all-mounted air heaters for outdoor installation for ducted outdoor installation wall-mounted air heaters have been specifically designed and certified for outdoor installation. he units are equipped with centrifugal fans and electrical components specifically designed for outdoor use. f regulations in force do not permit installation inside the area to be heated - because of the activities performed in the area or the nature of the materials contained therein - units can be installed on the outside close to the wall of the building. epending on how applicable regulations classify the activities performed in the area where the air heaters are to be used, several different system set-ups are possible such as the use of fire barrier air locks, recirculation of inside air, total outside air intake, filtration, mixing, etc. hese solutions can be achieved by using the accessories available on request. air heaters are equipped with a connector for the delivery duct (*), a connector for the air intake duct complete with grate (**), a fume exhaust kit, and a combustion air intake kit. he standard electronic control panel is connected to the unit through a 10 m cable. t makes the unit easy to use and lets you safely control operating and environmental parameters. he unit provides the following functions: - heating / off / summer ventilation - digital display showing environmental temperature or temperature setting - electronic timer for turning fans on and off - reset button - desired temperature setting - on and lockout warning lights - two-stage temperature to be set in automatic or manual mode 44 - + odel 35 for ducted outdoor installation with centrifugal fan 57 for ducted outdoor installation with centrifugal fan 85 for ducted outdoor installation with centrifugal fan code 30200 code 30300 code 30390000 nominal thermal power k kcal/h 34.8 29,900 57.0 49,000 85.0 73, thermal power k kcal/h 31.9 27, 51.6 44,380 75.6 65,050 2.0.00 3.820.00 5.800.00 (*) onnector for delivery duct: code 30192200 ( 35 ) value 135.00 code 30292200 ( 57 ) value 149.00 code 30392200 ( 85 ) value 211.00 (**) onnector for intake duct complete with filter: code 30242250 ( 35 ) value 190.00 code 30342250 ( 57 ) value 289.00 code 30392250 ( 85 ) value 380.00 mm approved for outdoor installation egree of casing protection 44 ive-year warranty (combustion chamber, burner and heat exchanger) mod. 35-57 85 1.386 1.345 102 ir heaters come equipped with: - connector for delivery duct - horizontal air intake duct - inclined air intake duct complete with grate - fume exhaust kit - combustion air intake kit - remote control panel complete with sheath and electric cable (length 10 m) - 21 -
odel 35 695 1.386 76 398 415 283 470 440 695 685 120 470 160 472 ir 187 umes Ø 80 305 as odel 57 1.147 1.035 937 415 475 187 922 255 136 665 81 290 440 684 ir as umes Ø 80-22 -
odel 85 1.7 1.345 870 102 1.450 0 545 160 1.360 255 715 665 424 1.133 900 136 ir 353 umes Ø 515 as xamples of installations ire barrier air lock (if required) nvironment air intake (if recirculation is permitted) ide view of 35 installation with free air delivery into the environment, fire barrier air lock, grate with double row of adjustable fins, total outside air intake designed to accept filter, and exhaust duct extended with duct complete with clamp and gasket. nstallation carried out by using the following accessories: - fire barrier air lock 120 - air delivery grate with double row of adjustable fins - air intake filter - support shelf ide view of 57 roof installation ( ) with ducted air delivery, fire barrier air lock and vibration damper. ucted inside and outside air intake with calibration air lock (*). (*) in order to connect intake duct to standard duct "", the grate should be disassembled. he grate can be used for environment air intake. nstallation carried out by using the following accessories: - fire barrier air lock 120 - vibration damper nstallation of unit with air intake from heated environment - 23 -
ccessories 35 code 30172210 57 code 30322210 85 code 30372210 35 code 30172230 57 code 30322230 85 code 30372230 35 code 30172205 57 code 30322205 85 code 30372205 air delivery grate with double row of adjustable fins 145.00 223.00 357.00 vibration damper for ducting 114.00 171.00 197.00 fire barrier air lock 120 for insertion in ducts 512.00 620.00 724.00 duct m 1 Ø 80 code 37800035 Ø code 37800050 elbow 90 Ø 80 code 37800030 Ø code 37800031 elbow 45 Ø 80 code 37800032 Ø code 37800034 elbow with condensate drain Ø 80 code 37800037 Ø code 37800039 ducts and elbows to extend the exhaust kit (Ø 80 35) (Ø 57 85) 52.00 52.00 plug for fume uptake hole code 30170057 7.00 support shelves code 30290 73.00 35 code 30175610 57 code 30325610 85 code 30375610 air intake filter 37.00 62.00 perforated polyethylene pipe Ø mm length 25 m when ordering the pipe for 85 specify 2 openings code 10152205 197.00 thermostat switch to regulate minimum centrifugal fan speed according to outside air temperature 35 85 code 30242010 52.00 35 code 30170065 57 code 30320065 (2 openings) cod. 30370065 circular connection opening for air delivery polyethylene duct 176.00 236.00 300.00-24 -
escription 35 57 85 as flow ethane 20 m 3 /h 3.70 6.03 9.00 min-max utane 30 kg/h 2.76 4.49 6.70 (15-1.013 ) ropane 31 kg/h 2.71 4.42 6.60 as pressure 20 p 20 12.0 10.5 11.0 at urner 30 p 28-30 27.4 24.2 25.0 (15-1.013 ) 31 p 37 36.0 32.5 32.5 iameter 20 mm/ 350 370 of nozzles 30/31 mm/ 210 220 240 iameter of gas inlet iameter of air inlet mm 1/2 140 iameter of fume flue ower supply mm 80 230 ~/1/50/ z ir flow m 3 /h 2.500 5.000 7.300 rpm n 930 930 950 entilation ffective press. a hermal head 37 31 31 oise level (a 5 m) egree of casing protection db().5 44 51.5 53 ominal electrical power* 850 1.650 2.500 use 6.3 10 15 et weight kg 73 125 207-25 -