Evaporator Coils Back Mount Coils ( Back Bar ) Top Mount Thin Profile Coils High Performance Mullion Coils
The AMCO High Performance Coils AMCO high performance direct expansion evaporator coils are designed and engineered for efficient performance and the best airflow in medium and low temp applications. The performance capabilities are excellent for maintaining desired temperatures while minimizing the moisture loss of product. We are able to achieve this high level of performance by the patented unique design of our stainless steel bodied coils along with an additional 37% increase in and fan performance due to EBM s German made fans. We offer our coil in various capacities and three styles: wall mount, ceiling mount and mullion. Any coil can be customized to your application upon request. Our failure rate on our coils is less than one half of one percent and many of those failures are due to improper installation. Full Prep Coil: Furnished with all controls Master Coil : Furnished with all Controls & Liquid line for slave coil Slave Coil: Furnished with Thermostatic Expansion Valve only Bare Coil : No Controls (Controls & Refrigeration Pipes are available upon customer request) Labor Warranty (1) one year Consult factory when special piping configurations are required
ENHANCED DESIGN FEATURES Coil Body A. Entire coil body constructed with 100% Stainless Steel B. 20 gauge 304 S.S Frame & Drain Pan C. Unique design allows for unrestricted airflow D. Complete coil designed and built in our facility E. Coil body warranty is 5 years Fin Coil A. High Performance Fin Type coil B. Corrosion Resistant Electro Plated coating C. Evaporator Fin Coil made by leading U.S. coil manufacturer D. No galvanized material is used in the coil E. Fin Coil corrosion warranty is 5 years Fan Assembly A. Impeller: Fiberglass-reinforced PA plastic B. Bearing : Sintec sleeve bearing system C. Fan Guard: Stainless Steel wire guard to protect fan assembly D. Protection: Fan motor Protected from overload using impedance protection E. Current: Low Amps draw F. Warranty: 42,500 Hours run time Thermostat A. Digital control warranty is 2 years B. Auto defrost system in every Medium & Low Temp Coil C. Flex-temp mode D. Program locking capability E. Alarm set point capability Expansion Valves A. Danfoss TUB stainless steel body B. Valve orifice designed for proper load performance C. Auto superheat adjustment D. Soldered Connection for enhanced leak protection E. Valve Brazed with 56% Silver Brazing Solenoid Valve A. Danfoss NEV Valve warranty is 2 years B. High Performance Mini Valve C. Soldered connection for enhanced leak protection D. Valve Brazed with 56% Silver Brazing E. Specially designed for AMCO requirements
BACK MOUNT (BACK BAR) AMCO Model AMT & ALT is a pre-prep single line connection available in medium and low temperature. Compact back wall-mounted coils featuring a low height making them ideal for under counter reach-in or drawer type fixtures. The coils draw air in at the bottom and discharge out the front. usually onto drop-in trays of condiments in salad bar or sandwich preparation fixtures. A Z-type mounting angle bracket is included to position the unit 3/4 off the wall, allowing for optimum air circulation and performance. Low Height Medium Temp # MODEL COIL OPTION FREON VOLTAGE DEFROST POINT BTUH 1 AMT1250S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 120 1 10⁰ F TD 1250 2 AMT1250J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 120 1 10⁰ F TD 1250 3 AMT1750S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1750 4 AMT1750J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1750 5 AMT2250S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 360 3 10⁰ F TD 2250 6 AMT2250J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 360 3 10⁰ F TD 2250 Low Height Low Temp # MODEL COIL OPTION FREON VOLTAGE DEFROST POINT BTUH 1 ALT1150S MASTER/SLAVE R-404A 115/1/60 ELECTRIC 120 1 10⁰ F TD 1150 2 ALT1150J MASTER/SLAVE R-134A 115/1/60 ELECTRIC 120 1 10⁰ F TD 1150 3 ALT1650S MASTER/SLAVE R-404A 115/1/60 ELECTRIC 240 2 10⁰ F TD 1650 4 ALT1650J MASTER/SLAVE R-134A 115/1/60 ELECTRIC 240 2 10⁰ F TD 1650 5 ALT2150S MASTER/SLAVE R-404A 115/1/60 ELECTRIC 360 3 10⁰ F TD 2150 6 ALT2150J MASTER/SLAVE R-134A 115/1/60 ELECTRIC 360 3 10⁰ F TD 2150 PHYSICAL DATA W1 MODEL L H1 H2 W1 W2 H1 H2 AMT1250 ALT1150 AMT1750 ALT1750 17.5 13.5 13¾ 2.62 4.0 24.5 13.5 13¾ 2.62 4.0 AMT2250 ALT2250 32.0 13.5 13¾ 2.62 4.0 L W2
TOP MOUNT THIN PROFILE AMCO Model ACMT is a pre-prep single line connection, thin profile air defrost unit which mounts in the top of a refrigerator and makes the entire top shelf area usable. The attractive low silhouette makes the unit particularly desirable for display type refrigerators. It can also be used in back bars, under counter cabinets, or wherever space is at a premium and is ideal for 35 to 45 F fixtures at 10 to 15 TD applications with 16 hours maximum compressor run time per day. CELING MOUNT MEDIUM TEMP. # MODEL COIL OPTION FREON VOLTAGE DEFROST POINT BTU 1 ACMT1000S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 90 1 10⁰ F TD 1000 2 ACMT1000J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 90 1 10⁰ F TD 1000 3 ACMT1300S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 180 2 10⁰ F TD 1300 4 ACMT1300J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 180 2 10⁰ F TD 1300 5 ACMT1750S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1750 6 ACMT1750J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1750 OPTION. 208/230V/1PH COIL PHYSICAL DATA MODEL W D H ACMT1000 15.0 13.5 4.50 36 F D H ACMT1300 18.0 13.5 4.50 ACMT1750 25.0 13.5 4.50 W
HIGH PERFORMANCE MULLION COILS AMCO Model AMMT is a pre-prep single line connection ideal for under-counter reach-in refrigerators. The thin line design allows the unit to be mounted behind the mullion with sufficient clearance for tray slides. A down flow fan arrangement is used with air drawn in at the top and discharged at the bottom. This design provides superior air circulation and ensures a uniform temperature throughout the cabinet. This versatile design is also adaptable for mounting on the back wall or ends of a cooler. The method of air circulation ensures minimum box temperature rise when the cabinet doors are open. Ideal for bottled goods and beverage coolers. MULLION MEDIUM TEMP. # MODEL COIL OPTION FREON VOLTAGE DEFROST POINT ⁰ F BTU 1 AMMT1400S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 160 2 10⁰ F TD 1400 2 AMMT1400J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 160 2 10⁰ F TD 1400 3 AMMT1800S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1800 4 AMMT1800J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1800 5 AMMT2400S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 2400 6 AMMT2400J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 2400 OPTION. 208/230V/1PH COIL PHYSICAL DATA ELECTRICAL CONNECTION REFRIGERATION CONNECTION MOUNTING BRACKETS D H 1 ¼ W 36 F MODEL H W D AMMT1400 16.5 15.5 5.25 AMMT1800 16.5 15.5 5.25 AMMT2400 16.5 22.0 5.25
HIGH PERFORMANCE REVERSE MULLION COILS AMCO Model AMRMT is a pre-prep single line connection ideal for under-counter reach-in refrigerators, under-counter drawer type refrigerators and salad bars. The unit is suitable for mounting behind a mullion or on a wall. An up flow air pattern is used with air drawn in at the bottom and discharged out the top. This provides an optimum temperature for drop in trays on salad bars or prep tables. It also keeps drawer stored product in premium condition. This feature provides excellent air distribution over drop in trays or containers. Food in the trays and containers stays colder, lasts longer, and retains the desired appearance. REVERSE MULLION MEDIUM TEMP. # MODEL COIL OPTION FREON VOLTAGE DEFROST POINT ⁰ F BTU 1 AMRMT1400S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 160 2 10⁰ F TD 1400 2 AMRMT1400J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 160 2 10⁰ F TD 1400 3 AMRMT1800S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1800 4 AMRMT1800J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 1800 5 AMRMT2400S MASTER/SLAVE R-404A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 2400 6 AMRMT2400J MASTER/SLAVE R-134A 115/1/60 AIR DEFROST 240 2 10⁰ F TD 2400 OPTION. 208/230V/1PH COIL PHYSICAL DATA ELECTRICAL CONNECTION REFRIGERATION CONNECTION MOUNTING BRACKETS H 1 ¼ 36 F MODEL H W D AMRMT1400 16.5 15.5 5.25 AMRMT1800 16.5 15.5 5.25 AMRMT2400 16.5 22.0 5.25 D W
Due to continuing product development, specifications are subject to change without notice. Amco Mechanical Inc. 15116 Sierra Bonita Ln. Chino, CA 91710 Tel: (866)414-2626, Fax: (866)269-0704 www.amcomechanical.com