HYDRAULIC CRIMPING TOOL HT 120 Crimping force kn 120 488 138 5,7 This lightweight and self contained tool will accept the semi-circular slotted dies, coon to most 130 kn tools. It is particularly suitable for installing crimp type electrical connectors for overhead line applications. The tool features a double speed action: a fast advancing speed for rapid approach of the dies to the connector and a slower more powerful speed for crimping. For ease of operation and comfort of the operator the tool head can be fully rotated through 180 degrees. Main applications - max section 2 L.V. lugs L.V. splices Insulated terminals C sleeve connectors H.V. lugs H.V. splices 400 240 240 185 400 240 The built-in safety valve will by-pass the oil supplywhen the maximum pressure is reached, and a pressure release system can easily be operated at any stage of the compression. HT 120 features a double speed action: a fast advancing speed for rapid approach of the dies to the connector and a slower more powerful speed for crimping. Dimensions VAL P3 * 620x380xh135 2,5 * *Suitable for storage of the tool and 14 sets of dies. PRISMA COMPONENTS - Tools 1
HYDRAULIC CUTTING HEAD TC 120 Hydraulic cutting head specifically designed to cut Copper, Aluminium and Telecounications cable having a max overall diameter of 120. The head can easily be opened to cut running cables, and the handle allows the most comfortable positioning of the head onto the cable to be cut. The head is complete with a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max. Max cutting Ø Max operating pressure bar 120 700 536 175 9,5 Dimensions VAL TC 120 590x209xh84 4,9 * 3x150 2 Steel armoured Ø80 TC120 cutting capacity - a few examples: Cable type 1000 2 Cu - EPR rubber insulated; Ø85 1000 2 Cu - EPR rubber insulated + lead sheath; Ø92 1000 2 Cu - EPR rubber insulated + lead sheath + PE sheath; Ø100 240 2 EPR rubber insulated 2 PRISMA COMPONENTS - Tools
HYDRAULIC PUMPS PO 7000 Foot operated double speed pump, developing a maximum pressure of 700 bar. hose complete with coupler. The pump is supplied with 3 m long high pressure flexible female self-lock quick Pressure can be withdrawn at any time during operation by depressing the release lever. A solid shaped stand gives the pump stability during operation. Operating pressure bar 120 680 200 163 9,8 Dimensions VAL P21 * 820x430xh290 6,74 * with the pump CPP-0 Foot operated double speed pump, developing a maximum pressure of 700 bar. hose complete with coupler. The pump is supplied with 3 m long high pressure flexible female self-lock quick Pressure can be withdrawn at any time during operation by depressing the release lever. A solid shaped stand gives the pump stability during operation. Operating pressure bar 700 320 150 200 6,8 PRISMA COMPONENTS - Tools 3
9.6 V CORDLESS HYDRAULIC CRIMPING TOOL B 54D-D6 The professional tool ideal for OH lines and residential service applications. Basic tool with battery and wrist strap charger adapter carrying case suitable for storing the tool and accessories Extremely quiet, minimal vibration. Durable moulded body offering high resistance to wear and damage in all operating conditions. Ni-MH battery; powerful, better environmental compatibility. in a robust plastic case for storing the tool and all accessories. Two batteries and charger included. Standard interchangeable crimping jaw: CDD6 with D3 groove to accept all W style crimping dies + BG fixed groove. Complete with a display which, after every operation and battery insertion, indicates the residual battery power. Can be operated with one hand. Balanced for greater control. Jaws rotate 180 for ease of operation in confined spaces. Fitted with a maximum pressure valve. Crimping force kn Ni-MH 54 450 119 66 9.6 V 3.0 Ah 2,9 Main applications - max section AWG Copper lugs and splices Aluminum lugs and splices Aluminum H taps 300 MCM 4/0 4/0-4/0 Dimensions VAL P 497x370x137 2,3 * VAL MAT-W 175x96x45 0,93 * 4 PRISMA COMPONENTS - Tools
NEW TOOLS Hydraulic 18.0 V CORDLESS HYDRAULIC CRIMPING TOOL B 1350-CE Basic tool with battery and shoulder strap charger Plastic carrying case suitable for storing the tool and 7 die sets The next generation of Cembre cordless hydraulic tools represents a significantly advantageous evolution from current models. Born of the renowned B135-C type crimping tool, B1350-CE is suitable for a wide range of connectors up to 400 sq using die sets coon to the Cembre 130 kn tooling range. New Li-Ion 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater crimping speed and crimping force result from a revitalised hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. The OLED display provides essential real time tool operating information data including: Crimping pressure and force being generated, for confirmation of adherence to norms and best practice power availability Tool identification, LED work light state, reset, no. of operational and service crimping cycles Tool service required to maintain optimum condition. Designed with improved balance, B1350-CE is easily manageable during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal while additional convenience and safety are provided by LED lighting of the working area. Crimping cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface. Operating temperature: -15 to +50 C Nominal Compression Force kn Jaw Opening 132 338 344 83 18,0 V 4.0 Ah 6,4 Main applications - max section 2 L.V. lugs L.V. splices Insulated terminals C sleeve connectors H.V. lugs H.V. splices 400 240 240 185 400 240 Dimensions VALP36 500x480x128 3,1 * PRISMA COMPONENTS - Tools 5
9.6 V CORDLESS HYDRAULIC CUTTING TOOL OVERHEAD LINE APPLICATION B35-TC0 Basic tool with battery and wrist strap charger adapter Plastic carrying case suitable for storing the tool and accessories Can be operated with one hand. Balanced for greater control. Head rotates 180 for ease of operation in confined spaces. Fitted with a maximum pressure valve. Extremely quiet, minimal vibration. Durable moulded body offering high resistance to wear and damage in all operating conditions. Ni-MH battery; powerful, better environmental compatibility. Complete with a display which, after every operation and battery insertion, indicates the residual battery power. in a robust plastic case to accoodate the tool and all the accessories. Two batteries and charger included. Ropes and conductors Rods MATERIAL COPPER ALUMINIUM ALMELEC STEEL MULTI STRANDS STEEL (STRANDS Qty 200) ACSR STEEL COPPER ALUMINIUM Cutting capacity TENSILE MAX CUTTING DIAMETER () STRENGTH (dan/2) B35-TC0 41 20 34 180 INDICATIVE EXAMPLES: 19 x 2,1 : Ø est. = 10,5 180 180 60 42 30 16 19 x 2,2 : Ø est. = 11,0 - INDICATIVE EXAMPLES: 26 x 2,50 + 7 x 1,95 : Ø est. = 15,85 26 x 3,06 + 7 x 2,38 : Ø est. = 19,38 26 x 3,60 + 7 x 2,80 : Ø est. = 22,80 10 - - 16 Max cutting Ø 377 114 66 9.6 V 2.0 Ah 3,0 Dimensions VAL P22 465x315xh116 1,5 * 6 PRISMA COMPONENTS - Tools
NEW TOOLS Hydraulic 18.0 V CORDLESS HYDRAULIC CUTTING TOOL OVERHEAD LINE APPLICATION B-TC0E Basic tool with battery and shoulder strap charger Plastic carrying casesuitable for storing the tool and accessories Next generation of 18.0 V cordless hydraulic cutting tool specifically designed to cut Copper, aldrey, Aluminium, Aluminium-Steel cables and Steel ropes, Aluminium and Steel rods having a max overall diameter of. The blades are manufactured from high strength special Steel, heat treated to ensure a long service life. New Li-Ion 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater cutting speed and cutting force result from a revitalised hydraulic system with double speed action. The battery is equipped with led indicators that indicate the remaining battery life at any time by pressing to enable the operator to work in the most comfortable position, and can easily be opened to allow cutting of running cables. Fitted with a maximum hydraulic pressure valve. Designed with improved balance, B-TC0E is easily manageable during the cutting process and, by the use of bi-component plastics, has a the adjacent button. The head can rotate through 180 degrees, shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area. Operating temperature: -15 to +50 C Max cutting Ø 300 337 83 18.0 V 4.0 Ah 4,65 Dimensions VALP37 500x480x128 3,1 * PRISMA COMPONENTS - Tools 7
14.4 V CORDLESS HYDRAULIC CUTTING TOOL INDUSTRIAL APPLICATION B-TC095 Basic tool with battery and shoulder strap charger Metal carrying case suitable for storing the tool and accessories 14.4 V cordless hydraulic cutting tool specifically designed to cut Copper, Aluminium and telecounication cable having a max overall diameter of 95. The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cutting. The blades are manufactured from high strength special Steel, heat treated to ensure a long service life. The head can be easily opened to allow the cutting of running cables. The head can rotate through 335 degrees, to enable the operator to work in the most comfortable position. Fitted with a maximum hydraulic pressure valve. Complete with a display which, after every operation and battery insertion, indicates the residual battery power. Extremely quiet in operation, with very little vibration. Ergonomically designed with a sculptured body for operator comfort. Max cutting Ø 95 527 305 94 14.4 V 3.0 Ah 7,06 Dimensions VAL B-TC095 565x410x132 6,7 * 8 PRISMA COMPONENTS - Tools