C004/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds the revision of an EN. EN 14055:2010+A1:2015 3. Document developed in drafting CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title WC and urinal flushing cisterns 5. Scope This European Standard specifies design, performance requirements and the test methods for WC and urinal flushing cisterns with flushing mechanism, inlet valve and overflow. This document covers flushing cisterns designed be connected drinking water installations inside buildings. This standard does not cover aumatic valveless siphon flushing cisterns for flushing urinals. NOTE Flushing cisterns for one-piece

Page 10 environmental? WCs and close-coupled suites are covered by EN 997. Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C005/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N

Page 11 corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Sanitary appliances - Communal washing troughs 5. Scope This document specifies requirements for the cleanability, load resistance and durability of communal washing troughs used for domestic purposes. NOTE For the purposes of this document, the term "domestic purposes" includes use in facry changing-rooms, sportsclubs, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s),

Page 12 7 abstention(s). Decision CEN/TC 163 C006/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Bidets - Functional requirements and test methods 5. Scope This European Standard specifies the functional requirements and test methods for bidets used for domestic purposes and made from either ceramics or stainless steel. All drawings are examples only, other forms are permissible. NOTE For the purposes of this standard the term domestic purposes includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s)

Page 13 M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C007/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Sanitary appliances - Wash basins - Functional requirements and test methods 5. Scope This European Standard specifies the functional requirements and test

Page 14 environmental? methods for wash basins for domestic purposes. NOTE 1 For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. NOTE 2 All drawings are examples only. The shape of the appliance is left the discretion of the manufacturer. Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C008/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N

Page 15 corresponds the revision of an EN. EN 997:2012+A1:2015 3. Document developed in drafting CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title WC pans and WC suites with integral trap 5. Scope This European Standard specifies constructional and performance requirements gether with test methods for close-coupled suites, onepiece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel. This European Standard does not apply squatting ilets, WC pans without integral trap or flushing cisterns as separate appliances. In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference cisterns in this standard is related only the definition and requirements of flushing volume. In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed be connected drinking water installations inside buildings. Before installation of WCs, EN 12056-2 and national requirements need be taken in consideration. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) 12. Related M/110

Page 16 directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C009/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Sanitary appliances - Specification for whirlpool baths 5. Scope This European Standard specifies requirements for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended be installed in indoor domestic situations and used in accordance with the manufacturer s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed be drained down

Page 17 environmental? after every use. They may be transported in several separate parts, for assembly on site, facilitate delivery. Safety of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60. Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard. For the purposes of this standard the term domestic situations includes use in hotels, accommodation for students, hospitals and similar buildings. Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed use whirlpool baths without supervision. NOTE 1 It is unrealistic expect manufacturers provide a definition of what constitutes a slow moving elderly or disabled person, or young children. The former is the responsibility of the individual or a carer. The latter is a parental responsibility. NOTE 2 When EN 60335 2-60 is amended cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard. Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s),

Page 18 7 abstention(s). Decision CEN/TC 163 C010/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Shower enclosures - Functional requirements and test methods 5. Scope This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfacry performance when used as intended. This European Standard does not apply shower cabinets or curtains and does not specify aesthetic and dimensional requirements. NOTE For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization

Page 19 11. Related mandate(s) 12. Related directive(s) M/110 Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C011/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Baths for domestic purposes

Page 20 5. Scope This document specifies requirements, test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for cleanability and durability. This document is applicable all sizes and shapes of baths. This document does not cover baths for use with medical provisions. NOTE 1 For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings. NOTE 2 Annex A lists characteristics of materials commonly used for manufacturing baths. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s).

Page 21 Decision CEN/TC 163 C012/2016 taken on 2016-09-12 Subject: CEN/TC 163 - Adoption of a New Work Item CEN/TC 163 - Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Shower trays for domestic purposes 5. Scope This European Standard specifies requirements, test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene. This standard is applicable all sizes and shapes of shower trays. This standard does not cover shower trays for use with medical provisions. NOTE 1 For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings. NOTE 2 Annex A lists characteristics of materials commonly used for manufacturing shower trays. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110

Page 22 12. Related directive(s) Directive reference For citation in Official Journal 305/2011 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). 7 CEN/TC 180 Decision CEN/TC 180 C02/2016 taken on 2016-09-20 Subject: CEN/TC 180 - Adoption of a New Work Item CEN/TC 180 - Decentralized gas heating having considered the proposal for a new work item as documented in CEN/TC 180 N corresponds 3. Document developed in drafting a new project CEN/TC 180/WG 1 - Non domestic gas-fired overhead radiant tube and luminous heaters - Safety and Efficiency. 4. Title Safety and energy efficiency of gas-fired luminous heaters for nondomestic premises

Page 23 5. Scope This European Standard specifies the requirements and test methods for the construction, safety, rational use of energy, classification and marking of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, referred in the of the text as appliances. This European Standard is applicable Type A1 and Type A3 appliances only (see 4.2.2) intended for use in other than residential dwellings: a) low gas pressure appliances operating at pressures up and including 50 mbar; b) medium gas pressure appliances operating at pressures above 50 mbar and up 2 bar. This European Standard is not applicable : - appliances designed for use in domestic dwellings; - outdoor appliances; - appliances of heat input in excess of 120 kw (based on the net calorific value of the appropriate reference gas); This standard is applicable appliances which are intended be type tested. Requirements for appliances which are not intended be type tested would need be subject further consideration. environmental? Other: Will be supplied later Other: Will be supplied later No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR BSI DIN NBN NEN UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 10 positive vote(s), 10 abstention(s).

Page 24 8 CEN/TC 195 Decision CEN/TC 195 15/2016 taken on 2016-09-30 Subject: CEN/TC 195 - Adoption of a New Work Item CEN/TC 195 - Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N corresponds the revision of an EN. EN 1822-1:2009 3. Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking 5. Scope This European Standard applies high efficiency particulate and ultra low penetration air filters (EPA, HEPA and ULPA) used in the field of ventilation and air conditioning and for technical processes, e.g. for applications in clean room technology or pharmaceutical industry. It establishes a procedure for the determination of the efficiency on the basis of a particle counting method using a liquid (or alternatively a solid) test aerosol, and allows a standardized classification of these filters in terms of their efficiency, both local and integral efficiency. environmental? Emissions air Bring in environmental expertise the WG No document from another organization 11. Related No

Page 25 mandate(s) 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR ASI DIN NBN NEN SFS SNV UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 13 positive vote(s), 6 abstention(s). Decision CEN/TC 195 16/2016 taken on 2016-09-30 Subject: CEN/TC 195 - Adoption of a New Work Item CEN/TC 195 - Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N corresponds the revision of an EN. EN 1822-2:2009 3. Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics 5. Scope This Part of ISO 29463 specifies the aerosol production and measuring

Page 26 environmental? equipment used for testing high efficiency filters and filter media in accordance with ISO 29463-3, ISO 29463-4 and ISO 29463-5, as well as the statistical basis for particle counting with a small number of counted events. Emissions air Bring in environmental expertise the WG an ISO document Identical ISO project reference: 29463-2 51836 11. Related mandate(s) No Issue year: 2011 ISO Project ID: 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 13 positive vote(s), 6 abstention(s). Decision CEN/TC 195 17/2016 taken on 2016-09-30 Subject: CEN/TC 195 - Adoption of a New Work Item CEN/TC 195 - Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N

Page 27 corresponds the revision of an EN. EN 1822-3:2009 3. Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media 5. Scope This Part of ISO 29463 specifies the test procedure for testing the efficiency of flat sheet filter media. Emissions air environmental? Bring in environmental expertise the WG an ISO document Identical ISO project reference: 29463-3 Project ID: 51837 11. Related mandate(s) No Issue year: 2011 ISO 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 13 positive vote(s), 6 abstention(s). Decision CEN/TC 195 18/2016 taken on 2016-09-30 Subject: CEN/TC 195 - Adoption of a New Work Item CEN/TC 195 - Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N

Page 28 corresponds the revision of an EN. EN 1822-4:2009 3. Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements-scan method 5. Scope This Part of ISO 29463 specifies the test procedure of the "scan method", considered be the reference method, for determining the leakage of filter elements. It is applicable filters ranging from classes ISO 35 H ISO 75 U. It also describes the other normative methods "oil thread leak test" (Annex A) and "Phometer leak test" (Annex B), applicable classes ISO 35 H ISO 45 H HEPA filters, and Leak Test with solid PSL Aerosol (Annex E). environmental? Emissions air Bring in environmental expertise the WG an ISO document Identical ISO project reference: 29463-4 51838 11. Related mandate(s) No 12. Related directive(s) No Issue year: 2011 ISO Project ID: 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 13 positive vote(s), 6 abstention(s).

Page 29 Decision CEN/TC 195 19/2016 taken on 2016-09-30 Subject: CEN/TC 195 - Adoption of a New Work Item CEN/TC 195 - Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N corresponds the revision of an EN. EN 1822-5:2009 3. Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements 5. Scope This Part of ISO 29463 specifies the reference test procedure for determining the efficiency of filters at their MPPS. It also gives guidelines for the testing and classification for filters with MPPS <0,1 m (Annex B) and filters using media with (charged) synthetic fibres (Annex C). environmental? Emissions air Bring in environmental expertise the WG an ISO document Identical ISO project reference: 29463-5 51839 11. Related mandate(s) No Issue year: 2011 ISO Project ID: 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate

Page 30 in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):100 13 positive vote(s), 6 abstention(s). 9 CEN/TC 197 DECISION N 011/2016 CEN/TC 197 on 2016-08-09 Subject: CEN/TC 197 - Appointment of Chairperson The CEN/TC 197 "pumps, considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; noting the nomination by the Technical Committee Secretariat; noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides appoint M. Guillaume PINTRAND (AFNOR) as Chairperson of CEN/TC 197 for a period of 3 years starting on 2017-01-01. The decision was unanimity or simple majority with 12 positive votes, and 4 abstentions. 10 CEN/TC 203 Decision CEN/TC 203 13/2016 taken on 2016-09-21 Subject: 3 year time-frame for the development of WI 00203053-9 month Tolerance Request. CEN/TC 203 - Cast iron pipes, fittings and their joints considering Resolution BT 34/2002 by which BT decided that any work item result in an EN, registered after 2002-10-31, shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, claim one lerance of 9 months, applicable the target dates for submission of a draft CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA);

Page 31 considering that for work item 00203053 - pren 877 rev - Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance, it proves impossible Dispatch ENQ draft CMC by 2016-04-20 claims a lerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons: matching CPR requirements ok more time than expected. Furthermore, indicative assessment still didn't receive feedback (launched in May) confirms that CEN/TC 203 will Dispatch ENQ draft CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by 2017-01-20 at the latest. The decision was simple majority with 13 positive vote(s), 1 negative vote(s) and 2 abstention(s). 11 CEN/TC 216 Decision CEN/TC 216 24/2016 taken on 2016-10-03 Subject: CEN/TC 216 - Adoption of a New Work Item CEN/TC 216 - Chemical disinfectants and antiseptics having considered the proposal for a new work item as documented in CEN/TC 216 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 216/WG 1 - Human medicine 4. Title Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) 5. Scope This European Standard specifies a test method simulating practical conditions for establishing whether a product for surgical handrub and handwash reduces the release of resident and eventually present transient microbial flora on hands when used for the treatment of clean hands of volunteers. This European Standard applies products for surgical handrub or handwash for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care,

Page 32 for example: - in hospitals, in community medical facilities and in dental institutions; - in clinics of schools, of kindergartens and of nursing homes. and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient. EN 14885 specifies in detail the relationship of the various tests one another and use recommendations. NOTE This method corresponds a phase 2, step 2 test. Discharges soil Discharges water Emissions air Use of materials Use of water environmental? Other: Decision taken during CEN/TC 216 plenary meeting (2010) regarding the foreword that have been added EN 14885:2015 No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: BSI DIN SFS SIS SNV Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):84 9 positive vote(s), 1 negative vote(s) and 7 abstention(s).

Page 33 12 CEN/TC 260 Decision CEN/TC 260 C619/2016 taken on 2016-10-03 Subject: 3 year time-frame for the development of WI 00260185-9 month Tolerance Request. CEN/TC 260 - Fertilizers and liming materials considering Resolution BT 34/2002 by which BT decided that any work item result in an EN, registered after 2002-10-31, shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, claim one lerance of 9 months, applicable the target dates for submission of a draft CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA); considering that for work item 00260185 - pren 15477 - Fertilizers - Determination of the water-soluble potassium content, it proves impossible Dispatch ENQ draft CMC by 2016-10-01 claims a lerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons: Further preparary work and consultation between experts of WG 7 is necessary in order consider the comments on pren 15477 and take a decision on the future of this Draft European Standard by WG 7. confirms that CEN/TC 260 will Dispatch ENQ draft CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by 2017-07-01 at the latest. The decision was simple majority with 12 positive vote(s), 5 abstention(s). 13 CEN/TC 335 Decision CEN/TC 335 2/2016 taken on 2016-10-06 Subject: CEN/TC 335 - Adoption of a New Work Item CEN/TC 335 - Solid biofuels having considered the proposal for a new work item as documented in CEN/TC 335 N

Page 34 corresponds a new project 3. Document developed in drafting CEN/TC 335 - Solid biofuels 4. Title Solid biofuels Grindability Determination - Part 1: Grindability determination of uncompressed fuels 5. Scope This document specifies a method for the grindability determination of uncompressed fuels e.g. wood chips, hog fuel, olive snes etc. None of the above. Lab test for biofuels with no environmental. address these environmental? Other: No environmental in this labstandard - Parallel ISO Lead ISO project reference: 21596-1 ISO Project ID: 71187 ISO TC: ISO/TC 238 No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AENOR AFNOR ASI DIN NBN NQIS/ELOT SFS UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):95 20 positive vote(s), 1 negative vote(s) and 0 abstention(s).

Page 35 14 CEN/TC 349 CEN/TC 349 Decision C1/2016 CEN/TC 349 Chairperson Subject: CEN/TC 349 - Re-appointment of the CEN/TC 349 Chairperson CEN/TC 349 Sealants for joints in building construction considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; noting the nomination by the Technical Committee Secretariat; noting the commitment of the professional standardization support from AFNOR; noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides re-appoint François ADELEU, as Chairman of CEN/TC 349 for a further 3-years, noting that François ADELEU is Chairperson of the Technical Committee since 15th May 2013. The decision was unanimity with 9 positive votes, 8 abstentions.