Bright Ideas. Innovative Solutions. Product Catalog. INDUSTRIAL AND HAZARDOUS Lighting Solutions

Bright Ideas. Innovative Solutions. Product Catalog INDUSTRIAL AND HAZARDOUS Lighting Solutions

INDUSTRIAL AND HAZARDOUS Lighting Solutions CATALOG SECTIONS INDUSTRIAL LIGHTING FIXTURE TYPES BOOTH LIGHTING LED LED Lighting for general purpose industrial, commercial applications, hazardous locations, paint/spray booths, outdoor, marine, low-bay, and inspection applications. INSPECTION LIGHTING SPECIALTY CUSTOM ACCESSORIES FLUORESCENT Fluorescent lighting fixtures available with an assortment of lamp options ranging from T5, T5HO, T8 and T8HO with a variety of wattages per our industrial fluorescent lighting series. FUNDAMENTALS OF LIGHTING LDPI, Inc. 4404 Anderson Drive Eau Claire, WI 54703 Toll Free: 1-800-854-0021 Fax: 715-839-8145 Web: www.ldpi-inc.com E-mail: sales@ldpi-inc.com

WHY LDPI? Our Company LDPI began designing, developing, manufacturing and distributing light fixtures in 1981. Since that time we have been recognized as an industry leader in fixtures that meet the physically demanding requirements of industrial environments. For many of our fixtures it is all about the mechanical enclosure that is designed, thoroughly tested and agency-approved to confirm their unique ability to withstand the rigorous environmental conditions they will be exposed to. We specialize in fixtures that illuminate areas that are hazardous in nature, but we are also known for industrial task, inspection, and general purpose fixtures that withstand the test of time while providing the correct amount of light to ensure that workers can clearly see what they are producing and assembling. Our Mission To be the #1 USA made fixture manufacturer who specializes in understanding how to design and manufacture lighting fixtures and control systems for industrial environments. Our Commitment We will use top quality materials in our fixtures. We will only purchase LED components from Tier 1 LED suppliers. We will ensure that when in operation our fixture operating temperatures will not exceed the maximum junction temperature (Tj) of the LED. We will continuously strive to create the maximum delivered lumens per watt that is physically possible. We will warrant our fixtures against defects caused in the manufacturing process. We will develop and communicate industry leading education through our sales team and website. We will train our sales, engineering and production staff to be focused on one thing only - Customer Satisfaction. We will listen to your requirements to design and develop a lighting and controls solution that is centric to your application and environment. We will strive to list all of our products to North American Safety Standards, Energy Star and DLC where applicable. We will certify that all of our fixtures are RoHS compliant. From refineries, chemical plants, wastewater treatment facilities, industrial processes, and other lighting applications that require superior illumination plus protection from water, corrosives, temperature extremes, and explosive gases, dusts or fibers, we will provide the best lighting possible. It s simple, think LDPI

CONTENTS LED LIGHTING FLUORESCENT INDUSTRIAL SERIES PAGE # LE101 5 LE121 6 LE181 7 LE182 8 LE155 9 LE201 10 LE202 11 LE203 12 LEVP 13 LE302 14 LE384 15 LEHS 16 240 LED 17 LE401 18 LEHL 19 LEHL1 20 H LED 21 LE551 22 380 LED 24 LEXF 26 229H 27 376 28 240 8 Ft. 29 384 30 240 31 440 2X4 32 440T/THO 33 380 34 BOOTH SERIES PAGE # LE151 39 LE155 40 LE481 41 LE482 42 Slim Light LED 43 400 LED 44 LE551 45 380 LED 47 229H 49 400 50 400SLB 51 Slim Light 52 380 53 ACCESSORIES Lens Film 55 Blast Booth Lens 55 Corner/Hip Mount 55 INSPECTION SERIES PAGE # LEINS2 59 LEINS3 60 LEINS4 61 INS2 62 INS3 63 SPECIALTY SERIES PAGE # Task Cart 67 Multi Fixture Task Cart Explosion Proof Cart 68 69 Custom Lighting 70 FUNDAMENTALS SERIES PAGE # Glossary 73 Lighting Fundamentals 74 IP Code 75 Light: Levels and Color Weights - Shipping 75 76 Did you know... LDPI, Inc. has been manufacturing Hazardous Location and Specialty Lighting Solutions for over 35 years! Warranty Statement: LDPI, Inc. warrants LED fixtures for 5 years and non LED fixtures for 1 year in accordance with the limited warranty policy that can found on our website at: http://www.ldpi-inc.com/warranty.

INDUSTRIAL LIGHTING

INDUSTRIAL LIGHTING SERIES Class I D1 Class I D2 Class II Class III Corrosion Resistant Paint Spray Marine Wet Damp General Industrial Page # LE101 5 LE121 6 LE181 7 LE182 8 LE155 9 LE201 10 LE202 11 LE203 12 LEVP 13 LE302 14 LE384 15 LEHS 16 240 LED 17 LE401 18 LEHL 19 LEHL1 20 H LED 21 LE551 22 380 LED 24 LEXF 26 229H 27 376 28 240 8 Ft. 29 384 30 240 31 440 2x4 32 440 T/THO 33 380 34 Marine: = Outside Salt Water (UL 1598A) We use our best effort to make our catalog accurate. We reserve the right to correct typographical errors and omissions. Specifications may be changed subsequent to printing. LED LIGHTING FLUORESCENT

APPLICATIONS Industrial General Lighting Task Lighting The LE101 Series is an ordinary location LED fixture that is available in 4 Ft. and 8 Ft. lengths. This fixture is ideal for warehouses, general industrial areas or other locations where task/ area lighting is needed. 20 Gauge Steel Powder Coated White Housing Acrylic or Polycarbonate Lens Commercial & Institutional Facilities UL 1598 CSA 22.2 No. 250.0 UL 8750 CSA 22.2 No. 250.13 35 C Ambient Rating LE101 ORDINARY LOCATION INDUSTRIAL Example: LE101-79-5-V1-C-S-SM-AC-EM 1 2 3 4 5 6 7 8 9 1 SERIES 2 LUMENS* 3 CCT 4 VOLTAGE 5 SUPPLY LE101 39: 3900Lm 59: 5900Lm 79: 7900Lm 118: 11800Lm 3: 3500K 4: 4000K 5: 5000K V1: 120-277V (driver voltage) C: 6 Ft. blunt end cord CP1: 6 Ft. cord with 120V twist lock plug CP2: 6 Ft. cord with 277V twist lock plug 6 LENGTH* 7 MOUNTING 8 LENS 9 OPTIONS NOTES S: 4 Ft. T: 8 Ft. SM: Surface mount AM: 45 angle mount Model # Rows AC: Clear acrylic PC: Clear polycarbonate PD: Diffused polycarbonate Nominal Lumen Output at 5000K 4Ft Wattage EM: Battery/Driver Backup (90 Min.) Input Current (A) Nominal Lumen Output at 5000K Fixtures supplied with a cord are intended for overhead/ceiling mounting with electrical outlet mounted directly overhead. *8 Ft. fixtures are made from (2) 4 Ft. fixtures factory assembled in tandem. 8Ft Wattage Input Current (A) LE101-39 1 3900 37 0.31-0.12 7800 74 0.62-0.27 LE101-59 2 5900 52 0.44-0.19 11800 104 0.88-0.38 LE101-79 2 7900 74 0.62-0.27 15800 147 1.23-0.53 LE101-118 3 11800 111 0.93-0.39 23600 222 1.85-0.80 4ft. Shown 48.13" (1222.5mm) 4ft. Shown 8ft. Shown 96.31" (2446.3mm) 9.13" (231.9mm) 3.19" (81.0mm) LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 5

INDUSTRIAL LE121 ORDINARY LOCATION The LE121 fixture is a Linear High Bay premium fixture with directional LED elements to adjust and focus the lumen output directly on task areas. Highly customizable to provide the desired lumen output, color temperature, directional and controllable to suit any general application. 18Ga. Steel White Powder Coat Extruded Aluminum Housing UL1598 CSA 22.2 No. 250.0 UL8750 CSA 22.2 No. 250.13 50 C Ambient Rating APPLICATIONS Warehouses Aisle Lighting Task/Assembly Commercial Medical Institutions/Schools Example: LE121-P22-4-2-V1-D1-C1-D-5-PW-WG 1 2 3 4 5 6 7 8 9 10 11 1 SERIES 2 POWER 3 LENGTH 4 ROWS 5 VOLTAGE 6 DIMMING LE121 P16 V1: 120-277V P22 V2: 347V 4: 4 Ft. 6: 6 Ft. 8: 8 Ft. 2: 2 Row 3: 3 Row 4: 4 Row 7 CORD 8 LENS 9 CCT 10 FINISH 11 OPTIONS NOTES BLANK: No Cord C1: Blunt End C2: 120V Plug C3: 277V Plug D: Diffuser P: Polycarbonate A: Acrylic 3: 3500K 4: 4000K 5: 5000K PW: Powder Coat White PB: Powder Coat Black OC: Programmable Sensor CB: Cable Mount CM: Ceiling Mount WG: Wire Guard EM: EM: Battery/Driver Backup (90 Min.) BLANK: No Dimming D1: 0-10V (Std.) D2: DALI D3: Use with OC *OC: Occupancy Sensor is factory pre-set for 100% output when turned on. The fixture will automatically dim to 10% output with no motion in 5 minutes; no motion after 60 minutes, the fixture turns off. Occupancy sensor operation can be field adjusted with programming remote, (item# 14539) sold separately. 22 (559mm) 4 Ft.: 46 (1168mm) 6 Ft.: 68 (1727mm) 8 Ft.: 90 (2286mm) 7 (178mm) Directional Adjustment 3 row shown with shroud cutaway to show directional feature. WG: Wire Guard Option 6 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS General Lighting Clean Rooms The LE181 Series is a hinged, front access, recessed mount, LED luminaire. The LE181 is made of a combination of 20 gauge cold rolled steel and.090 aluminum. This LED fixture is available in 4 Ft. lengths with 1, 2, or 3 rows of LED s. This fixture can be used with or without optics, has dimming capabilities, and is available with an EM option. 20 Gauge Steel Powder Coated White Housing Hinged, Inside (Front) Access 4 Ft. Length 3 Wire Whip 8 Standard Clear Tempered Glass Lens CSA 22.2 No. 137.0 No. 250.0, and No. 250.13 55 C Ambient Rating LE181 ORDINARY LOCATION - FRONT ACCESS INDUSTRIAL Example: LE181-58-V1-A-D1-4-CP1 1 2 3 4 5 6 7 1 SERIES 2 POWER 3 VOLTAGE 4 OPTIC LE181 58: 58W (6985Lm) 1 Row 73: 73W (8700Lm) 1 Row V1: 120-277VAC, 50/60Hz Blank: None A: Diffused Acrylic 115: 115W (13970Lm) 2 Rows 145: 145W (17400Lm) 2 Rows 172: 172W (20955Lm) 3 Rows 218: 218W (26100Lm) 3 Rows 5 DIMMING 6 CCT 7 ADD-ON OPTIONS Blank: None D1: 0-10V (Additional Hub Required) 3: 3500K 4: 4000K 5: 5000K SP: Surge Protector EM: Battery/Driver Backup (90 Min.) CP1: Cord 6Ft 120V Twist Lock CP2: Cord 6Ft 277V Twist Lock CP3: Cord 6Ft 120V Straight Blade CP4: Cord 6Ft 277V Straight Blade Type Model A B C D 4 Ft. LE181-58 1 Row LE181-73 9 5/16" 13 1/16" 10 3/4" 7" 4 Ft. LE181-115 2 Rows LE181-145 14 5/16" 18 1/16" 15 3/4" 12" 4 Ft. LE181-172 3 Rows LE181-218 19 5/16" 23 1/16" 20 3/4" 17" HUB 1 - POWER LEADS 2 1/4" B A HUB 2 - DIMMING LEADS 51 7/8" 50" 1 1/8 50 1/4 16 16 16 1 7/8 C HOLE DETAIL (4 FT. FIXTURES) 5/16 TYP 1/2 TYP 5/16 DIA. 12 Holes D *Hub 2 with Dimming option only Consult factory for other hub locations 50 7/8 1 7/8 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 7

INDUSTRIAL LE182 ORDINARY LOCATION - REAR ACCESS The LE182 Series is a hinged, rear access, surface mount LED luminaire. The LE182 is made of a combination of 20 Ga. cold rolled steel and.090 aluminum. It is available in a 4 Ft. length with 1, 2, and 3 rows of LEDs. This fixture can be used with or without optics, has dimming capabilities, and is available with an EM option. 20 Gauge Steel Powder Coated White Housing Hinged, Rear Access Panel 4 Ft. Length Clear Tempered Glass Lens 3 Wire Whip (8 ) Standard UL 1598 Wet/Damp CSA 22.2 No. 137.0, No. 250.0, No. 250.13 55 C Ambient Rating APPLICATIONS General Lighting Clean Room Example: LE182-73W-V1-A-D1-4-SP 1 2 3 4 5 6 7 1 SERIES 2 POWER 3 VOLTAGE 4 OPTIC LE182 58: 58W (6985Lm) 1 Row 73: 73W (8700Lm) 1 Row V1: 120-277VAC, 50/60Hz BLANK: None A: Diffused Acrylic 115: 115W (13970Lm) 2 Rows 145: 145W (17400Lm) 2 Rows 172: 172W (20955Lm) 3 Rows 218: 218W (26100Lm) 3 Rows 5 DIMMING 6 CCT 7 ADD-ON OPTIONS Blank: None D1: 0-10V (Additional Hub Required) 3: 3500K 4: 4000K 5: 5000K SP: Surge Protector EM: Battery/Driver Backup (90 Min.) PG: Prismatic Glass CP1: Cord 6Ft 120V Twist Lock CP2: Cord 6Ft 277V Twist Lock CP3: Cord 6Ft 120V Straight Blade CP4: Cord 6Ft 277V Straight Blade 50 1/4 50" 52 3/8" 3 1/2" 1 1/8 16 16 16 1 7/8 C 5/16 TYP HOLE DETAIL (4 FT. FIXTURES) 1/2 TYP 5/16 DIA. 12 Holes D 50 7/8 1 7/8 HUBS LOCATED HERE A B Note: Secondary hub for dimming option only. Consult factory for other hub locations Type Model A B C D 4 Ft. LE182-58 10 1/2" 12 1/2" 10 3/4" 7" 1 Row LE182-73 HUB LOCATIONS 23 7/8 23 7/8 4 Ft. 2 Rows LE182-115 LE182-145 15 1/2" 17 1/2" 15 3/4" 12" 4 Ft. 3 Rows LE182-172 LE182-218 20 1/2" 22 1/2" 20 3/4" 17" SECONDARY HUB (D1 DIMMING OPTION) 2 PRIMARY HUB (LINE VOLTAGE) 8 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Industrial Task Commercial & Institutional Facilities The LE155 is designed and listed for ordinary locations. This product is ideal for task, overhead, and paint booth (behind the glass) applications. Compact design with amiable LED s illuminate allows focusing the light on the task. 20 Gauge Steel and Aluminum Housing Powder Coat Black Finish Polycarbonate Lens Clear or Diffused impact resistant lens UL1598 CSA 22.2 No. 250.0 UL8750 LE155 ORDINARY LOCATION INDUSTRIAL Example: LE155-S-4-V1-4-2-AS-D-C 1 2 3 4 5 6 7 8 9 1 SERIES 2 POWER 3 CCT 4 VOLTAGE 5 LENGTH LE155 S: 58W H: 73W 3: 3000K 4: 4000K 5: 5000K V1: 100-277VAC 4: 4Ft 8: 8Ft 6 ROWS 7 MOUNT 8 LENS 9 OPTIONS 1: 1 Row 2: 2 Row 3: 3 Row 4: 4 Row AS: Surface Mount HY: Hanging Mount UM: Universal - No Frame Blank: None D: Diffused C: Cord - 5.5 Ft. 16/3 SOOW 600V 90 C.380 OD Blunt End CP1: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V NEMA L5-15P CP2: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V Plug: NEMA L7-15P (277 Volt, 15 Amp, Twist Lock) CP3: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V NEMA 5-15P CP4: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V NEMA 7-15P D1: Dimming (0-10V) D2: Dimming (Dali) EM: Battery/Driver Backup (90Min.) UL924 SP: 10Kv Surge Protector AS: Surface Mount The Surface Mount option utilizes mounting tabs that can be surface mounted to the structure in any configuration. Surface Mount Tabs allow for fixture to be mounted on Uni-strut type or other square tube structure HY: Hanging Mount The Hanging Mount option utilizes a frame that can house up to 4 light bar modules. Utilizing an easy mount system, the mounting adapter is attached to the structure and the frame has tabs that allow the fixture to be easily hung on the adapters for quick installation. Each individual Light Bar Module can be easily positioned or aimed at the work surface for optimal illumination. UM: Universal - No Frame Features a remote driver box that will house the driver(s), with a low voltage cable run to each Light Bar Module. Individual Light Bar Modules are available in 4 Ft. or 8 Ft. lengths and are adjustable to aim the light on the task. Light Bar Modules are easily surface mounted to any flat surface or structure and can be up to 200 Ft. away from the Remote Driver enclosure. This flexibility allows for multiple light bar configurations to illuminate any application. LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 9

INDUSTRIAL LE201 WET / DAMP The LE201 is a 2 Ft. wet/damp listed fixture featuring a die cast aluminum housing and an acrylic or polycarbonate lens. With an IP66 rating, this wide distribution fixture is ideal for wash and prep bays, parking garages, and industrial areas. Die-cast aluminum housing White powder coat finish Acrylic and polycarbonate lenses Specular aluminum reflector One piece silicone gasket UL 1598 Wet / Damp CSA 22.2 No. 250.0 UL 8750 CSA 22.2 No. 250.13 IP66 45 C Ambient Rating APPLICATIONS Food & Beverage Industrial Pulp & Paper Shipyards / Marine Water Treatment Example: LE201-P79-50-V1-VAF-C-M-W 1 2 3 4 5 6 7 8 1 SERIES 2 SOURCE 3 CCT 4 VOLTAGE LE201 P37: 37W (3000Lm) 50: 5000K V1: 120-277V P57: 57W (4100Lm) P79: 79W (5250Lm) P100: 100W (6050Lm) 5 LENS 6 SUPPLY 7 MOUNT 8 FINISH VAP: V-shaped Clear Acrylic Patterned Lens VAF: V-shaped Frosted Acrylic Patterned Lens VPC: V-shaped Clear Polycarbonate Patterned Lens C: Cord with blunt end CP1: Cord with IP rated twist lock plug 120V CP2: Cord with IP rated twist lock plug 277V M: Surface mount bracket Uses standard snap on stainless steel brackets included W: White powder coat B: Black powder coat R: Raw aluminum 26 1/16" Led Modual 7 13/16" Reflector Led Modual Cord Grip Only On Fixture If Ordered With The Corded Option Cast Aluminum Housing Enclosure With Cooling Fins 16" 3 5/8" 6 3/4" Stainless Steel Mounting Brackets 7 1/16" Lens 2" 5/16" Ø 3/4" Conduit Knock-out Holes In Both Ends Of Casting Ø 1/4" X 5/8" Slot 10 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Food & Beverage Industrial Pulp & Paper Suitable for interior or exterior applications. This LED, lightweight, vapor tight, nonmetallic fixture is ideal for corrosive or wet/damp environments. The LE202 fixture features a fiberglass housing with an acrylic frosted or acrylic frosted ribbed lens, a continuous gasket design, and comes standard with surface mount brackets. The LE202 is ideal for commercial industrial or institutional applications providing maximum light output where humidity, dust, or fumes are possible. The LE202 is resilient against corrosion and weathering and is available in 2 and 4 fixture lengths. Fiberglass: 5VA UL rated Acrylic ribbed frosted lens or Acrylic frosted lens >50,000 hours High Pressure tested at 1500psi IP67 - Housing Only Shipyards / Marine Water Treatment UL 1598A Marine Inside CSA 22.2 No. 250.0 UL 8750 CSA 22.2 No. 250.13 NEMA 4X NSF (enclosure only) 30 C Ambient Rating LE202 WET / DAMP INDUSTRIAL Example: LE202-38-3-V1-4-AF-SM-SL 1 2 3 4 5 6 7 8 1 SERIES 2 LUMENS 3 CCT 4 VOLTAGE LE202 38: 42W (3850Lm*) (2 Ft.) 3: 3500K V1: 120-277V 77: 84W (7700Lm*) (4 Ft.) 4: 4000K *Nominal Lumens 5: 5000K 5 LENGTH 6 LENS 7 MOUNT 8 OPTIONS 2: 2 Ft. 4: 4 Ft. ARF: Acrylic ribbed frosted lens AF: Acrylic frosted lens SM: surface mount bracket AM: 45 angle mount SL: Stainless steel latches EM: Battery/Driver Backup (90 Min.) B ARF: Standard Acrylic ribbed frosted lens depth: 2.13 Acrylic frosted lens depth: 3.5 A C D AF: Acrylic frosted lens 5.75 PART # A B C D LE202-38 27.25 4.25 6.75 7.33 LE202-78 51.75 4.25 6.75 7.33 B measurement: with acrylic ribbed frosted lens is 4.25" B measurement with acrylic frosted lens is 5.75 Std. Latch Detail Offers a huge advantage over more traditional enclosures. Durable, stainless steel Mounting hardware. No drilling necessary for the housing for installation. Installation time is dramatically reduced, providing lower installation costs. STANDARD Mounting BRACKET Kits Included with each fixture P/N 6686: Two brackets per kit. 1 kit needed per fixture. OPTIONAL Mounting 45 Mounting bracket kit P/N 5102 - Kit includes: (2) 45 brackets (2) 5081 brackets 3 9/32 45 Standard Mounting bracket 45 Mounting option LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 11

INDUSTRIAL LE203 WET / DAMP Suitable for interior or exterior applications. This LED, lightweight, vapor tight, nonmetallic fixture is ideal for corrosive or wet/damp environments. The LE203 fixture features a fiberglass housing with an acrylic frosted or acrylic frosted ribbed lens, a continuous poured in place gasket design, and comes standard with surface mount brackets. The LE203 is ideal for commercial industrial or institutional applications providing maximum light output where humidity, dust, or fumes are possible. The LE203 is resilient against corrosion and weathering and is available in 2, 4, and 8 fixture lengths. Fiberglass: 5VA UL rated >50,000 hours High Pressure Tested at 1500psi IP67 - Housing Only APPLICATIONS Food & Beverage Industrial Pulp & Paper UL 1598A CSA 22.2 No. 250.0 UL 8750 CSA 22.2 No. 250.13 NEMA 4X NSF (enclosure only) -20 C to 35 C Ambient Rating Shipyards / Marine Water Treatment Example: LE203-77-4-V1-4-AF-SM-EM 1 2 3 4 5 6 7 8 1 SERIES 2 LUMENS 3 CCT 4 VOLTAGE LE203 38: 37W (4000Lm*) (2 Ft.) 3: 3500K V1: 120-277V 77: 73W (8000Lm*) (4 Ft.) 4: 4000K 154: 145W (16000Lm*) (8 Ft.) 5: 5000K *Nominal Lumens 5 LENGTH 6 LENS 7 MOUNT 8 OPTIONS 2: 2 Ft. 4: 4 Ft. 8: 8 Ft. ARF: Acrylic Ribbed Frosted Lens AF: Acrylic Frosted Lens ASF: Acrylic Shallow Frosted Lens (4 Ft. only) SM: Surface Mount Bracket AM: 45 Angle Mount SL: Stainless Steel Latches PART # A B C D LE203-38 27.25 4.25 6.75 7.33 LE203-77 51.75 4.25 6.75 7.33 LE203-154 100.19 4.25 6.75 7.33 B measurement: with acrylic ribbed frosted lens is 4.25" B measurement with acrylic frosted lens is 5.75 B measurement with acrylic shallow frosted lens is 4" Acrylic ribbed frosted lens depth: 2.13 Acrylic frosted lens depth: 3.5 Acrylic shallow frosted lens depth: 2.03 A ARF: Standard AF: Acrylic frosted lens ASF: Acrylic shallow frosted lens Std. Latch Detail B 5.75 4 C D Offers a huge advantage over more traditional enclosures. Durable, stainless steel mounting hardware. No drilling necessary for the housing for installation. Installation time is dramatically reduced, providing lower installation costs. STANDARD Mounting BRACKET Kits Included with each fixture P/N 6686: Two brackets per kit. 1 kit needed per fixture. OPTIONAL Mounting 45 Mounting bracket kit P/N 5102 - Kit includes: (2) 45 brackets (2) 5081 brackets 45 3 9/32 45 Mounting option Standard Mounting bracket 12 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Food & Beverage Industrial Pulp & Paper Shipyards / Marine Water Treatment LEVP vapor proof fixtures are designed to replace traditional 100 watt incandescent and 23 watt CFL type fixtures. The LEVP features long lasting LED construction and are suitable for wet and damp locations where moisture is present. Powder Coated Cast Aluminum 1/2 NPT Multiple Conduit Entries Suitable For Inverted Mounting Low Profile Ceiling Mount UL1598 Wet / Damp CSA 22.2 No. 250.0 UL8750 CSA 22.2 No. 250.13 LM-79, LM-80 IP66 40 C Ambient Rating CRI 65 LEVP WET / DAMP INDUSTRIAL Example: LEVP-14-U-53-G2-C 1 2 3 4 5 6 1 SERIES 2 POWER 3 VOLTAGE LEVP 14: 14W (1123Lm) (clear) U: 120-277V, 50/60HZ 4 CCT 5 OPTICS 6 MOUNT 53: 5300K L1: Clear Low Profile Polycarbonate L2: Frosted Low Profile Polycarbonate G1: Clear Glass Globe & Guard G2: Frosted Glass Globe & Guard C: Ceiling 1/2 NPT P: Pendant 1/2 NPT W: Wall 1/2 NPT 5.56 3.50 7.35 5.46 10.93 9.45 11.23 9.10 11.26 9.09 4.15 4.52 5.391 3.465 4.15 4.52 4.15 4.52 7.350 5.462 5.091 5.413 5.450 4.031 4.031 4.031 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 13

INDUSTRIAL LE302 MARINE The LE302 Series is an energy efficient alternative to Metal Halide and High Pressure Sodium HID fixtures. This copper-free, cast aluminum fixture is designed for indoor and outdoor applications including: marine, high bay, low bay, and flood applications. This fixture incorporates high power LED s with multiple optical distribution patterns, surge protection. Copper-Free Cast Aluminum housing Captive Stainless Steel Fasteners and Insert Tempered Glass Lens Light Weight Compact Design (25 Lbs.) APPLICATIONS Marine/Coastal Facilities Chemical Plants UL 1598 CSA 22.2 No. 250.0 UL 1598A Marine Outside, Marine Inside, Drip Proof UL 8750 CSA 22.2 No. 250.13 IP66 Petroleum Refineries Power Plants NEMA 4X -35 C to 50 C Ambient Rating (L1, L2, and L3 only) -35 C to 40 C Ambient Rating (L4 and L5) Example: LE302-L1-V1-4-F1-T1-C-CP1 1 2 3 4 5 6 7 8 1 SERIES 2 SOURCE 3 VOLTAGE 4 CCT 5 MOUNT 6 OPTICS 7 LENS LE302 L1: 5000Lm (40W) L2: 8500Lm (70W) L3: 11500m (100W) L4: 15500Lm (130W) L5: 19000Lm (160W) V1: 120-277VAC (130-300VDC) V2: 277-480VAC (295-795VDC) (L2, L3 only) 4: 4000K 5: 5000K 8 OPTIONS F1: Ceiling 1/2 Hub F2: Ceiling 3/4 Hub F3: Pendant 3/4 Hub F4: Yoke mount 1/2 Hub X1: Wall mount 1 Hub X2: Stanchion 1 1/4 Threaded X3: Angled stanchion 1 1/4 Threaded X4: Stanchion 1 1/2 Threaded X5: Angled stanchion 1 1/2 Threaded T1: Type I T2: Type II T3: Type III F: Type V Wide 120 Diffused Lens* N: Type V Narrow 20 M: Type V Medium 59 W: Type V Wide 93 *If selecting F optic leave 7 LENS Blank C: Clear Tempered Glass A: Acrylic Lens Clear L1.L2,L3 only) P: Polycarbonate Lens Clear (L1,L2,L3 only) C: Cord - 5.5Ft 16/3 SOOW 600V 90 C.380 Od Blunt End 2 CP1: Cord 9.5Ft 16/3 SOOW (.38 Dia) Rated 105 C 600V NEMA L5-15P 3 CP2: Cord 9.5Ft 16/3 SOOW (.38 Dia) Rated 105 C 600V Plug: NEMA L7-15P (277 Volt, 15 Amp, Twist Lock) 3 D1: Dimming (0-10V) D2: Dimming (DALI) EM: Battery/Driver Backup (90min.) (L1 only) UL924 G: Aluminum Lens Guard PB: Black Powder Coat Finish PW: White Powder Coat Finish PG: Gray Powder Coat Finish SP: 10Kv surge protector Notes: 1. Natural unpainted finish -Standard 2. Cord Option C applies to Ordinary location and Marine Outdoor listings only 3. Cord Options CP1 or CP2 apply to Ordinary location and Marine indoor listings only. L1, L2, L3 L4, L5 Optional Lens Guard 14 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Oil/Gas Pulp/Paper Shipyards/Marine Meets all Coast Guard specifications. Streamlined design provides eye appeal and ruggedness. Designed to withstand strong vibration. T4 (135 C) operating code. Adjustable mounting brackets included. Corrosion resistant, Low copper content aluminum Zinc plated latches are standard 3/4 NPT hubs Neoprene gasket 2 Ft.: 23 Lbs. 4 Ft.: 32 Lbs. Water Treatment Drill Rigs Offshore Platforms UL 844 CSA 22.2 No. 137.0 UL 1598A Marine Outside UL 1598 Wet / Damp CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D T4 135 C 40 C Ambient Rating LE384 MARINE INDUSTRIAL Example: LE384-L1-V1-4-D 1 2 3 4 5 1 SERIES 2 SOURCE 3 VOLTAGE 4 CCT 5 OPTIC Notes: *3760Lm with Diffused Optic LE384 L1: 2 Ft. 34w, 4400Lm* V1: 100-277VAC 4: 4000K BLANK: None 120 **7520Lm with Diffused Optic L2: 4 Ft. 67w, 8800Lm** 5: 5000K D: Diffused 120 Adjustable mounting brackets included LE384 Series Dimensions (Inches) (Nominal) LENGTH A B C D E 4 Ft. 51.6 50.0 6.3 6.5 8.7 2 Ft. 26.0 26.0 6.3 6.5 8.7 4.63" (117.6mm).38" (9.7mm) (2) PLCS 48.81" (1239.8mm) 3/4 NPT E C D B A LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 15

INDUSTRIAL LEHS HAZARDOUS The LEHS is designed and listed for CI D2 hazardous, marine, and wet locations. This product is ideal for retrofitting High Pressure Sodium (HPS) and Metal Halide(MH) fixtures for increased energy savings and maintenance. Copper Free Aluminum Powder Coat Gray All exposed fasteners are stainless steel Polycarbonate Lens Light weight compact design APPLICATIONS Chemical Processing Industrial Oil / Gas CI D2, Grps A,B,C,D UL 1598A Marine Outside UL 1598 Wet Locations -40 F to 122 F Ambient Rating RH Ambient Humidity 5% to 95% T-Code: CI D2 = T3C IP66 Shipyards / Marine Water Treatment Example: LEHS-L1-V1-4-V110-C 1 2 3 4 5 6 1 SERIES 2 SOURCE 3 VOLTAGE 4 CCT 5 OPTICS 6 LENS NOTE: Product comes standard with: 2 SIDE HUBS, U-Bracket pre-installed LEHS L1: 2Ft. 40W, 5480Lm V1: 100-277VAC 3: 3000K V110: 110 TYPE V C: Clear 10Kv surge protector built in L2: 4Ft. 80W, 10960Lm V2: 347-480VAC 4: 4000K D: Diffused 3 SJTOW-18/3 Wire Whip (Factory 5: 5000K installed) Ceiling Wall Pendant Chain Hang Pole Note: Chain Hang and Pole Mount Accessories Field Installed - Order Separately - Contact Factory 40W 7.55 in / 192 mm QTY 8 Ø.33 in / 8.5 mm 2.75 in / 70 mm 2.83 in / 58 mm.39 in / 10 mm R5 7.48 in / 190 mm QTY 2 Ø 6.5 Ø 1.41 in 36 mm 23.62 in / 600 mm 7.55 in / 192 mm 3.14 in / 80 mm 50 3.14 in / 80 mm 7.87 in / 200 mm 25.6 5 in / 127 mm 80W 47.24 in / 1200 mm 5 in / 127 mm 16 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Chemical / Oil / Gas Metals & Mining Water Treatment The 240 LED Series is a very versatile fixture for use in hazardous environments. It is an ideal fixture for industrial applications, wet locations and task lighting. Optional adjustable mounting brackets allow for precise aiming in multiple angles suitable for most applications. With multiple hub locations, the 240 LED Series can meet most of your wiring needs. LED lamps included. 18Ga. Steel White Powder Coat Hinged Front Door Hinged Ballast Tray Tempered Glass Lens Pendant Mount - Standard Feed Though Wiring - Standard CI D2 Grps A,B,C,D. CII D2 Grps F,G CIII UL844 CSA 22.2 No. 137.0 UL1598 Wet / Damp CSA 22.2 No. 250.0 UL8750 CSA 22.2 No. 250.13 IP 65 40 C Ambient Rating 240 LED HAZARDOUS INDUSTRIAL Example: 240-LED-S-5-4L-UNV1-TS-AM 1 2 3 4 5 6 7 1 SERIES 2 SOURCE 3 CCT 4 LAMP QTY 5 VOLTAGE 6 HUB 7 OPTIONS 240-LED L: Low Ballast Factor S: Standard Ballast Factor H: High Ballast Factor 4: 4000K 5: 5000K UNV1: 120-277V 347: 347V TS: Top and Side Hubs *Contact LDPI for availability of 5000K Lamp versions 2L: 2 Lamps 3L: 3 Lamps 4L: 4 Lamps 5L: 5 Lamps 6L: 6 Lamps SS: Stainless Steel Housing AM: Adjustable Mounting Brackets for Surface Mounting CB: Cable Mount: (Includes 5 Cable) F: Fusing W: Wire Guard P: Polycarbonate Lens A: Acrylic Lens PERFORMANCE 1/2 NPT HUBS 1/2 NPT BOTH ENDS Lamp Qty. 2 Lamp Source (Ballast Factor) L: Low S: Standard H: High Average System Watts 25 29 37 Initial Lumen Output 2900 3300 4000 INTEGRATED ACCESS DOOR HINGE 3 Lamp L: Low S: Standard H: High 37.5 43.5 55.5 4350 4950 6000 A 4 Lamp L: Low S: Standard H: High 50 58 74 5800 6600 8000 51 1/2" 53 1/8" 5 Lamp 6 Lamp L: Low S: Standard H: High L: Low S: Standard H: High 62.5 72.5 92.5 75 87 111 7250 8250 10000 8700 9900 12000 5 5/16 A: 2 LAMP: 12 3/16" 3 & 4 LAMP: 16 3/16" 5 & 6 LAMP: 20 11/16" HINGED REFLECTOR BRACKETS FOR OPTIONAL MOUNTING KITS Fixture Operating Temperature codes Based on 40 C Ambient Class I, D2 Groups A, B, C & D Class II D2 Groups F & G Class III 240 LED T5=100 C T4A=120 C T4A=120 C ROTARY DRAW LATCHES HINGED DOOR FRAME LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 17

INDUSTRIAL LE401 HAZARDOUS The LE401 Series is an energy efficient alternative to hazardous location Metal Halide and High Pressure Sodium HID fixtures. This copper-free, cast aluminum fixture is designed for indoor and outdoor applications including: hazardous, marine, high bay, low bay, and flood applications. This fixture incorporates 24 high power LED s with multiple optical distribution patterns and comes standard with a CCT of 5000K. Copper-Free Cast Aluminum Captive SS Fasteners / Insert UL 844 CSA 22.2 No. 137.0 UL 1598 Wet/Damp, Paint Spray CSA 22.2 No. 250.0 UL 1598A Marine Outside UL 8750 CSA 22.2 No. 250.13 CI D2 Grps A,B,C,D T3C 160 C CII D2 Grps F,G T5 100 C CIII IP 66 and NEMA 4X 50 C Ambient Rating APPLICATIONS Chemical / Oil / Gas Shipyards / Marine Water Treatment Example: LE401-P11-V1-F3-M-C 1 2 3 4 5 6 1 SERIES 2 SOURCE 3 VOLTAGE 4 MOUNT 5 OPTICS 6 OPTIONS LE401 P11: 107W* (11000Lm) P8: 82W* (9000Lm) P5: 55W* (6400Lm) *Nominal Watts V1: 120-277V V2: 277-480V (55 Watt only) F1: Ceiling 1/2 hub F2: Ceiling 3/4 hub F3: Pendant 3/4 hub F4: Yoke mount 1/2 hub X1: Wall mount 1 hub X2: Stanchion 1 1/4 threaded X3: Angled stanchion 1 1/4 threaded X4: Stanchion 1 1/2 threaded X5: Angled stanchion 1 1/2 threaded T1: Type I T2: Type II T3: Type III F: Type V frosted** N: Type V narrow 16 FWHM** M: Type V medium 70 FWHM** W: Type V wide 120 FWHM** C: 3 Ft. cord with blunt end (F4 mount only) D: Dimming (0-10V dimming driver) (Can not be ordered with a corded option) G: Lens guard 4K: CCT of 4000K 7K: CCT of 7000K PB: Black powder coat finish PW: White powder coat finish PG: Gray powder coat finish BLANK: Natural unpainted finish Notes: **Optic Types F, N, M and W are available for the Type V optics only. 12 5 3/4" 12 4" Ø 3/8" X 5/8" SLOT Ø3/8" TYP 2" Ø 9/16" 5/8" 12 4 3/4" 12 5 1/8" 1/2" & 3/4" NPT (2 PLCS) F1 & F2 MOUNT 5 1/8" 3/4" NPT 6 3/16" Equivalent HID (Metal Halide) Watts* LED Metal Halide 55 100 82 150 1.25 or 1.5 NPT STRAIGHT OR ANGLED at 25 X2-X5 MOUNT 1 NPT 2 PLCS (X1 MOUNT) 2 7/16" 3 1/4" Ø 13/32" TYP 107 250 *For reference only..ies files available upon request. 7 9/16" 18 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Chemical Processing Industrial Oil / Gas The LEHL LED Series is designed to be an energy efficient solution to conventional hazardous location light fixtures. This compact, light-weight fixture has an aluminum housing, multiple lumen options, a CCT of 5000K and is available with a variety of mounting options. Powder Coated Gray Cast Aluminum Tempered Glass Lens Shipyards / Marine Water Treatment CI D2 Grps A,B,C,D CII D2 Grps F,G UL844 UL1598 Wet Locations IP66 DLC LEHL HAZARDOUS INDUSTRIAL Example: LEHL-170-U-50-CWS 1 2 3 4 5 6 1 SERIES 2 POWER 3 VOLTAGE 4 CCT 5 OPTICS / LENS 6 HOUSING LEHL 80: 80 Watts 110: 110 Watts 140: 140 Watts 170: 170 Watts U: 120-277V, 50/60Hz H: 347-480V, 50/60Hz 50: 5000K 120: 120 Clear Lens CWS: Ceiling/Wall/Stanchion* PSC: Pendant/Swivel/Clamp (3/4 NPT)** * CWS Housing Mount Options - Ordered Separately, Field Installed. Housing Item # CWS HLC: Ceiling Box HLW4: Wall Mount 40 8.9 14.0 14.2 HLW9: Wall Mount 90 HLS92: Stanchion 90 1-1/2" 9.8 HLS94: Stanchion 90 1-1/4" HLS22: Stanchion 25 1-1/2" 14.0 12.9 HLS24: Stanchion 25 1-1/4" 9.5 14.6 ** PSC Housing Mounting Accessories - Ordered Separately, Field Installed. Housing Item # PSC HLSW: Swivel/Clamp(Yoke) 16.5 3.9 3.9 9.5 15.7 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 19

INDUSTRIAL LEHL1 HAZARDOUS The LEHL1 is designed and listed for CI D2 hazardous, marine, and wet locations. This product is ideal for retrofitting High Pressure Sodium (HPS) and Metal Halide (MH) fixtures for increased energy savings and maintenance. Copper Free Aluminum Tempered Glass Powder Coat Gray Exposed fasteners are SS Light weight compact design APPLICATIONS Chemical Processing Industrial Oil / Gas CI D2, Grps A,B,C,D CII D1, Grps E,F,G CII D2, Grps F,G CIII Simultaneous Presence Shipyards / Marine Water Treatment UL 1598A Marine Outside UL 1598 Wet Locations NEMA 3 and NEMA 4X Example: LEHL1-L1-V1-4-V110-C-U 1 2 3 4 5 6 1 SERIES 2 SOURCE 3 VOLTAGE 4 CCT 5 OPTICS 6 LENS 7 MOUNT NOTE: LEHL1 L1: 45W,6750Lm V110: 110 C: Clear L2: 65W, 9750Lm TYPE V D: Diffused V1: 100-277VAC 3: 3000K 4: 4000K 5: 5000K P: Pendant 3/4, with Yoke Bracket* U: Universal ** 7 *Pendant mount comes with Yoke Bracket installed ** Must Order Ceiling / Pole / Wall mount separately and field install P: Pendant Mount 3/4 with Yoke Bracket U: Universal Mount Must Order Bracket Separately Ceiling and Wall Mount QTY 4 Ø.3 / 8 110 / 4.3 5.5 / 140 Ceiling Mount 7.4 in / 188 mm 4.3 / 110 5.5 / 140 Ø 10.3 in / 262 mm 1.96 / 50.9 /.24 Yoke 1.57 40 2.75 70.31 / 8.39 / 10 6.18 in / 157 mm 1.33 34 Pendant Mount Yoke Bracket 6.18 in / 157 mm Ø 10.3 in / 262 mm 6.1 in / 155mm 7 in / 178 mm Ø 10.3 in 262 mm Ø 10.3 in 262 mm Pole 25 1 1/4 1 1/2 13.34 in / 339 mm Wall 25 13.81 in / 351 mm 8.42 in / 214 mm 10.11 in / 257 mm Pole 90 1 1/4 1 1/2 Ø 10.3 in / 262 mm 13.22 in / 336 mm Wall 90 Ø 10.3 in / 262 mm 13.14 in / 334 mm 7.08 in / 180 mm 9.44 in / 240 mm 20 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Chemical Processing Industrial Oil / Gas LED hazardous duty area lighting fixtures are constructed and tested to function in adverse environments. Rely on LDPI to safely illuminate your work area even under the harshest conditions. Cast, copper-free aluminum Powder coat finish SS hardware Water Treatment CI D2, Grps A,B,C,D Zone 2, Grps IIC, IIB, IIA CII D1 and D2, Grps E,F,G CIII UL1598A For Marine Locations NEMA 4X UL844 CSA C22.2 No 137 H LED HAZARDOUS INDUSTRIAL Example: DL-0-10-E-UN-0-R5-C-P2 1 2 3 4 5 6 7 8 9 10 11 1 SERIES 2 LUMENS 3 DRIVER 4 VOLTAGE 5 HOUSING DL-0: H LED 05: 45W (5800Lm) 07: 58W (7100Lm) 10: 88W (10100Lm) E: Electronic LED Driver UN: Universal 120 to 277V, 50/60Hz (Voltage includes 208V, 220V, 240V etc.) 0: Standard Housing S: Standard Housing with stainless-steel insert 15: 122W (15600Lm) 17: 131W (17800Lm) 20: 166W (20400Lm) UN2: Universal 347/480V, 50/60Hz (Not available for DL017 and DL020) 6 OPTICS 7 GUARD 8 MOUNT TG: Thermal Shock-Resistant Glass Globe R1: Type I Glass Refractor Globe R3: Type III Glass Refractor Globe R5: Type V Glass Refractor Globe Blank: No Guard C: Cast Aluminum Guard L: Polymeric Guard 9 UNIPAK 10 SPECIAL OPTIONS 11 LIGHT DISTRIBUTION OPTIONS EU: USA Label T: HazCote Custom Anti-corrosion Coating (Consult factory) G: Grey color option I3: Interior Reflector 35 Beam Angle* I4: Interior Reflector 45 Beam Angle* I6: Interior Reflector 65 Beam Angle* (*): DL005, DL007, DL010 only A2: 3/4 Cone Top Pendant A3: 1 Cone Top Pendant B2: 3/4 Wall Mount B3: 1 Wall Mount C2: 3/4 Ceiling Mount C3: 1 Ceiling Mount L4: 1 1/4 Straight Stanchion L5: 1 1/2 Straight Stanchion S4: 1 1/4 25 Angle Stanchion S5: 1 1/2 25 Angle Stanchion 13 3 /8" 13 3 /8" 14 7 /8" 16 1 /8" 15 3 /4" 18 11 /32" 14 1 /2" 16 3 /4" 15 3 /16" 15 3 /16" CONE PENDANT CEILING PENDANT WALL MOUNT 25 STANCHION MOUNT STRAIGHT STANCHION LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 21

INDUSTRIAL LE551 EXPLOSION PROOF The LE551 Series is a line of LED luminaries. The LE551 is made of a combination of cast aluminum and 5052-H23 aluminum. It is an explosion proof LED light fixture intended for use in hazardous location settings. Suitable for locations having deposits of readily combustible paint residues. It is available with different row options including 2, 3 and 4 rows and lengths. Depending on the configuration these luminaries can be surface mounted or hung. Cast Aluminum Factory sealed, cast aluminum, one piece painted aluminum reflector Borosilicate Glass Tube Lens CI D1 Grps C,D CI D2 Grps A,B,C,D CII D1 Grps E,F,G ClII D2 Grps E,F,G CIII CI and ClII Simultaneous Presence APPLICATIONS Paint Spray Booths Marine/Outdoor Chemical Plants Drill Rigs Refineries Coal Storage Zone 1, Grp IIA and IIB UL844 CSA 22.2 No. 137.0 UL1598 Wet / Damp & Paint Spray CSA 22.2 No. 250.0 CSA 22.2 No. 250.13 40 C Ambient Rating Example: LE551-L3-V1-4-C-V-P 1 2 3 4 5 6 7 1 SERIES 2 SOURCE* 3 VOLTAGE 4 CCT 5 OPTIC 6 SHROUD 7 OPTIONS LE551 L1: 24W (2474Lm) 2 Ft. 2 Row L2: 34W (3498Lm) 2 Ft. 2 Row L3: 43W (5066Lm) 4 Ft. 2 Row L4: 64W (7164Lm) 4 Ft. 2 Row L5: 73W (8392Lm) 4 Ft. 3 Row L6: 86W (9873Lm) 4 Ft. 3 Row L7: 87W (10132Lm) 4 Ft. 4 Row L8: 128W (14328Lm) 4 Ft. 4 Row *Nominal Lumens V1: 120-277VAC, 50/60 Hz V2: 277-480VAC, 50/60 Hz 4: 4000K 5: 5000K BLANK: None D: Diffused Poly V: Vented E: Enclosed P: Polycarbonate Shield 1 WG: Stainless Steel Guard EM: Battery/Driver Backup (90min.) (L1 only) UL924 (L3 & L4 only) D1: Dimming (0-10V) D2: Dimming (DALI) PB: Powder Coat Black PW: Powder Coat White PG: Powder Coat Gray Note: If an option is not desired, leave the field blank. 1 Not available with (V) Vented Shroud Standard product will be PB Black with red accent PW & PG will be one color, no accents. If no color is specified, fixture will be bare aluminum. 4 Ft. Mounting Options Ordered Separately Item # Description Wall/Ceiling Kit 4401 For 2 or 3 Row 2 Ft. Wall/Ceiling Kit 4400 For 4 Row Must be factory installed Drop Mount Kit 4405 2 or 3 Row 4403 4 Row 2 or 3 Row 4 Row 22 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

ADDITIONAL LE551 EXPLOSION PROOF Fixture Class I, D1 Groups C & D Operating Temperature codes Based on 40 C Ambient Class I, D2 Groups A, B, C & D Class II, D1 Groups E, F & G Class II, D2 Groups E, F & G Class III Class I and II Simultaneous Presence LE551 T6=85 C T6=85 C T4=135 C T4=135 C T4=135 C T4=135 C INDUSTRIAL 2 Row 8.0" (203.2mm) 90 HUB (TYP.) 3 Row 13.4" (340.4mm) 4 Row 17.4" (442.0mm) 48.88" (1241.6mm) 53.63" (1362.2mm) 7.25" (184.15mm) 45 HUB (TYP.) Fixture Weight Shipping Weight 2 Row 40 Lbs. 43 Lbs. 3 Row 45 Lbs. 52 Lbs. 4 Row 80 Lbs. 84 Lbs. Options Factory Item # Description 4466 2 Row 2 Ft. WG: Stainless Steel Guards 4211 2 Row 4 Ft. Not for use in paint spray applications 4557 3 Row 4 Ft. 4211, (2) required 4 Row 4 Ft. 4464 2 Row 2 Ft. P: Polycarbonate Shields 4209 2 Row 4 Ft. (+/- 1/16 thickness) 4497 3 Row 4 Ft. 4209, (2) required 4 Row 4 Ft. All Mounting Options and Accessories are Ordered Separately LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 23

INDUSTRIAL 380 LED EXPLOSION PROOF The 380 LED Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the fixture at more desirable angles. Center ballast placement provides a more balanced fixture for ease of installation and weight distribution. The 380 LED Series is available in 4 length for 2, 3, & 4 lamp combinations. LED lamps included. Factory sealed, cast aluminum, one piece aluminum reflector Borosilicate Glass Tube Lens CI D1 Grps C,D CI D2 Grps A,B,C,D CII D1 Grps E,F,G CII D2 Grps E,F,G CIII CI/CII Simultaneous Presence Zone 1, Grp IIA, IIB UL844 CSA 22.2 No. 137.0 UL1598A Marine Outside APPLICATIONS Chemical / Oil / Gas Grain Processing Metals & Mining Water Treatment UL1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 UL8750 CSA 22.2 No. 250.13 NEMA 3, 4X, 7CD, 9EFG NFPA 33 NEC Article 516 40 C Ambient Rating Example: 380-LEDS5-4L-4-UNV1-P 1 2 3 4 5 6 7 1 SERIES 2 SOURCE 3 CCT 4 LAMP QTY 380 LED S: Standard Ballast Factor 4: 4000K 5: 5000K 5 LENGTH 6 VOLTAGE 7 OPTIONS 4: 4 Ft. 347: 347V UNV1: 120-277V P: Polycarbonate Shield WG: Stainless Steel Guard 2L: 2 Lamps 3L: 3 Lamps 4L: 4 Lamps Fixture Class I, D1 Groups C & D Class I, D2 Groups A, B, C & D Operating Temperature codes Based on 40 C Ambient Class II, D1 Groups E, F & G Class II, D2 Groups E, F & G Class III Class I and II Simultaneous Presence 380 LED T6=85 C T6=85 C T4=135 C T4=135 C T4=135 C T4=135 C 24 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

380 LED EXPLOSION PROOF ADDITIONAL 2 Lamp 48 7/8 45 HUB STD HUB 45 HUB 7 1/4 9 Fixture Weight Shipping Weight 2 Lamp 40 Lbs. 43 Lbs. 3 Lamp 45 Lbs. 52 Lbs. INDUSTRIAL 4 Lamp 80 Lbs. 84 Lbs. 7 1/4 90 HUB 53 5/8 Mounting Options Ordered Separately Item # Description 3 Lamp Wall/Ceiling Kit 4401 For 2 or 3 Lamp 7 1/4 45 HUB STD HUB 13 45 HUB 48 7/8 Wall/Ceiling Kit 4400 For 4 Lamp (Must be factory installed) 4 Lamp 45 HUB 7 1/4 Drop Mount Kit 4405 2 or 3 Lamp STD HUB 18 3/4 4403 4 Lamp 48 7/8 45 HUB Options Item # Description WG: Stainless Steel Guards (Not for use in paint spray applications) P: Polycarbonate Shields (+/- 1/16 thickness) 4211 2 Lamp 4 Ft. 4557 3 Lamp 4 Ft. 4211, (2) required 4 Lamp 4 Ft. 4209 2 Lamp 4 Ft. 4497 3 Lamp 4 Ft. 4209, (2) required 4 Lamp 4 Ft. LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 25

INDUSTRIAL LEXF EXPLOSION PROOF The LEXF is designed and listed for CI D1 explosion, hazardous, marine, and wet locations. This product is ideal for retrofitting High Pressure Sodium (HPS and Metal Halide (MH) fixtures for increased energy savings and maintenance. Copper Free Aluminum Tempered Glass Lens Powder Coat Black All exposed fasteners are SS APPLICATIONS Chemical Processing Grain Processing Metals & Mining CI D1, Grps C,D CI D2, Grps A,B,C,D CII D2, Grps F,G CIII UL 1598A Marine Outside Oil / Gas Water Treatment UL 1598 Wet Locations NEMA 3 and NEMA 4X -40 F to 140 F Ambient Rating IP66 Example: LEXF-L1-V1-4-V60-C 1 2 3 4 5 6 1 SERIES 2 SOURCE 3 VOLTAGE 4 CCT 5 OPTICS 6 LENS Note: Product comes standard with: LEXF L1: 80W, 10400Lm V1: 100-277VAC 3: 3000K V25: 25 TYPE V C: Clear (3) 3/4 NPT Hubs: pendant and two sides L2: 100W,13300Lm V2: 347-480VAC 4: 4000K V60: 60 TYPE V D: Diffused hubs, and a yoke bracket pre-installed. L3: 150W,19500Lm 5: 5000K V120: 120 TYPE V 10Kv Surge Protector built in 3 SJTOW-18/3 Wire Whip (factory installed) MOUNTING ACCESSORIES - Field Installed Order Separately Part Number Description LEXF-WG01 Wire Guard Stainless Steel 304 Pole Ceiling Flood Pendant LEXF-SN01 Slipfitter Mount Bracket Fits 2 3/8 Outside Diameter Pole 7.87 in / 200 mm 5.51 in / 140 mm R.21 in / 5.5mm 10.66 in / 271 mm 8.42 in / 214 mm 3.14 in 80 mm 2.2 in / 56 mm 13.46 in / 342 mm 6.92 in / 176 mm 9.4 in / 239 mm 13.46 in / 342 mm 26 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint Booths (Outside behind glass panel) Assembly Areas Fabricated with a white powder coat finish the 229H Series is ideal for a variety of industrial lighting needs. A unique hinged ballast cover provides easy access to internal wiring and ballast for installation or service without the need to remove lamps. The 229H uses a 5 Ft. 3-wire whip which reduces installation time by not having to open the fixture. Available in T8, T8HO, or T5HO lamps. Lamps not included. Heavy duty Open industrial fixture Hinged ballast plate allows for the fixture to be lamped prior to installation Sturdy 20 gauge steel with a white powder coat finish Task Lighting UL 1598 CSA 22.2 No. 250.0 229H ORDINARY LOCATION INDUSTRIAL Example: 229H-T5HO-4L-120-277-WG 1 2 3 4 5 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 VOLTAGE 5 OPTIONS 229H T5HO: 54W T8: 32W* T8HO: 44W 4L: 4 lamp 3L: 3 lamp 2L: 2 lamp 120-277: 120-277V 347-480: 347-480V (T5HO ONLY) WG: Zinc plated wire guard** A: Pattern 12 acrylic diffuser*** EM: Battery/Driver Backup (90 Min.) **Must be installed at the factory ***Diffuser is only available in 32W T8 NOTES: (Multiple voltages available, consult factory) *Normally stocked fixture (Consult factory for lead time on non-stock products.) 14 1/2 48 1/4 nominal WG: Zinc plated wire guard option 4 Optional Mounting - Ordered Separately PN: 3218 Chain hang kit 24 Chain piece (Qty. 2) Chain hanger bracket (Qty. 2) Ballast plate is hinged for easy access Wire whip not shown 229H Light fixture LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 27

INDUSTRIAL 376 WET / DAMP Suitable for interior or exterior applications. A lightweight, vapor tight, nonmetallic fixture ideal for corrosive or wet/damp environments. The 376 fixture features a fiberglass housing with an acrylic or polycarbonate lens, a continuous gasket design, along with an optional aluminum reflector available upon request. The 376 is ideal for commercial industrial or institutional applications providing maximum light output where humidity, dust, or fumes are possible. The 376 is resilient against corrosion and weathering. Lamps not included. Fiberglass: 5VA UL rated Available lengths: 2, 4 and 8 White polished fiberglass. Gear tray: white enamel APPLICATIONS Food & Beverage Processing Industrial UL 1598A Marine Inside UL 1598 Wet / Damp CSA 22.2 No. 250.0 NSF: Splash Zone Non-Food Prep NEMA 4X IP65-2ft and IP67-4 & 8ft IP55 ALL Pulp & Paper Shipyards / Marine Water Treatment Example: 376-T8-3L-4-UNV1-A-EM 1 2 3 4 5 6 7 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 LENGTH 5 VOLTAGE 376 T5: 14W, 28W* T5HO: 24W, 54W T8: 17W, 32W, 59W* T8HO: 86W* (8 fixture only) 1L: 1 Lamp (4 only) 2L: 2 Lamp 3L: 3 Lamp (T5 and T8 only) 4L: 4 Lamp (8 only) 6L: 6 Lamp (8 T5 and T8 only) 2: 2 Ft. 4: 4 Ft. 8: 8 Ft. 6 LENS 7 OPTIONS PR: Polycarbonate Ribbed Lens (2 and 4 only) A: Acrylic Ribbed Lens (4 2 or 3 Lamp and 8 only) AC: Acrylic Optically Clear Lens (4 2 or 3 lamp and 8 only) FA: Frosted Acrylic Lens (4 2 or 3 lamp and 8 only) (Not NSF listed) UNV: 120-277W 50/60Hz 120: 120V 277: 277V 347: 347V SL: Stainless Steel Latches HB: Enhanced Alum. Refl. 0.30 => 93% reflective EM: Battery/Driver Backup (90 Min.) WD: Wide distribution enhanced aluminum reflector (Used with AC lens ONLY) (4 2 lamp fixture, 8 fixture with (2) 8 lamps or 8 fixture with (4) 4 lamps only) Notes: * IP 65 for MAX (2) 32 W lamps 4 Ft. housing and (4) 32 W lamps 8 Ft. Housing. IP 55 for all models 2 Ft., 4 Ft., and 8 Ft IP 67 for all 4 Ft. 2 lamp fixtures LDPI, Inc. stocks multiple configurations. Consult factory. For chemical resistance information please see website. 45 Mounting bracket kit (8 fixture requires 2 kits) P/N 5151: 1 lamp housing P/N 5102: 2 or 3 lamp housing Optional Mounting Ordered Separately Chain hung Mounting bracket bail kit (8 fixture requires 2 kits) P/N 5192: Narrow housing P/N 5193: Standard housing Mounting brackets provide impressive benefits. Offers a huge advantage over more traditional enclosures. Durable, stainless steel Mounting hardware. No drilling necessary for the housing for installation. Installation time is dramatically reduced, providing lower installation costs. STANDARD Mounting BRACKET Kits Included with each fixture P/N 6685: 1 lamp housing P/N 6686: 2 or 3 lamp housing Two brackets per kit. 1 kit needed per fixture. Mounting bracket for narrow and standard lamp housing. OPTIONAL Mounting 45 Mounting bracket kit (8' fixture requires 2 kits) P/N 5151: 1 lamp housing Kit includes: (2) 45 brackets and (2) 5080 brackets P/N 5102: 2 or 3 lamp housing Kit includes: (2) 45 brackets (2) 5081 brackets Chain hung Mounting bracket bail kit (8' fixture requires 2 kits) P/N 5192: Narrow housing P/N 5193: Standard housing Kit includes: (2) S-hooks (2) 2 lengths of chain (2) 5150 chain hang looms (2) 5080 brackets (narrow housing only) (2) 5081 brackets (standard housing only) 3 9/32 45 45 Mounting option Chain hung Mounting option 28 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Industrial/Machining Areas Tunnels The 240 8 Ft. Series is a very versatile fixture that is ETL listed for ordinary locations. It is an ideal fixture for industrial applications, wet locations and task lighting. Optional adjustable Mounting brackets allow for precise aiming in multiple angles suitable for most applications. The 240 8 Ft. Series is available in 2, 3, 4, 5, 6, 8, 10 and 12 lamp options, all using a 3/16 tempered glass lens with acrylic and polycarbonate optional lenses. With multiple hub locations, the 240 8 Ft. Series can meet most of your wiring needs. Lamps not included. Front access fixture Hinged front door frame Hinged ballast tray 18 Ga. steel white powder coated Spring loaded lamp holders 3/16 tempered glass lens Zinc latches Pulp/Paper Food/Beverage Prep, Inspection, Sanding UL 1598 Wet / Damp CSA 22.2 No. 250.0 240 8 Ft. WET / DAMP INDUSTRIAL Example: 240-T8-4L-8-UNV1-TS-AM 1 2 3 4 5 6 7 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 LENGTH 5 VOLTAGE 6 HUB 240 T5: (4 ) 28W 2L: 2 Lamp 8: 8 Ft. UNV1: 120-277V TS: Top and Side Hubs T5HO: (4 ) 54W T8: (4 ) 32W, (8 ) 59W T8HO: (4 ) 44W, (8 ) 86W 3L: 3 Lamp 4L: 4 Lamp 5L: 5 Lamp 6L: 6 Lamp 8L: 8 Lamp** 10L: 10 Lamp** 12L: 12 Lamp** UNV2: 347-480V*** 347: 347V 7 OPTIONS AM: Adjustable Angle Mounting Brackets (PN: 9349) CB: Cable Mount (PN: 6875) Includes 5 ft. Cables Std. WH: 8 Wire Whip SR: Specular High Bay Reflector W: Wire Guard F: Fuse A: Acrylic Lens P: Polycarbonate Lens EM: Battery/Driver Backup (90 Min.) 8HLO: High Light Output Ballast (T8 32W Lamp Only) 8FTL: 8 Ft. Lamp**** NOTES: ** 4 lamps only *** UNV2 T5HO Only **** Fixture comes equipped with 4 Ft. lamps. Select 8FTL for optional 8 Ft. Lamps 1/2 NPT standard For horizontal or ceiling mounted fixture only 1/2 NPT HUBS 1/2 NPT HUBS INTEGRATED ACCESS DOOR HINGE A 101 3/8 103 5 1/8 HINGED REFLECTOR A 2 LAMP: 12 3/16" 3 & 4 LAMP: 16 3/16" 5 & 6 LAMP: 20 11/16" LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 29

INDUSTRIAL 384 MARINE Meets all Coast Guard specifications. Streamlined design provides eye appeal and ruggedness. Designed to withstand strong vibration. T4 (135 C) operating code. Adjustable mounting brackets and lamps included. Straight in lamp holders. ADJUSTABLE MOUNTING BRACKETS AND LAMPS INCLUDED. Corrosion resistant, low copper content aluminum Zinc plated latches are standard 3/4 hubs Neoprene gasket Easy access to fluorescent ballast and internal wiring APPLICATIONS Oil/Gas Pulp/Paper Shipyards/Marine UL 844 CSA 22.2 No. 137.0 UL 1598A Marine Outside UL 1598 Wet / Damp CSA 22.2 No. 250.0 CI D2 Groups A,B,C,D T4 135 C 40 C Ambient Rating Water Treatment Drill Rigs Offshore Platforms Example: 384-T5HO-2L-2-UNV1-EM 1 2 3 4 5 6 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 LENGTH 5 VOLTAGE 6 OPTIONS 384 T8: 17W or 32W T5HO: 54W or 24W 2L: 2 lamps 2: 2 Ft. 4: 4 Ft. UNV1: Universal 120-277V 120: 120V 277: 277V EM: Battery/Driver Backup (90 Min.) (4 fixture only) Notes: Adjustable Mounting brackets and lamps included. Multiple voltages available, consult factory. For chemical resistance information please see website. 384 Series Dimensions (Inches) (Nominal) LENGTH A B C D E 4 Ft. 51.6 50.0 6.3 6.5 8.7 2 Ft. 26.0 26.0 6.3 6.5 8.7 4.63" (117.6mm).38" (9.7mm) (2) PLCS 48.81" (1239.8mm) 3/4 NPT E C D B A 30 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Chemical Processing Industrial Oil / Gas The 240 Series is a very versatile fixture for hazardous environments. It is an ideal fixture for industrial applications, wet locations and task lighting. Optional adjustable mounting brackets allow for precise aiming in multiple angles suitable for most applications. The 240 Series is available in 2, 3, 4, 5 and 6 lamp options, all using a 3/16 tempered glass lens with acrylic and polycarbonate optional lenses. With multiple hub locations, the 240 Series can meet most of your wiring needs. LAMPS SOLD SEPARATELY. Front access Hinged front door frame Hinged ballast tray 18 Ga. steel white powder coat Spring loaded lamp holders 3/16 tempered glass lens Zinc latches Water Treatment UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D T rating see chart CII D2 Grps F,G T4A 120 C CIII T4A 120 C IP 65 40 C Ambient Rating 55 C Ambient Rating (T8-32 watt) 240 HAZARDOUS INDUSTRIAL Example: 240-T8-4L-UNV1-TS-AM 1 2 3 4 5 6 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 VOLTAGE 5 HUB 240 T5: 28W T5HO: 54W T8: 32W T8HO: 44W 2L: 2 Lamp 3L: 3 Lamp 4L: 4 Lamp 5L: 5 Lamp 6L: 6 Lamp UNV1: 120-277V UNV2: 347-480V*** 347: 347V TS: Top and Side Hubs** 6 OPTIONS AM: Adjustable Angle Mounting Brackets (PN: 6856) 6856SS: AM Stainless Steel CB: Cable Mount (PN: 6875) Includes 5 ft. cables std. 6875SS: CB Stainless Steel. Includes 5 ft. cables std. (Consult Factory for availability) WH: 8 3-Wire Whip SR: Specular High Bay Reflector W: Wire Guard F: Fuse A: Acrylic Lens P: Polycarbonate Lens 7979: Chain Mount Kit EM: Battery/Driver Backup (90 Min.) (Ambient reduced to 40 C) 8HLO: High Light Output Ballast (T8 32W lamp only) 10357: Vertical Mounting Bracket NOTES: ** 1/2 NPT standard *** UNV2 T5HO Only For horizontal or ceiling mounted fixture only EM available as UNV1 (120-277) only (ULus only) 1/2 NPT HUBS 1/2 NPT BOTH ENDS INTEGRATED ACCESS DOOR HINGE HINGED REFLECTOR BRACKETS FOR OPTIONAL MOUNTING KITS A 51 1/2" ROTARY DRAW 53 1/8" LATCHES HINGED DOOR FRAME 5 5/16 A: 2 LAMP: 12 3/16" 3 & 4 LAMP: 16 3/16" 5 & 6 LAMP: 20 11/16" Adjustable Mounting Brackets for Surface Mounting LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 31

INDUSTRIAL 440 2X4 HAZARDOUS The 440 2x4 Series is a slim 4 1/4 product that is suited for use in clean room applications where a lay-in, recessed or surface mount troffer application is desired. This series comes in a 4 lamp configuration of T8 32W lamps, and utilizes a specular polished reflector system for increased light output. Lay-in fixture fits 2x4 grids with up to a 2 industrial T-grid suspension system. LAMPS SOLD SEPARATELY. 20 gauge enclosed, sealed and gasketed steel construction with post painted white powder coat finish. Front access troffer style: Standard Lay-in fixture fits 2x4 grids with up to a 2 industrial T-grid suspension system APPLICATIONS Industrial Oil / Gas Drilling Rigs UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D T3C 160 C CII D2 Grps F,G T3C 160 C 40 C Ambient Rating Clean Rooms Prep, Inspection, Sanding Areas Example: 3904402X4-T-L-PC-C-3546 1 2 3 4 5 6 1 SERIES 2 LAMP TYPE 3 MOUNT 4 HOUSING 3904402X4 T: T8 32W L: Lay-in* R: Recessed Flange/Box Panel (for use with kits 8363 and 3332) S: Surface Mount (for use with kit 8362) 5 HUB 6 BALLAST A, B, C or D See Hub Locations 3546: T8 120-277V, 50/60Hz PP: PrePaint PC: Powder Coat (Standard) AS: Aluminized Steel GS: Galvanized Steel NOTES: * Lay-in Mount is standard, other mounting options ordered separately. Hub Locations A, B, C, and D will clear for Lay-in Mount A B C (Back of Fixture) D Lay-In Mount Standard Independent support bracket shown. Lay-in mount option only. Surface Mount Kit P/N 8362 3 15/16" 3 15/16" 23 1/2" 47 3/4" 4 1/4" 15" 23 1/2" 4 1/4" 47 3/4" 51 1/2" 49 1/2" Recessed Flange Mount: P/N 8363 3 1/4" 2 1/4" Box Panel Mount P/N 3332 15" 51 1/2" 15" 15" 23 1/2" 3 15/16" 1 1/8" TYP 15" 3 15/16" 1 3/8" 3 1/4" 2 1/4" 4 1/4" 5 1/4" 25 1/2" 15" 23 1/2" 5 1/4" 4 1/4" 47 3/4" 49 1/2" 4 1/4" 15" 23 1/2" 4 1/4" 15" 1 3/8" 15" 47 3/4" 32 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Industrial Paint and Powder Booths The Series 440T / 440THO is a slim 2 1/4 product that is suited to being used in paint spray booths (with recessed flange mount option) & clean room applications where a lay-in troffer application is desired. This series comes in 4 lamp configurations of either T5 28W or T5HO 54W lamp options. Both utilize a specular insert for increased light output. Lamps not included. LAMPS SOLD SEPARATELY. 20 gauge enclosed Sealed and gasketed White powder coated finish Front access troffer style Highly reflective white finish Specular insert Blast Booths Prep, Inspection Sanding Areas UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D T3C 160 C CII D2 Grps F,G T3C 160 C 40 C Ambient Rating 440 T/THO HAZARDOUS INDUSTRIAL Example: 390440T-L-PC-C-4425 1 2 3 4 5 1 SERIES 2 MOUNT 3 HOUSING 390440T: T5 28W 390440THO: T5HO 54W 4 HUB 5 BALLAST A, B, C or D See Hub Locations L: Lay-in* R: Recessed Flange/Box Panel (for use with kits 3331 and 3332) S: Surface Mount (for use with kit 3330) PP: PrePaint PC: Powder Coat (Std) AS: Aluminized Steel GS: Galvanized Steel NOTES: 4425: T5 120-277V * Lay-in Mount is standard. 3265: T5HO 120-277V Other Mounting options ordered separately 5420: T5HO 347-480V A HUB LOCATIONS A, B, and D not recommended for Lay-in Mount C: not for use with surface mount. B C (Back of Fixture D Lay-In Mount Standard Independent support bracket shown. Lay-in mount option only. 2 1/4 Surface Mount P/N 3330 2 1/4 23 1/2 47 1/2 4 1/4 15 23 1/2 4 1/4 47 1/2 49 1/2 51 1/2 Recessed Flange Mount: P/N 3331 15 15 Box Panel Mount P/N 3332 15 2 1/4 2 1/4 1 1/4 4 1/4 4 1/4 27 1/2 15 23 1/2 47 1/2 49 1/2 51 1/2 4 1/4 23 1/2 15 15 15 47 1/2 15 4 1/4 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 33

INDUSTRIAL 380 EXPLOSION PROOF The 380 Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the fixture at more desirable angles. Center ballast placement provides a more balanced fixture for ease of installation and weight distribution. The 380 Series is available in 2 & 4 lengths for 2, 3, & 4 lamp combinations in T5, T5HO, T8, T8HO. Lamps included. Factory sealed, cast aluminum Ballast mounted in the center (5) 1/2 NPT Hubs One piece aluminum reflector.189 wall Borosilicate tubes UL 844 CSA 22.2 No. 137.0 UL 1598A Marine Outside UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CI D1 Grps C,D T6 85 C CI D2 Grps A,B,C,D T4 135 C APPLICATIONS Chemical Processing Grain Processing Metals & Mining Oil / Gas Water Treatment CII D1 Grps E,F,G T4 135 C CII D2 Grps E,F,G T4A 135 C CIII T4A 135 C CI and CII simultaneous presence T4 135 C Zone 1, Group IIA, IIB NEMA 3, 4X, 7CD, 9EFG NFPA 33, and NEC Article 516 Example: 380-T8-3L-4-UNV-EM 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 LENGTH 5 VOLTAGE 6 OPTIONS 380 T5** T5HO* T8* T8HO** 1 2 3 4 5 6 2L: 2 Lamp 3L: 3 Lamp 4L: 4 Lamp 2: 2 Ft. UNV: Universal Voltage 4: 4 Ft. 120-277V, 50/60Hz 347: 347V EM: Battery/Driver Backup (90 Min.) (4 Ft. 2 lamp ONLY - UL Listed) HB: 93% Reflective specular reflector insert Notes: *5000K lamp standard for T5HO and T8 lamps **4100K lamp standard for T8HO and T5 lamps All T5, T5HO, T8, and T8HO are universal voltage **T8HO Lamp Type not available in 2 Ft. fixture. *347 Volt only available in T5HO and T8. 3 and 4 Lamp fixtures not available in 2 Ft. length. 3 lamp fixtures not available in T5 or T8HO Normally stocked. Consult factory for non-standard fixtures Lamp Wattages 2 Ft. Watts 4 Ft. Watts T5 14 T5 28 T5HO 24 T5HO 54 T8 17 T8 32 T8HO n/a T8HO 44 Operating Temperature Codes Based on 40 C Ambient Class I, Div. 1 Groups C and D T6 = 85 C Class I, Div. 2 Groups A, B, C, D T4 = 135 C Class II, Div. 1 Groups E, F, G T4 = 135 C Class III T4 = 135 C Simultaneous Presence Class I and II T4 = 135 C Mounting Options Item # Description Wall/Ceiling Kit 4401 For 2 or 3 Lamp All Mounting Options and Accessories are Ordered Separately Accessories Item # Description Wall/Ceiling Kit 4400 For 4 Lamp (Must be factory installed) WG: Stainless Steel Guards (Not for use in paint spray applications) 4466 2 Lamp 2 Ft. 4211 2 Lamp 4 Ft. 4557 3 Lamp 4 Ft. 4211, (2) required 4 Lamp 4 Ft. Drop Mount Kit 4405 2 or 3 Lamp 4403 4 Lamp P: Polycarbonate Shields (+/- 1/16 thickness) 4464 2 Lamp 2 Ft. 4209 2 Lamp 4 Ft. 4497 3 Lamp 4 Ft. 4209, (2) required 4 Lamp 4 Ft. 34 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

ADDITIONAL 380 EXPLOSION PROOF DIMENSIONS (Nominal) 2L 2FT. Dimensions 45 HUB STD HUB 7 1/4 9 90 HUB INDUSTRIAL 24 7/8 45 HUB 29 5/8 45 HUB 7 1/4 STD HUB 9 90 HUB 48 7/8 45 HUB 53 5/8 7 1/4 45 HUB STD HUB 45 HUB 13 90 HUB 48 7/8 53 5/8 4L 4FT. Dimensions 45 HUB 7 1/4 STD HUB 18 3/4 90 HUB 48 7/8 45 HUB 7 1/4 7 1/4 7 1/4 7 1/4 2L 4FT. Dimensions 3L 4FT. Dimensions 53 5/8 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 35

NOTES

BOOTH LIGHTING

BOOTH LIGHTING SERIES Class I D1 Class I D2 Class II Class III Corrosion Resistant Paint Spray Marine Wet Damp General Industrial Page # LE151 39 LE155 40 LE481 41 LE482 42 Slim Light LED 43 400 LED 44 LE551 45 380 LED 47 229H 49 400 50 400SLB 51 Slim Light 52 380 53 Accessories 55 Marine: = Outside Salt Water (UL 1598A) We use our best effort to make our catalog accurate. We reserve the right to correct typographical errors and omissions. Specifications may be changed subsequent to printing. LED LIGHTING FLUORESCENT

APPLICATIONS Paint and Powder Booths (Outside behind glass) Commercial The LED, LE151 Series fixture was specifically designed to provide directional light for paint and powder booths. This Ordinary Location fixture was designed with special LED modules that allow you to aim the LEDs to get the light where it is needed vs. lighting the entire room and places of no value. This fixture is available in 2, 3, 4, 5 or 6 fixture lengths and is to be installed outside the hazardous area behind glass panels. 20 gauge powder coated white finish Institutional Facilities Industrial UL 1598 CSA 22.2 No. 250.0 40 C Ambient Rating LE151 ORDINARY LOCATION BOOTH Example: LE151-4-4-136-5-V1-C 1 2 3 4 5 6 7 1 SERIES 2 LENGTH 3 ROWS 4 LUMENS* 5 CCT 6 VOLTAGE 7 SUPPLY LE151 2: 2 Ft. 3: 3 Ft. 4: 4 Ft. 2: 2 rows 3: 3 rows 4: 4 rows SEE CHART 3: 3500K 4: 4000K 5: 5000K V1: 120-277V C: 6 Ft. Blunt End Cord CP1: 6 Ft. Cord w/120v Twist Lock Plug CP2: 6 Ft. Cord w/277v Twist Lock Plug 5: 5 Ft. 6: 6 Ft. NOTES *Value is lumens/100; dependent on driver/module combinations defined by Length of Fixture and Number of Rows. Nominal values are shown in Matrix below. See lumen chart for available configurations. Example: LE151-4-4-136-5-V1-C 4 Ft., 4 Row, 13600 Lumens at 5000K Dimensions 2 Rows 3 Rows 4 Rows A 25 33 1/2 42 Length 2 Ft. 3 Ft. 4 Ft. 5 Ft. # MTG Brackets 4 6 Ft. 6 Dimensions B 25 7/8 C 15 B 36 7/8 C 26 B 47 7/8 C 37 B 58 7/8 C 48 B 69 7/8 C 59 D 29 1/2 1 5/16" 3 15/16" 2 Rows 3 Rows 4 Rows 1 3/16" SLOT Ø 3/8" x 1" 2 PLACES E: Mounting Bracket Lumen Chart Light Output of Fixture at 5000K CCT 2 Ft. 3 Ft. 4 Ft. 5 Ft. 6 Ft. Lumens 3400 5100 6800 8500 10200 Watts 36 55 73 91 109 Lumens 5100 7600 10200 12700 15300 Watts 55 82 109 137 164 Lumens 6800 10200 13600 17000 20400 Watts 73 109 146 182 219 A D C B D LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 39

BOOTH LE155 ORDINARY LOCATION The LE155 is designed and listed for ordinary locations. This product is ideal for task, overhead, and paint booth (behind the glass) applications. Compact design with amiable LED s illuminate allows focusing the light on the task. 20 Gauge Steel and Aluminum Housing Powder Coat Black Finish Polycarbonate Lens Clear or Diffused impact resistant lens UL1598 CSA 22.2 No. 250.0 UL8750 APPLICATIONS Industrial Task Commercial & Institutional Facilities Example: LE155-S-4-V1-4-2-AS-D-C 1 2 3 4 5 6 7 8 9 1 SERIES 2 POWER 3 CCT 4 VOLTAGE 5 LENGTH LE155 S: 58W H: 73W 3: 3000K 4: 4000K 5: 5000K V1: 100-277VAC 4: 4Ft 8: 8Ft 6 ROWS 7 MOUNT 8 LENS 9 OPTIONS 1: 1 Row 2: 2 Row 3: 3 Row 4: 4 Row AS: Surface Mount HY: Hanging Mount UM: Universal - No Frame Blank: None D: Diffused C: Cord - 5.5 Ft. 16/3 SOOW 600V 90 C.380 OD Blunt End CP1: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V NEMA L5-15P CP2: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V Plug: NEMA L7-15P (277 Volt, 15 Amp, Twist Lock) CP3: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V NEMA 5-15P CP4: Cord 6 Ft. 16/3 SOOW (.38 Dia) Rated 105C 600V NEMA 7-15P D1: Dimming (0-10V) D2: Dimming (Dali) EM: Battery/Driver Backup (90Min.) UL924 SP: 10Kv Surge Protector AS: Surface Mount The Surface Mount option utilizes mounting tabs that can be surface mounted to the structure in any configuration. Surface Mount Tabs allow for fixture to be mounted on Uni-strut type or other square tube structure HY: Hanging Mount The Hanging Mount option utilizes a frame that can house up to 4 light bar modules. Utilizing an easy mount system, the mounting adapter is attached to the structure and the frame has tabs that allow the fixture to be easily hung on the adapters for quick installation. Each individual Light Bar Module can be easily positioned or aimed at the work surface for optimal illumination. UM: Universal - No Frame Features a remote driver box that will house the driver(s), with a low voltage cable run to each Light Bar Module. Individual Light Bar Modules are available in 4 Ft. or 8 Ft. lengths and are adjustable to aim the light on the task. Light Bar Modules are easily surface mounted to any flat surface or structure and can be up to 200 Ft. away from the Remote Driver enclosure. This flexibility allows for multiple light bar configurations to illuminate any application. 40 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint and Powder Booths Blast Booths Clean Room Prep Sanding The LE481 Series is a hinged, front access, recessed mount, LED paint booth luminaire. The LE481 is made of a combination of 20 gauge cold rolled steel and.090 aluminum. This LED fixture is available in 4 Ft. lengths with 1, 2, or 3 rows of LED s; replacing your standard 2, 4, and 6 lamp fluorescent fixture. This fixture can be used with or without optics, has dimming capabilities, and is available with an EM option. 20 Gauge Steel Powder Coated White Hinged, Inside (Front) Access 4 Ft. Length Clear Tempered Glass Lens 5 wire Whip (8 ) Standard CI D2 Grps A,B,C,D CII D2 Grps F,G UL844/1598 Wet/Damp & Paint Spray 55 C Ambient Rating LE481 HAZARDOUS - BOOTH - FRONT ACCESS BOOTH Example: LE481-58-V1-A-D1-4-EM 1 2 3 4 5 6 7 1 SERIES 2 POWER 3 VOLTAGE 4 OPTIC 5 DIMMING 6 CCT 7 ADD-ON OPTIONS LE481 58: 58W (6985Lm) 1 Row 73: 73W (8700Lm) 1 Row 115: 115W (13970Lm) 2 Rows 145: 145W (17400Lm) 2 Rows 172: 172W (20955Lm) 3 Rows 218: 218W (26100Lm) 3 Rows V1: 120-277VAC, 50/60Hz Blank: None A: Diffused Acrylic Blank: None D1: 0-10V 3: 3500K 4: 4000K 5: 5000K SP: Surge Protector EM: Battery/Driver Backup (90 Min.) Type 4 Ft. 1 Row 4 Ft. 2 Rows 4 Ft. 3 Rows Model Input Voltage (VAC) Input Current (A) Wattage (W) Blank: None Nominal Lumen Output @ 5000K* OPTIC A: Diffused Acrylic Nominal Lumen Output at 5000K* LE481-58 0.49-0.22 58 6985 5640 LE481-73 0.61-0.28 73 8700 7025 LE481-115 0.97-0.44 115 13970 11280 120-277V LE481-145 1.22-0.55 145 17400 14050 LE481-172 1.45-0.65 172 20955 16920 LE481-218 1.84-0.83 218 26100 21075 * Lumen values shown are nominal. 50 1/4 1 1/8 16 16 16 1 7/8 C 5/16 TYP HOLE DETAIL (4 FT. FIXTURES) 1/2 TYP 5/16 DIA. 12 Holes D 50 7/8 1 7/8 2 1/4" B A HUB 2 - DIMMING LEADS HUB 1 - POWER LEADS 51 7/8" 50" Type Model A B C D 4 Ft. LE481-58 1 Row LE481-73 9 1/2" 13" 10 3/4" 7" 4 Ft. LE481-115 2 Rows LE481-145 14 1/2" 18" 15 3/4" 12" *Hub 2 with Dimming option only Consult factory for other hub locations 4 Ft. 3 Rows LE481-172 LE481-218 19 1.2" 23" 20 3/4" 17" LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 41

BOOTH LE482 HAZARDOUS - BOOTH - REAR ACCESS The LE482 Series is a hinged, REAR ACCESS, recessed mount, LED paint booth luminaire. The LE482 is made of a combination of 20 gauge cold rolled steel and.090 aluminum. This LED fixture is available in 4 Ft. lengths with 1, 2, or 3 rows of LEDs; replacing your standard 2, 4, and 6 lamp fluorescent fixture. This fixture can be used with or without optics, has dimming capabilities, and is available with an EM option. 20 Gauge Steel Powder Coated White Housing Hinged, Rear Access Panel 4 Ft. Length Clear Tempered Glass Lens 3 wire Whip (8 ) Standard CI D2 Grps A,B,C,D CII D2 Grps F,G UL844/1598 Wet/Damp & Paint Spray 55 C Ambient Rating APPLICATIONS Paint and Powder Booths Blast Booths Clean Room Prep Sanding Example: LE482-58-V1-A-D1-4-SP 1 2 3 4 5 6 7 1 SERIES 2 POWER 3 VOLTAGE 4 OPTIC 5 DIMMING 6 CCT 7 ADD-ON OPTIONS LE482 58: 58W (6985Lm) 1 Row 73: 73W (8700Lm) 1 Row 115: 115W (13970Lm) 2 Rows 145: 145W (17400Lm) 2 Rows 172: 172W (20955Lm) 3 Rows 218: 218W (26100Lm) 3 Rows V1: 120-277VAC, 50/60Hz Blank: None A: Diffused Acrylic Blank: None D1: 0-10Volt 3: 3500K 4: 4000K 5: 5000K SP: Surge Protector EM: Battery/Driver Backup (90 Min.) PG: Prismatic Glass Type 4 Ft. 1 Row 4 Ft. 2 Rows 4 Ft. 3 Rows Model Input Voltage (VAC) Input Current (A) Wattage (W) Blank: None Nominal Lumen Output @ 5000K* OPTIC A: Diffused Acrylic Nominal Lumen Output at 5000K* LE482-58 0.49-0.22 58 6985 5640 LE482-73 0.61-0.28 73 8700 7025 LE482-115 0.97-0.44 115 13970 11280 120-277V LE482-145 1.22-0.55 145 17400 14050 LE482-172 1.45-0.65 172 20955 16920 LE482-218 1.84-0.83 218 26100 21075 * Lumen values shown are nominal. 50 1/4 50" 3 1/2" 1 1/8 16 16 16 1 7/8 52 3/8" C HOLE DETAIL (4 FT. FIXTURES) 5/16 TYP 1/2 TYP 5/16 DIA. 12 Holes D 50 7/8 1 7/8 A B HUBS LOCATED HERE Note: Secondary hub for dimming option only. Consult factory for other hub locations Type Model A B C D 4 Ft. LE482-58 10 1/2" 12 1/2" 10 3/4" 7" 1 Row LE482-73 HUB LOCATIONS 23 7/8 23 7/8 SECONDARY HUB (D1 DIMMING OPTION) PRIMARY HUB (LINE VOLTAGE) 2 4 Ft. 2 Rows 4 Ft. 3 Rows LE482-115 LE482-145 LE482-172 LE482-218 15 1/2" 17 1/2" 15 3/4" 12" 20 1/2" 22 1/2" 20 3/4" 17" 42 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint and Powder Booths Blast Booths The Slim Light LED Series features a 20 Ga. white powder coat steel housing that is only 2 ¼ thick. The Slim LED Series is available as a 4 fixture with 2, 4 and 6 LED lamp options, it can be built with low and standard ballast factor ballasts and is available with 5000K LEDs. This series provides a hinged front door lens assembly with a paint spray cutoff switch when opened. This fixture must be installed with the hinge side up when being horizontally mounted. LED lamps and 8 Ft. wire whip included. 20 gauge steel construction White powder coat Hinged front lens assembly 2 1/4 depth 8 Ft. wire whip UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CSA 22.2 No. 250.13 CI D2 Groups A,B,C,D CII D2 Groups F,G 40 C Ambient Rating SLIM LIGHT LED HAZARDOUS - BOOTH - FRONT ACCESS BOOTH Example: 390420 LEDS5 1 2 3 1 SERIES 2 SOURCE 3 CCT 390420-LED: 2 Lamp Fixture 390440-LED: 4 Lamp Fixture 390460-LED: 6 Lamp Fixture L: Low Ballast Factor S: Standard Ballast Factor 5: 5000K* *Contact LDPI for availability of 5000K Lamp versions Models Input Voltage (VAC) Input Current (A) Input Frequency (Hz) Source (Ballast Factor) Luminaire Wattage (W) Nominal Lumen Output Color Temperature (CCT) 390420-LED 120-277 0.21-0.09 50/60 L: Low 25 2900 5000K 390420-LED 120-277 0.24-0.10 50/60 S: Standard 29 3300 5000K 390440-LED 120-277 0.42-0.18 50/60 L: Low 50 5800 5000K 390440-LED 120-277 0.48-0.21 50/60 S: Standard 58 6600 5000K 390460-LED 120-277 0.63-0.27 50/60 L: Low 75 8700 5000K 390460-LED 120-277 0.73-0.32 50/60 S: Standard 87 9900 5000K (Fixture dimensions are nominal. Cut-out dimensions are actual.) 2 1/4 Fixture Dimensions Mounting Dimensions C D Type Model A B C D E F 4 Ft. 2 Lamp 390420 9 1/2 13 50 51 7/8 10 3/4 7 4 Ft. 4 Lamp 390440 14 1/2 18 50 51 7/8 15 3/4 12 4 Ft. 6 Lamp 390460 19 1/2 23 50 51 7/8 20 3/4 17 A B * * 1/2" NPT Hub Location Note: Light Fixture s Glass Frame Extends 3/8 Into Booth When Mounted In Booth Panel. 4 FOOT SLIM LIGHT LED E 1 1/8 50 1/4 16 16 16 HOLE DETAIL (4 FT. FIXTURES) 5/16 TYP 1/2 TYP 1 7/8 5/16 DIA. 12 Holes F 50 7/8 1 7/8 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 43

BOOTH 400 LED HAZARDOUS - BOOTH - REAR ACCESS The 400 Series Rear Access fixture is an ideal paint spray booth product when a rear access fixture is desired. The 400 Series is also a vapor proof product with an ETL listing of Class I Division 2 rating. This 4 fixture is available with 2, 4 and 6 lamp options, can be built with low and standard ballast factor ballasts and is available with 5000K LED lamps. LED lamps and 8 Ft. wire whip Included. Piano hinged rear access 20 gauge steel construction White powder coat 8 Ft. wire whip UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 UL 8750 CSA 22.2 No. 250.13 APPLICATIONS Paint, Powder, Blast Booths Inspection / Prep Sanding CI D2 Grps A,B,C,D T3C 160 C CII D2 Grps F,G NFPA 33 40 C Ambient Rating Example: 390421 LED-S5 1 2 3 1 SERIES 2 SOURCE 3 CCT 390421-LED: 2 Lamp 390441-LED: 4 Lamp 390461-LED: 6 Lamp L: Low Ballast Factor S: Standard Ballast Factor 4: 4000K 5: 5000K Models Input Voltage (VAC) Input Current (A) Input Frequency (Hz) Source (Ballast Factor) Luminaire Wattage (W) Nominal Lumen Output Color Temperature (CCT) 390421-LED 120-277 0.21-0.09 50/60 L: Low 25 2900 5000K 390421-LED 120-277 0.24-0.10 50/60 S: Standard 29 3300 5000K 390441-LED 120-277 0.42-0.18 50/60 L: Low 50 5800 5000K 390441-LED 120-277 0.48-0.21 50/60 S: Standard 58 6600 5000K 390461-LED 120-277 0.63-0.27 50/60 L: Low 75 8700 5000K 390461-LED 120-277 0.73-0.32 50/60 S: Standard 87 9900 5000K (Fixture dimensions are nominal. Cut-out dimensions are actual.) C D 3 1/2 Fixture Dimensions Mounting Dimensions Type Model A B C D E F 4 Ft. 2 Lamp 390421 10 1/2 12 1/2 50 1/4 52 3/8 10 3/4 7 4 Ft. 4 Lamp 390441 15 1/2 17 1/2 50 1/4 52 3/8 15 3/4 12 4 Ft. 6 Lamp 390461 20 1/2 22 1/2 50 1/4 52 3/8 20 3/4 17 50 1/4 1 1/8 16 16 16 1 7/8 A B E 5/16 TYP HOLE DETAIL (4 FT. FIXTURES) 1/2 TYP Ø 5/16 DIA. 12 Holes F 50 7/8 1 7/8 44 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint Spray Booths Marine/Outdoor Chemical Plants The LE551 Series is a line of LED luminaries. The LE551 is made of a combination of cast aluminum and 5052-H23 aluminum. It is an explosion proof LED light fixture intended for use in hazardous location settings. Suitable for locations having deposits of readily combustible paint residues. It is available with different row options including 2, 3 and 4 rows and lengths. Depending on the configuration these luminaries can be surface mounted or hung. Cast Aluminum Factory sealed, cast aluminum, one piece painted aluminum reflector Borosilicate Glass Tube Lens Drill Rigs Refineries Coal Storage CI D1 Grps C,D CI D2 Grps A,B,C,D CII D1 Grps E,F,G ClII D2 Grps E,F,G CIII CI and ClII Simultaneous Presence Zone 1, Grp IIA and IIB UL844 CSA 22.2 No. 137.0 UL1598 Wet / Damp & Paint Spray CSA 22.2 No. 250.0 CSA 22.2 No. 250.13 40 C Ambient Rating LE551 EXPLOSION PROOF BOOTH Example: LE551-L3-V1-4-C-V-P 1 2 3 4 5 6 7 1 SERIES 2 SOURCE* 3 VOLTAGE 4 CCT 5 OPTIC 6 SHROUD 7 OPTIONS LE551 L1: 24W (2474Lm) 2 Ft. 2 Row L2: 34W (3498Lm) 2 Ft. 2 Row L3: 43W (5066Lm) 4 Ft. 2 Row L4: 64W (7164Lm) 4 Ft. 2 Row L5: 73W (8392Lm) 4 Ft. 3 Row L6: 86W (9873Lm) 4 Ft. 3 Row L7: 87W (10132Lm) 4 Ft. 4 Row L8: 128W (14328Lm) 4 Ft. 4 Row *Nominal Lumens V1: 120-277VAC, 50/60 Hz V2: 277-480VAC, 50/60 Hz 4: 4000K 5: 5000K BLANK: None D: Diffused Poly V: Vented E: Enclosed P: Polycarbonate Shield 1 WG: Stainless Steel Guard EM: Battery/Driver Backup (90min.) (L1 only) UL924 (L3 & L4 only) D1: Dimming (0-10V) D2: Dimming (DALI) PB: Powder Coat Black PW: Powder Coat White PG: Powder Coat Gray Note: If an option is not desired, leave the field blank. 1 Not available with (V) Vented Shroud Standard product will be PB Black with red accent PW & PG will be one color, no accents. If no color is specified, fixture will be bare aluminum. 4 Ft. Mounting Options Ordered Separately Item # Description Wall/Ceiling Kit 4401 For 2 or 3 Row 2 Ft. Wall/Ceiling Kit 4400 For 4 Row Must be factory installed Drop Mount Kit 4405 2 or 3 Row 4403 4 Row 2 or 3 Row 4 Row LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 45

LE551 EXPLOSION PROOF ADDITIONAL BOOTH Fixture Class I, D1 Groups C & D Operating Temperature codes Based on 40 C Ambient Class I, D2 Groups A, B, C & D Class II, D1 Groups E, F & G Class II, D2 Groups E, F & G Class III Class I and II Simultaneous Presence LE551 T6=85 C T6=85 C T4=135 C T4=135 C T4=135 C T4=135 C 2 Row 8.0" (203.2mm) 90 HUB (TYP.) 3 Row 13.4" (340.4mm) 4 Row 17.4" (442.0mm) 48.88" (1241.6mm) 53.63" (1362.2mm) 7.25" (184.15mm) 45 HUB (TYP.) Fixture Weight Shipping Weight 2 Row 40 Lbs. 43 Lbs. 3 Row 45 Lbs. 52 Lbs. 4 Row 80 Lbs. 84 Lbs. Options Factory Item # Description 4466 2 Row 2 Ft. WG: Stainless Steel Guards 4211 2 Row 4 Ft. Not for use in paint spray applications 4557 3 Row 4 Ft. 4211, (2) required 4 Row 4 Ft. 4464 2 Row 2 Ft. P: Polycarbonate Shields 4209 2 Row 4 Ft. (+/- 1/16 thickness) 4497 3 Row 4 Ft. 4209, (2) required 4 Row 4 Ft. All Mounting Options and Accessories are Ordered Separately 46 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Chemical / Oil / Gas Grain Processing Metals & Mining The 380 LED Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the fixture at more desirable angles. Center ballast placement provides a more balanced fixture for ease of installation and weight distribution. The 380 LED Series is available in 4 length for 2, 3, & 4 lamp combinations. LED lamps included. Factory sealed, cast aluminum, one piece aluminum reflector Borosilicate Glass Tube Lens CI D1 Grps C,D CI D2 Grps A,B,C,D Water Treatment CII D1 Grps E,F,G CII D2 Grps E,F,G CIII CI/CII Simultaneous Presence Zone 1, Grp IIA, IIB UL844 CSA 22.2 No. 137.0 UL1598A Marine Outside UL1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 UL8750 CSA 22.2 No. 250.13 NEMA 3, 4X, 7CD, 9EFG NFPA 33 NEC Article 516 40 C Ambient Rating 380 LED EXPLOSION PROOF BOOTH Example: 380-LEDS5-4L-4-UNV1-P 1 2 3 4 5 6 7 1 SERIES 2 SOURCE 3 CCT 4 LAMP QTY 380 LED S: Standard Ballast Factor 4: 4000K 5: 5000K 5 LENGTH 6 VOLTAGE 7 OPTIONS 4: 4 Ft. 347: 347V UNV1: 120-277V P: Polycarbonate Shield WG: Stainless Steel Guard 2L: 2 Lamps 3L: 3 Lamps 4L: 4 Lamps Fixture Class I, D1 Groups C & D Class I, D2 Groups A, B, C & D Operating Temperature codes Based on 40 C Ambient Class II, D1 Groups E, F & G Class II, D2 Groups E, F & G Class III Class I and II Simultaneous Presence 380 LED T6=85 C T6=85 C T4=135 C T4=135 C T4=135 C T4=135 C LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 47

380 LED EXPLOSION PROOF ADDITIONAL BOOTH 2 Lamp 45 HUB STD HUB 7 1/4 9 Fixture Weight Shipping Weight 2 Lamp 40 Lbs. 43 Lbs. 48 7/8 45 HUB 3 Lamp 45 Lbs. 52 Lbs. 4 Lamp 80 Lbs. 84 Lbs. 7 1/4 90 HUB 53 5/8 Mounting Options Ordered Separately Item # Description 3 Lamp Wall/Ceiling Kit 4401 For 2 or 3 Lamp 7 1/4 45 HUB STD HUB 13 45 HUB 48 7/8 Wall/Ceiling Kit 4400 For 4 Lamp (Must be factory installed) 4 Lamp 45 HUB 7 1/4 Drop Mount Kit 4405 2 or 3 Lamp STD HUB 18 3/4 4403 4 Lamp 48 7/8 45 HUB Options Item # Description WG: Stainless Steel Guards (Not for use in paint spray applications) P: Polycarbonate Shields (+/- 1/16 thickness) 4211 2 Lamp 4 Ft. 4557 3 Lamp 4 Ft. 4211, (2) required 4 Lamp 4 Ft. 4209 2 Lamp 4 Ft. 4497 3 Lamp 4 Ft. 4209, (2) required 4 Lamp 4 Ft. 48 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint Booths (Outside behind glass panel) Assembly Areas Fabricated with a white powder coat finish the 229H Series is ideal for a variety of industrial lighting needs. A unique hinged ballast cover provides easy access to internal wiring and ballast for installation or service without the need to remove lamps. The 229H uses a 5 Ft. 3-wire whip which reduces installation time by not having to open the fixture. Available in T8, T8HO, or T5HO lamps. Lamps not included. Heavy duty Open industrial fixture Hinged ballast plate allows for the fixture to be lamped prior to installation Sturdy 20 gauge steel with a white powder coat finish Task Lighting UL 1598 CSA 22.2 No. 250.0 229H ORDINARY LOCATION BOOTH Example: 229H-T5HO-4L-120-277-WG 1 2 3 4 5 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 VOLTAGE 5 OPTIONS 229H T5HO: 54W T8: 32W* T8HO: 44W 4L: 4 lamp 3L: 3 lamp 2L: 2 lamp 120-277: 120-277V 347-480: 347-480V (T5HO ONLY) WG: Zinc plated wire guard** A: Pattern 12 acrylic diffuser*** EM: Battery/Driver Backup (90 Min.) **Must be installed at the factory ***Diffuser is only available in 32W T8 NOTES: (Multiple voltages available, consult factory) *Normally stocked fixture (Consult factory for lead time on non-stock products.) 14 1/2 48 1/4 nominal WG: Zinc plated wire guard option 4 Optional Mounting - Ordered Separately PN: 3218 Chain hang kit 24 Chain piece (Qty. 2) Chain hanger bracket (Qty. 2) Ballast plate is hinged for easy access Wire whip not shown 229H Light fixture LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 49

BOOTH 400 HAZARDOUS - BOOTH - REAR ACCESS The 400 Series Rear Access product is an ideal paint spray booth product when a rear access fixture is desired. This series now has a 2 fixture as well as the 4 fixture cataloged. The 4 fixture comes in 2, 4 & 6 lamp with the following lamp options: T8 32W and T5HO 54W lamps. The 2-3 lamp fixture uses (3) T8 17W lamps. LAMPS SOLD SEPARATELY. Piano hinged rear access Telescopic lamp holders 20 gauge steel construction (enclosed and gasketed) White powder coat housing APPLICATIONS Industrial Clean Rooms Paint and Powder Booths UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D T3C 160 C CII D2 Grps F,G T3C 160 C NFPA 33 40 C Ambient Rating Prep, Inspection, Sanding Areas Example: 490231-3456-EM SERIES MODEL # DESCRIPTION OPTIONS 400 390231-3546 390421-3613 390421-6975 390421-3265 390441-6974 390441-4843 390461-7059 390461-3265 NOTES: Multiple voltages available, consult factory. Fixture dimensions are nominal. Cut-out dimensions are actual. 3 Lamp T8 17W, 2 Ft. 2 Lamp T8 32W, 4 Ft. 2 Lamp T8 32W HLO, 4 Ft. 2 Lamp T5 54W HO, 4 Ft. 4 Lamp T8 32W HLO, 4 Ft. 4 Lamp T5 54W HO, 4 Ft. 6 Lamp T8 32W HLO, 4 Ft. 6 Lamp T5 54W HO, 4 Ft. EM: Battery/Driver Backup (90 Min.) 5901: 8 Ft. 3-Wire Whip 1 7/16 5/16 TYP E 10 3/4 12 HOLE DETAIL (2 FT. 390231) 26 7/8 Ø 5/16 DIA. 10 Holes 26 1/4 12 1/2 TYP 1 7/8 F Fixture Dimensions Mounting Dimensions Model A B C D E F 390231 10 1/2 12 1/2 26 28 3/8 11 3/4 8 390421 10 1/2 12 1/2 50 1/4 52 3/8 10 3/4 7 390441 15 1/2 17 1/2 50 1/4 52 3/8 15 3/4 12 390461 20 1/2 22 1/2 50 1/4 52 3/8 20 3/4 17 3 1/2 C D 50 1/4 1 1/8 16 16 16 1 7/8 E 5/16 TYP HOLE DETAIL (4 FT. FIXTURES) 1/2 TYP Ø 5/16 DIA. 12 Holes F A B 50 7/8 1 7/8 50 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Industrial Paint and Powder Booths Blast Booths The 400SLB Series Inside Access fixture features a 20 gauge powder coated, shallow steel housing that is 2 deep. This 4 Ft. fixture is available as a 4 or 6 lamp fixture with T8 and T5HO lamping options. This series provides front door fixture access with a completely removable lens assembly and comes with a paint spray cutoff switch. LAMPS SOLD SEPARATELY. 20 gauge steel construction with a powder coat finish Front access housing for convenient relamping and servicing Prep, Inspection, Sanding Areas UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D T4 135 C CII D2 Grps F,G T4 135 C 40 C Ambient Rating 400SLB HAZARDOUS - BOOTH - FRONT ACCESS BOOTH Example: 400SLB-T8-4L-UNV1-PC-PB 1 2 3 4 5 6 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 400SLB T5HO: 54W 4L: 4 Lamps T8: 32W 6L: 6 Lamps 4 VOLTAGE 5 FINISH 6 REFLECTOR UNV1: 120-277V UNV2: 347-480V (T5HO only) PC: Powder Coated Steel SS: Stainless Steel Powder Coated White AS: Aluminized Steel PR: White Powder Coat HB: High Brightness Reflector Fixture dimensions are nominal. Cut-out dimensions are actual. 7/8 TYP 13 3/4 (4 LAMP) 18 3/4 (6 LAMP) 17 3/4 (4 LAMP) 22 3/4 (6 LAMP) 1/2 CONDUIT HUB 54 5/8 1/2 2 7/8 TYP 50 52 2 16 16 16 2 2 7/16 15 3/4 (4 LAMP) 20 3/4 (6 LAMP) 9/16 TYP 9/16 TYP HOLE DETAIL (4 LAMP AND 6 LAMP FIXTURES) Ø 5/16 12 PLCS 53 1/8 12 (4 LAMP) 17 (6 LAMP) 2 7/16 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 51

BOOTH SLIM LIGHT HAZARDOUS - BOOTH - FRONT ACCESS The Slim Light Series features a low profile housing that is only 2 1/4 thick maximizing the available space allowed for your paint spray booth. The Slim Light Series is available in lengths of 3 & 4 with 2, 4 or 6 lamp options. The 3 fixtures are available in T8 25 watts. The 4 fixtures are available in 32 and 54 watts T5HO, T8 or T8HLO. This series provides a hinged front access door with a paint spray cutoff switch when opened. Must be mounted hinge side up when wall mounted. LAMPS SOLD SEPARATELY. 20 gauge steel construction White powder coat A hinged front access door provides convenient access, and the 2 1/4 depth minimizes the space needed. APPLICATIONS Industrial Paint and Powder Booths Blast Booths UL 844 CSA 22.2 No. 137.0 UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CI D2 Grps A,B,C,D Prep, Inspection, Sanding Areas CII D2 Grps F,G T3C 160 C 40 C Ambient Rating Example: 390320-3613-EM SERIES MODEL # DESCRIPTION OPTIONS Slim Light 3 Ft. 390320-3613 390340-3546 390360-3546 T8 25W, 2 Lamp T8 25W, 4 Lamp T8 25W, 6 Lamp EM: Battery/Driver Backup (90 Min.) - T8 (2 and 4 Lamp fix. only - 120 and 277V only) Wire whip Slim Light 4 Ft. 390420-3613 390420-6975 390420-3265 390440-3546 390440-6747 390440-4843 T8 32W, 2 Lamp T8 32W HLO, 2 Lamp T5 54W HO, 2 Lamp T8 32W, 4 Lamp T8 32W HLO, 4 Lamp T5 54W HO, 4 Lamp EM: Battery/Driver Backup (90 Min.) - T8 (120 and 277V only) EM: Battery/Driver Backup (90 Min.) - T5HO (Deeper Housing, 2 and 4 lamp fixtures, 120 and 277V only) HSR: High Performance Specular Reflector (440 T8 and T8HLO only) HWR: High Performance White Reflector (440 T8 and T8HLO only) Slim Light 4 Ft. 6 Lamp 390460-3546 390460-7059 390460-3265 T8 32W, 6 Lamp T8 32W HLO, 6 Lamp T5 54W HO, 6 Lamp EM: Battery/Driver Backup (90 Min.) - T8 (120 and 277V only) 38 1/4 Fixture Dimensions Mounting 3 1/8 16 16 1 7/8 Type Model A B C D E F 3 Ft. 2 Lamp 390320 9 1/2 13 38 39-7/8 10 3/4 7 E 3 FT. FIXTURE HOLE DETAIL 5/16 TYP 1/2 TYP 5/16 DIA. 10 Holes F 3 Ft. 4 Lamp 390340 14 1/2 18 38 39-7/8 15 3/4 12 3 Ft. 6 Lamp 390360 19 1/2 23 38 39-7/8 20 3/4 17 4 Ft. 2 Lamp 390420 9 1/2 13 50 51-7/8 10 3/4 7 38 7/8 1 7/8 4 Ft. 4 Lamp 390440 14 1/2 18 50 51-7/8 15 3/4 12 4 Ft. 6 Lamp 390460 19 1/2 23 50 51-7/8 20 3/4 17 Note: light fixture s glass frame extends 3/8 into booth when mounted in booth panel. E 1 1/8 50 1/4 16 16 16 4 FT. FIXTURE HOLE DETAIL 5/16 TYP 1/2 TYP 1 7/8 5/16 DIA. 12 Holes F 1/2 NPT CONDUIT HUB T5HO ONLY A B * C D * 2 1/4 ** ** (T5HO EM fixture is 3 1/2" deep) * HUB LOCATIONS 50 7/8 1 7/8 52 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Chemical Processing Grain Processing Metals & Mining The 380 Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the fixture at more desirable angles. Center ballast placement provides a more balanced fixture for ease of installation and weight distribution. The 380 Series is available in 2 & 4 lengths for 2, 3, & 4 lamp combinations in T5, T5HO, T8, T8HO. Lamps included. Factory sealed, cast aluminum Ballast mounted in the center (5) 1/2 NPT Hubs One piece aluminum reflector.189 wall Borosilicate tubes Oil / Gas Water Treatment UL 844 CSA 22.2 No. 137.0 UL 1598A Marine Outside UL 1598 Wet / Damp, Paint Spray CSA 22.2 No. 250.0 CI D1 Grps C,D T6 85 C CI D2 Grps A,B,C,D T4 135 C CII D1 Grps E,F,G T4 135 C CII D2 Grps E,F,G T4A 135 C CIII T4A 135 C CI and CII simultaneous presence T4 135 C Zone 1, Group IIA, IIB NEMA 3, 4X, 7CD, 9EFG NFPA 33, and NEC Article 516 380 EXPLOSION PROOF BOOTH Example: 380-T8-3L-4-UNV-EM 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 LENGTH 5 VOLTAGE 6 OPTIONS 380 T5** T5HO* T8* T8HO** 1 2 3 4 5 6 2L: 2 Lamp 3L: 3 Lamp 4L: 4 Lamp 2: 2 Ft. UNV: Universal Voltage 4: 4 Ft. 120-277V, 50/60Hz 347: 347V EM: Battery/Driver Backup (90 Min.) (4 Ft. 2 lamp ONLY - UL Listed) HB: 93% Reflective specular reflector insert Notes: *5000K lamp standard for T5HO and T8 lamps **4100K lamp standard for T8HO and T5 lamps All T5, T5HO, T8, and T8HO are universal voltage **T8HO Lamp Type not available in 2 Ft. fixture. *347 Volt only available in T5HO and T8. 3 and 4 Lamp fixtures not available in 2 Ft. length. 3 lamp fixtures not available in T5 or T8HO Normally stocked. Consult factory for non-standard fixtures Lamp Wattages 2 Ft. Watts 4 Ft. Watts T5 14 T5 28 T5HO 24 T5HO 54 T8 17 T8 32 T8HO n/a T8HO 44 Operating Temperature Codes Based on 40 C Ambient Class I, Div. 1 Groups C and D T6 = 85 C Class I, Div. 2 Groups A, B, C, D T4 = 135 C Class II, Div. 1 Groups E, F, G T4 = 135 C Class III T4 = 135 C Simultaneous Presence Class I and II T4 = 135 C Mounting Options Item # Description Wall/Ceiling Kit 4401 For 2 or 3 Lamp All Mounting Options and Accessories are Ordered Separately Accessories Item # Description Wall/Ceiling Kit 4400 For 4 Lamp (Must be factory installed) WG: Stainless Steel Guards (Not for use in paint spray applications) 4466 2 Lamp 2 Ft. 4211 2 Lamp 4 Ft. 4557 3 Lamp 4 Ft. 4211, (2) required 4 Lamp 4 Ft. Drop Mount Kit 4405 2 or 3 Lamp 4403 4 Lamp P: Polycarbonate Shields (+/- 1/16 thickness) 4464 2 Lamp 2 Ft. 4209 2 Lamp 4 Ft. 4497 3 Lamp 4 Ft. 4209, (2) required 4 Lamp 4 Ft. LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 53

380 EXPLOSION PROOF ADDITIONAL DIMENSIONS (Nominal) BOOTH 2L 2FT. Dimensions 45 HUB STD HUB 7 1/4 9 90 HUB 24 7/8 45 HUB 29 5/8 45 HUB 7 1/4 STD HUB 9 90 HUB 48 7/8 45 HUB 53 5/8 7 1/4 45 HUB STD HUB 45 HUB 13 90 HUB 48 7/8 53 5/8 4L 4FT. Dimensions 45 HUB 7 1/4 STD HUB 18 3/4 90 HUB 48 7/8 45 HUB 7 1/4 7 1/4 7 1/4 7 1/4 2L 4FT. Dimensions 3L 4FT. Dimensions 53 5/8 54 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

BOOTH ACCESSORIES Cling-On Lens Protection 3 Mil plastic with custom acrylic adhesive Protects lens coverings from over-spray Applies easily to clean lens Available In 12, 18 and 25 widths 100 Feet per roll 12 Film - Part Number: 3263 Single Roll or Case of 4 18 Film - Part Number: 3188 Single Roll or Case of 2 25 Film - Part Number: 4348 Single Roll NOTE: Does not fit on 3312 Handle Dispenser Handle - Part Number: 3312 NOTE: For 12 and 18 Film Rolls ONLY Clear-View Lens Pads Transparent self-adhesive multi-sheet system protects windows and light fixtures from over-spray in paint booths. This product consists of twenty individual layered pads that are tabbed and peels off for easy removal after use. With easy installation and quick changeover this product is a clear choice for your cleanup solution. 20 count per pad: Case PK QTY of 6 3800: (13 x 51 ) 4855: (24 x 50 ) 5303: (18 x 46 ) BOOTH Blast Booth Lens Cover Blast Booth Panel Fasteners Not Included in Kit Booth Interior 24 3/4 (4 lamp) 30 7/8 (6 lamp) For use with the Slim Light, 400, Slim Light LED, and 400 LED Series. Helps protect fixture from high pressure blast media 1/16 clear polycarbonate lens Lenses are easily interchangeable Perfect for rear access fixtures For front access, lens cover needs to be removed for relamping. 29 29 4 lamp fixtures 6 lamp fixtures Lens Kit - P/N 3318 Lens Kit - P/N 7668 Lens Only - P/N 3316 Lens Only - P/N 7682 Corner/Hip Mount 2 3/4 Horizontal or Vertical Mounting Corner/Hip Light Kit The following is an acceptable method of installing panel mounted fixtures into the corner of a paint spray booth. Check with your electrical inspector to verify your local regulations. 77 5/16" To reduce shadowing, corner or hip lighting is ideal. Corner light mounting option is available for: Slim Light and Slim Light LED Series ONLY. FIXTURE SOLD SEPARATELY Shipping weight: 14#. Fixture Part # 390440J-3546 4714 22 1/2" 11 1/8" Notes: All wiring must be performed by a certified electrician and in accordance with all national and local electrical codes and regulations. Mounting requires drilling 7/8 hole in booth wall or ceiling to route flex conduit out of booth. 15 13/16" 15 13/16" LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 55

NOTES

INSPECTION LIGHTING

INSPECTION LIGHTING SERIES Class I D1 Class I D2 Class II Class III Corrosion Resistant Paint Spray Marine Wet Damp General Industrial Page # LEINS2 59 LEINS3 60 LEINS4 61 INS2 62 INS3 63 We use our best effort to make our catalog accurate. We reserve the right to correct typographical errors and omissions. Specifications may be changed subsequent to printing. LED LIGHTING FLUORESCENT

APPLICATIONS Paint Inspection Plastic Inspection Defect Detection The LEINS2 is an LED Inspection lighting fixture that was specifically designed for focusing light in a particular direction for inspection and surface defect detection applications. This fixture is capable of saving 45% or more energy than the traditional fluorescent fixture, and has an excellent economic efficiency by greatly reducing maintenance costs while eliminating the need for handling and disposing of hazardous material. Extruded Aluminum Housing, Powder Coated Black Finish >50,000 Hours CCT - 5000K UL 1598 CSA 22.2 No. 250.0 LM-79, LM-80 50 C Ambient Rating LEINS2 INSPECTION INSPECTION Example: LEINS2-P13-V1-4-PB-C 1 2 3 4 5 6 1 SERIES 2 SOURCE 3 VOLTAGE 4 LENGTH 5 FINISH 6 OPTIONS LEINS2 P8 P13 P21 PB: Powder Coat Black PW: Powder Coat White V1: 120-277V 2: 2 Ft. 4: 4 Ft. 6: 6 Ft. 8: 8 Ft. C: Cord with Blunt End CP1: Cord with 120V Plug CP2: Cord with 277V Plug EM: Battery/Driver Backup (90 Min.) Ceiling/Wall Mount Kit (PN: 8171) Cable/Chain Mount Kit (PN: 8170) Universal Mount Kit (PN: 10568) SOURCE P8 P13 P21 LENGTH NOMINAL LUMENS LUMINAIRE WATTAGE INPUT VOLTAGE INPUT CURRENT (A) 2' 950 8 120-277 0.07/0.03 4' 1900 14 120-277 0.12/0.05 6 2850 22 120/277 0.19/0.08 8' 3800 28 120-277 0.24/0.10 2' 1500 13 120-277 0.11/0.05 4' 2630 26 120-277 0.22/0.10 6 4130 39 120/277 0.33/0.15 8' 5300 51 120-277 0.43/0.19 2' 2100 21 120-277 0.18/0.08 4' 4200 42 120-277 0.35/0.16 6 6300 63 120/277 0.53/0.24 8' 8400 84 120-277 0.70/0.31 MOUNTING CHANNEL END CAP 4 11/16" 23 15/16" 23 1/2" 5 9/16" Carriage Screw Mounting Track. Provided With (2) Ø 5/16" X 3/4" Carriage Screws. Die Cast Connector 3/8" Trade Size 45 15/16" 45 1/2" Fixture with optional 6 Ft. cord and plug 89 15/16" 89 1/2" LEINS2 Inspection tunnel Diffuser Detail LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 59

INSPECTION LEINS3 INSPECTION The LEINS3 Series is a must have when the finish of any surface counts! This fixture is constructed from 20 gauge cold rolled steel and has a powder coated finish. This fixture is designed to create a well defined lamp image using light and dark contrasts that cause defects in the paint show to show for ease of detection and repair. This fixture is available as a 2, 4, 6, and 8 fixture and has the flexibility to allow the use of 1, 2 or 3 rows of LED s. There are a multitude of lens, cord and housing color options in this fixture Series. 20 Gauge Steel Powder Coated Housing Acrylic or Polycarbonate Lens Can be used in conjunction with dimming drivers UL1598 CSA 22.2 No. 250.0 UL8750 CSA 22.2 No. 250.13 50 C Ambient Rating APPLICATIONS Paint/Plastic Inspection Defect Detection Finesse Decks Inspection Decks Polish Decks Example: LEINS3-P9-6-4-V1-D1-C-LA-RS-4-PB 1 2 3 4 5 6 7 8 9 10 11 12 1 SERIES 2 HOUSING 3 SOURCE 4 LENGTH 5 ROWS 6 VOLTAGE LEINS3 Blank: Std W: Wide Housing (2 row only) V1: 120-277V P4: 68W (6200Lm)* P6: 94W (8800Lm)* P9: 148W (12800Lm)* *Nominal power (watts and lumens) output for a 4 Ft., 4 row fixture at 5000K. See table below for other configurations. 2: 2 Ft. 4: 4 Ft. 6: 6 Ft. 8: 8 Ft. 1 (No 2 Ft.) 2 3 4 (No 8 Ft.) 7 DIMMING 8 CORD 9 LENS 10 REFLECTOR 11 CCT 12 FINISH Blank: No Dimming D1: Step Dimming (Not available for all sizes) D2: 0-10V D3: DALI (Not available for all sizes) Blank: No Cord C: 6 Ft. Blunt End Cord C1: 6 Ft. Cord with 120V Twist Lock Plug C2: 6 Ft. Cord with 277V Twist Lock Plug Nominal lumen output per fixture configuration LF: Tempered Glass Lens with Frosted Lens Insert LFS: Tempered Glass Striped Lens with Frosted Insert LG: Tempered Glass Lens LGL: Tempered Glass Lens with Linear Gradient Insert LGS: Tempered Glass Striped Lens RS: Aluminum Specular Reflector RDW: Soft Diffuse White Reflector RW: Reflective White Reflector 3: 3000K 4: 4000K 5: 5000K 6: 6000K PB: Powder Coat Black PW: Powder Coat White 1 Row 2 Row 3 Row 4 Row Source Watts 2 Ft. 4 Ft. 6 Ft. 8 Ft. LENS LENS Watts LG, LGL, LF LGS, LFS LG, LGL, LF LGS, LFS Watts LG, LGL, LF LENS LGS, LFS Watts LG, LGL, LF P4 17 1550 850 26 2300 1300 34 3100 1700 P6 N/A 24 2200 1200 36 3300 1800 47 4400 2400 P9 37 3200 1750 56 4800 2650 74 6400 3500 P4 17 1550 850 34 3100 1700 52 4600 2600 68 6200 3400 P6 24 2200 1200 47 4400 2400 71 6600 3600 94 8800 4800 P9 37 3200 1750 74 6400 3500 111 9600 5300 148 12800 7000 P4 26 2300 1300 51 4650 2550 78 6900 3900 102 9300 5100 P6 36 3300 1800 71 6600 3600 107 9900 5400 141 13200 7200 P9 56 4800 2650 111 9600 5250 167 14400 7950 222 19200 10500 P4 34 3100 1700 68 6200 3400 104 9200 5200 P6 48 4400 2400 94 8800 4800 142 13200 7200 N/A P9 74 6400 3500 148 12800 7000 222 19200 10600 Example: A 4 Ft. fixture with 3 rows of LEDs with a P9 power source will deliver approximately 9600 lumens with a LG, LGL or LF type lens. LENS LGS, LFS 60 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint Inspection Plastic Inspection Defect Detection The next generation inspection fixtures and system are under development from LDPI. The LEINS4 will feature a compact, lightweight, modular design, with multiple mounting configurations. A tandem feed thru adapter will allow continuous linear seamless imaging up to 16Ft. Improved wire management and multiple control options will allow flexible integration into their inspection system. Contact LDPI for more information. Linear Design UL1598 50 C Ambient Rating PENDING LEINS4 INSPECTION INSPECTION Example: LEINS4-xxx-xxx-xxx ALL PRELIMINARY. CONTACT LDPI FOR AVAILABILITY AND MORE FEATURES UL1598 certifications 50 C Ambient Rating Linear Design with Lumen packages from 950 to 8400Lm 5000CCT Emergency Battery Driver (90 Min.) UL924 Ceiling, Cable/Chain, and Uni-strut mounting options Dimming options ( 0-10V, Dali) PRELIMINARY LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 61

INSPECTION INS2 INSPECTION INS2 fixture is specifically designed for inspection and defect detection applications. The proprietary refractor on the INS2 fixture creates distinct luminance edges on painted surfaces which significantly increases the visibility of topographic defects such as dirt in paint, runs, sags, craters, etc. This fixture is available in multiple lengths and can be installed as a stand-alone unit or in a continuous row up to 16 long. It features a black powder coated housing and end caps with an integrated channel on the backside of the housing to allow for surface, pendant, cable or various other Mounting options. Lamps included. Black powder coat housing and end caps 6063 T6 Extruded aluminum Custom powder coat colors or anodized finishes available upon request UL 1598 CSA 22.2 No. 250.0 APPLICATIONS Paint Inspection Plastic Inspection Defect Detection Example: INS2-T8-1L-4-UNV1-PB-CP6 1 2 3 4 5 6 7 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 VOLTAGE 5 LENGTH (Ft.) 6 FINISH 7 CORD/PLUG INS2 T8: 17W (2 Ft.) 32W (4 Ft.) 59W (8 Ft.) PB: Powder Coat Black AB: Anodized Black 1L: 1 Lamp 2L: 2 Lamp 3L: 3 Lamp 4L: 4 Lamp 120: 120V 277: 277V UNV1: 120/277V 347: 347V 2: 2 Ft. 4: 4 Ft. 8: 8 Ft. 12: 12 Ft. 16: 16 Ft. C6: 6 Ft. Cord no plug CP6: 6 Ft. Cord with plug Notes: UNV1 (Universal voltage) is standard on fixtures without cords. When ordering fixture with a cord (CP6) specify the voltage accordingly. Standard plug is a NEMA rated straight blade. Available Lamp Configurations Nominal Fixture Length QTY of Lamps Nominal Lamp Length 2 Ft. 1 24 in. 4 Ft. 1 48 in. 8 Ft. 1 96 in. 8 Ft. 2 48 in. 12 Ft. 3 48 in. 16 Ft. 2 96 in. 16 Ft. 4 48 in. 4 11/16" 26 5/16" 25 1/8" 2 Ft. Fixture 5 17/32" 5/16"-18 CARRIAGE SCREW MOUNTING TRAC 50 5/16" 4 Ft. Fixture 49 1/8" MOUNTING CHANNEL 5 17/32" END CAP 98 5/16" 8 Ft. Fixture 97 1/8" OPEN END INS2 Inspection tunnel. 5 17/32" CORD END 62 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Paint Inspection Plastic Inspection Defect Detection The INS3 Series is a must have when the finish of any surface counts! This fixture is constructed from 20 gauge cold rolled steel and has a powder coated finish. This inspection fixture is designed to create a well defined lamp image using light and dark contrasts that cause defects in the paint to show for ease of defect detection and repair. This fixture is available as a 2, 4 or 8 fixture and is available in a 1, 2, or 3 lamp option. Lamps included. 20 Ga. steel with powder coated finish Optional dimming ballast for 4 ft fixtures Finesse Decks Polish Decks UL 1598 CSA 22.2 No. 250.0 40 C Ambient Rating INS3 INSPECTION INSPECTION Example: INS3-T8-3L-4-V1-D1-C6-CG-WO-5-W 1 2 3 4 5 6 7 8 9 10 11 1 SERIES 2 LAMP TYPE 3 LAMP QUANTITY 4 LENGTH 5 VOLTAGE 6 DIMMING* INS3 T8: 17W (2 Ft.) 32W (4 Ft.) 1L: 1 Lamp 2L: 2 Lamp 2: 2 Ft. 4: 4 Ft. V1: 120-277V 12: 120V D1: 0-10V D2: DALI 59W (8 Ft.) 3L: 3 Lamp 8: 8 Ft. 27: 277V 34: 347V 7 CORD 8 LENS 9 REFLECTOR 10 LAMP** 11 FINISH C6: 6 Ft. Cord no Plug C: 6 Ft. Blunt End Cord CP: 6 Ft. Cord with Twist Lock Plug (Specify voltage 120, 277 or 347) GC: Clear Glass GS: Clear Glass with Stripes AC: Clear Acrylic AS: Clear Acrylic with Stripes PC: Clear Polycarbonate PS: Clear Polycarbonate with Stripes NL: No Lens SR: Specular WO: Diffuse White WR: White 3: 3500K 4: 4100K 5: 5000K 6: 6500K*** W: White Powder Coat B: Black Powder Coat S: Special powder coat color (Specify RAL number INS special suffix location) NOTES: * 4 Ft. Fixture Only ** Specify three digit code for lamps. Example: For a 3-lamp fixture with two 5000K lamps in the outside positions and a 3500K lamp in the center position the code would be 535. *** 2 Ft. and 4 Ft. Lamps Only Dimensions POWDER COAT HINGE TYPE A B C 2 Ft. 1 L 26" 9 7/8" 23 3/4" 2 Ft. 2 L 26" 17 7/16" 23 3/4" 2 Ft. 3 L 26" 25" 23 3/4" 4 Ft. 1 L 50" 9 7/8" 47 3/4" 4 Ft. 2 L 50" 17 7/16" 47 3/4" 4 Ft. 3 L 50" 25" 47 3/4" 8 Ft. 1 L 96" 9 7/8" 70" 8 Ft. 2 L 96" 17 7/16" 70" 8 Ft. 3 L 96" 25" 70" A 3 1/8" B MOUNTING HOLES Ø 3/8-16 UNC NUT RIVETS 4 PLCS C MOUNTING 5/8" LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 63

NOTES

SPECIALTY PRODUCTS

SPECIALTY PRODUCTS SERIES Portable Page # Task Cart 67 Multi Carts 68 XP Cart 69 Custom 70

APPLICATIONS Inspection Task Lighting The single fixture light cart is designed to provide portable lighting solutions for applications ranging from inspection to laboratory and general industrial task lighting. Light fixture options allow you to customize your cart to fit your work application requirements. SOME ASSEMBLY REQUIRED. FIXTURES INS: Inspection with tempered, striped lens (lamps included) I: Task/Open industrial with polycarbonate lens (lamps included) FIXTURE ONLY ETL listed. U.S. and Canada INS: Non-Hazardous I: UL 1598 ONLY Example: 4346-INS-120 TASK CART PORTABLE LIGHTING Fixture Only SPECIALTY 1 2 3 1 SERIES 2 FIXTURE 3 VOLTAGE 4346: Light Cart INS: Inspection (Tempered, Striped Glass) I: Open industrial (UL 1598) 120: 120V Straight Blade Plug 277: 277V Twist Lock Plug 20 Ft. Power Cord 7638: Optional Shelf Tray (2 per cart) Cart Frame 8 Semi-Pneumatic Ball Bearing Wheels LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 67

SPECIALTY MULTI-FIXTURE CART PORTABLE LIGHTING Vertical Mount Shown with optional tool tray Fixture Only Horizontal Mount 2 Fixture Only The 4 Ft. 2 and 3 fixture light carts are designed to provide portable lighting solutions for applications ranging from inspection to laboratory and general industrial task lighting. A 4 Ft. single fixture horizontal mount cart is also available for all fixture types. Fixtures are attached with swivel mounting brackets allowing for directional aiming of the light (Hazardous location fixtures are stationary mounted). ASSEMBLY REQUIRED. FIXTURE INS: Inspection with tempered, striped lens (lamps included) (vertical mount recommended) I: Task/open industrial (lamps included) FIXTURE ONLY ETL listed. U.S. and Canada INS: Inspection I: UL 1598 ONLY Example: 3668-P-I-120 APPLICATIONS Inspection Task Lighting 1 2 3 4 1 SERIES 2 WHEELS 3 FIXTURE 4 VOLTAGE 3668: 2 Fix. Cart 3669: 3 Fix. Vertical Cart 4520: 1-4 Ft. Horizontal Cart P: 10 Tires Pneumatic (Std) INS: Inspection Tempered, Striped Glass I: Open Industrial (UL 1598) 120: 120V Straight Blade Plug 277: 277V Twist Lock Plug 25 Ft. Main Power Cord 7641: Optional Outlet Box Standard 10 Pneumatic Tires 7640: Optional Tool Tray With Adjustable Shelves Standard 10 Non-Swivel Pneumatic Tires 3 Fixture Inspection Cart 7640 and 7641 are for Multi Fixture Carts ONLY. 3 Fixture Cart Vertical Mount ONLY 4520: 1-4Ft. Horizontal Fixture 68 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

APPLICATIONS Industrial Task Lighting Lighting for Explosive Environments - The 380 Portable Light Cart is manufactured in accordance with applicable NFPA standards. For use in hazardous environments and laboratory applications. Portable lighting solutions for hazardous atmospheres. Light can be directed where you need it most. Fixture(s) sold separately. LDPI recommends consulting local authorities for approval of your application prior to purchase. Frame constructed of corrosion resistant aluminum - FIXTURE ONLY UL listed 844 U.S. and Canada for hazardous locations UL listed 1598 U.S. and Canada for wet locations UL listed 1598A U.S. and Canada for marine locations EXPLOSION PROOF CART PORTABLE LIGHTING 380 Series Cart 4 Lamp SPECIALTY Fixture Only Example: 4372-2-380-T8-2-4-120-HB 1 2 3 4 5 6 7 1 CART 2 SERIES 3 LAMP TYPE 4 LAMP QUANTITY 5 LENGTH 6 VOLTAGE 7 OPTIONS 4372-2: 2 Lamp Cart 4372-3: 3 Lamp Cart 4372-4: 4 Lamp Cart 380 T5**: 28W T5HO*: 54W T8*: 32W T8HO**: 44W Notes: All T5, T5HO, T8, and T8HO are universal voltage *5000K lamp standard for T5HO and T8 lamps **4100K lamp standard for T8HO and T5 lamps ***3 lamp fixtures not available in T5 or T8HO 2: 2 Lamps 3: 3 Lamps*** 4: 4 Lamps 4: 4 Ft. UNV: Universal Voltage 120-277V, 50/60Hz HB: 93% Reflective specular reflector insert LDPI recommends consulting local electrical authorities for approval of your application prior to purchase. Dimensions 58 24 24 4 LAMP 2 LAMP 23 3/4 27 5/8 29 9/16 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 69

CUSTOM LIGHTING SPECIALTY Application Specific Lighting Need a Custom or Special Fixture? LDPI, Inc. is an excellent source for that special needs custom lighting fixture. LDPI, Inc. has the in-house engineering and manufacturing experts to handle most any need for Harsh or Hazardous Environments. Examples of the LDPI, Inc. Customizing Capabilities: Lumen Packages Stainless Steel Powder Coat Custom RAL Colors Custom Cord Installation Mounts to Meet your Application Light Controls Fixture Protection Guards If you do not see what you are looking for, contact us and we will design a custom package to meet your application needs. email: custom@ldpi-inc.com or call our toll free number: 1-800-854-0021 Undercarriage Inspection Cart 376 Series: Wet/Damp Inspection Cart Custom Fixture Housing Examples of Custom Applications: Paint Booths Inspection Areas Waste Water Treatment Facilities Warehousing Military Applications Laboratories Oil Refineries Offshore Rigs Chemical Plants Breweries Grain Handling Food Processing Ammunition Manufacturing Coal, Gold, Copper, Silver Mining Pulp and Paper Manufacturing General Manufacturing Plants Steel Mills and Foundries Utility Power Plants Marine and Coastal Facilities Automobile Manufacturing Shipyards and Ship Building Flour, Sugar, Starch Processing Paint Manufacturing Rubber Manufacturing Aerospace Facilities Aircraft Manufacturing Airplane Hangers Boat Dry Stack Boat Painting and more... 70 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

FUNDAMENTALS OF LIGHTING

FUNDAMENTALS OF LIGHTING Glossary Pg. 73 Lighting Fundamentals Pg. 74 IP Code Pg. 75 Light: Levels and Color Pg. 75 Weights - Shipping Pg. 76

GLOSSARY Ballast factor (BF) - the ratio of light output of a lamp operated by a given ballast to the light output of the same lamp when operated by a reference ballast. Lamps operated by a ballast with BF of 0.90 will provide 90 percent of their rated light output (lumens). BFs between 0.85 and 1.0 are the most common. Color rendering index (CRI) - a method for describing the effect of a light source on the color appearance of objects being illuminated, with a CRI of 100 representing the reference condition (and the maximum CRI possible). In general, a lower CRI indicates that some colors may appear unnatural when illuminated by a lamp. Color temperature - see correlated color temperature. Constant-wattage autotransformer (CWA) - the most common type of ballast used for HID lamps, it maintains a constant power (wattage) supply to the lamp when system input voltage fluctuates. Cord - Typically an insulated cable of 14 Ga. 3-wire or 5-wire leads pre-wired for installation. This may or may not include a plug, depending on the options selected. Correlated color temperature (CCT) - a description of the color appearance of a light source in terms of warmth or coolness, as measured on the Kelvin scale (K). As the temperature rises, the color appearance shifts from yellow to blue. Thus, lamps with a low CCT (3000K or less) have a yellow-white color appearance and are described as warm ; lamps with a high CCT (4000K and higher) have a blue-white color appearance and are described as cool. FUNDAMENTALS Disability glare - light that is relatively bright compared to the background, making vision measurably worse. The inability to see clearly as a result of the brightness of headlights from an oncoming car at night is an example. Discomfort glare - the type of glare that is uncomfortable and distracting, yet less obvious than disability glare. A bright light source in an individual s peripheral vision is an example. Efficacy - the ratio of light output (lumens) to input power (watts) expressed in lumens per watt (LPW). High pressure sodium (HPS) - a high-intensity discharge lamp type that uses sodium under high pressure as the primary light-producing element. Illuminance - The amount of light that reaches a surface. Illuminance is measured in footcandles (lumens/square foot) or lux (lumens/square meter). One footcandle equals 10.76 lux, although for convenience the IESNA uses 10 lux as the equivalent. Instant-start - a method of starting fluorescent lamps. The voltage, which is applied across the electrodes to strike the electric arc, is up to twice as high as it is with other starting methods. The higher voltage is necessary because the electrodes are not heated prior to starting. Lamp life - the median life span of a very large number of lamps. Half of the lamps in a sample are likely to fail before the rated lamp life, and half are likely to survive beyond the rated lamp life. Lamp lumen depreciation (LLD) - the reduction in lamp light output that progressively occurs during lamp life. LED - Light-emitting diode: a semiconductor diode that emits light when conducting current. Lumen (lm) - a unit of measurement of the rate at which a lamp produces light. A lamp s light output rating expresses the total amount of light emitted in all directions per unit time. Ratings of initial light output provided by manufacturers express the total light output after 100 hours of operation. Luminance - the photometric quantity most closely associated with the perception of brightness, measured in units of luminous intensity (candelas) per unit area (feet squared or meters squared). Luminaire efficiency - the ratio of the light emitted by luminaire to the light emitted by the lamp or lamps within it. Components of a luminaire, such as reflectors and diffusers, absorb some of the light from the lamps(s). A highly efficient luminaire emits most of the light that the lamp(s) emits. Metal halide (MH) - a high-intensity discharge lamp type that uses mercury and several halide additives as light-producing elements. Open-circuit voltage - the voltage applied across the output terminals of a ballast when no load is connected. This is the voltage applied across a lamp circuit to start a lamp. After starting, the voltage rapidly decreases and stabilizes at the operating voltage. Preheat - a method of starting fluorescent lamps in which the electrodes are heated before a switch opens to allow a starting voltage to be applied across the lamp. With preheat starting, the lamp flashes on and off for a few seconds before staying lit. Power factor - a measure of how effectively a ballast converts current and voltage into usable power to operate the lamps. A power factor of 0.9 or greater indicates a high power-factor ballast. Prismatic lens - an optical component of a luminaire that is used to distribute the emitted light. It is usually a sheet of plastic with a pattern of pyramid-shaped refracting prisms on one side. Most ceiling mounted luminaries in commercial buildings use prismatic lenses. Rapid-start - a method of starting fluorescent lamps in which the ballast supplies voltage to heat the lamp electrodes for one to two seconds prior to starting and, in most cases, during lamp operation. A rapid-start system starts smoothly, without flashing. Reflected glare - often called veiling reflections, glare that results from light shining off polished or glossy surfaces. Restrike time - the time required for a lamp to restrike, or start, after the lamp is extinguished. Normally, HID lamps need to cool before they can be restarted. Visual comfort probability (VCP) - a system for estimating discomfort glare that predicts the percentage of people who are likely to find the lighting comfortable, against the percentage that find it uncomfortable. Wire Whip - Typically 14 Ga. 3-wire or 5-wire insulated solid wire leads with a 1/2 exposed for installation (non-corded). LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 73

LIGHTING FUNDAMENTALS FUNDAMENTALS CLASS: Defines the type of explosive or ignitable substances which are present in the atmosphere. Class I, Gas or Vapor (NEC Article 500-5, 5001-9) Areas where inflammable gases or vapors may be present in sufficient quantities to produce an explosive or flammable mixture. Class II, Dust (NEC Article 500-6, 502-11) Areas where combustible dusts are present in sufficient quantities to produce a hazardous environment. Class III, Fiber (NEC Article 500-7, 503-9) Areas where ignitable fibers or flyings are present in sufficient quantities to produce ignitable mixtures. DIVISION: Defines the likelihood of the hazardous material being present in a flammable concentration. Division 1, Always Present (NEC Article 500-5a, 500-6a, 500-7a, 502-11a) Areas where the hazardous condition is normally present, either continuously or periodically. Division 2, Not Normally Present (NEC Article 500-5b, 500-6b, 500-7b, 500-9b, 502-11b) Areas where the hazardous condition is present due to accidental rupture, release, breakage, or unusual faulty operation of a closed container or system. GROUPS: Defines further the type of hazardous material. (NEC Article 500-2, 500-3) Class I Class II Group A - Acetylene Group E - Metal Dust Group B- Hydrogen Group F - Coal Dust Group C - Ether Group G - Grain Dust Group D - Gasoline ZONAL CLASSIFICATIONS IEC publication 79-10 defines the guidelines for classifying hazardous area. Instead of using Classes and Divisions, the term Zones is used as defined below. Zone 0 - Is an area in which an explosive gas or vapor is continuously present or present for long periods, typically more than 1,000 hours per year. Generally, most industrial users try to keep all electrical equipment out of the Zone 0 area. The only equipment approved is intrinsically safe equipment. Zone 1 - Is an area in which an explosive gas atmosphere is likely to occur in normal conditions for more than 10 hours per year and less than 1,000 hours per year. Zone 2 - Is defined as an area in which explosive gas or vapor atmospheres are not likely to occur and if it does, it is only for a short period of time, typicaly less than 10 hours per year. Zone 20 - Is an explosive atmosphere, resulting from dust which is present continuously. Zone 21 - This is defined as an atmosphere where dust is occasionally present. Zone 22 - This is defined as an atmosphere where dust is not normally present. NOTE: Class III locations (fibers & flyings) are covered in Zone 20, 21, & 22. CLASSIFICATION COMPARISONS TEMPERATURE MARKINGS Hazardous Material Gas or Vapor Dust Fibers or Flyings NEC U.S. Standards Class I, Div. 1 Class I, Div. 2 Class II, Div. 1 Class II, Div. 2 Class III, Div. 1 Class III, Div. 2 IEC Euronorm Standards Zone 0 & Zone 1 Zone 2 Zone 20 and Zone 21 Zone 22 Zone 20 and Zone 21 Zone 22 Maximum Surface Temperatures T-Code* Maximum Surface Temperatures T-Code* C F C F 450 840 T1 180 356 T3A 300 572 T2 165 329 T3B 280 536 T2A 160 320 T3C 260 500 T2B 135 275 T4 230 446 T2C 120 248 T4A 215 419 T2D 100 212 T5 200 392 T3 85 185 T6 * Based on 40 C (104 F) ambient For complete information, refer to the National Electric Code (NEC) 74 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

LIGHTING FUNDAMENTALS IP (International Protection) CODE IP Code is a coding system to indicate the degree of protection by an enclosure against access to hazardous parts, ingress of solid objects, ingress of water, and to give additional information in connection with such protection. First Character indicates the degree of protection against the ingress of solid objects. Second Character indicates the degree of protection against the ingress of water with harmful effects. 0 Non-protected 0 Non-protected 1 Protected against solid foreign objects of 50 mm diameter or greater 1 Protected against vertically falling water drops 2 Protected against solid foreign objects of 12.5 mm diameter or greater 2 Protected against vertically falling water drops as the enclosure is tilted 15 3 Protected against solid foreign objects of 2.5 mm diameter or greater 3 Protected against spraying water 4 Protected against solid foreign objects of 1.0 mm diameter or greater 4 Protected against splashing water 5 Dust-protected 5 Protected against water jetting 6 Dust-tight 6 Protected against powerful water jetting 7 Protected against temporary immersion 8 Protected against continuous immersion UL STANDARDS ANSI/IES LATERAL LIGHT DISTRIBUTIONS Number Title 844 Luminaires for Use in Hazardous (Classified) Locations 924 Emergency Lighting and Power Equipment 1598 Luminaires 1598A Supplemental Requirements for Luminaires For Installation on Marine Vessels 8750 LED Equipment Asymmetrical Long and Narrow Asymmetrical Asymmetrical Asymmetrical Symmetrical Forward Throw IES RECOMMENDED LIGHTING LEVELS Task Area Footcandles Task Area Footcandles Paint Booths 100-150 Areas with VDTs 75 Corridors/Stairways/Rest rooms 10-20 Classrooms 50-75 Storage Rooms 10-50 Cafeterias 50 Conference Rooms 20-50 Gymnasiums 30-50 General Offices 50-100 Manufacturing Assembly 50-500 Drafting/Accounting 100-200 Parking Areas (uncovered) 1-2 FUNDAMENTALS LDPI is a registered trademark of LDPI, Inc. LDPI, Inc. 75

WEIGHTS - SHIPPING FUNDAMENTALS SERIES Ave. of Weight Min. Of Weight Max. of Weight LE101 32.7 17.8 55.3 LE121 Call Customer Service LE181 43.9 37 50.75 LE182 50.75 37.5 63 LE155 58.4 50.75 66 LE201 14.2 13.5 14.8 LE202 17.5 15.75 19.75 LE203 11.0 6.8 12.5 LEVP 6.0 5.0 8.0 LE302 26.1 23.8 21 LE384 23.3 29 35 LEHS 14 16.5 19 240 LED 52.8 47.8 58.0 LE401 26.1 23.8 29.8 LEHL 21.0 21.0 21.0 LEHL1 11 11 11 H LED 30.0 27.0 35.0 LEXF 34 34 34 376 11.9 4.5 24.0 240 8FT 106.5 105.0 108.0 384 23.3 0.0 35.0 240 57.8 36.0 108.0 440 2x4 47.0 45.3 48.0 440T/THO 44.2 41.0 47.0 LE151 72.0 39.5 97.0 LE481 50.75 37.5 63 LE482 58.4 50.75 66 Slim Light LED 43.0 32.3 51.5 400 LED 47.0 36.5 55.5 LE551 42 42 42 380 LED 42.0 42.0 42.0 229H 18.8 17.5 22.0 400 45.3 34.5 57.0 400SLB 50.7 43.3 57.0 Slim Light 43.2 42.9 63.0 380 55.9 30.8 85.0 LEINS2 17.0 9.0 23.8 LEINS3 85.8 62.8 115.0 LEINS4 Call Customer Service INS2 16.3 11.8 22.5 INS3 73.0 45.8 110.0 Task Cart Multi Fixture Task Cart Explosion Proof Cart Custom Lighting Call Customer Service Call Customer Service Call Customer Service Call Customer Service 76 LDPI is a registered trademark of LDPI, Inc. LDPI, Inc.

LDPI, Inc. Industrial and Hazardous Lighting www.ldpi-inc.com LPI, Inc. Personnel Lift Systems and Work Platforms www.lpi-inc.com Pro-Cise, Inc. Fabrication & Machining Solutions www.pro-cise.com Badger Industrial Supply and Equipment, LLC Industrial Supplies and Equipment www.badgerie.com Warranty Statement: LDPI, Inc. warrants LED fixtures for 5 years and non LED fixtures for 1 year in accordance with the limited warranty policy that can found on our website at: http://www.ldpi-inc.com/warranty