Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp
|
|
- Sydney Blankenship
- 5 years ago
- Views:
Transcription
1 Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp Part #: HALS-48-4L-LED Made in Texas The Larson Electronics HAL-48-4L-LED Hazardous Area LED Light Fixture is ETL listed Class 1 Division 2 Groups A, B, C and D, UL 1598A listed, has a T4A temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HAL-48-4L-LED light fixture is a 4 foot long, 4 lamp, ETL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent style LED light and a good choice for use in hazardous areas requiring maximum illumination. This fixture is T4A temperature rated, comes standard with four 28 watt LED bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL -48-4L-LED provides operators in hazardous locations with a powerful, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T5-bulbs. The 28 watt LED lamps produce more illumination than standard T5 bulbs, but draw only 1/3rd of the current. The current generation of Larson Electronics LED T-series style bulbs produce 15% more light than our HALS-48-4L-LED fixture outfitted with two T5 bulbs. This fixture is multivoltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our HAL-48-4L-LED LED light fixture is both ETL approved. This unit comes with the following color options: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K and 2700K. Page: 1
2 Standard Surface Mount Brackets: Each surface mounting bracket is attached on each end of the light and allows the operator to adjust the angle of the entire fixture. Pendant and cable mounting options are also available for operators who wish to mount these fixtures away from the ceiling surface. Each is illustrated above beginning left to right; Cable, Adjustable Surface Mount and Pendant. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants. Made in USA Quality 1. Each unit dialectically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices. 3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy. 4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion. 6. 1/2 inch, threaded access hole for wiring conduit. 7. Units can be wired end to end in series. Specifications / Additional Information HAL-48-4L-LED Hazardous Area UL Listing: United States - Canada Dimensions: W-15" L-49 3/4 " H-6 1/8 " Weight: 33 lbs. Total Watts: 112 watts (28 Watts per Lamp) Voltage: Universal 120/277VAC 50/60Hz Total Lumens: 14,000 (3,500 per Lamp) ETL Listed Class 1 Division 2, Groups A, B, C, D Class 2 Division 2, Groups F,G UL 595 Outdoor Marine Type (Saltwater) UL 1598A Marine Type California Title 24 Compliant Made in the USA Lamp Life Expectancy: 50,000 Hours Luminous Efficacy: 125 Lumens per Watt Operating Temp Range: T4A Rated -30 C to 85 C Beam Angle: N/A Special Orders- Requirements Contact us for special requirements Color Temp: 5600K,5000K,4500K,4000K,3500K,3000K,2700K Toll Free: Mounting: Bracket Standard - Pendant/Cable Mount Optional Fax: Wiring Hub: 1/2 inch threaded sales@larsonelectronics.com Scroll Down to Purchase- This product does not qualify for free shipping. Part #: HALS-48-4L-LED (48686) Page: 2
3 Options: HALS-48-4L-LED- VOLTAGE - MOUNT Example: HALS-48-4L-LED-1227-SFC VOLTAGE V AC V AC/DC MOUNT Surface -SFC Pendant -PND Cable -CAB Page: 3
4 Page: 4
5 Page: 5
6 Page: 6
7 Page: 7
8 Links (Click on the below items to view): - SpecSheet French - SpecSheet Arabic - Manual - SpectrumChart Page: 8
48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2
48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2 Part #: HAL-EMG-24-2L-T8-D Page: 1 Made in the USA The Larson Electronics HAL-EMG-24-2L-T8-D Hazardous Area Fluorescent
More information4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2
4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2 Part #: HALS-EMG-48-2L-T8 Made in the USA The Larson Electronics HALS-EMG-48-2L-T8 Hazardous Area Fluorescent
More informationClass 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style V Dimmable
Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style - 0-10V Dimmable Part #: HAL-24-2L-LED-BMSW-D-V2 Page: 1 Made in the USA The Larson Electronics HAL-24-2L-LED-BMSW-D-V2 Hazardous Area
More informationExplosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips
Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips Part #: HAL-EMG-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HAL-EMG-48-2L-LED-D-V2 Hazardous
More informationExplosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4'
Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4' Part #: EPL-EMG-48-2L-T8-D Made in the USA The Larson Electronics EPL-EMG-48-2l-T8-D Explosion Proof Emergency
More informationExplosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps
Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps Part #: EPL-48-2L-T8-VISUVA Page: 1 The Larson Electronics EPL-48-2L-T8-VISUVA Explosion Proof UV/Visible
More informationExplosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1
Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1 Part #: EPL-48-4L-UV Page: 1 Made in the USA The Larson Electronics EPL-48-4L-UV 160 Watt Explosion Proof UV Fluorescent
More informationHazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs
Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Part #: HALP-ANC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ANC-48-2L-LED-D-V2
More information80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup
80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup Part #: HALP-EMG-48-2L-ITG-LED-V2 Page: 1 Made in Texas The Larson Electronics HALP-EMG-48-2L-ITG-LED-V2 Hazardous
More information25W Hazardous Location Integrated LED Light Fixture Lumens - Low Profile - ATEX IEC CSA UL
25W Hazardous Location Integrated LED Light Fixture - 3294 Lumens - Low Profile - ATEX IEC CSA UL Part #: HAL-19-25W-ITG-LED Page: 1 The Larson Electronics HAL-19-25W-ITG-LED 25 Watt Explosion Proof Low
More informationExplosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67
Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67 Part #: EPSLED-80 Page: 1 Made in Texas The EPSLED-80 Explosion Proof LED Strobe Light from Larson Electronics is UL
More information*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts
*RENTAL* Class 1 Division 1 300 Watt Incandescent Light - Explosion Proof - Wall Mount - 120 Volts Part #: RNT-EPL-WM-300W-120V Made in the USA This unit is for rentals. Please scroll down for rental rates
More information26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE
26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE Part #: EPL-LP-12-LED Page: 1 The EPL-LP-12-LED from Larson Electronics is a Low Profile Explosion Proof
More information56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network
56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network Part #: HALP-ADC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ADC-48-2L-LED-D-V2
More information208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC
208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC Part #: EPL-EMGX-LP-2X48-LED Page: 1 The Larson Electronics EPL-EMGX-LP-2X48-LED Low Profile Explosion Proof
More informationHazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2
Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Part #: HAL-SL-5-LED Page: 1 Made in Texas The Larson Electronics HAL-SL-5-LED Explosion Proof LED String
More information56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network
56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network Part #: HALSS-ADC-48-2L-LED-D-V2 Page: 1 Made in the USA The HALSS-ADC-48-2L-LED-D-V2 Hazardous Location LED Fixture
More informationC1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount
C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount Part #: EPL-LED-50W-RT-JB2 Page: 1 The Larson Electronics EPL-LED-50W-RT-JB2 Explosion Proof High Bay light
More informationLow Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E
Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer - 140 - C1D1 - C2D2 - ISO 14644/FS-209E Part #: HALD-24-1X150LED-V2-140DB Page: 1 Made in the USA The HALD-24-1X150LED-V2-140DB from Larson Electronics
More informationExplosion Proof 70 Watt Low Profile LED Light Fixture Lumens - C1D1 Group B - Hydrogen Rated
Explosion Proof 70 Watt Low Profile LED Light Fixture - 6000 Lumens - C1D1 Group B - Hydrogen Rated Part #: EPL-LP-70W-LED-B The Larson Electronics EPL-LP-70W-LED-B Low Profile LED light fixture provides
More informationExplosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1
Explosion Proof Light - 400 Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Part #: EPL-HB-400W-MH Made in the USA The EPL-HB-400W-MH metal halide, hazardous area light fixture from Larson Electronics
More informationC2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens
C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens Part #: EPLC2-HB-50LED-RT Page: 1 The Larson Electronics EPLC2-HB-50LED-RT Explosion Proof High Bay light
More information100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof
100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof Part #: EPLX-HB-100W-RD2-LED-TRC Page: 1 The EPLX-HB-100W-RD2-LED-TRC Explosion Proof Low Bay AC LED light
More informationExplosion Proof LED Light - Equivalent to Watt HID C1D2, UL Listed
Explosion Proof LED Light - Equivalent to 150-175 Watt HID C1D2, UL Listed Part #: EPLC2-LED-175W Page: 1 Made in the USA The Larson Electronics explosion proof LED is designed for use in hazardous work
More information150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam
150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam Part #: EPLC2-HB-155W-LED-PND Page: 1 The Larson Electronics EPLC2-HB-155W-LED-PND Explosion Proof High Bay light
More information50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard
50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard Part #: EPLC2-HHB-GG-150W-LED Page: 1 Made in the USA The Larson Electronics EPLC2-HHB-GG-150W-LED Explosion
More informationExplosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up
Explosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up Part #: EPL-EMG-EXT-3W Page: 1 Made in the USA The EPL-EMG-EXT-3W Explosion Proof LED Exit Sign with back
More information56W Vapor Proof LED Fixture V Dimmable - DALI Network lms - IP67 - Outdoor Applications
56W Vapor Proof LED Fixture - 0-10V Dimmable - DALI Network - 7000 lms - IP67 - Outdoor Applications Part #: GVP-ADC-48-2L-LED-D-V2 Page: 1 The Larson Electronics GVP-ADC-48-2L-LED-D-V2 Dimmable LED Light
More information50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved
50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved Part #: EPLC2-TRN-50LED-RT Page: 1 The Larson Electronics EPLC2-TRN-50LED-RT Explosion Proof compact
More informationClass 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors
Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors Part #: HAL-TL-4X10W-C-PA Made in the USA The HAL-TL-4X10W-C-PA Class 1 Division 2 LED Stack Light with Signal
More information60W Flameproof LED Emergency Linear Fixture V AC - (2) 30W LED Lamps - ATEX/IECEx
60W Flameproof LED Emergency Linear Fixture - 100-250V AC - (2) 30W LED Lamps - ATEX/IECEx Part #: ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V Page: 1 The Larson Electronics ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V
More informationIndustrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved Nanometer
Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved - 365 Nanometer Part #: GAU-HB-100LED-RT-UVA The Larson Electronics GAU-HB-100LED-RT-UVA Industrial Ultraviolet light fixture
More informationExplosion Proof Light - Base Stand Mount - 16 Inch Watt LED - Class I Div 1 C&D
Explosion Proof Light - Base Stand Mount - 16 Inch - 150 Watt LED - Class I Div 1 C&D Part #: EPL-16BS-1X150LED-100 Page: 1 Made in Texas The EPL-16BS-1X150LED-100 Explosion Proof LED Light from Larson
More information25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC
25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame - 120-277V AC Part #: EXHL-TRN-LE1-1227 Page: 1 Made in Texas The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion
More information33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2
33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2 Part #: HAL-48-33W-LED Buy American Compliant The Larson Electronics HAL-48-33W-LED is a low voltage
More information120W Hazardous Location LED Fixture V DC - Modbus TCP/IP - Network Controlled - Dimmable
120W Hazardous Location LED Fixture - 12-24V DC - Modbus TCP/IP - Network Controlled - Dimmable Part #: HAL-ANC-60-120W-ITG-LED-DIMM-1224 Page: 1 The Larson Electronics HAL-ANC-60-120W-ITG-LED-DIMM-1224
More information150W Explosion Proof LED Flood Light - Surface Mount Lumens - C1D V AC
150W Explosion Proof LED Flood Light - Surface Mount - 17500 Lumens - C1D1-120-277V AC Part #: EPL-LED-150W-RT Page: 1 The EPL-LED-150W-RT from Larson Electronics is an Explosion Proof High Bay LED Light
More informationExplosion Proof LED Light - Equivalent to Watt Metal Halide - Class 1 Division 2
Explosion Proof LED Light - Equivalent to 100-150 Watt Metal Halide - Class 1 Division 2 Part #: EPLC2-LED-150W Page: 1 Made in the USA The EPLC2-LED-150W LED hazardous area light fixture from Larson Electronics
More informationApplications. Standard Materials
Mercmaster III Low Profile Compact Fluorescent Luminaires Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures
More informationVaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant Lumens
Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant - 1050 Lumens Part #: VPLED-CRNM-LED10W Page: 1 Made in the USA The VPLED-CRNM-LED10W Vaporproof White LED Light from Larson Electronics
More information300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated
300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated Part #: HALD-48-2X150LED-V2-C-OXM Page: 1 Made in Texas The HALD-48-2X150LED-V2-C-OXM from Larson Electronics
More information100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord
100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord Part #: EPL-PM-100LED-UVA-150-EPP Page: 1 The EPL-PM-100LED-UVA-150-EPP from Larson Electronics is an Explosion
More informationMAR2 LED SERIES M A R 2 L E D. Linear LED Lighting for Hazardous Locations
MAR2 LED SERIES Linear LED Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 1598A Marine Outside Type UL 8750 LED Safety CSA C22.2 #250.0-08; CSA C22.2
More informationEVLPF Series Compact Fluorescent
EVLPF Series Low Profile Hazard Gard Luminaires Cl. I, Div. 1, Groups B (GB Suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (GB Suffix), IIB, IIA Cl. II, Div. 1, Groups E, F, G Class III, Simultaneous Presence
More information150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D
150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D Part #: EPL-24BS-5FT-1X150LED-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-100 Explosion Proof LED
More informationExplosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2
Explosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2 Part #: EPL-SL-5-LED Page: 1 Made in the USA The Larson Electronics EPL-SL-5-LED Explosion Proof String Light set is U.L. approved Class
More information40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated
40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated Part #: HALD-24-1X40CPR-LED-V2 Page: 1 The Larson Electronics HALD-24-1X40CPR-LED-V2 Explosion Proof LED Fixture provides
More information100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch
100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch Part #: EPL-BS-2X70LED-100 Page: 1 The EPL-BS-2X70LED-100 Portable Explosion Proof LED Light from Larson
More informationDimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency
Dimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency Part #: GAU-48-320W-LED-DIMM Page: 1 The Larson Electronics GAU-48-320W-LED-DIMM Dimmable General Use High
More information500 Watt High Mast (Stadium) LED Light - 60,000 Lumens Outdoor Rated
500 Watt High Mast (Stadium) LED Light - 60,000 Lumens - 120-277 - Outdoor Rated Part #: GAU-LTL-400W-LED Page: 1 The GAU-LTL-400W-LED High Mast (Stadium) LED Flood Light offers intense light output and
More information120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones
120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones Part #: EPL-TL-2X60.RD2-C-PA-B Made in the USA The EPL-TL-2X60.RD2-C-PA-B Explosion Proof Signal Light
More informationLMV Series W Low Profile - Medium Base
L LMV Series 50-150W Low Profile - Medium Base Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G;
More informationN2MVF Series Compact Fluorescent
Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence Marine & Wet Locations, R, 4, 4X; IP56 Applications: Champ Luminaires are used: In areas in which ignitable concentrations
More informationLED Light Emitter - 7, 3-Watt CREE LEDs Lumens Volts
LED Light Emitter - 7, 3-Watt CREE LEDs - 1750 Lumens - 9-32 Volts Part #: LEDLB-21-3C Page: 1 Buy American Compliant The Larson Electronics LEDLB-21-3C LED Light Bar offers high light output in a light
More informationIR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam Volts DC - 750/850/940Nm
IR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam - 9-42 Volts DC - 750/850/940Nm Part #: LEDLB-4-IR Buy American Compliant The Larson Electronics LEDLB-4-IR LED Light Bar offers high infrared
More informationCode Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof
Code Master Factory Sealed Strobe Luminaires Lighting Lighting: Explosionproof Visual Signal Applications Code Master Explosionproof Strobe fixtures are designed to provide safe operation in the presence
More information150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D V
150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D - 347-480V Part #: EPL-24BS-5FT-1X150LED-480V-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-480V-100 Explosion
More information300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug
300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug Part #: EPL-QC-16C-3FT-2X150LED-RT-100-EPP Page: 1 The EPL-QC-16C-3FT-2X150LED-RT-100-EPP Portable Explosion
More informationInfrared LED Light - 3 watts - stud mount v - 750nm, 850nm or 940nm
Infrared LED Light - 3 watts - stud mount - 9-42v - 750nm, 850nm or 940nm Part #: LEDLB-1-IR Page: 1 Buy American Compliant The LEDLB-1-IR LED is an ultra compact and powerful medical use suitable infrared
More information480W High Intensity LED Light - 60,000 Lumens V AC - High Mast Lighting - Pole Top Mount
480W High Intensity LED Light - 60,000 Lumens - 120-277V AC - High Mast Lighting - Pole Top Mount Part #: GAU-PT-500LTL-LED Page: 1 The GAU-PT-500LTL-LED High Mast LED Flood Light offers intense light
More informationRating. Class I Div II
TYPE: LED HAZGLOBE : HZ2 LARGE - 26 WATT SPECIFICATIONS. Housing and Lens Frame: Die cast aluminum for thermal management Lens: Tempered Glass Cage: 0.25 dia Wire; 304 stainless steel Finish: TGIC thermoplastic
More informationelevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems.
V Series H.I.D s VG, VN, VZ Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7 < VG > < VN > < VZ > Type of Explosion-proof Fixture Wattage Class I Division 2 Group A,B,C,D Class II Division 1,2 Group
More informationCATALOG NUMBER NAME DESCRIPTION HTL X Keeper 2 40 Watts 120v 5000K 4,000 Lm HTL X Keeper 2 40 Watts 277v 5000K 4,000 Lm 4.
SPECIFICATIONS hazloclinear LIGHTING 120 & 277 Voltage KEY FEATURES Two Models: 120 vac or 277 vac. Die Cast aluminum fixture for LED heat dissipation and thermal control. 40 watts, 4000 lumens, Epistar
More informationHazardous Area LED Lighting Hazard Gard LED Luminaires. Hazard Gard EVLL LED
Hazardous Area LED Lighting Hazard Gard LED Luminaires Hazard Gard EVLL LED Hazard Gard EVLL LED Safe. Reliable. Efficient. Featuring the industry's broadest range of LED luminaires for harsh and hazardous
More informationDMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G; Cl.
More information7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures V AC 1-Phase - Crane Light
7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures - 120-277V AC 1-Phase - Crane Light Part #: SMLP-16X500LTL-LED-1227 Page: 1 Made in Texas The SMLP-16X500LTL-LED-1227 Cube Mount LED Light Plant
More informationTable 500-3(d) Identification Numbers. Maximum Identification
Exit Signs and Emergency Luminaires Hazardous and Non-Hazardous Description Page No. Exit Signs EXL Series 924, 925 EVLPF(B)-EXD 926 DMVF(B)-EXD 927 Light-Pak TM Emergency Lighting Systems ELPS Series
More informationC1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof
C1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof Part #: EPSN-HRN-PA-AT-MOD1 Made in the USA The Larson Electronics EPSN-HRN-PA-AT-MOD1 Explosion Proof Horn provides
More informationIndustrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon
Industrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon Part #: WAL-TL-1XCL1B-C-PA-12V Page: 1 Made in the USA The WAL-TL-1XCL1B-C-PA-12V from Larson Electronics
More informationEVLED201 36W Led Luminaire. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 14.85
80 South Street 7596-726, TX Nacogdoches Phone: 96-569-791 Fax: 96-560-685 EVLED201 6W Led Luminaire Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Long Description
More information160W High Intensity UV LED Light - UVA/365NM V AC - Acrylic Lens
160W High Intensity UV LED Light - UVA/365NM - 120-277V AC - Acrylic Lens Part #: GAU-LTL-UVA-500W-LED Page: 1 The GAU-LTL-UVA-500W-LED UV LED Flood Light offers intense UVA light output for industrial
More informationUL Listed Available with Cl. I, Div. 2, Groups A, B, C, D rating
CCH UX Series LED Exit Signs UL Listed Available with Cl. I, Div. 2, Groups A, B, C, D rating NEMA 4X, IP66 The Cooper Crouse-Hinds CCH UX Series LED Exit Sign combines the strength and durability of die
More informationLED ECO PANEL.
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. LED ECO PANEL www.trulygreensolutions.com
More informationWARRANTY LED ECO PANEL.
LED ECO PANEL www.trulygreensolutions.com 8 MODELS AVAILABLE IN 25W TO 72W EXPECTED LIE OVER 50,000 HRS Compatible Emergency Battery Backup Available eatures 5 YEAR Suitable or Damp Location Use IES ILES
More informationHID lighting for hazardous areas Champ HID floodlighting. Champ floodlights. HID floodlighting for hazardous areas
HID lighting for hazardous areas Champ HID floodlighting Champ floodlights HID floodlighting for hazardous areas Champ HID floodlights Safe. Reliable. Efficient. Featuring the industry's broadest range
More informationChamp VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications Now cul Listed! High-performance,high-brightness Champ VMV LED
More informationFPLHB - Fidelux Premier Linear Highbay
FPLHB - Fidelux Premier Linear Highbay Product Description Fidelux LED Linear High Bays meet the challenging maintenance, safety, and performance requirements of industrial environments through an unbeatable
More informationUTILITY LIGHT INTRODUCTION
KILLARK UTILITY LIGHT INTRODUCTION Class I, Div. 2, Groups A,B,C,D Class l, one 2, Groups llc,llb,lla Class II, Div. 2, Groups F,G Class III Suitable for wet locations Enclosure Type 4 Certified - File
More informationCLM 422 Series LED Ceiling Luminaire Module - 45Watt
Product Information The CLM422 LED Ceiling Luminaire Module is the first truly engineered commercial grade (2'x 2') LED office light designed to replace fluorescent fixtures of much higher wattage classes.
More informationTROFFER RETROFIT KIT (TRK)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TROFFER RETROFIT KIT (TRK) www.trulygreensolutions.com
More informationTUBE ARCHITECTURAL DS-PD05
TUBE ARCHITECTURAL DS-PD05 @" Fixture Type: 2" - 48" 45 + Catalog Number: Project: 6D" 4D" 24" Extension Rod for additional length up to 96" DS-PDX24 Location: Seismic swivel tilts up to 45 to accomodate
More informationEnhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications
Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications High-performance, high-brightness Champ VMV LED luminaire brilliantly
More informationDescription. Applications
CVEP PDS CVEP Convection for Hazardous Heater For Locations Hazardous Locations Convection Heater 1.8 to 9.0kW (T-2A) 280 C (536 F) 1.6 to 4.0kW (T-3A) 180 C (356 F) 1.8 to 9.0kW (T-2) 1.8 300 C to 9.0kW
More informationVaya Linear LP, White & Mono
Vaya Linear LP, White & Mono Vaya Linear LP White & Mono is a reliable and cost effective LED lighting fixture designed for static white or mono colored lighting effects. Vaya Linear LP is ideal for exterior
More informationHIGH BAY APPLICATIONS
STAIRWELLS The IIS Inverter can operate multiple fixtures in a building s stairwell and can be wired to bypass dimmers or occupancy sensors...keeping your egress corridors lit without sacrificing your
More informationProduct Specifications MaxLumen MRI LED Diffused Lighting
NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model MXLumen22-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 2x2 light fixture
More informationCOMPACT SIZE INTRODUCTION & LOGIC
KILLARK COMPACT SIZE INTRODUCTION & LOGIC Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups llc,llb,lla Class II, Div. 1 & 2, Groups E,F,G Class III Suitable for wet locations Marine Rated (US only)
More informationLED ECO PANEL.
our DC qualified products, please consult the DC Qualified Products ist at www.designlights.org/qpl. www.trulygreensolutions.com 8 MODES AVAIABE IN 30W TO 75W EXPECTED IE OVER 50,000 HRS Multiple umen
More informationWARRANTY LED ECO PANEL.
ED ECO PANE www.trulygreensolutions.com ED ECO PANE 7 MODES AVAIABE IN 30W TO 75W EXPECTED IE OVER 50,000 HRS IES IES @ www.trulygreensolutions.com Compatible Emergency Battery Backup Available eatures
More informationDuroSite LED RTO Area Light - UL / CSA. for Indoor and Outdoor Industrial Applications #
DuroSite LED RTO Area Light - UL / CSA for Indoor and Outdoor Industrial Applications # On when it matters most. Products and solutions that protect your business 2 www.dialight.com MDTFWRTOX001_H Features
More information5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54
5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54 Part #: LZRWL-CRN-RED Page: 1 Buy American Compliant The LZRWL-CRN-RED Crane Warning Laser is ideal for overhead
More informationDuroSite LED End-to-End Linear Fixture - UL / CSA for Indoor and Outdoor Industrial Applications
DuroSite LED End-to-End Linear Fixture - UL / CSA for Indoor and Outdoor Industrial Applications On when it matters most. Products and solutions that protect your business 2 Features & Benefits 5 year
More informationLED ECO PANEL.
Not all products are qualified on the DC QP. To view our DC qualified products, please consult the DC Qualified Products ist at www.designlights.org/qpl. ED ECO PANE www.trulygreensolutions.com ED ECO
More informationLED RETROFIT SOLUTIONS
The adoption of LED technology for general illumination systems is considered the attractive choice when compared against traditional linear fluorescent lamps. Engineered Products Company (EPCO) LED RetroFit
More informationLED ECO PANEL.
Not all products are qualified on the DC QP. To view our DC qualified products, please consult the DC Qualified Products ist at www.designlights.org/qpl. ED ECO PANE www.trulygreensolutions.com ED ECO
More informationVAPORGARD Incandescent Luminaires
Cl. I, Div. 2, Groups A, B, C, D (All mounting except stanchion) Wet Locations NEMA 3, 3R L Applications: Vaporgard series incandescent luminaires are used: Indoors or outdoors in industrial locations
More informationChamp-Pak Wall Pack Luminares
Champ-Pak Wall Pack Luminares Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups F, G Cl. III & Simultaneous
More informationT8 Self Ballasted UL & CSA LED TUBE RETROFITS
T8 Self Ballasted UL & CSA LED TUBE RETROFITS Sept. 2011 Part Numbers T8 LED TUBE TECHNICAL SPECIFICATIONS Part Numbers LR-T8-17W-3.2-1200 LR-T8-17W-4.5-1200 LR-T8-17W-6.5-1200 LRT8-23WW-FS2 LRT8-23CW-FS2
More informationProduct Specifications
VLN Product Specifications Nastro LED Garage Light W Nastro LED Garage Light EO-LN- EO-LN-T EO-LN-HV EO-LN-HVT Linear Design System Light Efficacy > LPW Easy Installation & Maintenance IP Five Years Warranty
More informationLumination LED Luminaires
GE Lighting Lumination LED Luminaires Recessed LED Troffer BT Series Refreshing Retrofit New Lumination BT Series Recessed LED Troffers from GE Lighting provide all the advantages of LED lighting at a
More information