Nairobi Funeral Home and Forensics PLUMBING, DRAINAGE, FIRE FIGHTING AND SOLAR WATER HEATING BILLS OF QUANTITIES

Nairobi Funeral Home and Forensics PLUMBING, DRAINAGE, FIRE FIGHTING AND SOLAR WATER HEATING BILLS OF QUANTITIES 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK BILL NO. 1 - MAIN MORTUARY BLOCK GROUND FLOOR Item Description Qnty Unit Rate (Kshs) Amount (Kshs) SANITARY FITTINGS Supply, deliver, install, test and fix the following sanitary fittings including all materials and jointings to supply, waste/soil overflow pipes.twyfords Ltd products are specified only as an indication of quality. Equal and approved appliances may be supplied. Where trade names are mentioned, the Ref. No. is intended only as a guide to the type and quality of fittings. 1.01 Water Closet (WC) Suite Close coupled water closet suite in approved colour complete with horizontal outlet to BS 3402 with 7.5 litre valveless ceramic cistern and fittings including siphon, 15mm diameter bottom inlet ball valve, 20mm diameter side overflow, plastic flush bend, inlet connection, chrome plated lever, ecoflush system with cistern lever and heavy plastic seat and cover with chrome plated hinges. As Tywfords or approved equivalent. 20 No. 1.02 Wash Hand Basins Pedestal Wash hand basin size 510 x 420mm with one tap hole and chain stay hole, 32mm diameter chrome plated pop up chain waste, concealed wall brackets, chrome plated single tap hole mixer as Cobra and chrome plated bottle trap (32mm 'P' trap) with 75mm seal. The wash hand basin to be as Twyfords 'Sola 510' or equal and approved. 19 No. 1.03 Ambulant Disabled Water Closet Suite Low level wash down water closet suite for the elderly and disabled in white complete with horizontal outlet, AND BOTTOM SUPPLY AND OVERFLOW WITH CLOSE COUPLING SIDE LEVER TREATMENT, 7.5 litre cistern, raised heavy duty toilet seat and cover and S-trap outlet and 600X35mm stainless steel grab rails (4 No.) in stainless steel. The set to be complete with wash hand basin, 6mm thick mirror, toilet roll holder and robe hook. All to be as ''Twyfords Avalon BTW'' or approved equivalent. 2 No. 1.04 Urinal Single range urinal bowl in white vitreous china comprising 1No. bowls complete with bowl support complete with push Button urinal Flush Valve, and fittings including chrome plated bottle trap, chrome plated flush pipe and spreader ref SS 6071SS with all connections, wall hangers/supports. To be as Twyfords 'Camden' or approved equivalent. 10 No 1.05 Toilet Roll Holder Toilet Roll Holder in vitreous china to BS 3402 in white colour of size 165X165mm and recessed into wall. Toilet roll holder to be as Twyfords '' SEMI RECESSED & ORNAMENTAL'' accessories Ref. No.VC 9808 WH 20 No. Total Carried to Ground Floor Collection Page BQ 8 BQ 1 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 1.06 Robe Hook Chrome plated robe hook mounted with concealed screws. To be as "Tywfords Spectrum 2000 Accessories" or equal and approved. 20 No 1.07 Mirrors 6mm thick polished plate glass silver backed mirror with bevelled edges, size 610 x 610mm, plugged and screwed to wall with 4No. chrome plated dome capped screws. The mirror shall rest against a layer of 5mm thick foam nest. 19 No. 1.08 Cleaner Sink Heavy duty sink size 455 x 380 x 230mm deep in fireclay complete with hardwood pad on the front edge and fitted bucket aluminium alloy grating and 20mm chrome plated wall mounted inclined bricon tap, chrome plate chain and rubber stopper and heavy gauge 11/2" bottle trap and stainless steel legs. All as "Armitage Shanks Birch" or approved equivalent. 1 No. 1.09 Soap Dispenser Soap dispenser, capacity 1.136 litres complete with plastic rawl plugs, fixing screws, lock and key complete with initial fill of soap gel. The soap dispenser to be as ZAPLON'S MARK 7 model, size 125X100X290mm high or approved equivalent. 10 No. 1.10 Hand Driers Automatic hand drier in white colour, operating on an infra-red automatic sensing system with safety cut-out complete with plastic rawl plugs and fixing screws. The hand drier to have a heating capacity of 1.8kw and to be of size 270x264x143mm deep as HEATRAE SADIA ''Hand Dri'' or approved equivalent. 10 No. 1.11 Medical Wash Hand Basin Counter top Twyfords ''SOLA L.B.G/L'' wash hand basin with no tap holes and chain stay hole cat. No. WB 1520WH, wall brackets cat no. SR 1315xx complete with ''lever action mixer fitting, 1/2 with swivel nozzle and divided flow'' wall mounted mixer cat. no. SF 1099CP, chrome grid waste 11/4'' cat. WF 4341 CP and white plastic bottle trap 11/4'' P-trap cat. no. WF 8482xx or approved equivalent. 2 No. 1.12 Scrub-up Trough Twford Scrub-up Trough 2500mm long with Left hand outlet Cat No. SS9122SS Complete with 3 No. wall mounted Lever action mixer taps Cat No. SF1099CP 11/2 Chrome plated Waste fitting and a S- trap 2 No. Total Carried to Ground Floor Collection Page BQ 8 BQ 2 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 1.13 Sluice Unit Twyfords "Grafton B.P.S" hopper cat. No. FC4076WH loose-trap FC44612WH complete Vitreous china high level cistern 7.5 Litre capacity with valveless fittings and reversible chain pull CX7610WH, cistern supporting brackets SR 1300XX stainless steel flushpipe with spreader and clips SS6020SS Combine bedpan and urinal bottle jet with 1/2'' lever handle taps, SF6504CP legs and bearers for hopper SR3053XX sinks 760mm x455mm FC1350WH chain and waste 11/2'' chrome plated WF4338CP waste pipe for hopper. WF9685WH legs and bearers for sink SR3043XX drain SR3052XX chrome plated extended bib tap1/2'' SF5204CP Chrome plated Lever action mixer tap flexible hose and handspray SF7053CP. 1 No. 1.14 Dhobi Sinks Heavy duty stainless steel sink of size 600x450x285 deep in SWG as manufactured by ASL suitable for mounting on counter complete with 1No. 15mm diameter chrome plated back inlet bib tap cobra ref 107 ECCP, 40mm diameter chrome plated bottle trap and chain waste fitting and plug 2 No. 1.15 Shower Fittings Chrome plated shower mixer fitting 1/2'' with adjustable shower rose at fixed height with concealed pipe work. Complete with hot and cold stop corks and wall fixing brackets. 6 No 1.16 Soap trays Recessed built in soap tray in Vitreous China of size: 165 x 150mm in approved colour as "Tywfords" or equal and approved. 6 No 1.17 Towel Rail Chrome plated 20mm diameter x 600mm long double towel rail and brackets as one piece, plugged and screwed into the wall. The fitting shall be as "Tywfords" or equal and approved. 6 No Total Carried to Ground Floor Collection Page BQ 8 BQ 3 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) Internal Plumbing Works Supply, deliver and install pipes, tubing and fittings as described and shown on the drawings. The pipes shall be PN 25 PPR pipes where exposed to adverse weather condition and all conforming to the current European standards for PPR installations and to the Engineers approval, pipe jointing shall be by polyfusion or use of electric coupling. Rates must allow for all Metal/plastic threaded adaptors where required for the connection of sanitary fixtures, valves, sockets, sliding and fixed joints, support raceways, isolating sheaths, elastic materials, expansion arms and bends, crossovers, couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. The pipes will be pressure tested before the plastering of wall commences and as per the manufacturers recommended testing pressures. 1.18 PPR Pipes A 20mm diameter pipework 120 Lm B 25mm diameter pipework 94 Lm C 32mm diameter pipework 88 Lm D 40mm diameter pipework 85 Lm E 50mm diameter pipework 70 Lm 1.19 Bends A 20mm diameter bend 56 No. B 25mm diameter bend 66 No. C 32mm diameter bend 43 No. D 40mm diameter bend 35 No. E 50mm diameter bend 15 No. 1.20 Tees A 25mm equal tee 50 No. B 32mm equal tee 25 No. C 40mm equal tee 18 No. D 50mm equal tee 10 No. 1.21 Reducers A 25 x 20mm diameter reducer 38 No. B 32 x 20mm diameter reducer 15 No. C 32 x 25mm diameter reducer 20 No. D 40 x 20mm diameter reducer 20 No. E 40 x 25mm diameter reducer 10 No. F 40 x 32mm diameter reducer 8 No. G 50 x 25mm diameter reducer 15 No. H 50 x 32mm diameter reducer 12 No. I 50 x 40mm diameter reducer 14 No. Total Carried to Ground Floor Collection Page BQ 8 BQ 4 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) 1.22 Unions A 20mm diameter pipe unions 36 No. B 25mm diameter pipe unions 25 No. C 32mm diameter pipe unions 30 No. D 40mm diameter pipe unions 25 No. E 50mm diameter pipe unions 16 No. 1.23 Threaded Fittings A 20mm male/female threaded 90 bend/elbow 36 No. B 25mm male/female threaded 90 bend/elbow 25 No. C 32mm male/female threaded 90 bend/elbow 18 No. D 40mm male/female threaded 90 bend/elbow 8 No. 1.24 Plugs A 40mm diameter pipe threaded plug 15 No. B 50mm ditto 10 No. 1.25 Valves A 25mm diameter approved medium pressure screw down full way nonrising stem wedge gate valve to BS 5154 PN 20 for series B rating, with wheel and head joints to steel tubing and complete with round 12 No. male threaded transition fittings. The gate valve to be as PEGLER or approved equivalent. B 32mm ditto 4 No. C 40mm ditto 6 No. D 50mm ditto 8 No. 1.26 Pipe sleeves 65mm diameter heavy duty PVC pipe sleeves for crossing over columns and beams. 25 Lm 1.27 Threaded Brass Coupling A 25mm male/female threaded brass coupling 25 No. B 32mm male/female threaded brass coupling 15 No. 1.28 Threaded Brass Adapter A 20mm male/female threaded brass adapter 35 No. B 25mm male/female threaded brass adapter 18 No. 1.29 Flexible Tubing 15mm diameter x 300mm long flexible connectors complete with integral chrome plated angle valve for connecting the sanitary fitting to water supply. To be as Cobra or equal and approved. 65 No 1.30 Angle valve 15mmØ Chrome plated angle regulating valve with 350mm long 65 No service connection Total Carried to Ground Floor Collection Page BQ 8 BQ 5 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) INTERNAL FOUL WATER DRAINAGE Supply, deliver and install the following UPVC, MUPVC, soil and waste systems respectively to B.S 5255 with fittings fixed to Manufactures Printed instructions and manufactured by reputable manufacturers. Tenderers must allow in their pipework prices for all the couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. 1.31 MuPVC and upvc Waste and Soil pipework A 100mm diameter heavy gauge golden brown UPVC pipe 85 Lm B 100mm diameter heavy gauge grey UPVC pipe 55 Lm C 50mm diameter waste pipe 58 Lm D 32mm diameter waste pipe 33 Lm 1.32 Bends A B C D 100mm diameter bend with access 23 No. 100mm diameter long radius bend 10 No. 50mm diameter sweep bend 18 No. 32mm diameter sweep bend 16 No. 1.33 Tees A 100mm diameter sweep tee 12 No. B 50mm diameter sweep tee 8 No. C 32mm diameter sweep tee 4 No. 1.34 Access Caps A B C 100mm diameter access cap 37 No. 50mm diameter access cap 25 No. 32mm diameter access cap 10 No. 1.35 Reducing Sockets A B C 40 x 32mm diameter reducing socket 18 No. 50 x 32mm diameter reducing socket 20 No. 100 x 50mm diameter reducing socket 15 No. Total Carried to Ground Floor Collection Page BQ 8 BQ 6 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) 1.36 Single Branch A B C 100 x 100mm diameter single branch with 50mm boss adaptor 12 No. 100 x 100mm diameter single branch with 40mm boss adaptor 18 No. 100 x 100mm diameter single branch 10 No. 1.37 Double Branch 100 x 100mm diameter double branch 12 No. 1.38 WC Connectors 100mm diameter WC connector 20 No. 1.39 Floor Traps 100 x 50 x 40 mm diameter 4-way Light Grey floor trap complete with grating. 25 No. 1.40 100 mm diameter Stainless Steel "Rofo" Drain with 2 No. 40 mm diameter inlets and 50 mm diameter outlet and floor grating. 8 No. Total Carried to Ground Floor Collection Page BQ 8 BQ 7 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description GROUND FLOOR COLLECTION PAGE FOR PLUMBING AND DRAINAGE WORKS Amount (Kshs) 1 Total carried forward from page 1 0.00 2 Total carried forward from page 2 3 Total carried forward from page 3 4 Total carried forward from page 4 5 Total carried forward from page 5 6 Total carried forward from page 6 7 Total carried forward from page 7 Total Plumbing and Drainage Works for Ground floor Carried to Mortuary Collection Page 28 BQ 8 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK BILL NO. 2 - MAIN MORTUARY BLOCK FIRST FLOOR Item Description Qnty Unit Rate (Kshs) Amount (Kshs) SANITARY FITTINGS Supply, deliver, install, test and fix the following sanitary fittings including all materials and jointings to supply, waste/soil overflow pipes.twyfords Ltd products are specified only as an indication of quality. Equal and approved appliances may be supplied. Where trade names are mentioned, the Ref. No. is intended only as a guide to the type and quality of fittings. 2.01 Water Closet (WC) Suite Close coupled water closet suite in approved colour complete with horizontal outlet to BS 3402 with 7.5 litre valveless ceramic cistern and fittings including siphon, 15mm diameter bottom inlet ball valve, 20mm diameter side overflow, plastic flush bend, inlet connection, chrome plated lever, ecoflush system with cistern lever and heavy plastic seat and cover with chrome plated hinges. As Tywfords or approved equivalent. 16 No. 2.02 Wash Hand Basins Pedestal Wash hand basin size 510 x 420mm with one tap hole and chain stay hole, 32mm diameter chrome plated pop up chain waste, concealed wall brackets, chrome plated single tap hole mixer as Cobra and chrome plated bottle trap (32mm 'P' trap) with 75mm seal. The wash hand basin to be as Twyfords 'Sola 510' or equal and approved. 14 No. 2.03 Ambulant Disabled Water Closet Suite Low level wash down water closet suite for the elderly and disabled in white complete with horizontal outlet, AND BOTTOM SUPPLY AND OVERFLOW WITH CLOSE COUPLING SIDE LEVER TREATMENT, 7.5 litre cistern, raised heavy duty toilet seat and cover and S-trap outlet and 600X35mm stainless steel grab rails (4 No.) in stainless steel. The set to be complete with wash hand basin, 6mm thick mirror, toilet roll holder and robe hook. All to be as ''Twyfords Avalon BTW'' or approved equivalent. 2 No. 2.04 Urinal Single range urinal bowl in white vitreous china comprising 1No. bowls complete with bowl support complete with push Button urinal Flush Valve, and fittings including chrome plated bottle trap, chrome plated flush pipe and spreader ref SS 6071SS with all connections, wall hangers/supports. To be as Twyfords 'Camden' or approved equivalent. 8 No 2.05 Toilet Roll Holder Toilet Roll Holder in vitreous china to BS 3402 in white colour of size 165X165mm and recessed into wall. Toilet roll holder to be as Twyfords '' SEMI RECESSED & ORNAMENTAL'' accessories Ref. No.VC 9808 WH 16 No. Total Carried to First Floor Collection Page BQ 16 BQ 9 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 2.06 Robe Hook Chrome plated robe hook mounted with concealed screws. To be as "Tywfords Spectrum 2000 Accessories" or equal and approved. 16 No 2.07 Mirrors 6mm thick polished plate glass silver backed mirror with bevelled edges, size 610 x 610mm, plugged and screwed to wall with 4No. chrome plated dome capped screws. The mirror shall rest against a layer of 5mm thick foam nest. 14 No. 2.08 Cleaner Sink Heavy duty sink size 455 x 380 x 230mm deep in fireclay complete with hardwood pad on the front edge and fitted bucket aluminium alloy grating and 20mm chrome plated wall mounted inclined bricon tap, chrome plate chain and rubber stopper and heavy gauge 11/2" bottle trap and stainless steel legs. All as "Armitage Shanks Birch" or approved equivalent. 1 No. 2.09 Soap Dispenser Soap dispenser, capacity 1.136 litres complete with plastic rawl plugs, fixing screws, lock and key complete with initial fill of soap gel. The soap dispenser to be as ZAPLON'S MARK 7 model, size 125X100X290mm high or approved equivalent. 8 No. 2.10 Hand Driers Automatic hand drier in white colour, operating on an infra-red automatic sensing system with safety cut-out complete with plastic rawl plugs and fixing screws. The hand drier to have a heating capacity of 1.8kw and to be of size 270x264x143mm deep as HEATRAE SADIA ''Hand Dri'' or approved equivalent. 8 No. 2.11 Laboratory Sinks 'Vulcathene'' black injection moulded polypropylene sink with self draining base and an outlet to accept the waste described below as Cat No. 602 complete with - ''Vultex Labline'' bench mounted 1-way outlet fitting with inlet for supply and side valve having swivel nozzle and spout. '' Vulcanethe'' 11/2'' waste, plug, back, nut, butyl rubber gasket, grating and chain as Cat No. 504. ''Vulcanethe'' anti-siphon bottle trap as Cat No. W561. Vulcathene 4.5litres dilution trap 54 No. 2.12 Emergency Drencher Shower Emergency Drencher Shower for use where accidental splashing of acid, chemical or radioactive chemical demands instant atttention. Automatic in action, the shower sends down torrential cascade of water as soon as the user pulls the chain. 11/4'' non- consussive valve with chain and rubber, 305mm diameter shower head with pipe and wall stays. Metal work chrome-plated. As ''Armittage Shanks'' or equal and approved. 10 No. Total Carried to First Floor Collection Page BQ 16 BQ 10 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 2.13 Eye Wash Fountain All chrome-plated metal eye wash fountain which instantly provides a gentle stream of water to wash the eyes in the event of an accident. The unit shall be as''armitage Shanks'' or equal and approved. 10 No. Total Carried to First Floor Collection Page BQ 16 BQ 11 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) Internal Plumbing Works Supply, deliver and install pipes, tubing and fittings as described and shown on the drawings. The pipes shall be PN 25 PPR pipes where exposed to adverse weather condition and all conforming to the current European standards for PPR installations and to the Engineers approval, pipe jointing shall be by polyfusion or use of electric coupling. Rates must allow for all Metal/plastic threaded adaptors where required for the connection of sanitary fixtures, valves, sockets, sliding and fixed joints, support raceways, isolating sheaths, elastic materials, expansion arms and bends, crossovers, couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. The pipes will be pressure tested before the plastering of wall commences and as per the manufacturers recommended testing pressures. 2.14 PPR Pipes A 20mm diameter pipework 135 Lm B 25mm diameter pipework 110 Lm C 32mm diameter pipework 96 Lm D 40mm diameter pipework 45 Lm E 50mm diameter pipework 50 Lm 2.15 Bends A 20mm diameter bend 27 No. B 25mm diameter bend 49 No. C 32mm diameter bend 54 No. D 40mm diameter bend 26 No. E 50mm diameter bend 8 No. 2.16 Tees A 25mm equal tee 25 No. B 32mm equal tee 10 No. C 40mm equal tee 8 No. D 50mm equal tee 5 No. 2.17 Reducers A 25 x 20mm diameter reducer 28 No. B 32 x 20mm diameter reducer 9 No. C 32 x 25mm diameter reducer 15 No. D 40 x 20mm diameter reducer 11 No. E 40 x 25mm diameter reducer 5 No. F 40 x 32mm diameter reducer 8 No. G 50 x 25mm diameter reducer 5 No. H 50 x 32mm diameter reducer 4 No. I 50 x 40mm diameter reducer 12 No. Total Carried to First Floor Collection Page BQ 16 BQ 12 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) 2.18 Unions A 20mm diameter pipe unions 56 No. B 25mm diameter pipe unions 48 No. C 32mm diameter pipe unions 34 No. D 40mm diameter pipe unions 28 No. E 50mm diameter pipe unions 21 No. 2.19 Threaded Fittings A 20mm male/female threaded 90 bend/elbow 46 No. B 25mm male/female threaded 90 bend/elbow 34 No. C 32mm male/female threaded 90 bend/elbow 28 No. D 40mm male/female threaded 90 bend/elbow 19 No. 2.20 Plugs A 40mm diameter pipe threaded plug 26 No. B 50mm ditto 22 No. 2.21 Valves A 25mm diameter approved medium pressure screw down full way nonrising stem wedge gate valve to BS 5154 PN 20 for series B rating, with wheel and head joints to steel tubing and complete with round 12 No. male threaded transition fittings. The gate valve to be as PEGLER or approved equivalent. B 32mm ditto 4 No. C 40mm ditto 6 No. D 50mm ditto 8 No. 2.22 Pipe sleeves 65mm diameter heavy duty PVC pipe sleeves for crossing over columns and beams. 25 Lm 2.23 Threaded Brass Coupling A 25mm male/female threaded brass coupling 25 No. B 32mm male/female threaded brass coupling 16 No. 2.24 Threaded Brass Adapter A 20mm male/female threaded brass adapter 65 No. B 25mm male/female threaded brass adapter 36 No. 2.25 Flexible Tubing 15mm diameter x 300mm long flexible connectors complete with integral chrome plated angle valve for connecting the sanitary fitting to water supply. To be as Cobra or equal and approved. 46 No 2.26 Angle valve 15mmØ Chrome plated angle regulating valve with 350mm long 46 No service connection Total Carried to First Floor Collection Page BQ 16 BQ 13 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) INTERNAL FOUL WATER DRAINAGE Supply, deliver and install the following UPVC, MUPVC, soil and waste systems respectively to B.S 5255 with fittings fixed to Manufactures Printed instructions and manufactured by reputable manufacturers. Tenderers must allow in their pipework prices for all the couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. 2.27 MuPVC and upvc Waste and Soil pipework A 100mm diameter heavy gauge golden brown UPVC pipe 155 Lm B 100mm diameter heavy gauge grey UPVC pipe 135 Lm C 50mm diameter waste pipe 78 Lm D 32mm diameter waste pipe 43 Lm 2.28 Bends A B C D 100mm diameter bend with access 43 No. 100mm diameter long radius bend 20 No. 50mm diameter sweep bend 18 No. 32mm diameter sweep bend 14 No. 2.29 Tees A 100mm diameter sweep tee 12 No. B 50mm diameter sweep tee 8 No. C 32mm diameter sweep tee 4 No. 2.30 Access Caps A B C 100mm diameter access cap 37 No. 50mm diameter access cap 25 No. 32mm diameter access cap 10 No. 2.31 Reducing Sockets A B C 40 x 32mm diameter reducing socket 18 No. 50 x 32mm diameter reducing socket 20 No. 100 x 50mm diameter reducing socket 15 No. Total Carried to First Floor Collection Page BQ 16 BQ 14 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) 2.32 Single Branch A B C 100 x 100mm diameter single branch with 50mm boss adaptor 22 No. 100 x 100mm diameter single branch with 40mm boss adaptor 28 No. 100 x 100mm diameter single branch 15 No. 2.33 Double Branch 100 x 100mm diameter double branch 14 No. 2.34 WC Connectors 100mm diameter WC connector 18 No. 2.35 Floor Traps 100 x 50 x 40 mm diameter 4-way Light Grey floor trap complete with grating. 24 No. Total Carried to First Floor Collection Page BQ 16 BQ 15 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description FIRST FLOOR COLLECTION PAGE FOR PLUMBING AND DRAINAGE WORKS Amount (Kshs) 1 Total carried forward from page BQ 9 2 Total carried forward from page BQ 10 3 Total carried forward from page BQ 11 4 Total carried forward from page BQ 12 5 Total carried forward from page BQ 13 6 Total carried forward from page BQ 14 7 Total carried forward from page BQ 15 Total Plumbing and Drainage Works for First floor Carried to Mortuary collection Page BQ 28 BQ 16 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK BILL NO. 3 - MAIN MORTUARY BLOCK SECOND FLOOR Item Description Qnty Unit Rate (Kshs) Amount (Kshs) SANITARY FITTINGS Supply, deliver, install, test and fix the following sanitary fittings including all materials and jointings to supply, waste/soil overflow pipes.twyfords Ltd products are specified only as an indication of quality. Equal and approved appliances may be supplied. Where trade names are mentioned, the Ref. No. is intended only as a guide to the type and quality of fittings. 3.01 Water Closet (WC) Suite Close coupled water closet suite in approved colour complete with horizontal outlet to BS 3402 with 7.5 litre valveless ceramic cistern and fittings including siphon, 15mm diameter bottom inlet ball valve, 20mm diameter side overflow, plastic flush bend, inlet connection, chrome plated lever, ecoflush system with cistern lever and heavy plastic seat and cover with chrome plated hinges. As Tywfords or approved equivalent. 24 No. 3.02 Wash Hand Basins Pedestal Wash hand basin size 510 x 420mm with one tap hole and chain stay hole, 32mm diameter chrome plated pop up chain waste, concealed wall brackets, chrome plated single tap hole mixer as Cobra and chrome plated bottle trap (32mm 'P' trap) with 75mm seal. The wash hand basin to be as Twyfords 'Sola 510' or equal and approved. 14 No. 3.03 Ambulant Disabled Water Closet Suite Low level wash down water closet suite for the elderly and disabled in white complete with horizontal outlet, AND BOTTOM SUPPLY AND OVERFLOW WITH CLOSE COUPLING SIDE LEVER TREATMENT, 7.5 litre cistern, raised heavy duty toilet seat and cover and S-trap outlet and 600X35mm stainless steel grab rails (4 No.) in stainless steel. The set to be complete with wash hand basin, 6mm thick mirror, toilet roll holder and robe hook. All to be as ''Twyfords Avalon BTW'' or approved equivalent. 2 No. 3.04 Urinal Single range urinal bowl in white vitreous china comprising 1No. bowls complete with bowl support complete with push Button urinal Flush Valve, and fittings including chrome plated bottle trap, chrome plated flush pipe and spreader ref SS 6071SS with all connections, wall hangers/supports. To be as Twyfords 'Camden' or approved equivalent. 8 No 3.05 Toilet Roll Holder Toilet Roll Holder in vitreous china to BS 3402 in white colour of size 165X165mm and recessed into wall. Toilet roll holder to be as Twyfords '' SEMI RECESSED & ORNAMENTAL'' accessories Ref. No.VC 9808 WH 24 No. Total Carried to Second Floor Collection Page BQ 23 BQ 17 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 3.06 Robe Hook Chrome plated robe hook mounted with concealed screws. To be as "Tywfords Spectrum 2000 Accessories" or equal and approved. 24 No 3.07 Mirrors 6mm thick polished plate glass silver backed mirror with bevelled edges, size 610 x 610mm, plugged and screwed to wall with 4No. chrome plated dome capped screws. The mirror shall rest against a layer of 5mm thick foam nest. 14 No. 3.08 Cleaner Sink Heavy duty sink size 455 x 380 x 230mm deep in fireclay complete with hardwood pad on the front edge and fitted bucket aluminium alloy grating and 20mm chrome plated wall mounted inclined bricon tap, chrome plate chain and rubber stopper and heavy gauge 11/2" bottle trap and stainless steel legs. All as "Armitage Shanks Birch" or approved equivalent. 1 No. 3.09 Soap Dispenser Soap dispenser, capacity 1.136 litres complete with plastic rawl plugs, fixing screws, lock and key complete with initial fill of soap gel. The soap dispenser to be as ZAPLON'S MARK 7 model, size 125X100X290mm high or approved equivalent. 8 No. 3.10 Hand Driers Automatic hand drier in white colour, operating on an infra-red automatic sensing system with safety cut-out complete with plastic rawl plugs and fixing screws. The hand drier to have a heating capacity of 1.8kw and to be of size 270x264x143mm deep as HEATRAE SADIA ''Hand Dri'' or approved equivalent. 8 No. 3.11 Kitchen Sink Single bowl, single drainer stainless steel kitchen sink of size 1800 x 600mm as manufactured by ASL. The bowl size to be 430 x 420 x 200mm deep complete with chrome plated 40mm waste fittings, plugs, chain stays, overflow, 1No. 15mm diameter chrome plated sink mixer with over-arm swivel spout as Cobra model 166/04 with carina handles, chrome plated bottle trap with 75mm deep seal and chain waste fitting. 4 No. 3.12 Undersink Instant Water Heater "Heatrae Sadia Express 15" or approved equivalent, undersink heater of 15 litres capacity with 3.0Kw heating element and complete with adjustable thermostat (5-75ºC), over-temperature cut-out, dry start cut-out, 15mm copper pipe connections for cold water inlet and hot water outlet at top suitable for connection to pressure vented mixer tap described below. 4 No. Total Carried to Second Floor Collection Page BQ 23 BQ 18 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) Internal Plumbing Works Supply, deliver and install pipes, tubing and fittings as described and shown on the drawings. The pipes shall be PN 25 PPR pipes where exposed to adverse weather condition and all conforming to the current European standards for PPR installations and to the Engineers approval, pipe jointing shall be by polyfusion or use of electric coupling. Rates must allow for all Metal/plastic threaded adaptors where required for the connection of sanitary fixtures, valves, sockets, sliding and fixed joints, support raceways, isolating sheaths, elastic materials, expansion arms and bends, crossovers, couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. The pipes will be pressure tested before the plastering of wall commences and as per the manufacturers recommended testing pressures. 3.13 PPR Pipes A 20mm diameter pipework 234 Lm B 25mm diameter pipework 175 Lm C 32mm diameter pipework 98 Lm D 40mm diameter pipework 80 Lm E 50mm diameter pipework 40 Lm 3.14 Bends A 20mm diameter bend 75 No. B 25mm diameter bend 64 No. C 32mm diameter bend 50 No. D 40mm diameter bend 45 No. E 50mm diameter bend 12 No. 3.15 Tees A 25mm equal tee 27 No. B 32mm equal tee 34 No. C 40mm equal tee 15 No. D 50mm equal tee 5 No. 3.16 Reducers A 25 x 20mm diameter reducer 58 No. B 32 x 20mm diameter reducer 22 No. C 32 x 25mm diameter reducer 21 No. D 40 x 20mm diameter reducer 11 No. E 40 x 25mm diameter reducer 15 No. F 40 x 32mm diameter reducer 15 No. G 50 x 25mm diameter reducer 18 No. H 50 x 32mm diameter reducer 14 No. I 50 x 40mm diameter reducer 24 No. Total Carried to Second Floor Collection Page BQ 23 BQ 19 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) 3.17 Unions A 20mm diameter pipe unions 36 No. B 25mm diameter pipe unions 38 No. C 32mm diameter pipe unions 24 No. D 40mm diameter pipe unions 29 No. E 50mm diameter pipe unions 17 No. 3.18 Threaded Fittings A 20mm male/female threaded 90 bend/elbow 16 No. B 25mm male/female threaded 90 bend/elbow 14 No. C 32mm male/female threaded 90 bend/elbow 18 No. D 40mm male/female threaded 90 bend/elbow 19 No. 3.19 Plugs A 40mm diameter pipe threaded plug 26 No. B 50mm ditto 22 No. 3.20 Valves A 25mm diameter approved medium pressure screw down full way nonrising stem wedge gate valve to BS 5154 PN 20 for series B rating, with wheel and head joints to steel tubing and complete with round 12 No. male threaded transition fittings. The gate valve to be as PEGLER or approved equivalent. B 32mm ditto 4 No. C 40mm ditto 6 No. D 50mm ditto 8 No. 3.21 Pipe sleeves 65mm diameter heavy duty PVC pipe sleeves for crossing over columns and beams. 25 Lm 3.22 Threaded Brass Coupling A 25mm male/female threaded brass coupling 25 No. B 32mm male/female threaded brass coupling 16 No. 3.23 Threaded Brass Adapter A 20mm male/female threaded brass adapter 16 No. B 25mm male/female threaded brass adapter 24 No. 3.24 Flexible Tubing 15mm diameter x 300mm long flexible connectors complete with integral chrome plated angle valve for connecting the sanitary fitting to water supply. To be as Cobra or equal and approved. 40 No 3.25 Angle valve 15mmØ Chrome plated angle regulating valve with 350mm long 40 No service connection Total Carried to Second Floor Collection Page BQ 23 BQ 20 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) INTERNAL FOUL WATER DRAINAGE Supply, deliver and install the following UPVC, MUPVC, soil and waste systems respectively to B.S 5255 with fittings fixed to Manufactures Printed instructions and manufactured by reputable manufacturers. Tenderers must allow in their pipework prices for all the couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. 3.26 MuPVC and upvc Waste and Soil pipework A 100mm diameter heavy gauge golden brown UPVC pipe 205 Lm B 100mm diameter heavy gauge grey UPVC pipe 135 Lm C 50mm diameter waste pipe 78 Lm D 32mm diameter waste pipe 43 Lm 3.27 Bends A B C D 100mm diameter bend with access 43 No. 100mm diameter long radius bend 20 No. 50mm diameter sweep bend 18 No. 32mm diameter sweep bend 14 No. 3.28 Tees A 100mm diameter sweep tee 12 No. B 50mm diameter sweep tee 8 No. C 32mm diameter sweep tee 4 No. 3.29 Access Caps A B C 100mm diameter access cap 37 No. 50mm diameter access cap 25 No. 32mm diameter access cap 10 No. 3.30 Reducing Sockets A B C 40 x 32mm diameter reducing socket 18 No. 50 x 32mm diameter reducing socket 20 No. 100 x 50mm diameter reducing socket 15 No. Total Carried to Second Floor Collection Page BQ 23 BQ 21 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) 3.31 Single Branch A B C 100 x 100mm diameter single branch with 50mm boss adaptor 22 No. 100 x 100mm diameter single branch with 40mm boss adaptor 28 No. 100 x 100mm diameter single branch 15 No. 3.32 Double Branch 100 x 100mm diameter double branch 14 No. 3.33 WC Connectors 100mm diameter WC connector 18 No. 3.34 Floor Traps 100 x 50 x 40 mm diameter 4-way Light Grey floor trap complete with grating. 26 No. Total Carried to Second Floor Collection Page BQ 23 BQ 22 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description SECOND FLOOR COLLECTION PAGE FOR PLUMBING AND DRAINAGE WORKS Amount (Kshs) 1 Total carried forward from page BQ 17 2 Total carried forward from page BQ 18 3 Total carried forward from page BQ 19 4 Total carried forward from page BQ 20 5 Total carried forward from page BQ 21 6 Total carried forward from page BQ 22 Total Plumbing and Drainage Works for Second floor Carried to Mortuary Collection Page BQ 28 BQ 23 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK BILL NO. 4 - MAIN MORTUARY BLOCK FIRE PROTECTION Item Description Qty Unit Rate (Kshs) Amount (Kshs) Fire Protection Supply, deliver and install the following fire fighting equipment in positions indicated on the contract drawings or as shall be instructed by the Engineer. Supply and install the following fire fighting installation and equipment as described and shown on the drawings. Tenderers should allow for all fittings, joints couplings including unions and clamps where necessary for the functioning of the installation when pricing. 4.01 Hosereel Installation 20mm diameter 30m long swinging type hose reel complete with delivery valve, mild steel feed pipe, isolation valve, guide and all other accessories as ''Angus Fire Armour" or equal and approved. 6 No. 4.02 GMS Pipework, Class B A 25mm diameter pipework 30 LM B 50mm diameter pipework 278 LM C 65mm diameter pipework 72 LM Extra over pipework 4.03 Bends A 25mm diameter bends 65 No B 50mm diameter bends 35 No 4.04 Tees 50mm diameter equal Tees 8 No 4.05 Valves A 25mm diameter approved medium pressure screw down full way nonrising stem wedge gate valve to BS1952, with wheel and head joints to steel tubing. The gate valve to be as PEGLER or approved equivalent. 6 No B 65mm diameter ditto 2 No 4.06 Unions A 25mm diameter pipe unions 32 No B 50mm diameter pipe unions 17 No 4.07 Hosereel Pumpset Hosereel Pumpset, one duty, the other standby mounted on a frame with a mild steel base plate. Each pump shall have a duty 5m³/hr.against 50m head as Grundfos model CH 4-40 or approved equivalent. In additional, there shall be a 60litres diaphram pressure vessel (as Varem or approved equivalent), pressure switches, a switch to protect dry run, 65mm foot valve and strainer, tank connections, gate valves and non-return valves. Control shall be effected via a pressure switch through a pre-wired control panel which shall give automatic change-over from duty to standby pump within 5 seconds should the duty pump fail to deliver for any reason. The pumpset shall include all non-returns valves, timer, isolating valves and pipe connections. 1 No Total Carried to Collection Page BQ 27 BQ 24 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) 4.08 Control and Control Panel Control panel for the above pumps with contactors, over voltage and under voltage protection relays, MCBs, start/stop push buttons and indicators lights. All this shall be housed in a lockable cabinet (with integral isolator) made from SWG 18 mild steel sheet that is oven powder coated. The controls shall also include a float switch or flow switch for prevention against dry running complete with its cable. 1 No 4.09 Fire Hose Cabinet Surface mounted fire hose cabinet manufactured from electro galvanized steel sheet with folded edges and curled hose plate edges and painted with electro static powder coating, 180 C baked. The cabinet size shall be capable of housing hosereel and 3No. portable extinguishers as described in the next page and should conform to BS EN 671-1. To be as Germania or equal and approved. 6 No 4.10 Painting Allow for painting of the hosereel installation with 2 coats of super gloss paint on a primer coat to the approval of the Project Engineer. 1 No. 4.11 Standard Printed Lable Standard printed lables for the fire cupboards. 1 Item 4.12 Fire Hydrants 65mm diameter standpipe type fire hydrant conforming to BS 750: 1977 complete with Copper alloy spindle complying with requirements of BS 2874 and having a thread machined of trapezoidal form, Cast iron spindle cap secured to the spindle by an M12 hexagonal socket set screw to BS 4168, A tapered key suitable for the spindle cap, A screwed outlet with cast iron cap attached to the hydrant body by a chain. All other necessary accessories necessary for the proper functioning of the hydrant. The hydrant to be as Greenfield type or approved equivalent. 1 No. 4.13 Hydrant Key and Cover Key A suitable hydrant key and hydrant cover key for operating the fire hydrant valve 1 Set Total Carried to Collection Page BQ 27 BQ 25 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK Item Description Qty Unit Rate (Kshs) Amount (Kshs) Portable Fire Extinguishers Supply, deliver, install, test and commission the following portable fire extinguishers and conforming to BS EN 3 / BS 1449. 4.14 Water/Carbon Dioxide Gas Fire Extinguisher A 9 litres water/carbon dioxide gas portable fire extinguisher complete with pressure gauge, initial charge and mounting brackets. 8 No B 5kg carbon dioxide gas portable fire extinguisher complete with pressure gauge, initial charge and mounting brackets. 10 No C Dry Chemical Powder Fire Extinguisher 5kg dry chemical podwer portable fire extinguisher complete with pressure gauge, initial charge and mounting brackets. 10 No D Automatic Dry Chemical Powder Fire Extinguisher 10kg automatic dry chemical podwer fire extinguisher complete with pressure gauge, initial charge, glass bulb, sprinkler head and mounting base. The operating temperature of the bulb shall be 68 o C. The unit shall be mounted on the concrete slab ceiling using purpose-made screws and to be as Germania, model GD 10 or equal and approved. 10 No 4.15 Manual Alarm Bell 9" (225mm) manual operated alarm bell (Gong) 8 No 4.16 Fire Notices Allow for fire signage for the hose reel system, fire exits and fire instructions as as described in the particular specifications and to the Project Engineer's approval. 8 No Total Carried to Collection Page BQ 27 BQ 26 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK COLLECTION PAGE FOR FIRE PROTECTION SERVICES Item Description Amount (Kshs) 1 Total carried forward from page BQ 24 2 Total carried forward from page BQ 25 3 Total carried forward from page BQ 26 BQ 27 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - MORTUARY BLOCK MAIN MORTUARY BLOCK COLLECTION PAGE Item Description Total Cost (Kshs) 1 Total carried forward from Collection Page for Plumbing and Drainage Works for Ground Floor ( BQ 8) 2 Total carried forward from Collection Page for Plumbing and Drainage Works for First Floor (BQ 16) 3 Total carried forward from Collection Page for Plumbing and Drainage Works for Second Floor (BQ 23) 4 Total carried forward from Collection for Fire Protection Installations (BQ 27) Total for Plumbing, Drainage and Fire Fighting for Main Mortuary Block Carried Forward to Mini-Summary Page BQ 58 BQ 28 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - PUBLIC TOILETS Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 2.00 BILL NO. 5 - PUBLIC TOILETS SANITARY FITTINGS Supply, deliver, install, test and fix the following sanitary fittings including all materials and jointings to supply, waste/soil overflow pipes.twyfords Ltd products are specified only as an indication of quality. Equal and approved appliances may be supplied. Where trade names are mentioned, the Ref. No. is intended only as a guide to the type and quality of fittings. 5.01 Water Closet (WC) Suite Squatting water closet suite in vitrreous china comprising of water closet bowl with top plate and integral foot threads, S-trap connector, 9 litres high cistern and fittings and pull chain including siphon, 15mm dia side inlet ball valve, 20mm dia side overflow, plastic flush pipe, inlet connector and cistern supports, All to be as ''Twyfords Oriental'' or approved equivalent. 12 No. 5.02 Wash Hand Basins Pedestal Wash hand basin size 510 x 420mm with one tap hole and chain stay hole, 32mm diameter chrome plated pop up chain waste, concealed wall brackets, chrome plated single tap hole mixer as Cobra and chrome plated bottle trap (32mm 'P' trap) with 75mm seal. The wash hand basin to be as Twyfords 'Sola 510' or equal and approved. 12 No. 5.03 Ambulant Disabled Water Closet Suite Low level wash down water closet suite for the elderly and disabled in white complete with horizontal outlet, AND BOTTOM SUPPLY AND OVERFLOW WITH CLOSE COUPLING SIDE LEVER TREATMENT, 7.5 litre cistern, raised heavy duty toilet seat and cover and S-trap outlet and 600X35mm stainless steel grab rails (4 No.) in stainless steel. The set to be complete with wash hand basin, 6mm thick mirror, toilet roll holder and robe hook. All to be as ''Twyfords Avalon BTW'' or approved equivalent. 2 No. 5.04 Urinal Single range urinal bowl in white vitreous china comprising 1No. bowls complete with bowl support complete with push Button urinal Flush Valve, and fittings including chrome plated bottle trap, chrome plated flush pipe and spreader ref SS 6071SS with all connections, wall hangers/supports. To be as Twyfords 'Camden' or approved equivalent. 4 No 5.05 Toilet Roll Holder Toilet Roll Holder in vitreous china to BS 3402 in white colour of size 165X165mm and recessed into wall. Toilet roll holder to be as Twyfords '' SEMI RECESSED & ORNAMENTAL'' accessories Ref. No.VC 9808 WH 12 No. Total Carried to Public Toilets Collection Page BQ 35 BQ 29 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - PUBLIC TOILETS Item Description Qnty Unit Rate (Kshs) Amount (Kshs) 5.06 Robe Hook Chrome plated robe hook mounted with concealed screws. To be as "Tywfords Spectrum 2000 Accessories" or equal and approved. 12 No 5.07 Mirrors 6mm thick polished plate glass silver backed mirror with bevelled edges, size 610 x 610mm, plugged and screwed to wall with 4No. chrome plated dome capped screws. The mirror shall rest against a layer of 5mm thick foam nest. 12 No. 5.08 Soap Dispenser Soap dispenser, capacity 1.136 litres complete with plastic rawl plugs, fixing screws, lock and key complete with initial fill of soap gel. The soap dispenser to be as ZAPLON'S MARK 7 model, size 125X100X290mm high or approved equivalent. 12 No. 5.09 Hand Driers Automatic hand drier in white colour, operating on an infra-red automatic sensing system with safety cut-out complete with plastic rawl plugs and fixing screws. The hand drier to have a heating capacity of 1.8kw and to be of size 270x264x143mm deep as HEATRAE SADIA ''Hand Dri'' or approved equivalent. 12 No. Total Carried to Public Toilets Collection Page BQ 35 BQ 30 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - PUBLIC TOILETS Item Description Qty Unit Rate (Kshs) Amount (Kshs) Internal Plumbing Works Supply, deliver and install pipes, tubing and fittings as described and shown on the drawings. The pipes shall be PN 25 PPR pipes where exposed to adverse weather condition and all conforming to the current European standards for PPR installations and to the Engineers approval, pipe jointing shall be by polyfusion or use of electric coupling. Rates must allow for all Metal/plastic threaded adaptors where required for the connection of sanitary fixtures, valves, sockets, sliding and fixed joints, support raceways, isolating sheaths, elastic materials, expansion arms and bends, crossovers, couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. The pipes will be pressure tested before the plastering of wall commences and as per the manufacturers recommended testing pressures. 5.10 PPR Pipes A 20mm diameter pipework 40 Lm B 25mm diameter pipework 18 Lm C 32mm diameter pipework 25 Lm D 40mm diameter pipework 75 Lm 5.11 Bends A 20mm diameter bend 14 No. B 25mm diameter bend 8 No. C 32mm diameter bend 12 No. D 40mm diameter bend 5 No. 5.12 Tees A 25mm equal tee 3 No. B 32mm equal tee 8 No. C 40mm equal tee 7 No. 5.13 Reducers A 25 x 20mm diameter reducer 12 No. B 32 x 20mm diameter reducer 5 No. C 32 x 25mm diameter reducer 8 No. F 40 x 32mm diameter reducer 5 No. Total Carried to Public Toilets Collection Page BQ 35 BQ 31 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - PUBLIC TOILETS Item Description Qty Unit Rate (Kshs) Amount (Kshs) 5.14 Unions A 20mm diameter pipe unions 8 No. B 25mm diameter pipe unions 7 No. C 32mm diameter pipe unions 7 No. D 40mm diameter pipe unions 15 No. 5.15 Threaded Fittings A 20mm male/female threaded 90 bend/elbow 10 No. B 25mm male/female threaded 90 bend/elbow 5 No. C 32mm male/female threaded 90 bend/elbow 8 No. D 40mm male/female threaded 90 bend/elbow 5 No. 5.16 Plugs 40mm diameter pipe threaded plug 15 No. 5.17 Valves A 25mm diameter approved medium pressure screw down full way nonrising stem wedge gate valve to BS 5154 PN 20 for series B rating, with wheel and head joints to steel tubing and complete with round 4 No. male threaded transition fittings. The gate valve to be as PEGLER or approved equivalent. B 32mm ditto 3 No. C 40mm ditto 2 No. 5.18 Threaded Brass Coupling A 25mm male/female threaded brass coupling 12 No. B 32mm male/female threaded brass coupling 12 No. 5.19 Threaded Brass Adapter A 20mm male/female threaded brass adapter 65 No. B 25mm male/female threaded brass adapter 36 No. 5.20 Flexible Tubing 15mm diameter x 300mm long flexible connectors complete with integral chrome plated angle valve for connecting the sanitary fitting to water supply. To be as Cobra or equal and approved. 24 No 5.21 Angle valve 15mmØ Chrome plated angle regulating valve with 350mm long 24 No. service connection Total Carried to Public Toilets Collection Page BQ 35 BQ 32 26/10/2015

NAIROBI FUNERAL HOME AND FORENSICS - PUBLIC TOILETS Item Description Qty Unit Rate (Kshs) Amount (Kshs) INTERNAL FOUL WATER DRAINAGE Supply, deliver and install the following UPVC, MUPVC, soil and waste systems respectively to B.S 5255 with fittings fixed to Manufactures Printed instructions and manufactured by reputable manufacturers. Tenderers must allow in their pipework prices for all the couplings, clippings, connectors, joints etc. as required in the running lengths of pipework and also where necessary, for pipe fixing clips, holder bats plugged and screwed for the proper and satisfactory functioning of the system. 5.22 MuPVC and upvc Waste and Soil pipework A 100mm diameter heavy gauge golden brown UPVC pipe 35 Lm B 100mm diameter heavy gauge grey UPVC pipe 14 Lm C 50mm diameter waste pipe 25 Lm D 32mm diameter waste pipe 15 Lm 5.23 Bends A B C D 100mm diameter bend with access 12 No. 100mm diameter long radius bend 4 No. 50mm diameter sweep bend 8 No. 32mm diameter sweep bend 8 No. 5.24 Tees A 100mm diameter sweep tee 4 No. B 50mm diameter sweep tee 2 No. 5.25 Access Caps A B C 100mm diameter access cap 5 No. 50mm diameter access cap 5 No. 32mm diameter access cap 12 No. 5.26 Reducing Sockets A B C 40 x 32mm diameter reducing socket 8 No. 50 x 32mm diameter reducing socket 10 No. 100 x 50mm diameter reducing socket 5 No. Total Carried to Public Toilets Collection Page BQ 35 BQ 33 26/10/2015