JESSBERGER JESSBERGER Electric Fass - und and pneumatic Behälterpumpen Barrel and Container Pumps Edition 11/2008
Electric Barrel and Container Pumps Barrel pumps are lightweight, handy and extremely powerful devices suitable for transferring thin to low viscous, neutral or corrosive liquids. Designed for portable and static use the pumps are particularly suitable for intermittent operation. The state-of-the-art and yet simple technical design assures sound and reliable operation. Because of our modular concept every motor can be combined with every pump tube. JP-125 JP-128 JP-132 JP-160 JP-180 Examples of Liquids H y d ro ch l o ric acid, soda lye, sulphuric acid, fo rmic acid, sal ammoniac, photo deve l o p e r, lime potash, fixing b a ths, acetic acid, phosphoric acid, fruit acids, nitro u s acid, hy d ro f l u o ric acid, bleaching solution, wa te r, lactic acid, boric acid, ch romic acid, soap solutions and a wide va ri ety of other liqu i d s. For flammable liquids and for use in explosive surroundings ex - proof drum pumps with necessary accessories can be supplied. Motor and pump tube require ATEX approval. Technical Datas *All physical values given are maximum values. The capacity of the respective pumps refers to water at 18 C and free flow (without hose barb). The delive ry ra te can be re g u l a ted in accord a n c e w i th yo u r n e e d s. An elect ronic power re g u l a tor is available for this purp o s e as an option (speed cont ro l ). Type Pump tubes made of Delivery rate* Delivery head* Rotor/Impeller Max.Viscosity* Pump tube Ø P u mp tube length Construction Motor Weight Lab pump, lightweight and handy. Suitable for pumping low volumes of acid and alkaline liquids from drums and containers with a narrow neck. Pump tube can also be combined with an air motor or any other JESSBERGER motor., On/off, Thermo-protection Lab pump PP / SS 316Ti 22/30/40 l/min 4 m 200 mpas 25/28/32 PP 28/32 SS 500/700/1.000/1.200 mm seal less 250 W Universalmotor 230 V 50 Hz 2-4 kg L i g h t weight barrel and c o n tainer pump. S u i table for pump i n g fluid, neutral and nonflammable liqu i d s. On/off, JP-160 80 l/min 6 m /12 m 300 mpas 400 W Universalmotor 230 V 50 Hz Lightweight barrel and container pump. Suitable for pumping fluid acids and bases, non-flammable liquids. On/off, JP-180 PP, PVDF, SS 316Ti, Aluminium 150 l/min 8 m / 21 m 41 mm, also available: smaller PP and SS 316Ti pump tubes 700 / 1.000/ 1.200 /1.500 mm or special lengths seal less - SS 316Ti pump tube also with mechanical seal (Ø 41 mm) 600 W Universalmotor Seal less pump tubes All pump tubes will be supplied with a hose connection, a sta i n l e s s steel hose clamp 1 and up to 1.200 mm also w i th a wall hanger at no ex t ra cost s. For different applications depending on the liquids, pump tubes are available in PP, PVDF, SS 316Ti and Aluminium. The pump tubes are connected to the motor via a hand-wheel and can be fitted and removed with a few rotations fast and easy without the need of any special tools. Pump tubes with axial-flow rotor will be used for high delivery rate and low head. Pump tubes with radial-flow impeller are the right choice for low delivery rate with high head. PP PVDF 1 Barrel and Container Pumps
JP- 200 JP- 280 JP- 300 JP- 400 Ex JP- 500 SM Lightweight barrel and container pump. Suitable for pumping fluid acids and bases, non-flammable liquids. Powerful barrel and container pump, solid construction, also for pumping lightly viscous n o n - flammable liqu i d s. Powe rful barrel and container pump, solid const ruction, also for pumping lightly viscous n e u t ral, aggre s s i ve and n o n - flammable liqu i d s. Ex-protected, high power barrel and container pump, solid construction, also for pumping lightly viscous flammable liquids. EC Type Examination Certificate Number: DEMKO O3 ATEX 135563X B a rrel and conta i n e r p u mp, th re e - p h a s e - m oto r w i th planeta ry gear 1:4 fo r longer operation times to p u mp lightly viscous n e u t ral, aggre s s i ve and n o n - flammable liqu i d s. Can be combined with eve ry pump tube. according to IP 54. On/off, On/off, according to IP 54. On/off, EEx de IIA T6, Splashproofing according to IP 54. On/off T h re e - p h a s e - m oto r 3000 rpm with cable te rm i- nal box. H o s e - p roofing accord i n g to IP 5 5. JP-200 JP-280 JP-300 JP-400 JP-500 SM PP, PVDF, SS 316Ti, Aluminium 150 l/min 200 l/min 200 l/min 100 l/min 120 l/min 8 m / 21 m 14 m /28 m 14 m / 28 m 8 m / 20 m 10 m / 22 m 1.000 mpas 1.000 mpas 41 mm, also available: smaller PP and SS 316Ti pump tubes 700 / 1.000/ 1.200 /1.500 mm or special lengths 500 W Universalmotor seal less - SS 316Ti pump tube also with mechanical seal (Ø 41 mm) 825 W Universalmotor 825 W Universalmotor 550 W Ex 230 V 50 Hz 0,37 kw or 0,55 kw three-phase-motor 230/400 V 50 Hz 12-15 kg 12-15 kg SS 316Ti ALU Mixing pump tube with double-function pumping and mixing. Seal less pump tubes made of PP with pump tube Ø 50 mm and pump tube lengths of 1.000 mm for 200-Liter-drums and 1.200 mm for containers are available. SS mixing pump tube is certified confirm to ATEX. Mixing pump tube For pumping flammable liquids or to be used in explosion hazardous areas it is only allowed to use approved stainless-steel pump tube. 2 Barrel and Container Pumps
Pneumatic Barrel and Container Pump s are lightweight, handy and extremely powerful devices suitable for use with nearly all fluid and medium viscous liquids. Their state-of-the-art and yet simple technical design assures sound and reliable operation. Because of our modular concept every motor can be combined with every pump tube. Designed for portable and static use, the pumps are particularly suitable for intermittent operation. Those pumps fitted with compressed air motors and stainless steel pump tubes provide a particulary high level of safety when pumping or filling lightly flammable liquids of various danger classes from one container to another. For pump tubes, examples of liquids and electric drum and container pumps see page 1 and 2. Technical Datas Type Pump tubes made of Delivery rate* Delivery head Rotor/Impeller Max.Viscosity* Pump tube Ø P u mp tube length Construction Motor JP - AIR1 Lightweight, handy barrel and container pump suitable for pumping fluid media. EC Type Examination Certificate Number IBEx U05 ATEX B007 X JP-AIR 1 compressed air motor with brass ball valve for compressed air control. This regulates the motor speed and varies the pumping capacity. JP - AIR 1 90 l/min 10 m / 24 m 400 mpas JP- AIR 2 PP, PVDF, SS 316 Ti, Aluminium 120 l/min 10 m / 27 m 41 mm JP-AIR 3 120 l/min 10 m / 27 m 700 / 1.000 / 1.200 / 1.500 mm or special lenghts seal less - SS 316Ti also available with mechanical seal 300 Watt at max. 6 bar operating pressure JP - AIR 2 JP- AIR 3 Lightweight, handy barrel and container pump suitable for pumping fluid and lightly viscous media. An ATEX version with 600 W is also available. J P-AIR 2 c o mp ressed air moto r w i th sta rting button on the handle. The moto r sta rts running and th e p u mp is tra n s fe rri n g l i quids when the button is p re s s e d. 700 Watt at max. 6 bar operating pressure Handy, powerful barrel and container pump suitable for pumping fluid and lightly viscous media. EC Type Examination Certificate Number IBEx U05 ATEX B007 X JP-AIR 3 compressed air motor, stainless steel housing, with plug valve at air intake for compressed air control. This regulates the motor speed and varies the pumping capacity. 400 Watt at max. 6 bar operating pressure Weight 3-5 kg 3-5 kg 4-6 kg *All physical values given are maximum values. The capacity of the respective pumps relates to water at 18 C and free flow (without hose barb). For pumping flammable liquids or to be used in explosion hazardous areas it is only allowed to use approved stainless-steel pump tubes. 4 Barrel and Container Pumps
Eccentric Screw Pumps JP - 700 SR JP -700 DR E JP - 700 DR A Accessories Nozzle, brass nickel plated, Teflon seal, rotating joint Order-No.9042 Ideally suitable for filling and transferring liquids also in the food and pharmaceutical industry. Order-No.9042 Working pressure: max. 4 bar* Viscosity: 750 mpas* Flow ra te: max. 80 l/min.* Liquid temperature: max. 80 C* Weight: 1,4 kg Hose connection: 1 or 5/4 Order-No.9017 Nozzle Polypropylene Order-No.9017 Powerful high viscosity pump for permanent operation. For pumping highly viscous to fluid substances such as paint, varnish, oil, soap, latex-based paint, glue, cream, paste, gel, chowashing liquids, fruit colate mass, honey, etc. juice, jam, etc. Versatile, solidly built and powerful eccentric screw pump for fluid to highly viscous media such as Driven by three-phase motors with 0.37/0.55/0.75 or 1.1 kw at 700 rpm or 900 rpm. With pump hanger, flexible or rigid coupling. Driven by compressed air motors JP-AIR 4 (0.5 kw) 6 (1.0 kw) 8 (1.5 kw). With pump hanger, flexible or rigid coupling. Universal, solidly built, handy and powerful pump. For fluid to viscous liquids such as Driven by universal motor, JP-280 or compressed air motors JPAIR 2 and JP-AIR 3. Pump tube with planetary gear (15:1). JP -700 SR sediment, pastes, soap, shampoo, honey, syrup, jam, ketchup, etc. JP -700 DR E JP - 700 DR A SS 316Ti 12 / 25 / 50 l /min*2 60 m (single stage) / 120 m (double stage) 20.000 mpas 100.000 mpas 100.000 mpas 54 mm Mechanical seal or gland 0.37-2.2 kw 15-30 kg Strainer of Polypropylene Order-No.9011 Strainer of stainless steel 1.4571 Order-No.9012 Recommended when pumping dirty or contaminated liquids with abrasive particles. Barrel adaptors PP Ø 41mm, Order-No.9001 Ø 32mm, Order-No.9080 Barrel adapto rs stainless steel Ø 41 mm, Order-No.9002 Ø 32 mm, Order-No.9081 Emission proof drum adapter PP Order-No.9024, Brass Order-No.9025, SS 316Ti Order-No.9 0 2 6 Order-No.9011 Order-No.9012 Order-No.9001 Order-No.9002 Order-No.9080 Order-No.9081 Order-No.9024 Order-No.9025 Order-No.9026 Order-No.9004 Order-No.9003 The adapter prevents emission of harmful gases and vapours out of the drum. Stainless steel hose clamp Order-No.9 0 04 Order-No.9005 Order-No.9006 Safety clamp Order-No.9 0 0 5 0.5-1.5 kw Stator: NBR, NBR light, Hypalon, Viton, EPDM, PTFE 6-14 kg Working pressure: max. 2 bar* Viscosiy: 750 mpas* Flow rate: max. 100 l/min.* Liquid temperature: max.50 C* Hose connection: 3/4 or 1 Weight: 0,26 kg Bonding, ground set Order-No.9003 700 / 1.000 /1.200 mm or special lengths up to 2.000 mm f.e. 825 W Housing and internal pieces in black polypropylene PP, valve seats and o- rings are in Viton (FPM), spring in Titanium. 15-25 kg for attaching the pump to open containers. Wall bracket Order-No.9 0 0 6 This wall bracket is recommended for pump storage. Proper storage will increase the life expectancy of your pump and motor. Electronic flowmeter Order-No.9 0 2 0 Design, form and colour modifications reserved. Housing made of Polypropylene. * Higher flow rates or also horizon*2 tal versions or dosing pumps can *2 be offered on request. 2 Other materials: POM, PVDF or *All physical values given are maximum values. stainless steel. O ption: Volume The capacity refers to water at 18 C and free flow. pre-set, impuls output for furtdesign, form and colour modifications reserved. her data processing. 5 Barrel and Container Pumps Order-No.9020 Please ask for detailed information!
Further scope of supply Compressed Air- Operated Diaphragm Pumps JP - 800 Electric and pneumatic drum and container pumps JESSBERGER pumps are suitable for nearly all areas of use. They are capable of pumping aggressive and flammable substances, highly viscous liquids also with solids or fibre particles and media containing gas. JESSBERGER Pump technology with internal and external cooled motors in different flow capacity ranges. Seal - less pump tubes in Polypropylene, PVDF, ALU and stainless steel. Tube lengths 700, 1.000, 1.200, 1.500 and 1.800 mm. Also in special lengths up to 3.000 mm. Please ask us. Seal - Less Magnetic Driven Pumps Available in various sizes, state - of - the - art construction, seal - less and environmentally friendly, suitable for a variety of uses, low noise level, long life, easy to maintain. High viscosity pumps JP -700 for drums and containers are suitable for the use of a big number of liquids. Particularly suitable for highly viscous, neutral, aggressive liquids also with or without solids up to 100.000 mpas. Vertical Centrifugal Pumps SERIE JP- 820 executed in Polypropylene and PVDF All pump parts are in stainless- steel, stators are available in NBR, NBR light, Vi ton, Hypalon, EPDM or PTFE. Horizontal Centrifugal Pumps SERIE JP- 840 executed in Polypropylene and PVDF Dosing pumps for viscous liquids for fluid, viscose, aggressive, neutral media with or without solids or fibres particles. Mixers for drums and containers Horizontal Eccentric Screw Pumps JESSBERGER offers solutions for almost every mixing application for drums and containers. are suitable for liquids with low or high viscosity, whether neutral or aggressive, with or without solids or fibres particles. Hand - barrel pumps are lightweight, powerful pumps for almost any fluid liquids. JP- 02 JP- 03 Telescopic suction tube of PP, 340-900 mm J P-02 for Ac i d s, Alkaline Solutions and water based Chemicals. J P-03 for Oil, Diesel, Alcohol (max. 50%), Anti freeze l i quid, Soap solutions, Shampoo, Water, etc. JP- 04 Telescopic suction tube of PP, 480-950 mm, for fluid liquids. Suitable particularly for acids and lyes. JP- 05 Pump tube INOX, 700-1000 mm, for highly fluid to oily liquids. Suitable particularly for flammable liquids and solvents. Electronic Flowmeter Nr. 9020 Housing made of PP. Volume pre-set, Signal-check for further data processing as an option. For other materials please ask us. Please contact: 6 Barrel and Container Pumps Electric Diesel - and fuel oil pumps are intended mainly for the refueling of agricultural machines, tractors, machines for construction work, truck, motorboats and all vehicles w i th diesel or light fuel (hazard class A III) engines. protank 25 protank 50 mobil stationary The following hoses can be supplied: Universal - and special hoses for chemical substances, PVC - hoses, PTFE - hoses, hoses for mineral oil and solvents, tissue- reinforced or electrically conductive. Please ask for details. Please ask for detailed information about the individual product groups of the JESSBERGER delivery program. Please make a cross below the requested figure and email or fax this page to us with your address. JESSBERGER GmbH Jaegerweg 5 D-85521 Ottobrunn Telefon: +49 ( 0)89 66 66 33 400 Fax: +49 ( 0)89 66 66 33 411 e - mail: info@jesspumpen.de inte rn et: www.jesspumpen.de