Rolling bearings Radial bearings Dimensional and geometrical tolerances

International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 November to 30 November 2011 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 4 ISO/CD 492 TC 17 ISO/WD 5950 TC 21 ISO/NP 7076-5 TC 22 ISO/NP 10924-3 ISO/NP 13674-2 ISO/NP 12614-3 ISO/NP 12614-4 ISO/NP 12614-5 ISO/NP 12614-6 ISO/NP 12614-7 ISO/NP 12614-8 Rolling bearings Rolling bearings Radial bearings Dimensional and geometrical tolerances Steel Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities Equipment for fire protection and fire fighting Fire protection Foam fire extinguishing systems Part 5: Compressed air foam equipment Road vehicles Road vehicles - Circuit breakers Part 3: Miniature circuit breakers Road vehicles Test method for the quantification of on-centre handling Part 2: Transition test Road vehicles Liquefied natural gas (LNG) fuel system components Part 3: Check valve Road vehicles Liquefied natural gas (LNG) fuel system components Part 4: Manual valve Road vehicles Liquefied natural gas (LNG) fuel system components Part 5: Automatic valve Road vehicles Liquefied natural gas (LNG) fuel system components Part 6: Tank pressure gauge Road vehicles Liquefied natural gas (LNG) fuel system components Part 7: Overpressure regulator Road vehicles Liquefied natural gas (LNG) fuel system components Part 8: Pressure relief valve

- primary ISO/NP 12614-9 ISO/NP 12614-10 ISO/NP 12614-11 ISO/NP 12614-12 ISO/NP 12614-13 ISO/NP 12614-14 ISO/NP 12614-15 ISO/NP 12614-16 ISO/NP 12614-17 Road vehicles Liquefied natural gas (LNG) fuel system components Part 9: Pressure relief valve - secondary Road vehicles Liquefied natural gas (LNG) fuel system components Part 10: Excess flow valve Road vehicles Liquefied natural gas (LNG) fuel system components Part 11: Gas-tight housing and ventilation hose Road vehicles Liquefied natural gas (LNG) fuel system components Part 12: Rigid fuel line in stainless steel Road vehicles Liquefied natural gas (LNG) fuel system components Part 13: Fittings Road vehicles Liquefied natural gas (LNG) fuel system components Part 14: Rigid fuel line in material other than stainless steel Road vehicles Liquefied natural gas (LNG) fuel system components Part 15: Pressure control regulator Road vehicles Liquefied natural gas (LNG) fuel system components Part 16: Differential pressure fuel content gauge Road vehicles Liquefied natural gas (LNG) fuel system components Part 17: Capacitance fuel content gauge ISO/NP 12614-18 Road vehicles Liquefied natural gas (LNG) fuel system components Part 18: Heat exchanger - vaporizer ISO/NP 12614-19 ISO/NP 12614-20 TC 23 ISO/CD 9912-2 ISO/CD 9912-3 ISO/CD 15639-1 ISO/WD 24631-5 TC 24 Road vehicles Liquefied natural gas (LNG) fuel system components Part 19: Natural gas detector Road vehicles Liquefied natural gas (LNG) fuel system components Part 20: Gas temperature sensor Tractors and machinery for agriculture and forestry Agricultural irrigation equipment Filters Part 2: Strainer-type filters Agricultural irrigation equipment Filters Part 3: Automatic self-cleaning strainer-type filters Standardization of injection sites for different animal species Part 1: Companion animals (cats and dogs) Radio frequency identification of animals RFID transceivers Part 5: Procedure for testing the capability of reading ISO 11784 and ISO 11785 transponders Particle characterization including sieving ISO/CD 13317-4 Determination of particle size distribution by gravitational liquid sedimentation methods Part 4: Balance method TC 28 ISO/CD 12924 ISO/CD 16861 TC 34 ISO/CD 17718 Petroleum products and lubricants Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Di-methyl ether (DME) for fuels Specifications Food products Cereals and cereal products Wheat whole meal and flour (T. aestivum) Determination of rheological behaviour as a function of mixing and temperature increase ISO/CD 12228-1 Determination of individual and total sterols contents Gas chromatographic method Part 1: Animal and vegetable fats and oils

ISO/CD 12228-2 TC 35 Determination of individual and total sterols contents Gas chromatographic method Part 2: Olive and olive pomace oils Paints and varnishes ISO/CD 2813 Paints and varnishes Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees ISO/CD 13803 TC 42 ISO/NP 18947 ISO/CD TS 22028-3 TC 43 ISO/NP 12999-1 TC 44 ISO/NP 17533 TC 59 ISO/CD 11617 ISO/CD TS 12911 TC 67 ISO/NP TS 16339 Paints and varnishes Determination of reflection haze on paint films at 20 degrees Photography Imaging materials Printed imaging materials Determination of abrasion, scuff, and smudge resistance of printed colour images Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB) Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation Welding and allied processes Welding for aerospace applications Welding data in design documents Buildings and civil engineering works Building construction Jointing products Test method to assess the durability of construction sealants Framework for building information modelling (BIM) guidance Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industry - Well control equipments for HPHT (High Pressure High Temperature) drilling operations ISO/CD 24817 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection TC 70 ISO/CD 15619 TC 85 ISO/CD 12749-2 ISO/NP 21613 TC 94 ISO/CD 16321 TC 106 ISO/CD 16635-1 ISO/CD 16635-2 TC 108 Internal combustion engines Measurement procedure for exhaust silencers of internal combustion engines Nuclear energy, nuclear technologies, and radiological protection Nuclear energy Vocabulary Part 2: Radiological protection (U, Pu)O2 powders and sintered pellets Determination of chlorine and fluorine Personal safety -- Protective clothing and equipment Occupational eye and face protection - requirements Dentistry Dentistry Rubber dam technique Part 1: Rubber dam punch Dentistry Rubber dam technique Part 2: Rubber dam clamp forceps Mechanical vibration, shock and condition monitoring

ISO/CD 18431-3 TC 127 Mechanical vibration and shock Signal processing Part 3: Methods of time-frequency and timescale analysis Earth-moving machinery ISO/NP TS 15998-2 Earth-moving machinery Machine control systems (MCS) using electronic components Part 2: Guidelines for the use and application of ISO 15998 TC 138 ISO/NP 4437-1 ISO/NP 4437-2 ISO/NP 4437-3 ISO/NP 4437-5 ISO/NP 17885 TC 146 ISO/NP 17734-1 ISO/NP 17734-2 TC 147 ISO/CD 17289 TC 172 ISO/CD 8600-1 ISO/NP 12858-1 TC 204 ISO/DTR 14806 TC 215 ISO/CD 13940 ISO/HL7 NP 13972-1 ISO/HL7 NP 13972-2 ISO/DTR 16278 TC 251 ISO/CD 55001 CASCO ISO/IEC WD 17067 Plastics pipes, fittings and valves for the transport of fluids Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 1: General Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 2: Pipes Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 3: Fittings Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 5: Fitness for purpose Plastics piping systems Mechanical fittings for pressure piping systems Specifications Air quality Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using dibutylamine derivatives Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives Water quality Water quality Determination of dissolved oxygen Optical sensor method Optics and photonics Endoscopes Medical endoscopes and endotherapy devices Part 1: General requirements Optics and optical instruments Ancillary devices for geodetic instruments Part 1: Invar levelling staffs Intelligent transport systems Intelligent transport systems Public transport requirements for the use of payment applications for fare media Health informatics Health informatics System of concepts to support continuity of care Health Informatics Detailed Clinical Models Part 1: Quality processes regarding detailed clinical model development, governance, publishing and maintenance Health Informatics Detailed Clinical Models Part 2: Quality attributes of detailed clinical models Health Informatics - Identification of the status of structures for representation of human anatomy within healthcare terminological systems Project committee: Asset management Asset management Requirements Committee on conformity assessment Conformity assessment Fundamentals of product certification

JTC 1 Information technology ISO/IEC CD 27000 Information technology Security techniques Information security management systems Overview and vocabulary ISO/IEC CD 27002 Information technology Security techniques Code of practice for information security controls DIS circulated Period from 01 November to 30 November 2011 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only Vote terminates TC 6 ISO/DIS 11093-8 ISO/DIS 8784-1 TC 8 ISO/DIS 16855 Paper, board and pulps Paper and board Testing of cores Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (Revision of ISO 11093-8:1997) * Pulp, paper and board Microbiological examination Part 1: Enumeration of bacteria and bacterial spores based on disintegration (Revision of ISO 8784-1:2005) Ships and marine technology * Ships and Marine Technology Loose gear of lifting appliances on ships General requirements 2012-04-23 2012-04-03 2012-04-16 ISO/DIS 16856 * Ships and Marine Technology Loose gear of lifting appliances on ships Hooks 2012-04-16 ISO/DIS 16857 * Ships and Marine Technology Loose gear of lifting appliances on ships Shackles 2012-04-16 ISO/DIS 16858 * Ships and Marine Technology Loose gear of lifting appliances on ships Pulleys 2012-04-16 TC 20 Aircraft and space vehicles ISO/DIS 17807 * Space data and information transfer systems - Asynchronous message service 2012-04-30 ISO/DIS 17808 ISO/DIS 17809 ISO/DIS 17810 ISO/DIS 22641 * Space data and information transfer systems Telemetry (TM) channel coding profiles * Space data and information transfer systems - Delta-differential one-way ranging (Delta-DOR) operations * Space data and information transfer systems Data transmission and pseudo-random noise (PN) ranging for 2 GHz code division multiple access (CDMA) link via data relay satellite * Space data and information transfer systems TM (telemetry) synchronization and channel coding (Revision of ISO 22641:2005) 2012-04-30 2012-04-30 2012-04-30 2012-04-09

TC 21 ISO 7240-24:2010/DAmd 1 ISO/DIS 6182-1 TC 22 ISO/DIS 20653 TC 23 ISO 7914:2002/DAmd 1 Equipment for fire protection and fire fighting Fire detection and fire alarm systems Part 24: Sound-system loudspeakers Amendment 1 * Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers (Revision of ISO 6182-1:2004) Road vehicles * Road vehicles Degrees of protection (IP-Code) Protection of electrical equipment against foreign objects, water and access (Revision of ISO 20653:2006) Tractors and machinery for agriculture and forestry * Forestry machinery Portable chain-saws Minimum handle clearance and sizes Amendment 1 2012-04-16 2012-04-24 2012-04-05 2012-05-01 ISO/DIS 24631-7 * Radiofrequency identification of animals Part 7: Synchronization of ISO 11785 identification systems 2012-04-15 TC 28 Petroleum products and lubricants ISO/DIS 9038 * Determination of sustained combustibility of liquids 2012-04-18 (Revision of ISO 9038:2002) TC 29 Small tools ISO/DIS 525 * Bonded abrasive products General requirements 2012-04-12 (Revision of ISO 525:1999) TC 34 ISO 21571:2005/DAmd 1 TC 44 ISO/DIS 12996 TC 67 ISO/DIS 12736 TC 69 Food products * Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Nucleic acid extraction Amendment 1 Welding and allied processes * Mechanical joining Destructive testing of joints Specimen dimensions and test procedure for tensile shear testing of single joints Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures Applications of statistical methods 2012-04-18 2012-04-04 2012-04-18 ISO/DIS 3534-3.2 * Statistics Vocabulary and symbols Part 3: Design of experiments 2012-01-03 (Revision of ISO 3534-3:1999) ISO/DIS 7870-2 * Control charts Part 2: Shewhart control charts 2012-04-12 (Revision of ISO 8258:1991) TC 71 ISO/DIS 16311-2 TC 76 Concrete, reinforced concrete and pre-stressed concrete Maintenance and repair of concrete structures Part 2: Assessment of existing concrete structures Transfusion, infusion and injection, and blood processing equipment 2012-04-24

for medical and pharmaceutical use ISO 8536-12:2007/DAmd 1 TC 92 * Infusion equipment for medical use Part 12: Check valves Amendment 1 2012-04-29 Fire safety ISO/DIS 29904 * Fire chemistry Generation and measurement of aerosols 2012-04-23 TC 106 Dentistry ISO/DIS 6873 * Dentistry Gypsum products 2012-04-18 (Revision of ISO 6873:1998) ISO 13397-2:2005/DAmd 1 TC 108 ISO/DIS 10819 TC 113 ISO/DIS 1100-1 TC 118 * Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Gr-type Amendment 1: Colour coding Mechanical vibration, shock and condition monitoring Mechanical vibration and shock Hand-arm vibration Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (Revision of ISO 10819:1996) Hydrometry * Hydrometry Measurement of liquid flow in open channels Part 1: Guidelines for selection, establishment and operation of a gauging station (Revision of ISO 1100-1:1996, ISO/TR 8363:1997) Compressors and pneumatic tools, machines and equipment 2012-04-25 2012-04-11 2012-04-04 ISO/DIS 11011 * Compressed air Energy efficiency Assessment 2012-04-08 TC 122 Packaging ISO/DIS 17351 * Packaging Braille on packaging for medicinal products 2012-04-30 TC 126 Tobacco and tobacco products ISO/DIS 3308 * Routine analytical cigarette-smoking machine Definitions and standard conditions 2012-04-11 (Revision of ISO 3308:2000, ISO 3308:2000/Amd 1:2009) TC 127 ISO/DIS 7133 Earth-moving machinery Earth-moving machinery Tractor-scrapers Terminology and commercial specifications (Revision of ISO 7133:1994) 2012-04-05 ISO/DIS 7134 Earth-moving machinery Graders Terminology and commercial specifications 2012-04-05 (Revision of ISO 7134:1993, ISO 7134:1993/Cor 1:1996) TC 147 ISO/DIS 15923-1 TC 150 Water quality * Water quality Determination of ions by a discrete analysis system and spectrophotometric detection Part 1: Ammonium, chloride, nitrate, nitrite, orthophosphate, silicate and sulfate Implants for surgery 2012-04-04 ISO/DIS 5838-1 * Implants for surgery Metallic skeletal pins and wires Part 1: General requirements 2012-04-22 (Revision of ISO 5838-1:1995) TC 164 Mechanical testing of metals

ISO/DIS 18265 * Metallic materials Conversion of hardness values 2012-04-04 (Revision of ISO 18265:2003) TC 172 ISO/DIS 17123-5 TC 189 Optics and photonics Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 5: Total stations (Revision of ISO 17123-5:2005) Ceramic tile 2012-04-29 ISO/DIS 10545-9 * Ceramic tiles Part 9: Determination of resistance to thermal shock 2012-04-25 (Revision of ISO 10545-9:2004) TC 199 ISO/DIS 13856-2 TC 204 ISO/DIS 15638-1 TC 206 ISO/DIS 14610 TC 215 Safety of machinery * Safety of machinery Pressure-sensitive protective devices Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars (Revision of ISO 13856-2:2005) Intelligent transport systems * Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 1: Framework and architecture Fine ceramics * Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of porous ceramics at room temperature Health informatics 2012-04-11 2012-04-12 2012-04-04 ISO/DIS 27789.2 * Health informatics Audit trails for electronic health records 2012-01-04 JTC 1 Information technology ISO/IEC DIS 40500 Information technology W3C Web Content Accessibility Guidelines (WCAG) 2.0 2012-04-16 ISO/IEC DIS 7812-1 Identification cards Identification of issuers Part 1: Numbering system 2012-04-18 (Revision of ISO/IEC 7812-1:2006) ISO/IEC DIS 7812-2 ISO/IEC DIS 7816-4 Identification cards Identification of issuers Part 2: Application and registration procedures (Revision of ISO/IEC 7812-2:2007) Identification cards Integrated circuit cards Part 4: Organization, security and commands for interchange (Revision of ISO/IEC 7816-4:2005, ISO/IEC 7816-4:2005/Amd 1:2008) 2012-04-18 2012-05-01 ISO/IEC DIS 1001 Information technology File structure and labelling of magnetic tapes for information interchange (Revision of ISO 1001:1986) 2012-04-22 ISO/IEC DIS 27013 Information technology Security techniques Guidelines on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 2012-04-16 ISO/IEC DIS 27014 Information technology Security techniques Governance of information security 2012-04-12 ISO/IEC DIS 29115 Information technology Security techniques Entity authentication assurance framework 2012-04-24

FDIS circulated Period from 01 November to 30 November 2011 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only Vote terminates TC 4 Rolling bearings ISO 355:2007/FDAmd 1 * Rolling bearings Tapered roller bearings Boundary dimensions and series designations Amendment 1 2012-01-17 TC 21 Equipment for fire protection and fire fighting ISO/FDIS 21927-9 * Smoke and heat control systems Part 9: Specification for control equipment 2012-01-31 TC 23 Tractors and machinery for agriculture and forestry ISO/FDIS 11783-2 * Tractors and machinery for agriculture and forestry Serial control and communications data network Part 2: Physical layer 2012-01-17 (Revision of ISO 11783-2:2002, ISO 11783-2:2002/Cor 1:2003, ISO 11783-2:2002/Amd 1:2006) ISO/FDIS 11783-9 * Tractors and machinery for agriculture and forestry Serial control and communications data network Part 9: Tractor ECU 2012-01-16 (Revision of ISO 11783-9:2002) TC 29 Small tools ISO/FDIS 6987 * Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole Dimensions 2012-01-16 (Revision of ISO 6987:1998) TC 31 Tyres, rims and valves ISO/FDIS 9413 * Tyre valves Dimensions and designation 2012-01-22 (Revision of ISO 9413:1998, ISO 9413:1998/Amd 1:2001, ISO 9413:1998/Amd 2:2004) TC 34 Food products ISO/FDIS 11746 * Rice Determination of biometric characteristics of kernels 2012-01-04 TC 35 Paints and varnishes ISO/FDIS 8503-1 * Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

(Revision of ISO 8503-1:1988) ISO/FDIS 8503-2 * Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel Comparator procedure (Revision of ISO 8503-2:1988) ISO/FDIS 8503-3 * Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile Focusing microscope procedure (Revision of ISO 8503-3:1988) ISO/FDIS 8503-4 * Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile Stylus instrument procedure (Revision of ISO 8503-4:1988) TC 58 Gas cylinders ISO/FDIS 11114-1 * Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials 2012-01-18 (Revision of ISO 11114-1:1997) TC 61 Plastics ISO/FDIS 527-1 * Plastics Determination of tensile properties Part 1: General principles (Revision of ISO 527-1:1993, ISO 527-1:1993/Cor 1:1994, ISO 527-1:1993/Amd 1:2005) ISO/FDIS 527-2 * Plastics Determination of tensile properties Part 2: Test conditions for moulding and extrusion plastics (Revision of ISO 527-2:1993, ISO 527-2:1993/Cor 1:1994) ISO/FDIS 1622-1 * Plastics Polystyrene (PS) moulding and extrusion materials Part 1: Designation system and basis for specifications (Revision of ISO 1622-1:1994) TC 68 Financial services ISO/FDIS 11568-2 * Financial services Key management (retail) Part 2: Symmetric ciphers, their key management and life cycle 2012-01-12 (Revision of ISO 11568-2:2005) TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO/FDIS 1135-4 * Transfusion equipment for medical use Part 4: Transfusion sets for single use 2012-02-04 (Revision of ISO 1135-4:2010) TC 86 ISO 23953-1:2005/FDAmd 1 Refrigeration and air-conditioning * Refrigerated display cabinets Part 1: Vocabulary Amendment 1 2012-01-18 ISO 23953-2:2005/FDAmd 1 TC 96 * Refrigerated display cabinets Part 2: Classification, requirements and test conditions Amendment 1 Cranes 2012-01-18

ISO/FDIS 11660-4 * Cranes Access, guards and restraints Part 4: Jib cranes 2012-01-12 TC 106 IEC/FDIS 80601-2-60 TC 108 Dentistry Medical electrical equipment Part 2-60: Particular requirements for basic safety and essential performance of dental equipment Mechanical vibration, shock and condition monitoring 2012-01-26 ISO/FDIS 18312-2 * Mechanical vibration and shock Measurement of vibration power flow from machines into connected support structures Part 2: Indirect method ISO/FDIS 13374-3 * Condition monitoring and diagnostics of machines Data processing, communication and presentation Part 3: Communication 2012-01-04 2012-01-31 TC 110 Industrial trucks ISO/FDIS 22915-13 * Industrial trucks Verification of stability Part 13: Rough-terrain trucks with mast 2012-01-31 (Revision of ISO 8379:1998, ISO 8379:1998/Amd 1:2001) TC 123 Plain bearings ISO/FDIS 14287 * Plain bearings Pad materials for tilting pad bearings 2012-01-18 TC 131 Fluid power systems ISO/FDIS 16431 * Hydraulic fluid power System clean-up procedures and verification of cleanliness of assembled systems 2012-01-04 (Revision of ISO/TS 16431:2002) TC 146 Air quality ISO/FDIS 15202-2 * Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation 2012-01-11 (Revision of ISO 15202-2:2001) ISO/FDIS 28902-1 * Air quality Environmental meteorology Part 1: Ground-based remote sensing of visual range by lidar 2012-01-03 TC 147 Water quality ISO/FDIS 8692 * Water quality Freshwater algal growth inhibition test with unicellular green algae (Revision of ISO 8692:2004) TC 156 Corrosion of metals and alloys ISO/FDIS 12696 * Cathodic protection of steel in concrete 2012-01-18 (Revision of ISO/DIS 12696) TC 157 Non-systemic contraceptives and STI barrier prophylactics ISO 8009:2004/FDAmd 1 * Mechanical contraceptives Reusable natural and silicone rubber contraceptive diaphragms Requirements and tests Amendment 1 2012-01-31 TC 171 Document management applications ISO/FDIS 14641-1 * Electronic archiving Part 1: Specifications concerning the design and the operation of an information system for electronic information preservation 2012-01-15 TC 172 Optics and photonics ISO 11979- * Ophthalmic implants Intraocular lenses Part 7: Clinical investigations 2012-01-04

7:2006/FDAmd 1 Amendment 1 TC 173 Assistive products for persons with disability ISO/FDIS 23599 * Assistive products for blind and vision-impaired persons Tactile walking surface indicators 2012-01-26 TC 184 Automation systems and integration ISO/FDIS 8373 * Robots and robotic devices Vocabulary 2012-01-31 (Revision of ISO 8373:1994, ISO 8373:1994/Amd 1:1996, ISO 8373:1994/Cor 1:1996) TC 190 Soil quality ISO/FDIS 12914 * Soil quality Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements 2012-01-22 TC 201 Surface chemical analysis ISO/FDIS 11039 * Surface chemical analysis Scanning-probe microscopy Measurement of drift rate 2012-01-17 TC 218 Timber ISO/FDIS 3129 * Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens 2012-01-09 (Revision of ISO 3129:1975) TC 219 Floor coverings ISO/FDIS 10361 * Textile floor coverings Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester 2012-01-31 (Revision of ISO 10361:2000) IULTCS International Union of Leather Technologists and Chemists Societies ISO/FDIS 14088 * Leather Chemical tests Quantitative analysis of tanning agents by filter method 2012-01-04 CASCO Committee on conformity assessment ISO/IEC FDIS 17020 * Conformity assessment Requirements for the operation of various types of bodies performing inspection 2012-01-18 (Revision of ISO/IEC 17020:1998) JTC 1 Information technology ISO/IEC FDIS 15504-5 * Information technology Process assessment Part 5: An exemplar software life cycle process assessment model 2012-01-11 (Revision of ISO/IEC 15504-5:2006, ISO/IEC 15504-5:2006/DAM 1) ISO/IEC 10373-6:2011/FDAmd 1 * Identification cards Test methods Part 6: Proximity cards Amendment 1: Additional PICC classes (Revision of ISO/IEC 10373-6:2001/DAM 1) 2012-01-09 ISO/IEC 18013-3:2009/FDAmd 1 * Information technology Personal identification ISO-compliant driving licence Part 3: Access control, authentication and integrity validation Amendment 1: Scanning area identifier Optional machine readable zone 2012-01-23 ISO/IEC FDIS 10967-1 * Information technology Language independent arithmetic Part 1: Integer and floating point arithmetic 2012-01-30

(Revision of ISO/IEC 10967-1:1994) ISO/IEC FDIS 23271 * Information technology Common Language Infrastructure (CLI) 2012-01-29 (Revision of ISO/IEC 23271:2006) ISO/IEC FDIS 14543-5-3 * Information technology Home electronic system (HES) architecture Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 Basic application ISO/IEC FDIS 14543-5-5 * Information technology Home electronic system (HES) architecture Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 Device type ISO/IEC FDIS 14543-5-6 * Information technology Home electronic system (HES) architecture Intelligent grouping and resource sharing for HES Class 2 and Class 3 Part 5-6: Service type 2012-01-05 2012-01-05 2012-01-05 ISO/IEC FDIS 14543-5- 21 * Information technology Home electronic system (HES) architecture Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 Application profile AV profile 2012-01-05 ISO/IEC FDIS 14763-2 * Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation 2012-01-08 (Revision of ISO/IEC TR 14763-2:2000) ISO/IEC FDIS 23001-7 * Information technology MPEG systems technologies Part 7: Common encryption in ISO base media file format files ISO/IEC FDIS 23003-3 * Information technology MPEG audio technologies Part 3: Unified speech and audio coding ISO/IEC FDIS 15961-1 * Information technology Radio frequency identification (RFID) for item management: Data protocol Part 1: Application interface 2012-01-02 2012-01-24 2012-01-24 (Revision of ISO/IEC 15961:2004) ISO/IEC FDIS 15962 * Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions 2012-01-22 (Revision of ISO/IEC 15962:2004) ISO/IEC FDIS 18047-2 * Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 khz 2012-01-09 (Revision of ISO/IEC TR 18047-2:2006) ISO/IEC/IEEE FDIS 21451-7 * Information technology Smart transducer interface for sensors and actuators Part 7: Transducer to radio frequency identification (RFID) systems communication protocols and Transducer Electronic Data Sheet (TEDS) formats 2012-01-09 ISO/IEC FDIS 15944-8 * Information technology Business Operational View Part 8: Identification of privacy protection requirements as external constraints on business transactions 2012-01-11 ISO/IEC 26300:2006/FDAmd 1 * Information technology Open Document Format for Office Applications (OpenDocument) v1.0 Amendment 1: Open Document Format for Office Applications (OpenDocument) v1.1 ISO/IEC FDIS 19785-2 * Information technology Common Biometric Exchange Formats Framework Part 2: Procedures for the operation of the Biometric Registration Authority (Revision of ISO/IEC 19785-2:2006, ISO/IEC 19785-2:2006/Amd 1:2010) ISO/IEC FDIS 19795-6 * Information technology Biometric performance testing and reporting Part 6: Testing methodologies for operational evaluation ISO/IEC FDIS 16680 * Information technology The Open Group Service Integration Maturity Model (OSIMM) 2012-01-09 2012-01-09