ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL Verification Services Inc. 1559 King Street Enfield, CT 06082 www.ul.com/consumer-products Point of Contact: Arthur Rumpf Email: Arthur.l.rumpf@ul.com Phone: 860-835- 2094 ING Valid to: September 18, 2016 Certificate Number: AT - 1344 FIELD OF Packaging Label Inspection ASTM F963-11 19 CFR 134.11 EN71-1 Caliper Small Objects ASTM F963-11, Section 4.6; EN 71-1, Section 8.2; 16 CFR 1501 CPSC Small Parts Cylinder Accessible Edges Projections Accessible Points Flexure Test, Wires or Rods Nails and Fasteners Folding Mechanisms and Hinges Cords, Straps and Elastics Section 4.7; EN 71-1, Sections 4.7, 7.6, 8.11; 16CFR1500.49 Section 4.8 Sect. 4.9; EN 71-1, Sections 4.8, 5.1, 7.6, 8.12; 16 CFR 1500.49 Sections 4.10 Sections 4.11 Sections 4.13 Section 4.14 (with the exception of 4.14.4) Sharp-Edge Tester Visual Observation Sharp-point Tester Vise Shields, Fixture Tester Visual Observation Scale, Timer, Rods (1, 2 & 5) lb Weights, Head Probe, Tape Measure, Calipers Stability and Overload Requirements Sections 4.15 Angle Indicator, Scale, Tape Measure, Rador Speed Gun Version 015 Issued: 08/14/2014 Page 1 of 8
Confined Spaces Wheels, Tires and Axles Section 4.16 Section 4.17 Tape Measure, Force Gauge 17025 Calibrated Use and Abuse Equipment Holes, Clearance and Accessibility Section 4.18 PIN Gauges, Rods, Children s Products Simulated Protective Devices Pacifiers Projectile Section 4.19 Sections 4.20.1 & 4.20. 2 (with the exception of Nitrosamine test) 16 CFR 1511 Section 4.21 17025 Calibrated Use and Abuse Equipment Pacifier Test Fixture Force Gauge Calipers Compression Disk Velocity Test Unit, Balance Teethers and Teething Section 4.22 Rattle Fixture Supplemental Fixtures Rattles Section 4.23; 16 CFR 1510 Rattle Fixture Supplemental Fixtures Squeeze Battery-Operated Section 4.24 Section 4.25.1 thru 4.25.9 Rattle Fixture Supplemental Fixtures Calipers, Multi-Meter, Small Parts Cylinder Intended to be Attached to a Crib or Playpen Section 4.26 Instruction review, Reference Section 4.14 Balls Pompoms Hemispheric-Shaped Objects Magnets Section 4.34; EN 71-1, Sections 4.22, 5.10, 7.18, 8.32 Sections 4.35 Section 4.36 Section 4.38 Small Ball Fixture Small Ball Fixture Torque Gauge Force Gauge Calipers, Protractor DC Field Gauss Meter, Tape Measure, Calipers Version 015 Issued: 08/14/2014 Page 2 of 8
Jaw Entrapment in Handles and Steering Wheels Impact / Drop Test Section 4.39 Section 8.7.1 16 CFR 1500.50 thru 16 CFR 1500.53 Blocks (2) Specific tile per Federal Specification SS-T-312B Large, Bulky Tip Over Test Section 8.7.2 Scale Wheeled Tumble Test Section 8.7.3 Stair Assembly that Cover the Face Impact Test Section 8.7.4 5/8 Steel Ball Torque Tests for Removal of Components Tension Test for Removal of Components Section 8.8 EN 71-1, Section 8.3 16 CFR 1500.50 thru 53 Section 8.9 EN 71-1, Section 8.4 16 CFR 1500.50 thru 53 Torque Gauge Force Gauge Bite Test 16 CFR 1500.50 thru 16 CFR 1500.53 Force Gauge Bite Fixture Stuffed and Beanbag-Type Tension Test for Seams Sections 4.27 Force Gauge & Seam Clamp Compression Test Section 8.10 EN 71-1, Section 8.8 Force Gauge Impact EN 71-1, Section 8.7 1 kg (2.2 lb) Weight Drop EN 71-1, Section 8.5 Steel Plate / Coating A Shore Hardness per EN ISO 868 or ISO 7619-2 Shape and Size of certain EN 71-1, Sections 5.8 & 8.16 Rattle test fixture Template A " Materials EN 71-1, Section 4.1 & Annex A.3 Visual Version 015 Issued: 08/14/2014 Page 3 of 8
Assembly Play Figures Toy Chests Washable Flammability Flammability of Dimensional Changes of Fabrics after Home Laundering EN 71-1 Section 4.2 & Annex A.4 EN 71-1 Sections 5.11 & 8.33 ASTM F 963-07e1, Sections 4.27, 6.2 & 7.2; ASTM F834 Section 8.5.1 EN 71-2, Section.4.1 (Excluding flammable liquids, gases and solids.) AATCC 135 Visual Supplemental Test fixture B Protractor, Tape Measure, PIN Gauges Ballast Scale: Detector T-10 Washing Machines: Kenmore 70 & 80 series, Ultimate Care II Dryers: Kenmore 70 series, 80 series, Quiet Pak II Digital Thermometer & 2 Probes Fume Hoods Ballast Scale: Detector T-10 Dryers: Kenmore 70 series, 80 series, Quiet Pak II Digital Thermometer & Probes Test Method for Mass Per Unit Area (Weight) of Fabric ASTM D 3776 Analytical Balance Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab) ASTM D 5034 Machine Dimensional Changes of Garments after Home Laundering AATCC 150 Ballast Scale: Detector T-10 Washing Machines: Kenmore 70 & 80 series, Ultimate Care II Dryers: Kenmore 70 series, 80 series, Quiet Pak II Digital Thermometer & 2 Probes Colorfastness to Crocking AATCC 8 Crockmeter AATCC Gray Scale Analytical Balance Macbeth Spectralight SPL-75B Colorfastness to Perspiration AATCC 15 Perspiration Tester AATCC Gray Scale Colorfastness to Drycleaning AATCC 132 All Textiles Version 015 Issued: 08/14/2014 Page 4 of 8
Colorfastness to Sea Water AATCC 106 Perspiration Tester, Oven, Balance, AATCC Gray Scale Colorfastness to Water AATCC 107 Perspiration Tester AATCC Gray Scale Colorfastness to Chlorine Bleach: Spot Test STR TP 0080 AATCC Gray Scales Macbeth Spectralight SPL-75B Colorfastness to Non- Chlorine Bleach: Spot Test STR TP 0130 AATCC Gray Scales Macbeth Spectralight SPL-75B Colorfastness to Laundering, Home and Commercial: Accelerated AATCC 61 Launderometer: Atlas Electrical Devices LEF Balance: Mettler BB1220 Macbeth Spectralight SPL-75B AATCC Gray Scale Vulcanized Rubber and Thermoplastic Tensile Properties ASTM D 412 Machine: to 20 000 lb Plastics Tensile Properties ASTM D 638; ISO 527-1 and 527-2 Machine: to 20 000 lb Plastics Flexural Properties ASTM D 790 (3-point); ISO 178 (3 point) Machine: to 20 000 lb Plastics Density and Specific Gravity (Relative Density) ASTM D 792 (Method A) ISO 1183 (Method A) Mettler Balance Plastics Melt Flow Rates ASTM D 1238 (Procedure A) Tinius Olsen Extrusion Plastometer Plastics Tensile Properties of Thin Plastic Sheeting ASTM D 882 Machine: to 20 000 lb Plastics Brittleness temperature ASTM D 746 Brittleness Tester Version 015 Issued: 08/14/2014 Page 5 of 8
MATERIALS OR Surface Coatings, Plastics, Polymeric Materials, Metal and Metal Alloys, Ceramic, Glass and Silicate Materials Children s Products Containing Lead, Children s Metal Jewelry Ceramic, Glass and Silicate Materials STANDARD METHOD OR STR TP 0165 and 0166 RoHS Directives Total Lead, Cadmium, 16 CFR 1303 (CPSC- CH-E1003-09 or Chromium, and Mercury CPSC- CH-E1003-09-1) CPSC- CH- E1002-08 Total Lead Total Lead, Cadmium, Chromium, and Mercury CPSC-CH-E1001-08 STR TP 0179 STR TP 0167 RoHS Directives Surface Coating Materials Soluble Test for Metals Section 4.3.5.1 (2), EN71-3 Toy Substrate Materials Test for Metals Section 4.3.5.2, EN71-3, Child Care Items Determination of Phthalates CPSC-CH-C1001-09.3 GC-MS Flammability Flammability of Clothing Textiles 16 CFR 1610 ASTM D 1230 45 Angle Flame Tester Flammability Flammability Plastic Materials Flammability of Children s sleepwear (Fabric or non-tight fitting garments) Flammability of Plastic Materials for Parts in Devices in Appliances 16 CFR 1615 / 1616 Vertical Flame tester UL94, horizontal UL94, 20 mm vertical UL94, 125 mm vertical UL94, VTM UL94, Foamed Material, horizontal UL Certified Fume Hoods Tenma Multimeter Millimeter Micrometer Gas Flow Meters Dimensional Packaging Thickness ASTM F963-11, Section 4.12, EN71-1 Sections 4.3, 5.3, 6, 8.25 Dial Thickness Gauge, Thickness Gauge Plastic Materials Dielectric Strength ASTM D149 Phenix DS Tester Timer Version 015 Issued: 08/14/2014 Page 6 of 8
MATERIALS OR STANDARD METHOD OR Plastic Materials Izod Impact ASTM D256 (Except method D) ISO 180 Pendulum-type Impact Tester Notch cutter Plastic Materials Durometer Hardness ASTM D2240, Type A and Type D Durometer Hardness Tester Rubber, Flexible Polymers and Rubber Coated Fabrics Brittleness temperature ASTM D 2137 Brittleness Tester Plastics Deflection Temperature of Plastics ASTM D 648 ISO 75-1 and 75-2 Heat Deflection Tester Beds Bunk beds Beds Toddler beds ASTM F1427 excluding sections 4.9 & 5.7; 16CFR1513, 16CFR1213 ASTM F1821 16CFR 1217 Calipers, tape measures, weights, balance Calipers, tape measures, weights, balance Labels Label Adhesion ASTM D3359 Ruler, Cutting Tool Plastics and Electrical Insulating Materials Tensile Impact ASTM D 1822 Pendulum Apparatus Plastics and Electrical Insulating Materials Rockwell Hardness ASTM D 785 Rockwell Hardness Tester Bursting Strength ASTM D 6797 Tensile Tester w/ Ball Burst Attachment Absorbency of Textiles AATCC 79 Timer, Embroidery Hoop, Burette or Medicine Dropper Paint Layers, Coatings, Substrates Lead 16 CFR Part 1303 (ASTM F2853-10) HD-XRF Liquids and Solids Flash Point - Closed Cup ASTM D93; ISO 2719; IP 34; DIN 51758; FTM 791-1102; AASHTO T73-811; or 16 CFR 1500.43a Pensky-Martens Closed Cup Tester Version 015 Issued: 08/14/2014 Page 7 of 8
MATERIALS OR STANDARD METHOD OR Certain with Spherical Ends ASTM F963-11, Section 4.32 Test Fixture Jewelry Gravimetric Assay for Gold (Au) Silver (Ag) SOP# 3819 (ASTM E1335-4b Modified) Analytical Balance Accoustics Sound Producing ASTM F963-11, Section 4.5 Sound Level Meter Notes: 1. * = As Applicable 2. This scope is part of and must be included with the Certificate of Accreditation No. AT 1344. Vice President Version 015 Issued: 08/14/2014 Page 8 of 8